From a1a8e1dc111d6f05e7164e851e58219d428359e1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 16 Jul 2013 15:28:00 +0100 Subject: iio:trigger: Fix use_count race condition When using more than one trigger consumer it can happen that multiple threads perform a read-modify-update cycle on 'use_count' concurrently. This can cause updates to be lost and use_count can get stuck at non-zero value, in which case the IIO core assumes that at least one thread is still running and will wait for it to finish before running any trigger handlers again. This effectively renders the trigger disabled and a reboot is necessary before it can be used again. To fix this make use_count an atomic variable. Also set it to the number of consumers before starting the first consumer, otherwise it might happen that use_count drops to 0 even though not all consumers have been run yet. Signed-off-by: Lars-Peter Clausen Tested-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-trigger.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index ea8a4146620d..0dd9bb873130 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -127,12 +127,17 @@ static struct iio_trigger *iio_trigger_find_by_name(const char *name, void iio_trigger_poll(struct iio_trigger *trig, s64 time) { int i; - if (!trig->use_count) - for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) - if (trig->subirqs[i].enabled) { - trig->use_count++; + + if (!atomic_read(&trig->use_count)) { + atomic_set(&trig->use_count, CONFIG_IIO_CONSUMERS_PER_TRIGGER); + + for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) { + if (trig->subirqs[i].enabled) generic_handle_irq(trig->subirq_base + i); - } + else + iio_trigger_notify_done(trig); + } + } } EXPORT_SYMBOL(iio_trigger_poll); @@ -146,19 +151,24 @@ EXPORT_SYMBOL(iio_trigger_generic_data_rdy_poll); void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time) { int i; - if (!trig->use_count) - for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) - if (trig->subirqs[i].enabled) { - trig->use_count++; + + if (!atomic_read(&trig->use_count)) { + atomic_set(&trig->use_count, CONFIG_IIO_CONSUMERS_PER_TRIGGER); + + for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) { + if (trig->subirqs[i].enabled) handle_nested_irq(trig->subirq_base + i); - } + else + iio_trigger_notify_done(trig); + } + } } EXPORT_SYMBOL(iio_trigger_poll_chained); void iio_trigger_notify_done(struct iio_trigger *trig) { - trig->use_count--; - if (trig->use_count == 0 && trig->ops && trig->ops->try_reenable) + if (atomic_dec_and_test(&trig->use_count) && trig->ops && + trig->ops->try_reenable) if (trig->ops->try_reenable(trig)) /* Missed an interrupt so launch new poll now */ iio_trigger_poll(trig, 0); -- cgit v1.2.3 From b1451e546899bc8f450773b2af02e0cd000cf1fa Mon Sep 17 00:00:00 2001 From: Patil, Rachna Date: Sat, 20 Jul 2013 17:27:00 +0100 Subject: iio: ti_am335x_adc: Fix wrong samples received on 1st read Previously we tried to read data form ADC even before ADC sequencer finished sampling. This led to wrong samples. We now wait on ADC status register idle bit to be set. Signed-off-by: Patil, Rachna Signed-off-by: Zubair Lutfullah Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 30 ++++++++++++++++++++++-------- include/linux/mfd/ti_am335x_tscadc.h | 16 ++++++++++++++++ 2 files changed, 38 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 0ad208a69c29..3ceac3e91dde 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -60,7 +60,6 @@ static void tiadc_step_config(struct tiadc_device *adc_dev) { unsigned int stepconfig; int i, steps; - u32 step_en; /* * There are 16 configurable steps and 8 analog input @@ -86,8 +85,7 @@ static void tiadc_step_config(struct tiadc_device *adc_dev) adc_dev->channel_step[i] = steps; steps++; } - step_en = get_adc_step_mask(adc_dev); - am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en); + } static const char * const chan_name_ain[] = { @@ -142,10 +140,22 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct tiadc_device *adc_dev = iio_priv(indio_dev); - int