From ae5fbae0ccd982dfca0ce363036ed92f5b13f150 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 22 Oct 2013 18:35:19 -0700 Subject: [SCSI] libsas: fix usage of ata_tf_to_fis Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by: Dan Williams Reported-by: Praveen Murali Tested-by: Praveen Murali Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 161c98efade9..d2895836f9fa 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) qc->tf.nsect = 0; } - ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); task->uldd_task = qc; if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); -- cgit v1.2.3 From 5e53e689b737526308db2b5c9f56e9d0371a1676 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 Nov 2013 21:09:26 +0100 Subject: genetlink/pmcraid: use proper genetlink multicast API The pmcraid driver is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make it use the correct API, but since this may already be used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. My previous patch broke event delivery in the driver as I missed that it wasn't using the right API and forgot to update it later in my series. While changing this, I noticed that the genetlink code could use the static group ID instead of a strcmp(), so also do that for the VFS_DQUOT family. Cc: Anil Ravindranath Cc: "James E.J. Bottomley" Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/scsi/pmcraid.c | 20 +++++++++++++++----- include/uapi/linux/genetlink.h | 1 + net/netlink/genetlink.c | 11 +++++++++-- 3 files changed, 25 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..892ea6161376 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1404,11 +1404,22 @@ enum { }; #define PMCRAID_AEN_CMD_MAX (__PMCRAID_AEN_CMD_MAX - 1) +static struct genl_multicast_group pmcraid_mcgrps[] = { + { .name = "events", /* not really used - see ID discussion below */ }, +}; + static struct genl_family pmcraid_event_family = { - .id = GENL_ID_GENERATE, + /* + * Due to prior multicast group abuse (the code having assumed that + * the family ID can be used as a multicast group ID) we need to + * statically allocate a family (and thus group) ID. + */ + .id = GENL_ID_PMCRAID, .name = "pmcraid", .version = 1, - .maxattr = PMCRAID_AEN_ATTR_MAX + .maxattr = PMCRAID_AEN_ATTR_MAX, + .mcgrps = pmcraid_mcgrps, + .n_mcgrps = ARRAY_SIZE(pmcraid_mcgrps), }; /** @@ -1511,9 +1522,8 @@ static int pmcraid_notify_aen( return result; } - result = - genlmsg_multicast(&pmcraid_event_family, skb, 0, - pmcraid_event_family.id, GFP_ATOMIC); + result = genlmsg_multicast(&pmcraid_event_family, skb, + 0, 0, GFP_ATOMIC); /* If there are no listeners, genlmsg_multicast may return non-zero * value. diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index 1af72d8228e0..c3363ba1ae05 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -28,6 +28,7 @@ struct genlmsghdr { #define GENL_ID_GENERATE 0 #define GENL_ID_CTRL NLMSG_MIN_TYPE #define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) /************************************************************************** * Controller diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 803206e82450..713671ae45af 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -74,9 +74,12 @@ static struct list_head family_ht[GENL_FAM_TAB_SIZE]; * Bit 17 is marked as already used since the VFS quota code * also abused this API and relied on family == group ID, we * cater to that by giving it a static family and group ID. + * Bit 18 is marked as already used since the PMCRAID driver + * did the same thing as the VFS quota code (maybe copied?) */ static unsigned long mc_group_start = 0x3 | BIT(GENL_ID_CTRL) | - BIT(GENL_ID_VFS_DQUOT); + BIT(GENL_ID_VFS_DQUOT) | + BIT(GENL_ID_PMCRAID); static unsigned long *mc_groups = &mc_group_start; static unsigned long mc_groups_longs = 1; @@ -139,6 +142,7 @@ static u16 genl_generate_id(void) for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) { if (id_gen_idx != GENL_ID_VFS_DQUOT && + id_gen_idx != GENL_ID_PMCRAID && !genl_family_find_byid(id_gen_idx)) return id_gen_idx; if (++id_gen_idx > GENL_MAX_ID) @@ -236,9 +240,12 @@ static int genl_validate_assign_mc_groups(struct genl_family *family) } else if (strcmp(family->name, "NET_DM") == 0) { first_id = 1; BUG_ON(n_groups != 1); - } else if (strcmp(family->name, "VFS_DQUOT") == 0) { + } else if (family->id == GENL_ID_VFS_DQUOT) { first_id = GENL_ID_VFS_DQUOT; BUG_ON(n_groups != 1); + } else if (family->id == GENL_ID_PMCRAID) { + first_id = GENL_ID_PMCRAID; + BUG_ON(n_groups != 1); } else { groups_allocated = true; err = genl_allocate_reserve_groups(n_groups, &first_id); -- cgit v1.2.3 From 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Wed, 23 Oct 2013 06:25:40 -0400 Subject: [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/3w-9xxx.c | 3 ++- drivers/scsi/3w-sas.c | 3 ++- drivers/scsi/3w-xxxx.c | 3 ++- drivers/scsi/aacraid/linit.c | 1 + drivers/scsi/arcmsr/arcmsr_hba.c | 1 + drivers/scsi/gdth.c | 1 + drivers/scsi/hosts.c | 1 + drivers/scsi/hpsa.c | 1 + drivers/scsi/ipr.c | 3 ++- drivers/scsi/ips.c | 1 + drivers/scsi/megaraid.c | 1 + drivers/scsi/megaraid/megaraid_mbox.c | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 1 + drivers/scsi/pmcraid.c | 1 + drivers/scsi/sd.c | 6 ++++++ drivers/scsi/storvsc_drv.c | 1 + include/scsi/scsi_host.h | 6 ++++++ 19 files changed, 33 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index db6dfcfa3e2e..ab58556d347c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; + shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 281029daf98c..b0bb056458a3 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1623,6 +1623,7 @@ static struct scsi_host_template scsi_driver_template = { .cmd_per_lun = 1, .can_queue = 1, .sdev_attrs = sbp2_scsi_sysfs_attrs, + .no_write_same = 1, }; MODULE_AUTHOR("Kristian Hoegsberg "); diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5e1e12c0cf42..0a7325361d29 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twa_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index c845bdbeb6c0..4de346017e9f 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twl_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index b9276d10b25c..752624e6bc00 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -2279,7 +2279,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = tw_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index f0d432c139d0..4921ed19a027 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1081,6 +1081,7 @@ static struct scsi_host_template aac_driver_template = { #endif .use_clustering = ENABLE_CLUSTERING, .emulated = 1, + .no_write_same = 1, }; static void __aac_shutdown(struct aac_dev * aac) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 97fd450aff09..4f6a30b8e5f9 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = { .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = arcmsr_host_attrs, + .no_write_same = 1, }; static struct pci_device_id arcmsr_device_id_table[] = { {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)}, diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index ee4fa40a50b1..ce5ef0190bad 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4684,6 +4684,7 @@ static struct scsi_host_template gdth_template = { .cmd_per_lun = GDTH_MAXC_P_L, .unchecked_isa_dma = 1, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; #ifdef CONFIG_ISA diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f334859024c0..f2c5005f312a 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -395,6 +395,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->use_clustering = sht->use_clustering; shost->ordered_tag = sht->ordered_tag; shost->eh_deadline = shost_eh_deadline * HZ; + shost->no_write_same = sht->no_write_same; if (sht->supported_mode == MODE_UNKNOWN) /* means we didn't set it ... default to INITIATOR */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 22f6432eb475..2336beff7a48 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -561,6 +561,7 @@ static struct scsi_host_template hpsa_driver_template = { .sdev_attrs = hpsa_sdev_attrs, .shost_attrs = hpsa_shost_attrs, .max_sectors = 8192, + .no_write_same = 1, }; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 36ac1c34ce97..573f4128b6b6 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6305,7 +6305,8 @@ static struct scsi_host_template driver_template = { .use_clustering = ENABLE_CLUSTERING, .shost_attrs = ipr_ioa_attrs, .sdev_attrs = ipr_dev_attrs, - .proc_name = IPR_NAME + .proc_name = IPR_NAME, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 8d5ea8a1e5a6..52a216f21ae5 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = { .sg_tablesize = IPS_MAX_SG, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 90c95a3385d1..816db12ef5d5 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4244,6 +4244,7 @@ static struct scsi_host_template megaraid_template = { .eh_device_reset_handler = megaraid_reset, .eh_bus_reset_handler = megaraid_reset, .eh_host_reset_handler = megaraid_reset, + .no_write_same = 1, }; static int diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d1a4b82836ea..e2237a97cb9d 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = { .eh_host_reset_handler = megaraid_reset_handler, .change_queue_depth = megaraid_change_queue_depth, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, .sdev_attrs = megaraid_sdev_attrs, .shost_attrs = megaraid_shost_attrs, }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0a743a5d1647..c99812bf2a73 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2148,6 +2148,7 @@ static struct scsi_host_template megasas_template = { .