From 147830f297f369fa8731a75e3e4c7c7cd5c3e868 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 19:54:52 -0500
Subject: sbp2: prevent unloading of 1394 low-level driver

When a new SBP-2 unit is added, sbp2 now takes a reference on the 1394
low-level driver (ohci1394 or pcilynx).  This prevents the 1394 host driver
module from being unloaded, e.g. by an administrative routine cleanup of
unused kernel modules or when another 1394 driver which depends on ohci1394
is unloaded.

The reference is dropped when the SBP-2 unit was disconnected, when sbp2 is
unloaded or detached from the unit, or when addition of the SBP-2 unit failed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/sbp2.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers')

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index eca92eb475a1..0b2b0da5b883 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -755,6 +755,12 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 #endif
 	}
 
+	/* Prevent unloading of the 1394 host */
+	if (!try_module_get(hi->host->driver->owner)) {
+		SBP2_ERR("failed to get a reference on 1394 host driver");
+		goto failed_alloc;
+	}
+
 	scsi_id->hi = hi;
 
 	list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
@@ -1015,6 +1021,9 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
 
 	scsi_id->ud->device.driver_data = NULL;
 
+	if (hi)
+		module_put(hi->host->driver->owner);
+
 	SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
 
 	kfree(scsi_id);
-- 
cgit v1.2.3


From e2f8165dc3c70cd74bcf2c63a6c0de254c6ff50c Mon Sep 17 00:00:00 2001
From: Jody McIntyre
Date: Tue, 28 Mar 2006 19:55:11 -0500
Subject: Signed-off-by: Jody McIntyre <scjody@modernduck.com>

---
 drivers/ieee1394/ohci1394.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index b6b96fa04d62..eb329a875099 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -572,6 +572,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 		  OHCI1394_reqTxComplete |
 		  OHCI1394_isochRx |
 		  OHCI1394_isochTx |
+		  OHCI1394_postedWriteErr |
 		  OHCI1394_cycleInconsistent);
 
 	/* Enable link */
@@ -2374,7 +2375,10 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
 
 		event &= ~OHCI1394_unrecoverableError;
 	}
-
+	if (event & OHCI1394_postedWriteErr) {
+		PRINT(KERN_ERR, "physical posted write error");
+		/* no recovery strategy yet, had to involve protocol drivers */
+	}
 	if (event & OHCI1394_cycleInconsistent) {
 		/* We subscribe to the cycleInconsistent event only to
 		 * clear the corresponding event bit... otherwise,
@@ -2382,7 +2386,6 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
 		DBGMSG("OHCI1394_cycleInconsistent");
 		event &= ~OHCI1394_cycleInconsistent;
 	}
-
 	if (event & OHCI1394_busReset) {
 		/* The busReset event bit can't be cleared during the
 		 * selfID phase, so we disable busReset interrupts, to
@@ -2426,7 +2429,6 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
 		}
 		event &= ~OHCI1394_busReset;
 	}
-
 	if (event & OHCI1394_reqTxComplete) {
 		struct dma_trm_ctx *d = &ohci->at_req_context;
 		DBGMSG("Got reqTxComplete interrupt "
-- 
cgit v1.2.3


From a8748445e5ff747b114b5c29461ba2d28af404e8 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 19:55:41 -0500
Subject: ieee1394: remove devfs support

Devfs has been disabled in the last kernel releases, so let's
remove it from ieee1394core, raw1394, video1394, dv1394.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/dv1394.c        | 41 ++--------------------------------------
 drivers/ieee1394/ieee1394_core.c | 14 ++------------
 drivers/ieee1394/ieee1394_core.h |  1 -
 drivers/ieee1394/raw1394.c       |  6 ------
 drivers/ieee1394/video1394.c     | 16 +---------------
 5 files changed, 5 insertions(+), 73 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index efeaa944bd0a..85c2d4ca0def 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -73,7 +73,7 @@
   - fix all XXX showstoppers
   - disable IR/IT DMA interrupts on shutdown
   - flush pci writes to the card by issuing a read
-  - devfs and character device dispatching (* needs testing with Linux 2.2.x)
+  - character device dispatching
   - switch over to the new kernel DMA API (pci_map_*()) (* needs testing on platforms with IOMMU!)
   - keep all video_cards in a list (for open() via chardev), set file->private_data = video
   - dv1394_poll should indicate POLLIN when receiving buffers are available
@@ -1096,7 +1096,6 @@ static int do_dv1394_init_default(struct video_card *video)
 
 	init.api_version = DV1394_API_VERSION;
 	init.n_frames = DV1394_MAX_FRAMES / 4;
-	/* the following are now set via devfs */
 	init.channel = video->channel;
 	init.format = video->pal_or_ntsc;
 	init.cip_n = video->cip_n;
@@ -1791,8 +1790,6 @@ static int dv1394_open(struct inode *inode, struct file *file)
 {
 	struct video_card *video = NULL;
 
