From 3973c526ae9cda5959bf6ef8ed936c46845eb774 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 14 Nov 2014 17:40:13 +0200 Subject: can: c_can: Disable pins when CAN interface is down DRA7 CAN IP suffers from a problem which causes it to be prevented from fully turning OFF (i.e. stuck in transition) if the module was disabled while there was traffic on the CAN_RX line. To work around this issue we select the SLEEP pin state by default on probe and use the DEFAULT pin state on CAN up and back to the SLEEP pin state on CAN down. Signed-off-by: Roger Quadros Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 8e78bb48f5a4..f94a9fa60488 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -603,6 +604,8 @@ static int c_can_start(struct net_device *dev) priv->can.state = CAN_STATE_ERROR_ACTIVE; + /* activate pins */ + pinctrl_pm_select_default_state(dev->dev.parent); return 0; } @@ -611,6 +614,9 @@ static void c_can_stop(struct net_device *dev) struct c_can_priv *priv = netdev_priv(dev); c_can_irq_control(priv, false); + + /* deactivate pins */ + pinctrl_pm_select_sleep_state(dev->dev.parent); priv->can.state = CAN_STATE_STOPPED; } @@ -1244,6 +1250,13 @@ int register_c_can_dev(struct net_device *dev) struct c_can_priv *priv = netdev_priv(dev); int err; + /* Deactivate pins to prevent DRA7 DCAN IP from being + * stuck in transition when module is disabled. + * Pins are activated in c_can_start() and deactivated + * in c_can_stop() + */ + pinctrl_pm_select_sleep_state(dev->dev.parent); + c_can_pm_runtime_enable(priv); dev->flags |= IFF_ECHO; /* we support local echo */ -- cgit v1.2.3