From a247ce78ca3fa041f3e6b1187c4ae96c7016e83a Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Fri, 10 Feb 2012 11:45:52 +0530 Subject: OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/hdmi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index d7aa3b056529..a36b934b2db4 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -165,9 +165,25 @@ static int hdmi_runtime_get(void) DSSDBG("hdmi_runtime_get\n"); + /* + * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled. + * This should be removed later. + */ + r = dss_runtime_get(); + if (r < 0) + goto err_get_dss; + r = pm_runtime_get_sync(&hdmi.pdev->dev); WARN_ON(r < 0); - return r < 0 ? r : 0; + if (r < 0) + goto err_get_hdmi; + + return 0; + +err_get_hdmi: + dss_runtime_put(); +err_get_dss: + return r; } static void hdmi_runtime_put(void) @@ -178,6 +194,12 @@ static void hdmi_runtime_put(void) r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); + + /* + * HACK: This is added to complement the dss_runtime_get() call in + * hdmi_runtime_get(). This should be removed later. + */ + dss_runtime_put(); } int hdmi_init_display(struct omap_dss_device *dssdev) -- cgit v1.2.3 From ca888a7958b3d808e4efd08ceff88913f4212c69 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 20 Feb 2012 15:03:36 -0600 Subject: OMAPDSS: HDMI: hot plug detect fix The "OMAPDSS: HDMI: PHY burnout fix" commit switched the HDMI driver over to using a GPIO for plug detect. Unfortunately the ->detect() method was not also updated, causing HDMI to no longer work for the omapdrm driver (because it would actually check if a connection was detected before attempting to enable display). Signed-off-by: Rob Clark Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 2d72334ca3da..6847a478b459 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -479,14 +479,7 @@ int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data, bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data) { - int r; - - void __iomem *base = hdmi_core_sys_base(ip_data); - - /* HPD */ - r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1); - - return r == 1; + return gpio_get_value(ip_data->hpd_gpio); } static void hdmi_core_init(struct hdmi_core_video_config *video_cfg, -- cgit v1.2.3