From 5654dc94f872f823aa13941a8fdba69a3feca39c Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Mon, 26 Mar 2012 11:51:34 -0700
Subject: clk: core: correct clk_set_rate kerneldoc

Remove old and misleading documentation from the previous clk_set_rate
implementaion.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 41 +++++++++++------------------------------
 1 file changed, 11 insertions(+), 30 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9cf6f59e3e19..3ed36d3056de 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -859,38 +859,19 @@ static void clk_change_rate(struct clk *clk)
  * @clk: the clk whose rate is being changed
  * @rate: the new rate for clk
  *
- * In the simplest case clk_set_rate will only change the rate of clk.
+ * In the simplest case clk_set_rate will only adjust the rate of clk.
  *
- * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call
- * will fail; only when the clk is disabled will it be able to change
- * its rate.
+ * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to
+ * propagate up to clk's parent; whether or not this happens depends on the
+ * outcome of clk's .round_rate implementation.  If *parent_rate is unchanged
+ * after calling .round_rate then upstream parent propagation is ignored.  If
+ * *parent_rate comes back with a new rate for clk's parent then we propagate
+ * up to clk's parent and set it's rate.  Upward propagation will continue
+ * until either a clk does not support the CLK_SET_RATE_PARENT flag or
+ * .round_rate stops requesting changes to clk's parent_rate.
  *
- * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to
- * recursively propagate up to clk's parent; whether or not this happens
- * depends on the outcome of clk's .round_rate implementation.  If
- * *parent_rate is 0 after calling .round_rate then upstream parent
- * propagation is ignored.  If *parent_rate comes back with a new rate
- * for clk's parent then we propagate up to clk's parent and set it's
- * rate.  Upward propagation will continue until either a clk does not
- * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting
- * changes to clk's parent_rate.  If there is a failure during upstream
- * propagation then clk_set_rate will unwind and restore each clk's rate
- * that had been successfully changed.  Afterwards a rate change abort
- * notification will be propagated downstream, starting from the clk
- * that failed.
- *
- * At the end of all of the rate setting, clk_set_rate internally calls
- * __clk_recalc_rates and propagates the rate changes downstream,
- * starting from the highest clk whose rate was changed.  This has the
- * added benefit of propagating post-rate change notifiers.
- *
- * Note that while post-rate change and rate change abort notifications
- * are guaranteed to be sent to a clk only once per call to
- * clk_set_rate, pre-change notifications will be sent for every clk
- * whose rate is changed.  Stacking pre-change notifications is noisy
- * for the drivers subscribed to them, but this allows drivers to react
- * to intermediate clk rate changes up until the point where the final
- * rate is achieved at the end of upstream propagation.
+ * Rate changes are accomplished via tree traversal that also recalculates the
+ * rates for the clocks and fires off POST_RATE_CHANGE notifiers.
  *
  * Returns 0 on success, -EERROR otherwise.
  */
-- 
cgit v1.2.3


From 70d347e6cd0d2a7ecc023b44ef721bc2c2a38f22 Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Mon, 26 Mar 2012 11:53:47 -0700
Subject: clk: core: remove dead code paths

Some static inline dummy functions were left over from before the clock
core was consolidated from several C files down to one.  Remove them.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 3ed36d3056de..4daacf5783aa 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -194,7 +194,7 @@ static int __init clk_debug_init(void)
 late_initcall(clk_debug_init);
 #else
 static inline int clk_debug_register(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DEBUG */
+#endif
 
 #ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED
 /* caller must hold prepare_lock */
@@ -246,9 +246,7 @@ static int clk_disable_unused(void)
 	return 0;
 }
 late_initcall(clk_disable_unused);
-#else
-static inline int clk_disable_unused(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */
+#endif
 
 /***    helper functions   ***/
 
-- 
cgit v1.2.3


From 7452b2191cd55fb3fd6ad65344466ddcdbe4676e Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Mon, 26 Mar 2012 14:45:36 -0700
Subject: clk: core: clk_calc_new_rates handles NULL parents

It is possible to call clk_set_rate on a clock with a NULL parent.  One
such example is an adjustable-rate root clock.  Ensure that
clk_calc_new_rates does not dereference parent without checking first
and also handle the corner cases gracefully.

Reported-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 4daacf5783aa..d83a9e09e1bf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -763,25 +763,38 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate)
 static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 {
 	struct clk *top = clk;
-	unsigned long best_parent_rate = clk->parent->rate;
+	unsigned long best_parent_rate;
 	unsigned long new_rate;
 
-	if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) {
-		clk->new_rate = clk->rate;
+	/* sanity */
+	if (IS_ERR_OR_NULL(clk))
+		return NULL;
+
+	/* never propagate up to the parent */
+	if (!(clk->flags & CLK_SET_RATE_PARENT)) {
+		if (!clk->ops->round_rate) {
+			clk->new_rate = clk->rate;
+			return NULL;
+		} else {
+			new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+			goto out;
+		}
+	}
+
+	/* need clk->parent from here on out */
+	if (!clk->parent) {
+		pr_debug("%s: %s has NULL parent\n", __func__, clk->name);
 		return NULL;
 	}
 
-	if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) {
+	if (!clk->ops->round_rate) {
 		top = clk_calc_new_rates(clk->parent, rate);
 		new_rate = clk->new_rate = clk->parent->new_rate;
 
 		goto out;
 	}
 
-	if (clk->flags & CLK_SET_RATE_PARENT)
-		new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
-	else
-		new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+	new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
 
 	if (best_parent_rate != clk->parent->rate) {
 		top = clk_calc_new_rates(clk->parent, best_parent_rate);
-- 
cgit v1.2.3


From d4d7e3ddc76c5ae3b4fbd15cb6f30aa78c28d788 Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Mon, 26 Mar 2012 16:15:52 -0700
Subject: clk: core: enforce clk_ops consistency

Documentation/clk.txt has some handsome ASCII art outlining which
clk_ops are mandatory for a given clock, given the capability of the
hardware.  Enforce those mandates with sanity checks in __clk_init.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index d83a9e09e1bf..9924aec17aad 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1202,6 +1202,20 @@ void __clk_init(struct device *dev, struct clk *clk)
 	if (__clk_lookup(clk->name))
 		goto out;
 
+	/* check that clk_ops are sane.  See Documentation/clk.txt */
+	if (clk->ops->set_rate &&
+			!(clk->ops->round_rate && clk->ops->recalc_rate)) {
+		pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
+				__func__, clk->name);
+		goto out;
+	}
+
+	if (clk->ops->set_parent && !clk->ops->get_parent) {
+		pr_warning("%s: %s must implement .get_parent & .set_parent\n",
+				__func__, clk->name);
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
-- 
cgit v1.2.3


From 10363b5838b4d5dcbf01db219f35e91aa94f24c6 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Tue, 27 Mar 2012 15:23:20 +0800
Subject: clk: use kzalloc in clk_register_mux

Change clk_register_mux to use kzalloc, just like what all other basic
clk registration functions do.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c71ad1f41a97..50e05953c8d3 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -97,7 +97,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 {
 	struct clk_mux *mux;
 
-	mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL);
+	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
 
 	if (!mux) {
 		pr_err("%s: could not allocate mux clk\n", __func__);
-- 
cgit v1.2.3


From c0d2530c03cbf3741cb7a0f8ebae93e7a563fc58 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Tue, 27 Mar 2012 15:23:21 +0800
Subject: clk: remove unnecessary EXPORT_SYMBOL_GPL

It makes no sense to have EXPORT_SYMBOL_GPL on static functions.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    | 3 ---
 drivers/clk/clk-fixed-rate.c | 1 -
 drivers/clk/clk-gate.c       | 3 ---
 drivers/clk/clk-mux.c        | 2 --
 4 files changed, 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index d5ac6a75ea57..231cd6e89003 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -45,7 +45,6 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 
 	return parent_rate / div;
 }
-EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
 
 /*
  * The reverse of DIV_ROUND_UP: The maximum number which
@@ -117,7 +116,6 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 		return r / div;
 	}
 }
-EXPORT_SYMBOL_GPL(clk_divider_round_rate);
 
 static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
 {
@@ -147,7 +145,6 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_divider_set_rate);
 
 struct clk_ops clk_divider_ops = {
 	.recalc_rate = clk_divider_recalc_rate,
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 90c79fb5d1bd..651b06f49e15 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -32,7 +32,6 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 {
 	return to_clk_fixed_rate(hw)->fixed_rate;
 }
-EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
 
 struct clk_ops clk_fixed_rate_ops = {
 	.recalc_rate = clk_fixed_rate_recalc_rate,
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index b5902e2ef2fd..b688f4775859 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -71,7 +71,6 @@ static int clk_gate_enable(struct clk_hw *hw)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_gate_enable);
 
 static void clk_gate_disable(struct clk_hw *hw)
 {
@@ -82,7 +81,6 @@ static void clk_gate_disable(struct clk_hw *hw)
 	else
 		clk_gate_clear_bit(gate);
 }
-EXPORT_SYMBOL_GPL(clk_gate_disable);
 
 static int clk_gate_is_enabled(struct clk_hw *hw)
 {
@@ -99,7 +97,6 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 
 	return reg ? 1 : 0;
 }
-EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
 
 struct clk_ops clk_gate_ops = {
 	.enable = clk_gate_enable,
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 50e05953c8d3..45cad61600c9 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -55,7 +55,6 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 
 	return val;
 }
-EXPORT_SYMBOL_GPL(clk_mux_get_parent);
 
 static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 {
@@ -82,7 +81,6 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_mux_set_parent);
 
 struct clk_ops clk_mux_ops = {
 	.get_parent = clk_mux_get_parent,
-- 
cgit v1.2.3


From 822c250e154cd44cf60a4f0d647aa70abea09520 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Tue, 27 Mar 2012 15:23:22 +0800
Subject: clk: add "const" for clk_ops of basic clks

The clk_ops of basic clks should have "const" to match the definition
in "struct clk" and clk_register prototype.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    | 2 +-
 drivers/clk/clk-fixed-rate.c | 2 +-
 drivers/clk/clk-gate.c       | 2 +-
 drivers/clk/clk-mux.c        | 2 +-
 include/linux/clk-private.h  | 8 ++++----
 5 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 231cd6e89003..b1c4b02aaaf1 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -146,7 +146,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
 	return 0;
 }
 
-struct clk_ops clk_divider_ops = {
+const struct clk_ops clk_divider_ops = {
 	.recalc_rate = clk_divider_recalc_rate,
 	.round_rate = clk_divider_round_rate,
 	.set_rate = clk_divider_set_rate,
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 651b06f49e15..027e47704de9 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -33,7 +33,7 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 	return to_clk_fixed_rate(hw)->fixed_rate;
 }
 
-struct clk_ops clk_fixed_rate_ops = {
+const struct clk_ops clk_fixed_rate_ops = {
 	.recalc_rate = clk_fixed_rate_recalc_rate,
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index b688f4775859..fe2ff9e774c2 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -98,7 +98,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 	return reg ? 1 : 0;
 }
 
-struct clk_ops clk_gate_ops = {
+const struct clk_ops clk_gate_ops = {
 	.enable = clk_gate_enable,
 	.disable = clk_gate_disable,
 	.is_enabled = clk_gate_is_enabled,
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 45cad61600c9..54244889a948 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -82,7 +82,7 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	return 0;
 }
 
-struct clk_ops clk_mux_ops = {
+const struct clk_ops clk_mux_ops = {
 	.get_parent = clk_mux_get_parent,
 	.set_parent = clk_mux_set_parent,
 };
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index 5e4312b6f5cc..5f4ccd7cd761 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -55,7 +55,7 @@ struct clk {
  * alternative macro for static initialization
  */
 
-extern struct clk_ops clk_fixed_rate_ops;
+extern const struct clk_ops clk_fixed_rate_ops;
 
 #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
 				_fixed_rate_flags)		\
@@ -78,7 +78,7 @@ extern struct clk_ops clk_fixed_rate_ops;
 		.flags = _flags,				\
 	};
 
-extern struct clk_ops clk_gate_ops;
+extern const struct clk_ops clk_gate_ops;
 
 #define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _bit_idx,		\
@@ -110,7 +110,7 @@ extern struct clk_ops clk_gate_ops;
 		.flags = _flags,				\
 	};
 
-extern struct clk_ops clk_divider_ops;
+extern const struct clk_ops clk_divider_ops;
 
 #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _shift, _width,	\
@@ -143,7 +143,7 @@ extern struct clk_ops clk_divider_ops;
 		.flags = _flags,				\
 	};
 
-extern struct clk_ops clk_mux_ops;
+extern const struct clk_ops clk_mux_ops;
 
 #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
 				_reg, _shift, _width,		\
-- 
cgit v1.2.3


From 34e44fe87437b6a5aad856f15f7a849e5fc137aa Mon Sep 17 00:00:00 2001
From: Rajendra Nayak
Date: Mon, 26 Mar 2012 19:01:48 +0530
Subject: clk: Make clk_get_rate() return 0 on error

Most users of clk_get_rate() actually assume a non zero
return value as a valid rate returned. Returing -EINVAL
might confuse such users, so make it instead return zero
on error.

Besides the return value of clk_get_rate seems to be
'unsigned long'.

Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9924aec17aad..a24b121747ac 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -285,7 +285,7 @@ unsigned long __clk_get_rate(struct clk *clk)
 	unsigned long ret;
 
 	if (!clk) {
-		ret = -EINVAL;
+		ret = 0;
 		goto out;
 	}
 
@@ -295,7 +295,7 @@ unsigned long __clk_get_rate(struct clk *clk)
 		goto out;
 
 	if (!clk->parent)
-		ret = -ENODEV;
+		ret = 0;
 
 out:
 	return ret;
@@ -560,7 +560,7 @@ EXPORT_SYMBOL_GPL(clk_enable);
  * @clk: the clk whose rate is being returned
  *
  * Simply returns the cached rate of the clk.  Does not query the hardware.  If
- * clk is NULL then returns -EINVAL.
+ * clk is NULL then returns 0.
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
-- 
cgit v1.2.3


From d305fb78f31209596c9135d396a0d3af7ac86947 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Wed, 21 Mar 2012 20:01:20 +0000
Subject: clk: Constify parent name arrays

Drivers should be able to declare their arrays of parent names as const
so the APIs need to accept const arguments.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mturquette@linaro.org: constified gate]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-mux.c        | 2 +-
 drivers/clk/clk.c            | 2 +-
 include/linux/clk-private.h  | 2 +-
 include/linux/clk-provider.h | 8 ++++----
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 54244889a948..bd5e598b9f1e 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -89,7 +89,7 @@ const struct clk_ops clk_mux_ops = {
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
 struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
+		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock)
 {
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index a24b121747ac..ddade8759ea9 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1328,7 +1328,7 @@ out:
  */
 struct clk *clk_register(struct device *dev, const char *name,
 		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags)
+		const char **parent_names, u8 num_parents, unsigned long flags)
 {
 	struct clk *clk;
 
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index f19fee0190cb..e9c8b9841b16 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -30,7 +30,7 @@ struct clk {
 	const struct clk_ops	*ops;
 	struct clk_hw		*hw;
 	struct clk		*parent;
-	char			**parent_names;
+	const char		**parent_names;
 	struct clk		**parents;
 	u8			num_parents;
 	unsigned long		rate;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 6eb8e5da788e..8981435f9064 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -176,7 +176,7 @@ struct clk_gate {
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
+	const char	*parent[1];
 };
 
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
@@ -214,7 +214,7 @@ struct clk_divider {
 	u8		width;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
+	const char	*parent[1];
 };
 
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
@@ -257,7 +257,7 @@ struct clk_mux {
 
 extern const struct clk_ops clk_mux_ops;
 struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
+		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock);
 
@@ -278,7 +278,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
  */
 struct clk *clk_register(struct device *dev, const char *name,
 		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags);
+		const char **parent_names, u8 num_parents, unsigned long flags);
 
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);
-- 
cgit v1.2.3


From d1302a36a7f1c33d1a8babc6a510e1401a5e5aed Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Thu, 29 Mar 2012 14:30:40 -0700
Subject: clk: core: copy parent_names & return error codes

This patch cleans up clk_register and solves a few bugs by teaching
clk_register and __clk_init to return error codes (instead of just NULL)
to better align with the existing clk.h api.

Along with that change this patch also introduces a new behavior whereby
clk_register copies the parent_names array, thus allowing platforms to
declare their parent_names arrays as __initdata.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c            | 65 ++++++++++++++++++++++++++++++++++++--------
 include/linux/clk-private.h  |  4 ++-
 include/linux/clk-provider.h |  3 +-
 3 files changed, 58 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ddade8759ea9..8f7c3849c8f6 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1185,34 +1185,41 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
  * very large numbers of clocks that need to be statically initialized.  It is
  * a layering violation to include clk-private.h from any code which implements
  * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.
+ * separate C file from the logic that implements it's operations.  Returns 0
+ * on success, otherwise an error code.
  */
-void __clk_init(struct device *dev, struct clk *clk)
+int __clk_init(struct device *dev, struct clk *clk)
 {
-	int i;
+	int i, ret = 0;
 	struct clk *orphan;
 	struct hlist_node *tmp, *tmp2;
 
 	if (!clk)
-		return;
+		return -EINVAL;
 
 	mutex_lock(&prepare_lock);
 
 	/* check to see if a clock with this name is already registered */
-	if (__clk_lookup(clk->name))
+	if (__clk_lookup(clk->name)) {
+		pr_debug("%s: clk %s already initialized\n",
+				__func__, clk->name);
+		ret = -EEXIST;
 		goto out;
+	}
 
 	/* check that clk_ops are sane.  See Documentation/clk.txt */
 	if (clk->ops->set_rate &&
 			!(clk->ops->round_rate && clk->ops->recalc_rate)) {
 		pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
 				__func__, clk->name);
+		ret = -EINVAL;
 		goto out;
 	}
 
 	if (clk->ops->set_parent && !clk->ops->get_parent) {
 		pr_warning("%s: %s must implement .get_parent & .set_parent\n",
 				__func__, clk->name);
+		ret = -EINVAL;
 		goto out;
 	}
 
@@ -1308,7 +1315,7 @@ void __clk_init(struct device *dev, struct clk *clk)
 out:
 	mutex_unlock(&prepare_lock);
 
-	return;
+	return ret;
 }
 
 /**
@@ -1324,29 +1331,63 @@ out:
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
  * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
  */
 struct clk *clk_register(struct device *dev, const char *name,
 		const struct clk_ops *ops, struct clk_hw *hw,
 		const char **parent_names, u8 num_parents, unsigned long flags)
 {
+	int i, ret;
 	struct clk *clk;
 
 	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
-	if (!clk)
-		return NULL;
+	if (!clk) {
+		pr_err("%s: could not allocate clk\n", __func__);
+		ret = -ENOMEM;
+		goto fail_out;
+	}
 
 	clk->name = name;
 	clk->ops = ops;
 	clk->hw = hw;
 	clk->flags = flags;
-	clk->parent_names = parent_names;
 	clk->num_parents = num_parents;
 	hw->clk = clk;
 
-	__clk_init(dev, clk);
+	/* allocate local copy in case parent_names is __initdata */
+	clk->parent_names = kzalloc((sizeof(char*) * num_parents),
+			GFP_KERNEL);
+
+	if (!clk->parent_names) {
+		pr_err("%s: could not allocate clk->parent_names\n", __func__);
+		ret = -ENOMEM;
+		goto fail_parent_names;
+	}
+
+
+	/* copy each string name in case parent_names is __initdata */
+	for (i = 0; i < num_parents; i++) {
+		clk->parent_names[i] = kstrdup(parent_names[i], GFP_KERNEL);
+		if (!clk->parent_names[i]) {
+			pr_err("%s: could not copy parent_names\n", __func__);
+			ret = -ENOMEM;
+			goto fail_parent_names_copy;
+		}
+	}
+
+	ret = __clk_init(dev, clk);
+	if (!ret)
+		return clk;
 
-	return clk;
+fail_parent_names_copy:
+	while (--i >= 0)
+		kfree(clk->parent_names[i]);
+	kfree(clk->parent_names);
+fail_parent_names:
+	kfree(clk);
+fail_out:
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(clk_register);
 
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index e9c8b9841b16..e7032fdd45eb 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -181,8 +181,10 @@ struct clk {
  *
  * It is not necessary to call clk_register if __clk_init is used directly with
  * statically initialized clock data.
+ *
+ * Returns 0 on success, otherwise an error code.
  */
-void __clk_init(struct device *dev, struct clk *clk);
+int __clk_init(struct device *dev, struct clk *clk);
 
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 8981435f9064..97f9fabf3be2 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -274,7 +274,8 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
  * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
  */
 struct clk *clk_register(struct device *dev, const char *name,
 		const struct clk_ops *ops, struct clk_hw *hw,
-- 
cgit v1.2.3


From 27d545915fd49cbe18a3877d82359896e9851efb Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Mon, 26 Mar 2012 17:51:03 -0700
Subject: clk: basic: improve parent_names & return errors

This patch is the basic clk version of 'clk: core: copy parent_names &
return error codes'.

The registration functions are changed to allow the core code to copy
the array of strings and allow platforms to declare those arrays as
__initdata.

This patch also converts all of the basic clk registration functions to
return error codes which better aligns them with the existing clk.h api.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    | 34 +++++++++++++++++++---------------
 drivers/clk/clk-fixed-rate.c | 40 ++++++++++++++++++----------------------
 drivers/clk/clk-gate.c       | 34 +++++++++++++++++++---------------
 drivers/clk/clk-mux.c        | 10 ++++++++--
 include/linux/clk-provider.h |  2 --
 5 files changed, 64 insertions(+), 56 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index b1c4b02aaaf1..5fc541d017f1 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -153,6 +153,18 @@ const struct clk_ops clk_divider_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -161,11 +173,11 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 	struct clk_divider *div;
 	struct clk *clk;
 
+	/* allocate the divider */
 	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-
 	if (!div) {
 		pr_err("%s: could not allocate divider clk\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	/* struct clk_divider assignments */
@@ -175,23 +187,15 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 	div->flags = clk_divider_flags;
 	div->lock = lock;
 
-	if (parent_name) {
-		div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!div->parent[0])
-			goto out;
-	}
-
+	/* register the clock */
 	clk = clk_register(dev, name,
 			&clk_divider_ops, &div->hw,
-			div->parent,
+			(parent_name ? &parent_name: NULL),
 			(parent_name ? 1 : 0),
 			flags);
-	if (clk)
-		return clk;
 
-out:
-	kfree(div->parent[0]);
-	kfree(div);
+	if (IS_ERR(clk))
+		kfree(div);
 
-	return NULL;
+	return clk;
 }
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 027e47704de9..b555a04c8df8 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -38,16 +38,23 @@ const struct clk_ops clk_fixed_rate_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
 
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate)
 {
 	struct clk_fixed_rate *fixed;
-	char **parent_names = NULL;
-	u8 len;
+	struct clk *clk;
 
+	/* allocate fixed-rate clock */
 	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
-
 	if (!fixed) {
 		pr_err("%s: could not allocate fixed clk\n", __func__);
 		return ERR_PTR(-ENOMEM);
@@ -56,26 +63,15 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 	/* struct clk_fixed_rate assignments */
 	fixed->fixed_rate = fixed_rate;
 
-	if (parent_name) {
-		parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
-
-		if (! parent_names)
-			goto out;
-
-		len = sizeof(char) * strlen(parent_name);
-
-		parent_names[0] = kmalloc(len, GFP_KERNEL);
-
-		if (!parent_names[0])
-			goto out;
-
-		strncpy(parent_names[0], parent_name, len);
-	}
-
-out:
-	return clk_register(dev, name,
+	/* register the clock */
+	clk = clk_register(dev, name,
 			&clk_fixed_rate_ops, &fixed->hw,
-			parent_names,
+			(parent_name ? &parent_name : NULL),
 			(parent_name ? 1 : 0),
 			flags);
+
+	if (IS_ERR(clk))
+		kfree(fixed);
+
+	return clk;
 }
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index fe2ff9e774c2..42a4b941b6e7 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -105,6 +105,17 @@ const struct clk_ops clk_gate_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_gate_ops);
 
+/**
+ * clk_register_gate - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of this clock's parent
+ * @flags: framework-specific flags for this clock
+ * @reg: register address to control gating of this clock
+ * @bit_idx: which bit in the register controls gating of this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
 struct clk *clk_register_gate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
@@ -113,11 +124,11 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	struct clk_gate *gate;
 	struct clk *clk;
 
+	/* allocate the gate */
 	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-
 	if (!gate) {
 		pr_err("%s: could not allocate gated clk\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	/* struct clk_gate assignments */
@@ -126,22 +137,15 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	gate->flags = clk_gate_flags;
 	gate->lock = lock;
 
-	if (parent_name) {
-		gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!gate->parent[0])
-			goto out;
-	}
-
+	/* register the clock */
 	clk = clk_register(dev, name,
 			&clk_gate_ops, &gate->hw,
-			gate->parent,
+			(parent_name ? &parent_name : NULL),
 			(parent_name ? 1 : 0),
 			flags);
-	if (clk)
-		return clk;
-out:
-	kfree(gate->parent[0]);
-	kfree(gate);
 
-	return NULL;
+	if (IS_ERR(clk))
+		kfree(gate);
+
+	return clk;
 }
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index bd5e598b9f1e..6e58f11ab81f 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -94,9 +94,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 		u8 clk_mux_flags, spinlock_t *lock)
 {
 	struct clk_mux *mux;
+	struct clk *clk;
 
+	/* allocate the mux */
 	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
-
 	if (!mux) {
 		pr_err("%s: could not allocate mux clk\n", __func__);
 		return ERR_PTR(-ENOMEM);
@@ -109,6 +110,11 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
 
-	return clk_register(dev, name, &clk_mux_ops, &mux->hw,
+	clk = clk_register(dev, name, &clk_mux_ops, &mux->hw,
 			parent_names, num_parents, flags);
+
+	if (IS_ERR(clk))
+		kfree(mux);
+
+	return clk;
 }
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 97f9fabf3be2..3323d24a7be4 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -176,7 +176,6 @@ struct clk_gate {
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
-	const char	*parent[1];
 };
 
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
@@ -214,7 +213,6 @@ struct clk_divider {
 	u8		width;
 	u8		flags;
 	spinlock_t	*lock;
-	const char	*parent[1];
 };
 
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
-- 
cgit v1.2.3


From 81536e072b54e30bbfd1a9a6b8094f7b3dd5321c Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Thu, 12 Apr 2012 20:50:17 +0800
Subject: clk: always pass parent_rate into .round_rate

The parent_rate will likely be used by most .round_rate implementation
no matter whether flag CLK_SET_RATE_PARENT is set or not, so let's
always pass parent_rate into .round_rate.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c | 12 +++---------
 drivers/clk/clk.c         | 16 +++++++---------
 2 files changed, 10 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 5fc541d017f1..03b127c0313b 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -67,8 +67,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_ONE_BASED)
 		maxdiv--;
 
-	if (!best_parent_rate) {
-		parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+		parent_rate = *best_parent_rate;
 		bestdiv = DIV_ROUND_UP(parent_rate, rate);
 		bestdiv = bestdiv == 0 ? 1 : bestdiv;
 		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
@@ -108,13 +108,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	int div;
 	div = clk_divider_bestdiv(hw, rate, prate);
 
-	if (prate)
-		return *prate / div;
-	else {
-		unsigned long r;
-		r = __clk_get_rate(__clk_get_parent(hw->clk));
-		return r / div;
-	}
+	return *prate / div;
 }
 
 static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 8f7c3849c8f6..1ab4f7e5c7ef 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -582,7 +582,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
  */
 unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long unused;
+	unsigned long parent_rate = 0;
 
 	if (!clk)
 		return -EINVAL;
@@ -590,10 +590,10 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
 	if (!clk->ops->round_rate)
 		return clk->rate;
 
-	if (clk->flags & CLK_SET_RATE_PARENT)
-		return clk->ops->round_rate(clk->hw, rate, &unused);
-	else
-		return clk->ops->round_rate(clk->hw, rate, NULL);
+	if (clk->parent)
+		parent_rate = clk->parent->rate;
+
+	return clk->ops->round_rate(clk->hw, rate, &parent_rate);
 }
 
 /**
@@ -763,7 +763,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate)
 static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 {
 	struct clk *top = clk;
-	unsigned long best_parent_rate;
+	unsigned long best_parent_rate = 0;
 	unsigned long new_rate;
 
 	/* sanity */
@@ -775,9 +775,6 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 		if (!clk->ops->round_rate) {
 			clk->new_rate = clk->rate;
 			return NULL;
-		} else {
-			new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
-			goto out;
 		}
 	}
 
@@ -794,6 +791,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 		goto out;
 	}
 
+	best_parent_rate = clk->parent->rate;
 	new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
 
 	if (best_parent_rate != clk->parent->rate) {
-- 
cgit v1.2.3


From 1c0035d710dd3bfa86d58f851b8737c7f11a9bbc Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Thu, 12 Apr 2012 20:50:18 +0800
Subject: clk: pass parent_rate into .set_rate

For most of .set_rate implementation, parent_rate will be used, so just
like passing parent_rate into .recalc_rate, let's pass parent_rate into
.set_rate too.

