From fa8785e5931367e2b43f2c507f26bcf3e281c0ca Mon Sep 17 00:00:00 2001 From: IotaHydrae Date: Wed, 4 May 2022 19:59:04 +0800 Subject: pinctrl: sunxi: fix f1c100s uart2 function Change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2 When the pin PD13 and PD14 is setting up to uart2 function in dts, there's an error occurred: 1c20800.pinctrl: unsupported function uart2 on pin PD14 Because 'uart2' is not any one multiplexing option of PD14, and pinctrl don't know how to configure it. So change the pin PD14 lvds1 function to uart2. Signed-off-by: IotaHydrae Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/tencent_70C1308DDA794C81CAEF389049055BACEC09@qq.com Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pinctrl') diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c index 2801ca706273..68a5b627fb9b 100644 --- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c +++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c @@ -204,7 +204,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "lcd"), /* D20 */ - SUNXI_FUNCTION(0x3, "lvds1"), /* RX */ + SUNXI_FUNCTION(0x3, "uart2"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15), SUNXI_FUNCTION(0x0, "gpio_in"), -- cgit v1.2.3