From 716d3bc5030bf916b4eea15c7c00c95329f2cda4 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 6 Sep 2013 12:18:28 -0400 Subject: [SCSI] lpfc 8.3.42: Fixed not able to log informational messages at early stage of driver init time Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers/scsi/lpfc') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 501147c4a147..b94420b3817a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4859,6 +4859,9 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) struct lpfc_mqe *mqe; int longs; + /* Get all the module params for configuring this host */ + lpfc_get_cfgparam(phba); + /* Before proceed, wait for POST done and device ready */ rc = lpfc_sli4_post_status_check(phba); if (rc) @@ -4902,15 +4905,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) sizeof(struct lpfc_mbox_ext_buf_ctx)); INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); - /* - * We need to do a READ_CONFIG mailbox command here before - * calling lpfc_get_cfgparam. For VFs this will report the - * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings. - * All of the resources allocated - * for this Port are tied to these values. - */ - /* Get all the module params for configuring this host */ - lpfc_get_cfgparam(phba); phba->max_vpi = LPFC_MAX_VPI; /* This will be set to correct value after the read_config mbox */ -- cgit v1.2.3