It also updates the kernel doc for .set_rate ops.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    |  5 +++--
 drivers/clk/clk.c            |  2 +-
 include/linux/clk-provider.h | 21 +++++++--------------
 3 files changed, 11 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 03b127c0313b..90627e4069af 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -111,14 +111,15 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	return *prate / div;
 }
 
-static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div;
 	unsigned long flags = 0;
 	u32 val;
 
-	div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+	div = parent_rate / rate;
 
 	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
 		div--;
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1ab4f7e5c7ef..62ecac53b0a2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -848,7 +848,7 @@ static void clk_change_rate(struct clk *clk)
 	old_rate = clk->rate;
 
 	if (clk->ops->set_rate)
-		clk->ops->set_rate(clk->hw, clk->new_rate);
+		clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
 
 	if (clk->ops->recalc_rate)
 		clk->rate = clk->ops->recalc_rate(clk->hw,
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 3323d24a7be4..cb82918d8fe0 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -88,19 +88,11 @@ struct clk_hw {
  * 		array index into the value programmed into the hardware.
  * 		Returns 0 on success, -EERROR otherwise.
  *
- * @set_rate:	Change the rate of this clock. If this callback returns
- * 		CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * 		parent clock (which may propagate again if the parent clock
- * 		also sets this flag). The requested rate of the parent is
- * 		passed back from the callback in the second 'unsigned long *'
- * 		argument.  Note that it is up to the hardware clock's set_rate
- * 		implementation to insure that clocks do not run out of spec
- * 		when propgating the call to set_rate up to the parent.  One way
- * 		to do this is to gate the clock (via clk_disable and/or
- * 		clk_unprepare) before calling clk_set_rate, then ungating it
- * 		afterward.  If your clock also has the CLK_GATE_SET_RATE flag
- * 		set then this will insure safety.  Returns 0 on success,
- * 		-EERROR otherwise.
+ * @set_rate:	Change the rate of this clock. The requested rate is specified
+ *		by the second argument, which should typically be the return
+ *		of .round_rate call.  The third argument gives the parent rate
+ *		which is likely helpful for most .set_rate implementation.
+ *		Returns 0 on success, -EERROR otherwise.
  *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
@@ -125,7 +117,8 @@ struct clk_ops {
 					unsigned long *);
 	int		(*set_parent)(struct clk_hw *hw, u8 index);
 	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long,
+				    unsigned long);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
cgit v1.2.3


From f4d8af2e5ae6294d5e2220d3963def6f7ffc0873 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Thu, 12 Apr 2012 20:50:19 +0800
Subject: clk: propagate round_rate for CLK_SET_RATE_PARENT case

Need to propagate round_rate call for the clk that has no .round_rate
operation but with flag CLK_SET_RATE_PARENT set.

For example, clk_mux is a clk with no .round_rate operation.  However,
it could likely be in a clk_set_rate propagation path, saying it has
parent clk who has .round_rate and .set_rate operations.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 62ecac53b0a2..c6e8866289b4 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -587,8 +587,12 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
 	if (!clk)
 		return -EINVAL;
 
-	if (!clk->ops->round_rate)
-		return clk->rate;
+	if (!clk->ops->round_rate) {
+		if (clk->flags & CLK_SET_RATE_PARENT)
+			return __clk_round_rate(clk->parent, rate);
+		else
+			return clk->rate;
+	}
 
 	if (clk->parent)
 		parent_rate = clk->parent->rate;
-- 
cgit v1.2.3


From fbc42aab543307e9bfc1dfb029db929f3fafcacd Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Tue, 17 Apr 2012 16:45:37 +0530
Subject: clk: clk-gate: Create clk_gate_endisable()

This patch tries to remove duplicate code for clk_gate clocks. This creates
another routine clk_gate_endisable() which will take care of enable/disable
clock with knowledge of CLK_GATE_SET_TO_DISABLE flag.

It works on following logic:

For enabling clock, enable = 1
	set2dis = 1	-> clear bit	-> set = 0
	set2dis = 0	-> set bit	-> set = 1

For disabling clock, enable = 0
	set2dis = 1	-> set bit	-> set = 1
	set2dis = 0	-> clear bit	-> set = 0

So, result is always: enable xor set2dis.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-gate.c | 54 +++++++++++++++++++++++---------------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 42a4b941b6e7..00216164fb9d 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -28,32 +28,38 @@
 
 #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
-static void clk_gate_set_bit(struct clk_gate *gate)
+/*
+ * It works on following logic:
+ *
+ * For enabling clock, enable = 1
+ *	set2dis = 1	-> clear bit	-> set = 0
+ *	set2dis = 0	-> set bit	-> set = 1
+ *
+ * For disabling clock, enable = 0
+ *	set2dis = 1	-> set bit	-> set = 1
+ *	set2dis = 0	-> clear bit	-> set = 0
+ *
+ * So, result is always: enable xor set2dis.
+ */
+static void clk_gate_endisable(struct clk_hw *hw, int enable)
 {
-	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+	int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
 	unsigned long flags = 0;
+	u32 reg;
+
+	set ^= enable;
 
 	if (gate->lock)
 		spin_lock_irqsave(gate->lock, flags);
 
 	reg = readl(gate->reg);
-	reg |= BIT(gate->bit_idx);
-	writel(reg, gate->reg);
-
-	if (gate->lock)
-		spin_unlock_irqrestore(gate->lock, flags);
-}
-
-static void clk_gate_clear_bit(struct clk_gate *gate)
-{
-	u32 reg;
-	unsigned long flags = 0;
 
-	if (gate->lock)
-		spin_lock_irqsave(gate->lock, flags);
+	if (set)
+		reg |= BIT(gate->bit_idx);
+	else
+		reg &= ~BIT(gate->bit_idx);
 
-	reg = readl(gate->reg);
-	reg &= ~BIT(gate->bit_idx);
 	writel(reg, gate->reg);
 
 	if (gate->lock)
@@ -62,24 +68,14 @@ static void clk_gate_clear_bit(struct clk_gate *gate)
 
 static int clk_gate_enable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
-
-	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
-		clk_gate_clear_bit(gate);
-	else
-		clk_gate_set_bit(gate);
+	clk_gate_endisable(hw, 1);
 
 	return 0;
 }
 
 static void clk_gate_disable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
-
-	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
-		clk_gate_set_bit(gate);
-	else
-		clk_gate_clear_bit(gate);
+	clk_gate_endisable(hw, 0);
 }
 
 static int clk_gate_is_enabled(struct clk_hw *hw)
-- 
cgit v1.2.3


From 1b2f99037a29d48d03ddd2fd0dc117888ec737f4 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Tue, 17 Apr 2012 16:45:38 +0530
Subject: clk: Don't set clk->new_rate twice

if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) is true, then
we don't need to set clk->new_rate here, as we will call clk_calc_subtree()
afterwards and it also sets clk->new_rate.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index c6e8866289b4..2dd20c01134d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -790,7 +790,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 
 	if (!clk->ops->round_rate) {
 		top = clk_calc_new_rates(clk->parent, rate);
-		new_rate = clk->new_rate = clk->parent->new_rate;
+		new_rate = clk->parent->new_rate;
 
 		goto out;
 	}
-- 
cgit v1.2.3


From 01033be1742abfa4359a40d21e8e8ecca39974e5 Mon Sep 17 00:00:00 2001
From: Rob Herring
Date: Mon, 9 Apr 2012 15:24:58 -0500
Subject: clk: select CLKDEV_LOOKUP for COMMON_CLK

Using the common clock infrastructure without the common clkdev code makes
little sense, so select CLKDEV_LOOKUP for COMMON_CLK.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
 drivers/clk/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1febae53..f05a60dc1a03 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -12,6 +12,7 @@ config HAVE_MACH_CLKDEV
 config COMMON_CLK
 	bool
 	select HAVE_CLK_PREPARE
+	select CLKDEV_LOOKUP
 	---help---
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an
-- 
cgit v1.2.3


From 7560e3f3581ed415828d3f431b8622fa38c2d133 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:30:06 +0100
Subject: dmaengine i.MX SDMA: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/dma/imx-sdma.c | 40 ++++++++++++++++++++++++++++------------
 1 file changed, 28 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d3e38e28bb6b..fddccae6b476 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -322,7 +322,8 @@ struct sdma_engine {
 	struct sdma_context_data	*context;
 	dma_addr_t			context_phys;
 	struct dma_device		dma_device;
-	struct clk			*clk;
+	struct clk			*clk_ipg;
+	struct clk			*clk_ahb;
 	struct mutex			channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
@@ -859,7 +860,8 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan)
 	sdmac->peripheral_type = data->peripheral_type;
 	sdmac->event_id0 = data->dma_request;
 
-	clk_enable(sdmac->sdma->clk);
+	clk_enable(sdmac->sdma->clk_ipg);
+	clk_enable(sdmac->sdma->clk_ahb);
 
 	ret = sdma_request_channel(sdmac);
 	if (ret)
@@ -896,7 +898,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys);
 
-	clk_disable(sdma->clk);
+	clk_disable(sdma->clk_ipg);
+	clk_disable(sdma->clk_ahb);
 }
 
 static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
@@ -1169,12 +1172,14 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
 	addr = (void *)header + header->script_addrs_start;
 	ram_code = (void *)header + header->ram_code_start;
 
-	clk_enable(sdma->clk);
+	clk_enable(sdma->clk_ipg);
+	clk_enable(sdma->clk_ahb);
 	/* download the RAM image for SDMA */
 	sdma_load_script(sdma, ram_code,
 			header->ram_code_size,
 			addr->ram_code_start_addr);
-	clk_disable(sdma->clk);
+	clk_disable(sdma->clk_ipg);
+	clk_disable(sdma->clk_ahb);
 
 	sdma_add_scripts(sdma, addr);
 
@@ -1216,7 +1221,8 @@ static int __init sdma_init(struct sdma_engine *sdma)
 		return -ENODEV;
 	}
 
-	clk_enable(sdma->clk);
+	clk_enable(sdma->clk_ipg);
+	clk_enable(sdma->clk_ahb);
 
 	/* Be sure SDMA has not started yet */
 	writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
@@ -1269,12 +1275,14 @@ static int __init sdma_init(struct sdma_engine *sdma)
 	/* Initializes channel's priorities */
 	sdma_set_channel_priority(&sdma->channel[0], 7);
 
-	clk_disable(sdma->clk);
+	clk_disable(sdma->clk_ipg);
+	clk_disable(sdma->clk_ahb);
 
 	return 0;
 
 err_dma_alloc:
-	clk_disable(sdma->clk);
+	clk_disable(sdma->clk_ipg);
+	clk_disable(sdma->clk_ahb);
 	dev_err(sdma->dev, "initialisation failed with %d\n", ret);
 	return ret;
 }
@@ -1313,12 +1321,21 @@ static int __init sdma_probe(struct platform_device *pdev)
 		goto err_request_region;
 	}
 
-	sdma->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(sdma->clk)) {
-		ret = PTR_ERR(sdma->clk);
+	sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(sdma->clk_ipg)) {
+		ret = PTR_ERR(sdma->clk_ipg);
 		goto err_clk;
 	}
 
+	sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(sdma->clk_ahb)) {
+		ret = PTR_ERR(sdma->clk_ahb);
+		goto err_clk;
+	}
+
+	clk_prepare(sdma->clk_ipg);
+	clk_prepare(sdma->clk_ahb);
+
 	sdma->regs = ioremap(iores->start, resource_size(iores));
 	if (!sdma->regs) {
 		ret = -ENOMEM;
@@ -1426,7 +1443,6 @@ err_alloc:
 err_request_irq:
 	iounmap(sdma->regs);
 err_ioremap:
-	clk_put(sdma->clk);
 err_clk:
 	release_mem_region(iores->start, resource_size(iores));
 err_request_region:
-- 
cgit v1.2.3


From aa29d840e3138fdf9459cc1e0101d6f25f8a48f4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:30:22 +0100
Subject: spi i.MX: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 570f22053be8..4b6688630b9c 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -85,7 +85,8 @@ struct spi_imx_data {
 	struct completion xfer_done;
 	void __iomem *base;
 	int irq;
-	struct clk *clk;
+	struct clk *clk_per;
+	struct clk *clk_ipg;
 	unsigned long spi_clk;
 
 	unsigned int count;
@@ -845,15 +846,22 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 		goto out_iounmap;
 	}
 
-	spi_imx->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(spi_imx->clk)) {
-		dev_err(&pdev->dev, "unable to get clock\n");
-		ret = PTR_ERR(spi_imx->clk);
+	spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(spi_imx->clk_ipg)) {
+		ret = PTR_ERR(spi_imx->clk_ipg);
 		goto out_free_irq;
 	}
 
-	clk_enable(spi_imx->clk);
-	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+	spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(spi_imx->clk_per)) {
+		ret = PTR_ERR(spi_imx->clk_per);
+		goto out_free_irq;
+	}
+
+	clk_prepare_enable(spi_imx->clk_per);
+	clk_prepare_enable(spi_imx->clk_ipg);
+
+	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
 
 	spi_imx->devtype_data->reset(spi_imx);
 
@@ -871,8 +879,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	return ret;
 
 out_clk_put:
-	clk_disable(spi_imx->clk);
-	clk_put(spi_imx->clk);
+	clk_disable_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
 out_free_irq:
 	free_irq(spi_imx->irq, spi_imx);
 out_iounmap:
@@ -900,8 +908,8 @@ static int __devexit spi_imx_remove(struct platform_device *pdev)
 	spi_bitbang_stop(&spi_imx->bitbang);
 
 	writel(0, spi_imx->base + MXC_CSPICTRL);
-	clk_disable(spi_imx->clk);
-	clk_put(spi_imx->clk);
+	clk_disable_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
 	free_irq(spi_imx->irq, spi_imx);
 	iounmap(spi_imx->base);
 
-- 
cgit v1.2.3


From 13aaea03b9e33af420a327b7ab800332d6fbabf5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:30:36 +0100
Subject: video imxfb: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/video/imxfb.c | 50 +++++++++++++++++++++++++++++++++++---------------
 1 file changed, 35 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index f135dbead07d..caad3689b4e6 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -131,7 +131,9 @@ struct imxfb_rgb {
 struct imxfb_info {
 	struct platform_device  *pdev;
 	void __iomem		*regs;
-	struct clk		*clk;
+	struct clk		*clk_ipg;
+	struct clk		*clk_ahb;
+	struct clk		*clk_per;
 
 	/*
 	 * These are the addresses we mapped
@@ -340,7 +342,7 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 
 	pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
 
-	lcd_clk = clk_get_rate(fbi->clk);
+	lcd_clk = clk_get_rate(fbi->clk_per);
 
 	tmp = var->pixclock * (unsigned long long)lcd_clk;
 
@@ -455,11 +457,17 @@ static int imxfb_bl_update_status(struct backlight_device *bl)
 
 	fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
 
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
-		clk_enable(fbi->clk);
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
+		clk_prepare_enable(fbi->clk_ipg);
+		clk_prepare_enable(fbi->clk_ahb);
+		clk_prepare_enable(fbi->clk_per);
+	}
 	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
-		clk_disable(fbi->clk);
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK) {
+		clk_disable_unprepare(fbi->clk_per);
+		clk_disable_unprepare(fbi->clk_ahb);
+		clk_disable_unprepare(fbi->clk_ipg);
+	}
 
 	return 0;
 }
@@ -522,7 +530,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	 */
 	writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
 
-	clk_enable(fbi->clk);
+	clk_prepare_enable(fbi->clk_ipg);
+	clk_prepare_enable(fbi->clk_ahb);
+	clk_prepare_enable(fbi->clk_per);
 
 	if (fbi->backlight_power)
 		fbi->backlight_power(1);
@@ -539,7 +549,9 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
 	if (fbi->lcd_power)
 		fbi->lcd_power(0);
 
-	clk_disable(fbi->clk);
+	clk_disable_unprepare(fbi->clk_per);
+	clk_disable_unprepare(fbi->clk_ipg);
+	clk_disable_unprepare(fbi->clk_ahb);
 
 	writel(0, fbi->regs + LCDC_RMCR);
 }
@@ -770,10 +782,21 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		goto failed_req;
 	}
 
-	fbi->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(fbi->clk)) {
-		ret = PTR_ERR(fbi->clk);
-		dev_err(&pdev->dev, "unable to get clock: %d\n", ret);
+	fbi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(fbi->clk_ipg)) {
+		ret = PTR_ERR(fbi->clk_ipg);
+		goto failed_getclock;
+	}
+
+	fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(fbi->clk_ahb)) {
+		ret = PTR_ERR(fbi->clk_ahb);
+		goto failed_getclock;
+	}
+
+	fbi->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(fbi->clk_per)) {
+		ret = PTR_ERR(fbi->clk_per);
 		goto failed_getclock;
 	}
 
@@ -858,7 +881,6 @@ failed_platform_init:
 failed_map:
 	iounmap(fbi->regs);
 failed_ioremap:
-	clk_put(fbi->clk);
 failed_getclock:
 	release_mem_region(res->start, resource_size(res));
 failed_req:
@@ -895,8 +917,6 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	iounmap(fbi->regs);
 	release_mem_region(res->start, resource_size(res));
-	clk_disable(fbi->clk);
-	clk_put(fbi->clk);
 
 	platform_set_drvdata(pdev, NULL);
 
-- 
cgit v1.2.3


From f4d40de39a23f0c39cca55ac63e1175c69c3d2f7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:30:49 +0100
Subject: net fec: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/net/ethernet/freescale/fec.c | 35 +++++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index a12b3f5bc025..b2494637cb60 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -206,7 +206,8 @@ struct fec_enet_private {
 
 	struct net_device *netdev;
 
-	struct clk *clk;
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
 
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
 	unsigned char *tx_bounce[TX_RING_SIZE];
@@ -1064,7 +1065,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	 * Reference Manual has an error on this, and gets fixed on i.MX6Q
 	 * document.
 	 */
-	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000);
+	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ahb), 5000000);
 	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
 		fep->phy_speed--;
 	fep->phy_speed <<= 1;
@@ -1609,12 +1610,20 @@ fec_probe(struct platform_device *pdev)
 		}
 	}
 
-	fep->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(fep->clk)) {
-		ret = PTR_ERR(fep->clk);
+	fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(fep->clk_ipg)) {
+		ret = PTR_ERR(fep->clk_ipg);
 		goto failed_clk;
 	}
-	clk_prepare_enable(fep->clk);
+
+	fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(fep->clk_ahb)) {
+		ret = PTR_ERR(fep->clk_ahb);
+		goto failed_clk;
+	}
+
+	clk_prepare_enable(fep->clk_ahb);
+	clk_prepare_enable(fep->clk_ipg);
 
 	ret = fec_enet_init(ndev);
 	if (ret)
@@ -1637,8 +1646,8 @@ failed_register:
 	fec_enet_mii_remove(fep);
 failed_mii_init:
 failed_init:
-	clk_disable_unprepare(fep->clk);
-	clk_put(fep->clk);
+	clk_disable_unprepare(fep->clk_ahb);
+	clk_disable_unprepare(fep->clk_ipg);
 failed_clk:
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
 		irq = platform_get_irq(pdev, i);
@@ -1670,8 +1679,8 @@ fec_drv_remove(struct platform_device *pdev)
 		if (irq > 0)
 			free_irq(irq, ndev);
 	}
-	clk_disable_unprepare(fep->clk);
-	clk_put(fep->clk);
+	clk_disable_unprepare(fep->clk_ahb);
+	clk_disable_unprepare(fep->clk_ipg);
 	iounmap(fep->hwp);
 	free_netdev(ndev);
 
@@ -1695,7 +1704,8 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
-	clk_disable_unprepare(fep->clk);
+	clk_disable_unprepare(fep->clk_ahb);
+	clk_disable_unprepare(fep->clk_ipg);
 
 	return 0;
 }
@@ -1706,7 +1716,8 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
-	clk_prepare_enable(fep->clk);
+	clk_prepare_enable(fep->clk_ahb);
+	clk_prepare_enable(fep->clk_ipg);
 	if (netif_running(ndev)) {
 		fec_restart(ndev, fep->full_duplex);
 		netif_device_attach(ndev);
-- 
cgit v1.2.3


From 529aa29e033f3bcd3346de1532e4bd5ff969fd0d Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:31:14 +0100
Subject: mmc mxcmmc: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mmc/host/mxcmmc.c | 39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index b2058b432320..28ed52d58f7f 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -136,7 +136,8 @@ struct mxcmci_host {
 	u16			rev_no;
 	unsigned int		cmdat;
 
-	struct clk		*clk;
+	struct clk		*clk_ipg;
+	struct clk		*clk_per;
 
 	int			clock;
 
@@ -672,7 +673,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
 {
 	unsigned int divider;
 	int prescaler = 0;
-	unsigned int clk_in = clk_get_rate(host->clk);
+	unsigned int clk_in = clk_get_rate(host->clk_per);
 
 	while (prescaler <= 0x800) {
 		for (divider = 1; divider <= 0xF; divider++) {
@@ -900,12 +901,20 @@ static int mxcmci_probe(struct platform_device *pdev)
 	host->res = r;
 	host->irq = irq;
 
-	host->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(host->clk)) {
-		ret = PTR_ERR(host->clk);
+	host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(host->clk_ipg)) {
+		ret = PTR_ERR(host->clk_ipg);
 		goto out_iounmap;
 	}
-	clk_enable(host->clk);
+
+	host->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(host->clk_per)) {
+		ret = PTR_ERR(host->clk_per);
+		goto out_iounmap;
+	}
+
+	clk_prepare_enable(host->clk_per);
+	clk_prepare_enable(host->clk_ipg);
 
 	mxcmci_softreset(host);
 
@@ -917,8 +926,8 @@ static int mxcmci_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	mmc->f_min = clk_get_rate(host->clk) >> 16;
-	mmc->f_max = clk_get_rate(host->clk) >> 1;
+	mmc->f_min = clk_get_rate(host->clk_per) >> 16;
+	mmc->f_max = clk_get_rate(host->clk_per) >> 1;
 
 	/* recommended in data sheet */
 	writew(0x2db4, host->base + MMC_REG_READ_TO);
@@ -967,8 +976,8 @@ out_free_dma:
 	if (host->dma)
 		dma_release_channel(host->dma);
 out_clk_put:
-	clk_disable(host->clk);
-	clk_put(host->clk);
+	clk_disable_unprepare(host->clk_per);
+	clk_disable_unprepare(host->clk_ipg);
 out_iounmap:
 	iounmap(host->base);
 out_free:
@@ -999,8 +1008,8 @@ static int mxcmci_remove(struct platform_device *pdev)
 	if (host->dma)
 		dma_release_channel(host->dma);
 
-	clk_disable(host->clk);
-	clk_put(host->clk);
+	clk_disable_unprepare(host->clk_per);
+	clk_disable_unprepare(host->clk_ipg);
 
 	release_mem_region(host->res->start, resource_size(host->res));
 
@@ -1018,7 +1027,8 @@ static int mxcmci_suspend(struct device *dev)
 
 	if (mmc)
 		ret = mmc_suspend_host(mmc);
-	clk_disable(host->clk);
+	clk_disable_unprepare(host->clk_per);
+	clk_disable_unprepare(host->clk_ipg);
 
 	return ret;
 }
@@ -1029,7 +1039,8 @@ static int mxcmci_resume(struct device *dev)
 	struct mxcmci_host *host = mmc_priv(mmc);
 	int ret = 0;
 
-	clk_enable(host->clk);
+	clk_prepare_enable(host->clk_per);
+	clk_prepare_enable(host->clk_ipg);
 	if (mmc)
 		ret = mmc_resume_host(mmc);
 
-- 
cgit v1.2.3


From 52dac6150580f356a96b9a49715f6234fbf00d3a Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:31:34 +0100
Subject: mmc sdhc i.MX: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 42 ++++++++++++++++++++++++++++----------
 1 file changed, 31 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 8abdaf6697a8..ce83d6191f4a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -69,6 +69,9 @@ struct pltfm_imx_data {
 	u32 scratchpad;
 	enum imx_esdhc_type devtype;
 	struct esdhc_platform_data boarddata;
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
 };
 
 static struct platform_device_id imx_esdhc_devtype[] = {
@@ -437,7 +440,6 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_host *host;
 	struct esdhc_platform_data *boarddata;
-	struct clk *clk;
 	int err;
 	struct pltfm_imx_data *imx_data;
 
@@ -458,14 +460,29 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	imx_data->devtype = pdev->id_entry->driver_data;
 	pltfm_host->priv = imx_data;
 
-	clk = clk_get(mmc_dev(host->mmc), NULL);
-	if (IS_ERR(clk)) {
-		dev_err(mmc_dev(host->mmc), "clk err\n");
-		err = PTR_ERR(clk);
+	imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx_data->clk_ipg)) {
+		err = PTR_ERR(imx_data->clk_ipg);
 		goto err_clk_get;
 	}
-	clk_prepare_enable(clk);
-	pltfm_host->clk = clk;
+
+	imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(imx_data->clk_ahb)) {
+		err = PTR_ERR(imx_data->clk_ahb);
+		goto err_clk_get;
+	}
+
+	imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx_data->clk_per)) {
+		err = PTR_ERR(imx_data->clk_per);
+		goto err_clk_get;
+	}
+
+	pltfm_host->clk = imx_data->clk_per;
+
+	clk_prepare_enable(imx_data->clk_per);
+	clk_prepare_enable(imx_data->clk_ipg);
+	clk_prepare_enable(imx_data->clk_ahb);
 
 	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
@@ -558,8 +575,9 @@ no_card_detect_irq:
 		gpio_free(boarddata->wp_gpio);
 no_card_detect_pin:
 no_board_data:
-	clk_disable_unprepare(pltfm_host->clk);
-	clk_put(pltfm_host->clk);
+	clk_disable_unprepare(imx_data->clk_per);
+	clk_disable_unprepare(imx_data->clk_ipg);
+	clk_disable_unprepare(imx_data->clk_ahb);
 err_clk_get:
 	kfree(imx_data);
 err_imx_data:
@@ -585,8 +603,10 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
 		gpio_free(boarddata->cd_gpio);
 	}
 
-	clk_disable_unprepare(pltfm_host->clk);
-	clk_put(pltfm_host->clk);
+	clk_disable_unprepare(imx_data->clk_per);
+	clk_disable_unprepare(imx_data->clk_ipg);
+	clk_disable_unprepare(imx_data->clk_ahb);
+
 	kfree(imx_data);
 
 	sdhci_pltfm_free(pdev);
-- 
cgit v1.2.3


From 3a9465fa2dc42a8ebc2fe9144f4dfa23d5899f85 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 09:31:43 +0100
Subject: serial i.MX: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/tty/serial/imx.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e7feceeebc2f..267ec6da5af2 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -204,7 +204,8 @@ struct imx_port {
 	unsigned int		irda_inv_rx:1;
 	unsigned int		irda_inv_tx:1;
 	unsigned short		trcv_delay; /* transceiver delay */
-	struct clk		*clk;
+	struct clk		*clk_ipg;
+	struct clk		*clk_per;
 	struct imx_uart_data	*devdata;
 };
 
