From 7d568652d3abc81a6d684d4760571a3ccb6f68d9 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Sat, 31 Aug 2013 21:40:20 +0530 Subject: [SCSI] ufs: fix the setting interrupt aggregation counter IACTH(Interrupt aggregation counter threshold) value is allowed up to 0x1F and current setting value is the maximum. This value is related with NUTRS(max:0x20) of HCI's capability. Considering HCI controller doesn't support the maximum, IACTH setting should be adjusted with possible value. For that, existing 'ufshcd_config_int_aggr' is split into two part [reset, configure]. Signed-off-by: Seungwon Jeon Reviewed-by: Subhash Jadavani Tested-by: Yaniv Gardi Signed-off-by: Santosh Y Signed-off-by: James Bottomley --- drivers/scsi/ufs/ufshcd.c | 53 ++++++++++++++++++++++------------------------- drivers/scsi/ufs/ufshci.h | 4 ++-- 2 files changed, 27 insertions(+), 30 deletions(-) (limited to 'drivers/scsi/ufs') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 6c34f6ae8870..46b0754b4b76 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -56,6 +56,9 @@ /* Expose the flag value from utp_upiu_query.value */ #define MASK_QUERY_UPIU_FLAG_LOC 0xFF +/* Interrupt aggregation default timeout, unit: 40us */ +#define INT_AGGR_DEF_TO 0x02 + enum { UFSHCD_MAX_CHANNEL = 0, UFSHCD_MAX_ID = 1, @@ -78,12 +81,6 @@ enum { UFSHCD_INT_CLEAR, }; -/* Interrupt aggregation options */ -enum { - INT_AGGR_RESET, - INT_AGGR_CONFIG, -}; - /* * ufshcd_wait_for_register - wait for register value to change * @hba - per-adapter interface @@ -290,30 +287,30 @@ static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr) } /** - * ufshcd_config_int_aggr - Configure interrupt aggregation values. - * Currently there is no use case where we want to configure - * interrupt aggregation dynamically. So to configure interrupt - * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and - * INT_AGGR_TIMEOUT_VALUE are used. + * ufshcd_reset_intr_aggr - Reset interrupt aggregation values. * @hba: per adapter instance - * @option: Interrupt aggregation option */ static inline void -ufshcd_config_int_aggr(struct ufs_hba *hba, int option) +ufshcd_reset_intr_aggr(struct ufs_hba *hba) { - switch (option) { - case INT_AGGR_RESET: - ufshcd_writel(hba, INT_AGGR_ENABLE | - INT_AGGR_COUNTER_AND_TIMER_RESET, - REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); - break; - case INT_AGGR_CONFIG: - ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | - INT_AGGR_COUNTER_THRESHOLD_VALUE | - INT_AGGR_TIMEOUT_VALUE, - REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); - break; - } + ufshcd_writel(hba, INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_config_intr_aggr - Configure interrupt aggregation values. + * @hba: per adapter instance + * @cnt: Interrupt aggregation counter threshold + * @tmout: Interrupt aggregation timeout value + */ +static inline void +ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THLD_VAL(cnt) | + INT_AGGR_TIMEOUT_VAL(tmout), + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); } /** @@ -1457,7 +1454,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); /* Configure interrupt aggregation */ - ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG); + ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); /* Configure UTRL and UTMRL base address registers */ ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), @@ -1967,7 +1964,7 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba) /* Reset interrupt aggregation counters */ if (int_aggr_reset) - ufshcd_config_int_aggr(hba, INT_AGGR_RESET); + ufshcd_reset_intr_aggr(hba); } /** diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index f1e1b7459107..739ae3aade0e 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -226,8 +226,8 @@ enum { #define MASK_UIC_COMMAND_RESULT 0xFF -#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8) -#define INT_AGGR_TIMEOUT_VALUE (0x02) +#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8) +#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0) /* Interrupt disable masks */ enum { -- cgit v1.2.3