From c0f1f8e38fda8e345cad9269c559b4f036378120 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 24 Jun 2010 23:07:09 +0530 Subject: USB: musb: Enable the maximum supported burst mode for DMA Setting MUSB Burst Mode 3 automatically enables support for lower burst modes (BURST4, BURST8, BURST16 or bursts of unspecified length). There is no need to set these burst modes based on the packet size. Also enable the burst mode for both mode1 and mode0. This is a fix for buggy hardware - having the lower burst modes enabled can potentially cause lockups of the DMA engine used in OMAP2/3/4 chips. Signed-off-by: Hema HK Signed-off-by: Anand Gadiyar Signed-off-by: Ajay Kumar Gupta Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musbhsdma.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers/usb/musb') diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 1008044a3bbc..dc66e4376d49 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel, if (mode) { csr |= 1 << MUSB_HSDMA_MODE1_SHIFT; BUG_ON(len < packet_sz); - - if (packet_sz >= 64) { - csr |= MUSB_HSDMA_BURSTMODE_INCR16 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 32) { - csr |= MUSB_HSDMA_BURSTMODE_INCR8 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 16) { - csr |= MUSB_HSDMA_BURSTMODE_INCR4 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } } + csr |= MUSB_HSDMA_BURSTMODE_INCR16 + << MUSB_HSDMA_BURSTMODE_SHIFT; csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT) | (1 << MUSB_HSDMA_ENABLE_SHIFT) -- cgit v1.2.3