i; - unsigned int fifo1count, read; + int i, map_val; + unsigned int fifo1count, read, stepid; u32 step = UINT_MAX; bool found = false; + u32 step_en; + unsigned long timeout = jiffies + usecs_to_jiffies + (IDLE_TIMEOUT * adc_dev->channels); + step_en = get_adc_step_mask(adc_dev); + am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en); + + /* Wait for ADC sequencer to complete sampling */ + while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) { + if (time_after(jiffies, timeout)) + return -EAGAIN; + } + map_val = chan->channel + TOTAL_CHANNELS; /* * When the sub-system is first enabled, @@ -170,12 +180,16 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); for (i = 0; i < fifo1count; i++) { read = tiadc_readl(adc_dev, REG_FIFO1); - if (read >> 16 == step) { - *val = read & 0xfff; + stepid = read & FIFOREAD_CHNLID_MASK; + stepid = stepid >> 0x10; + + if (stepid == map_val) { + read = read & FIFOREAD_DATA_MASK; found = true; + *val = read; } } - am335x_tsc_se_update(adc_dev->mfd_tscadc); + if (found == false) return -EBUSY; return IIO_VAL_INT; diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 8d73fe29796a..db1791bb997a 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -113,11 +113,27 @@ #define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) #define CNTRLREG_TSCENB BIT(7) +/* FIFO READ Register */ +#define FIFOREAD_DATA_MASK (0xfff << 0) +#define FIFOREAD_CHNLID_MASK (0xf << 16) + +/* Sequencer Status */ +#define SEQ_STATUS BIT(5) + #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 #define TOTAL_STEPS 16 #define TOTAL_CHANNELS 8 +/* +* ADC runs at 3MHz, and it takes +* 15 cycles to latch one data output. +* Hence the idle time for ADC to +* process one sample data would be +* around 5 micro seconds. +*/ +#define IDLE_TIMEOUT 5 /* microsec */ + #define TSCADC_CELLS 2 struct ti_tscadc_dev { -- cgit v1.2.3 From 68c034fefe20eaf7d5569aae84584b07987ce50a Mon Sep 17 00:00:00 2001 From: Yoshihiro YUNOMAE Date: Tue, 23 Jul 2013 11:30:49 +0930 Subject: virtio/console: Quit from splice_write if pipe->nrbufs is 0 Quit from splice_write if pipe->nrbufs is 0 for avoiding oops in virtio-serial. When an application was doing splice from a kernel buffer to virtio-serial on a guest, the application received signal(SIGINT). This situation will normally happen, but the kernel executed a kernel panic by oops as follows: BUG: unable to handle kernel paging request at ffff882071c8ef28 IP: [] sg_init_table+0x2f/0x50 PGD 1fac067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: lockd sunrpc bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd microcode virtio_balloon virtio_net pcspkr soundcore i2c_piix4 i2c_core uinput floppy CPU: 1 PID: 908 Comm: trace-cmd Not tainted 3.10.0+ #49 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071c64650 ti: ffff88007bf24000 task.ti: ffff88007bf24000 RIP: 0010:[] [] sg_init_table+0x2f/0x50 RSP: 0018:ffff88007bf25dd8 EFLAGS: 00010286 RAX: 0000001fffffffe0 RBX: ffff882071c8ef28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880071c8ef48 RBP: ffff88007bf25de8 R08: ffff88007fd15d40 R09: ffff880071c8ef48 R10: ffffea0001c71040 R11: ffffffff8139c555 R12: 0000000000000000 R13: ffff88007506a3c0 R14: ffff88007c862500 R15: ffff880071c8ef00 FS: 00007f0a3646c740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882071c8ef28 CR3: 000000007acbb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880071c8ef48 ffff88007bf25e20 ffff88007bf25e88 ffffffff8139d6fa ffff88007bf25e28 ffffffff8127a3f4 0000000000000000 0000000000000000 ffff880071c8ef48 0000100000000000 0000000000000003 ffff88007bf25e08 Call Trace: [] port_fops_splice_write+0xaa/0x130 [] ? selinux_file_permission+0xc4/0x120 [] ? wait_port_writable+0x1b0/0x1b0 [] do_splice_from+0xa0/0x110 [] SyS_splice+0x5ff/0x6b0 [] system_call_fastpath+0x16/0x1b Code: c1 e2 05 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 31 f6 48 89 5d f0 48 89 fb e8 8d ce ff ff 41 8d 44 24 ff 48 c1 e0 05 48 01 c3 <48> 8b 03 48 83 e0 fe 48 83 c8 02 48 89 03 48 8b 5d f0 4c 8b 65 RIP [] sg_init_table+0x2f/0x50 RSP CR2: ffff882071c8ef28 ---[ end trace 86323505eb42ea8f ]--- It seems to induce pagefault in sg_init_tabel() when pipe->nrbufs is equal to zero. This may happen in a following situation: (1) The application normally does splice(read) from a kernel buffer, then does splice(write) to virtio-serial. (2) The application receives SIGINT when is doing splice(read), so splice(read) is failed by EINTR. However, the application does not finish the operation. (3) The application tries to do splice(write) without pipe->nrbufs. (4) The virtio-console driver tries to touch scatterlist structure sgl in sg_init_table(), but the region is out of bound. To avoid the case, a kernel should check whether pipe->nrbufs is empty or not when splice_write is executed in the virtio-console driver. V3: Add Reviewed-by lines and stable@ line in sign-off area. Signed-off-by: Yoshihiro YUNOMAE Reviewed-by: Amit Shah Reviewed-by: Masami Hiramatsu Cc: Amit Shah Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 1b456fe9b87a..8722656cdebf 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -932,6 +932,13 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, if (is_rproc_serial(port->out_vq->vdev)) return -EINVAL; + /* + * pipe->nrbufs == 0 means there are no data to transfer, + * so this returns just 0 for no data. + */ + if (!pipe->nrbufs) + return 0; + ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK); if (ret < 0) return ret; -- cgit v1.2.3 From 2b4fbf029dff5a28d9bf646346dea891ec43398a Mon Sep 17 00:00:00 2001 From: Yoshihiro YUNOMAE Date: Tue, 23 Jul 2013 11:30:49 +0930 Subject: virtio/console: Add pipe_lock/unlock for splice_write Add pipe_lock/unlock for splice_write to avoid oops by following competition: (1) An application gets fds of a trace buffer, virtio-serial, pipe. (2) The application does fork() (3) The processes execute splice_read(trace buffer) and splice_write(virtio-serial) via same pipe. get fds of a trace buffer, virtio-serial, pipe | fork()----------create--------+ | | splice(read) | ---+ splice(write) | +-- no competition | splice(read) | | splice(write) ---+ | | splice(read) | splice(write) splice(read) ------ competition | splice(write) Two processes share a pipe_inode_info structure. If the child execute splice(read) when the parent tries to execute splice(write), the structure can be broken. Existing virtio-serial driver does not get lock for the structure in splice_write, so this competition will induce oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [] splice_from_pipe_feed+0x6f/0x130 PGD 7223e067 PUD 72391067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: lockd bnep bluetooth rfkill sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr virtio_net virtio_balloon i2c_piix4 i2c_core microcode uinput floppy CPU: 0 PID: 1072 Comm: compete-test Not tainted 3.10.0ws+ #55 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071b98000 ti: ffff88007b55e000 task.ti: ffff88007b55e000 RIP: 0010:[] [] splice_from_pipe_feed+0x6f/0x130 RSP: 0018:ffff88007b55fd78 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff88007b55fe20 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88007a95ba30 RDI: ffff880036f9e6c0 RBP: ffff88007b55fda8 R08: 00000000000006ec R09: ffff880077626708 R10: 0000000000000003 R11: ffffffff8139ca59 R12: ffff88007a95ba30 R13: 0000000000000000 R14: ffffffff8139dd00 R15: ffff880036f9e6c0 FS: 00007f2e2e3a0740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000071bd1000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8139ca59 ffff88007b55fe20 ffff880036f9e6c0 ffffffff8139dd00 ffff8800776266c0 ffff880077626708 ffff88007b55fde8 ffffffff811a6e8e ffff88007b55fde8 ffffffff8139ca59 ffff880036f9e6c0 ffff88007b55fe20 Call Trace: [] ? alloc_buf.isra.13+0x39/0xb0 [] ? virtcons_restore+0x100/0x100 [] __splice_from_pipe+0x7e/0x90 [] ? alloc_buf.isra.13+0x39/0xb0 [] port_fops_splice_write+0xe9/0x140 [] ? selinux_file_permission+0xc4/0x120 [] ? wait_port_writable+0x1b0/0x1b0 [] do_splice_from+0xa0/0x110 [] SyS_splice+0x5ff/0x6b0 [] tracesys+0xdd/0xe2 Code: 49 8b 87 80 00 00 00 4c 8d 24 d0 8b 53 04 41 8b 44 24 0c 4d 8b 6c 24 10 39 d0 89 03 76 02 89 13 49 8b 44 24 10 4c 89 e6 4c 89 ff 50 18 85 c0 0f 85 aa 00 00 00 48 89 da 4c 89 e6 4c 89 ff 41 RIP [] splice_from_pipe_feed+0x6f/0x130 RSP CR2: 0000000000000018 ---[ end trace 24572beb7764de59 ]--- V2: Fix a locking problem for error V3: Add Reviewed-by lines and stable@ line in sign-off area Signed-off-by: Yoshihiro YUNOMAE Reviewed-by: Amit Shah Reviewed-by: Masami Hiramatsu Cc: Amit Shah Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 8722656cdebf..8a15af3e1a9d 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -936,16 +936,21 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, * pipe->nrbufs == 0 means there are no data to transfer, * so this returns just 0 for no data. */ - if (!pipe->nrbufs) - return 0; + pipe_lock(pipe); + if (!pipe->nrbufs) { + ret = 0; + goto error_out; + } ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK); if (ret < 0) - return ret; + goto error_out; buf = alloc_buf(port->out_vq, 0, pipe->nrbufs); - if (!buf) - return -ENOMEM; + if (!buf) { + ret = -ENOMEM; + goto error_out; + } sgl.n = 0; sgl.len = 0; @@ -953,12 +958,17 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, sgl.sg = buf->sg; sg_init_table(sgl.sg, sgl.size); ret = __splice_from_pipe(pipe, &sd, pipe_to_sg); + pipe_unlock(pipe); if (likely(ret > 0)) ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true); if (unlikely(ret <= 0)) free_buf(buf, true); return ret; + +error_out: + pipe_unlock(pipe); + return ret; } static unsigned int port_fops_poll(struct file *filp, poll_table *wait) -- cgit v1.2.3 From b2634562ad90be16441cff1127136457ea619466 Mon Sep 17 00:00:00 2001 From: John Sheu Date: Thu, 30 May 2013 16:42:08 -0300 Subject: [media] s5p-mfc: Fix input/output format reporting The video encode/decode paths have duplicated logic between VIDIOC_TRY_FMT and VIDIOC_S_FMT that should be de-duped. Also, video decode reports V4L2_PIX_FMT_NV12MT_16X16 output format, regardless of what the actual output has been set at. Fix this. Signed-off-by: John Sheu Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 79 +++++++++++----------------- drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 46 ++++++---------- 2 files changed, 48 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 00b07032f4f0..06091c01176a 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -344,7 +344,7 @@ static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) pix_mp->num_planes = 2; /* Set pixelformat to the format in which MFC outputs the decoded frame */ - pix_mp->pixelformat = V4L2_PIX_FMT_NV12MT; + pix_mp->pixelformat = ctx->dst_fmt->fourcc; pix_mp->plane_fmt[0].bytesperline = ctx->buf_width; pix_mp->plane_fmt[0].sizeimage = ctx->luma_size; pix_mp->plane_fmt[1].bytesperline = ctx->buf_width; @@ -382,10 +382,16 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) mfc_err("Unsupported format for source.\n"); return -EINVAL; } - if (!IS_MFCV6(dev) && (fmt->fourcc == V4L2_PIX_FMT_VP8)) { - mfc_err("Not supported format.\n"); + if (fmt->codec_mode == S5P_FIMV_CODEC_NONE) { + mfc_err("Unknown codec\n"); return -EINVAL; } + if (!IS_MFCV6(dev)) { + if (fmt->fourcc == V4L2_PIX_FMT_VP8) { + mfc_err("Not supported format.\n"); + return -EINVAL; + } + } } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { fmt = find_format(f, MFC_FMT_RAW); if (!fmt) { @@ -411,7 +417,6 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) struct s5p_mfc_dev *dev = video_drvdata(file); struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); int ret = 0; - struct s5p_mfc_fmt *fmt; struct v4l2_pix_format_mplane *pix_mp; mfc_debug_enter(); @@ -425,54 +430,32 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) goto out; } if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { - fmt = find_format(f, MFC_FMT_RAW); - if (!fmt) { - mfc_err("Unsupported format for source.\n"); - return -EINVAL; - } - if (!IS_MFCV6(dev) && (fmt->fourcc != V4L2_PIX_FMT_NV12MT)) { - mfc_err("Not supported format.