From f197b2c54b9d9a133a9a8ff92f35cadf8945ea14 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:42:53 -0700 Subject: [PATCH] OHCI PM updates This simplifies the OHCI root hub suspend logic: - Uses new usbcore root hub calls to make autosuspend work again: * Uses a newish usbcore root hub wakeup mechanism, making requests to khubd not keventd. * Uses an even newer sibling suspend hook. - Expect someone always made usbcore call ohci_hub_suspend() before bus glue fires; and that ohci_hub_resume() is only called after that bus glue ran. Previously, only CONFIG_USB_SUSPEND promised those things. (Includes updates to PCI and OMAP bus glue.) - Handle a not-noticed-before special case during resume from one of the swsusp snapshots when using "usb-handoff": the controller isn't left in RESET state. (A bug to fix in the usb-handoff code...) Also cleans up a minor debug printk glitch, and switches an mdelay over to an msleep (how did that stick around for so long?). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 36 ++++++++++++------------------------ drivers/usb/host/ohci-pci.c | 40 ++++++++-------------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 33 insertions(+), 93 deletions(-) --- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ 1 file changed, 12 insertions(+), 30 deletions(-) (limited to 'drivers/usb/host/ohci-hub.c') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index b96948ea3005..39a60e731ec2 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -73,7 +73,6 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci_dbg (ohci, "suspend root hub\n"); /* First stop any processing */ - hcd->state = HC_STATE_QUIESCING; if (ohci->hc_control & OHCI_SCHED_ENABLES) { int limit; @@ -108,7 +107,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) else ohci->hc_control &= ~OHCI_CTRL_RWE; - /* Suspend hub */ + /* Suspend hub ... this is the "global (to this bus) suspend" mode, + * which doesn't imply ports will first be individually suspended. + */ ohci->hc_control &= ~OHCI_CTRL_HCFS; ohci->hc_control |= OHCI_USB_SUSPEND; ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); @@ -118,8 +119,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci->next_statechange = jiffies + msecs_to_jiffies (5); done: + /* external suspend vs self autosuspend ... same effect */ if (status == 0) - hcd->state = HC_STATE_SUSPENDED; + usb_hcd_suspend_root_hub(hcd); spin_unlock_irqrestore (&ohci->lock, flags); return status; } @@ -146,7 +148,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { - /* this can happen after suspend-to-disk */ + /* this can happen after resuming a swsusp snapshot */ if (hcd->state == HC_STATE_RESUMING) { ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", ohci->hc_control); @@ -169,11 +171,12 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci_info (ohci, "wakeup\n"); break; case OHCI_USB_OPER: - ohci_dbg (ohci, "already resumed\n"); - status = 0; + /* this can happen after resuming a swsusp snapshot */ + ohci_dbg (ohci, "snapshot resume? reinit\n"); + status = -EBUSY; break; default: /* RESET, we lost power */ - ohci_dbg (ohci, "root hub hardware reset\n"); + ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } spin_unlock_irq (&ohci->lock); @@ -198,8 +201,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) } /* Some controllers (lucent erratum) need extra-long delays */ - hcd->state = HC_STATE_RESUMING; - mdelay (20 /* usb 11.5.1.10 */ + 15); + msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); temp = ohci_readl (ohci, &ohci->regs->control); temp &= OHCI_CTRL_HCFS; @@ -273,27 +275,9 @@ static int ohci_hub_resume (struct usb_hcd *hcd) (void) ohci_readl (ohci, &ohci->regs->control); } - hcd->state = HC_STATE_RUNNING; return 0; } -static void ohci_rh_resume (void *_hcd) -{ - struct usb_hcd *hcd = _hcd; - - usb_lock_device (hcd->self.root_hub); - (void) ohci_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -} - -#else - -static void ohci_rh_resume (void *_hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (_hcd); - ohci_dbg(ohci, "rh_resume ??\n"); -} - #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -367,7 +351,6 @@ done: #ifdef CONFIG_PM /* save power by suspending idle root hubs; * INTR_RD wakes us when there's work - * NOTE: if we can do this, we don't need a root hub timer! */ if (can_suspend && !changed @@ -380,7 +363,6 @@ done: ) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_hub_suspend (hcd); - hcd->state = HC_STATE_RUNNING; usb_unlock_device (hcd->self.root_hub); } #endif @@ -554,7 +536,7 @@ static int ohci_hub_control ( temp = RH_PS_POCI; if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER) - schedule_work (&ohci->rh_resume); + usb_hcd_resume_root_hub(hcd); break; case USB_PORT_FEAT_C_SUSPEND: temp = RH_PS_PSSC; -- cgit v1.2.3