@@ -672,7 +673,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	 * RFDIV is set such way to satisfy requested uartclk value
 	 */
 	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+	ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
 			/ sport->port.uartclk;
 
 	if(!ufcr_rfdiv)
@@ -1285,7 +1286,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 		else
 			ucfr_rfdiv = 6 - ucfr_rfdiv;
 
-		uartclk = clk_get_rate(sport->clk);
+		uartclk = clk_get_rate(sport->clk_per);
 		uartclk /= ucfr_rfdiv;
 
 		{	/*
@@ -1503,14 +1504,22 @@ static int serial_imx_probe(struct platform_device *pdev)
 	sport->timer.function = imx_timeout;
 	sport->timer.data     = (unsigned long)sport;
 
-	sport->clk = clk_get(&pdev->dev, "uart");
-	if (IS_ERR(sport->clk)) {
-		ret = PTR_ERR(sport->clk);
+	sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(sport->clk_ipg)) {
+		ret = PTR_ERR(sport->clk_ipg);
 		goto unmap;
 	}
-	clk_prepare_enable(sport->clk);
 
-	sport->port.uartclk = clk_get_rate(sport->clk);
+	sport->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(sport->clk_per)) {
+		ret = PTR_ERR(sport->clk_per);
+		goto unmap;
+	}
+
+	clk_prepare_enable(sport->clk_per);
+	clk_prepare_enable(sport->clk_ipg);
+
+	sport->port.uartclk = clk_get_rate(sport->clk_per);
 
 	imx_ports[sport->port.line] = sport;
 
@@ -1531,8 +1540,8 @@ deinit:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
-	clk_disable_unprepare(sport->clk);
-	clk_put(sport->clk);
+	clk_disable_unprepare(sport->clk_per);
+	clk_disable_unprepare(sport->clk_ipg);
 unmap:
 	iounmap(sport->port.membase);
 free:
@@ -1550,11 +1559,10 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	if (sport) {
-		uart_remove_one_port(&imx_reg, &sport->port);
-		clk_disable_unprepare(sport->clk);
-		clk_put(sport->clk);
-	}
+	uart_remove_one_port(&imx_reg, &sport->port);
+
+	clk_disable_unprepare(sport->clk_per);
+	clk_disable_unprepare(sport->clk_ipg);
 
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
-- 
cgit v1.2.3


From 97c3213fd9fc28c0e86b69df09f4228424cafecc Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 20:56:35 +0100
Subject: mtd mxc_nand: prepare/unprepare clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/mxc_nand.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index cc0678a967c1..9e374e9bd296 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -690,7 +690,7 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
 	if (chip == -1) {
 		/* Disable the NFC clock */
 		if (host->clk_act) {
-			clk_disable(host->clk);
+			clk_disable_unprepare(host->clk);
 			host->clk_act = 0;
 		}
 		return;
@@ -698,7 +698,7 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
 
 	if (!host->clk_act) {
 		/* Enable the NFC clock */
-		clk_enable(host->clk);
+		clk_prepare_enable(host->clk);
 		host->clk_act = 1;
 	}
 
@@ -1078,7 +1078,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto eclk;
 	}
 
-	clk_enable(host->clk);
+	clk_prepare_enable(host->clk);
 	host->clk_act = 1;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- 
cgit v1.2.3


From 198ad2cecde16ce309a65f2fddd5f6d3442f8250 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 20:58:21 +0100
Subject: USB ehci mxc: prepare/unprepare clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/host/ehci-mxc.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index a797d51ecbe8..ae16c346389c 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -171,7 +171,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		ret = PTR_ERR(priv->usbclk);
 		goto err_clk;
 	}
-	clk_enable(priv->usbclk);
+	clk_prepare_enable(priv->usbclk);
 
 	if (!cpu_is_mx35() && !cpu_is_mx25()) {
 		priv->ahbclk = clk_get(dev, "usb_ahb");
@@ -179,7 +179,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 			ret = PTR_ERR(priv->ahbclk);
 			goto err_clk_ahb;
 		}
-		clk_enable(priv->ahbclk);
+		clk_prepare_enable(priv->ahbclk);
 	}
 
 	/* "dr" device has its own clock on i.MX51 */
@@ -189,7 +189,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 			ret = PTR_ERR(priv->phy1clk);
 			goto err_clk_phy;
 		}
-		clk_enable(priv->phy1clk);
+		clk_prepare_enable(priv->phy1clk);
 	}
 
 
@@ -266,16 +266,16 @@ err_add:
 		pdata->exit(pdev);
 err_init:
 	if (priv->phy1clk) {
-		clk_disable(priv->phy1clk);
+		clk_disable_unprepare(priv->phy1clk);
 		clk_put(priv->phy1clk);
 	}
 err_clk_phy:
 	if (priv->ahbclk) {
-		clk_disable(priv->ahbclk);
+		clk_disable_unprepare(priv->ahbclk);
 		clk_put(priv->ahbclk);
 	}
 err_clk_ahb:
-	clk_disable(priv->usbclk);
+	clk_disable_unprepare(priv->usbclk);
 	clk_put(priv->usbclk);
 err_clk:
 	iounmap(hcd->regs);
@@ -307,14 +307,14 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 	usb_put_hcd(hcd);
 	platform_set_drvdata(pdev, NULL);
 
-	clk_disable(priv->usbclk);
+	clk_disable_unprepare(priv->usbclk);
 	clk_put(priv->usbclk);
 	if (priv->ahbclk) {
-		clk_disable(priv->ahbclk);
+		clk_disable_unprepare(priv->ahbclk);
 		clk_put(priv->ahbclk);
 	}
 	if (priv->phy1clk) {
-		clk_disable(priv->phy1clk);
+		clk_disable_unprepare(priv->phy1clk);
 		clk_put(priv->phy1clk);
 	}
 
-- 
cgit v1.2.3


From c943740ccd7ccfc7e92c80d194d0a8a80ab7b55c Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 25 Apr 2012 16:39:06 +0200
Subject: USB ehci mxc: sanitize clock handling

Every i.MX ehci controller has a ahb and a ipg clock, so request
it on every SoC. Do not make a special case for the usb phy clock
of the i.MX51. Just request it but make it optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/host/ehci-mxc.c | 56 +++++++++++++++++++--------------------------
 1 file changed, 24 insertions(+), 32 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index ae16c346389c..c778ffe4e4e5 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -32,7 +32,7 @@
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
-	struct clk *usbclk, *ahbclk, *phy1clk;
+	struct clk *usbclk, *ahbclk, *phyclk;
 	struct usb_hcd *hcd;
 };
 
@@ -166,31 +166,26 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	}
 
 	/* enable clocks */
-	priv->usbclk = clk_get(dev, "usb");
+	priv->usbclk = clk_get(dev, "ipg");
 	if (IS_ERR(priv->usbclk)) {
 		ret = PTR_ERR(priv->usbclk);
 		goto err_clk;
 	}
 	clk_prepare_enable(priv->usbclk);
 
-	if (!cpu_is_mx35() && !cpu_is_mx25()) {
-		priv->ahbclk = clk_get(dev, "usb_ahb");
-		if (IS_ERR(priv->ahbclk)) {
-			ret = PTR_ERR(priv->ahbclk);
-			goto err_clk_ahb;
-		}
-		clk_prepare_enable(priv->ahbclk);
+	priv->ahbclk = clk_get(dev, "ahb");
+	if (IS_ERR(priv->ahbclk)) {
+		ret = PTR_ERR(priv->ahbclk);
+		goto err_clk_ahb;
 	}
+	clk_prepare_enable(priv->ahbclk);
 
 	/* "dr" device has its own clock on i.MX51 */
-	if (cpu_is_mx51() && (pdev->id == 0)) {
-		priv->phy1clk = clk_get(dev, "usb_phy1");
-		if (IS_ERR(priv->phy1clk)) {
-			ret = PTR_ERR(priv->phy1clk);
-			goto err_clk_phy;
-		}
-		clk_prepare_enable(priv->phy1clk);
-	}
+	priv->phyclk = clk_get(dev, "phy");
+	if (IS_ERR(priv->phyclk))
+		priv->phyclk = NULL;
+	if (priv->phyclk)
+		clk_prepare_enable(priv->phyclk);
 
 
 	/* call platform specific init function */
@@ -265,15 +260,13 @@ err_add:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 err_init:
-	if (priv->phy1clk) {
-		clk_disable_unprepare(priv->phy1clk);
-		clk_put(priv->phy1clk);
-	}
-err_clk_phy:
-	if (priv->ahbclk) {
-		clk_disable_unprepare(priv->ahbclk);
-		clk_put(priv->ahbclk);
+	if (priv->phyclk) {
+		clk_disable_unprepare(priv->phyclk);
+		clk_put(priv->phyclk);
 	}
+
+	clk_disable_unprepare(priv->ahbclk);
+	clk_put(priv->ahbclk);
 err_clk_ahb:
 	clk_disable_unprepare(priv->usbclk);
 	clk_put(priv->usbclk);
@@ -309,13 +302,12 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(priv->usbclk);
 	clk_put(priv->usbclk);
-	if (priv->ahbclk) {
-		clk_disable_unprepare(priv->ahbclk);
-		clk_put(priv->ahbclk);
-	}
-	if (priv->phy1clk) {
-		clk_disable_unprepare(priv->phy1clk);
-		clk_put(priv->phy1clk);
+	clk_disable_unprepare(priv->ahbclk);
+	clk_put(priv->ahbclk);
+
+	if (priv->phyclk) {
+		clk_disable_unprepare(priv->phyclk);
+		clk_put(priv->phyclk);
 	}
 
 	kfree(priv);
-- 
cgit v1.2.3


From 60178b6329259457013d0e39cbee22aec0230dfb Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 7 Mar 2012 20:59:36 +0100
Subject: w1 i.MX: prepare/unprepare clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/w1/masters/mxc_w1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index a3b6a74c67a7..1cc61a700fa8 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -138,7 +138,7 @@ static int __devinit mxc_w1_probe(struct platform_device *pdev)
 		goto failed_ioremap;
 	}
 
-	clk_enable(mdev->clk);
+	clk_prepare_enable(mdev->clk);
 	__raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER);
 
 	mdev->bus_master.data = mdev;
@@ -178,7 +178,7 @@ static int __devexit mxc_w1_remove(struct platform_device *pdev)
 
 	iounmap(mdev->regs);
 	release_mem_region(res->start, resource_size(res));
-	clk_disable(mdev->clk);
+	clk_disable_unprepare(mdev->clk);
 	clk_put(mdev->clk);
 
 	platform_set_drvdata(pdev, NULL);
-- 
cgit v1.2.3


From 4e7b6c9a6b4700cf121a0d5924f193db83cbd008 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Tue, 3 Apr 2012 12:34:57 +0200
Subject: watchdog imx2: prepare clk before enabling it

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/watchdog/imx2_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 7a2b734fcdc7..bcfab2b00ad2 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -121,7 +121,7 @@ static void imx2_wdt_start(void)
 {
 	if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
 		/* at our first start we enable clock and do initialisations */
-		clk_enable(imx2_wdt.clk);
+		clk_prepare_enable(imx2_wdt.clk);
 
 		imx2_wdt_setup();
 	} else	/* delete the timer that pings the watchdog after close */
-- 
cgit v1.2.3


From fdf7748b9f8d392a086560616bf112f0ba0c1f71 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Tue, 3 Apr 2012 12:35:16 +0200
Subject: media mx3 camera: prepare clk before enabling it

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/media/video/mx3_camera.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 93c35ef5f0ad..e2e33df868de 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -508,7 +508,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 	/* ipu_csi_init_interface() */
 	csi_reg_write(mx3_cam, conf, CSI_SENS_CONF);
 
-	clk_enable(mx3_cam->clk);
+	clk_prepare_enable(mx3_cam->clk);
 	rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
 	dev_dbg(icd->parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
 	if (rate)
@@ -549,7 +549,7 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 		*ichan = NULL;
 	}
 
-	clk_disable(mx3_cam->clk);
+	clk_disable_unprepare(mx3_cam->clk);
 
 	mx3_cam->icd = NULL;
 
-- 
cgit v1.2.3


From 4fa030a43ddb0d8fe3f2530d6162c11a3b3d31de Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Sun, 18 Mar 2012 23:48:13 +0100
Subject: dmaengine i.MX ipu: clk_prepare/unprepare clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/dma/ipu/ipu_idmac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 62e3f8ec2461..5ec72044ea4c 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1715,7 +1715,7 @@ static int __init ipu_probe(struct platform_device *pdev)
 	}
 
 	/* Make sure IPU HSP clock is running */
-	clk_enable(ipu_data.ipu_clk);
+	clk_prepare_enable(ipu_data.ipu_clk);
 
 	/* Disable all interrupts */
 	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
@@ -1747,7 +1747,7 @@ static int __init ipu_probe(struct platform_device *pdev)
 err_idmac_init:
 err_attach_irq:
 	ipu_irq_detach_irq(&ipu_data, pdev);
-	clk_disable(ipu_data.ipu_clk);
+	clk_disable_unprepare(ipu_data.ipu_clk);
 	clk_put(ipu_data.ipu_clk);
 err_clk_get:
 	iounmap(ipu_data.reg_ic);
@@ -1765,7 +1765,7 @@ static int __exit ipu_remove(struct platform_device *pdev)
 
 	ipu_idmac_exit(ipu);
 	ipu_irq_detach_irq(ipu, pdev);
-	clk_disable(ipu->ipu_clk);
+	clk_disable_unprepare(ipu->ipu_clk);
 	clk_put(ipu->ipu_clk);
 	iounmap(ipu->reg_ic);
 	iounmap(ipu->reg_ipu);
-- 
cgit v1.2.3


From 4ec8c7f52654cdbb13770d04dc76f9a4615cd4e1 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Wed, 25 Apr 2012 16:35:16 +0200
Subject: rtc: imx dryice: Add missing clk_prepare

prepare the clock before enabling it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/rtc/rtc-imxdi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index d93a9608b1f0..891cd6c61d0a 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -405,7 +405,7 @@ static int dryice_rtc_probe(struct platform_device *pdev)
 	imxdi->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(imxdi->clk))
 		return PTR_ERR(imxdi->clk);
-	clk_enable(imxdi->clk);
+	clk_prepare_enable(imxdi->clk);
 
 	/*
 	 * Initialize dryice hardware
@@ -470,7 +470,7 @@ static int dryice_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 err:
-	clk_disable(imxdi->clk);
+	clk_disable_unprepare(imxdi->clk);
 	clk_put(imxdi->clk);
 
 	return rc;
@@ -487,7 +487,7 @@ static int __devexit dryice_rtc_remove(struct platform_device *pdev)
 
 	rtc_device_unregister(imxdi->rtc);
 
-	clk_disable(imxdi->clk);
+	clk_disable_unprepare(imxdi->clk);
 	clk_put(imxdi->clk);
 
 	return 0;
-- 
cgit v1.2.3


From 0197b3ea0f66cd2a11417f58fe1812858ea77908 Mon Sep 17 00:00:00 2001
From: Saravana Kannan
Date: Wed, 25 Apr 2012 22:58:56 -0700
Subject: clk: Use a separate struct for holding init data.

Create a struct clk_init_data to hold all data that needs to be passed from
the platfrom specific driver to the common clock framework during clock
registration. Add a pointer to this struct inside clk_hw.

This has several advantages:
* Completely hides struct clk from many clock platform drivers and static
  clock initialization code that don't care for static initialization of
  the struct clks.
* For platforms that want to do complete static initialization, it removed
  the need to directly mess with the struct clk's fields while still
  allowing to statically allocate struct clk. This keeps the code more
  future proof even if they include clk-private.h.
* Simplifies the generic clk_register() function and allows adding optional
  fields in the future without modifying the function signature.
* Simplifies the static initialization of clocks on all platforms by
  removing the need for forward delcarations or convoluted macros.

Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
[mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergman <arnd.bergmann@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Richard Zhao <richard.zhao@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Deepak Saxena <dsaxena@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/clk/clk-divider.c    | 14 ++++---
 drivers/clk/clk-fixed-rate.c | 14 ++++---
 drivers/clk/clk-gate.c       | 15 +++++---
 drivers/clk/clk-mux.c        | 10 ++++-
 drivers/clk/clk.c            | 89 +++++++++++++++++++++++++++-----------------
 include/linux/clk-private.h  |  2 +
 include/linux/clk-provider.h | 59 ++++++++++++++++++-----------
 7 files changed, 129 insertions(+), 74 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 90627e4069af..8ea11b444528 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -167,6 +167,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 {
 	struct clk_divider *div;
 	struct clk *clk;
+	struct clk_init_data init;
 
 	/* allocate the divider */
 	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
@@ -175,19 +176,22 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_divider_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_divider assignments */
 	div->reg = reg;
 	div->shift = shift;
 	div->width = width;
 	div->flags = clk_divider_flags;
 	div->lock = lock;
+	div->hw.init = &init;
 
 	/* register the clock */
-	clk = clk_register(dev, name,
-			&clk_divider_ops, &div->hw,
-			(parent_name ? &parent_name: NULL),
-			(parent_name ? 1 : 0),
-			flags);
+	clk = clk_register(dev, &div->hw);
 
 	if (IS_ERR(clk))
 		kfree(div);
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index b555a04c8df8..cbd246229786 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -52,6 +52,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 {
 	struct clk_fixed_rate *fixed;
 	struct clk *clk;
+	struct clk_init_data init;
 
 	/* allocate fixed-rate clock */
 	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
@@ -60,15 +61,18 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_fixed_rate assignments */
 	fixed->fixed_rate = fixed_rate;
+	fixed->hw.init = &init;
 
 	/* register the clock */
-	clk = clk_register(dev, name,
-			&clk_fixed_rate_ops, &fixed->hw,
-			(parent_name ? &parent_name : NULL),
-			(parent_name ? 1 : 0),
-			flags);
+	clk = clk_register(dev, &fixed->hw);
 
 	if (IS_ERR(clk))
 		kfree(fixed);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 00216164fb9d..578465e04be6 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -119,6 +119,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 {
 	struct clk_gate *gate;
 	struct clk *clk;
+	struct clk_init_data init;
 
 	/* allocate the gate */
 	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
@@ -127,18 +128,20 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_gate_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_gate assignments */
 	gate->reg = reg;
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate_flags;
 	gate->lock = lock;
+	gate->hw.init = &init;
 
-	/* register the clock */
-	clk = clk_register(dev, name,
-			&clk_gate_ops, &gate->hw,
-			(parent_name ? &parent_name : NULL),
-			(parent_name ? 1 : 0),
-			flags);
+	clk = clk_register(dev, &gate->hw);
 
 	if (IS_ERR(clk))
 		kfree(gate);
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 6e58f11ab81f..8e97491902e7 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -95,6 +95,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 {
 	struct clk_mux *mux;
 	struct clk *clk;
+	struct clk_init_data init;
 
 	/* allocate the mux */
 	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
@@ -103,6 +104,12 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_mux_ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
 	/* struct clk_mux assignments */
 	mux->reg = reg;
 	mux->shift = shift;
@@ -110,8 +117,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
 
-	clk = clk_register(dev, name, &clk_mux_ops, &mux->hw,
-			parent_names, num_parents, flags);
+	clk = clk_register(dev, &mux->hw);
 
 	if (IS_ERR(clk))
 		kfree(mux);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2dd20c01134d..c81803b9ba35 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1169,26 +1169,6 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
  *
  * Initializes the lists in struct clk, queries the hardware for the
  * parent and rate and sets them both.
- *
- * Any struct clk passed into __clk_init must have the following members
- * populated:
- * 	.name
- * 	.ops
- * 	.hw
- * 	.parent_names
- * 	.num_parents
- * 	.flags
- *
- * Essentially, everything that would normally be passed into clk_register is
- * assumed to be initialized already in __clk_init.  The other members may be
- * populated, but are optional.
- *
- * __clk_init is only exposed via clk-private.h and is intended for use with
- * very large numbers of clocks that need to be statically initialized.  It is
- * a layering violation to include clk-private.h from any code which implements
- * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.  Returns 0
- * on success, otherwise an error code.
  */
 int __clk_init(struct device *dev, struct clk *clk)
 {
@@ -1320,15 +1300,48 @@ out:
 	return ret;
 }
 
+/**
+ * __clk_register - register a clock and return a cookie.
+ *
+ * Same as clk_register, except that the .clk field inside hw shall point to a
+ * preallocated (generally statically allocated) struct clk. None of the fields
+ * of the struct clk need to be initialized.
+ *
+ * The data pointed to by .init and .clk field shall NOT be marked as init
+ * data.
+ *
+ * __clk_register is only exposed via clk-private.h and is intended for use with
+ * very large numbers of clocks that need to be statically initialized.  It is
+ * a layering violation to include clk-private.h from any code which implements
+ * a clock's .ops; as such any statically initialized clock data MUST be in a
+ * separate C file from the logic that implements it's operations.  Returns 0
+ * on success, otherwise an error code.
+ */
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
+{
+	int ret;
+	struct clk *clk;
+
+	clk = hw->clk;
+	clk->name = hw->init->name;
+	clk->ops = hw->init->ops;
+	clk->hw = hw;
+	clk->flags = hw->init->flags;
+	clk->parent_names = hw->init->parent_names;
+	clk->num_parents = hw->init->num_parents;
+
+	ret = __clk_init(dev, clk);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return clk;
+}
+EXPORT_SYMBOL_GPL(__clk_register);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
  * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
  *
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
@@ -1336,9 +1349,7 @@ out:
  * rest of the clock API.  In the event of an error clk_register will return an
  * error code; drivers must test for an error code after calling clk_register.
  */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		const char **parent_names, u8 num_parents, unsigned long flags)
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 {
 	int i, ret;
 	struct clk *clk;
@@ -1350,15 +1361,20 @@ struct clk *clk_register(struct device *dev, const char *name,
 		goto fail_out;
 	}
 
-	clk->name = name;
-	clk->ops = ops;
+	clk->name = kstrdup(hw->init->name, GFP_KERNEL);
+	if (!clk->name) {
+		pr_err("%s: could not allocate clk->name\n", __func__);
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+	clk->ops = hw->init->ops;
 	clk->hw = hw;
-	clk->flags = flags;
-	clk->num_parents = num_parents;
+	clk->flags = hw->init->flags;
+	clk->num_parents = hw->init->num_parents;
 	hw->clk = clk;
 
 	/* allocate local copy in case parent_names is __initdata */
-	clk->parent_names = kzalloc((sizeof(char*) * num_parents),
+	clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents),
 			GFP_KERNEL);
 
 	if (!clk->parent_names) {
@@ -1369,8 +1385,9 @@ struct clk *clk_register(struct device *dev, const char *name,
 
 
 	/* copy each string name in case parent_names is __initdata */
-	for (i = 0; i < num_parents; i++) {
-		clk->parent_names[i] = kstrdup(parent_names[i], GFP_KERNEL);
+	for (i = 0; i < clk->num_parents; i++) {
+		clk->parent_names[i] = kstrdup(hw->init->parent_names[i],
+						GFP_KERNEL);
 		if (!clk->parent_names[i]) {
 			pr_err("%s: could not copy parent_names\n", __func__);
 			ret = -ENOMEM;
@@ -1387,6 +1404,8 @@ fail_parent_names_copy:
 		kfree(clk->parent_names[i]);
 	kfree(clk->parent_names);
 fail_parent_names:
+	kfree(clk->name);
+fail_name:
 	kfree(clk);
 fail_out:
 	return ERR_PTR(ret);
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index 6ebec83f1a77..b258532162b8 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -167,5 +167,7 @@ struct clk {
  */
 int __clk_init(struct device *dev, struct clk *clk);
 
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw);
+
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 8f2148942b87..5db3412106b3 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -15,19 +15,6 @@
 
 #ifdef CONFIG_COMMON_CLK
 
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure.  struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
-	struct clk *clk;
-};
-
 /*
  * flags used across common struct clk.  these flags should only affect the
  * top-level framework.  custom flags for dealing with hardware specifics
@@ -39,6 +26,8 @@ struct clk_hw {
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
 
+struct clk_hw;
+
 /**
  * struct clk_ops -  Callback operations for hardware clocks; these are to
  * be provided by the clock implementation, and will be called by drivers
@@ -122,6 +111,41 @@ struct clk_ops {
 	void		(*init)(struct clk_hw *hw);
 };
 
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+	const char		*name;
+	const struct clk_ops	*ops;
+	const char		**parent_names;
+	u8			num_parents;
+	unsigned long		flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure.  struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+	struct clk *clk;
+	struct clk_init_data *init;
+};
+
 /*
  * DOC: Basic clock implementations common to many platforms
  *
@@ -255,12 +279,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
  * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
  *
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
@@ -268,9 +287,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
  * rest of the clock API.  In the event of an error clk_register will return an
  * error code; drivers must test for an error code after calling clk_register.
  */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		const char **parent_names, u8 num_parents, unsigned long flags);
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
 
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);
-- 
cgit v1.2.3


From 0e1c03017549a9df513622b3f15ff38eb8d35a62 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Wed, 11 Apr 2012 16:03:42 +0530
Subject: clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is
 enabled

This is well documented but isn't implemented. clk_set_rate() must check if
flags have CLK_SET_RATE_GATE bit set and is enabled too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index c81803b9ba35..8149764f8438 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -900,6 +900,11 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (rate == clk->rate)
 		goto out;
 
+	if ((clk->flags & CLK_SET_RATE_GATE) && __clk_is_enabled(clk)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
 	/* calculate new rates and get the topmost changed clock */
 	top = clk_calc_new_rates(clk, rate);
 	if (!top) {
-- 
cgit v1.2.3


From 23b5e15a2994fb0c1444f92b76f09a482f32843c Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Sun, 29 Apr 2012 00:02:34 +0800
Subject: clk: mxs: add mxs specific clocks

Add mxs specific clocks, pll, reference clock (PFD), integer divider
and fractional divider.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/mxs/Makefile   |   5 ++
 drivers/clk/mxs/clk-div.c  | 110 ++++++++++++++++++++++++++++++++
 drivers/clk/mxs/clk-frac.c | 139 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/mxs/clk-pll.c  | 116 ++++++++++++++++++++++++++++++++++
 drivers/clk/mxs/clk-ref.c  | 154 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/mxs/clk.c      |  28 +++++++++
 drivers/clk/mxs/clk.h      |  66 +++++++++++++++++++
 7 files changed, 618 insertions(+)
 create mode 100644 drivers/clk/mxs/Makefile
 create mode 100644 drivers/clk/mxs/clk-div.c
 create mode 100644 drivers/clk/mxs/clk-frac.c
 create mode 100644 drivers/clk/mxs/clk-pll.c
 create mode 100644 drivers/clk/mxs/clk-ref.c
 create mode 100644 drivers/clk/mxs/clk.c
 create mode 100644 drivers/clk/mxs/clk.h

(limited to 'drivers')

