From 0514dd76ea556859d398aaff725817e1c97579ea Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 6 May 2013 20:32:09 +0100 Subject: spi/omap2: Let device core handle pinctrl Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 86d2158946bb..000922abcb87 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -38,7 +38,6 @@ #include #include #include -#include #include @@ -1186,7 +1185,6 @@ static int omap2_mcspi_probe(struct platform_device *pdev) static int bus_num = 1; struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; - struct pinctrl *pinctrl; master = spi_alloc_master(&pdev->dev, sizeof *mcspi); if (master == NULL) { @@ -1284,11 +1282,6 @@ static int omap2_mcspi_probe(struct platform_device *pdev) if (status < 0) goto dma_chnl_free; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) - dev_warn(&pdev->dev, - "pins are not configured from the driver\n"); - pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); pm_runtime_enable(&pdev->dev); -- cgit v1.2.3 From 56cd5c1578135120d73a7054140855728f8cca36 Mon Sep 17 00:00:00 2001 From: Illia Smyrnov Date: Fri, 14 Jun 2013 19:12:07 +0300 Subject: spi: omap2-mcspi: Move bytes per word calculation to the function Introduce mcspi_bytes_per_word function as replacement for the next code fragment: int c = (word_len <= 8) ? 1 : (word_len <= 16) ? 2 : /* word_len <= 32 */ 4; This code used 2 times in current driver code and will be used 2 times in the next FIFO buffer support patch. Replace it with inline function with clear name to improve code legibility. Signed-off-by: Illia Smyrnov Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 000922abcb87..5a93a0df551f 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -186,6 +186,16 @@ static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); } +static inline int mcspi_bytes_per_word(int word_len) +{ + if (word_len <= 8) + return 1; + else if (word_len <= 16) + return 2; + else /* word_len <= 32 */ + return 4; +} + static void omap2_mcspi_set_dma_req(const struct spi_device *spi, int is_read, int enable) { @@ -432,10 +442,9 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, else /* word_len <= 32 */ ((u32 *)xfer->rx_buf)[elements++] = w; } else { + int bytes_per_word = mcspi_bytes_per_word(word_len); dev_err(&spi->dev, "DMA RX penultimate word empty"); - count -= (word_len <= 8) ? 2 : - (word_len <= 16) ? 4 : - /* word_len <= 32 */ 8; + count -= (bytes_per_word << 1); omap2_mcspi_set_enable(spi, 1); return count; } @@ -453,9 +462,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, ((u32 *)xfer->rx_buf)[elements] = w; } else { dev_err(&spi->dev, "DMA RX last word empty"); - count -= (word_len <= 8) ? 1 : - (word_len <= 16) ? 2 : - /* word_len <= 32 */ 4; + count -= mcspi_bytes_per_word(word_len); } omap2_mcspi_set_enable(spi, 1); return count; -- cgit v1.2.3 From d33f473dcd8e69321f001ba330d648f475b504c9 Mon Sep 17 00:00:00 2001 From: Illia Smyrnov Date: Mon, 17 Jun 2013 16:31:06 +0300 Subject: spi: omap2-mcspi: Add FIFO buffer support The MCSPI controller has a built-in FIFO buffer to unload the DMA or interrupt handler and improve data throughput. This patch adds FIFO buffer support for SPI transfers in DMA mode. For SPI transfers in DMA mode, the largest possible FIFO buffer size will be calculated and set up. The FIFO won't be used for the SPI transfers in DMA mode if: calculated FIFO buffer size is less then 2 bytes or the FIFO buffer size isn't multiple of the SPI word length. Signed-off-by: Illia Smyrnov Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 147 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 130 insertions(+), 17 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 5a93a0df551f..6802806d1f18 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -38,12 +38,15 @@ #include #include #include +#include #include #include #define OMAP2_MCSPI_MAX_FREQ 48000000 +#define OMAP2_MCSPI_MAX_FIFODEPTH 64 +#define OMAP2_MCSPI_MAX_FIFOWCNT 0xFFFF #define SPI_AUTOSUSPEND_TIMEOUT 2000 #define OMAP2_MCSPI_REVISION 0x00 @@ -53,6 +56,7 @@ #define OMAP2_MCSPI_WAKEUPENABLE 0x20 #define OMAP2_MCSPI_SYST 0x24 #define OMAP2_MCSPI_MODULCTRL 0x28 +#define OMAP2_MCSPI_XFERLEVEL 0x7c /* per-channel banks, 0x14 bytes each, first is: */ #define OMAP2_MCSPI_CHCONF0 0x2c @@ -62,6 +66,7 @@ #define OMAP2_MCSPI_RX0 0x3c /* per-register bitmasks: */ +#define OMAP2_MCSPI_IRQSTATUS_EOW BIT(17) #define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0) #define OMAP2_MCSPI_MODULCTRL_MS BIT(2) @@ -82,10 +87,13 @@ #define OMAP2_MCSPI_CHCONF_IS BIT(18) #define OMAP2_MCSPI_CHCONF_TURBO BIT(19) #define OMAP2_MCSPI_CHCONF_FORCE BIT(20) +#define OMAP2_MCSPI_CHCONF_FFET BIT(27) +#define OMAP2_MCSPI_CHCONF_FFER BIT(28) #define OMAP2_MCSPI_CHSTAT_RXS BIT(0) #define OMAP2_MCSPI_CHSTAT_TXS BIT(1) #define OMAP2_MCSPI_CHSTAT_EOT BIT(2) +#define OMAP2_MCSPI_CHSTAT_TXFFE BIT(3) #define OMAP2_MCSPI_CHCTRL_EN BIT(0) @@ -128,6 +136,7 @@ struct omap2_mcspi { struct omap2_mcspi_dma *dma_channels; struct device *dev; struct omap2_mcspi_regs ctx; + int fifo_depth; unsigned int pin_dir:1; }; @@ -257,6 +266,58 @@ static void omap2_mcspi_set_master_mode(struct spi_master *master) ctx->modulctrl = l; } +static void omap2_mcspi_set_fifo(const struct spi_device *spi, + struct spi_transfer *t, int enable) +{ + struct spi_master *master = spi->master; + struct omap2_mcspi_cs *cs = spi->controller_state; + struct omap2_mcspi *mcspi; + unsigned int wcnt; + int fifo_depth, bytes_per_word; + u32 chconf, xferlevel; + + mcspi = spi_master_get_devdata(master); + + chconf = mcspi_cached_chconf0(spi); + if (enable) { + bytes_per_word = mcspi_bytes_per_word(cs->word_len); + if (t->len % bytes_per_word != 0) + goto disable_fifo; + + fifo_depth = gcd(t->len, OMAP2_MCSPI_MAX_FIFODEPTH); + if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0) + goto disable_fifo; + + wcnt = t->len / bytes_per_word; + if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT) + goto disable_fifo; + + xferlevel = wcnt << 16; + if (t->rx_buf != NULL) { + chconf |= OMAP2_MCSPI_CHCONF_FFER; + xferlevel |= (fifo_depth - 1) << 8; + } else { + chconf |= OMAP2_MCSPI_CHCONF_FFET; + xferlevel |= fifo_depth - 1; + } + + mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel); + mcspi_write_chconf0(spi, chconf); + mcspi->fifo_depth = fifo_depth; + + return; + } + +disable_fifo: + if (t->rx_buf != NULL) + chconf &= ~OMAP2_MCSPI_CHCONF_FFER; + else + chconf &= ~OMAP2_MCSPI_CHCONF_FFET; + + mcspi_write_chconf0(spi, chconf); + mcspi->fifo_depth = 0; +} + static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) { struct spi_master *spi_cntrl = mcspi->master; @@ -373,7 +434,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, { struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; - unsigned int count; + unsigned int count, dma_count; u32 l; int elements = 0; int word_len, element_count; @@ -381,6 +442,11 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; count = xfer->len; + dma_count = xfer->len; + + if (mcspi->fifo_depth == 0) + dma_count -= es; + word_len = cs->word_len; l = mcspi_cached_chconf0(spi); @@ -394,16 +460,15 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, if (mcspi_dma->dma_rx) { struct dma_async_tx_descriptor *tx; struct scatterlist sg; - size_t len = xfer->len - es; dmaengine_slave_config(mcspi_dma->dma_rx, &cfg); - if (l & OMAP2_MCSPI_CHCONF_TURBO) - len -= es; + if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0) + dma_count -= es; sg_init_table(&sg, 