From c137fb8909c1d14f2fca43ceaaf68ba26731741d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 8 Dec 2021 17:12:11 -0300 Subject: soc: imx: Remove Layerscape check Since commit 4ebd29f91629 ("soc: imx: Register SoC device only on i.MX boards") the soc-imx driver is only registered on i.MX platforms as intended. This means that we no longer need to do a specific check for Layerscape. Remove the now unneeded "fsl,ls1021a" check. Signed-off-by: Fabio Estevam Reviewed-by: Horia Geantă Signed-off-by: Shawn Guo --- drivers/soc/imx/soc-imx.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/soc') diff --git a/drivers/soc/imx/soc-imx.c b/drivers/soc/imx/soc-imx.c index 77bc12039c3d..fab668c83f98 100644 --- a/drivers/soc/imx/soc-imx.c +++ b/drivers/soc/imx/soc-imx.c @@ -40,9 +40,6 @@ static int __init imx_soc_device_init(void) if (!__mxc_cpu_type) return 0; - if (of_machine_is_compatible("fsl,ls1021a")) - return 0; - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return -ENOMEM; -- cgit v1.2.3 From 608d7c325e855cb4a853afef3cd9f0df594bd12d Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 25 Jan 2022 11:11:21 -0600 Subject: soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl This adds the necessary bits to drive the VPU blk-ctrl on the i.MX8MQ, to avoid putting more of this functionality into the decoder driver. Signed-off-by: Lucas Stach Signed-off-by: Adam Ford Signed-off-by: Shawn Guo --- drivers/soc/imx/imx8m-blk-ctrl.c | 66 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'drivers/soc') diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c index 511e74f0db8a..122f9c884b38 100644 --- a/drivers/soc/imx/imx8m-blk-ctrl.c +++ b/drivers/soc/imx/imx8m-blk-ctrl.c @@ -15,6 +15,7 @@ #include #include +#include #define BLK_SFT_RSTN 0x0 #define BLK_CLK_EN 0x4 @@ -589,6 +590,68 @@ static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = { .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data), }; +static int imx8mq_vpu_power_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl, + power_nb); + + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF) + return NOTIFY_OK; + + /* + * The ADB in the VPUMIX domain has no separate reset and clock + * enable bits, but is ungated and reset together with the VPUs. The + * reset and clock enable inputs to the ADB is a logical OR of the + * VPU bits. In order to set the G2 fuse bits, the G2 clock must + * also be enabled. + */ + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(0) | BIT(1)); + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(0) | BIT(1)); + + if (action == GENPD_NOTIFY_ON) { + /* + * On power up we have no software backchannel to the GPC to + * wait for the ADB handshake to happen, so we just delay for a + * bit. On power down the GPC driver waits for the handshake. + */ + udelay(5); + + /* set "fuse" bits to enable the VPUs */ + regmap_set_bits(bc->regmap, 0x8, 0xffffffff); + regmap_set_bits(bc->regmap, 0xc, 0xffffffff); + regmap_set_bits(bc->regmap, 0x10, 0xffffffff); + } + + return NOTIFY_OK; +} + +static const struct imx8m_blk_ctrl_domain_data imx8mq_vpu_blk_ctl_domain_data[] = { + [IMX8MQ_VPUBLK_PD_G1] = { + .name = "vpublk-g1", + .clk_names = (const char *[]){ "g1", }, + .num_clks = 1, + .gpc_name = "g1", + .rst_mask = BIT(1), + .clk_mask = BIT(1), + }, + [IMX8MQ_VPUBLK_PD_G2] = { + .name = "vpublk-g2", + .clk_names = (const char *[]){ "g2", }, + .num_clks = 1, + .gpc_name = "g2", + .rst_mask = BIT(0), + .clk_mask = BIT(0), + }, +}; + +static const struct imx8m_blk_ctrl_data imx8mq_vpu_blk_ctl_dev_data = { + .max_reg = 0x14, + .power_notifier_fn = imx8mq_vpu_power_notifier, + .domains = imx8mq_vpu_blk_ctl_domain_data, + .num_domains = ARRAY_SIZE(imx8mq_vpu_blk_ctl_domain_data), +}; + static const struct of_device_id imx8m_blk_ctrl_of_match[] = { { .compatible = "fsl,imx8mm-vpu-blk-ctrl", @@ -599,6 +662,9 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = { }, { .compatible = "fsl,imx8mn-disp-blk-ctrl", .data = &imx8mn_disp_blk_ctl_dev_data + }, { + .compatible = "fsl,imx8mq-vpu-blk-ctrl", + .data = &imx8mq_vpu_blk_ctl_dev_data }, { /* Sentinel */ } -- cgit v1.2.3