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
new file mode 100644
index 000000000000..d9472a809bba
--- /dev/null
+++ b/drivers/clk/mxs/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for mxs specific clk
+#
+
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
diff --git a/drivers/clk/mxs/clk-div.c b/drivers/clk/mxs/clk-div.c
new file mode 100644
index 000000000000..90e1da93877e
--- /dev/null
+++ b/drivers/clk/mxs/clk-div.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_div - mxs integer divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @reg: register address
+ * @busy: busy bit shift
+ *
+ * The mxs divider clock is a subclass of basic clk_divider with an
+ * addtional busy bit.
+ */
+struct clk_div {
+	struct clk_divider divider;
+	const struct clk_ops *ops;
+	void __iomem *reg;
+	u8 busy;
+};
+
+static inline struct clk_div *to_clk_div(struct clk_hw *hw)
+{
+	struct clk_divider *divider = container_of(hw, struct clk_divider, hw);
+
+	return container_of(divider, struct clk_div, divider);
+}
+
+static unsigned long clk_div_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_div *div = to_clk_div(hw);
+
+	return div->ops->recalc_rate(&div->divider.hw, parent_rate);
+}
+
+static long clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_div *div = to_clk_div(hw);
+
+	return div->ops->round_rate(&div->divider.hw, rate, prate);
+}
+
+static int clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_div *div = to_clk_div(hw);
+	int ret;
+
+	ret = div->ops->set_rate(&div->divider.hw, rate, parent_rate);
+	if (!ret)
+		ret = mxs_clk_wait(div->reg, div->busy);
+
+	return ret;
+}
+
+static struct clk_ops clk_div_ops = {
+	.recalc_rate = clk_div_recalc_rate,
+	.round_rate = clk_div_round_rate,
+	.set_rate = clk_div_set_rate,
+};
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+			void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+	struct clk_div *div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	div->reg = reg;
+	div->busy = busy;
+
+	div->divider.reg = reg;
+	div->divider.shift = shift;
+	div->divider.width = width;
+	div->divider.flags = CLK_DIVIDER_ONE_BASED;
+	div->divider.lock = &mxs_lock;
+	div->divider.hw.init = &init;
+	div->ops = &clk_divider_ops;
+
+	clk = clk_register(NULL, &div->divider.hw);
+	if (IS_ERR(clk))
+		kfree(div);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c
new file mode 100644
index 000000000000..e6aa6b567d68
--- /dev/null
+++ b/drivers/clk/mxs/clk-frac.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_frac - mxs fractional divider clock
+ * @hw: clk_hw for the fractional divider clock
+ * @reg: register address
+ * @shift: the divider bit shift
+ * @width: the divider bit width
+ * @busy: busy bit shift
+ *
+ * The clock is an adjustable fractional divider with a busy bit to wait
+ * when the divider is adjusted.
+ */
+struct clk_frac {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 shift;
+	u8 width;
+	u8 busy;
+};
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	u32 div;
+
+	div = readl_relaxed(frac->reg) >> frac->shift;
+	div &= (1 << frac->width) - 1;
+
+	return (parent_rate >> frac->width) * div;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long parent_rate = *prate;
+	u32 div;
+	u64 tmp;
+
+	if (rate > parent_rate)
+		return -EINVAL;
+
+	tmp = rate;
+	tmp <<= frac->width;
+	do_div(tmp, parent_rate);
+	div = tmp;
+
+	if (!div)
+		return -EINVAL;
+
+	return (parent_rate >> frac->width) * div;
+}
+
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long flags;
+	u32 div, val;
+	u64 tmp;
+
+	if (rate > parent_rate)
+		return -EINVAL;
+
+	tmp = rate;
+	tmp <<= frac->width;
+	do_div(tmp, parent_rate);
+	div = tmp;
+
+	if (!div)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mxs_lock, flags);
+
+	val = readl_relaxed(frac->reg);
+	val &= ~(((1 << frac->width) - 1) << frac->shift);
+	val |= div << frac->shift;
+	writel_relaxed(val, frac->reg);
+
+	spin_unlock_irqrestore(&mxs_lock, flags);
+
+	return mxs_clk_wait(frac->reg, frac->busy);
+}
+
+static struct clk_ops clk_frac_ops = {
+	.recalc_rate = clk_frac_recalc_rate,
+	.round_rate = clk_frac_round_rate,
+	.set_rate = clk_frac_set_rate,
+};
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+			 void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+	struct clk_frac *frac;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+	if (!frac)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_frac_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	frac->reg = reg;
+	frac->shift = shift;
+	frac->width = width;
+	frac->busy = busy;
+	frac->hw.init = &init;
+
+	clk = clk_register(NULL, &frac->hw);
+	if (IS_ERR(clk))
+		kfree(frac);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-pll.c b/drivers/clk/mxs/clk-pll.c
new file mode 100644
index 000000000000..fadae41833ec
--- /dev/null
+++ b/drivers/clk/mxs/clk-pll.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_pll - mxs pll clock
+ * @hw: clk_hw for the pll
+ * @base: base address of the pll
+ * @power: the shift of power bit
+ * @rate: the clock rate of the pll
+ *
+ * The mxs pll is a fixed rate clock with power and gate control,
+ * and the shift of gate bit is always 31.
+ */
+struct clk_pll {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 power;
+	unsigned long rate;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << pll->power, pll->base + SET);
+
+	udelay(10);
+
+	return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << pll->power, pll->base + CLR);
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << 31, pll->base + CLR);
+
+	return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << 31, pll->base + SET);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	return pll->rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.prepare = clk_pll_prepare,
+	.unprepare = clk_pll_unprepare,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+	.recalc_rate = clk_pll_recalc_rate,
+};
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+			void __iomem *base, u8 power, unsigned long rate)
+{
+	struct clk_pll *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	pll->base = base;
+	pll->rate = rate;
+	pll->power = power;
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c
new file mode 100644
index 000000000000..4adeed6c2f94
--- /dev/null
+++ b/drivers/clk/mxs/clk-ref.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_ref - mxs reference clock
+ * @hw: clk_hw for the reference clock
+ * @reg: register address
+ * @idx: the index of the reference clock within the same register
+ *
+ * The mxs reference clock sources from pll.  Every 4 reference clocks share
+ * one register space, and @idx is used to identify them.  Each reference
+ * clock has a gate control and a fractional * divider.  The rate is calculated
+ * as pll rate  * (18 / FRAC), where FRAC = 18 ~ 35.
+ */
+struct clk_ref {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 idx;
+};
+
+#define to_clk_ref(_hw) container_of(_hw, struct clk_ref, hw)
+
+static int clk_ref_enable(struct clk_hw *hw)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+
+	writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR);
+
+	return 0;
+}
+
+static void clk_ref_disable(struct clk_hw *hw)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+
+	writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET);
+}
+
+static unsigned long clk_ref_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+	u64 tmp = parent_rate;
+	u8 frac = (readl_relaxed(ref->reg) >> (ref->idx * 8)) & 0x3f;
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_ref_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+
+	if (frac < 18)
+		frac = 18;
+	else if (frac > 35)
+		frac = 35;
+
+	tmp = parent_rate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_ref_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+	unsigned long flags;
+	u64 tmp = parent_rate;
+	u32 val;
+	u8 frac, shift = ref->idx * 8;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+
+	if (frac < 18)
+		frac = 18;
+	else if (frac > 35)
+		frac = 35;
+
+	spin_lock_irqsave(&mxs_lock, flags);
+
+	val = readl_relaxed(ref->reg);
+	val &= ~(0x3f << shift);
+	val |= frac << shift;
+	writel_relaxed(val, ref->reg);
+
+	spin_unlock_irqrestore(&mxs_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_ref_ops = {
+	.enable		= clk_ref_enable,
+	.disable	= clk_ref_disable,
+	.recalc_rate	= clk_ref_recalc_rate,
+	.round_rate	= clk_ref_round_rate,
+	.set_rate	= clk_ref_set_rate,
+};
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx)
+{
+	struct clk_ref *ref;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	ref = kzalloc(sizeof(*ref), GFP_KERNEL);
+	if (!ref)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_ref_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	ref->reg = reg;
+	ref->idx = idx;
+	ref->hw.init = &init;
+
+	clk = clk_register(NULL, &ref->hw);
+	if (IS_ERR(clk))
+		kfree(ref);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk.c b/drivers/clk/mxs/clk.c
new file mode 100644
index 000000000000..b24d56067c80
--- /dev/null
+++ b/drivers/clk/mxs/clk.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(mxs_lock);
+
+int mxs_clk_wait(void __iomem *reg, u8 shift)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	while (readl_relaxed(reg) & (1 << shift))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
diff --git a/drivers/clk/mxs/clk.h b/drivers/clk/mxs/clk.h
new file mode 100644
index 000000000000..81421e28e69c
--- /dev/null
+++ b/drivers/clk/mxs/clk.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MXS_CLK_H
+#define __MXS_CLK_H
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#define SET	0x4
+#define CLR	0x8
+
+extern spinlock_t mxs_lock;
+
+int mxs_clk_wait(void __iomem *reg, u8 shift);
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+			void __iomem *base, u8 power, unsigned long rate);
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx);
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+			void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+			 void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+static inline struct clk *mxs_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *mxs_clk_gate(const char *name,
+			const char *parent_name, void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent_name, CLK_SET_RATE_PARENT,
+				 reg, shift, CLK_GATE_SET_TO_DISABLE,
+				 &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_mux(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char **parent_names, int num_parents)
+{
+	return clk_register_mux(NULL, name, parent_names, num_parents,
+				CLK_SET_RATE_PARENT, reg, shift, width,
+				0, &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_fixed_factor(const char *name,
+		const char *parent_name, unsigned int mult, unsigned int div)
+{
+	return clk_register_fixed_factor(NULL, name, parent_name,
+					 CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif /* __MXS_CLK_H */
-- 
cgit v1.2.3


From ff261b7f641edc61ca05f0c93b5631c9c8622c08 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Sun, 29 Apr 2012 00:02:35 +0800
Subject: clk: mxs: add clock support for imx23

Add imx23 clock support based on common clk framework.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/mxs/Makefile    |   2 +
 drivers/clk/mxs/clk-imx23.c | 204 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 206 insertions(+)
 create mode 100644 drivers/clk/mxs/clk-imx23.c

(limited to 'drivers')

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index d9472a809bba..7086ad3c56d1 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+
+obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
new file mode 100644
index 000000000000..2ec76ff46971
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/mx23.h>
+#include "clk.h"
+
+#define DIGCTRL			MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
+#define CLKCTRL			MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+#define PLLCTRL0		(CLKCTRL + 0x0000)
+#define CPU			(CLKCTRL + 0x0020)
+#define HBUS			(CLKCTRL + 0x0030)
+#define XBUS			(CLKCTRL + 0x0040)
+#define XTAL			(CLKCTRL + 0x0050)
+#define PIX			(CLKCTRL + 0x0060)
+#define SSP			(CLKCTRL + 0x0070)
+#define GPMI			(CLKCTRL + 0x0080)
+#define SPDIF			(CLKCTRL + 0x0090)
+#define EMI			(CLKCTRL + 0x00a0)
+#define SAIF			(CLKCTRL + 0x00c0)
+#define TV			(CLKCTRL + 0x00d0)
+#define ETM			(CLKCTRL + 0x00e0)
+#define FRAC			(CLKCTRL + 0x00f0)
+#define CLKSEQ			(CLKCTRL + 0x0110)
+
+#define BP_CPU_INTERRUPT_WAIT	12
+#define BP_CLKSEQ_BYPASS_SAIF	0
+#define BP_CLKSEQ_BYPASS_SSP	5
+#define BP_SAIF_DIV_FRAC_EN	16
+#define BP_FRAC_IOFRAC		24
+
+static void __init clk_misc_init(void)
+{
+	u32 val;
+
+	/* Gate off cpu clock in WFI for power saving */
+	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+
+	/* Clear BYPASS for SAIF */
+	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+
+	/* SAIF has to use frac div for functional operation */
+	val = readl_relaxed(SAIF);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF);
+
+	/*
+	 * Source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac to get a 288 MHz ref_io.
+	 */
+	__mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
+	__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+}
+
+static struct clk_lookup uart_lookups[] __initdata = {
+	{ .dev_id = "duart", },
+	{ .dev_id = "mxs-auart.0", },
+	{ .dev_id = "mxs-auart.1", },
+	{ .dev_id = "8006c000.serial", },
+	{ .dev_id = "8006e000.serial", },
+	{ .dev_id = "80070000.serial", },
+};
+
+static struct clk_lookup hbus_lookups[] __initdata = {
+	{ .dev_id = "mxs-dma-apbh", },
+	{ .dev_id = "80004000.dma-apbh", },
+};
+
+static struct clk_lookup xbus_lookups[] __initdata = {
+	{ .dev_id = "duart", .con_id = "apb_pclk"},
+	{ .dev_id = "mxs-dma-apbx", },
+	{ .dev_id = "80024000.dma-apbx", },
+};
+
+static struct clk_lookup ssp_lookups[] __initdata = {
+	{ .dev_id = "mxs-mmc.0", },
+	{ .dev_id = "mxs-mmc.1", },
+	{ .dev_id = "80010000.ssp", },
+	{ .dev_id = "80034000.ssp", },
+};
+
+static struct clk_lookup lcdif_lookups[] __initdata = {
+	{ .dev_id = "imx23-fb", },
+	{ .dev_id = "80030000.lcdif", },
+};
+
+static struct clk_lookup gpmi_lookups[] __initdata = {
+	{ .dev_id = "imx23-gpmi-nand", },
+	{ .dev_id = "8000c000.gpmi", },
+};
+
+static const char *sel_pll[]  __initconst = { "pll", "ref_xtal", };
+static const char *sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
+static const char *sel_pix[]  __initconst = { "ref_pix", "ref_xtal", };
+static const char *sel_io[]   __initconst = { "ref_io", "ref_xtal", };
+static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+
+enum imx23_clk {
+	ref_xtal, pll, ref_cpu, ref_emi, ref_pix, ref_io, saif_sel,
+	lcdif_sel, gpmi_sel, ssp_sel, emi_sel, cpu, etm_sel, cpu_pll,
+	cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll,
+	emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div,
+	clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif,
+	lcdif, etm, usb, usb_pwr,
+	clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static enum imx23_clk clks_init_on[] __initdata = {
+	cpu, hbus, xbus, emi, uart,
+};
+
+int __init mx23_clocks_init(void)
+{
+	int i;
+
+	clk_misc_init();
+
+	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+	clks[pll] = mxs_clk_pll("pll", "ref_xtal", PLLCTRL0, 16, 480000000);
+	clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll", FRAC, 0);
+	clks[ref_emi] = mxs_clk_ref("ref_emi", "pll", FRAC, 1);
+	clks[ref_pix] = mxs_clk_ref("ref_pix", "pll", FRAC, 2);
+	clks[ref_io] = mxs_clk_ref("ref_io", "pll", FRAC, 3);
+	clks[saif_sel] = mxs_clk_mux("saif_sel", CLKSEQ, 0, 1, sel_pll, ARRAY_SIZE(sel_pll));
+	clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 1, 1, sel_pix, ARRAY_SIZE(sel_pix));
+	clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 4, 1, sel_io, ARRAY_SIZE(sel_io));
+	clks[ssp_sel] = mxs_clk_mux("ssp_sel", CLKSEQ, 5, 1, sel_io, ARRAY_SIZE(sel_io));
+	clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 6, 1, emi_sels, ARRAY_SIZE(emi_sels));
+	clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 7, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+	clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+	clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+	clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+	clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 29);
+	clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+	clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", PIX, 0, 12, 29);
+	clks[ssp_div] = mxs_clk_div("ssp_div", "ssp_sel", SSP, 0, 9, 29);
+	clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+	clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+	clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+	clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 6, 29);
+	clks[saif_div] = mxs_clk_frac("saif_div", "saif_sel", SAIF, 0, 16, 29);
+	clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+	clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+	clks[adc] = mxs_clk_fixed_factor("adc", "clk32k", 1, 16);
+	clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll", 1, 4);
+	clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+	clks[dri] = mxs_clk_gate("dri", "ref_xtal", XTAL, 28);
+	clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+	clks[filt] = mxs_clk_gate("filt", "ref_xtal", XTAL, 30);
+	clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+	clks[ssp] = mxs_clk_gate("ssp", "ssp_div", SSP, 31);
+	clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+	clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+	clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+	clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31);
+	clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31);
+	clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+	clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2);
+	clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i])) {
+			pr_err("i.MX23 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+			return PTR_ERR(clks[i]);
+		}
+
+	clk_register_clkdev(clks[clk32k], NULL, "timrot");
+	clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
+	clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
+	clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
+	clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups));
+	clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
+	clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
+	mxs_timer_init(NULL, MX23_INT_TIMER0);
+
+	return 0;
+}
-- 
cgit v1.2.3


From 7d81397cd93da2850e0aec54c3ba4eb4908a675b Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Sun, 29 Apr 2012 00:02:36 +0800
Subject: clk: mxs: add clock support for imx28

Add imx28 clock support based on common clk framework.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/mxs/Makefile    |   1 +
 drivers/clk/mxs/clk-imx28.c | 337 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 338 insertions(+)
 create mode 100644 drivers/clk/mxs/clk-imx28.c

(limited to 'drivers')

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7086ad3c56d1..7bedeec08524 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -5,3 +5,4 @@
 obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
 
 obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
+obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
new file mode 100644
index 000000000000..4bfd1f4a8736
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -0,0 +1,337 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/mx28.h>
+#include "clk.h"
+
+#define CLKCTRL			MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+#define PLL0CTRL0		(CLKCTRL + 0x0000)
+#define PLL1CTRL0		(CLKCTRL + 0x0020)
+#define PLL2CTRL0		(CLKCTRL + 0x0040)
+#define CPU			(CLKCTRL + 0x0050)
+#define HBUS			(CLKCTRL + 0x0060)
+#define XBUS			(CLKCTRL + 0x0070)
+#define XTAL			(CLKCTRL + 0x0080)
+#define SSP0			(CLKCTRL + 0x0090)
+#define SSP1			(CLKCTRL + 0x00a0)
+#define SSP2			(CLKCTRL + 0x00b0)
+#define SSP3			(CLKCTRL + 0x00c0)
+#define GPMI			(CLKCTRL + 0x00d0)
+#define SPDIF			(CLKCTRL + 0x00e0)
+#define EMI			(CLKCTRL + 0x00f0)
+#define SAIF0			(CLKCTRL + 0x0100)
+#define SAIF1			(CLKCTRL + 0x0110)
+#define LCDIF			(CLKCTRL + 0x0120)
+#define ETM			(CLKCTRL + 0x0130)
+#define ENET			(CLKCTRL + 0x0140)
+#define FLEXCAN			(CLKCTRL + 0x0160)
+#define FRAC0			(CLKCTRL + 0x01b0)
+#define FRAC1			(CLKCTRL + 0x01c0)
+#define CLKSEQ			(CLKCTRL + 0x01d0)
+
+#define BP_CPU_INTERRUPT_WAIT	12
+#define BP_SAIF_DIV_FRAC_EN	16
+#define BP_ENET_DIV_TIME	21
+#define BP_ENET_SLEEP		31
+#define BP_CLKSEQ_BYPASS_SAIF0	0
+#define BP_CLKSEQ_BYPASS_SSP0	3
+#define BP_FRAC0_IO1FRAC	16
+#define BP_FRAC0_IO0FRAC	24
+
+#define DIGCTRL			MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+#define BP_SAIF_CLKMUX		10
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ *		clock pins selected for SAIF1 input clocks.
+ *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ *		SAIF0 clock inputs selected for SAIF1 input clocks.
+ *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+	if (clkmux > 0x3)
+		return -EINVAL;
+
+	__mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
+	__mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+
+	return 0;
+}
+
+static void __init clk_misc_init(void)
+{
+	u32 val;
+
+	/* Gate off cpu clock in WFI for power saving */
+	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+
+	/* 0 is a bad default value for a divider */
+	__mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+
+	/* Clear BYPASS for SAIF */
+	__mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+
+	/* SAIF has to use frac div for functional operation */
+	val = readl_relaxed(SAIF0);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF0);
+
+	val = readl_relaxed(SAIF1);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF1);
+
+	/* Extra fec clock setting */
+	val = readl_relaxed(ENET);
+	val &= ~(1 << BP_ENET_SLEEP);
+	writel_relaxed(val, ENET);
+
+	/*
+	 * Source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	__mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac0 to get a 288 MHz ref_io0.
+	 */
+	val = readl_relaxed(FRAC0);
+	val &= ~(0x3f << BP_FRAC0_IO0FRAC);
+	val |= 30 << BP_FRAC0_IO0FRAC;
+	writel_relaxed(val, FRAC0);
+}
+
+static struct clk_lookup uart_lookups[] __initdata = {
+	{ .dev_id = "duart", },
+	{ .dev_id = "mxs-auart.0", },
+	{ .dev_id = "mxs-auart.1", },
+	{ .dev_id = "mxs-auart.2", },
+	{ .dev_id = "mxs-auart.3", },
+	{ .dev_id = "mxs-auart.4", },
+	{ .dev_id = "8006a000.serial", },
+	{ .dev_id = "8006c000.serial", },
+	{ .dev_id = "8006e000.serial", },
+	{ .dev_id = "80070000.serial", },
+	{ .dev_id = "80072000.serial", },
+	{ .dev_id = "80074000.serial", },
+};
+
+static struct clk_lookup hbus_lookups[] __initdata = {
+	{ .dev_id = "mxs-dma-apbh", },
+	{ .dev_id = "80004000.dma-apbh", },
+};
+
+static struct clk_lookup xbus_lookups[] __initdata = {
+	{ .dev_id = "duart", .con_id = "apb_pclk"},
+	{ .dev_id = "mxs-dma-apbx", },
+	{ .dev_id = "80024000.dma-apbx", },
+};
+
+static struct clk_lookup ssp0_lookups[] __initdata = {
+	{ .dev_id = "mxs-mmc.0", },
+	{ .dev_id = "80010000.ssp", },
+};
+
+static struct clk_lookup ssp1_lookups[] __initdata = {
+	{ .dev_id = "mxs-mmc.1", },
+	{ .dev_id = "80012000.ssp", },
+};
+
+static struct clk_lookup ssp2_lookups[] __initdata = {
+	{ .dev_id = "mxs-mmc.2", },
+	{ .dev_id = "80014000.ssp", },
+};
+
+static struct clk_lookup ssp3_lookups[] __initdata = {
+	{ .dev_id = "mxs-mmc.3", },
+	{ .dev_id = "80016000.ssp", },
+};
+
+static struct clk_lookup lcdif_lookups[] __initdata = {
+	{ .dev_id = "imx28-fb", },
+	{ .dev_id = "80030000.lcdif", },
+};
+
+static struct clk_lookup gpmi_lookups[] __initdata = {
+	{ .dev_id = "imx28-gpmi-nand", },
+	{ .dev_id = "8000c000.gpmi", },
+};
+
+static struct clk_lookup fec_lookups[] __initdata = {
+	{ .dev_id = "imx28-fec.0", },
+	{ .dev_id = "imx28-fec.1", },
+	{ .dev_id = "800f0000.ethernet", },
+	{ .dev_id = "800f4000.ethernet", },
+};
+
+static struct clk_lookup can0_lookups[] __initdata = {
+	{ .dev_id = "flexcan.0", },
+	{ .dev_id = "80032000.can", },
+};
+
+static struct clk_lookup can1_lookups[] __initdata = {
+	{ .dev_id = "flexcan.1", },
+	{ .dev_id = "80034000.can", },
+};
+
+static struct clk_lookup saif0_lookups[] __initdata = {
+	{ .dev_id = "mxs-saif.0", },
+	{ .dev_id = "80042000.saif", },
+};
+
+static struct clk_lookup saif1_lookups[] __initdata = {
+	{ .dev_id = "mxs-saif.1", },
+	{ .dev_id = "80046000.saif", },
+};
+
+static const char *sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
+static const char *sel_io0[]  __initconst = { "ref_io0", "ref_xtal", };
+static const char *sel_io1[]  __initconst = { "ref_io1", "ref_xtal", };
+static const char *sel_pix[]  __initconst = { "ref_pix", "ref_xtal", };
+static const char *sel_gpmi[] __initconst = { "ref_gpmi", "ref_xtal", };
+static const char *sel_pll0[] __initconst = { "pll0", "ref_xtal", };
+static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+static const char *ptp_sels[] __initconst = { "ref_xtal", "pll0", };
+
+enum imx28_clk {
+	ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1,
+	ref_pix, ref_hsadc, ref_gpmi, saif0_sel, saif1_sel, gpmi_sel,
+	ssp0_sel, ssp1_sel, ssp2_sel, ssp3_sel, emi_sel, etm_sel,
+	lcdif_sel, cpu, ptp_sel, cpu_pll, cpu_xtal, hbus, xbus,
+	ssp0_div, ssp1_div, ssp2_div, ssp3_div, gpmi_div, emi_pll,
+	emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
+	clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
+	ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
+	fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out,
+	clk_max
+};
+
+static struct clk *clks[clk_max];
+
+static enum imx28_clk clks_init_on[] __initdata = {
+	cpu, hbus, xbus, emi, uart,
+};
+
+int __init mx28_clocks_init(void)
+{
+	int i;
+
+	clk_misc_init();
+
+	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+	clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000);
+	clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000);
+	clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
+	clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
+	clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
+	clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
+	clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+	clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
+	clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
+	clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
+	clks[saif0_sel] = mxs_clk_mux("saif0_sel", CLKSEQ, 0, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+	clks[saif1_sel] = mxs_clk_mux("saif1_sel", CLKSEQ, 1, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+	clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 2, 1, sel_gpmi, ARRAY_SIZE(sel_gpmi));
+	clks[ssp0_sel] = mxs_clk_mux("ssp0_sel", CLKSEQ, 3, 1, sel_io0, ARRAY_SIZE(sel_io0));
+	clks[ssp1_sel] = mxs_clk_mux("ssp1_sel", CLKSEQ, 4, 1, sel_io0, ARRAY_SIZE(sel_io0));
+	clks[ssp2_sel] = mxs_clk_mux("ssp2_sel", CLKSEQ, 5, 1, sel_io1, ARRAY_SIZE(sel_io1));
+	clks[ssp3_sel] = mxs_clk_mux("ssp3_sel", CLKSEQ, 6, 1, sel_io1, ARRAY_SIZE(sel_io1));
+	clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 7, 1, emi_sels, ARRAY_SIZE(emi_sels));
+	clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+	clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 14, 1, sel_pix, ARRAY_SIZE(sel_pix));
+	clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 18, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+	clks[ptp_sel] = mxs_clk_mux("ptp_sel", ENET, 19, 1, ptp_sels, ARRAY_SIZE(ptp_sels));
+	clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+	clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+	clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 31);
+	clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+	clks[ssp0_div] = mxs_clk_div("ssp0_div", "ssp0_sel", SSP0, 0, 9, 29);
+	clks[ssp1_div] = mxs_clk_div("ssp1_div", "ssp1_sel", SSP1, 0, 9, 29);
+	clks[ssp2_div] = mxs_clk_div("ssp2_div", "ssp2_sel", SSP2, 0, 9, 29);
+	clks[ssp3_div] = mxs_clk_div("ssp3_div", "ssp3_sel", SSP3, 0, 9, 29);
+	clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+	clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+	clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+	clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", LCDIF, 0, 13, 29);
+	clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 7, 29);
+	clks[ptp] = mxs_clk_div("ptp", "ptp_sel", ENET, 21, 6, 27);
+	clks[saif0_div] = mxs_clk_frac("saif0_div", "saif0_sel", SAIF0, 0, 16, 29);
+	clks[saif1_div] = mxs_clk_frac("saif1_div", "saif1_sel", SAIF1, 0, 16, 29);
+	clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+	clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+	clks[lradc] = mxs_clk_fixed_factor("lradc", "clk32k", 1, 16);
+	clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll0", 1, 4);
+	clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+	clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+	clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+	clks[ssp0] = mxs_clk_gate("ssp0", "ssp0_div", SSP0, 31);
+	clks[ssp1] = mxs_clk_gate("ssp1", "ssp1_div", SSP1, 31);
+	clks[ssp2] = mxs_clk_gate("ssp2", "ssp2_div", SSP2, 31);
+	clks[ssp3] = mxs_clk_gate("ssp3", "ssp3_div", SSP3, 31);
+	clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+	clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+	clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+	clks[saif0] = mxs_clk_gate("saif0", "saif0_div", SAIF0, 31);
+	clks[saif1] = mxs_clk_gate("saif1", "saif1_div", SAIF1, 31);
+	clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", LCDIF, 31);
+	clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+	clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30);
+	clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30);
+	clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28);
+	clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2);
+	clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16);
+	clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
+	clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
+	clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i])) {
+			pr_err("i.MX28 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+			return PTR_ERR(clks[i]);
+		}
+
+	clk_register_clkdev(clks[clk32k], NULL, "timrot");
+	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+	clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
+	clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
+	clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
+	clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
+	clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
+	clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
+	clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
+	clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
+	clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
+	clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
+	clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
+	clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
+	clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
+	clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
+	mxs_timer_init(NULL, MX28_INT_TIMER0);
+
+	return 0;
+}
-- 
cgit v1.2.3


From 2664681fa4101aef2bceb81bbe26a81a88131393 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Sun, 29 Apr 2012 00:02:39 +0800
Subject: ARM: mxs: switch to common clk framework

It switches mxs clock support to common clk framework based drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/Kconfig           | 1 +
 arch/arm/mach-mxs/Makefile | 5 +----
 drivers/clk/Makefile       | 2 ++
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 36586dba6fa6..2095a513a7c0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -468,6 +468,7 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select HAVE_CLK_PREPARE
 	help
 	  Support for Freescale MXS-based family of processors
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a567f1..6ce21a26412e 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,12 +1,9 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1f736bc11c4b..a576f5447d38 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,3 +2,5 @@
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o
+
+obj-$(CONFIG_ARCH_MXS)		+= mxs/
-- 
cgit v1.2.3


From 50260924afd4b745bfb6e5f1caee381a1875fc31 Mon Sep 17 00:00:00 2001
From: Shawn Guo
Date: Sun, 29 Apr 2012 00:02:41 +0800
Subject: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init

With old mxs clock support removed, the timer_clk argument of
mxs_timer_init is unused now, so remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-mxs/include/mach/common.h |  4 +---
 arch/arm/mach-mxs/timer.c               | 14 +++++++-------
 drivers/clk/mxs/clk-imx23.c             |  2 +-
 drivers/clk/mxs/clk-imx28.c             |  2 +-
 4 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index e1237ab25862..9bdc95388871 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -11,11 +11,9 @@
 #ifndef __MACH_MXS_COMMON_H__
 #define __MACH_MXS_COMMON_H__
 
-struct clk;
-
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(struct clk *, int);
+extern void mxs_timer_init(int);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 575e8fd6bc79..02d36de9c4e8 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -244,14 +244,14 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxs_timer_init(struct clk *timer_clk, int irq)
+void __init mxs_timer_init(int irq)
 {
-	if (!timer_clk) {
-		timer_clk = clk_get_sys("timrot", NULL);
-		if (IS_ERR(timer_clk)) {
-			pr_err("%s: failed to get clk\n", __func__);
-			return;
-		}
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("timrot", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("%s: failed to get clk\n", __func__);
+		return;
 	}
 
 	clk_prepare_enable(timer_clk);
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index 2ec76ff46971..dcae11285716 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -198,7 +198,7 @@ int __init mx23_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init(NULL, MX23_INT_TIMER0);
+	mxs_timer_init(MX23_INT_TIMER0);
 
 	return 0;
 }
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 4bfd1f4a8736..b2a3257d4f66 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -331,7 +331,7 @@ int __init mx28_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init(NULL, MX28_INT_TIMER0);
+	mxs_timer_init(MX28_INT_TIMER0);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 63f5c3b2b18dcaca0fc8983b52a3f5d4d70a0590 Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Wed, 2 May 2012 16:23:43 -0700
Subject: clk: prevent spurious parent rate propagation

Patch 'clk: always pass parent_rate into .round_rate' made a subtle
change to the semantics of .round_rate.  It is now expected for the
parent's rate to always be passed in, simplifying the implemenation of
various .round_rate callback definitions.