-	/* if the device was opened through devfs, then file->private_data
-	   has already been set to video by devfs */
 	if (file->private_data) {
 		video = (struct video_card*) file->private_data;
 
@@ -2211,7 +2208,7 @@ static int dv1394_init(struct ti_ohci *ohci, enum pal_or_ntsc format, enum modes
 	video = kzalloc(sizeof(*video), GFP_KERNEL);
 	if (!video) {
 		printk(KERN_ERR "dv1394: cannot allocate video_card\n");
-		goto err;
+		return -1;
 	}
 
 	video->ohci = ohci;
@@ -2266,37 +2263,14 @@ static int dv1394_init(struct ti_ohci *ohci, enum pal_or_ntsc format, enum modes
 	list_add_tail(&video->list, &dv1394_cards);
 	spin_unlock_irqrestore(&dv1394_cards_lock, flags);
 
-	if (devfs_mk_cdev(MKDEV(IEEE1394_MAJOR,
-				IEEE1394_MINOR_BLOCK_DV1394*16 + video->id),
-			S_IFCHR|S_IRUGO|S_IWUGO,
-			 "ieee1394/dv/host%d/%s/%s",
-			 (video->id>>2),
-			 (video->pal_or_ntsc == DV1394_NTSC ? "NTSC" : "PAL"),
-			 (video->mode == MODE_RECEIVE ? "in" : "out")) < 0)
-			goto err_free;
-
 	debug_printk("dv1394: dv1394_init() OK on ID %d\n", video->id);
-
 	return 0;
-
- err_free:
-	kfree(video);
- err:
-	return -1;
 }
 
 static void dv1394_un_init(struct video_card *video)
 {
-	char buf[32];
-
 	/* obviously nobody has the driver open at this point */
 	do_dv1394_shutdown(video, 1);
-	snprintf(buf, sizeof(buf), "dv/host%d/%s/%s", (video->id >> 2),
-		(video->pal_or_ntsc == DV1394_NTSC ? "NTSC" : "PAL"),
-		(video->mode == MODE_RECEIVE ? "in" : "out")
-		);
-
-	devfs_remove("ieee1394/%s", buf);
 	kfree(video);
 }
 
@@ -2333,9 +2307,6 @@ static void dv1394_remove_host (struct hpsb_host *host)
 
 	class_device_destroy(hpsb_protocol_class,
 		MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)));
-	devfs_remove("ieee1394/dv/host%d/NTSC", id);
-	devfs_remove("ieee1394/dv/host%d/PAL", id);
-	devfs_remove("ieee1394/dv/host%d", id);
 }
 
 static void dv1394_add_host (struct hpsb_host *host)
@@ -2352,9 +2323,6 @@ static void dv1394_add_host (struct hpsb_host *host)
 	class_device_create(hpsb_protocol_class, NULL, MKDEV(
 		IEEE1394_MAJOR,	IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), 
 		NULL, "dv1394-%d", id);
-	devfs_mk_dir("ieee1394/dv/host%d", id);
-	devfs_mk_dir("ieee1394/dv/host%d/NTSC", id);
-	devfs_mk_dir("ieee1394/dv/host%d/PAL", id);
 
 	dv1394_init(ohci, DV1394_NTSC, MODE_RECEIVE);
 	dv1394_init(ohci, DV1394_NTSC, MODE_TRANSMIT);
@@ -2611,10 +2579,8 @@ MODULE_LICENSE("GPL");
 static void __exit dv1394_exit_module(void)
 {
 	hpsb_unregister_protocol(&dv1394_driver);
-
 	hpsb_unregister_highlevel(&dv1394_highlevel);
 	cdev_del(&dv1394_cdev);
-	devfs_remove("ieee1394/dv");
 }
 
 static int __init dv1394_init_module(void)
@@ -2630,15 +2596,12 @@ static int __init dv1394_init_module(void)
 		return ret;
 	}
 
-	devfs_mk_dir("ieee1394/dv");
-
 	hpsb_register_highlevel(&dv1394_highlevel);
 
 	ret = hpsb_register_protocol(&dv1394_driver);
 	if (ret) {
 		printk(KERN_ERR "dv1394: failed to register protocol\n");
 		hpsb_unregister_highlevel(&dv1394_highlevel);
-		devfs_remove("ieee1394/dv");
 		cdev_del(&dv1394_cdev);
 		return ret;
 	}
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 25ef5a86f5f0..c0acaafe82d4 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -1078,17 +1078,10 @@ static int __init ieee1394_init(void)
 		goto exit_release_kernel_thread;
 	}
 
