From 667a6b7a620ec6e0c1e6689b8c6531c51ce6cdfa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 5 Feb 2014 17:56:27 +0100 Subject: regulator: max14577: Add missing of_node_put Decrease the reference count for 'regulators' device_node, obtained by of_get_child_by_name(). Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- drivers/regulator/max14577.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c index b1078ba3f393..186df8785a91 100644 --- a/drivers/regulator/max14577.c +++ b/drivers/regulator/max14577.c @@ -168,10 +168,11 @@ static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev) MAX14577_REG_MAX); if (ret < 0) { dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); - return ret; } - return 0; + of_node_put(np); + + return ret; } static inline struct regulator_init_data *match_init_data(int index) -- cgit v1.2.3 From f17083c3affccfe955b0a419056784096c18fea8 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Thu, 6 Feb 2014 18:03:21 +0000 Subject: regulator: da9055: Remove use of regmap_irq_get_virq() Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- drivers/regulator/da9055-regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index 7f340206d329..b14ebdad5dd2 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -576,7 +576,9 @@ static int da9055_regulator_probe(struct platform_device *pdev) /* Only LDO 5 and 6 has got the over current interrupt */ if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) { irq = platform_get_irq_byname(pdev, "REGULATOR"); - irq = regmap_irq_get_virq(da9055->irq_data, irq); + if (irq < 0) + return irq; + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, da9055_ldo5_6_oc_irq, IRQF_TRIGGER_HIGH | -- cgit v1.2.3 From ebf6dad0de89677aa58a4d8b009014ff88a23452 Mon Sep 17 00:00:00 2001 From: Steve Twiss Date: Wed, 12 Feb 2014 09:57:52 +0000 Subject: regulator: da9063: Bug fix when setting max voltage on LDOs 5-11 Bug fix to allow the setting of maximum voltage for certain LDOs. What the bug is: There is a problem caused by an invalid calculation of n_voltages in the driver. This n_voltages value has the potential to be different for each regulator. The value for linear_min_sel is set as DA9063_V##regl_name# which can be different depending upon the regulator. This is chosen according to the following definitions in the DA9063 registers.h file: DA9063_VLDO1_BIAS 0 DA9063_VLDO2_BIAS 0 DA9063_VLDO3_BIAS 0 DA9063_VLDO4_BIAS 0 DA9063_VLDO5_BIAS 2 DA9063_VLDO6_BIAS 2 DA9063_VLDO7_BIAS 2 DA9063_VLDO8_BIAS 2 DA9063_VLDO9_BIAS 3 DA9063_VLDO10_BIAS 2 DA9063_VLDO11_BIAS 2 The calculation for n_voltages is valid for LDOs whose BIAS value is zero but this is not correct for those LDOs which have a non-zero value. What the fix is: In order to take into account the non-zero linear_min_sel value which is set for the regulators LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 and LDO11, the calculation for n_voltages should take into account the missing term defined by DA9063_V##regl_name#. This will in turn allow the core constraints calculation to set the maximum voltage limits correctly and therefore allow users to apply the maximum expected voltage to all of the LDOs. Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/da9063-regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 56727eb745df..91e99a2c8dc1 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -1,3 +1,4 @@ + /* * Regulator driver for DA9063 PMIC series * @@ -60,7 +61,8 @@ struct da9063_regulator_info { .desc.ops = &da9063_ldo_ops, \ .desc.min_uV = (min_mV) * 1000, \ .desc.uV_step = (step_mV) * 1000, \ - .desc.n_voltages = (((max_mV) - (min_mV))/(step_mV) + 1), \ + .desc.n_voltages = (((max_mV) - (min_mV))/(step_mV) + 1 \ + + (DA9063_V##regl_name##_BIAS)), \ .desc.enable_reg = DA9063_REG_##regl_name##_CONT, \ .desc.enable_mask = DA9063_LDO_EN, \ .desc.vsel_reg = DA9063_REG_V##regl_name##_A, \ -- cgit v1.2.3 From 4e52c03dfcdef5ad1415e18af0e7230d98ff3a7c Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 13 Feb 2014 17:05:06 +0530 Subject: regulator: s5m8767: Use of_get_child_by_name of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/s5m8767.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index d7164bb75d3e..092d44e5db4e 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -535,7 +535,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, return -ENODEV; } - regulators_np = of_find_node_by_name(pmic_np, "regulators"); + regulators_np = of_get_child_by_name(pmic_np, "regulators"); if (!regulators_np) { dev_err(iodev->dev, "could not find regulators sub-node\n"); return -EINVAL; -- cgit v1.2.3 From b7db01f3b3b86f6b02a98756a051d176610ca0f1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 13 Feb 2014 17:05:07 +0530 Subject: regulator: s5m8767: Add missing of_node_put Add of_node_put to decrement the ref count. Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/s5m8767.