From a4f3d55cb0b8e1199e352c30ea9a264cef9c1ae1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 5 Sep 2009 14:09:20 +0100 Subject: backlight: Add WM831x backlight driver The WM831x series of PMICs provide DC-DC boost convertors and current sinks which can be used together to drive LEDs for use as backlights. Expose this functionality via the backlight API. Since when used in this configuration the current sink and boost convertor are very tightly coupled with a multi-stage startup for the current sink which overlaps with the boost convertor startup this driver bypasses the regulator API. Machine inititialisation is responsible for ensuring that the regulators are not accessed via both APIs. Signed-off-by: Mark Brown Signed-off-by: Richard Purdie --- drivers/video/backlight/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/video/backlight/Kconfig') diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index f9d19be05540..f86dbfd209ad 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -229,3 +229,10 @@ config BACKLIGHT_SAHARA help If you have a Tabletkiosk Sahara Touch-iT, say y to enable the backlight driver. + +config BACKLIGHT_WM831X + tristate "WM831x PMIC Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X + help + If you have a backlight driven by the ISINK and DCDC of a + WM831x PMIC say y to enable the backlight driver for it. -- cgit v1.2.3 From 5036cc41e07d6614350e329666ee8a79cea6f793 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 6 Aug 2009 16:07:10 -0700 Subject: backlight: spi driver for LMS283GF05 LCD ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/video/backlight/Kconfig | 7 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/lms283gf05.c | 242 +++++++++++++++++++++++++++++++++++ include/linux/spi/lms283gf05.h | 28 ++++ 4 files changed, 278 insertions(+) create mode 100644 drivers/video/backlight/lms283gf05.c create mode 100644 include/linux/spi/lms283gf05.h (limited to 'drivers/video/backlight/Kconfig') diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index f86dbfd209ad..c0d4a536ea87 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -31,6 +31,13 @@ config LCD_CORGI Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. +config LCD_LMS283GF05 + tristate "Samsung LMS283GF05 LCD" + depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO + help + SPI driver for Samsung LMS283GF05. This provides basic support + for powering the LCD up/down through a sysfs interface. + config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" depends on LCD_CLASS_DEVICE && SPI_MASTER diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index df0b67ce88b6..0abc014215ba 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o +obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c new file mode 100644 index 000000000000..447b542a20ca --- /dev/null +++ b/drivers/video/backlight/lms283gf05.c @@ -0,0 +1,242 @@ +/* + * lms283gf05.c -- support for Samsung LMS283GF05 LCD + * + * Copyright (c) 2009 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +struct lms283gf05_state { + struct spi_device *spi; + struct lcd_device *ld; +}; + +struct lms283gf05_seq { + unsigned char reg; + unsigned short value; + unsigned char delay; +}; + +/* Magic sequences supplied by manufacturer, for details refer to datasheet */ +static struct lms283gf05_seq disp_initseq[] = { + /* REG, VALUE, DELAY */ + { 0x07, 0x0000, 0 }, + { 0x13, 0x0000, 10 }, + + { 0x11, 0x3004, 0 }, + { 0x14, 0x200F, 0 }, + { 0x10, 0x1a20, 0 }, + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0060, 0 }, + { 0x13, 0x0070, 200 }, + + { 0x01, 0x0127, 0 }, + { 0x02, 0x0700, 0 }, + { 0x03, 0x1030, 0 }, + { 0x08, 0x0208, 0 }, + { 0x0B, 0x0620, 0 }, + { 0x0C, 0x0110, 0 }, + { 0x30, 0x0120, 0 }, + { 0x31, 0x0127, 0 }, + { 0x32, 0x0000, 0 }, + { 0x33, 0x0503, 0 }, + { 0x34, 0x0727, 0 }, + { 0x35, 0x0124, 0 }, + { 0x36, 0x0706, 0 }, + { 0x37, 0x0701, 0 }, + { 0x38, 0x0F00, 0 }, + { 0x39, 0x0F00, 0 }, + { 0x40, 0x0000, 0 }, + { 0x41, 0x0000, 0 }, + { 0x42, 0x013f, 0 }, + { 0x43, 0x0000, 0 }, + { 0x44, 0x013f, 0 }, + { 0x45, 0x0000, 0 }, + { 0x46, 0xef00, 0 }, + { 0x47, 0x013f, 0 }, + { 0x48, 0x0000, 0 }, + { 0x07, 0x0015, 30 }, + + { 0x07, 0x0017, 0 }, + + { 0x20, 0x0000, 0 }, + { 0x21, 0x0000, 0 }, + { 0x22, 0x0000, 0 } +}; + +static struct lms283gf05_seq disp_pdwnseq[] = { + { 0x07, 0x0016, 30 }, + + { 0x07, 0x0004, 0 }, + { 0x10, 0x0220, 20 }, + + { 0x13, 0x0060, 