From f674aacd5005184acf3cf7b851a299573d64fdd6 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Tue, 24 Aug 2021 15:02:12 +0800 Subject: spi: sprd: fill offset only to RD_CMD register for reading from slave device RD_CMD can accept slave address offset only, higher bits are reserved. Writing the whole slave address including slave base seems unnecessary. Signed-off-by: Chunyan Zhang Link: https://lore.kernel.org/r/20210824070212.2089255-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-sprd-adi.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c index 06af519c0b21..07f11b17bf20 100644 --- a/drivers/spi/spi-sprd-adi.c +++ b/drivers/spi/spi-sprd-adi.c @@ -159,7 +159,7 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val) { int read_timeout = ADI_READ_TIMEOUT; unsigned long flags; - u32 val, rd_addr, paddr; + u32 val, rd_addr; int ret = 0; if (sadi->hwlock) { @@ -177,11 +177,10 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val) goto out; /* - * Set the physical register address need to read into RD_CMD register, + * Set the slave address offset need to read into RD_CMD register, * then ADI controller will start to transfer automatically. */ - paddr = sadi->slave_pbase + reg; - writel_relaxed(paddr, sadi->base + REG_ADI_RD_CMD); + writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD); /* * Wait read operation complete, the BIT_RD_CMD_BUSY will be set @@ -211,9 +210,9 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val) */ rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT; - if (rd_addr != (paddr & REG_ADDR_LOW_MASK)) { + if (rd_addr != (reg & REG_ADDR_LOW_MASK)) { dev_err(sadi->dev, "read error, reg addr = 0x%x, val = 0x%x\n", - paddr, val); + reg, val); ret = -EIO; goto out; } -- cgit v1.2.3