From 2796ceb0c18a5a0ee96f36d4c3b3773df74c560e Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 9 Oct 2017 14:33:38 +0530 Subject: phy: ti-pipe3: Update pcie phy settings Update the PCIe phy settings based on new settings available in AM572x Technical Reference Manual[1] Revision I, revised April 2017 in Table 26-62 "Preferred PCIe_PHY_RX SCP Register Settings". [1] http://www.ti.com/lit/ug/spruhz6i/spruhz6i.pdf Cc: Vignesh R Signed-off-by: Kishon Vijay Abraham I [nsekhar@ti.com: commit message updates] Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/ti/phy-ti-pipe3.c | 101 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 100 insertions(+), 1 deletion(-) (limited to 'drivers/phy') diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c index 0e564f32749f..68ce4a082b9b 100644 --- a/drivers/phy/ti/phy-ti-pipe3.c +++ b/drivers/phy/ti/phy-ti-pipe3.c @@ -68,6 +68,40 @@ #define PCIE_PCS_MASK 0xFF0000 #define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 +#define PCIEPHYRX_ANA_PROGRAMMABILITY 0x0000000C +#define INTERFACE_MASK GENMASK(31, 27) +#define INTERFACE_SHIFT 27 +#define LOSD_MASK GENMASK(17, 14) +#define LOSD_SHIFT 14 +#define MEM_PLLDIV GENMASK(6, 5) + +#define PCIEPHYRX_TRIM 0x0000001C +#define MEM_DLL_TRIM_SEL GENMASK(31, 30) +#define MEM_DLL_TRIM_SHIFT 30 + +#define PCIEPHYRX_DLL 0x00000024 +#define MEM_DLL_PHINT_RATE GENMASK(31, 30) + +#define PCIEPHYRX_DIGITAL_MODES 0x00000028 +#define MEM_CDR_FASTLOCK BIT(23) +#define MEM_CDR_LBW GENMASK(22, 21) +#define MEM_CDR_STEPCNT GENMASK(20, 19) +#define MEM_CDR_STL_MASK GENMASK(18, 16) +#define MEM_CDR_STL_SHIFT 16 +#define MEM_CDR_THR_MASK GENMASK(15, 13) +#define MEM_CDR_THR_SHIFT 13 +#define MEM_CDR_THR_MODE BIT(12) +#define MEM_CDR_CDR_2NDO_SDM_MODE BIT(11) +#define MEM_OVRD_HS_RATE BIT(26) + +#define PCIEPHYRX_EQUALIZER 0x00000038 +#define MEM_EQLEV GENMASK(31, 16) +#define MEM_EQFTC GENMASK(15, 11) +#define MEM_EQCTL GENMASK(10, 7) +#define MEM_EQCTL_SHIFT 7 +#define MEM_OVRD_EQLEV BIT(2) +#define MEM_OVRD_EQFTC BIT(1) + /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status @@ -91,6 +125,8 @@ struct pipe3_dpll_map { struct ti_pipe3 { void __iomem *pll_ctrl_base; + void __iomem *phy_rx; + void __iomem *phy_tx; struct device *dev; struct device *control_dev; struct clk *wkupclk; @@ -261,6 +297,37 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) return ti_pipe3_dpll_wait_lock(phy); } +static void ti_pipe3_calibrate(struct ti_pipe3 *phy) +{ + u32 val; + + val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY); + val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV); + val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT); + ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val); + + val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES); + val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK | + MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE); + val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT | + 0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE); + ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val); + + val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM); + val &= ~MEM_DLL_TRIM_SEL; + val |= 0x2 << MEM_DLL_TRIM_SHIFT; + ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val); + + val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL); + val |= MEM_DLL_PHINT_RATE; + ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val); + + val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER); + val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC); + val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT; + ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val); +} + static int ti_pipe3_init(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); @@ -282,7 +349,12 @@ static int ti_pipe3_init(struct phy *x) val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT; ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg, PCIE_PCS_MASK, val); - return ret; + if (ret) + return ret; + + ti_pipe3_calibrate(phy); + + return 0; } /* Bring it out of IDLE if it is IDLE */ @@ -513,6 +585,29 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) return 0; } +static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) +{ + struct resource *res; + struct device *dev = phy->dev; + struct device_node *node = dev->of_node; + struct platform_device *pdev = to_platform_device(dev); + + if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) + return 0; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy_rx"); + phy->phy_rx = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->phy_rx)) + return PTR_ERR(phy->phy_rx); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy_tx"); + phy->phy_tx = devm_ioremap_resource(dev, res); + + return PTR_ERR_OR_ZERO(phy->phy_tx); +} + static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy) { struct resource *res; @@ -559,6 +654,10 @@ static int ti_pipe3_probe(struct platform_device *pdev) if (ret) return ret; + ret = ti_pipe3_get_tx_rx_base(phy); + if (ret) + return ret; + ret = ti_pipe3_get_sysctrl(phy); if (ret) return ret; -- cgit v1.2.3