50 }, + + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0000, 0 }, + { 0x10, 0x0000, 0 } +}; + + +static void lms283gf05_reset(unsigned long gpio, bool inverted) +{ + gpio_set_value(gpio, !inverted); + mdelay(100); + gpio_set_value(gpio, inverted); + mdelay(20); + gpio_set_value(gpio, !inverted); + mdelay(20); +} + +static void lms283gf05_toggle(struct spi_device *spi, + struct lms283gf05_seq *seq, int sz) +{ + char buf[3]; + int i; + + for (i = 0; i < sz; i++) { + buf[0] = 0x74; + buf[1] = 0x00; + buf[2] = seq[i].reg; + spi_write(spi, buf, 3); + + buf[0] = 0x76; + buf[1] = seq[i].value >> 8; + buf[2] = seq[i].value & 0xff; + spi_write(spi, buf, 3); + + mdelay(seq[i].delay); + } +} + +static int lms283gf05_power_set(struct lcd_device *ld, int power) +{ + struct lms283gf05_state *st = lcd_get_data(ld); + struct spi_device *spi = st->spi; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + + if (power) { + if (pdata) + lms283gf05_reset(pdata->reset_gpio, + pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + } else { + lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq)); + if (pdata) + gpio_set_value(pdata->reset_gpio, + pdata->reset_inverted); + } + + return 0; +} + +static struct lcd_ops lms_ops = { + .set_power = lms283gf05_power_set, + .get_power = NULL, +}; + +static int __devinit lms283gf05_probe(struct spi_device *spi) +{ + struct lms283gf05_state *st; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + struct lcd_device *ld; + int ret = 0; + + if (pdata != NULL) { + ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET"); + if (ret) + return ret; + + ret = gpio_direction_output(pdata->reset_gpio, + !pdata->reset_inverted); + if (ret) + goto err; + } + + st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL); + if (st == NULL) { + dev_err(&spi->dev, "No memory for device state\n"); + ret = -ENOMEM; + goto err; + } + + ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops); + if (IS_ERR(ld)) { + ret = PTR_ERR(ld); + goto err2; + } + + st->spi = spi; + st->ld = ld; + + dev_set_drvdata(&spi->dev, st); + + /* kick in the LCD */ + if (pdata) + lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + + return 0; + +err2: + kfree(st); +err: + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + return ret; +} + +static int __devexit lms283gf05_remove(struct spi_device *spi) +{ + struct lms283gf05_state *st = dev_get_drvdata(&spi->dev); + struct lms283gf05_pdata *pdata = st->spi->dev.platform_data; + + lcd_device_unregister(st->ld); + + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + kfree(st); + + return 0; +} + +static struct spi_driver lms283gf05_driver = { + .driver = { + .name = "lms283gf05", + .owner = THIS_MODULE, + }, + .probe = lms283gf05_probe, + .remove = __devexit_p(lms283gf05_remove), +}; + +static __init int lms283gf05_init(void) +{ + return spi_register_driver(&lms283gf05_driver); +} + +static __exit void lms283gf05_exit(void) +{ + spi_unregister_driver(&lms283gf05_driver); +} + +module_init(lms283gf05_init); +module_exit(lms283gf05_exit); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("LCD283GF05 LCD"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h new file mode 100644 index 000000000000..555d254e6606 --- /dev/null +++ b/include/linux/spi/lms283gf05.h @@ -0,0 +1,28 @@ +/* + * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD + * + * Copyright (C) 2009 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_ +#define _INCLUDE_LINUX_SPI_LMS283GF05_H_ + +struct lms283gf05_pdata { + unsigned long reset_gpio; + bool reset_inverted; +}; + +#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */ -- cgit v1.2.3 From 3b96ea9ef837c010f2187e0618d823fbdd8eeb54 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 14 Aug 2009 15:58:56 +0200 Subject: backlight: Add support for the Avionic Design Xanthos backlight device. This patch adds support for the backlight device found on Avionic Design Xanthos-based boards. Signed-off-by: Thierry Reding Signed-off-by: Richard Purdie --- drivers/video/backlight/Kconfig | 8 ++ drivers/video/backlight/Makefile | 2 +- drivers/video/backlight/adx_bl.c | 178 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 187 insertions(+), 1 deletion(-) create mode 100644 drivers/video/backlight/adx_bl.c (limited to 'drivers/video/backlight/Kconfig') diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c0d4a536ea87..22a49944d98d 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -243,3 +243,11 @@ config BACKLIGHT_WM831X help If you have a backlight driven by the ISINK and DCDC of a WM831x PMIC say y to enable the backlight driver for it. + +config BACKLIGHT_ADX + tristate "Avionic Design Xanthos Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX + default y + help + Say Y to enable the backlight driver on Avionic Design Xanthos-based + boards. diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 0abc014215ba..a483709205ac 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -26,4 +26,4 @@ obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o - +obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c new file mode 100644 index 000000000000..2c3bdfc620b7 --- /dev/null +++ b/drivers/video/backlight/adx_bl.c @@ -0,0 +1,178 @@ +/* + * linux/drivers/video/backlight/adx.c + * + * Copyright (C) 2009 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Written by Thierry Reding + */ + +#include +#include +#include +#include +#include + +/* register definitions */ +#define ADX_BACKLIGHT_CONTROL 0x00 +#define ADX_BACKLIGHT_CONTROL_ENABLE (1 << 0) +#define ADX_BACKLIGHT_BRIGHTNESS 0x08 +#define ADX_BACKLIGHT_STATUS 0x10 +#define ADX_BACKLIGHT_ERROR 0x18 + +struct adxbl { + void __iomem *base; +}; + +static int adx_backlight_update_status(struct backlight_device *bldev) +{ + struct adxbl *bl = bl_get_data(bldev); + u32 value; + + value = bldev->props.brightness; + writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS); + + value = readl(bl->base + ADX_BACKLIGHT_CONTROL); + + if (bldev->props.state & BL_CORE_FBBLANK) + value &= ~ADX_BACKLIGHT_CONTROL_ENABLE; + else + value |= ADX_BACKLIGHT_CONTROL_ENABLE; + + writel(value, bl->base + ADX_BACKLIGHT_CONTROL); + + return 0; +} + +static int adx_backlight_get_brightness(struct backlight_device *bldev) +{ + struct adxbl *bl = bl_get_data(bldev); + u32 brightness; + + brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS); + return brightness & 0xff; +} + +static int adx_backlight_check_fb(struct fb_info *fb) +{ + return 1; +} + +static struct backlight_ops adx_backlight_ops = { + .options = 0, + .update_status = adx_backlight_update_status, + .get_brightness = adx_backlight_get_brightness, + .check_fb = adx_backlight_check_fb, +}; + +static int __devinit adx_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bldev; + struct resource *res; + struct adxbl *bl; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENXIO; + goto out; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), res->name); + if (!res) { + ret = -ENXIO; + goto out; + } + + bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL); + if (!bl) { + ret = -ENOMEM; + goto out; + } + + bl->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!bl->base) { + ret = -ENXIO; + goto out; + } + + bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl, + &adx_backlight_ops); + if (!bldev) { + ret = -ENOMEM; + goto out; + } + + bldev->props.max_brightness = 0xff; + bldev->props.brightness = 0xff; + bldev->props.power = FB_BLANK_UNBLANK; + + platform_set_drvdata(pdev, bldev); + +out: + return ret; +} + +static int __devexit adx_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bldev; + int ret = 0; + + bldev = platform_get_drvdata(pdev); + bldev->props.power = FB_BLANK_UNBLANK; + bldev->props.brightness = 0xff; + backlight_update_status(bldev); + backlight_device_unregister(bldev); + platform_set_drvdata(pdev, NULL); + + return ret; +} + +#ifdef CONFIG_PM +static int adx_backlight_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return 0; +} + +static int adx_backlight_resume(struct platform_device *pdev) +{ + return 0; +} +#else +#define adx_backlight_suspend NULL +#define adx_backlight_resume NULL +#endif + +static struct platform_driver adx_backlight_driver = { + .probe = adx_backlight_probe, + .remove = __devexit_p(adx_backlight_remove), + .suspend = adx_backlight_suspend, + .resume = adx_backlight_resume, + .driver = { + .name = "adx-backlight", + .owner = THIS_MODULE, + }, +}; + +static int __init adx_backlight_init(void) +{ + return platform_driver_register(&adx_backlight_driver); +} + +static void __exit adx_backlight_exit(void) +{ + platform_driver_unregister(&adx_backlight_driver); +} + +module_init(adx_backlight_init); +module_exit(adx_backlight_exit); + +MODULE_AUTHOR("Thierry Reding "); +MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From