From 34a9b81b476ea0fa7a2e7ec642830f690eb093aa Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 30 Oct 2013 16:13:22 +0530 Subject: [SCSI] pm80xx: Fix for direct attached device. In case of direct attached SATA device delay is not enough. It will give crash for set device state command response and wait_for_completion is the best solution for this. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index f4eb18e51631..f50ac44b950e 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -1098,15 +1098,17 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun) struct pm8001_tmf_task tmf_task; struct pm8001_device *pm8001_dev = dev->lldd_dev; struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + DECLARE_COMPLETION_ONSTACK(completion_setstate); if (dev_is_sata(dev)) { struct sas_phy *phy = sas_get_local_phy(dev); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , dev, 1, 0); rc = sas_phy_reset(phy, 1); sas_put_local_phy(phy); + pm8001_dev->setds_completion = &completion_setstate; rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, pm8001_dev, 0x01); - msleep(2000); + wait_for_completion(&completion_setstate); } else { tmf_task.tmf = TMF_LU_RESET; rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); -- cgit v1.2.3