-	/* actually this is a non-fatal error */
-	ret = devfs_mk_dir("ieee1394");
-	if (ret < 0) {
-		HPSB_ERR("unable to make devfs dir for device major %d!\n", IEEE1394_MAJOR);
-		goto release_chrdev;
-	}
-
 	ret = bus_register(&ieee1394_bus_type);
 	if (ret < 0) {
 		HPSB_INFO("bus register failed");
-		goto release_devfs;
+		goto release_chrdev;
 	}
 
 	for (i = 0; fw_bus_attrs[i]; i++) {
@@ -1099,7 +1092,7 @@ static int __init ieee1394_init(void)
 						fw_bus_attrs[i--]);
 			}
 			bus_unregister(&ieee1394_bus_type);
-			goto release_devfs;
+			goto release_chrdev;
 		}
 	}
 
@@ -1152,8 +1145,6 @@ release_all_bus:
 	for (i = 0; fw_bus_attrs[i]; i++)
 		bus_remove_file(&ieee1394_bus_type, fw_bus_attrs[i]);
 	bus_unregister(&ieee1394_bus_type);
-release_devfs:
-	devfs_remove("ieee1394");
 release_chrdev:
 	unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
 exit_release_kernel_thread:
@@ -1191,7 +1182,6 @@ static void __exit ieee1394_cleanup(void)
 	hpsb_cleanup_config_roms();
 
 	unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
-	devfs_remove("ieee1394");
 }
 
 module_init(ieee1394_init);
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index b35466023f00..50c69c767b5d 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -3,7 +3,6 @@
 #define _IEEE1394_CORE_H
 
 #include <linux/slab.h>
-#include <linux/devfs_fs_kernel.h>
 #include <asm/atomic.h>
 #include <asm/semaphore.h>
 #include "hosts.h"
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 19f26c5c9479..f7de546f2ed6 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -41,7 +41,6 @@
 #include <linux/cdev.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
-#include <linux/devfs_fs_kernel.h>
 #include <linux/compat.h>
 
 #include "csr1212.h"
@@ -2999,9 +2998,6 @@ static int __init init_raw1394(void)
 		goto out_unreg;
 	}
 
-	devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16),
-		      S_IFCHR | S_IRUSR | S_IWUSR, RAW1394_DEVICE_NAME);
-
 	cdev_init(&raw1394_cdev, &raw1394_fops);
 	raw1394_cdev.owner = THIS_MODULE;
 	kobject_set_name(&raw1394_cdev.kobj, RAW1394_DEVICE_NAME);
@@ -3023,7 +3019,6 @@ static int __init init_raw1394(void)
 	goto out;
 
       out_dev:
-	devfs_remove(RAW1394_DEVICE_NAME);
 	class_device_destroy(hpsb_protocol_class,
 			     MKDEV(IEEE1394_MAJOR,
 				   IEEE1394_MINOR_BLOCK_RAW1394 * 16));
@@ -3039,7 +3034,6 @@ static void __exit cleanup_raw1394(void)
 			     MKDEV(IEEE1394_MAJOR,
 				   IEEE1394_MINOR_BLOCK_RAW1394 * 16));
 	cdev_del(&raw1394_cdev);
-	devfs_remove(RAW1394_DEVICE_NAME);
 	hpsb_unregister_highlevel(&raw1394_highlevel);
 	hpsb_unregister_protocol(&raw1394_driver);
 }
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 216dbbf1dc8e..4e3bd62c458d 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -42,7 +42,6 @@
 #include <linux/poll.h>
 #include <linux/smp_lock.h>
 #include <linux/delay.h>
-#include <linux/devfs_fs_kernel.h>
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
@@ -1322,9 +1321,6 @@ static void video1394_add_host (struct hpsb_host *host)
 	class_device_create(hpsb_protocol_class, NULL, MKDEV(
 		IEEE1394_MAJOR,	minor), 
 		NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
-	devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor),
-		       S_IFCHR | S_IRUSR | S_IWUSR,
-		       "%s/%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
 }
 
 
@@ -1332,12 +1328,9 @@ static void video1394_remove_host (struct hpsb_host *host)
 {
 	struct ti_ohci *ohci = hpsb_get_hostinfo(&video1394_highlevel, host);
 
-	if (ohci) {
+	if (ohci)
 		class_device_destroy(hpsb_protocol_class, MKDEV(IEEE1394_MAJOR,
 			IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id));
-		devfs_remove("%s/%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
-	}
-	
 	return;
 }
 
@@ -1478,12 +1471,8 @@ static long video1394_compat_ioctl(struct file *f, unsigned cmd, unsigned long a
 static void __exit video1394_exit_module (void)
 {
 	hpsb_unregister_protocol(&video1394_driver);
-
 	hpsb_unregister_highlevel(&video1394_highlevel);
-
-	devfs_remove(VIDEO1394_DRIVER_NAME);
 	cdev_del(&video1394_cdev);
-
 	PRINT_G(KERN_INFO, "Removed " VIDEO1394_DRIVER_NAME " module");
 }
 
