From ef8a2e27289ee1b24e743c4302a053b128e16284 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Tue, 17 Dec 2019 18:07:42 +0100 Subject: net: macb: fix probing of PHY not described in the dt This patch fixes the case where the PHY isn't described in the device tree. This is due to the way the MDIO bus is registered in the driver: whether the PHY is described in the device tree or not, the bus is registered through of_mdiobus_register. The function masks all the PHYs and only allow probing the ones described in the device tree. Prior to the Phylink conversion this was also done but later on in the driver the MDIO bus was manually scanned to circumvent the fact that the PHY wasn't described. This patch fixes it in a proper way, by registering the MDIO bus based on if the PHY attached to a given interface is described in the device tree or not. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 9c767ee252ac..c5ee363ca5dc 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -664,9 +664,30 @@ static int macb_mii_probe(struct net_device *dev) return 0; } +static int macb_mdiobus_register(struct macb *bp) +{ + struct device_node *child, *np = bp->pdev->dev.of_node; + + /* Only create the PHY from the device tree if at least one PHY is + * described. Otherwise scan the entire MDIO bus. We do this to support + * old device tree that did not follow the best practices and did not + * describe their network PHYs. + */ + for_each_available_child_of_node(np, child) + if (of_mdiobus_child_is_phy(child)) { + /* The loop increments the child refcount, + * decrement it before returning. + */ + of_node_put(child); + + return of_mdiobus_register(bp->mii_bus, np); + } + + return mdiobus_register(bp->mii_bus); +} + static int macb_mii_init(struct macb *bp) { - struct device_node *np; int err = -ENXIO; /* Enable management port */ @@ -688,9 +709,7 @@ static int macb_mii_init(struct macb *bp) dev_set_drvdata(&bp->dev->dev, bp->mii_bus); - np = bp->pdev->dev.of_node; - - err = of_mdiobus_register(bp->mii_bus, np); + err = macb_mdiobus_register(bp); if (err) goto err_out_free_mdiobus; -- cgit v1.2.3