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 092d44e5db4e..d958dfa05125 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -591,6 +591,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, rmode++; } + of_node_put(regulators_np); + if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) { pdata->buck2_gpiodvs = true; -- cgit v1.2.3 From acc3d5cec84f82ebea535fa0bd9500ac3df2aee9 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 20 Feb 2014 12:58:15 -0700 Subject: regulator: core: Change dummy supplies error message to a warning Change "dummy supplies not allowed" error message to warning instead, as this is a just warning message with no change to the behavior. [Added a CC to stable since some other bug fixes cause this to come up more frequently on PCs which is how it was noticed -- broonie] Signed-off-by: Shuah Khan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b38a6b669e8c..74e9fb2e52e7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1352,7 +1352,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, goto found; /* Don't log an error when called from regulator_get_optional() */ } else if (!have_full_constraints() || exclusive) { - dev_err(dev, "dummy supplies not allowed\n"); + dev_warn(dev, "dummy supplies not allowed\n"); } mutex_unlock(®ulator_list_mutex); -- cgit v1.2.3 From 08221fc4e7aa585a59de90c0354da3e8d3e88d94 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 21 Feb 2014 13:12:38 +0100 Subject: regulator: max14577: Fix invalid return value on DT parse success This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing of_node_put). The DTS parsing function returned number of matched regulators as success status which then was compared against 0 in probe. Result was a probe fail after successful parsing the DTS: max14577-regulator: probe of max14577-regulator failed with error 2 Signed-off-by: Krzysztof Kozlowski Reviwed-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/max14577.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c index 186df8785a91..e0619526708c 100644 --- a/drivers/regulator/max14577.c +++ b/drivers/regulator/max14577.c @@ -166,9 +166,10 @@ static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev) ret = of_regulator_match(&pdev->dev, np, max14577_regulator_matches, MAX14577_REG_MAX); - if (ret < 0) { + if (ret < 0) dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); - } + else + ret = 0; of_node_put(np); -- cgit v1.2.3 From f18792714608a670c2762d22f695d77d02fc965e Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 14 Mar 2014 17:21:58 +0530 Subject: regulator: Add support for S2MPA01 regulator Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat Acked-by: Mark Brown Signed-off-by: Lee Jones --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/s2mpa01.c | 481 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 489 insertions(+) create mode 100644 drivers/regulator/s2mpa01.c (limited to 'drivers/regulator') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6a7932822e37..8f8e6710bb45 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -416,6 +416,13 @@ config REGULATOR_RC5T583 through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + config REGULATOR_S2MPS11 tristate "Samsung S2MPS11 voltage regulator" depends on MFD_SEC_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 979f9ddcf259..b3ece84289cf 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o +obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c new file mode 100644 index 000000000000..808b3aa7a42c --- /dev/null +++ b/drivers/regulator/s2mpa01.c @@ -0,0 +1,481 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators) + +struct s2mpa01_info { + int ramp_delay24; + int ramp_delay3; + int ramp_delay5; + int ramp_delay16; + int ramp_delay7; + int ramp_delay8910; +}; + +static int get_ramp_delay(int ramp_delay) +{ + unsigned char cnt = 0; + + ramp_delay /= 6250; + + while (true) { + ramp_delay = ramp_delay >> 1; + if (ramp_delay == 0) + break; + cnt++; + } + + if (cnt > 3) + cnt = 3; + + return cnt; +} + +static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_delay = 0; + int old_volt, new_volt; + + switch (rdev->desc->id) { + case S2MPA01_BUCK2: + case S2MPA01_BUCK4: + ramp_delay = s2mpa01->ramp_delay24; + break; + case S2MPA01_BUCK3: + ramp_delay = s2mpa01->ramp_delay3; + break; + case S2MPA01_BUCK5: + ramp_delay = s2mpa01->ramp_delay5; + break; + case S2MPA01_BUCK1: + case S2MPA01_BUCK6: + ramp_delay = s2mpa01->ramp_delay16; + break; + case S2MPA01_BUCK7: + ramp_delay = s2mpa01->ramp_delay7; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + ramp_delay = s2mpa01->ramp_delay8910; + break; + } + + if (ramp_delay == 0) + ramp_delay = rdev->desc->ramp_delay; + + old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector); + new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector); + + return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); +} + +static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2; + unsigned int ramp_enable = 1, enable_shift = 0; + int ret; + + switch (rdev->desc->id) { + case S2MPA01_BUCK1: + enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK2: + enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK3: + enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + s2mpa01->ramp_delay3 = ramp_delay; + ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK4: + enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK5: + s2mpa01->ramp_delay5 = ramp_delay; + ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT; + break; + case S2MPA01_BUCK6: + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + break; + case S2MPA01_BUCK7: + s2mpa01->ramp_delay7 = ramp_delay; + ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + if (ramp_delay > s2mpa01->ramp_delay8910) + s2mpa01->ramp_delay8910 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay8910; + + ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT; + break; + default: + return 0; + } + + if (!ramp_enable) + goto ramp_disable; + + if (enable_shift) { + ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } + } + + ramp_val = get_ramp_delay(ramp_delay); + + return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift, + ramp_val << ramp_shift); + +ramp_disable: + return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 0); +} + +static struct regulator_ops s2mpa01_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops s2mpa01_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel, + .set_ramp_delay = s2mpa01_set_ramp_delay, +}; + +#define regulator_desc_ldo1(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP1, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} +#define regulator_desc_ldo2(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP2, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck1_4(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck5 { \ + .name = "BUCK5", \ + .id = S2MPA01_BUCK5, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B5CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B5CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck6_7(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck8 { \ + .name = "BUCK8", \ + .id = S2MPA01_BUCK8, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B8CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B8CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck9 { \ + .name = "BUCK9", \ + .id = S2MPA01_BUCK9, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN4, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B9CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B9CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck10 { \ + .name = "BUCK10", \ + .id = S2MPA01_BUCK10, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN3, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B10CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B10CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo2(1), + regulator_desc_ldo1(2), + regulator_desc_ldo1(3), + regulator_desc_ldo1(4), + regulator_desc_ldo1(5), + regulator_desc_ldo2(6), + regulator_desc_ldo1(7), + regulator_desc_ldo1(8), + regulator_desc_ldo1(9), + regulator_desc_ldo1(10), + regulator_desc_ldo2(11), + regulator_desc_ldo1(12), + regulator_desc_ldo1(13), + regulator_desc_ldo1(14), + regulator_desc_ldo1(15), + regulator_desc_ldo1(16), + regulator_desc_ldo1(17), + regulator_desc_ldo1(18), + regulator_desc_ldo1(19), + regulator_desc_ldo1(20), + regulator_desc_ldo1(21), + regulator_desc_ldo2(22), + regulator_desc_ldo2(23), + regulator_desc_ldo1(24), + regulator_desc_ldo1(25), + regulator_desc_ldo1(26), + regulator_desc_buck1_4(1), + regulator_desc_buck1_4(2), + regulator_desc_buck1_4(3), + regulator_desc_buck1_4(4), + regulator_desc_buck5, + regulator_desc_buck6_7(6), + regulator_desc_buck6_7(7), + regulator_desc_buck8, + regulator_desc_buck9, + regulator_desc_buck10, +}; + +static int s2mpa01_pmic_probe(struct platform_device *pdev) +{ + struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); + struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX]; + struct device_node *reg_np = NULL; + struct regulator_config config = { }; + struct s2mpa01_info *s2mpa01; + int i; + + s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL); + if (!s2mpa01) + return -ENOMEM; + + for (i = 0; i < S2MPA01_REGULATOR_CNT; i++) + rdata[i].name = regulators[i].name; + + if (iodev->dev->of_node) { + reg_np = of_get_child_by_name(iodev->dev->of_node, + "regulators"); + if (!reg_np) { + dev_err(&pdev->dev, + "could not find regulators sub-node\n"); + return -EINVAL; + } + + of_regulator_match(&pdev->dev, reg_np, rdata, + S2MPA01_REGULATOR_MAX); + of_node_put(reg_np); + } + + platform_set_drvdata(pdev, s2mpa01); + + config.dev = &pdev->dev; + config.regmap = iodev->regmap_pmic; + config.driver_data = s2mpa01; + + for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) { + struct regulator_dev *rdev; + if (pdata) + config.init_data = pdata->regulators[i].initdata; + else + config.init_data = rdata[i].init_data; + + if (reg_np) + config.of_node = rdata[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "regulator init failed for %d\n", + i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id s2mpa01_pmic_id[] = { + { "s2mpa01-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id); + +static struct platform_driver s2mpa01_pmic_driver = { + .driver = { + .name = "s2mpa01-pmic", + .owner = THIS_MODULE, + }, + .probe = s2mpa01_pmic_probe, + .id_table = s2mpa01_pmic_id, +}; + +module_platform_driver(s2mpa01_pmic_driver); + +/* Module information */ +MODULE_AUTHOR("Sangbeom Kim "); +MODULE_AUTHOR("Sachin Kamat "); +MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3