@@ -1500,15 +1489,12 @@ static int __init video1394_init_module (void)
 		return ret;
         }
 
-	devfs_mk_dir(VIDEO1394_DRIVER_NAME);
-
 	hpsb_register_highlevel(&video1394_highlevel);
 
 	ret = hpsb_register_protocol(&video1394_driver);
 	if (ret) {
 		PRINT_G(KERN_ERR, "video1394: failed to register protocol");
 		hpsb_unregister_highlevel(&video1394_highlevel);
-		devfs_remove(VIDEO1394_DRIVER_NAME);
 		cdev_del(&video1394_cdev);
 		return ret;
 	}
-- 
cgit v1.2.3


From c1d08eb6cd06c225d825c8981e05729389fd51a9 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 19:56:45 -0500
Subject: ieee1394: remove amdtp remains from ieee1394_core.h since amdtp
 driver was deleted

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/ieee1394_core.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index 50c69c767b5d..e7b55e895f50 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -201,14 +201,12 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size,
 #define IEEE1394_MINOR_BLOCK_RAW1394	   0
 #define IEEE1394_MINOR_BLOCK_VIDEO1394	   1
 #define IEEE1394_MINOR_BLOCK_DV1394	   2
-#define IEEE1394_MINOR_BLOCK_AMDTP	   3
 #define IEEE1394_MINOR_BLOCK_EXPERIMENTAL 15
 
 #define IEEE1394_CORE_DEV	  MKDEV(IEEE1394_MAJOR, 0)
 #define IEEE1394_RAW1394_DEV	  MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16)
 #define IEEE1394_VIDEO1394_DEV	  MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_VIDEO1394 * 16)
 #define IEEE1394_DV1394_DEV	  MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16)
-#define IEEE1394_AMDTP_DEV	  MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_AMDTP * 16)
 #define IEEE1394_EXPERIMENTAL_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_EXPERIMENTAL * 16)
 
 /* return the index (within a minor number block) of a file */
-- 
cgit v1.2.3


From 180a43044faeaa9bfe0c604d472023a6446430b5 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 19:57:34 -0500
Subject: ohci1394: clean up asynchronous and physical request filters
 programming

Various cleanups of how ohci1394 programs AsynchronousRequestFilter,
PhysicalRequestFilter, and physUpperBoundOffset. In particular, do not
rewrite registers within the bus reset interrupt handler if bus resets
do not affect the registers in the first place.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/ohci1394.c | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index eb329a875099..24d045c353e5 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -544,12 +544,19 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	/* Initialize IR Legacy DMA channel mask */
 	ohci->ir_legacy_channels = 0;
 
-	/*
-	 * Accept AT requests from all nodes. This probably
-	 * will have to be controlled from the subsystem
-	 * on a per node basis.
-	 */
-	reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
+	/* Accept AR requests from all nodes */
+	reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+	/* Set the address range of the physical response unit.
+	 * Most controllers do not implement it as a writable register though.
+	 * They will keep a hardwired offset of 0x00010000 and show 0x0 as
+	 * register content.
+	 * To actually enable physical responses is the job of our interrupt
+	 * handler which programs the physical request filter. */
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+
+	DBGMSG("physUpperBoundOffset=%08x",
+	       reg_read(ohci, OHCI1394_PhyUpperBound));
 
 	/* Specify AT retries */
 	reg_write(ohci, OHCI1394_ATRetries,
@@ -2516,26 +2523,20 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
 			reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
 			spin_unlock_irqrestore(&ohci->event_lock, flags);
 
-			/* Accept Physical requests from all nodes. */
-			reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0xffffffff);
-			reg_write(ohci,OHCI1394_AsReqFilterLoSet, 0xffffffff);
-
 			/* Turn on phys dma reception.
 			 *
 			 * TODO: Enable some sort of filtering management.
 			 */
 			if (phys_dma) {
-				reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0xffffffff);
-				reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0xffffffff);
-				reg_write(ohci,OHCI1394_PhyUpperBound, 0xffff0000);
-			} else {
-				reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0x00000000);
-				reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0x00000000);
+				reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
+					  0xffffffff);
+				reg_write(ohci, OHCI1394_PhyReqFilterLoSet,
+					  0xffffffff);
 			}
 
 			DBGMSG("PhyReqFilter=%08x%08x",
-			       reg_read(ohci,OHCI1394_PhyReqFilterHiSet),
-			       reg_read(ohci,OHCI1394_PhyReqFilterLoSet));
+			       reg_read(ohci, OHCI1394_PhyReqFilterHiSet),
+			       reg_read(ohci, OHCI1394_PhyReqFilterLoSet));
 
 			hpsb_selfid_complete(host, phyid, isroot);
 		} else
-- 
cgit v1.2.3


From 556640510d7e15664cb9bf2f70f7519bfedd6c29 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 19:59:42 -0500
Subject: sbp2: check for ARM failure

