From 1a8c251cff2052b60009a070173308322e9600d3 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 3 Aug 2023 16:58:56 +0300 Subject: PCI: move OF status = "disabled" detection to dev->match_driver The blamed commit has broken probing on arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0 (PCI function 0) has status = "disabled". Background: pci_scan_slot() has logic to say that if the function 0 of a device is absent, the entire device is absent and we can skip the other functions entirely. Traditionally, this has meant that pci_bus_read_dev_vendor_id() returns an error code for that function. However, since the blamed commit, there is an extra confounding condition: function 0 of the device exists and has a valid vendor id, but it is disabled in the device tree. In that case, pci_scan_slot() would incorrectly skip the entire device instead of just that function. In the case of NXP LS1028A, status = "disabled" does not mean that the PCI function's config space is not available for reading. It is, but the Ethernet port is just not functionally useful with a particular SerDes protocol configuration (0x9999) due to pinmuxing constraints of the Soc. So, pci_scan_slot() skips all other functions on the ENETC ECAM (enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had to not be probed. There is an additional regression introduced by the change, caused by its fundamental premise. The enetc driver needs to run code for all PCI functions, regardless of whether they're enabled or not in the device tree. That is no longer possible if the driver's probe function is no longer called. But Rob recommends that we move the of_device_is_available() detection to dev->match_driver, and this makes the PCI fixups still run on all functions, while just probing drivers for those functions that are enabled. So, a separate change in the enetc driver will have to move the workarounds to a PCI fixup. Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/ Suggested-by: Rob Herring Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/pci/bus.c | 4 +++- drivers/pci/of.c | 5 ----- 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 5bc81cc0a2de..46b252bbe500 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -332,6 +333,7 @@ void __weak pcibios_bus_add_device(struct pci_dev *pdev) { } */ void pci_bus_add_device(struct pci_dev *dev) { + struct device_node *dn = dev->dev.of_node; int retval; /* @@ -344,7 +346,7 @@ void pci_bus_add_device(struct pci_dev *dev) pci_proc_attach_device(dev); pci_bridge_d3_update(dev); - dev->match_driver = true; + dev->match_driver = !dn || of_device_is_available(dn); retval = device_attach(&dev->dev); if (retval < 0 && retval != -EPROBE_DEFER) pci_warn(dev, "device attach failed (%d)\n", retval); diff --git a/drivers/pci/of.c b/drivers/pci/of.c index e51219f9f523..3c158b17dcb5 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -34,11 +34,6 @@ int pci_set_of_node(struct pci_dev *dev) if (!node) return 0; - if (!of_device_is_available(node)) { - of_node_put(node); - return -ENODEV; - } - device_set_node(&dev->dev, of_fwnode_handle(node)); return 0; } -- cgit v1.2.3