a7998cecf5073e0755feeb7fd50b2bdc08dea6bd Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 17 Sep 2009 14:29:52 -0400 Subject: backlight: new driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Richard Purdie --- drivers/video/backlight/Kconfig | 11 + drivers/video/backlight/Makefile | 2 + drivers/video/backlight/adp5520_bl.c | 377 +++++++++++++++++++++++++++++++++++ 3 files changed, 390 insertions(+) create mode 100644 drivers/video/backlight/adp5520_bl.c (limited to 'drivers/video/backlight/Kconfig') diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 22a49944d98d..8b3bc71ddb04 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -251,3 +251,14 @@ config BACKLIGHT_ADX help Say Y to enable the backlight driver on Avionic Design Xanthos-based boards. + +config BACKLIGHT_ADP5520 + tristate "Backlight Driver for ADP5520/ADP5501 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520 + help + If you have a LCD backlight connected to the BST/BL_SNK output of + ADP5520 or ADP5501, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp5520_bl. + diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index a483709205ac..9a405548874c 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -27,3 +27,5 @@ obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o +obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o + diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c new file mode 100644 index 000000000000..ad05da5ba3c7 --- /dev/null +++ b/drivers/video/backlight/adp5520_bl.c @@ -0,0 +1,377 @@ +/* + * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include + +struct adp5520_bl { + struct device *master; + struct adp5520_backlight_platfrom_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int current_brightness; +}; + +static int adp5520_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret |= adp5520_clr_bits(master, BL_CONTROL, + BL_AUTO_ADJ); + ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l3 sysfs brightness + */ + ret |= adp5520_write(master, DAYLIGHT_MAX, + data->cached_daylight_max); + ret |= adp5520_set_bits(master, BL_CONTROL, + BL_AUTO_ADJ); + } + } else { + ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + } + + if (data->current_brightness && brightness == 0) + ret |= adp5520_set_bits(master, + MODE_STATUS, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret |= adp5520_clr_bits(master, + MODE_STATUS, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp5520_bl_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return adp5520_bl_set(bl, brightness); +} + +static int adp5520_bl_get_brightness(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + int error; + uint8_t reg_val; + + error = adp5520_read(data->master, BL_VALUE, ®_val); + + return error ? data->current_brightness : reg_val; +} + +static struct backlight_ops adp5520_bl_ops = { + .update_status = adp5520_bl_update_status, + .get_brightness = adp5520_bl_get_brightness, +}; + +static int adp5520_bl_setup(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + struct adp5520_backlight_platfrom_data *pdata = data->pdata; + int ret = 0; + + ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max); + ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim); + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max); + ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim); + ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max); + ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim); + ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip); + ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst); + ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip); + ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst); + ret |= adp5520_write(master, ALS_CMPR_CFG, + ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN)); + } + + ret |= adp5520_write(master, BL_CONTROL, + BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens)); + + ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN); + + return ret; +} + +static ssize_t adp5520_show(struct device *dev, char *buf, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp5520_read(data->master, reg, ®_val); + mutex_unlock(&data->lock); + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp5520_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp5520_write(data->master, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp5520_bl_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DARK_MAX); +} + +static