However the patch also introduced a bug in clk_calc_new_rates whereby a
clock without the CLK_SET_RATE_PARENT flag set could still propagate a
rate change up to a parent clock if the the .round_rate callback
modified the &best_parent_rate value in any way.

This patch fixes the issue at the framework level (in
clk_calc_new_rates) by specifically handling the case where the
CLK_SET_RATE_PARENT flag is not set.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/clk.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 8149764f8438..7ceca0e8645a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -774,12 +774,18 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 	if (IS_ERR_OR_NULL(clk))
 		return NULL;
 
+	/* save parent rate, if it exists */
+	if (clk->parent)
+		best_parent_rate = clk->parent->rate;
+
 	/* never propagate up to the parent */
 	if (!(clk->flags & CLK_SET_RATE_PARENT)) {
 		if (!clk->ops->round_rate) {
 			clk->new_rate = clk->rate;
 			return NULL;
 		}
+		new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
+		goto out;
 	}
 
 	/* need clk->parent from here on out */
@@ -795,7 +801,6 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 		goto out;
 	}
 
-	best_parent_rate = clk->parent->rate;
 	new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
 
 	if (best_parent_rate != clk->parent->rate) {
-- 
cgit v1.2.3


From d269b974e32c5dcf043acd07f9ad96e715019ffd Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Wed, 2 May 2012 15:45:32 -0700
Subject: clk: remove COMMON_CLK_DISABLE_UNUSED

Exposing this option generates confusion and incorrect behavior for
single-image builds across platforms.  Enable this behavior permanently.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
---
 drivers/clk/Kconfig | 11 -----------
 drivers/clk/clk.c   |  2 --
 2 files changed, 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index f05a60dc1a03..4864407e3fc4 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -23,17 +23,6 @@ config COMMON_CLK
 menu "Common Clock Framework"
 	depends on COMMON_CLK
 
-config COMMON_CLK_DISABLE_UNUSED
-	bool "Disabled unused clocks at boot"
-	depends on COMMON_CLK
-	---help---
-	  Traverses the entire clock tree and disables any clocks that are
-	  enabled in hardware but have not been enabled by any device drivers.
-	  This saves power and keeps the software model of the clock in line
-	  with reality.
-
-	  If in doubt, say "N".
-
 config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
 	depends on COMMON_CLK
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 7ceca0e8645a..e5d5dc13bcfd 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -196,7 +196,6 @@ late_initcall(clk_debug_init);
 static inline int clk_debug_register(struct clk *clk) { return 0; }
 #endif
 
-#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED
 /* caller must hold prepare_lock */
 static void clk_disable_unused_subtree(struct clk *clk)
 {
@@ -246,7 +245,6 @@ static int clk_disable_unused(void)
 	return 0;
 }
 late_initcall(clk_disable_unused);
-#endif
 
 /***    helper functions   ***/
 
-- 
cgit v1.2.3


From 31df9db99549cd29bbe5e32da4492970e6f97191 Mon Sep 17 00:00:00 2001
From: Mike Turquette
Date: Sun, 6 May 2012 18:48:11 -0700
Subject: clk: mux: assign init data

The original conversion to struct clk_hw_init failed to add the pointer
assignment in clk_register_mux.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/clk-mux.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 8e97491902e7..fd36a8ea73d9 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -116,6 +116,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 	mux->width = width;
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
+	mux->hw.init = &init;
 
 	clk = clk_register(dev, &mux->hw);
 
-- 
cgit v1.2.3


From f0948f59dbc8e725a96ba16da666e8f5cdd43ba8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer
Date: Thu, 3 May 2012 15:36:14 +0530
Subject: clk: add a fixed factor clock

Having fixed factors/dividers in hardware is a common pattern, so
add a basic clock type doing this. It basically describes a fixed
factor clock using a nominator and a denominator.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
[mturquette@linaro.org: constify parent_names in static init macro]
[mturquette@linaro.org: copy/paste bug from mux in static init macro]
[mturquette@linaro.org: fix error handling in clk_register_fixed_factor]
[mturquette@linaro.org: improve division accuracy; thanks to Saravana]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/Makefile           |  2 +-
 drivers/clk/clk-fixed-factor.c | 95 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk-private.h    | 20 +++++++++
 include/linux/clk-provider.h   | 23 ++++++++++
 4 files changed, 139 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/clk-fixed-factor.c

(limited to 'drivers')

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1f736bc11c4b..24aa7144811b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,4 +1,4 @@
 
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
-				   clk-mux.o clk-divider.o
+				   clk-mux.o clk-divider.o clk-fixed-factor.o
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
new file mode 100644
index 000000000000..c8c003e217ad
--- /dev/null
+++ b/drivers/clk/clk-fixed-factor.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Standard functionality for the common clock API.
+ */
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed multiplier and divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is fixed.  clk->rate = parent->rate / div * mult
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	return parent_rate * fix->mult / fix->div;
+}
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / fix->mult) * fix->div;
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return (*prate / fix->div) * fix->mult;
+}
+
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	return 0;
+}
+
+struct clk_ops clk_fixed_factor_ops = {
+	.round_rate = clk_factor_round_rate,
+	.set_rate = clk_factor_set_rate,
+	.recalc_rate = clk_factor_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div)
+{
+	struct clk_fixed_factor *fix;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	fix = kmalloc(sizeof(*fix), GFP_KERNEL);
+	if (!fix) {
+		pr_err("%s: could not allocate fixed factor clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_fixed_factor assignments */
+	fix->mult = mult;
+	fix->div = div;
+	fix->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_fixed_factor_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(dev, &fix->hw);
+
+	if (IS_ERR(clk))
+		kfree(fix);
+
+	return clk;
+}
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index b258532162b8..eb3f84bc5325 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -143,6 +143,26 @@ struct clk {
 	DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names,	\
 			_parents);
 
+#define DEFINE_CLK_FIXED_FACTOR(_name, _parent_name,		\
+				_parent_ptr, _flags,		\
+				_mult, _div)			\
+	static struct clk _name;				\
+	static const char *_name##_parent_names[] = {		\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_fixed_factor _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.mult = _mult,					\
+		.div = _div,					\
+	};							\
+	DEFINE_CLK(_name, clk_fixed_factor_ops, _flags,		\
+			_name##_parent_names, _name##_parents);
+
 /**
  * __clk_init - initialize the data structures in a struct clk
  * @dev:	device initializing this clk, placeholder for now
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5db3412106b3..c1c23b9ec368 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -276,6 +276,29 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock);
 
+/**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mult:	multiplier
+ * @div:	divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+	struct clk_hw	hw;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
-- 
cgit v1.2.3


From 4574b886698dfad6209102fed6136622b5fe1c21 Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Fri, 6 Apr 2012 17:17:26 +0200
Subject: ARM: Orion: SPI: Add clk/clkdev support.

Remove now redundant tclk from SPI platform data. This makes the platform
data empty, so remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-dove/common.c                    |  6 ++--
 arch/arm/mach-dove/dove-db-setup.c             |  1 -
 arch/arm/mach-kirkwood/board-dreamplug.c       |  1 -
 arch/arm/mach-kirkwood/common.c                | 10 +++++--
 arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c |  1 -
 arch/arm/mach-kirkwood/rd88f6192-nas-setup.c   |  1 -
 arch/arm/mach-kirkwood/t5325-setup.c           |  1 -
 arch/arm/mach-kirkwood/tsx1x-common.c          |  1 -
 arch/arm/mach-mv78xx0/common.c                 |  2 ++
 arch/arm/mach-orion5x/common.c                 |  4 ++-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c   |  1 -
 arch/arm/plat-orion/common.c                   | 38 ++++++++++++++++----------
 arch/arm/plat-orion/include/plat/common.h      | 11 +++++---
 drivers/spi/spi-orion.c                        | 30 +++++++++++++++-----
 include/linux/spi/orion_spi.h                  | 17 ------------
 15 files changed, 70 insertions(+), 55 deletions(-)
 delete mode 100644 include/linux/spi/orion_spi.h

(limited to 'drivers')

diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 63fe6e612e98..da5b4047464d 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -76,6 +76,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       get_tclk());
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************
@@ -162,12 +164,12 @@ void __init dove_uart3_init(void)
  ****************************************************************************/
 void __init dove_spi0_init(void)
 {
-	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
+	orion_spi_init(DOVE_SPI0_PHYS_BASE);
 }
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index ea77ae430b2d..bc2867f11346 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/pci.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 985453994dd3..55e357ab2923 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 57b8d1ef3093..476e0b941db7 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -86,10 +86,12 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
+	struct clk *runit;
+
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
 
-	kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
+	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
 	kirkwood_register_gate("ge0",    CGC_BIT_GE0);
 	kirkwood_register_gate("ge1",    CGC_BIT_GE1);
 	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
@@ -104,6 +106,10 @@ void __init kirkwood_clk_init(void)
 	kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
 	kirkwood_register_gate("tdm",    CGC_BIT_TDM);
 	kirkwood_register_gate("tsu",    CGC_BIT_TSU);
+
+	/* clkdev entries, mapping clks to devices */
+	orion_clkdev_add(NULL, "orion_spi.0", runit);
+	orion_clkdev_add(NULL, "orion_spi.1", runit);
 }
 
 /*****************************************************************************
@@ -270,7 +276,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 void __init kirkwood_spi_init()
 {
 	kirkwood_clk_ctrl |= CGC_RUNIT;
-	orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 85f6169c2484..6d8364a97810 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -23,7 +23,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index fd2c9c8b6831..f742a66a7045 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f9d2a11b7f96..bad738e44044 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 24294b2bc469..8943ede29b44 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -4,7 +4,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 73733207f5a9..4c24b46520aa 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -175,6 +175,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       get_tclk());
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 81660522c6b4..2ef82e2f511d 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -79,6 +79,8 @@ static void __init clk_init(void)
 {
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
 				       orion5x_tclk);
+
+	orion_clkdev_init(tclk);
 }
 
 /*****************************************************************************
@@ -144,7 +146,7 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
  ****************************************************************************/
 void __init orion5x_spi_init()
 {
-	orion_spi_init(SPI_PHYS_BASE, orion5x_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 2c5fab00d205..7b97a9a211ed 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 4fdd2e7e74a1..bbe50a948710 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -19,12 +19,32 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <linux/spi/orion_spi.h>
 #include <plat/orion_wdt.h>
 #include <plat/mv_xor.h>
 #include <plat/ehci-orion.h>
 #include <mach/bridge-regs.h>
 
+/* Create a clkdev entry for a given device/clk */
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	cl = clkdev_alloc(clk, con_id, dev_id);
+	if (cl)
+		clkdev_add(cl);
+}
+
+/* Create clkdev entries for all orion platforms except kirkwood.
+   Kirkwood has gated clocks for some of its peripherals, so creates
+   its own clkdev entries. For all the other orion devices, create
+   clkdev entries to the tclk. */
+void __init orion_clkdev_init(struct clk *tclk)
+{
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+}
+
 /* Fill in the resources structure and link it into the platform
    device structure. There is always a memory region, and nearly
    always an interrupt.*/
@@ -523,44 +543,32 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-static struct orion_spi_info orion_spi_plat_data;
 static struct resource orion_spi_resources;
 
 static struct platform_device orion_spi = {
 	.name		= "orion_spi",
 	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_spi_plat_data,
-	},
 };
 
-static struct orion_spi_info orion_spi_1_plat_data;
 static struct resource orion_spi_1_resources;
 
 static struct platform_device orion_spi_1 = {
 	.name		= "orion_spi",
 	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_spi_1_plat_data,
-	},
 };
 
 /* Note: The SPI silicon core does have interrupts. However the
  * current Linux software driver does not use interrupts. */
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk)
+void __init orion_spi_init(unsigned long mapbase)
 {
-	orion_spi_plat_data.tclk = tclk;
 	fill_resources(&orion_spi, &orion_spi_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi);
 }
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk)
+void __init orion_spi_1_init(unsigned long mapbase)
 {
-	orion_spi_1_plat_data.tclk = tclk;
 	fill_resources(&orion_spi_1, &orion_spi_1_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi_1);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index a7fa005a5a0e..d188a1aa6f56 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -70,11 +70,9 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 			     unsigned long irq,
 			     unsigned long freq_m);
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk);
+void __init orion_spi_init(unsigned long mapbase);
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk);
+void __init orion_spi_1_init(unsigned long mapbase);
 
 void __init orion_wdt_init(unsigned long tclk);
 
@@ -106,4 +104,9 @@ void __init orion_crypto_init(unsigned long mapbase,
 			      unsigned long srambase,
 			      unsigned long sram_size,
 			      unsigned long irq);
+
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk);
+
+void __init orion_clkdev_init(struct clk *tclk);
 #endif
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index e496f799b7a9..dfd04e91fa6d 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -46,6 +46,7 @@ struct orion_spi {
 	unsigned int		max_speed;
 	unsigned int		min_speed;
 	struct orion_spi_info	*spi_info;
+	struct clk              *clk;
 };
 
 static struct workqueue_struct *orion_spi_wq;
@@ -104,7 +105,7 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	tclk_hz = orion_spi->spi_info->tclk;
+	tclk_hz = clk_get_rate(orion_spi->clk);
 
 	/*
 	 * the supported rates are: 4,6,8...30
@@ -450,6 +451,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	struct orion_spi *spi;
 	struct resource *r;
 	struct orion_spi_info *spi_info;
+	unsigned long tclk_hz;
 	int status = 0;
 
 	spi_info = pdev->dev.platform_data;
@@ -476,19 +478,28 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 	spi->master = master;
 	spi->spi_info = spi_info;
 
-	spi->max_speed = DIV_ROUND_UP(spi_info->tclk, 4);
-	spi->min_speed = DIV_ROUND_UP(spi_info->tclk, 30);
+	spi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk)) {
+		status = PTR_ERR(spi->clk);
+		goto out;
+	}
+
+	clk_prepare(spi->clk);
+	clk_enable(spi->clk);
+	tclk_hz = clk_get_rate(spi->clk);
+	spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
+	spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		status = -ENODEV;
-		goto out;
+		goto out_rel_clk;
 	}
 
 	if (!request_mem_region(r->start, resource_size(r),
 				dev_name(&pdev->dev))) {
 		status = -EBUSY;
-		goto out;
+		goto out_rel_clk;
 	}
 	spi->base = ioremap(r->start, SZ_1K);
 
@@ -508,7 +519,9 @@ static int __init orion_spi_probe(struct platform_device *pdev)
 
 out_rel_mem:
 	release_mem_region(r->start, resource_size(r));
-
+out_rel_clk:
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
 out:
 	spi_master_put(master);
 	return status;
@@ -526,6 +539,9 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
 
 	cancel_work_sync(&spi->work);
 
+	clk_disable_unprepare(spi->clk);
+	clk_put(spi->clk);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(r->start, resource_size(r));
 
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
deleted file mode 100644
index b4d9fa6f797c..000000000000
--- a/include/linux/spi/orion_spi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * orion_spi.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_SPI_ORION_SPI_H
-#define __LINUX_SPI_ORION_SPI_H
-
-struct orion_spi_info {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
-- 
cgit v1.2.3


From 452503ebc7cc4cce5b9e52cf2f03255365a53234 Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sat, 24 Dec 2011 01:24:24 +0100
Subject: ARM: Orion: Eth: Add clk/clkdev support.

The t_clk is moved from the shared part of the ethernet driver into
the per port section. Each port can have its own gated clock, which it
needs to enable/disable, as oppossed to there being one clock shared
by all ports. In practice, only kirkwood supports this at the moment.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-dove/common.c                |  3 +--
 arch/arm/mach-kirkwood/common.c            | 12 +++++----
 arch/arm/mach-mv78xx0/common.c             |  8 +++---
 arch/arm/mach-orion5x/common.c             |  2 +-
 arch/arm/plat-orion/common.c               | 26 +++++++++---------
 arch/arm/plat-orion/include/plat/common.h  | 13 ++++-----
 drivers/net/ethernet/marvell/mv643xx_eth.c | 42 ++++++++++++++++++++++--------
 include/linux/mv643xx_eth.h                |  1 -
 8 files changed, 61 insertions(+), 46 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index da5b4047464d..02766960480d 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -102,8 +102,7 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
-			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
+			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 476e0b941db7..c22354405297 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -86,14 +86,14 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit;
+	struct clk *runit, *ge0, *ge1;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
 
 	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
-	kirkwood_register_gate("ge0",    CGC_BIT_GE0);
-	kirkwood_register_gate("ge1",    CGC_BIT_GE1);
+	ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
+	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
 	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
 	kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
 	kirkwood_register_gate("usb0",   CGC_BIT_USB0);
@@ -110,6 +110,8 @@ void __init kirkwood_clk_init(void)
 	/* clkdev entries, mapping clks to devices */
 	orion_clkdev_add(NULL, "orion_spi.0", runit);
 	orion_clkdev_add(NULL, "orion_spi.1", runit);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
 }
 
 /*****************************************************************************
@@ -131,7 +133,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE00_ERR);
 }
 
 
@@ -145,7 +147,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE01_ERR);
 }
 
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 4c24b46520aa..ad4d037bbcd3 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -213,7 +213,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR, get_tclk());
+			IRQ_MV78XX0_GE_ERR);
 }
 
 
@@ -224,7 +224,7 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 
@@ -248,7 +248,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge10_init(eth_data,
 			GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 
@@ -272,7 +272,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge11_init(eth_data,
 			GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 2ef82e2f511d..3fc731824e9c 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -109,7 +109,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR, orion5x_tclk);
+			IRQ_ORION5X_ETH_ERR);
 }
 
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index bbe50a948710..a33733bb380d 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -43,6 +43,10 @@ void __init orion_clkdev_init(struct clk *tclk)
 {
 	orion_clkdev_add(NULL, "orion_spi.0", tclk);
 	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk);
 }
 
 /* Fill in the resources structure and link it into the platform
@@ -225,13 +229,11 @@ void __init orion_rtc_init(unsigned long mapbase,
  ****************************************************************************/
 static __init void ge_complete(
 	struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
-	int tclk,
 	struct resource *orion_ge_resource, unsigned long irq,
 	struct platform_device *orion_ge_shared,
 	struct mv643xx_eth_platform_data *eth_data,
 	struct platform_device *orion_ge)
 {
-	orion_ge_shared_data->t_clk = tclk;
 	orion_ge_resource->start = irq;
 	orion_ge_resource->end = irq;
 	eth_data->shared = orion_ge_shared;
@@ -282,12 +284,11 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge00_shared_data, tclk,
+	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
 }
@@ -335,12 +336,11 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge01_shared_data, tclk,
+	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
 }
@@ -388,12 +388,11 @@ static struct platform_device orion_ge10 = {
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge10_shared_data, tclk,
+	ge_complete(&orion_ge10_shared_data,
 		    orion_ge10_resources, irq, &orion_ge10_shared,
 		    eth_data, &orion_ge10);
 }
@@ -441,12 +440,11 @@ static struct platform_device orion_ge11 = {
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge11_shared_data, tclk,
+	ge_complete(&orion_ge11_shared_data,
 		    orion_ge11_resources, irq, &orion_ge11_shared,
 		    eth_data, &orion_ge11);
 }
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index d188a1aa6f56..00d8761c7d28 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -39,29 +39,26 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge00_switch_init(struct dsa_platform_data *d,
 				   int irq);
+
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
 			   unsigned long freq_m);
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 5e1ca0f05090..99cd233266ac 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -57,6 +57,7 @@
 #include <linux/types.h>
 #include <linux/inet_lro.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
 static char mv643xx_eth_driver_version[] = "1.4";
@@ -289,10 +290,10 @@ struct mv643xx_eth_shared_private {
 	/*
 	 * Hardware-specific parameters.
 	 */
-	unsigned int t_clk;
 	int extended_rx_coal_limit;
 	int tx_bw_control;
 	int tx_csum_limit;
+
 };
 
 #define TX_BW_CONTROL_ABSENT		0
@@ -431,6 +432,12 @@ struct mv643xx_eth_private {
 	int tx_desc_sram_size;
 	int txq_count;
 	struct tx_queue txq[8];
+
+	/*
+	 * Hardware-specific parameters.
+	 */
+	struct clk *clk;
+	unsigned int t_clk;
 };
 
 
@@ -1010,7 +1017,7 @@ static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst)
 	int mtu;
 	int bucket_size;
 
-	token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+	token_rate = ((rate / 1000) * 64) / (mp->t_clk / 1000);
 	if (token_rate > 1023)
 		token_rate = 1023;
 
@@ -1042,7 +1049,7 @@ static void txq_set_rate(struct tx_queue *txq, int rate, int burst)
 	int token_rate;
 	int bucket_size;
 
-	token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
+	token_rate = ((rate / 1000) * 64) / (mp->t_clk / 1000);
 	if (token_rate > 1023)
 		token_rate = 1023;
 
@@ -1309,7 +1316,7 @@ static unsigned int get_rx_coal(struct mv643xx_eth_private *mp)
 		temp = (val & 0x003fff00) >> 8;
 
 	temp *= 64000000;
-	do_div(temp, mp->shared->t_clk);
+	do_div(temp, mp->t_clk);
 
 	return (unsigned int)temp;
 }
@@ -1319,7 +1326,7 @@ static void set_rx_coal(struct mv643xx_eth_private *mp, unsigned int usec)
 	u64 temp;
 	u32 val;
 
-	temp = (u64)usec * mp->shared->t_clk;
+	temp = (u64)usec * mp->t_clk;
 	temp += 31999999;
 	do_div(temp, 64000000);
 
@@ -1345,7 +1352,7 @@ static unsigned int get_tx_coal(struct mv643xx_eth_private *mp)
 
 	temp = (rdlp(mp, TX_FIFO_URGENT_THRESHOLD) & 0x3fff0) >> 4;
 	temp *= 64000000;
-	do_div(temp, mp->shared->t_clk);
+	do_div(temp, mp->t_clk);
 
 	return (unsigned int)temp;
 }
@@ -1354,7 +1361,7 @@ static void set_tx_coal(struct mv643xx_eth_private *mp, unsigned int usec)
 {
 	u64 temp;
 
-	temp = (u64)usec * mp->shared->t_clk;
+	temp = (u64)usec * mp->t_clk;
 	temp += 31999999;
 	do_div(temp, 64000000);
 
@@ -2662,10 +2669,6 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	if (dram)
 		mv643xx_eth_conf_mbus_windows(msp, dram);
 
-	/*
-	 * Detect hardware parameters.
-	 */
-	msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
 	msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
 					pd->tx_csum_limit : 9 * 1024;
 	infer_hw_params(msp);
@@ -2890,6 +2893,18 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 
 	mp->dev = dev;
 
+	/*
+	 * Get the clk rate, if there is one, otherwise use the default.
+	 */
+	mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
+	if (!IS_ERR(mp->clk)) {
+		clk_prepare_enable(mp->clk);
+		mp->t_clk = clk_get_rate(mp->clk);
+	} else {
+		mp->t_clk = 133000000;
+		printk(KERN_WARNING "Unable to get clock");
+	}
+
 	set_params(mp, pd);
 	netif_set_real_num_tx_queues(dev, mp->txq_count);
 	netif_set_real_num_rx_queues(dev, mp->rxq_count);
@@ -2978,6 +2993,11 @@ static int mv643xx_eth_remove(struct platform_device *pdev)
 	if (mp->phy != NULL)
 		phy_detach(mp->phy);
 	cancel_work_sync(&mp->tx_timeout_task);
+
+	if (!IS_ERR(mp->clk)) {
+		clk_disable_unprepare(mp->clk);
+		clk_put(mp->clk);
+	}
 	free_netdev(mp->dev);
 
 	platform_set_drvdata(pdev, NULL);
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index 30b0c4e78f91..51bf8ada6dc0 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -18,7 +18,6 @@
 struct mv643xx_eth_shared_platform_data {
 	struct mbus_dram_target_info	*dram;
 	struct platform_device	*shared_smi;
-	unsigned int		t_clk;
 	/*
 	 * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
 	 * limit of 9KiB will be used.
-- 
cgit v1.2.3


