From 1a680b7c325882188865f05b9a88d32f75f26495 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Mon, 21 Mar 2011 03:29:08 +0000 Subject: PCI: PCIe links may not get configured for ASPM under POWERSAVE mode v3 -> v2: Moved ASPM enabling logic to pci_set_power_state() v2 -> v1: Preserved the logic in pci_raw_set_power_state() : Added ASPM enabling logic after scanning Root Bridge : http://marc.info/?l=linux-pci&m=130046996216391&w=2 v1 : http://marc.info/?l=linux-pci&m=130013164703283&w=2 The assumption made in commit 41cd766b065970ff6f6c89dd1cf55fa706c84a3d (PCI: Don't enable aspm before drivers have had a chance to veto it) that pci_enable_device() will result in re-configuring ASPM when aspm_policy is POWERSAVE is no longer valid. This is due to commit 97c145f7c87453cec90e91238fba5fe2c1561b32 (PCI: read current power state at enable time) which resets dev->current_state to D0. Due to this the call to pcie_aspm_pm_state_change() is never made. Note the equality check (below) that returns early: ./drivers/pci/pci.c: pci_raw_set_pci_power_state() 546 /* Check if we're already there */ 547 if (dev->current_state == state) 548 return 0; Therefore OSPM never configures the PCIe links for ASPM to turn them "on". Fix it by configuring ASPM from the pci_enable_device() code path. This also allows a driver such as the e1000e networking driver a chance to disable ASPM (L0s, L1), if need be, prior to enabling the device. A driver may perform this action if the device is known to mis-behave wrt ASPM. Signed-off-by: Naga Chumbalkar Acked-by: Rafael J. Wysocki Cc: Matthew Garrett Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/pci/pcie') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index bbdb4fd85b9c..e61b82e611c2 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -708,6 +708,28 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev) up_read(&pci_bus_sem); } +void pcie_aspm_powersave_config_link(struct pci_dev *pdev) +{ + struct pcie_link_state *link = pdev->link_state; + + if (aspm_disabled || !pci_is_pcie(pdev) || !link) + return; + + if (aspm_policy != POLICY_POWERSAVE) + return; + + if ((pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT) && + (pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)) + return; + + down_read(&pci_bus_sem); + mutex_lock(&aspm_lock); + pcie_config_aspm_path(link); + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + mutex_unlock(&aspm_lock); + up_read(&pci_bus_sem); +} + /* * pci_disable_link_state - disable pci device's link state, so the link will * never enter specific states -- cgit v1.2.3