\n"); - return -EINVAL; - } else if (IS_MFCV6(dev) && - (fmt->fourcc == V4L2_PIX_FMT_NV12MT)) { - mfc_err("Not supported format.\n"); - return -EINVAL; - } - ctx->dst_fmt = fmt; - mfc_debug_leave(); - return ret; - } else if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { - mfc_err("Wrong type error for S_FMT : %d", f->type); - return -EINVAL; - } - fmt = find_format(f, MFC_FMT_DEC); - if (!fmt || fmt->codec_mode == S5P_MFC_CODEC_NONE) { - mfc_err("Unknown codec\n"); - ret = -EINVAL; + /* dst_fmt is validated by call to vidioc_try_fmt */ + ctx->dst_fmt = find_format(f, MFC_FMT_RAW); + ret = 0; goto out; - } - if (fmt->type != MFC_FMT_DEC) { - mfc_err("Wrong format selected, you should choose " - "format for decoding\n"); + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* src_fmt is validated by call to vidioc_try_fmt */ + ctx->src_fmt = find_format(f, MFC_FMT_DEC); + ctx->codec_mode = ctx->src_fmt->codec_mode; + mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode); + pix_mp->height = 0; + pix_mp->width = 0; + if (pix_mp->plane_fmt[0].sizeimage) + ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage; + else + pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size = + DEF_CPB_SIZE; + pix_mp->plane_fmt[0].bytesperline = 0; + ctx->state = MFCINST_INIT; + ret = 0; + goto out; + } else { + mfc_err("Wrong type error for S_FMT : %d", f->type); ret = -EINVAL; goto out; } - if (!IS_MFCV6(dev) && (fmt->fourcc == V4L2_PIX_FMT_VP8)) { - mfc_err("Not supported format.\n"); - return -EINVAL; - } - ctx->src_fmt = fmt; - ctx->codec_mode = fmt->codec_mode; - mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode); - pix_mp->height = 0; - pix_mp->width = 0; - if (pix_mp->plane_fmt[0].sizeimage) - ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage; - else - pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size = - DEF_CPB_SIZE; - pix_mp->plane_fmt[0].bytesperline = 0; - ctx->state = MFCINST_INIT; + out: mfc_debug_leave(); return ret; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index 2549967b2f85..59e56f4c8ce3 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -906,6 +906,7 @@ static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) { + struct s5p_mfc_dev *dev = video_drvdata(file); struct s5p_mfc_fmt *fmt; struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; @@ -930,6 +931,18 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) return -EINVAL; } + if (!IS_MFCV6(dev)) { + if (fmt->fourcc == V4L2_PIX_FMT_NV12MT_16X16) { + mfc_err("Not supported format.\n"); + return -EINVAL; + } + } else if (IS_MFCV6(dev)) { + if (fmt->fourcc == V4L2_PIX_FMT_NV12MT) { + mfc_err("Not supported format.\n"); + return -EINVAL; + } + } + if (fmt->num_planes != pix_fmt_mp->num_planes) { mfc_err("failed to try output format\n"); return -EINVAL; @@ -947,7 +960,6 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) { struct s5p_mfc_dev *dev = video_drvdata(file); struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); - struct s5p_mfc_fmt *fmt; struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; int ret = 0; @@ -960,13 +972,9 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) goto out; } if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { - fmt = find_format(f, MFC_FMT_ENC); - if (!fmt) { - mfc_err("failed to set capture format\n"); - return -EINVAL; - } + /* dst_fmt is validated by call to vidioc_try_fmt */ + ctx->dst_fmt = find_format(f, MFC_FMT_ENC); ctx->state = MFCINST_INIT; - ctx->dst_fmt = fmt; ctx->codec_mode = ctx->dst_fmt->codec_mode; ctx->enc_dst_buf_size = pix_fmt_mp->plane_fmt[0].sizeimage; pix_fmt_mp->plane_fmt[0].bytesperline = 0; @@ -987,28 +995,8 @@ static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) } mfc_debug(2, "Got instance number: %d\n", ctx->inst_no); } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { - fmt = find_format(f, MFC_FMT_RAW); - if (!fmt) { - mfc_err("failed to set output format\n"); - return -EINVAL; - } - - if (!IS_MFCV6(dev) && - (fmt->fourcc == V4L2_PIX_FMT_NV12MT_16X16)) { - mfc_err("Not supported format.