Sbp2 did not check for successful registration of the lower address range
when CONFIG_IEEE1394_SBP2_PHYS_DMA was set. If hpsb_register_addrspace
failed, a "login timed-out" would occur which is misleading. Now sbp2 logs
a sensible error message.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/sbp2.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 0b2b0da5b883..ce3b43dd229b 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -749,9 +749,13 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 
 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
 		/* Handle data movement if physical dma is not
-		 * enabled/supportedon host controller */
-		hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_physdma_ops,
-					0x0ULL, 0xfffffffcULL);
+		 * enabled or not supported on host controller */
+		if (!hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host,
+					     &sbp2_physdma_ops,
+					     0x0ULL, 0xfffffffcULL)) {
+			SBP2_ERR("failed to register lower 4GB address range");
+			goto failed_alloc;
+		}
 #endif
 	}
 
-- 
cgit v1.2.3


From 23e93f1742372bc938e53151bdbf88d284ee9561 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 20:03:34 -0500
Subject: ieee1394: set read permission for parameter disable_irm No need to
 hide it from /sys/module/ieee1394/parameters/.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/ieee1394_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index c0acaafe82d4..be6854e25ad4 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -58,7 +58,7 @@ MODULE_PARM_DESC(disable_nodemgr, "Disable nodemgr functionality.");
 
 /* Disable Isochronous Resource Manager functionality */
 int hpsb_disable_irm = 0;
-module_param_named(disable_irm, hpsb_disable_irm, bool, 0);
+module_param_named(disable_irm, hpsb_disable_irm, bool, 0444);
 MODULE_PARM_DESC(disable_irm,
 		 "Disable Isochronous Resource Manager functionality.");
 
-- 
cgit v1.2.3


From 8f0525ff1901f4fafe6d02d5d373ca38103ff5a7 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 20:03:45 -0500
Subject: sbp2: proper treatment of DID_OK

Sbp2 relied on DID_OK to be defined as 0. Always shift DID_OK into the right
position anyway, and explicitly return DID_OK together with CHECK_CONDITION.
Also comment on some #if 0 code. The patch does not change current behaviour.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/sbp2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index ce3b43dd229b..eb7106b8fd0a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -2410,7 +2410,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	 */
 	switch (scsi_status) {
 	case SBP2_SCSI_STATUS_GOOD:
-		SCpnt->result = DID_OK;
+		SCpnt->result = DID_OK << 16;
 		break;
 
 	case SBP2_SCSI_STATUS_BUSY:
@@ -2420,7 +2420,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 
 	case SBP2_SCSI_STATUS_CHECK_CONDITION:
 		SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
-		SCpnt->result = CHECK_CONDITION << 1;
+		SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16;
 
 		/*
 		 * Debug stuff
@@ -2454,7 +2454,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	/*
 	 * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
 	 */
-	if (SCpnt->result == DID_OK) {
+	if (SCpnt->result == DID_OK << 16) {
 		sbp2_check_sbp2_response(scsi_id, SCpnt);
 	}
 
@@ -2472,6 +2472,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	 * If a unit attention occurs, return busy status so it gets
 	 * retried... it could have happened because of a 1394 bus reset
 	 * or hot-plug...
+	 * XXX  DID_BUS_BUSY is actually a bad idea because it will defy
+	 * the scsi layer's retry logic.
 	 */
 #if 0
 	if ((scsi_status == SBP2_SCSI_STATUS_CHECK_CONDITION) &&
-- 
cgit v1.2.3


From d024ebc67eaa6bb7abca2e3061cb257a1587fa30 Mon Sep 17 00:00:00 2001
From: Stefan Richter
Date: Tue, 28 Mar 2006 20:03:55 -0500
Subject: sbp2: misc debug logging cleanups

 - move call of scsi_print_command from sbp2_send_command to the beginning of
   sbp2_queue_command to show also commands which are not sent
 - put sbp2's name into scsi_print_sense
 - use __FUNCTION__ in log messages
 - remove a few less useful log messages and comments

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/sbp2.c | 110 +++++++++++++++---------------------------------
 1 file changed, 33 insertions(+), 77 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index eb7106b8fd0a..2c765ca5aa50 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -214,6 +214,7 @@ static u32 global_outstanding_dmas = 0;
 #endif
 
 #define SBP2_ERR(fmt, args...)		HPSB_ERR("sbp2: "fmt, ## args)
+#define SBP2_DEBUG_ENTER()		SBP2_DEBUG("%s", __FUNCTION__)
 