1); sg_dma_address(&sg) = xfer->rx_dma; - sg_dma_len(&sg) = len; + sg_dma_len(&sg) = dma_count; tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx, &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | @@ -423,6 +488,10 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer, wait_for_completion(&mcspi_dma->dma_rx_completion); dma_unmap_single(mcspi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); + + if (mcspi->fifo_depth > 0) + return count; + omap2_mcspi_set_enable(spi, 0); elements = element_count - 1; @@ -481,7 +550,10 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) struct dma_slave_config cfg; enum dma_slave_buswidth width; unsigned es; + u32 burst; void __iomem *chstat_reg; + void __iomem *irqstat_reg; + int wait_res; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; @@ -499,19 +571,27 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) es = 4; } + count = xfer->len; + burst = 1; + + if (mcspi->fifo_depth > 0) { + if (count > mcspi->fifo_depth) + burst = mcspi->fifo_depth / es; + else + burst = count / es; + } + memset(&cfg, 0, sizeof(cfg)); cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0; cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0; cfg.src_addr_width = width; cfg.dst_addr_width = width; - cfg.src_maxburst = 1; - cfg.dst_maxburst = 1; + cfg.src_maxburst = burst; + cfg.dst_maxburst = burst; rx = xfer->rx_buf; tx = xfer->tx_buf; - count = xfer->len; - if (tx != NULL) omap2_mcspi_tx_dma(spi, xfer, cfg); @@ -519,18 +599,38 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) count = omap2_mcspi_rx_dma(spi, xfer, cfg, es); if (tx != NULL) { - chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; wait_for_completion(&mcspi_dma->dma_tx_completion); dma_unmap_single(mcspi->dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE); + if (mcspi->fifo_depth > 0) { + irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS; + + if (mcspi_wait_for_reg_bit(irqstat_reg, + OMAP2_MCSPI_IRQSTATUS_EOW) < 0) + dev_err(&spi->dev, "EOW timed out\n"); + + mcspi_write_reg(mcspi->master, OMAP2_MCSPI_IRQSTATUS, + OMAP2_MCSPI_IRQSTATUS_EOW); + } + /* for TX_ONLY mode, be sure all words have shifted out */ if (rx == NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) - dev_err(&spi->dev, "TXS timed out\n"); - else if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_EOT) < 0) + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + if (mcspi->fifo_depth > 0) { + wait_res = mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXFFE); + if (wait_res < 0) + dev_err(&spi->dev, "TXFFE timed out\n"); + } else { + wait_res = mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS); + if (wait_res < 0) + dev_err(&spi->dev, "TXS timed out\n"); + } + if (wait_res >= 0 && + (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0)) dev_err(&spi->dev, "EOT timed out\n"); } } @@ -957,7 +1057,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) cs = spi->controller_state; cd = spi->controller_data; - omap2_mcspi_set_enable(spi, 1); + omap2_mcspi_set_enable(spi, 0); list_for_each_entry(t, &m->transfers, transfer_list) { if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { status = -EINVAL; @@ -1005,6 +1105,12 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) if (t->len) { unsigned count; + if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) && + (m->is_dma_mapped || t->len >= DMA_MIN_BYTES)) + omap2_mcspi_set_fifo(spi, t, 1); + + omap2_mcspi_set_enable(spi, 1); + /* RX_ONLY mode needs dummy data in TX reg */ if (t->tx_buf == NULL) __raw_writel(0, cs->base @@ -1031,6 +1137,11 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) omap2_mcspi_force_cs(spi, 0); cs_active = 0; } + + omap2_mcspi_set_enable(spi, 0); + + if (mcspi->fifo_depth > 