From 260ecb3c915fae3d67bf0378016ae68929be3b0e Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 10 Nov 2015 17:43:30 +0800 Subject: mmc: sdhci-esdhc-imx: correct the tuning-step setting Here we use '|=' to set the tuning-step, but before that, we should clear the tuning-step, otherwise we could got the wrong setting. Signed-off-by: Haibo Chen Acked-by: Dong Aisheng Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1f1582f6cccb..f25f29253595 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -76,6 +76,7 @@ #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP 0x1 +#define ESDHC_TUNING_STEP_MASK 0x00070000 #define ESDHC_TUNING_STEP_SHIFT 16 /* pinctrl state */ @@ -489,9 +490,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) m |= ESDHC_MIX_CTRL_FBCLK_SEL; tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL); tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP; - if (imx_data->boarddata.tuning_step) + if (imx_data->boarddata.tuning_step) { + tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK; tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT; - writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); + } + writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } -- cgit v1.2.3