From 02d742f4b209057710ed54f14f24861d94c2cd99 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 28 Dec 2017 14:58:26 -0500 Subject: media: lirc: lirc daemon fails to detect raw IR device Since commit 9b6192589be7 ("media: lirc: implement scancode sending"), and commit de142c324106 ("media: lirc: implement reading scancode") the lirc features ioctl for raw IR devices advertises two modes for sending and receiving. The lirc daemon now fails to detect a raw IR device, both for transmit and receive. To fix this, do not advertise the scancode mode in the lirc features for raw IR devices (however do keep it for scancode devices). The mode can still be used via the LIRC_SET_{REC,SEND}_MODE ioctl. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/lirc_dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index 13ef0475d901..6ef5b24eb1d8 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -403,13 +403,13 @@ static long ir_lirc_ioctl(struct file *file, unsigned int cmd, val |= LIRC_CAN_REC_SCANCODE; if (dev->driver_type == RC_DRIVER_IR_RAW) { - val |= LIRC_CAN_REC_MODE2 | LIRC_CAN_REC_SCANCODE; + val |= LIRC_CAN_REC_MODE2; if (dev->rx_resolution) val |= LIRC_CAN_GET_REC_RESOLUTION; } if (dev->tx_ir) { - val |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE; + val |= LIRC_CAN_SEND_PULSE; if (dev->s_tx_mask) val |= LIRC_CAN_SET_TRANSMITTER_MASK; if (dev->s_tx_carrier) -- cgit v1.2.3