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, .change_queue_depth = megasas_change_queue_depth, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..f413ef796b43 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -4315,6 +4315,7 @@ static struct scsi_host_template pmcraid_host_template = { .this_id = -1, .sg_tablesize = PMCRAID_MAX_IOADLS, .max_sectors = PMCRAID_IOA_MAX_SECTORS, + .no_write_same = 1, .cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = pmcraid_host_attrs, diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e6c4bff04339..69725f7c32c1 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2659,6 +2659,12 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) { struct scsi_device *sdev = sdkp->device; + if (sdev->host->no_write_same) { + sdev->no_write_same = 1; + + return; + } + if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { /* too large values might cause issues with arcmsr */ int vpd_buf_len = 64; diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1a28f5632797..17d740427240 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1697,6 +1697,7 @@ static struct scsi_host_template scsi_driver = { .use_clustering = DISABLE_CLUSTERING, /* Make sure we dont get a sg segment crosses a page boundary */ .dma_boundary = PAGE_SIZE-1, + .no_write_same = 1, }; enum { diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 546084964d55..fe3b58e836c8 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -475,6 +475,9 @@ struct scsi_host_template { */ unsigned ordered_tag:1; + /* True if the controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Countdown for host blocking with no commands outstanding. */ @@ -677,6 +680,9 @@ struct Scsi_Host { /* Don't resume host in EH */ unsigned eh_noresume:1; + /* The controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Optional work queue to be utilized by the transport */ -- cgit v1.2.3 From 2e311fbabdc23b7eaec77313dc3b9a151a5407b5 Mon Sep 17 00:00:00 2001 From: Stephen M. Cameron Date: Mon, 23 Sep 2013 13:33:41 -0500 Subject: [SCSI] hpsa: do not discard scsi status on aborted commands We inadvertantly discarded the scsi status for aborted commands. For some commands (e.g. reads from tape drives) these can't be retried, and if we discarded the scsi status, the scsi mid layer couldn't notice anything was wrong and the error was not reported. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 2336beff7a48..595a2a711548 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1289,7 +1289,7 @@ static void complete_scsi_command(struct CommandList *cp) "has check condition: aborted command: " "ASC: 0x%x, ASCQ: 0x%x\n", cp, asc, ascq); - cmd->result = DID_SOFT_ERROR << 16; + cmd->result |= DID_SOFT_ERROR << 16; break; } /* Must be some other type of check condition */ -- cgit v1.2.3 From 88bf6d62db4393fa03a58bada9d746312d5b496f Mon Sep 17 00:00:00 2001 From: Stephen M. Cameron Date: Fri, 1 Nov 2013 11:02:25 -0500 Subject: [SCSI] hpsa: return 0 from driver probe function on success, not 1 A return value of 1 is interpreted as an error. See pci_driver. in local_pci_probe(). If you're wondering how this ever could have worked, it's because it used to be the case that only return values less than zero were interpreted as failure. But even in the current kernel if the driver registers its various entry points with the kernel, and then returns a value which is interpreted as failure, those registrations aren't undone, so the driver still mostly works. However, the driver's remove function wouldn't be called on rmmod, and pci power management functions wouldn't work. In the case of Smart Array, since it has a battery backed cache (or else no cache) even if the driver is not shut down properly as long as there is no outstanding i/o, nothing too bad happens, which is why it took so long to notice. Requesting backport to stable because the change to pci-driver.c which requires driver probe functions to return 0 occurred between 2.6.35 and 2.6.36 (the pci power management breakage) and again between 3.7 and 3.8 (pci_dev->driver getting set to NULL in local_pci_probe() preventing driver remove function from being called on rmmod.) Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 595a2a711548..20a5e6ecf945 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -4926,7 +4926,7 @@ reinit_after_soft_reset: hpsa_hba_inquiry(h); hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ start_controller_lockup_detector(h); - return 1; + return 0; clean4: hpsa_free_sg_chain_blocks(h); -- cgit v1.2.3 From 94f33c16f2108ad02599de2459c903ad45d825dc Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 13 Nov 2013 15:35:23 +0530 Subject: [SCSI] pm80xx: Module author addition Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 34f5f5ffef05..03d3ef41f449 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -1169,6 +1169,7 @@ module_exit(pm8001_exit); MODULE_AUTHOR("Jack Wang "); MODULE_AUTHOR("Anand Kumar Santhanam "); MODULE_AUTHOR("Sangeetha Gnanasekaran "); +MODULE_AUTHOR("Nikith Ganigarakoppal "); MODULE_DESCRIPTION( "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 " "SAS/SATA controller driver"); -- cgit v1.2.3 From 34a9b81b476ea0fa7a2e7ec642830f690eb093aa Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 30 Oct 2013 16:13:22 +0530 Subject: [SCSI] pm80xx: Fix for direct attached device. In case of direct attached SATA device delay is not enough. It will give crash for set device state command response and wait_for_completion is the best solution for this. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index f4eb18e51631..f50ac44b950e 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -1098,15 +1098,17 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun) struct pm8001_tmf_task tmf_task; struct pm8001_device *pm8001_dev = dev->lldd_dev; struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + DECLARE_COMPLETION_ONSTACK(completion_setstate); if (dev_is_sata(dev)) { struct sas_phy *phy = sas_get_local_phy(dev); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , dev, 1, 0); rc = sas_phy_reset(phy, 1); sas_put_local_phy(phy); + pm8001_dev->setds_completion = &completion_setstate; rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, pm8001_dev, 0x01); - msleep(2000); + wait_for_completion(&completion_setstate); } else { tmf_task.tmf = TMF_LU_RESET; rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); -- cgit v1.2.3 From 7d029005484a6125a91a075518b9cfde830bc709 Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Wed, 30 Oct 2013 16:23:47 +0530 Subject: [SCSI] pm80xx: Resetting the phy state. Setting the phy state for hard reset response. After sending hard reset for a device ,phy down event sets the phy state to zero but for phy up event it will not set the phy state again.This will cause problem to successive hard resets. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 2 ++ drivers/scsi/pm8001/pm8001_hwi.h | 4 ++++ drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++ drivers/scsi/pm8001/pm80xx_hwi.h | 2 ++ 4 files changed, 10 insertions(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index f16ece91b94a..0a1296a87d66 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3403,6 +3403,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; PM8001_MSG_DBG(pm8001_ha, pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", port_id, phy_id)); @@ -3483,6 +3484,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," " phy id = %d\n", port_id, phy_id)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPC; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 6d91e2446542..e4867e690c84 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -131,6 +131,10 @@ #define LINKRATE_30 (0x02 << 8) #define LINKRATE_60 (0x04 << 8) +/* for phy state */ + +#define PHY_STATE_LINK_UP_SPC 0x1 + /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */ #define GSM_SM_BASE 0x4F0000 struct mpi_msg_hdr{ diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 8987b1706216..c950dc5c9943 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -2894,6 +2894,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; PM8001_MSG_DBG(pm8001_ha, pm8001_printk( "portid:%d; phyid:%d; linkrate:%d; " "portstate:%x; devicetype:%x\n", @@ -2978,6 +2979,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) port_id, phy_id, link_rate, portstate)); port->port_state = portstate; + phy->phy_state = PHY_STATE_LINK_UP_SPCV; port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index c86816bea424..9970a385795d 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -215,6 +215,8 @@ #define SAS_DOPNRJT_RTRY_TMO 128 #define SAS_COPNRJT_RTRY_TMO 128 +/* for phy state */ +#define PHY_STATE_LINK_UP_SPCV 0x2 /* Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second. Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128 -- cgit v1.2.3 From 6cd60b37f72b2d15b8983431546af50b7064935d Mon Sep 17 00:00:00 2001 From: Nikith Ganigarakoppal Date: Mon, 11 Nov 2013 15:28:14 +0530 Subject: [SCSI] pm80xx: Tasklets synchronization fix. When multiple vectors are used, the vector variable is over written, resulting in unhandled operation for those vectors. This fix prevents the problem by maitaining HBA instance and vector values for each irq. [jejb: checkpatch fixes] Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_init.c | 90 ++++++++++++++++++++++----------------- drivers/scsi/pm8001/pm8001_sas.h | 9 ++-- 2 files changed, 58 insertions(+), 41 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 03d3ef41f449..73a120d81b4d 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -175,20 +175,16 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) static void pm8001_tasklet(unsigned long opaque) { struct pm8001_hba_info *pm8001_ha; - u32 vec; - pm8001_ha = (struct pm8001_hba_info *)opaque; + struct isr_param *irq_vector; + + irq_vector = (struct isr_param *)opaque; + pm8001_ha = irq_vector->drv_inst; if (unlikely(!pm8001_ha)) BUG_ON(1); - vec = pm8001_ha->int_vector; - PM8001_CHIP_DISP->isr(pm8001_ha, vec); + PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); } #endif -static struct pm8001_hba_info *outq_to_hba(u8 *outq) -{ - return container_of((outq - *outq), struct pm8001_hba_info, outq[0]); -} - /** * pm8001_interrupt_handler_msix - main MSIX interrupt handler. * It obtains the vector number and calls the equivalent bottom @@ -198,18 +194,20 @@ static struct pm8001_hba_info *outq_to_hba(u8 *outq) */ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) { - struct pm8001_hba_info *pm8001_ha = outq_to_hba(opaque); - u8 outq = *(u8 *)opaque; + struct isr_param *irq_vector; + struct pm8001_hba_info *pm8001_ha; irqreturn_t ret = IRQ_HANDLED; + irq_vector = (struct isr_param *)opaque; + pm8001_ha = irq_vector->drv_inst; + if (unlikely(!pm8001_ha)) return IRQ_NONE; if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) return IRQ_NONE; - pm8001_ha->int_vector = outq; #ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet); + tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]); #else - ret = PM8001_CHIP_DISP->isr(pm8001_ha, outq); + ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); #endif return ret; } @@ -230,9 +228,8 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) return IRQ_NONE; - pm8001_ha->int_vector = 0; #ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet); + tasklet_schedule(&pm8001_ha->tasklet[0]); #else ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0); #endif @@ -457,7 +454,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, { struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); - + int j; pm8001_ha = sha->lldd_ha; if (!pm8001_ha) @@ -480,12 +477,14 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, pm8001_ha->iomb_size = IOMB_SIZE_SPC; #ifdef PM8001_USE_TASKLET - /** - * default tasklet for non msi-x interrupt handler/first msi-x - * interrupt handler - **/ - tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet, - (unsigned long)pm8001_ha); + /* Tasklet for non msi-x interrupt handler */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[0])); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[j])); #endif pm8001_ioremap(pm8001_ha); if (!pm8001_alloc(pm8001_ha, ent)) @@ -733,19 +732,20 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) "pci_enable_msix request ret:%d no of intr %d\n", rc, pm8001_ha->number_of_intr)); - for (i = 0; i < number_of_intr; i++) - pm8001_ha->outq[i] = i; for (i = 0; i < number_of_intr; i++) { snprintf(intr_drvname[i], sizeof(intr_drvname[0]), DRV_NAME"%d", i); + pm8001_ha->irq_vector[i].irq_id = i; + pm8001_ha->irq_vector[i].drv_inst = pm8001_ha; + if (request_irq(pm8001_ha->msix_entries[i].vector, pm8001_interrupt_handler_msix, flag, - intr_drvname[i], &pm8001_ha->outq[i])) { + intr_drvname[i], &(pm8001_ha->irq_vector[i]))) { for (j = 0; j < i; j++) free_irq( pm8001_ha->msix_entries[j].vector, - &pm8001_ha->outq[j]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pm8001_ha->pdev); break; } @@ -907,7 +907,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; - int i; + int i, j; pm8001_ha = sha->lldd_ha; sas_unregister_ha(sha); sas_remove_host(pm8001_ha->shost); @@ -921,13 +921,18 @@ static void pm8001_pci_remove(struct pci_dev *pdev) synchronize_irq(pm8001_ha->msix_entries[i].vector); for (i = 0; i < pm8001_ha->number_of_intr; i++) free_irq(pm8001_ha->msix_entries[i].vector, - &pm8001_ha->outq[i]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pdev); #else free_irq(pm8001_ha->irq, sha); #endif #ifdef PM8001_USE_TASKLET - tasklet_kill(&pm8001_ha->tasklet); + /* For non-msix and msix interrupts */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_kill(&pm8001_ha->tasklet[0]); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_kill(&pm8001_ha->tasklet[j]); #endif pm8001_free(pm8001_ha); kfree(sha->sas_phy); @@ -948,7 +953,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; - int i; + int i, j; u32 device_state; pm8001_ha = sha->lldd_ha; flush_workqueue(pm8001_wq); @@ -964,13 +969,18 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state) synchronize_irq(pm8001_ha->msix_entries[i].vector); for (i = 0; i < pm8001_ha->number_of_intr; i++) free_irq(pm8001_ha->msix_entries[i].vector, - &pm8001_ha->outq[i]); + &(pm8001_ha->irq_vector[i])); pci_disable_msix(pdev); #else free_irq(pm8001_ha->irq, sha); #endif #ifdef PM8001_USE_TASKLET - tasklet_kill(&pm8001_ha->tasklet); + /* For non-msix and msix interrupts */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_kill(&pm8001_ha->tasklet[0]); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_kill(&pm8001_ha->tasklet[j]); #endif device_state = pci_choose_state(pdev, state); pm8001_printk("pdev=0x%p, slot=%s, entering " @@ -993,7 +1003,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev) struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; int rc; - u8 i = 0; + u8 i = 0, j; u32 device_state; pm8001_ha = sha->lldd_ha; device_state = pdev->current_state; @@ -1033,10 +1043,14 @@ static int pm8001_pci_resume(struct pci_dev *pdev) if (rc) goto err_out_disable; #ifdef PM8001_USE_TASKLET - /* default tasklet for non msi-x interrupt handler/first msi-x - * interrupt handler */ - tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet, - (unsigned long)pm8001_ha); + /* Tasklet for non msi-x interrupt handler */ + if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001)) + tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[0])); + else + for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) + tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[j])); #endif PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0); if (pm8001_ha->chip_id != chip_8001) { diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 6037d477a183..6c5fd5ee22d3 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -466,6 +466,10 @@ struct pm8001_hba_memspace { u64 membase; u32 memsize; }; +struct isr_param { + struct pm8001_hba_info *drv_inst; + u32 irq_id; +}; struct pm8001_hba_info { char name[PM8001_NAME_LENGTH]; struct list_head list; @@ -519,14 +523,13 @@ struct pm8001_hba_info { int number_of_intr;/*will be used in remove()*/ #endif #ifdef PM8001_USE_TASKLET - struct tasklet_struct tasklet; + struct tasklet_struct tasklet[PM8001_MAX_MSIX_VEC]; #endif u32 logging_level; u32 fw_status; u32 smp_exp_mode; - u32 int_vector; const struct firmware *fw_image; - u8 outq[PM8001_MAX_MSIX_VEC]; + struct isr_param irq_vector[PM8001_MAX_MSIX_VEC]; }; struct pm8001_work { -- cgit v1.2.3 From 22a08538dca5c0630226f1c0c58dccd12e463d22 Mon Sep 17 00:00:00 2001 From: Vijaya Mohan Guvva Date: Thu, 21 Nov 2013 01:37:49 -0800 Subject: [SCSI] bfa: Fix crash when symb name set for offline vport This patch fixes a crash when tried setting symbolic name for an offline vport through sysfs. Crash is due to uninitialized pointer lport->ns, which gets initialized only on linkup (port online). Signed-off-by: Vijaya Mohan Guvva Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfa_fcs.h | 1 + drivers/scsi/bfa/bfa_fcs_lport.c | 14 +++++++++++--- drivers/scsi/bfa/bfad_attr.c | 7 ++----- 3 files changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h index 94d5d0102f7d..42bcb970445a 100644 --- a/drivers/scsi/bfa/bfa_fcs.h +++ b/drivers/scsi/bfa/bfa_fcs.h @@ -296,6 +296,7 @@ wwn_t bfa_fcs_lport_get_rport(struct bfa_fcs_lport_s *port, wwn_t wwn, struct