From 8a182c2e4b661ec2a4056c93557258f089f14fe7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 3 Oct 2015 19:13:22 +0100 Subject: PCI: mvebu: Use gpio_desc to carry around gpio Use a gpio_desc to carry around the gpio, so we can then make use of the GPIOF_ACTIVE_LOW property rather than carrying that around as well. This also avoids needing to use gpio_is_valid() to check whether we have a GPIO; checking for a non-NULL descriptor is simpler. Tested-by: Willy Tarreau (Iomega iConnect Kirkwood, MiraBox Armada 370) Tested-by: Andrew Lunn (D-Link DIR664 Kirkwood) Tested-by: Thomas Petazzoni (Armada XP GP) Signed-off-by: Russell King Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Petazzoni --- drivers/pci/host/pci-mvebu.c | 39 ++++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 15 deletions(-) (limited to 'drivers/pci/host') diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 7282bb06c7a8..ab619ee0ef49 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -119,8 +119,7 @@ struct mvebu_pcie_port { unsigned int io_target; unsigned int io_attr; struct clk *clk; - int reset_gpio; - int reset_active_low; + struct gpio_desc *reset_gpio; char *reset_name; struct mvebu_sw_pci_bridge bridge; struct device_node *dn; @@ -940,7 +939,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, { struct device *dev = &pcie->pdev->dev; enum of_gpio_flags flags; - int ret; + int reset_gpio, ret; port->pcie = pcie; @@ -980,15 +979,15 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, port->io_attr = -1; } - port->reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, - &flags); - if (port->reset_gpio == -EPROBE_DEFER) { - ret = port->reset_gpio; + reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags); + if (reset_gpio == -EPROBE_DEFER) { + ret = reset_gpio; goto err; } - if (gpio_is_valid(port->reset_gpio)) { - port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; + if (gpio_is_valid(reset_gpio)) { + unsigned long gpio_flags; + port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset", port->name); if (!port->reset_name) { @@ -996,13 +995,24 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, goto err; } - ret = devm_gpio_request_one(dev, port->reset_gpio, - GPIOF_DIR_OUT, port->reset_name); + if (flags & OF_GPIO_ACTIVE_LOW) { + dev_info(dev, "%s: reset gpio is active low\n", + of_node_full_name(child)); + gpio_flags = GPIOF_ACTIVE_LOW | + GPIOF_OUT_INIT_LOW; + } else { + gpio_flags = GPIOF_OUT_INIT_HIGH; + } + + ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags, + port->reset_name); if (ret) { if (ret == -EPROBE_DEFER) goto err; goto skip; } + + port->reset_gpio = gpio_to_desc(reset_gpio); } port->clk = of_clk_get_by_name(child, NULL); @@ -1104,15 +1114,14 @@ static int mvebu_pcie_probe(struct platform_device *pdev) if (!child) continue; - if (gpio_is_valid(port->reset_gpio)) { + if (port->reset_gpio) { u32 reset_udelay = 20000; of_property_read_u32(child, "reset-delay-us", &reset_udelay); - gpio_set_value_cansleep(port->reset_gpio, - !!port->reset_active_low); - msleep(reset_udelay/1000); + gpiod_set_value_cansleep(port->reset_gpio, 0); + msleep(reset_udelay / 1000); } ret = clk_prepare_enable(port->clk); -- cgit v1.2.3