From a90037560588e51b3e98b49537799137cbfda17d Mon Sep 17 00:00:00 2001 From: Dave Maurer Date: Fri, 22 Jun 2012 06:45:33 +0000 Subject: isci: fix COMSAS negation timout workaround for WD SAS drives The following patch is a fix for the WD workaround COMSAS negation timeout change. This patch disables the OOB SM when the OOB is placed in reset, which allows the updated COMSAS negation timeout value to take effect. Cc: Dan Thompson Reported-by: Dan Thompson Signed-off-by: Dave Maurer Signed-off-by: Dan Williams --- drivers/scsi/isci/phy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi/isci') diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 18f43d4c30ba..ebb8f530f708 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -1205,6 +1205,7 @@ static void scu_link_layer_start_oob(struct isci_phy *iphy) /** Reset OOB sequence - start */ val = readl(&ll->phy_configuration); val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); writel(val, &ll->phy_configuration); readl(&ll->phy_configuration); /* flush */ @@ -1236,6 +1237,7 @@ static void scu_link_layer_tx_hard_reset( * to the starting state. */ phy_configuration_value = readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); -- cgit v1.2.3