From e5eb517dd80e4da3055895f8aa3547c2bfd5e675 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 9 Jul 2015 10:34:34 +0200 Subject: serial/uuc_uart: Support higher bitrates than 115200 Bit/s The maximum bitrate supported depends on the clock rate used in BRG. This is stored in port.uartclk during probe. Respecting the 16x oversampling higher bitrates can be supported. Signed-off-by: Alexander Stein Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ucc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty/serial/ucc_uart.c') diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 7d2532b23969..73190f5d2832 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -950,7 +950,7 @@ static void qe_uart_set_termios(struct uart_port *port, if ((termios->c_cflag & CREAD) == 0) port->read_status_mask &= ~BD_SC_EMPTY; - baud = uart_get_baud_rate(port, termios, old, 0, 115200); + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); /* Do we really need a spinlock here? */ spin_lock_irqsave(&port->lock, flags); -- cgit v1.2.3