0) + omap2_mcspi_set_fifo(spi, t, 0); } /* Restore defaults if they were overriden */ if (par_override) { @@ -1051,8 +1162,10 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) omap2_mcspi_set_enable(spi, 0); - m->status = status; + if (mcspi->fifo_depth > 0 && t) + omap2_mcspi_set_fifo(spi, t, 0); + m->status = status; } static int omap2_mcspi_transfer_one_message(struct spi_master *master, -- cgit v1.2.3 From 74f3aaad21660c91ea13136ea8c41f5183e421fd Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Sat, 22 Jun 2013 23:07:38 +0530 Subject: spi: omap2-mcspi: convert to dma_request_slave_channel_compat() Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports the DT case of platforms requiring channel selection from either the OMAP DMA or the EDMA engine. AM33xx only boots from DT and is the only user implementing EDMA so in the !DT case we can default to the OMAP DMA filter. Signed-off-by: Matt Porter Acked-by: Mark Brown Signed-off-by: Joel A Fernandes Signed-off-by: Sourav Poddar Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 64 +++++++++++++++++++++++++++++-------------- 1 file changed, 44 insertions(+), 20 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 6802806d1f18..bb9afc3f043b 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -109,6 +109,9 @@ struct omap2_mcspi_dma { struct completion dma_tx_completion; struct completion dma_rx_completion; + + char dma_rx_ch_name[14]; + char dma_tx_ch_name[14]; }; /* use PIO for small transfers, avoiding DMA setup/teardown overhead and @@ -936,12 +939,20 @@ static int omap2_mcspi_request_dma(struct spi_device *spi) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); sig = mcspi_dma->dma_rx_sync_dev; - mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + + mcspi_dma->dma_rx = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &sig, &master->dev, + mcspi_dma->dma_rx_ch_name); if (!mcspi_dma->dma_rx) goto no_dma; sig = mcspi_dma->dma_tx_sync_dev; - mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + mcspi_dma->dma_tx = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &sig, &master->dev, + mcspi_dma->dma_tx_ch_name); + if (!mcspi_dma->dma_tx) { dma_release_channel(mcspi_dma->dma_rx); mcspi_dma->dma_rx = NULL; @@ -1374,29 +1385,42 @@ static int omap2_mcspi_probe(struct platform_device *pdev) goto free_master; for (i = 0; i < master->num_chipselect; i++) { - char dma_ch_name[14]; + char *dma_rx_ch_name = mcspi->dma_channels[i].dma_rx_ch_name; + char *dma_tx_ch_name = mcspi->dma_channels[i].dma_tx_ch_name; struct resource *dma_res; - sprintf(dma_ch_name, "rx%d", i); - dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); - if (!dma_res) { - dev_dbg(&pdev->dev, "cannot get DMA RX channel\n"); - status = -ENODEV; - break; - } + sprintf(dma_rx_ch_name, "rx%d", i); + if (!pdev->dev.of_node) { + dma_res = + platform_get_resource_byname(pdev, + IORESOURCE_DMA, + dma_rx_ch_name); + if (!dma_res) { + dev_dbg(&pdev->dev, + "cannot get DMA RX channel\n"); + status = -ENODEV; + break; + } - mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; - sprintf(dma_ch_name, "tx%d", i); - dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); - if (!dma_res) { - dev_dbg(&pdev->dev, "cannot get DMA TX channel\n"); - status = -ENODEV; - break; + mcspi->dma_channels[i].dma_rx_sync_dev = + dma_res->start; } + sprintf(dma_tx_ch_name, "tx%d", i); + if (!pdev->dev.of_node) { + dma_res = + platform_get_resource_byname(pdev, + IORESOURCE_DMA, + dma_tx_ch_name); + if (!dma_res) { + dev_dbg(&pdev->dev, + "cannot get DMA TX channel\n"); + status = -ENODEV; + break; + } - mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start; + mcspi->dma_channels[i].dma_tx_sync_dev = + dma_res->start; + } } if (status < 0) -- cgit v1.2.3