\n"); - return -EINVAL; - } else if (IS_MFCV6(dev) && - (fmt->fourcc == V4L2_PIX_FMT_NV12MT)) { - mfc_err("Not supported format.\n"); - return -EINVAL; - } - - if (fmt->num_planes != pix_fmt_mp->num_planes) { - mfc_err("failed to set output format\n"); - ret = -EINVAL; - goto out; - } - ctx->src_fmt = fmt; + /* src_fmt is validated by call to vidioc_try_fmt */ + ctx->src_fmt = find_format(f, MFC_FMT_RAW); ctx->img_width = pix_fmt_mp->width; ctx->img_height = pix_fmt_mp->height; mfc_debug(2, "codec number: %d\n", ctx->src_fmt->codec_mode); -- cgit v1.2.3 From 66da64f06755134aee54d127bca54159fbbdcfb8 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 15 Jun 2013 08:09:57 -0300 Subject: [media] media: coda: Fix DT driver data pointer for i.MX27 The data pointer should point to DT data, and not to the ID array. Signed-off-by: Alexander Shiyan Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/coda.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index df4ada880e42..bd9405df1bd6 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -1987,7 +1987,7 @@ MODULE_DEVICE_TABLE(platform, coda_platform_ids); #ifdef CONFIG_OF static const struct of_device_id coda_dt_ids[] = { - { .compatible = "fsl,imx27-vpu", .data = &coda_platform_ids[CODA_IMX27] }, + { .compatible = "fsl,imx27-vpu", .data = &coda_devdata[CODA_IMX27] }, { .compatible = "fsl,imx53-vpu", .data = &coda_devdata[CODA_IMX53] }, { /* sentinel */ } }; -- cgit v1.2.3 From 8b64f75588ad87c9d6daa385817a4d43af6877be Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 15 Jul 2013 02:36:23 -0300 Subject: [media] s5p-g2d: Fix registration failure Commit 1c1d86a1ea ("[media] v4l2: always require v4l2_dev, rename parent to dev_parent") expects v4l2_dev to be always set. It converted most of the drivers using the parent field of video_device to v4l2_dev field. G2D driver did not set the parent field. Hence it got left out. Without this patch we get the following boot warning and G2D driver fails to register the video device. WARNING: CPU: 0 PID: 1 at drivers/media/v4l2-core/v4l2-dev.c:775 __video_register_device+0xfc0/0x1028() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc1-00001-g1c3e372-dirty #9 [] (unwind_backtrace+0x0/0xf4) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x7c/0xb0) [] (dump_stack+0x7c/0xb0) from [] (warn_slowpath_common+0x6c/0x88) [] (warn_slowpath_common+0x6c/0x88) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (__video_register_device+0xfc0/0x1028) [] (__video_register_device+0xfc0/0x1028) from [] (g2d_probe+0x1f8/0x398) [] (g2d_probe+0x1f8/0x398) from [] (platform_drv_probe+0x14/0x18) [] (platform_drv_probe+0x14/0x18) from [] (driver_probe_device+0x108/0x220) [] (driver_probe_device+0x108/0x220) from [] (__driver_attach+0x8c/0x90) [] (__driver_attach+0x8c/0x90) from [] (bus_for_each_dev+0x60/0x94) [] (bus_for_each_dev+0x60/0x94) from [] (bus_add_driver+0x1c0/0x24c) [] (bus_add_driver+0x1c0/0x24c) from [] (driver_register+0x78/0x140) [] (driver_register+0x78/0x140) from [] (do_one_initcall+0xf8/0x144) [] (do_one_initcall+0xf8/0x144) from [] (kernel_init_freeable+0x13c/0x1d8) [] (kernel_init_freeable+0x13c/0x1d8) from [] (kernel_init+0xc/0x160) [] (kernel_init+0xc/0x160) from [] (ret_from_fork+0x14/0x3c) ---[ end trace 4e0ec028b0028e02 ]--- s5p-g2d 12800000.g2d: Failed to register video device s5p-g2d: probe of 12800000.g2d failed with error -22 Signed-off-by: Sachin Kamat Cc: Hans Verkuil Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-g2d/g2d.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c index 553d87e5ceab..fd6289d60cde 100644 --- a/drivers/media/platform/s5p-g2d/g2d.c +++ b/drivers/media/platform/s5p-g2d/g2d.c @@ -784,6 +784,7 @@ static int g2d_probe(struct platform_device *pdev) } *vfd = g2d_videodev; vfd->lock = &dev->mutex; + vfd->v4l2_dev = &dev->v4l2_dev; ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); if (ret) { v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); -- cgit v1.2.3 From 3f1a94ba9fce90dbe0d26806a027964bea7adc14 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 30 Jun 2013 04:40:32 -0300 Subject: [media] ml86v7667: fix compile warning: 'ret' set but not used media_build/v4l/ml86v7667.c: In function 'ml86v7667_s_ctrl': media_build/v4l/ml86v7667.c:120:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ And indeed, ret is set but not used. Let's actually return the error code. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ml86v7667.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c index efdc873e58d1..a9857022f71d 100644 --- a/drivers/media/i2c/ml86v7667.c +++ b/drivers/media/i2c/ml86v7667.c @@ -117,7 +117,7 @@ static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; + int ret = -EINVAL; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: @@ -157,7 +157,7 @@ static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl) break; } - return 0; + return ret; } static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) -- cgit v1.2.3 From a34cacab1565fdee77544b12407274ffb4d9daa0 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 2 Jul 2013 07:56:38 -0300 Subject: [media] usbtv: Fix deinterlacing The image data is laid out a bit more weirdly and thus needs more work to properly interlace. What we get from hardware is V4L2_FIELD_ALTERNATE, but since userspace support for it is practically nonexistent, thus we make V4L2_FIELD_INTERLACED from it so that it's more easily interpreted. Signed-off-by: Lubomir Rintel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/usbtv/usbtv.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c index bf43f874685e..9dcc677f3015 100644 --- a/drivers/media/usb/usbtv/usbtv.c +++ b/drivers/media/usb/usbtv/usbtv.c @@ -57,7 +57,7 @@ #define USBTV_CHUNK_SIZE 256 #define USBTV_CHUNK 240 #define USBTV_CHUNKS (USBTV_WIDTH * USBTV_HEIGHT \ - / 2 / USBTV_CHUNK) + / 4 / USBTV_CHUNK) /* Chunk header. */ #define USBTV_MAGIC_OK(chunk) ((be32_to_cpu(chunk[0]) & 0xff000000) \ @@ -202,6 +202,26 @@ static int usbtv_setup_capture(struct usbtv *usbtv) return 0; } +/* Copy data from chunk into a frame buffer, deinterlacing the data + * into every second line. Unfortunately, they don't align nicely into + * 720 pixel lines, as the chunk is 240 words long, which is 480 pixels. + * Therefore, we break down the chunk into two halves before copyting, + * so that we can interleave a line if needed. */ +static void usbtv_chunk_to_vbuf(u32 *frame, u32 *src, int chunk_no, int odd) +{ + int half; + + for (half = 0; half < 2; half++) { + int part_no = chunk_no * 2 + half; + int line = part_no / 3; + int part_index = (line * 2 + !odd) * 3 + (part_no % 3); + + u32 *dst = &frame[part_index * USBTV_CHUNK/2]; + memcpy(dst, src, USBTV_CHUNK/2 * sizeof(*src)); + src += USBTV_CHUNK/2; + } +} + /* Called for each 256-byte image chunk. * First word identifies the chunk, followed by 240 words of image * data and padding. */ @@ -218,11 +238,6 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) frame_id = USBTV_FRAME_ID(chunk); odd = USBTV_ODD(chunk); chunk_no = USBTV_CHUNK_NO(chunk); - - /* Deinterlace. TODO: Use interlaced frame format. */ - chunk_no = (chunk_no - chunk_no % 3) * 2 + chunk_no % 3; - chunk_no += !odd * 3; - if (chunk_no >= USBTV_CHUNKS) return; @@ -241,12 +256,11 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) buf = list_first_entry(&usbtv->bufs, struct usbtv_buf, list); frame = vb2_plane_vaddr(&buf->vb, 0); - /* Copy the chunk. */ - memcpy(&frame[chunk_no * USBTV_CHUNK], &chunk[1], - USBTV_CHUNK * sizeof(chunk[1])); + /* Copy the chunk data. */ + usbtv_chunk_to_vbuf(frame, &chunk[1], chunk_no, odd); /* Last chunk in a frame, signalling an end */ - if (usbtv->frame_id && chunk_no == USBTV_CHUNKS-1) { + if (odd && chunk_no == USBTV_CHUNKS-1) { int size = vb2_plane_size(&buf->vb, 0); buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; @@ -518,7 +532,7 @@ static int usbtv_queue_setup(struct vb2_queue *vq, if (*nbuffers < 2) *nbuffers = 2; *nplanes = 1; - sizes[0] = USBTV_CHUNK * USBTV_CHUNKS * sizeof(u32); + sizes[0] = USBTV_WIDTH * USBTV_HEIGHT / 2 * sizeof(u32); return 0; } -- cgit v1.2.3 From f52dc448a344ddb90c8516c06656d62710baa869 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 2 Jul 2013 07:56:39 -0300 Subject: [media] usbtv: Throw corrupted frames away Ignore out of order data and mark incomplete buffers as errored. This gets rid of annoying flicker due to occassional garbage from hardware. Signed-off-by: Lubomir Rintel Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Cc: linux-kernel@vger.kernel.org Cc: linux-media@vger.kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/usbtv/usbtv.