From 81fc933f176cd95f757bfc8a98109ef422598b79 Mon Sep 17 00:00:00 2001 From: Takahisa Tanaka Date: Sun, 3 Mar 2013 14:48:00 +0900 Subject: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current sp5100_tco driver is using bit 2. See 2.3.3 Power Management (PM) Registers page 150 of the AMD SB800-Series Southbridges Register Reference Guide [1]. AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h] Field Name Bits Default Description AcpiMMioDecodeEn 0 0b Set to 1 to enable AcpiMMio space. AcpiMMIoSel 1 0b Set AcpiMMio registers to be memory-mapped or IO-mapped space. 0: Memory-mapped space 1: I/O-mapped space The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1). Fortunately, no problems were caused by this typo, because the default value of the undocumented misused bit 2 seems to be zero. However, the sp5100_tco driver should use the correct bitmask value. [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdf Signed-off-by: Takahisa Tanaka Signed-off-by: Paul Menzel Signed-off-by: Wim Van Sebroeck Cc: stable --- drivers/watchdog/sp5100_tco.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/watchdog/sp5100_tco.h') diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h index 71594a0c14b7..2b28c00da0df 100644 --- a/drivers/watchdog/sp5100_tco.h +++ b/drivers/watchdog/sp5100_tco.h @@ -57,7 +57,7 @@ #define SB800_PM_WATCHDOG_DISABLE (1 << 2) #define SB800_PM_WATCHDOG_SECOND_RES (3 << 0) #define SB800_ACPI_MMIO_DECODE_EN (1 << 0) -#define SB800_ACPI_MMIO_SEL (1 << 2) +#define SB800_ACPI_MMIO_SEL (1 << 1) #define SB800_PM_WDT_MMIO_OFFSET 0xB00 -- cgit v1.2.3