From 4f04be62af95119d258b8035f498100e43c8c527 Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 4 Mar 2012 16:57:31 +0100
Subject: ARM: Orion: WDT: Add clk/clkdev support

Remove tclk from platform data.  This makes the platform data
structure empty, so remove it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c              |  3 ++-
 arch/arm/mach-orion5x/common.c               |  2 +-
 arch/arm/plat-orion/common.c                 | 12 +++---------
 arch/arm/plat-orion/include/plat/common.h    |  2 +-
 arch/arm/plat-orion/include/plat/orion_wdt.h | 18 ------------------
 drivers/watchdog/orion_wdt.c                 | 16 ++++++++++------
 6 files changed, 17 insertions(+), 36 deletions(-)
 delete mode 100644 arch/arm/plat-orion/include/plat/orion_wdt.h

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c22354405297..880f3667a2eb 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -112,6 +112,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion_spi.1", runit);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
 }
 
 /*****************************************************************************
@@ -351,7 +352,7 @@ void __init kirkwood_xor1_init(void)
  ****************************************************************************/
 void __init kirkwood_wdt_init(void)
 {
-	orion_wdt_init(kirkwood_tclk);
+	orion_wdt_init();
 }
 
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 3fc731824e9c..067bdd7c06dd 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -193,7 +193,7 @@ static void __init orion5x_crypto_init(void)
  ****************************************************************************/
 void __init orion5x_wdt_init(void)
 {
-	orion_wdt_init(orion5x_tclk);
+	orion_wdt_init();
 }
 
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index a33733bb380d..d349998f72e5 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -19,7 +19,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <plat/orion_wdt.h>
 #include <plat/mv_xor.h>
 #include <plat/ehci-orion.h>
 #include <mach/bridge-regs.h>
@@ -47,6 +46,7 @@ void __init orion_clkdev_init(struct clk *tclk)
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
 }
 
 /* Fill in the resources structure and link it into the platform
@@ -575,24 +575,18 @@ void __init orion_spi_1_init(unsigned long mapbase)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion_wdt_platform_data orion_wdt_data;
-
 static struct resource orion_wdt_resource =
 		DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",
 	.id		= -1,
-	.dev		= {
-		.platform_data	= &orion_wdt_data,
-	},
-	.resource	= &orion_wdt_resource,
 	.num_resources	= 1,
+	.resource	= &orion_wdt_resource,
 };
 
-void __init orion_wdt_init(unsigned long tclk)
+void __init orion_wdt_init(void)
 {
-	orion_wdt_data.tclk = tclk;
 	platform_device_register(&orion_wdt_device);
 }
 
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 00d8761c7d28..c3bfa91bfaa6 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -71,7 +71,7 @@ void __init orion_spi_init(unsigned long mapbase);
 
 void __init orion_spi_1_init(unsigned long mapbase);
 
-void __init orion_wdt_init(unsigned long tclk);
+void __init orion_wdt_init(void);
 
 void __init orion_xor0_init(unsigned long mapbase_low,
 			    unsigned long mapbase_high,
diff --git a/arch/arm/plat-orion/include/plat/orion_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
deleted file mode 100644
index 665c362a2fba..000000000000
--- a/arch/arm/plat-orion/include/plat/orion_wdt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_wdt.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_WDT_H
-#define __PLAT_ORION_WDT_H
-
-struct orion_wdt_platform_data {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
-
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 788aa158e78c..0f5736949c61 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -24,8 +24,8 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/clk.h>
 #include <mach/bridge-regs.h>
-#include <plat/orion_wdt.h>
 
 /*
  * Watchdog timer block registers.
@@ -41,6 +41,7 @@
 static bool nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = -1;		/* module parameter (seconds) */
 static unsigned int wdt_max_duration;	/* (seconds) */
+static struct clk *clk;
 static unsigned int wdt_tclk;
 static void __iomem *wdt_reg;
 static unsigned long wdt_status;
@@ -237,16 +238,16 @@ static struct miscdevice orion_wdt_miscdev = {
 
 static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
-	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *res;
 	int ret;
 
-	if (pdata) {
-		wdt_tclk = pdata->tclk;
-	} else {
-		pr_err("misses platform data\n");
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Orion Watchdog missing clock\n");
 		return -ENODEV;
 	}
+	clk_prepare_enable(clk);
+	wdt_tclk = clk_get_rate(clk);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
@@ -282,6 +283,9 @@ static int __devexit orion_wdt_remove(struct platform_device *pdev)
 	if (!ret)
 		orion_wdt_miscdev.parent = NULL;
 
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+
 	return ret;
 }
 
-- 
cgit v1.2.3


From eee989902aab45f0ca2739727ef615420802649c Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sat, 18 Feb 2012 22:26:42 +0100
Subject: ARM: Orion: SATA: Add per channel clk/clkdev support.

The Orion kirkwood chips have a gatable clock per SATA channel. Add
code to get and enable this clk if it exists.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c |  8 +++++---
 drivers/ata/sata_mv.c           | 40 ++++++++++++++++++++++++++++++++++++----
 2 files changed, 41 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 46d7b4374908..c9fef5b7c56e 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -86,7 +86,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit, *ge0, *ge1;
+	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
@@ -94,8 +94,8 @@ void __init kirkwood_clk_init(void)
 	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
 	ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
 	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
-	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
-	kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
+	sata0 = kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
+	sata1 = kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
 	kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 	kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
@@ -113,6 +113,8 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
 	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add("0", "sata_mv.0", sata0);
+	orion_clkdev_add("1", "sata_mv.0", sata1);
 }
 
 /*****************************************************************************
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7336d4a7ab31..24712adf69df 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -553,6 +553,7 @@ struct mv_host_priv {
 
 #if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
+	struct clk              **port_clks;
 #endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
@@ -4027,6 +4028,9 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct resource *res;
 	int n_ports = 0;
 	int rc;
+#if defined(CONFIG_HAVE_CLK)
+	int port;
+#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4054,6 +4058,13 @@ static int mv_platform_probe(struct platform_device *pdev)
 
 	if (!host || !hpriv)
 		return -ENOMEM;
+#if defined(CONFIG_HAVE_CLK)
+	hpriv->port_clks = devm_kzalloc(&pdev->dev,
+					sizeof(struct clk *) * n_ports,
+					GFP_KERNEL);
+	if (!hpriv->port_clks)
+		return -ENOMEM;
+#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4066,9 +4077,17 @@ static int mv_platform_probe(struct platform_device *pdev)
 #if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
-		dev_notice(&pdev->dev, "cannot get clkdev\n");
+		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
 	else
-		clk_enable(hpriv->clk);
+		clk_prepare_enable(hpriv->clk);
+
+	for (port = 0; port < n_ports; port++) {
+		char port_number[16];
+		sprintf(port_number, "%d", port);
+		hpriv->port_clks[port] = clk_get(&pdev->dev, port_number);
+		if (!IS_ERR(hpriv->port_clks[port]))
+			clk_prepare_enable(hpriv->port_clks[port]);
+	}
 #endif
 
 	/*
@@ -4098,9 +4117,15 @@ static int mv_platform_probe(struct platform_device *pdev)
 err:
 #if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
-		clk_disable(hpriv->clk);
+		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
+	for (port = 0; port < n_ports; port++) {
+		if (!IS_ERR(hpriv->port_clks[port])) {
+			clk_disable_unprepare(hpriv->port_clks[port]);
+			clk_put(hpriv->port_clks[port]);
+		}
+	}
 #endif
 
 	return rc;
@@ -4119,14 +4144,21 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
 	struct ata_host *host = platform_get_drvdata(pdev);
 #if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
+	int port;
 #endif
 	ata_host_detach(host);
 
 #if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
-		clk_disable(hpriv->clk);
+		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
+	for (port = 0; port < host->n_ports; port++) {
+		if (!IS_ERR(hpriv->port_clks[port])) {
+			clk_disable_unprepare(hpriv->port_clks[port]);
+			clk_put(hpriv->port_clks[port]);
+		}
+	}
 #endif
 	return 0;
 }
-- 
cgit v1.2.3


From 8c869edaee07c623066266827371235fb9c12e01 Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 15 Apr 2012 12:53:47 +0200
Subject: ARM: Orion: EHCI: Add support for enabling clocks

Not all platforms support gating the clock, so it is not an error if
the clock does not exist. However, if it does exist, we should
enable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c |  3 ++-
 drivers/usb/host/ehci-orion.c   | 16 ++++++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c9fef5b7c56e..b0f20c0c7d54 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -96,7 +96,7 @@ void __init kirkwood_clk_init(void)
 	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
 	sata0 = kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
 	sata1 = kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
-	kirkwood_register_gate("usb0",   CGC_BIT_USB0);
+	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 	kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
 	kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
@@ -115,6 +115,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion_wdt", tclk);
 	orion_clkdev_add("0", "sata_mv.0", sata0);
 	orion_clkdev_add("1", "sata_mv.0", sata1);
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
 }
 
 /*****************************************************************************
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 6c6a5a3b4ea7..82de1073aa52 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
+#include <linux/clk.h>
 #include <plat/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
@@ -198,6 +199,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
+	struct clk *clk;
 	void __iomem *regs;
 	int irq, err;
 
@@ -238,6 +240,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
+	/* Not all platforms can gate the clock, so it is not
+	   an error if the clock does not exists. */
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_prepare_enable(clk);
+		clk_put(clk);
+	}
+
 	hcd = usb_create_hcd(&ehci_orion_hc_driver,
 			&pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
@@ -301,12 +311,18 @@ err1:
 static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct clk *clk;
 
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3


From 9c2bd504b55ce3e680ae0d3768e78c15fef3448d Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 19 Feb 2012 11:01:22 +0100
Subject: ARM: Orion: NAND: Add support for clk, if there is one.

Not all orion platforms can gate the clock, but if it does exist,
enable/disable it as appropriate.

v2: Fix the name of the clkdev entry.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c |  1 +
 drivers/mtd/nand/orion_nand.c   | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b0f20c0c7d54..99adebce7073 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -116,6 +116,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add("0", "sata_mv.0", sata0);
 	orion_clkdev_add("1", "sata_mv.0", sata1);
 	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion_nand", runit);
 }
 
 /*****************************************************************************
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 1d3bfb26080c..fdc4786ea3e5 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -16,6 +16,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
@@ -77,6 +79,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	struct nand_chip *nc;
 	struct orion_nand_data *board;
 	struct resource *res;
+	struct clk *clk;
 	void __iomem *io_base;
 	int ret = 0;
 
@@ -123,6 +126,14 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mtd);
 
+	/* Not all platforms can gate the clock, so it is not
+	   an error if the clock does not exists. */
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_prepare_enable(clk);
+		clk_put(clk);
+	}
+
 	if (nand_scan(mtd, 1)) {
 		ret = -ENXIO;
 		goto no_dev;
@@ -151,6 +162,7 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 {
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct nand_chip *nc = mtd->priv;
+	struct clk *clk;
 
 	nand_release(mtd);
 
@@ -158,6 +170,12 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 
 	kfree(nc);
 
+	clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From f4f7561e032777cd7376800ac97352d5b1684d8f Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 19 Feb 2012 11:39:27 +0100
Subject: ARM: Orion: SDIO: Add support for clk.

Some orion devices can gate the SDIO clock. If the clock exists,
enable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c |  5 +++--
 drivers/mmc/host/mvsdio.c       | 14 ++++++++++++++
 2 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 99adebce7073..88a1667af4c3 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -86,7 +86,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0;
+	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
@@ -97,7 +97,7 @@ void __init kirkwood_clk_init(void)
 	sata0 = kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
 	sata1 = kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
 	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
-	kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
+	sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
 	kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
 	kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
@@ -117,6 +117,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add("1", "sata_mv.0", sata1);
 	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
 	orion_clkdev_add(NULL, "orion_nand", runit);
+	orion_clkdev_add(NULL, "mvsdio", sdio);
 }
 
 /*****************************************************************************
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index eeb8cd125b0c..3b9136c1a475 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -19,6 +19,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/irq.h>
+#include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 
@@ -51,6 +52,7 @@ struct mvsd_host {
 	struct device *dev;
 	struct resource *res;
 	int irq;
+	struct clk *clk;
 	int gpio_card_detect;
 	int gpio_write_protect;
 };
@@ -770,6 +772,13 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	} else
 		host->irq = irq;
 
+	/* Not all platforms can gate the clock, so it is not
+	   an error if the clock does not exists. */
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(host->clk)) {
+		clk_prepare_enable(host->clk);
+	}
+
 	if (mvsd_data->gpio_card_detect) {
 		ret = gpio_request(mvsd_data->gpio_card_detect,
 				   DRIVER_NAME " cd");
@@ -854,6 +863,11 @@ static int __exit mvsd_remove(struct platform_device *pdev)
 		mvsd_power_down(host);
 		iounmap(host->base);
 		release_resource(host->res);
+
+		if (!IS_ERR(host->clk)) {
+			clk_disable_unprepare(host->clk);
+			clk_put(host->clk);
+		}
 		mmc_free_host(mmc);
 	}
 	platform_set_drvdata(pdev, NULL);
-- 
cgit v1.2.3


From 1f80b126d06cf5c88b7f03a80c79ffd85053688a Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 19 Feb 2012 11:56:19 +0100
Subject: ARM: Orion: CESA: Add support for clk

Some orion platforms support gating of the clock. If the clock exists
enable/disbale it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c |  4 +++-
 drivers/crypto/mv_cesa.c        | 14 ++++++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 88a1667af4c3..b9b341ff91b4 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -87,6 +87,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 void __init kirkwood_clk_init(void)
 {
 	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+	struct clk *crypto;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
@@ -98,7 +99,7 @@ void __init kirkwood_clk_init(void)
 	sata1 = kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
 	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 	sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
-	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+	crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
 	kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
 	kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
 	kirkwood_register_gate("pex0",   CGC_BIT_PEX0);
@@ -118,6 +119,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
 	orion_clkdev_add(NULL, "orion_nand", runit);
 	orion_clkdev_add(NULL, "mvsdio", sdio);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
 }
 
 /*****************************************************************************
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index e6ecc5f23943..1cc6b3f3e262 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -16,6 +16,7 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/clk.h>
 #include <crypto/internal/hash.h>
 #include <crypto/sha.h>
 
@@ -79,6 +80,7 @@ struct crypto_priv {
 	void __iomem *reg;
 	void __iomem *sram;
 	int irq;
+	struct clk *clk;
 	struct task_struct *queue_th;
 
 	/* the lock protects queue and eng_st */
@@ -1053,6 +1055,12 @@ static int mv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_thread;
 
+	/* Not all platforms can gate the clock, so it is not
+	   an error if the clock does not exists. */
+	cp->clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(cp->clk))
+		clk_prepare_enable(cp->clk);
+
 	writel(SEC_INT_ACCEL0_DONE, cpg->reg + SEC_ACCEL_INT_MASK);
 	writel(SEC_CFG_STOP_DIG_ERR, cpg->reg + SEC_ACCEL_CFG);
 	writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
@@ -1118,6 +1126,12 @@ static int mv_remove(struct platform_device *pdev)
 	memset(cp->sram, 0, cp->sram_size);
 	iounmap(cp->sram);
 	iounmap(cp->reg);
+
+	if (!IS_ERR(cp->clk)) {
+		clk_disable_unprepare(cp->clk);
+		clk_put(cp->clk);
+	}
+
 	kfree(cp);
 	cpg = NULL;
 	return 0;
-- 
cgit v1.2.3


From c510182b1c68e2f2bf61e69f6c65bcf61a188809 Mon Sep 17 00:00:00 2001
From: Andrew Lunn
Date: Sun, 19 Feb 2012 13:30:26 +0100
Subject: ARM: Orion: XOR: Add support for clk

Some orion platforms can gate the XOR driver clock. If the clock
exisits, unable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 arch/arm/mach-kirkwood/common.c | 10 +++++-----
 drivers/dma/mv_xor.c            | 15 +++++++++++++++
 drivers/dma/mv_xor.h            |  1 +
 3 files changed, 21 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b9b341ff91b4..ab27d06ac4a5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -87,7 +87,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 void __init kirkwood_clk_init(void)
 {
 	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
-	struct clk *crypto;
+	struct clk *crypto, *xor0, *xor1;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
@@ -100,8 +100,8 @@ void __init kirkwood_clk_init(void)
 	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 	sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 	crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
-	kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
-	kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
+	xor0 = kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
+	xor1 = kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
 	kirkwood_register_gate("pex0",   CGC_BIT_PEX0);
 	kirkwood_register_gate("pex1",   CGC_BIT_PEX1);
 	kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
@@ -120,6 +120,8 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion_nand", runit);
 	orion_clkdev_add(NULL, "mvsdio", sdio);
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
 }
 
 /*****************************************************************************
@@ -336,7 +338,6 @@ void __init kirkwood_crypto_init(void)
 void __init kirkwood_xor0_init(void)
 {
 	kirkwood_clk_ctrl |= CGC_XOR0;
-
 	orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
 			IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
 }
@@ -348,7 +349,6 @@ void __init kirkwood_xor0_init(void)
 void __init kirkwood_xor1_init(void)
 {
 	kirkwood_clk_ctrl |= CGC_XOR1;
-
 	orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
 			IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
 }
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index fa5d55fea46c..0b12e68bf79c 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
+#include <linux/clk.h>
 #include <plat/mv_xor.h>
 
 #include "dmaengine.h"
@@ -1307,11 +1308,25 @@ static int mv_xor_shared_probe(struct platform_device *pdev)
 	if (dram)
 		mv_xor_conf_mbus_windows(msp, dram);
 
+	/* Not all platforms can gate the clock, so it is not
+	 * an error if the clock does not exists.
+	 */
+	msp->clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(msp->clk))
+		clk_prepare_enable(msp->clk);
+
 	return 0;
 }
 
 static int mv_xor_shared_remove(struct platform_device *pdev)
 {
+	struct mv_xor_shared_private *msp = platform_get_drvdata(pdev);
+
+	if (!IS_ERR(msp->clk)) {
+		clk_disable_unprepare(msp->clk);
+		clk_put(msp->clk);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
index 654876b7ba1d..a5b422f5a8ab 100644
--- a/drivers/dma/mv_xor.h
+++ b/drivers/dma/mv_xor.h
@@ -55,6 +55,7 @@
 struct mv_xor_shared_private {
 	void __iomem	*xor_base;
 	void __iomem	*xor_high_base;
+	struct clk	*clk;
 };
 
 
-- 
cgit v1.2.3


From 55b8fd4f428501b0f35d62b8313311fd9863c188 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Tue, 10 Apr 2012 09:02:35 +0530
Subject: SPEAr: clk: Add VCO-PLL Synthesizer clock

All SPEAr SoC's contain PLLs. Their Fout is derived based on following equations

- In normal mode
  vco = (2 * M[15:8] * Fin)/N

- In Dithered mode
  vco = (2 * M[15:0] * Fin)/(256 * N)

pll_rate = vco/2^p

vco and pll are very closely bound to each other,
"vco needs to program: mode, m & n" and "pll needs to program p",
both share common enable/disable logic and registers.

This patch adds in support for this type of clock.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/Makefile            |   3 +
 drivers/clk/spear/Makefile      |   5 +
 drivers/clk/spear/clk-vco-pll.c | 363 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/spear/clk.c         |  36 ++++
 drivers/clk/spear/clk.h         |  58 +++++++
 5 files changed, 465 insertions(+)
 create mode 100644 drivers/clk/spear/Makefile
 create mode 100644 drivers/clk/spear/clk-vco-pll.c
 create mode 100644 drivers/clk/spear/clk.c
 create mode 100644 drivers/clk/spear/clk.h

(limited to 'drivers')

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 24aa7144811b..0f5e03d1ef5c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,3 +2,6 @@
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
+
+# SoCs specific
+obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
new file mode 100644
index 000000000000..3fc2a3026cc1
--- /dev/null
+++ b/drivers/clk/spear/Makefile
@@ -0,0 +1,5 @@
+#
+# SPEAr Clock specific Makefile
+#
+
+obj-y	+= clk.o clk-vco-pll.o
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
new file mode 100644
index 000000000000..dcd4bdf4b0d9
--- /dev/null
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * VCO-PLL clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-vco-pll: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: VCO-PLL clock
+ *
+ * VCO and PLL rate are derived from following equations:
+ *
+ * In normal mode
+ * vco = (2 * M[15:8] * Fin)/N
+ *
+ * In Dithered mode
+ * vco = (2 * M[15:0] * Fin)/(256 * N)
+ *
+ * pll_rate = pll/2^p
+ *
+ * vco and pll are very closely bound to each other, "vco needs to program:
+ * mode, m & n" and "pll needs to program p", both share common enable/disable
+ * logic.
+ *
+ * clk_register_vco_pll() registers instances of both vco & pll.
+ * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its
+ * set_rate to vco. A single rate table exists for both the clocks, which
+ * configures m, n and p.
+ */
+
+/* PLL_CTR register masks */
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSM	2
+#define PLL_MODE_DITH_SSM	3
+#define PLL_MODE_MASK		3
+#define PLL_MODE_SHIFT		3
+#define PLL_ENABLE		2
+
+#define PLL_LOCK_SHIFT		0
+#define PLL_LOCK_MASK		1
+
+/* PLL FRQ register masks */
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DIV_P_MASK		0x7
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_N_SHIFT		0
+
+#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw)
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Calculates pll clk rate for specific value of mode, m, n and p */
+static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl,
+		unsigned long prate, int index, unsigned long *pll_rate)
+{
+	unsigned long rate = prate;
+	unsigned int mode;
+
+	mode = rtbl[index].mode ? 256 : 1;
+	rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n));
+
+	if (pll_rate)
+		*pll_rate = (rate / (1 << rtbl[index].p)) * 10000;
+
+	return rate * 10000;
+}
+
+static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate,
+				unsigned long *prate, int *index)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	unsigned long prev_rate, vco_prev_rate, rate = 0;
+	unsigned long vco_parent_rate =
+		__clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
+
+	if (!prate) {
+		pr_err("%s: prate is must for pll clk\n", __func__);
+		return -EINVAL;
+	}
+
+	for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) {
+		prev_rate = rate;
+		vco_prev_rate = *prate;
+		*prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index,
+				&rate);
+		if (drate < rate) {
+			/* previous clock was best */
+			if (*index) {
+				rate = prev_rate;
+				*prate = vco_prev_rate;
+				(*index)--;
+			}
+			break;
+		}
+	}
+
+	return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long *prate)
+{
+	int unused;
+
+	return clk_pll_round_rate_index(hw, drate, prate, &unused);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long
+		parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	unsigned long flags = 0;
+	unsigned int p;
+
+	if (pll->vco->lock)
+		spin_lock_irqsave(pll->vco->lock, flags);
+
+	p = readl_relaxed(pll->vco->cfg_reg);
+
+	if (pll->vco->lock)
+		spin_unlock_irqrestore(pll->vco->lock, flags);
+
+	p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+
+	return parent_rate / (1 << p);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	struct pll_rate_tbl *rtbl = pll->vco->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_pll_round_rate_index(hw, drate, NULL, &i);
+
+	if (pll->vco->lock)
+		spin_lock_irqsave(pll->vco->lock, flags);
+
+	val = readl_relaxed(pll->vco->cfg_reg);
+	val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT);
+	val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT;
+	writel_relaxed(val, pll->vco->cfg_reg);
+
+	if (pll->vco->lock)
+		spin_unlock_irqrestore(pll->vco->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_pll_ops = {
+	.recalc_rate = clk_pll_recalc_rate,
+	.round_rate = clk_pll_round_rate,
+	.set_rate = clk_pll_set_rate,
+};
+
+static inline unsigned long vco_calc_rate(struct clk_hw *hw,
+		unsigned long prate, int index)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+
+	return pll_calc_rate(vco->rtbl, prate, index, NULL);
+}
+
+static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, vco_calc_rate,
+			vco->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	unsigned long flags = 0;
+	unsigned int num = 2, den = 0, val, mode = 0;
+
+	if (vco->lock)
+		spin_lock_irqsave(vco->lock, flags);
+
+	mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK;
+
+	val = readl_relaxed(vco->cfg_reg);
+
+	if (vco->lock)
+		spin_unlock_irqrestore(vco->lock, flags);
+
+	den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+	/* calculate numerator & denominator */
+	if (!mode) {
+		/* Normal mode */
+		num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+	} else {
+		/* Dithered mode */
+		num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+		den *= 256;
+	}
+
+	if (!den) {
+		WARN(1, "%s: denominator can't be zero\n", __func__);
+		return 0;
+	}
+
+	return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of vco */
+static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_vco *vco = to_clk_vco(hw);
+	struct pll_rate_tbl *rtbl = vco->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt,
+			&i);
+
+	if (vco->lock)
+		spin_lock_irqsave(vco->lock, flags);
+
+	val = readl_relaxed(vco->mode_reg);
+	val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT);
+	val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT;
+	writel_relaxed(val, vco->mode_reg);
+
+	val = readl_relaxed(vco->cfg_reg);
+	val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT);
+	val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT;
+
+	val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT);
+	if (rtbl[i].mode)
+		val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) <<
+			PLL_DITH_FDBK_M_SHIFT;
+	else
+		val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) <<
+			PLL_NORM_FDBK_M_SHIFT;
+
+	writel_relaxed(val, vco->cfg_reg);
+
+	if (vco->lock)
+		spin_unlock_irqrestore(vco->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_vco_ops = {
+	.recalc_rate = clk_vco_recalc_rate,
+	.round_rate = clk_vco_round_rate,
+	.set_rate = clk_vco_set_rate,
+};
+
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+		const char *vco_gate_name, const char *parent_name,
+		unsigned long flags, void __iomem *mode_reg, void __iomem
+		*cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+		spinlock_t *lock, struct clk **pll_clk,
+		struct clk **vco_gate_clk)
+{
+	struct clk_vco *vco;
+	struct clk_pll *pll;
+	struct clk *vco_clk, *tpll_clk, *tvco_gate_clk;
+	struct clk_init_data vco_init, pll_init;
+	const char **vco_parent_name;
+
+	if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg ||
+			!rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+	if (!vco) {
+		pr_err("could not allocate vco clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll) {
+		pr_err("could not allocate pll clk\n");
+		goto free_vco;
+	}
+
+	/* struct clk_vco assignments */
+	vco->mode_reg = mode_reg;
+	vco->cfg_reg = cfg_reg;
+	vco->rtbl = rtbl;
+	vco->rtbl_cnt = rtbl_cnt;
+	vco->lock = lock;
+	vco->hw.init = &vco_init;
+
+	pll->vco = vco;
+	pll->hw.init = &pll_init;
+
+	if (vco_gate_name) {
+		tvco_gate_clk = clk_register_gate(NULL, vco_gate_name,
+				parent_name, 0, mode_reg, PLL_ENABLE, 0, lock);
+		if (IS_ERR_OR_NULL(tvco_gate_clk))
+			goto free_pll;
+
+		if (vco_gate_clk)
+			*vco_gate_clk = tvco_gate_clk;
+		vco_parent_name = &vco_gate_name;
+	} else {
+		vco_parent_name = &parent_name;
+	}
+
+	vco_init.name = vco_name;
+	vco_init.ops = &clk_vco_ops;
+	vco_init.flags = flags;
+	vco_init.parent_names = vco_parent_name;
+	vco_init.num_parents = 1;
+
+	pll_init.name = pll_name;
+	pll_init.ops = &clk_pll_ops;
+	pll_init.flags = CLK_SET_RATE_PARENT;
+	pll_init.parent_names = &vco_name;
+	pll_init.num_parents = 1;
+
+	vco_clk = clk_register(NULL, &vco->hw);
+	if (IS_ERR_OR_NULL(vco_clk))
+		goto free_pll;
+
+	tpll_clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR_OR_NULL(tpll_clk))
+		goto free_pll;
+
+	if (pll_clk)
+		*pll_clk = tpll_clk;
+
+	return vco_clk;
+
+free_pll:
+	kfree(pll);
+free_vco:
+	kfree(vco);
+
+	pr_err("Failed to register vco pll clock\n");
+
+	return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
new file mode 100644
index 000000000000..376d4e5ff326
--- /dev/null
+++ b/drivers/clk/spear/clk.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * SPEAr clk - Common routines
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include "clk.h"
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+		unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+		int *index)
+{
+	unsigned long prev_rate, rate = 0;
+
+	for (*index = 0; *index < rtbl_cnt; (*index)++) {
+		prev_rate = rate;
+		rate = calc_rate(hw, parent_rate, *index);
+		if (drate < rate) {
+			/* previous clock was best */
+			if (*index) {
+				rate = prev_rate;
+				(*index)--;
+			}
+			break;
+		}
+	}
+
+	return rate;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
new file mode 100644
index 000000000000..9979b7f7e767
--- /dev/null
+++ b/drivers/clk/spear/clk.h
@@ -0,0 +1,58 @@
+/*
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_CLK_H
+#define __SPEAR_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+
+/* VCO-PLL clk */
+struct pll_rate_tbl {
+	u8 mode;
+	u16 m;
+	u8 n;
+	u8 p;
+};
+
+struct clk_vco {
+	struct			clk_hw hw;
+	void __iomem		*mode_reg;
+	void __iomem		*cfg_reg;
+	struct pll_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
+struct clk_pll {
+	struct			clk_hw hw;
+	struct clk_vco		*vco;
+	const char		*parent[1];
+	spinlock_t		*lock;
+};
+
+typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
+		int index);
+
+/* clk register routines */
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+		const char *vco_gate_name, const char *parent_name,
+		unsigned long flags, void __iomem *mode_reg, void __iomem
+		*cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+		spinlock_t *lock, struct clk **pll_clk,
+		struct clk **vco_gate_clk);
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+		unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+		int *index);
+
+#endif /* __SPEAR_CLK_H */
-- 
cgit v1.2.3


From 5335a639ecc5646cbe8e99086fb7e743b801ac58 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Wed, 11 Apr 2012 18:04:23 +0530
Subject: SPEAr: clk: Add Auxiliary Synthesizer clock

All SPEAr SoC's contain Auxiliary Synthesizers. Their Fout is derived based on
values of eq, x and y.

