From c3ce15bf2ae5cde3392944ad043b80f123510cde Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 18 Sep 2014 20:08:56 +0300 Subject: spi: dw: introduce support of loopback mode For testing purposes it's good to have a loopback mode enabled. The patch adds necessary bits for that. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index e2f7c5c0f4ba..7064cd008539 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -591,6 +591,9 @@ static int dw_spi_setup(struct spi_device *spi) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); + if (spi->mode & SPI_LOOP) + chip->cr0 |= 1 << SPI_SRL_OFFSET; + if (gpio_is_valid(spi->cs_gpio)) { ret = gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); @@ -652,7 +655,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) goto err_free_master; } - master->mode_bits = SPI_CPOL | SPI_CPHA; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; -- cgit v1.2.3