bfa_fcs_lport_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t lpwwn); +void bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, char *symname); void bfa_fcs_lport_get_info(struct bfa_fcs_lport_s *port, struct bfa_lport_info_s *port_info); void bfa_fcs_lport_get_attr(struct bfa_fcs_lport_s *port, diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index 2f61a5af3658..f5e4e61a0fd7 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -1097,6 +1097,17 @@ bfa_fcs_lport_init(struct bfa_fcs_lport_s *lport, bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE); } +void +bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, + char *symname) +{ + strcpy(port->port_cfg.sym_name.symname, symname); + + if (bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online)) + bfa_fcs_lport_ns_util_send_rspn_id( + BFA_FCS_GET_NS_FROM_PORT(port), NULL); +} + /* * fcs_lport_api */ @@ -5140,9 +5151,6 @@ bfa_fcs_lport_ns_util_send_rspn_id(void *cbarg, struct bfa_fcxp_s *fcxp_alloced) u8 *psymbl = &symbl[0]; int len; - if (!bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online)) - return; - /* Avoid sending RSPN in the following states. */ if (bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_offline) || bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_plogi_sending) || diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index e9a681d31223..40be670a1cbc 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -593,11 +593,8 @@ bfad_im_vport_set_symbolic_name(struct fc_vport *fc_vport) return; spin_lock_irqsave(&bfad->bfad_lock, flags); - if (strlen(sym_name) > 0) { - strcpy(fcs_vport->lport.port_cfg.sym_name.symname, sym_name); - bfa_fcs_lport_ns_util_send_rspn_id( - BFA_FCS_GET_NS_FROM_PORT((&fcs_vport->lport)), NULL); - } + if (strlen(sym_name) > 0) + bfa_fcs_lport_set_symname(&fcs_vport->lport, sym_name); spin_unlock_irqrestore(&bfad->bfad_lock, flags); } -- cgit v1.2.3 From 63832aabec12a28a41a221773ab3819d30ba0a67 Mon Sep 17 00:00:00 2001 From: Shivaram Upadhyayula Date: Tue, 10 Dec 2013 16:06:40 +0530 Subject: qla2xxx: Fix schedule_delayed_work() for target timeout calculations This patch fixes two cases in qla_target.c code where the schedule_delayed_work() value was being incorrectly calculated from sess->expires - jiffies. Signed-off-by: Shivaram U Cc: #3.6+ Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 596480022b0a..3bb0a1d1622a 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -471,7 +471,7 @@ static void qlt_schedule_sess_for_deletion(struct qla_tgt_sess *sess, schedule_delayed_work(&tgt->sess_del_work, 0); else schedule_delayed_work(&tgt->sess_del_work, - jiffies - sess->expires); + sess->expires - jiffies); } /* ha->hardware_lock supposed to be held on entry */ @@ -550,13 +550,14 @@ static void qlt_del_sess_work_fn(struct delayed_work *work) struct scsi_qla_host *vha = tgt->vha; struct qla_hw_data *ha = vha->hw; struct qla_tgt_sess *sess; - unsigned long flags; + unsigned long flags, elapsed; spin_lock_irqsave(&ha->hardware_lock, flags); while (!list_empty(&tgt->del_sess_list)) { sess = list_entry(tgt->del_sess_list.next, typeof(*sess), del_list_entry); - if (time_after_eq(jiffies, sess->expires)) { + elapsed = jiffies; + if (time_after_eq(elapsed, sess->expires)) { qlt_undelete_sess(sess); ql_dbg(ql_dbg_tgt_mgt, vha, 0xf004, @@ -566,7 +567,7 @@ static void qlt_del_sess_work_fn(struct delayed_work *work) ha->tgt.tgt_ops->put_sess(sess); } else { schedule_delayed_work(&tgt->sess_del_work, - jiffies - sess->expires); + sess->expires - elapsed); break; } } -- cgit v1.2.3 From dcd211997ddba3229e875f5990ea14f920934729 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 17 Dec 2013 01:51:22 -0800 Subject: qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure This patch fixes a possible scsi_host reference leak in qlt_lport_register(), when a non zero return from the passed (*callback) does not call drop the local reference via scsi_host_put() before returning. This currently does not effect existing tcm_qla2xxx code as the passed callback will never fail, but fix this up regardless for future code. Cc: Chad Dupuis Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 3bb0a1d1622a..38a1257e76e1 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -4291,6 +4291,7 @@ int qlt_lport_register(struct qla_tgt_func_tmpl *qla_tgt_ops, u64 wwpn, if (rc != 0) { ha->tgt.tgt_ops = NULL; ha->tgt.target_lport_ptr = NULL; + scsi_host_put(host); } mutex_unlock(&qla_tgt_mutex); return rc; -- cgit v1.2.3