 /*
  * Globals
@@ -535,7 +536,7 @@ static struct sbp2_command_info *sbp2util_allocate_command_orb(
 		command->Current_SCpnt = Current_SCpnt;
 		list_add_tail(&command->list, &scsi_id->sbp2_command_orb_inuse);
 	} else {
-		SBP2_ERR("sbp2util_allocate_command_orb - No orbs available!");
+		SBP2_ERR("%s: no orbs available", __FUNCTION__);
 	}
 	spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
 	return command;
@@ -549,7 +550,7 @@ static void sbp2util_free_command_dma(struct sbp2_command_info *command)
 	struct hpsb_host *host;
 
 	if (!scsi_id) {
-		printk(KERN_ERR "%s: scsi_id == NULL\n", __FUNCTION__);
+		SBP2_ERR("%s: scsi_id == NULL", __FUNCTION__);
 		return;
 	}
 
@@ -610,7 +611,7 @@ static int sbp2_probe(struct device *dev)
 	struct unit_directory *ud;
 	struct scsi_id_instance_data *scsi_id;
 
-	SBP2_DEBUG("sbp2_probe");
+	SBP2_DEBUG_ENTER();
 
 	ud = container_of(dev, struct unit_directory, device);
 
@@ -635,7 +636,7 @@ static int sbp2_remove(struct device *dev)
 	struct scsi_id_instance_data *scsi_id;
 	struct scsi_device *sdev;
 
-	SBP2_DEBUG("sbp2_remove");
+	SBP2_DEBUG_ENTER();
 
 	ud = container_of(dev, struct unit_directory, device);
 	scsi_id = ud->device.driver_data;
@@ -667,7 +668,7 @@ static int sbp2_update(struct unit_directory *ud)
 {
 	struct scsi_id_instance_data *scsi_id = ud->device.driver_data;
 
-	SBP2_DEBUG("sbp2_update");
+	SBP2_DEBUG_ENTER();
 
 	if (sbp2_reconnect_device(scsi_id)) {
 
@@ -715,7 +716,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 	struct Scsi_Host *scsi_host = NULL;
 	struct scsi_id_instance_data *scsi_id = NULL;
 
-	SBP2_DEBUG("sbp2_alloc_device");
+	SBP2_DEBUG_ENTER();
 
 	scsi_id = kzalloc(sizeof(*scsi_id), GFP_KERNEL);
 	if (!scsi_id) {
@@ -826,7 +827,7 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 	struct sbp2scsi_host_info *hi = scsi_id->hi;
 	int error;
 
-	SBP2_DEBUG("sbp2_start_device");
+	SBP2_DEBUG_ENTER();
 
 	/* Login FIFO DMA */
 	scsi_id->login_response =
@@ -901,7 +902,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 	 * allows someone else to login instead. One second makes sense. */
 	msleep_interruptible(1000);
 	if (signal_pending(current)) {
-		SBP2_WARN("aborting sbp2_start_device due to event");
 		sbp2_remove_device(scsi_id);
 		return -EINTR;
 	}
@@ -954,7 +954,7 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
 {
 	struct sbp2scsi_host_info *hi;
 
-	SBP2_DEBUG("sbp2_remove_device");
+	SBP2_DEBUG_ENTER();
 
 	if (!scsi_id)
 		return;
@@ -1086,23 +1086,20 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 	int max_logins;
 	int active_logins;
 
-	SBP2_DEBUG("sbp2_query_logins");
+	SBP2_DEBUG_ENTER();
 
 	scsi_id->query_logins_orb->reserved1 = 0x0;
 	scsi_id->query_logins_orb->reserved2 = 0x0;
 
 	scsi_id->query_logins_orb->query_response_lo = scsi_id->query_logins_response_dma;
 	scsi_id->query_logins_orb->query_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
-	SBP2_DEBUG("sbp2_query_logins: query_response_hi/lo initialized");
 
 	scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST);
 	scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1);
 	scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
-	SBP2_DEBUG("sbp2_query_logins: lun_misc initialized");
 
 	scsi_id->query_logins_orb->reserved_resp_length =
 		ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
-	SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
 
 	scsi_id->query_logins_orb->status_fifo_hi =
 		ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
@@ -1111,25 +1108,19 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 
 	sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
 
-	SBP2_DEBUG("sbp2_query_logins: orb byte-swapped");
-
 	sbp2util_packet_dump(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb),
 			     "sbp2 query logins orb", scsi_id->query_logins_orb_dma);
 
 	memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response));
 	memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
 
-	SBP2_DEBUG("sbp2_query_logins: query_logins_response/status FIFO memset");
-
 	data[0] = ORB_SET_NODE_ID(hi->host->node_id);
 	data[1] = scsi_id->query_logins_orb_dma;
 	sbp2util_cpu_to_be32_buffer(data, 8);
 
 	atomic_set(&scsi_id->sbp2_login_complete, 0);
 
-	SBP2_DEBUG("sbp2_query_logins: prepared to write");
 	hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
-	SBP2_DEBUG("sbp2_query_logins: written");
 
 	if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) {
 		SBP2_INFO("Error querying logins to SBP-2 device - timed out");
@@ -1178,10 +1169,10 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 	struct sbp2scsi_host_info *hi = scsi_id->hi;
 	quadlet_t data[2];
 
