From 8e0cb05b3b758885aab09883adf189f8dd8402b2 Mon Sep 17 00:00:00 2001 From: Philip, Avinash Date: Wed, 25 Jul 2012 16:58:18 +0530 Subject: pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia Signed-off-by: Philip, Avinash Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tiecap.c | 232 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 drivers/pwm/pwm-tiecap.c (limited to 'drivers/pwm/pwm-tiecap.c') diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c new file mode 100644 index 000000000000..3c2ad284ee3e --- /dev/null +++ b/drivers/pwm/pwm-tiecap.c @@ -0,0 +1,232 @@ +/* + * ECAP PWM driver + * + * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* ECAP registers and bits definitions */ +#define CAP1 0x08 +#define CAP2 0x0C +#define CAP3 0x10 +#define CAP4 0x14 +#define ECCTL2 0x2A +#define ECCTL2_APWM_MODE BIT(9) +#define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) +#define ECCTL2_TSCTR_FREERUN BIT(4) + +struct ecap_pwm_chip { + struct pwm_chip chip; + unsigned int clk_rate; + void __iomem *mmio_base; +}; + +static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ecap_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * period_cycles / PWM_CLK_RATE + * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE + */ +static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles; + unsigned int reg_val; + + if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) + return -ERANGE; + + c = pc->clk_rate; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + period_cycles = (unsigned long)c; + + if (period_cycles < 1) { + period_cycles = 1; + duty_cycles = 1; + } else { + c = pc->clk_rate; + c = c * duty_ns; + do_div(c, NSEC_PER_SEC); + duty_cycles = (unsigned long)c; + } + + pm_runtime_get_sync(pc->chip.dev); + + reg_val = readw(pc->mmio_base + ECCTL2); + + /* Configure APWM mode & disable sync option */ + reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA; + + writew(reg_val, pc->mmio_base + ECCTL2); + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + /* Update active registers if not running */ + writel(duty_cycles, pc->mmio_base + CAP2); + writel(period_cycles, pc->mmio_base + CAP1); + } else { + /* + * Update shadow registers to configure period and + * compare values. This helps current PWM period to + * complete on reconfiguring + */ + writel(duty_cycles, pc->mmio_base + CAP4); + writel(period_cycles, pc->mmio_base + CAP3); + } + + pm_runtime_put_sync(pc->chip.dev); + return 0; +} + +static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* Leave clock enabled on enabling PWM */ + pm_runtime_get_sync(pc->chip.dev); + + /* + * Enable 'Free run Time stamp counter mode' to start counter + * and 'APWM mode' to enable APWM output + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + return 0; +} + +static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* + * Disable 'Free run Time stamp counter mode' to stop counter + * and 'APWM mode' to put APWM output to low + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE); + writew(reg_val, pc->mmio_base + ECCTL2); + + /* Disable clock on PWM disable */ + pm_runtime_put_sync(pc->chip.dev); +} + +static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + dev_warn(chip->dev, "Removing PWM device without disabling\n"); + pm_runtime_put_sync(chip->dev); + } +} + +static const struct pwm_ops ecap_pwm_ops = { + .free = ecap_pwm_free, + .config = ecap_pwm_config, + .enable = ecap_pwm_enable, + .disable = ecap_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit ecap_pwm_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct clk *clk; + struct ecap_pwm_chip *pc; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + pc->clk_rate = clk_get_rate(clk); + if (!pc->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &ecap_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = 1; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); + if (!pc->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + return -EADDRNOTAVAIL; + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + platform_set_drvdata(pdev, pc); + return 0; +} + +static int __devexit ecap_pwm_remove(struct platform_device *pdev) +{ + struct ecap_pwm_chip *pc = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return pwmchip_remove(&pc->chip); +} + +static struct platform_driver ecap_pwm_driver = { + .driver = { + .name = "ecap", + }, + .probe = ecap_pwm_probe, + .remove = __devexit_p(ecap_pwm_remove), +}; + +module_platform_driver(ecap_pwm_driver); + +MODULE_DESCRIPTION("ECAP PWM driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3