From c6084cbce435fbf800f47026896137b3bae483c3 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sun, 3 Jan 2016 16:06:19 +1100 Subject: ncr5380: Add support for HP C2502 HP C2502 cards (based on 53C400A chips) use different magic numbers for software-based I/O address configuration than other cards. The configuration is also extended to allow setting the IRQ. Move the configuration to a new function magic_configure() and move magic the magic numbers into an array. Add new magic numbers for these HP cards and hp_c2502 module parameter to use them, e.g.: modprobe g_NCR5380 ncr_irq=7 ncr_addr=0x280 hp_c2502=1 Tested with HP C2502 and DTCT-436P. Signed-off-by: Ondrej Zary Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/g_NCR5380.c | 74 +++++++++++++++++++++++++++++++++++++----------- drivers/scsi/g_NCR5380.h | 1 + 2 files changed, 59 insertions(+), 16 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 5030cc0dd90a..90091e693020 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -80,6 +80,7 @@ static int ncr_5380; static int ncr_53c400; static int ncr_53c400a; static int dtc_3181e; +static int hp_c2502; static struct override { NCR5380_map_type NCR5380_map_name; @@ -225,6 +226,30 @@ static int __init do_DTC3181E_setup(char *str) #endif +#ifndef SCSI_G_NCR5380_MEM +/* + * Configure I/O address of 53C400A or DTC436 by writing magic numbers + * to ports 0x779 and 0x379. + */ +static void magic_configure(int idx, u8 irq, u8 magic[]) +{ + u8 cfg = 0; + + outb(magic[0], 0x779); + outb(magic[1], 0x379); + outb(magic[2], 0x379); + outb(magic[3], 0x379); + outb(magic[4], 0x379); + + /* allowed IRQs for HP C2502 */ + if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7) + irq = 0; + if (idx >= 0 && idx <= 7) + cfg = 0x80 | idx | (irq << 4); + outb(cfg, 0x379); +} +#endif + /** * generic_NCR5380_detect - look for NCR5380 controllers * @tpnt: the scsi template @@ -241,8 +266,10 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) static int current_override; int count; unsigned int *ports; + u8 *magic = NULL; #ifndef SCSI_G_NCR5380_MEM int i; + int port_idx = -1; unsigned long region_size = 16; #endif static unsigned int __initdata ncr_53c400a_ports[] = { @@ -251,6 +278,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) static unsigned int __initdata dtc_3181e_ports[] = { 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0 }; + static u8 ncr_53c400a_magic[] __initdata = { /* 53C400A & DTC436 */ + 0x59, 0xb9, 0xc5, 0xae, 0xa6 + }; + static u8 hp_c2502_magic[] __initdata = { /* HP C2502 */ + 0x0f, 0x22, 0xf0, 0x20, 0x80 + }; int flags; struct Scsi_Host *instance; struct NCR5380_hostdata *hostdata; @@ -273,6 +306,8 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) overrides[0].board = BOARD_NCR53C400A; else if (dtc_3181e) overrides[0].board = BOARD_DTC3181E; + else if (hp_c2502) + overrides[0].board = BOARD_HP_C2502; #ifndef SCSI_G_NCR5380_MEM if (!current_override && isapnp_present()) { struct pnp_dev *dev = NULL; @@ -325,24 +360,26 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) case BOARD_NCR53C400A: flags = FLAG_NO_DMA_FIXUP; ports = ncr_53c400a_ports; + magic = ncr_53c400a_magic; + break; + case BOARD_HP_C2502: + flags = FLAG_NO_DMA_FIXUP; + ports = ncr_53c400a_ports; + magic = hp_c2502_magic; break; case BOARD_DTC3181E: flags = FLAG_NO_DMA_FIXUP; ports = dtc_3181e_ports; + magic = ncr_53c400a_magic; break; } #ifndef SCSI_G_NCR5380_MEM - if (ports) { + if (ports && magic) { /* wakeup sequence for the NCR53C400A and DTC3181E */ /* Disable the adapter and look for a free io port */ - outb(0x59, 0x779); - outb(0xb9, 0x379); - outb(0xc5, 0x379); - outb(0xae, 0x379); - outb(0xa6, 0x379); - outb(0x00, 0x379); + magic_configure(-1, 0, magic); if (overrides[current_override].NCR5380_map_name != PORT_AUTO) for (i = 0; ports[i]; i++) { @@ -361,17 +398,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) } if (ports[i]) { /* At this point we have our region reserved */ - outb(0x59, 0x779); - outb(0xb9, 0x379); - outb(0xc5, 0x379); - outb(0xae, 0x379); - outb(0xa6, 0x379); - outb(0x80 | i, 0x379); /* set io port to be used */ + magic_configure(i, 0, magic); /* no IRQ yet */ outb(0xc0, ports[i] + 9); if (inb(ports[i] + 9) != 0x80) continue; - else - overrides[current_override].NCR5380_map_name = ports[i]; + overrides[current_override].NCR5380_map_name = ports[i]; + port_idx = i; } else continue; } @@ -417,6 +449,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) hostdata->io_width = 2; /* 16-bit PDMA */ /* fall through */ case BOARD_NCR53C400A: + case BOARD_HP_C2502: hostdata->c400_ctl_status = 9; hostdata->c400_blk_cnt = 10; hostdata->c400_host_buf = 8; @@ -433,6 +466,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) break; case BOARD_DTC3181E: case BOARD_NCR53C400A: + case BOARD_HP_C2502: pr_err(DRV_MODULE_NAME ": unknown register offsets\n"); goto out_unregister; } @@ -445,6 +479,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) case BOARD_NCR53C400: case BOARD_DTC3181E: case BOARD_NCR53C400A: + case BOARD_HP_C2502: NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); } @@ -459,12 +494,18 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt) if (instance->irq == 255) instance->irq = NO_IRQ; - if (instance->irq != NO_IRQ) + if (instance->irq != NO_IRQ) { +#ifndef SCSI_G_NCR5380_MEM + /* set IRQ for HP C2502 */ + if (overrides[current_override].board == BOARD_HP_C2502) + magic_configure(port_idx, instance->irq, magic); +#endif if (request_irq(instance->irq, generic_NCR5380_intr, 0, "NCR5380", instance)) { printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = NO_IRQ; } + } if (instance->irq == NO_IRQ) { printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); @@ -751,6 +792,7 @@ module_param(ncr_5380, int, 0); module_param(ncr_53c400, int, 0); module_param(ncr_53c400a, int, 0); module_param(dtc_3181e, int, 0); +module_param(hp_c2502, int, 0); MODULE_LICENSE("GPL"); #if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE) diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h index 5ab64d96b576..6f3d2ac4f185 100644 --- a/drivers/scsi/g_NCR5380.h +++ b/drivers/scsi/g_NCR5380.h @@ -88,6 +88,7 @@ #define BOARD_NCR53C400 1 #define BOARD_NCR53C400A 2 #define BOARD_DTC3181E 3 +#define BOARD_HP_C2502 4 #endif /* GENERIC_NCR5380_H */ -- cgit v1.2.3