From 7da79312830e6d9b3f6ee06b86c3a35caba2f6e7 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Thu, 1 Sep 2005 21:53:34 -0400 Subject: [PATCH] libata: fix pio_mask values (take 2) ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO modes 3 and 4. The value read from the drive, which reports support for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd with 0x7 (which then corresponds to PIO 2-0 in libata). Thus, the drivers below need adjustments to comply with the way pio_mask is used. I changed the masks from the commented values to all support PIO4-0, since the spec mandates that PIO0-2 are supported and there's no reason not to support PIO3 IMO. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- drivers/scsi/sata_uli.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 31065261de8e..320df6cd3def 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -250,7 +250,7 @@ static struct ata_port_info ahci_port_info[] = { .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, - .pio_mask = 0x03, /* pio3-4 */ + .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, }, diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 1566886815fb..42e13ed8eb5b 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -125,8 +125,8 @@ static struct ata_port_info uli_port_info = { .sht = &uli_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x03, //support pio mode 4 (FIXME) - .udma_mask = 0x7f, //support udma mode 6 + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &uli_ops, }; -- cgit v1.2.3