From 54fe30888901dd14a901bd3ad1a6f5d3c4ccd4a9 Mon Sep 17 00:00:00 2001
From: Felipe Balbi
Date: Fri, 9 Jun 2017 13:20:42 +0300
Subject: phy: tusb1210: implement ->set_mode()

->set_mode() can be used to tell PHY to prepare itself to enter USB
Host/Peripheral mode and that's very important for DRD
configurations.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/ti/phy-tusb1210.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'drivers/phy/ti')

diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index 5dbb9a7b4945..b8ec39ac4dfc 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -11,6 +11,7 @@
  */
 #include <linux/module.h>
 #include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
 #include <linux/gpio/consumer.h>
 #include <linux/phy/ulpi_phy.h>
 
@@ -52,9 +53,43 @@ static int tusb1210_power_off(struct phy *phy)
 	return 0;
 }
 
+static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct tusb1210 *tusb = phy_get_drvdata(phy);
+	int ret;
+
+	ret = ulpi_read(tusb->ulpi, ULPI_OTG_CTRL);
+	if (ret < 0)
+		return ret;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+		ret |= (ULPI_OTG_CTRL_DRVVBUS_EXT
+			| ULPI_OTG_CTRL_ID_PULLUP
+			| ULPI_OTG_CTRL_DP_PULLDOWN
+			| ULPI_OTG_CTRL_DM_PULLDOWN);
+		ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+		ret |= ULPI_OTG_CTRL_DRVVBUS;
+		break;
+	case PHY_MODE_USB_DEVICE:
+		ret &= ~(ULPI_OTG_CTRL_DRVVBUS
+			 | ULPI_OTG_CTRL_DP_PULLDOWN
+			 | ULPI_OTG_CTRL_DM_PULLDOWN);
+		ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+		ret &= ~ULPI_OTG_CTRL_DRVVBUS_EXT;
+		break;
+	default:
+		/* nothing */
+		return 0;
+	}
+
+	return ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+}
+
 static const struct phy_ops phy_ops = {
 	.power_on = tusb1210_power_on,
 	.power_off = tusb1210_power_off,
+	.set_mode = tusb1210_set_mode,
 	.owner = THIS_MODULE,
 };
 
-- 
cgit v1.2.3