Fout from synthesizer can be given from two equations:
Fout1 = (Fin * X/Y)/2		EQ1
Fout2 = Fin * X/Y		EQ2

This patch adds in support for this type of clock.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/spear/Makefile        |   2 +-
 drivers/clk/spear/clk-aux-synth.c | 198 ++++++++++++++++++++++++++++++++++++++
 drivers/clk/spear/clk.h           |  43 +++++++++
 3 files changed, 242 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/spear/clk-aux-synth.c

(limited to 'drivers')

diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
index 3fc2a3026cc1..e36d8c665724 100644
--- a/drivers/clk/spear/Makefile
+++ b/drivers/clk/spear/Makefile
@@ -2,4 +2,4 @@
 # SPEAr Clock specific Makefile
 #
 
-obj-y	+= clk.o clk-vco-pll.o
+obj-y	+= clk.o clk-aux-synth.o clk-vco-pll.o
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
new file mode 100644
index 000000000000..af34074e702b
--- /dev/null
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Auxiliary Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-aux-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: Auxiliary Synthesizer clock
+ *
+ * Aux synth gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2		EQ1
+ * Fout2 = Fin * X/Y			EQ2
+ */
+
+#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw)
+
+static struct aux_clk_masks default_aux_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = AUX_XSCALE_MASK,
+	.xscale_sel_shift = AUX_XSCALE_SHIFT,
+	.yscale_sel_mask = AUX_YSCALE_MASK,
+	.yscale_sel_shift = AUX_YSCALE_SHIFT,
+	.enable_bit = AUX_SYNT_ENB,
+};
+
+static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	struct aux_rate_tbl *rtbl = aux->rtbl;
+	u8 eq = rtbl[index].eq ? 1 : 2;
+
+	return (((prate / 10000) * rtbl[index].xscale) /
+			(rtbl[index].yscale * eq)) * 10000;
+}
+
+static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, aux_calc_rate,
+			aux->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_aux_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	unsigned int num = 1, den = 1, val, eqn;
+	unsigned long flags = 0;
+
+	if (aux->lock)
+		spin_lock_irqsave(aux->lock, flags);
+
+	val = readl_relaxed(aux->reg);
+
+	if (aux->lock)
+		spin_unlock_irqrestore(aux->lock, flags);
+
+	eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask;
+	if (eqn == aux->masks->eq1_mask)
+		den = 2;
+
+	/* calculate numerator */
+	num = (val >> aux->masks->xscale_sel_shift) &
+		aux->masks->xscale_sel_mask;
+
+	/* calculate denominator */
+	den *= (val >> aux->masks->yscale_sel_shift) &
+		aux->masks->yscale_sel_mask;
+
+	if (!den)
+		return 0;
+
+	return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of aux */
+static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_aux *aux = to_clk_aux(hw);
+	struct aux_rate_tbl *rtbl = aux->rtbl;
+	unsigned long val, flags = 0;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt,
+			&i);
+
+	if (aux->lock)
+		spin_lock_irqsave(aux->lock, flags);
+
+	val = readl_relaxed(aux->reg) &
+		~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift);
+	val |= (rtbl[i].eq & aux->masks->eq_sel_mask) <<
+		aux->masks->eq_sel_shift;
+	val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift);
+	val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) <<
+		aux->masks->xscale_sel_shift;
+	val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift);
+	val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) <<
+		aux->masks->yscale_sel_shift;
+	writel_relaxed(val, aux->reg);
+
+	if (aux->lock)
+		spin_unlock_irqrestore(aux->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_aux_ops = {
+	.recalc_rate = clk_aux_recalc_rate,
+	.round_rate = clk_aux_round_rate,
+	.set_rate = clk_aux_set_rate,
+};
+
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+		const char *parent_name, unsigned long flags, void __iomem *reg,
+		struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+		u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk)
+{
+	struct clk_aux *aux;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+	if (!aux) {
+		pr_err("could not allocate aux clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_aux assignments */
+	if (!masks)
+		aux->masks = &default_aux_masks;
+	else
+		aux->masks = masks;
+
+	aux->reg = reg;
+	aux->rtbl = rtbl;
+	aux->rtbl_cnt = rtbl_cnt;
+	aux->lock = lock;
+	aux->hw.init = &init;
+
+	init.name = aux_name;
+	init.ops = &clk_aux_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &aux->hw);
+	if (IS_ERR_OR_NULL(clk))
+		goto free_aux;
+
+	if (gate_name) {
+		struct clk *tgate_clk;
+
+		tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+				aux->masks->enable_bit, 0, lock);
+		if (IS_ERR_OR_NULL(tgate_clk))
+			goto free_aux;
+
+		if (gate_clk)
+			*gate_clk = tgate_clk;
+	}
+
+	return clk;
+
+free_aux:
+	kfree(aux);
+	pr_err("clk register failed\n");
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index 9979b7f7e767..c2290800503a 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -16,6 +16,45 @@
 #include <linux/spinlock_types.h>
 #include <linux/types.h>
 
+/* Auxiliary Synth clk */
+/* Default masks */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+#define AUX_SYNT_ENB		31
+
+struct aux_clk_masks {
+	u32 eq_sel_mask;
+	u32 eq_sel_shift;
+	u32 eq1_mask;
+	u32 eq2_mask;
+	u32 xscale_sel_mask;
+	u32 xscale_sel_shift;
+	u32 yscale_sel_mask;
+	u32 yscale_sel_shift;
+	u32 enable_bit;
+};
+
+struct aux_rate_tbl {
+	u16 xscale;
+	u16 yscale;
+	u8 eq;
+};
+
+struct clk_aux {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct aux_clk_masks	*masks;
+	struct aux_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
 /* VCO-PLL clk */
 struct pll_rate_tbl {
 	u8 mode;
@@ -44,6 +83,10 @@ typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
 		int index);
 
 /* clk register routines */
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+		const char *parent_name, unsigned long flags, void __iomem *reg,
+		struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+		u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
 struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
 		const char *vco_gate_name, const char *parent_name,
 		unsigned long flags, void __iomem *mode_reg, void __iomem
-- 
cgit v1.2.3


From 270b9f421e66ee5d135c99ba1c2b883c7750ab6c Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Wed, 11 Apr 2012 18:04:23 +0530
Subject: SPEAr: clk: Add Fractional Synthesizer clock

All SPEAr SoC's contain Fractional Synthesizers. Their Fout is derived from
following equations:

Fout = Fin / (2 * div) (division factor)
div is 17 bits:-
     0-13 (fractional part)
     14-16 (integer part)
     div is (16-14 bits).(13-0 bits) (in binary)

     Fout = Fin/(2 * div)
     Fout = ((Fin / 10000)/(2 * div)) * 10000
     Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
     Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000

div << 14 is simply 17 bit value written at register.

This patch adds in support for this type of clock.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/spear/Makefile         |   2 +-
 drivers/clk/spear/clk-frac-synth.c | 165 +++++++++++++++++++++++++++++++++++++
 drivers/clk/spear/clk.h            |  16 ++++
 3 files changed, 182 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/spear/clk-frac-synth.c

(limited to 'drivers')

diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
index e36d8c665724..182703622195 100644
--- a/drivers/clk/spear/Makefile
+++ b/drivers/clk/spear/Makefile
@@ -2,4 +2,4 @@
 # SPEAr Clock specific Makefile
 #
 
-obj-y	+= clk.o clk-aux-synth.o clk-vco-pll.o
+obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-vco-pll.o
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
new file mode 100644
index 000000000000..4dbdb3fe18e0
--- /dev/null
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Fractional Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-frac-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define DIV_FACTOR_MASK		0x1FFFF
+
+/*
+ * DOC: Fractional Synthesizer clock
+ *
+ * Fout from synthesizer can be given from below equation:
+ *
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ *	0-13 (fractional part)
+ *	14-16 (integer part)
+ *	div is (16-14 bits).(13-0 bits) (in binary)
+ *
+ *	Fout = Fin/(2 * div)
+ *	Fout = ((Fin / 10000)/(2 * div)) * 10000
+ *	Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
+ *	Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000
+ *
+ * div << 14 simply 17 bit value written at register.
+ * Max error due to scaling down by 10000 is 10 KHz
+ */
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	struct frac_rate_tbl *rtbl = frac->rtbl;
+
+	prate /= 10000;
+	prate <<= 14;
+	prate /= (2 * rtbl[index].div);
+	prate *= 10000;
+
+	return prate;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, frac_calc_rate,
+			frac->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long flags = 0;
+	unsigned int div = 1, val;
+
+	if (frac->lock)
+		spin_lock_irqsave(frac->lock, flags);
+
+	val = readl_relaxed(frac->reg);
+
+	if (frac->lock)
+		spin_unlock_irqrestore(frac->lock, flags);
+
+	div = val & DIV_FACTOR_MASK;
+
+	if (!div)
+		return 0;
+
+	parent_rate = parent_rate / 10000;
+
+	parent_rate = (parent_rate << 14) / (2 * div);
+	return parent_rate * 10000;
+}
+
+/* Configures new clock rate of frac */
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	struct frac_rate_tbl *rtbl = frac->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt,
+			&i);
+
+	if (frac->lock)
+		spin_lock_irqsave(frac->lock, flags);
+
+	val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK;
+	val |= rtbl[i].div & DIV_FACTOR_MASK;
+	writel_relaxed(val, frac->reg);
+
+	if (frac->lock)
+		spin_unlock_irqrestore(frac->lock, flags);
+
+	return 0;
+}
+
+struct clk_ops clk_frac_ops = {
+	.recalc_rate = clk_frac_recalc_rate,
+	.round_rate = clk_frac_round_rate,
+	.set_rate = clk_frac_set_rate,
+};
+
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+		unsigned long flags, void __iomem *reg,
+		struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_frac *frac;
+	struct clk *clk;
+
+	if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+	if (!frac) {
+		pr_err("could not allocate frac clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_frac assignments */
+	frac->reg = reg;
+	frac->rtbl = rtbl;
+	frac->rtbl_cnt = rtbl_cnt;
+	frac->lock = lock;
+	frac->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_frac_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &frac->hw);
+	if (!IS_ERR_OR_NULL(clk))
+		return clk;
+
+	pr_err("clk register failed\n");
+	kfree(frac);
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index c2290800503a..ac9030bbd6ce 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -55,6 +55,19 @@ struct clk_aux {
 	spinlock_t		*lock;
 };
 
+/* Fractional Synth clk */
+struct frac_rate_tbl {
+	u32 div;
+};
+
+struct clk_frac {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct frac_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
 /* VCO-PLL clk */
 struct pll_rate_tbl {
 	u8 mode;
@@ -87,6 +100,9 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
 		const char *parent_name, unsigned long flags, void __iomem *reg,
 		struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
 		u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+		unsigned long flags, void __iomem *reg,
+		struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
 struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
 		const char *vco_gate_name, const char *parent_name,
 		unsigned long flags, void __iomem *mode_reg, void __iomem
-- 
cgit v1.2.3


From a45896bd3a4b7beb571fa704efa7c2782b791093 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Wed, 11 Apr 2012 18:04:23 +0530
Subject: SPEAr: clk: Add General Purpose Timer Synthesizer clock

All SPEAr SoC's contain GPT Synthesizers. Their Fout is derived from
following equations:

Fout= Fin/((2 ^ (N+1)) * (M+1))

This patch adds in support for this type of clock.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/spear/Makefile        |   2 +-
 drivers/clk/spear/clk-gpt-synth.c | 154 ++++++++++++++++++++++++++++++++++++++
 drivers/clk/spear/clk.h           |  17 +++++
 3 files changed, 172 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/spear/clk-gpt-synth.c

(limited to 'drivers')

diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
index 182703622195..9e64824a8000 100644
--- a/drivers/clk/spear/Makefile
+++ b/drivers/clk/spear/Makefile
@@ -2,4 +2,4 @@
 # SPEAr Clock specific Makefile
 #
 
-obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-vco-pll.o
+obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
new file mode 100644
index 000000000000..b471c9762a97
--- /dev/null
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * General Purpose Timer Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-gpt-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+/*
+ * DOC: General Purpose Timer Synthesizer clock
+ *
+ * Calculates gpt synth clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+
+#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw)
+
+static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate,
+		int index)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	struct gpt_rate_tbl *rtbl = gpt->rtbl;
+
+	prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1));
+
+	return prate;
+}
+
+static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *prate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	int unused;
+
+	return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate,
+			gpt->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	unsigned long flags = 0;
+	unsigned int div = 1, val;
+
+	if (gpt->lock)
+		spin_lock_irqsave(gpt->lock, flags);
+
+	val = readl_relaxed(gpt->reg);
+
+	if (gpt->lock)
+		spin_unlock_irqrestore(gpt->lock, flags);
+
+	div += val & GPT_MSCALE_MASK;
+	div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+
+	if (!div)
+		return 0;
+
+	return parent_rate / div;
+}
+
+/* Configures new clock rate of gpt */
+static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate,
+				unsigned long prate)
+{
+	struct clk_gpt *gpt = to_clk_gpt(hw);
+	struct gpt_rate_tbl *rtbl = gpt->rtbl;
+	unsigned long flags = 0, val;
+	int i;
+
+	clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt,
+			&i);
+
+	if (gpt->lock)
+		spin_lock_irqsave(gpt->lock, flags);
+
+	val = readl(gpt->reg) & ~GPT_MSCALE_MASK;
+	val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT);
+
+	val |= rtbl[i].mscale & GPT_MSCALE_MASK;
+	val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT;
+
+	writel_relaxed(val, gpt->reg);
+
+	if (gpt->lock)
+		spin_unlock_irqrestore(gpt->lock, flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_gpt_ops = {
+	.recalc_rate = clk_gpt_recalc_rate,
+	.round_rate = clk_gpt_round_rate,
+	.set_rate = clk_gpt_set_rate,
+};
+
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+		long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+		rtbl_cnt, spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_gpt *gpt;
+	struct clk *clk;
+
+	if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+		pr_err("Invalid arguments passed");
+		return ERR_PTR(-EINVAL);
+	}
+
+	gpt = kzalloc(sizeof(*gpt), GFP_KERNEL);
+	if (!gpt) {
+		pr_err("could not allocate gpt clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_gpt assignments */
+	gpt->reg = reg;
+	gpt->rtbl = rtbl;
+	gpt->rtbl_cnt = rtbl_cnt;
+	gpt->lock = lock;
+	gpt->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_gpt_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(NULL, &gpt->hw);
+	if (!IS_ERR_OR_NULL(clk))
+		return clk;
+
+	pr_err("clk register failed\n");
+	kfree(gpt);
+
+	return NULL;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index ac9030bbd6ce..3321c46a071c 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -68,6 +68,20 @@ struct clk_frac {
 	spinlock_t		*lock;
 };
 
+/* GPT clk */
+struct gpt_rate_tbl {
+	u16 mscale;
+	u16 nscale;
+};
+
+struct clk_gpt {
+	struct			clk_hw hw;
+	void __iomem		*reg;
+	struct gpt_rate_tbl	*rtbl;
+	u8			rtbl_cnt;
+	spinlock_t		*lock;
+};
+
 /* VCO-PLL clk */
 struct pll_rate_tbl {
 	u8 mode;
@@ -103,6 +117,9 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
 struct clk *clk_register_frac(const char *name, const char *parent_name,
 		unsigned long flags, void __iomem *reg,
 		struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+		long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+		rtbl_cnt, spinlock_t *lock);
 struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
 		const char *vco_gate_name, const char *parent_name,
 		unsigned long flags, void __iomem *mode_reg, void __iomem
-- 
cgit v1.2.3


From 5df33a62c4a028d6fc7f2dcc159827d09b7334b8 Mon Sep 17 00:00:00 2001
From: Viresh Kumar
Date: Tue, 10 Apr 2012 09:02:35 +0530
Subject: SPEAr: Switch to common clock framework

SPEAr SoCs used its own clock framework since now. From now on they will move to
use common clock framework.

This patch updates existing SPEAr machine support to adapt for common clock
framework.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 MAINTAINERS                                     |    4 +-
 arch/arm/Kconfig                                |    1 +
 arch/arm/mach-spear3xx/Makefile                 |    2 +-
 arch/arm/mach-spear3xx/clock.c                  |  760 -----------------
 arch/arm/mach-spear3xx/include/mach/generic.h   |    3 +-
 arch/arm/mach-spear3xx/include/mach/misc_regs.h |  144 +---
 arch/arm/mach-spear3xx/include/mach/spear.h     |   13 +
 arch/arm/mach-spear3xx/spear320.c               |    1 +
 arch/arm/mach-spear3xx/spear3xx.c               |    2 +
 arch/arm/mach-spear6xx/Makefile                 |    2 +-
 arch/arm/mach-spear6xx/clock.c                  |  683 ---------------
 arch/arm/mach-spear6xx/include/mach/misc_regs.h |  154 +---
 arch/arm/mach-spear6xx/spear6xx.c               |    5 +-
 arch/arm/plat-spear/Makefile                    |    2 +-
 arch/arm/plat-spear/clock.c                     | 1005 -----------------------
 arch/arm/plat-spear/include/plat/clock.h        |  249 ------
 drivers/clk/spear/Makefile                      |    3 +
 drivers/clk/spear/spear3xx_clock.c              |  612 ++++++++++++++
 drivers/clk/spear/spear6xx_clock.c              |  342 ++++++++
 19 files changed, 983 insertions(+), 3004 deletions(-)
 delete mode 100644 arch/arm/mach-spear3xx/clock.c
 delete mode 100644 arch/arm/mach-spear6xx/clock.c
 delete mode 100644 arch/arm/plat-spear/clock.c
 delete mode 100644 arch/arm/plat-spear/include/plat/clock.h
 create mode 100644 drivers/clk/spear/spear3xx_clock.c
 create mode 100644 drivers/clk/spear/spear6xx_clock.c

(limited to 'drivers')

diff --git a/MAINTAINERS b/MAINTAINERS
index 164e9a1df0f6..cb5425e3cd42 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6336,9 +6336,7 @@ L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/mach-spear*/clock.c
-F:	arch/arm/plat-spear/clock.c
-F:	arch/arm/plat-spear/include/plat/clock.h
+F:	drivers/clk/spear/
 
 SPEAR PAD MULTIPLEXING SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d40342c..ce030c242644 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -980,6 +980,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b24862489704..5b30d0d10892 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,7 +3,7 @@
 #
 
 # common files
-obj-y	+= spear3xx.o clock.o
+obj-y	+= spear3xx.o
 
 # spear300 specific files
 obj-$(CONFIG_MACH_SPEAR300) += spear300.o
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index 6c4841f55223..000000000000
--- a/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_24m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
-	{
-		.pclk = &gpt1_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt1_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT1_CLK_ENB,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT2_CLK_ENB,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = C3_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
-	defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll3_48m_clk,
-	.recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
-	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-};
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
-};
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
-{
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
-
-	clk_init();
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5a98d2..15c107aad202 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -36,8 +36,8 @@ extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
 
 /* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
 void __init spear_setup_timer(void);
+void __init spear3xx_clk_init(void);
 void __init spear3xx_map_io(void);
 void __init spear3xx_init_irq(void);
 void __init spear3xx_init(void);
@@ -156,7 +156,6 @@ extern struct pmx_dev spear310_pmx_tdm0;
 /* Add spear310 machine function declarations here */
 void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		u8 pmx_dev_count);
-
 #endif /* CONFIG_MACH_SPEAR310 */
 
 /* spear320 declarations */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8d4852..50cfe0d1a7c4 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -15,150 +15,8 @@
 #define __MACH_MISC_REGS_H
 
 #include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
 
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
-#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
-
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd98356919..881109522060 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -78,4 +78,17 @@
 #define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
 #define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
 
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	UL(0xFE000000)
+#define SPEAR320_CONTROL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+	#define SPEAR320_UARTX_PCLK_MASK		0x1
+	#define SPEAR320_UART2_PCLK_SHIFT		8
+	#define SPEAR320_UART3_PCLK_SHIFT		9
+	#define SPEAR320_UART4_PCLK_SHIFT		10
+	#define SPEAR320_UART5_PCLK_SHIFT		11
+	#define SPEAR320_UART6_PCLK_SHIFT		12
+	#define SPEAR320_RS485_PCLK_SHIFT		13
+
 #endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index deaaf199612c..bfdad554319c 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -16,6 +16,7 @@
 #include <plat/shirq.h>
 #include <mach/generic.h>
 #include <mach/hardware.h>
+#include <mach/spear.h>
 
 /* pad multiplexing support */
 /* muxing registers */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index b1733c37f209..2625ab9a6c8b 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -511,6 +511,8 @@ static void __init spear3xx_timer_init(void)
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear3xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750552fc..898831d93f37 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
 #
 
 # common files
-obj-y	+= clock.o spear6xx.o
+obj-y	+= spear6xx.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index a86499a8a15f..000000000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_30m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART0_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART1_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
-	.synth_reg = CLCD_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
-	.en_reg = CLCD_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
-	{
-		.pclk = &clcd_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
-	.pclk_info = clcd_pclk_info,
-	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = CLCD_CLK_ENB,
-	.pclk_sel = &clcd_pclk_sel,
-	.pclk_sel_shift = CLCD_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
-	{
-		.pclk = &gpt3_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
-	.pclk_info = gpt3_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt3_pclk_sel,
-	.pclk_sel_shift = GPT3_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FSMC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
-	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
-};
-
-void __init spear6xx_clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a007b0d..633074fddf9a 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -15,160 +15,8 @@
 #define __MACH_MISC_REGS_H
 
 #include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
 
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
-#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
-
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2ed8b14c82c8..771e19e3c43c 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -56,9 +56,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
 void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear6xx_clk_init();
 }
 
 static void __init spear6xx_timer_init(void)
@@ -66,6 +63,8 @@ static void __init spear6xx_timer_init(void)
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear6xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index e0f2e5b9530c..8c0cb6a965a3 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
 #
 