-	SBP2_DEBUG("sbp2_login_device");
+	SBP2_DEBUG_ENTER();
 
 	if (!scsi_id->login_orb) {
-		SBP2_DEBUG("sbp2_login_device: login_orb not alloc'd!");
+		SBP2_DEBUG("%s: login_orb not alloc'd!", __FUNCTION__);
 		return -EIO;
 	}
 
@@ -1195,59 +1186,39 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 	/* Set-up login ORB, assume no password */
 	scsi_id->login_orb->password_hi = 0;
 	scsi_id->login_orb->password_lo = 0;
-	SBP2_DEBUG("sbp2_login_device: password_hi/lo initialized");
 
 	scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma;
 	scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
-	SBP2_DEBUG("sbp2_login_device: login_response_hi/lo initialized");
 
 	scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
 	scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0);	/* One second reconnect time */
 	scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login);	/* Exclusive access to device */
 	scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1);	/* Notify us of login complete */
 	scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
-	SBP2_DEBUG("sbp2_login_device: lun_misc initialized");
 
 	scsi_id->login_orb->passwd_resp_lengths =
 		ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
-	SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
 
 	scsi_id->login_orb->status_fifo_hi =
 		ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
 	scsi_id->login_orb->status_fifo_lo =
 		ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
 
-	/*
-	 * Byte swap ORB if necessary
-	 */
 	sbp2util_cpu_to_be32_buffer(scsi_id->login_orb, sizeof(struct sbp2_login_orb));
 
-	SBP2_DEBUG("sbp2_login_device: orb byte-swapped");
-
 	sbp2util_packet_dump(scsi_id->login_orb, sizeof(struct sbp2_login_orb),
 			     "sbp2 login orb", scsi_id->login_orb_dma);
 
-	/*
-	 * Initialize login response and status fifo
-	 */
 	memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response));
 	memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
 
-	SBP2_DEBUG("sbp2_login_device: login_response/status FIFO memset");
-
-	/*
-	 * Ok, let's write to the target's management agent register
-	 */
 	data[0] = ORB_SET_NODE_ID(hi->host->node_id);
 	data[1] = scsi_id->login_orb_dma;
 	sbp2util_cpu_to_be32_buffer(data, 8);
 
 	atomic_set(&scsi_id->sbp2_login_complete, 0);
 
-	SBP2_DEBUG("sbp2_login_device: prepared to write to %08x",
-		   (unsigned int)scsi_id->sbp2_management_agent_addr);
 	hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
-	SBP2_DEBUG("sbp2_login_device: written");
 
 	/*
 	 * Wait for login status (up to 20 seconds)...
@@ -1311,7 +1282,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
 	quadlet_t data[2];
 	int error;
 
-	SBP2_DEBUG("sbp2_logout_device");
+	SBP2_DEBUG_ENTER();
 
 	/*
 	 * Set-up logout ORB
@@ -1375,7 +1346,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
 	quadlet_t data[2];
 	int error;
 
-	SBP2_DEBUG("sbp2_reconnect_device");
+	SBP2_DEBUG_ENTER();
 
 	/*
 	 * Set-up reconnect ORB
@@ -1466,17 +1437,11 @@ static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id)
 {
 	quadlet_t data;
 
-	SBP2_DEBUG("sbp2_set_busy_timeout");
+	SBP2_DEBUG_ENTER();
 
-	/*
-	 * Ok, let's write to the target's busy timeout register
-	 */
 	data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE);
-
-	if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4)) {
-		SBP2_ERR("sbp2_set_busy_timeout error");
-	}
-
+	if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4))
+		SBP2_ERR("%s error", __FUNCTION__);
 	return 0;
 }
 
@@ -1495,7 +1460,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	    firmware_revision, workarounds;
 	int i;
 
-	SBP2_DEBUG("sbp2_parse_unit_directory");
+	SBP2_DEBUG_ENTER();
 
 	management_agent_addr = 0x0;
 	command_set_spec_id = 0x0;
@@ -1628,7 +1593,7 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
 {
 	struct sbp2scsi_host_info *hi = scsi_id->hi;
 
-	SBP2_DEBUG("sbp2_max_speed_and_size");
+	SBP2_DEBUG_ENTER();
 
 	/* Initial setting comes from the hosts speed map */
 	scsi_id->speed_code =
@@ -1665,11 +1630,8 @@ static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait)
 	u64 addr;
 	int retval;
 
-	SBP2_DEBUG("sbp2_agent_reset");
+	SBP2_DEBUG_ENTER();
 
-	/*
-	 * Ok, let's write to the target's management agent register
-	 */
 	data = ntohl(SBP2_AGENT_RESET_DATA);
 	addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
 