ssize_t adp5520_bl_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DARK_MAX); +} +static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show, + adp5520_bl_dark_max_store); + +static ssize_t adp5520_bl_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, OFFICE_MAX); +} + +static ssize_t adp5520_bl_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, OFFICE_MAX); +} +static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show, + adp5520_bl_office_max_store); + +static ssize_t adp5520_bl_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DAYLIGHT_MAX); +} + +static ssize_t adp5520_bl_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + + strict_strtoul(buf, 10, &data->cached_daylight_max); + return adp5520_store(dev, buf, count, DAYLIGHT_MAX); +} +static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show, + adp5520_bl_daylight_max_store); + +static ssize_t adp5520_bl_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DARK_DIM); +} + +static ssize_t adp5520_bl_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DARK_DIM); +} +static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show, + adp5520_bl_dark_dim_store); + +static ssize_t adp5520_bl_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, OFFICE_DIM); +} + +static ssize_t adp5520_bl_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, OFFICE_DIM); +} +static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show, + adp5520_bl_office_dim_store); + +static ssize_t adp5520_bl_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DAYLIGHT_DIM); +} + +static ssize_t adp5520_bl_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DAYLIGHT_DIM); +} +static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show, + adp5520_bl_daylight_dim_store); + +static struct attribute *adp5520_bl_attributes[] = { + &dev_attr_dark_max.attr, + &dev_attr_dark_dim.attr, + &dev_attr_office_max.attr, + &dev_attr_office_dim.attr, + &dev_attr_daylight_max.attr, + &dev_attr_daylight_dim.attr, + NULL +}; + +static const struct attribute_group adp5520_bl_attr_group = { + .attrs = adp5520_bl_attributes, +}; + +static int __devinit adp5520_bl_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct adp5520_bl *data; + int ret = 0; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->master = pdev->dev.parent; + data->pdata = pdev->dev.platform_data; + + if (data->pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + kfree(data); + return -ENODEV; + } + + data->id = pdev->id; + data->current_brightness = 0; + + mutex_init(&data->lock); + + bl = backlight_device_register(pdev->name, data->master, + data, &adp5520_bl_ops); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); + return PTR_ERR(bl); + } + + bl->props.max_brightness = + bl->props.brightness = ADP5020_MAX_BRIGHTNESS; + + if (data->pdata->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + + if (ret) { + dev_err(&pdev->dev, "failed to register sysfs\n"); + backlight_device_unregister(bl); + kfree(data); + } + + platform_set_drvdata(pdev, bl); + ret |= adp5520_bl_setup(bl); + backlight_update_status(bl); + + return ret; +} + +static int __devexit adp5520_bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct adp5520_bl *data = bl_get_data(bl); + + adp5520_clr_bits(data->master, MODE_STATUS, BL_EN); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + + backlight_device_unregister(bl); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5520_bl_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + return adp5520_bl_set(bl, 0); +} + +static int adp5520_bl_resume(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + + backlight_update_status(bl); + return 0; +} +#else +#define adp5520_bl_suspend NULL +#define adp5520_bl_resume NULL +#endif + +static struct platform_driver adp5520_bl_driver = { + .driver = { + .name = "adp5520-backlight", + .owner = THIS_MODULE, + }, + .probe = adp5520_bl_probe, + .remove = __devexit_p(adp5520_bl_remove), + .suspend = adp5520_bl_suspend, + .resume = adp5520_bl_resume, +}; + +static int __init adp5520_bl_init(void) +{ + return platform_driver_register(&adp5520_bl_driver); +} +module_init(adp5520_bl_init); + +static void __exit adp5520_bl_exit(void) +{ + platform_driver_unregister(&adp5520_bl_driver); +} +module_exit(adp5520_bl_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("ADP5520(01) Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-backlight"); -- cgit v1.2.3