 # Common support
-obj-y	:= clock.o restart.o time.o
+obj-y	:= restart.o time.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd00381ea6..000000000000
--- a/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return -EFAULT;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val &= ~(1 << clk->en_reg_bit);
-	else
-		val |= 1 << clk->en_reg_bit;
-
-	writel(val, clk->en_reg);
-
-	return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val |= 1 << clk->en_reg_bit;
-	else
-		val &= ~(1 << clk->en_reg_bit);
-
-	writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
-	.enable = generic_clk_enable,
-	.disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
-	unsigned int val, i;
-	struct pclk_info *info = NULL;
-
-	val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
-		& clk->pclk_sel->pclk_sel_mask;
-
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk_val == val)
-			info = &clk->pclk_sel->pclk_info[i];
-	}
-
-	return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_del(&clk->sibling);
-	list_add(&clk->sibling, &pclk_info->pclk->children);
-
-	clk->pclk = pclk_info->pclk;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	if (!clk->usage_count) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk->usage_count--;
-
-	if (clk->usage_count == 0) {
-		/*
-		 * Surely, there are no active childrens or direct users
-		 * of this clock
-		 */
-		if (clk->pclk)
-			do_clk_disable(clk->pclk);
-
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-	}
-}
-
-static int do_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EFAULT;
-
-	if (clk->usage_count == 0) {
-		if (clk->pclk) {
-			ret = do_clk_enable(clk->pclk);
-			if (ret)
-				goto err;
-		}
-		if (clk->ops && clk->ops->enable) {
-			ret = clk->ops->enable(clk);
-			if (ret) {
-				if (clk->pclk)
-					do_clk_disable(clk->pclk);
-				goto err;
-			}
-		}
-		/*
-		 * Since the clock is going to be used for the first
-		 * time please reclac
-		 */
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			if (ret)
-				goto err;
-		}
-	}
-	clk->usage_count++;
-err:
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = do_clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	do_clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- *		 This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags, rate;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	rate = clk->rate;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, found = 0, val = 0;
-	unsigned long flags;
-
-	if (!clk || !parent)
-		return -EFAULT;
-	if (clk->pclk == parent)
-		return 0;
-	if (!clk->pclk_sel)
-		return -EPERM;
-
-	/* check if requested parent is in clk parent list */
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	/* reflect parent change in hardware */
-	val = readl(clk->pclk_sel->pclk_sel_reg);
-	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
-	val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
-	writel(val, clk->pclk_sel->pclk_sel_reg);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* reflect parent change in software */
-	clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
-	propagate_rate(clk, 0);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!clk || !rate)
-		return -EFAULT;
-
-	if (clk->set_rate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		if (!ret)
-			/* if successful -> propagate */
-			propagate_rate(clk, 0);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	} else if (clk->pclk) {
-		u32 mult = clk->div_factor ? clk->div_factor : 1;
-		ret = clk_set_rate(clk->pclk, mult * rate);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
-	struct clk *clk;
-	unsigned long flags;
-
-	if (!cl || !cl->clk)
-		return;
-	clk = cl->clk;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	INIT_LIST_HEAD(&clk->children);
-	if (clk->flags & ALWAYS_ENABLED)
-		clk->ops = NULL;
-	else if (!clk->ops)
-		clk->ops = &generic_clkops;
-
-	/* root clock don't have any parents */
-	if (!clk->pclk && !clk->pclk_sel) {
-		list_add(&clk->sibling, &root_clks);
-	} else if (clk->pclk && !clk->pclk_sel) {
-		/* add clocks with only one parent to parent's children list */
-		list_add(&clk->sibling, &clk->pclk->children);
-	} else {
-		/* clocks with more than one parent */
-		struct pclk_info *pclk_info;
-
-		pclk_info = pclk_info_get(clk);
-		if (!pclk_info) {
-			pr_err("CLKDEV: invalid pclk info of clk with"
-					" %s dev_id and %s con_id\n",
-					cl->dev_id, cl->con_id);
-		} else {
-			clk->pclk = pclk_info->pclk;
-			list_add(&clk->sibling, &pclk_info->pclk->children);
-		}
-	}
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
-	list_add(&clk->node, &clocks);
-	clk->cl = cl;
-#endif
-
-	/* add clock to arm clockdev framework */
-	clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
-	struct clk *clk, *_temp;
-	int ret = 0;
-
-	list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default rate.
-			 */
-			if (ret && clk->set_rate)
-				clk->set_rate(clk, 0);
-		}
-		propagate_rate(clk, on_init);
-
-		if (!on_init)
-			continue;
-
-		/* Enable clks enabled on init, in software view */
-		if (clk->flags & ENABLED_ON_INIT)
-			do_clk_enable(clk);
-	}
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
-	unsigned long tmp = 0, prev_rate = 0;
-	int index;
-
-	if (!clk->calc_rate)
-		return -EFAULT;
-
-	if (!drate)
-		return -EINVAL;
-
-	/*
-	 * This loops ends on two conditions:
-	 * - as soon as clk is found with rate greater than requested rate.
-	 * - if all clks in rate_config are smaller than requested rate.
-	 */
-	for (index = 0; index < clk->rate_config.count; index++) {
-		prev_rate = tmp;
-		tmp = clk->calc_rate(clk, index);
-		if (drate < tmp) {
-			index--;
-			break;
-		}
-	}
-	/* return if can't find suitable clock */
-	if (index < 0) {
-		index = -EINVAL;
-		*rate = 0;
-	} else if (index == clk->rate_config.count) {
-		/* program with highest clk rate possible */
-		index = clk->rate_config.count - 1;
-		*rate = tmp;
-	} else
-		*rate = prev_rate;
-
-	return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
-	long rate = 0;
-	int index;
-
-	/*
-	 * propagate call to parent who supports calc_rate. Similar approach is
-	 * used in clk_set_rate.
-	 */
-	if (!clk->calc_rate) {
-		u32 mult;
-		if (!clk->pclk)
-			return clk->rate;
-
-		mult = clk->div_factor ? clk->div_factor : 1;
-		return clk_round_rate(clk->pclk, mult * drate) / mult;
-	}
-
-	index = round_rate_index(clk, drate, &rate);
-	if (index >= 0)
-		return rate;
-	else
-		return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	unsigned int mode;
-
-	mode = tbls[index].mode ? 256 : 1;
-	return (((2 * rate / 10000) * tbls[index].m) /
-			(mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
-	struct pll_clk_config *config = clk->private_data;
-	unsigned int num = 2, den = 0, val, mode = 0;
-
-	mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
-		config->masks->mode_mask;
-
-	val = readl(config->cfg_reg);
-	/* calculate denominator */
-	den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
-	den = 1 << den;
-	den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
-	/* calculate numerator & denominator */
-	if (!mode) {
-		/* Normal mode */
-		num *= (val >> config->masks->norm_fdbk_m_shift) &
-			config->masks->norm_fdbk_m_mask;
-	} else {
-		/* Dithered mode */
-		num *= (val >> config->masks->dith_fdbk_m_shift) &
-			config->masks->dith_fdbk_m_mask;
-		den *= 256;
-	}
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	struct pll_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->mode_reg) &
-		~(config->masks->mode_mask << config->masks->mode_shift);
-	val |= (tbls[i].mode & config->masks->mode_mask) <<
-		config->masks->mode_shift;
-	writel(val, config->mode_reg);
-
-	val = readl(config->cfg_reg) &
-		~(config->masks->div_p_mask << config->masks->div_p_shift);
-	val |= (tbls[i].p & config->masks->div_p_mask) <<
-		config->masks->div_p_shift;
-	val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
-	val |= (tbls[i].n & config->masks->div_n_mask) <<
-		config->masks->div_n_shift;
-	val &= ~(config->masks->dith_fdbk_m_mask <<
-			config->masks->dith_fdbk_m_shift);
-	if (tbls[i].mode)
-		val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
-			config->masks->dith_fdbk_m_shift;
-	else
-		val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
-			config->masks->norm_fdbk_m_shift;
-
-	writel(val, config->cfg_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
-	struct bus_clk_config *config = clk->private_data;
-	unsigned int div;
-
-	div = ((readl(config->reg) >> config->masks->shift) &
-			config->masks->mask) + 1;
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-	struct bus_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->reg) &
-		~(config->masks->mask << config->masks->shift);
-	val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
-	writel(val, config->reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2		EQ1
- * Fout2 = Fin * X/Y			EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	u8 eq = tbls[index].eq ? 1 : 2;
-
-	return (((rate/10000) * tbls[index].xscale) /
-			(tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
-	struct aux_clk_config *config = clk->private_data;
-	unsigned int num = 1, den = 1, val, eqn;
-
-	val = readl(config->synth_reg);
-
-	eqn = (val >> config->masks->eq_sel_shift) &
-		config->masks->eq_sel_mask;
-	if (eqn == config->masks->eq1_mask)
-		den *= 2;
-
-	/* calculate numerator */
-	num = (val >> config->masks->xscale_sel_shift) &
-		config->masks->xscale_sel_mask;
-
-	/* calculate denominator */
-	den *= (val >> config->masks->yscale_sel_shift) &
-		config->masks->yscale_sel_mask;
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	struct aux_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) &
-		~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
-	val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
-		config->masks->eq_sel_shift;
-	val &= ~(config->masks->xscale_sel_mask <<
-			config->masks->xscale_sel_shift);
-	val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
-		config->masks->xscale_sel_shift;
-	val &= ~(config->masks->yscale_sel_mask <<
-			config->masks->yscale_sel_shift);
-	val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
-		config->masks->yscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / ((1 << (tbls[index].nscale + 1)) *
-			(tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned int div = 1, val;
-
-	val = readl(config->synth_reg);
-	div += (val >> config->masks->mscale_sel_shift) &
-		config->masks->mscale_sel_mask;
-	div *= 1 << (((val >> config->masks->nscale_sel_shift) &
-				config->masks->nscale_sel_mask) + 1);
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
-			config->masks->mscale_sel_shift);
-	val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
-		config->masks->mscale_sel_shift;
-	val &= ~(config->masks->nscale_sel_mask <<
-			config->masks->nscale_sel_shift);
-	val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
-		config->masks->nscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
-	rate /= 1000;
-	rate <<= 12;
-	rate /= (2 * tbls[index].div);
-	rate >>= 12;
-	rate *= 1000;
-
-	return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned int div = 1;
-	unsigned long prate;
-	unsigned int val;
-
-	val = readl(config->synth_reg);
-	div = (val >> config->masks->div_factor_shift) &
-		config->masks->div_factor_mask;
-
-	if (!div)
-		return -EINVAL;
-
-	prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
-	clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
-	clk->rate *= 1000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
-			config->masks->div_factor_shift);
-	val |= (tbls[i].div & config->masks->div_factor_mask) <<
-		config->masks->div_factor_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
-	unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
-	clk->rate = clk->pclk->rate/div_factor;
-	return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
-	struct clk *pclk;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_for_each_entry(pclk, &root_clks, sibling) {
-		if (pclk->recalc) {
-			ret = pclk->recalc(pclk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default clock.
-			 */
-			if (ret && pclk->set_rate)
-				pclk->set_rate(pclk, 0);
-		}
-		propagate_rate(pclk, 1);
-		/* Enable clks enabled on init, in software view */
-		if (pclk->flags & ENABLED_ON_INIT)
-			do_clk_enable(pclk);
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
-	recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->pclk;
-	char s[255];
-	char *p = s;
-
-	if (c) {
-		if (c->cl->con_id)
-			p += sprintf(p, "%s", c->cl->con_id);
-		if (c->cl->dev_id)
-			p += sprintf(p, "%s", c->cl->dev_id);
-	}
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
-			(u32 *)&c->usage_count);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->pclk;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
-	debugfs_remove(c->dent);
-	return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062bafef12d..000000000000
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
-#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
-#define	ENABLED_ON_INIT		(1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
-	int (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
-	struct clk *pclk;
-	u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
-	struct pclk_info *pclk_info;
-	u8 pclk_count;
-	void __iomem *pclk_sel_reg;
-	unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
-	void *tbls;
-	u8 count;
-	u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
-	unsigned int usage_count;
-	unsigned int flags;
-	unsigned long rate;
-	void __iomem *en_reg;
-	u8 en_reg_bit;
-	const struct clkops *ops;
-	int (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long rate);
-	unsigned long (*calc_rate)(struct clk *, int index);
-	struct rate_config rate_config;
-	unsigned int div_factor;
-
-	struct clk *pclk;
-	struct pclk_sel *pclk_sel;
-	unsigned int pclk_sel_shift;
-
-	struct list_head children;
-	struct list_head sibling;
-	void *private_data;
-#ifdef CONFIG_DEBUG_FS
-	struct list_head node;
-	struct clk_lookup *cl;
-	struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
-	u32 mode_mask;
-	u32 mode_shift;
-
-	u32 norm_fdbk_m_mask;
-	u32 norm_fdbk_m_shift;
-	u32 dith_fdbk_m_mask;
-	u32 dith_fdbk_m_shift;
-	u32 div_p_mask;
-	u32 div_p_shift;
-	u32 div_n_mask;
-	u32 div_n_shift;
-};
-
-struct pll_clk_config {
-	void __iomem *mode_reg;
-	void __iomem *cfg_reg;
-	struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
-	u8 mode;
-	u16 m;
-	u8 n;
-	u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
-	u32 mask;
-	u32 shift;
-};
-
-struct bus_clk_config {
-	void __iomem *reg;
-	struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
-	u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
-	u32 eq_sel_mask;
-	u32 eq_sel_shift;
-	u32 eq1_mask;
-	u32 eq2_mask;
-	u32 xscale_sel_mask;
-	u32 xscale_sel_shift;
-	u32 yscale_sel_mask;
-	u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
-	void __iomem *synth_reg;
-	struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
-	u16 xscale;
-	u16 yscale;
-	u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
-	u32 mscale_sel_mask;
-	u32 mscale_sel_shift;
-	u32 nscale_sel_mask;
-	u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
-	void __iomem *synth_reg;
-	struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
-	u16 mscale;
-	u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
-	u32 div_factor_mask;
-	u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
-	void __iomem *synth_reg;
-	struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
-	u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
index 9e64824a8000..335886049c83 100644
--- a/drivers/clk/spear/Makefile
+++ b/drivers/clk/spear/Makefile
@@ -3,3 +3,6 @@
 #
 
 obj-y	+= clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx_clock.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx_clock.o
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
new file mode 100644
index 000000000000..440bb3e4c971
--- /dev/null
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -0,0 +1,612 @@
+/*
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR			(MISC_BASE + 0x008)
+#define PLL1_FRQ			(MISC_BASE + 0x00C)
+#define PLL2_CTR			(MISC_BASE + 0x014)
+#define PLL2_FRQ			(MISC_BASE + 0x018)
+#define PLL_CLK_CFG			(MISC_BASE + 0x020)
+	/* PLL_CLK_CFG register masks */
+	#define MCTR_CLK_SHIFT		28
+	#define MCTR_CLK_MASK		3
+
+#define CORE_CLK_CFG			(MISC_BASE + 0x024)
+	/* CORE CLK CFG register masks */
+	#define GEN_SYNTH2_3_CLK_SHIFT	18
+	#define GEN_SYNTH2_3_CLK_MASK	1
+
+	#define HCLK_RATIO_SHIFT	10
+	#define HCLK_RATIO_MASK		2
+	#define PCLK_RATIO_SHIFT	8
+	#define PCLK_RATIO_MASK		2
+
+#define PERIP_CLK_CFG			(MISC_BASE + 0x028)
+	/* PERIP_CLK_CFG register masks */
+	#define UART_CLK_SHIFT		4
+	#define UART_CLK_MASK		1
+	#define FIRDA_CLK_SHIFT		5
+	#define FIRDA_CLK_MASK		2
+	#define GPT0_CLK_SHIFT		8
+	#define GPT1_CLK_SHIFT		11
+	#define GPT2_CLK_SHIFT		12
+	#define GPT_CLK_MASK		1
+
+#define PERIP1_CLK_ENB			(MISC_BASE + 0x02C)
+	/* PERIP1_CLK_ENB register masks */
+	#define UART_CLK_ENB		3
+	#define SSP_CLK_ENB		5
+	#define I2C_CLK_ENB		7
+	#define JPEG_CLK_ENB		8
+	#define FIRDA_CLK_ENB		10
+	#define GPT1_CLK_ENB		11
+	#define GPT2_CLK_ENB		12
+	#define ADC_CLK_ENB		15
+	#define RTC_CLK_ENB		17
+	#define GPIO_CLK_ENB		18
+	#define DMA_CLK_ENB		19
+	#define SMI_CLK_ENB		21
+	#define GMAC_CLK_ENB		23
+	#define USBD_CLK_ENB		24
+	#define USBH_CLK_ENB		25
+	#define C3_CLK_ENB		31
+
+#define RAS_CLK_ENB			(MISC_BASE + 0x034)
+	#define RAS_AHB_CLK_ENB		0
+	#define RAS_PLL1_CLK_ENB	1
+	#define RAS_APB_CLK_ENB		2
+	#define RAS_32K_CLK_ENB		3
+	#define RAS_24M_CLK_ENB		4
+	#define RAS_48M_CLK_ENB		5
+	#define RAS_PLL2_CLK_ENB	7
+	#define RAS_SYNT0_CLK_ENB	8
+	#define RAS_SYNT1_CLK_ENB	9
+	#define RAS_SYNT2_CLK_ENB	10
+	#define RAS_SYNT3_CLK_ENB	11
+
+#define PRSC0_CLK_CFG			(MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG			(MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG			(MISC_BASE + 0x04C)
+#define AMEM_CLK_CFG			(MISC_BASE + 0x050)
+	#define AMEM_CLK_ENB		0
+
+#define CLCD_CLK_SYNT			(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT			(MISC_BASE + 0x060)
+#define UART_CLK_SYNT			(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT			(MISC_BASE + 0x068)
+#define GEN0_CLK_SYNT			(MISC_BASE + 0x06C)
+#define GEN1_CLK_SYNT			(MISC_BASE + 0x070)
+#define GEN2_CLK_SYNT			(MISC_BASE + 0x074)
+#define GEN3_CLK_SYNT			(MISC_BASE + 0x078)
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	{.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */
+	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
+	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+	/* For pll1 = 332 MHz */
+	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+	{.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* clock parents */
+static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
+static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+	"pll2_clk", };
+
+#ifdef CONFIG_MACH_SPEAR300
+static void __init spear300_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+			1, 1);
+	clk_register_clkdev(clk, NULL, "60000000.clcd");
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "94000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+	clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a9000000.gpio");
+
+	clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a0000000.kbd");
+}
+#endif
+
+/* array of all spear 310 clock lookups */
+#ifdef CONFIG_MACH_SPEAR310
+static void __init spear310_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "emi", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "44000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "tdm");
+
+	clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2000000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2080000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2100000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2180000.serial");
+
+	clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "b2200000.serial");
+}
+#endif
+
+/* array of all spear 320 clock lookups */
+#ifdef CONFIG_MACH_SPEAR320
+	#define SMII_PCLK_SHIFT				18
+	#define SMII_PCLK_MASK				2
+	#define SMII_PCLK_VAL_PAD			0x0
+	#define SMII_PCLK_VAL_PLL2			0x1
+	#define SMII_PCLK_VAL_SYNTH0			0x2
+	#define SDHCI_PCLK_SHIFT			15
+	#define SDHCI_PCLK_MASK				1
+	#define SDHCI_PCLK_VAL_48M			0x0
+	#define SDHCI_PCLK_VAL_SYNTH3			0x1
+	#define I2S_REF_PCLK_SHIFT			8
+	#define I2S_REF_PCLK_MASK			1
+	#define I2S_REF_PCLK_SYNTH_VAL			0x1
+	#define I2S_REF_PCLK_PLL2_VAL			0x0
+	#define UART1_PCLK_SHIFT			6
+	#define UART1_PCLK_MASK				1
+	#define SPEAR320_UARTX_PCLK_VAL_SYNTH1		0x0
+	#define SPEAR320_UARTX_PCLK_VAL_APB		0x1
+
+static const char *i2s_ref_parents[] = { "ras_pll2_clk",
+	"ras_gen2_synth_gate_clk", };
+static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
+	"ras_gen3_synth_gate_clk",
+};
+static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
+	"ras_gen0_synth_gate_clk", };
+static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
+};
+
+static void __init spear320_clk_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL,
+			CLK_IS_ROOT, 125000000);
+	clk_register_clkdev(clk, "smii_125m_pad", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+			1, 1);
+	clk_register_clkdev(clk, NULL, "90000000.clcd");
+
+	clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "emi", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "4c000000.flash");
+
+	clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a7000000.i2c");
+
+	clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "pwm", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a5000000.spi");
+
+	clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "a6000000.spi");
+
+	clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+	clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+	clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "i2s");
+
+	clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
+			ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
+			I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+			4);
+	clk_register_clkdev(clk, "i2s_sclk", NULL);
+
+	clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9300000.serial");
+
+	clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
+			ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
+			SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+	clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
+			ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG,
+			SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "smii_pclk");
+
+	clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1);
+	clk_register_clkdev(clk, NULL, "smii");
+
+	clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
+			UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "a3000000.serial");
+
+	clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a4000000.serial");
+
+	clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9100000.serial");
+
+	clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "a9200000.serial");
+
+	clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "60000000.serial");
+
+	clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
+			ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+			SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, NULL, "60100000.serial");
+}
+#endif
+
+void __init spear3xx_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+			24000000);
+	clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+			PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+	/* clock derived from 24 MHz osc clk */
+	clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "fc880000.wdt");
+
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL,
+			"osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+			"osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+			HCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+			ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
+			UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
+			PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+	clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+			"pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "firda_synth_clk", NULL);
+	clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+			ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+			FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+			PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "firda");
+
+	/* gpt clocks */
+	clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
+			ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
+			GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+			ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
+			GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+			ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+			GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	/* general synths clocks */
+	clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
+			"pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen0_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+
+	clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
+			"pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen1_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+			ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
+			GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+
+	clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
+			"gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen2_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+
+	clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
+			"gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "gen3_synth_clk", NULL);
+	clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+
+	/* clock derived from pll3 clk */
+	clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "usbh_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "designware_udc");
+
+	/* clock derived from ahb clk */
+	clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+			1);
+	clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+			ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+			MCTR_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+			PCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG,
+			AMEM_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "amem_clk", NULL);
+
+	clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			C3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "c3_clk");
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			DMA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			GMAC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "e0800000.eth");
+
+	clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			I2C_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0180000.i2c");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			JPEG_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "jpeg");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			SMI_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "adc");
+
+	clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0100000.spi");
+
+	/* RAS clk enable */
+	clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB,
+			RAS_AHB_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
+			RAS_APB_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
+			RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_32k_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0,
+			RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_24m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0,
+			RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll1_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+			RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+			RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
+			"gen0_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
+			"gen1_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
+			"gen2_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+
+	clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
+			"gen3_synth_gate_clk", 0, RAS_CLK_ENB,
+			RAS_SYNT3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+
+	if (of_machine_is_compatible("st,spear300"))
+		spear300_clk_init();
+	else if (of_machine_is_compatible("st,spear310"))
+		spear310_clk_init();
+	else if (of_machine_is_compatible("st,spear320"))
+		spear320_clk_init();
+}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
new file mode 100644
index 000000000000..f9a20b382304
--- /dev/null
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -0,0 +1,342 @@
+/*
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR			(MISC_BASE + 0x008)
+#define PLL1_FRQ			(MISC_BASE + 0x00C)
+#define PLL2_CTR			(MISC_BASE + 0x014)
+#define PLL2_FRQ			(MISC_BASE + 0x018)
+#define PLL_CLK_CFG			(MISC_BASE + 0x020)
+	/* PLL_CLK_CFG register masks */
+	#define MCTR_CLK_SHIFT		28
+	#define MCTR_CLK_MASK		3
+
+#define CORE_CLK_CFG			(MISC_BASE + 0x024)
+	/* CORE CLK CFG register masks */
+	#define HCLK_RATIO_SHIFT	10
+	#define HCLK_RATIO_MASK		2
+	#define PCLK_RATIO_SHIFT	8
+	#define PCLK_RATIO_MASK		2
+
+#define PERIP_CLK_CFG			(MISC_BASE + 0x028)
+	/* PERIP_CLK_CFG register masks */
+	#define CLCD_CLK_SHIFT		2
+	#define CLCD_CLK_MASK		2
+	#define UART_CLK_SHIFT		4
+	#define UART_CLK_MASK		1
+	#define FIRDA_CLK_SHIFT		5
+	#define FIRDA_CLK_MASK		2
+	#define GPT0_CLK_SHIFT		8
+	#define GPT1_CLK_SHIFT		10
+	#define GPT2_CLK_SHIFT		11
+	#define GPT3_CLK_SHIFT		12
+	#define GPT_CLK_MASK		1
+
+#define PERIP1_CLK_ENB			(MISC_BASE + 0x02C)
+	/* PERIP1_CLK_ENB register masks */
+	#define UART0_CLK_ENB		3
+	#define UART1_CLK_ENB		4
+	#define SSP0_CLK_ENB		5
+	#define SSP1_CLK_ENB		6
+	#define I2C_CLK_ENB		7
+	#define JPEG_CLK_ENB		8
+	#define FSMC_CLK_ENB		9
+	#define FIRDA_CLK_ENB		10
+	#define GPT2_CLK_ENB		11
+	#define GPT3_CLK_ENB		12
+	#define GPIO2_CLK_ENB		13
+	#define SSP2_CLK_ENB		14
+	#define ADC_CLK_ENB		15
+	#define GPT1_CLK_ENB		11
+	#define RTC_CLK_ENB		17
+	#define GPIO1_CLK_ENB		18
+	#define DMA_CLK_ENB		19
+	#define SMI_CLK_ENB		21
+	#define CLCD_CLK_ENB		22
+	#define GMAC_CLK_ENB		23
+	#define USBD_CLK_ENB		24
+	#define USBH0_CLK_ENB		25
+	#define USBH1_CLK_ENB		26
+
+#define PRSC0_CLK_CFG			(MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG			(MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG			(MISC_BASE + 0x04C)
+
+#define CLCD_CLK_SYNT			(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT			(MISC_BASE + 0x060)
+#define UART_CLK_SYNT			(MISC_BASE + 0x064)
+
+/* vco rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+	{.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */
+	{.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+	/* For PLL1 = 332 MHz */
+	{.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+	{.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+	"pll2_clk", };
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+	/* For pll1 = 332 MHz */
+	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+	{.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+void __init spear6xx_clk_init(void)
+{
+	struct clk *clk, *clk1;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+			32000);
+	clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+	clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT,
+			30000000);
+	clk_register_clkdev(clk, "osc_30m_clk", NULL);
+
+	/* clock derived from 32 KHz osc clk */
+	clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0,
+			PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "rtc-spear");
+
+	/* clock derived from 30 MHz osc clk */
+	clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+			48000000);
+	clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+	clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
+			0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+			&_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco1_clk", NULL);
+	clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+	clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+			"osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+			ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+	clk_register_clkdev(clk, "vco2_clk", NULL);
+	clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+	clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1,
+			1);
+	clk_register_clkdev(clk, NULL, "wdt");
+
+	/* clock derived from pll1 clk */
+	clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+	clk_register_clkdev(clk, "cpu_clk", NULL);
+
+	clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+			HCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "ahb_clk", NULL);
+
+	clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+			"pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "uart_synth_clk", NULL);
+	clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+			ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
+			UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "uart_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
+			PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+	clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
+			PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0080000.serial");
+
+	clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+			"pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "firda_synth_clk", NULL);
+	clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+			ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+			FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+			PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "firda");
+
+	clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
+			"pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
+			ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+	clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+	clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+
+	clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+			ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
+			CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+			PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "clcd");
+
+	/* gpt clocks */
+	clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+			ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+			GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt0");
+
+	clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+			ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+			GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt1");
+
+	clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+			ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+			GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt2");
+
+	clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+			gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+	clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+
+	clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+			ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
+			GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+
+	clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+			PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gpt3");
+
+	/* clock derived from pll3 clk */
+	clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "usbh.0_clk");
+
+	clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "usbh.1_clk");
+
+	clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+			PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "designware_udc");
+
+	/* clock derived from ahb clk */
+	clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+			1);
+	clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+	clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+			ARRAY_SIZE(ddr_parents),
+			0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
+			&_lock);
+	clk_register_clkdev(clk, "ddr_clk", NULL);
+
+	clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+			CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+			PCLK_RATIO_MASK, 0, &_lock);
+	clk_register_clkdev(clk, "apb_clk", NULL);
+
+	clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			DMA_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+	clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			FSMC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d1800000.flash");
+
+	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			GMAC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "gmac");
+
+	clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			I2C_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d0200000.i2c");
+
+	clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			JPEG_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "jpeg");
+
+	clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+			SMI_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+	/* clock derived from apb clk */
+	clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			ADC_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "adc");
+
+	clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1);
+	clk_register_clkdev(clk, NULL, "f0100000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+	clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			GPIO2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "d8100000.gpio");
+
+	clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP0_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.0");
+
+	clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP1_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.1");
+
+	clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+			SSP2_CLK_ENB, 0, &_lock);
+	clk_register_clkdev(clk, NULL, "ssp-pl022.2");
+}
-- 
cgit v1.2.3


From 1df5c939f6d9dff7dfbe108d93133b9636baa607 Mon Sep 17 00:00:00 2001
From: Mark Brown
Date: Wed, 18 Apr 2012 09:07:12 +0100
Subject: clk: Provide dummy clk_unregister()

While there's no actual implementation behind it having the call to use
in drivers makes them feel neater from a driver author point of view. An
actual implementation can wait for someone who needs to use the function
in a real system.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[mturquette@linaro.org: void return type instead of int -EINVAL]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c            | 9 +++++++++
 include/linux/clk-provider.h | 2 ++
 2 files changed, 11 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index e5d5dc13bcfd..a7e5dd59e19d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1420,6 +1420,15 @@ fail_out:
 }
 EXPORT_SYMBOL_GPL(clk_register);
 
+/**
+ * clk_unregister - unregister a currently registered clock
+ * @clk: clock to unregister
+ *
+ * Currently unimplemented.
+ */
+void clk_unregister(struct clk *clk) {}
+EXPORT_SYMBOL_GPL(clk_unregister);
+
 /***        clk rate change notifiers        ***/
 
 /**
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c1c23b9ec368..4a0b483986c3 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -312,6 +312,8 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
  */
 struct clk *clk_register(struct device *dev, struct clk_hw *hw);
 
+void clk_unregister(struct clk *clk);
+
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);
 struct clk_hw *__clk_get_hw(struct clk *clk);
-- 
cgit v1.2.3


From 7e0fa1b5fa91d9aa456d102c273b2cf0f2e95d39 Mon Sep 17 00:00:00 2001
From: Saravana Kannan
Date: Tue, 15 May 2012 13:43:42 -0700
Subject: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().

The clk_set_rate() code shouldn't check the clock's enable count when
validating CLK_SET_RATE_GATE flag since the enable count could change after
the validation. Similar to clk_set_parent(), it should instead check the
prepare count. The prepare count should go to zero only when the end user
expects the clock to not be enabled in the future. Since the code already
grabs the prepare count before validation, it's not possible for prepare
count to change after validation and by association not possible for a well
behaving end user to enable the clock while the set rate is in progress.

Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index a7e5dd59e19d..687b00d67c8a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -903,7 +903,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (rate == clk->rate)
 		goto out;
 
-	if ((clk->flags & CLK_SET_RATE_GATE) && __clk_is_enabled(clk)) {
+	if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) {
 		ret = -EBUSY;
 		goto out;
 	}
-- 
cgit v1.2.3