From 045d705dc1fba0d881fe22ad76ebe1b44647cdac Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Wed, 12 Feb 2020 12:12:57 +0800 Subject: mmc: core: Enable the MMC host software queue for the SD card Enable the MMC host software queue for the SD card if the host controller supports the MMC host software queue. On my Spreadtrum platform, I did not see any obvious performance changes in 4K block size when changing to use hsq for the SD cards, I think the reason is the SD card works at a low speed on my platform, and most of time is spent in the hardware. But we can see some obvious improvements when enabling the packed request based on hsq, that's why we still add hsq support for the SD cards. Signed-off-by: Baolin Wang Signed-off-by: Baolin Wang Link: https://lore.kernel.org/r/0065b4631fef2d61c3b89d14a4ea4f2b7499ea56.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson --- drivers/mmc/core/sd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index fe914ff5f5d6..76c7add367d5 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1082,6 +1082,16 @@ retry: } } + if (host->cqe_ops && !host->cqe_enabled) { + err = host->cqe_ops->cqe_enable(host, card); + if (!err) { + host->cqe_enabled = true; + host->hsq_enabled = true; + pr_info("%s: Host Software Queue enabled\n", + mmc_hostname(host)); + } + } + if (host->caps2 & MMC_CAP2_AVOID_3_3V && host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) { pr_err("%s: Host failed to negotiate down from 3.3V\n", -- cgit v1.2.3