From ff03f0b152ef55b9badede83203a2ac56eefb452 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 26 Feb 2020 10:24:12 +0000 Subject: net: mvneta: use resolved link config in mac_link_up() Convert the Marvell mvneta ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 55 ++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 9af3f8d5b289..b22eeb5f8700 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3830,13 +3830,9 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode, new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE; new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE | MVNETA_GMAC_INBAND_RESTART_AN | - MVNETA_GMAC_CONFIG_MII_SPEED | - MVNETA_GMAC_CONFIG_GMII_SPEED | MVNETA_GMAC_AN_SPEED_EN | MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL | - MVNETA_GMAC_CONFIG_FLOW_CTRL | MVNETA_GMAC_AN_FLOW_CTRL_EN | - MVNETA_GMAC_CONFIG_FULL_DUPLEX | MVNETA_GMAC_AN_DUPLEX_EN); /* Even though it might look weird, when we're configured in @@ -3851,24 +3847,20 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode, if (phylink_test(state->advertising, Pause)) new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL; - if (state->pause & MLO_PAUSE_TXRX_MASK) - new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL; if (!phylink_autoneg_inband(mode)) { - /* Phy or fixed speed */ - if (state->duplex) - new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; - - if (state->speed == SPEED_1000 || state->speed == SPEED_2500) - new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED; - else if (state->speed == SPEED_100) - new_an |= MVNETA_GMAC_CONFIG_MII_SPEED; + /* Phy or fixed speed - nothing to do, leave the + * configured speed, duplex and flow control as-is. + */ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { /* SGMII mode receives the state from the PHY */ new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE; new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | - MVNETA_GMAC_FORCE_LINK_PASS)) | + MVNETA_GMAC_FORCE_LINK_PASS | + MVNETA_GMAC_CONFIG_MII_SPEED | + MVNETA_GMAC_CONFIG_GMII_SPEED | + MVNETA_GMAC_CONFIG_FULL_DUPLEX)) | MVNETA_GMAC_INBAND_AN_ENABLE | MVNETA_GMAC_AN_SPEED_EN | MVNETA_GMAC_AN_DUPLEX_EN; @@ -3877,7 +3869,8 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode, new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X; new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | - MVNETA_GMAC_FORCE_LINK_PASS)) | + MVNETA_GMAC_FORCE_LINK_PASS | + MVNETA_GMAC_CONFIG_MII_SPEED)) | MVNETA_GMAC_INBAND_AN_ENABLE | MVNETA_GMAC_CONFIG_GMII_SPEED | /* The MAC only supports FD mode */ @@ -3977,8 +3970,36 @@ static void mvneta_mac_link_up(struct phylink_config *config, if (!phylink_autoneg_inband(mode)) { val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~MVNETA_GMAC_FORCE_LINK_DOWN; + val &= ~(MVNETA_GMAC_FORCE_LINK_DOWN | + MVNETA_GMAC_CONFIG_MII_SPEED | + MVNETA_GMAC_CONFIG_GMII_SPEED | + MVNETA_GMAC_CONFIG_FLOW_CTRL | + MVNETA_GMAC_CONFIG_FULL_DUPLEX); val |= MVNETA_GMAC_FORCE_LINK_PASS; + + if (speed == SPEED_1000 || speed == SPEED_2500) + val |= MVNETA_GMAC_CONFIG_GMII_SPEED; + else if (speed == SPEED_100) + val |= MVNETA_GMAC_CONFIG_MII_SPEED; + + if (duplex == DUPLEX_FULL) + val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; + + if (tx_pause || rx_pause) + val |= MVNETA_GMAC_CONFIG_FLOW_CTRL; + + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); + } else { + /* When inband doesn't cover flow control or flow control is + * disabled, we need to manually configure it. This bit will + * only have effect if MVNETA_GMAC_AN_FLOW_CTRL_EN is unset. + */ + val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + val &= ~MVNETA_GMAC_CONFIG_FLOW_CTRL; + + if (tx_pause || rx_pause) + val |= MVNETA_GMAC_CONFIG_FLOW_CTRL; + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); } -- cgit v1.2.3