@@ -2017,11 +1979,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
 	unsigned int request_bufflen = SCpnt->request_bufflen;
 	struct sbp2_command_info *command;
 
-	SBP2_DEBUG("sbp2_send_command");
-#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
-	printk("[scsi command]\n   ");
-	scsi_print_command(SCpnt);
-#endif
+	SBP2_DEBUG_ENTER();
 	SBP2_DEBUG("SCSI transfer size = %x", request_bufflen);
 	SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg);
 
@@ -2061,7 +2019,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
  */
 static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data)
 {
-	SBP2_DEBUG("sbp2_status_to_sense_data");
+	SBP2_DEBUG_ENTER();
 
 	/*
 	 * Ok, it's pretty ugly...   ;-)
@@ -2095,7 +2053,7 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
 {
 	u8 *scsi_buf = SCpnt->request_buffer;
 
-	SBP2_DEBUG("sbp2_check_sbp2_response");
+	SBP2_DEBUG_ENTER();
 
 	if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
 		/*
@@ -2126,7 +2084,7 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
 	struct sbp2_command_info *command;
 	unsigned long flags;
 
-	SBP2_DEBUG("sbp2_handle_status_write");
+	SBP2_DEBUG_ENTER();
 
 	sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr);
 
@@ -2273,7 +2231,10 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	struct sbp2scsi_host_info *hi;
 	int result = DID_NO_CONNECT << 16;
 
-	SBP2_DEBUG("sbp2scsi_queuecommand");
+	SBP2_DEBUG_ENTER();
+#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
+	scsi_print_command(SCpnt);
+#endif
 
 	if (!sbp2util_node_is_available(scsi_id))
 		goto done;
@@ -2351,7 +2312,7 @@ static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id
 	struct sbp2_command_info *command;
 	unsigned long flags;
 
-	SBP2_DEBUG("sbp2scsi_complete_all_commands");
+	SBP2_DEBUG_ENTER();
 
 	spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
 	while (!list_empty(&scsi_id->sbp2_command_orb_inuse)) {
@@ -2384,7 +2345,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 				      u32 scsi_status, struct scsi_cmnd *SCpnt,
 				      void (*done)(struct scsi_cmnd *))
 {
-	SBP2_DEBUG("sbp2scsi_complete_command");
+	SBP2_DEBUG_ENTER();
 
 	/*
 	 * Sanity
@@ -2421,15 +2382,10 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	case SBP2_SCSI_STATUS_CHECK_CONDITION:
 		SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
 		SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16;
-
-		/*
-		 * Debug stuff
-		 */
 #if CONFIG_IEEE1394_SBP2_DEBUG >= 1
 		scsi_print_command(SCpnt);
-		scsi_print_sense("bh", SCpnt);
+		scsi_print_sense(SBP2_DEVICE_NAME, SCpnt);
 #endif
-
 		break;
 
 	case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
@@ -2639,7 +2595,7 @@ static int sbp2_module_init(void)
 {
 	int ret;
 
-	SBP2_DEBUG("sbp2_module_init");
+	SBP2_DEBUG_ENTER();
 
 	/* Module load debug option to force one command at a time (serializing I/O) */
 	if (serialize_io) {
@@ -2667,7 +2623,7 @@ static int sbp2_module_init(void)
 
 static void __exit sbp2_module_exit(void)
 {
-	SBP2_DEBUG("sbp2_module_exit");
+	SBP2_DEBUG_ENTER();
 
 	hpsb_unregister_protocol(&sbp2_driver);
 
-- 
cgit v1.2.3


From 94c2d01a537daf51a9fcf229d7d2204c979355d9 Mon Sep 17 00:00:00 2001
From: Jody McIntyre
Date: Tue, 28 Mar 2006 20:04:04 -0500
Subject: ohci1394: cleanup the "Unexpected PCI resource length" warning.

This warning happens in practice because the resource length reported by
the chipset is too large.  This is not actually a problem, so don't warn
about it.  If it happens to be too small, warn about that, but with
a different message so people who are used to ignoring the old message
don't.

Signed-off-by: Jody McIntyre <scjody@modernduck.com>
---
 drivers/ieee1394/ohci1394.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 24d045c353e5..a86beeb6af5d 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3262,8 +3262,8 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
 	 * fail to report the right length.  Anyway, the ohci spec
 	 * clearly says it's 2kb, so this shouldn't be a problem. */
 	ohci_base = pci_resource_start(dev, 0);
-	if (pci_resource_len(dev, 0) != OHCI1394_REGISTER_SIZE)
-		PRINT(KERN_WARNING, "Unexpected PCI resource length of %lx!",
+	if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
+		PRINT(KERN_WARNING, "PCI resource length of %lx too small!",
 		      pci_resource_len(dev, 0));
 
 	/* Seems PCMCIA handles this internally. Not sure why. Seems
-- 
cgit v1.2.3