From e81a7bd55531a77d8c16d44766db4089c2983f1b Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Sun, 5 Feb 2012 15:51:53 +0200 Subject: zd1211rw: firmware needs duration_id set to zero for non-pspoll frames Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111 Reported-by: Tomas Vanek [modified original patch from bug-report, added check for pspoll frame] Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/wireless/zd1211rw') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 0a70149df3fc..98a574a4a465 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -866,6 +866,14 @@ static int fill_ctrlset(struct zd_mac *mac, ZD_ASSERT(frag_len <= 0xffff); + /* + * Firmware computes the duration itself (for all frames except PSPoll) + * and needs the field set to 0 at input, otherwise firmware messes up + * duration_id and sets bits 14 and 15 on. + */ + if (!ieee80211_is_pspoll(hdr->frame_control)) + hdr->duration_id = 0; + txrate = ieee80211_get_tx_rate(mac->hw, info); cs->modulation = txrate->hw_value; -- cgit v1.2.3