From a8157ff3607eccb21efd4eb2ca46ff0cc488d12d Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 21 Nov 2019 09:58:10 -0800 Subject: nvme: add error message on mismatching controller ids We've seen a few devices that return different controller id's to the Fabric Connect command vs the Identify(controller) command. It's currently hard to identify this failure by existing error messages. It comes across as a (re)connect attempt in the transport that fails with a -22 (-EINVAL) status. The issue is compounded by older kernels not having the controller id check or had the identify command overwrite the fabrics controller id value before it checked. Both resulted in cases where the devices appeared fine until more recent kernels. Clarify the reject by adding an error message on controller id mismatches. Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/nvme') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 8e8527408db3..e6ee34376c5e 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2862,6 +2862,10 @@ int nvme_init_identify(struct nvme_ctrl *ctrl) * admin connect */ if (ctrl->cntlid != le16_to_cpu(id->cntlid)) { + dev_err(ctrl->device, + "Mismatching cntlid: Connect %u vs Identify " + "%u, rejecting\n", + ctrl->cntlid, le16_to_cpu(id->cntlid)); ret = -EINVAL; goto out_free; } -- cgit v1.2.3