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c index 9dcc677f3015..91650173941a 100644 --- a/drivers/media/usb/usbtv/usbtv.c +++ b/drivers/media/usb/usbtv/usbtv.c @@ -89,6 +89,7 @@ struct usbtv { /* Number of currently processed frame, useful find * out when a new one begins. */ u32 frame_id; + int chunks_done; int iso_size; unsigned int sequence; @@ -242,8 +243,13 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) return; /* Beginning of a frame. */ - if (chunk_no == 0) + if (chunk_no == 0) { usbtv->frame_id = frame_id; + usbtv->chunks_done = 0; + } + + if (usbtv->frame_id != frame_id) + return; spin_lock_irqsave(&usbtv->buflock, flags); if (list_empty(&usbtv->bufs)) { @@ -258,16 +264,21 @@ static void usbtv_image_chunk(struct usbtv *usbtv, u32 *chunk) /* Copy the chunk data. */ usbtv_chunk_to_vbuf(frame, &chunk[1], chunk_no, odd); + usbtv->chunks_done++; /* Last chunk in a frame, signalling an end */ if (odd && chunk_no == USBTV_CHUNKS-1) { int size = vb2_plane_size(&buf->vb, 0); + enum vb2_buffer_state state = usbtv->chunks_done == + USBTV_CHUNKS ? + VB2_BUF_STATE_DONE : + VB2_BUF_STATE_ERROR; buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; buf->vb.v4l2_buf.sequence = usbtv->sequence++; v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); vb2_set_plane_payload(&buf->vb, 0, size); - vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); + vb2_buffer_done(&buf->vb, state); list_del(&buf->list); } -- cgit v1.2.3 From 4f24abb51ffe24d1a1442fdd3648a2e521487c1b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 28 Jun 2013 04:24:15 -0300 Subject: [media] usbtv: fix dependency This fixes a dependency problem as found by Randy Dunlap: https://lkml.org/lkml/2013/6/27/501 Reported-by: Randy Dunlap Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/usbtv/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig index 8864436464bf..7c5b86006ee6 100644 --- a/drivers/media/usb/usbtv/Kconfig +++ b/drivers/media/usb/usbtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_USBTV tristate "USBTV007 video capture support" - depends on VIDEO_DEV + depends on VIDEO_V4L2 select VIDEOBUF2_VMALLOC ---help--- -- cgit v1.2.3 From e2f11c58ae49d57b0e634685dd944c1771ba38c0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 3 Jul 2013 16:17:34 -0300 Subject: [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() free_buff_list and rec_buff_list are initialized in the middle of hdpvr_probe(), but if something bad happens before that, error handling code calls hdpvr_delete(), which contains iteration over the lists (via hdpvr_free_buffers()). The patch moves the lists initialization to the beginning and by the way fixes goto label in error handling of registering videodev. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/hdpvr/hdpvr-core.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c index cb694055ba7d..6e5070774dc2 100644 --- a/drivers/media/usb/hdpvr/hdpvr-core.c +++ b/drivers/media/usb/hdpvr/hdpvr-core.c @@ -303,6 +303,11 @@ static int hdpvr_probe(struct usb_interface *interface, dev->workqueue = 0; + /* init video transfer queues first of all */ + /* to prevent oops in hdpvr_delete() on error paths */ + INIT_LIST_HEAD(&dev->free_buff_list); + INIT_LIST_HEAD(&dev->rec_buff_list); + /* register v4l2_device early so it can be used for printks */ if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { dev_err(&interface->dev, "v4l2_device_register failed\n"); @@ -325,10 +330,6 @@ static int hdpvr_probe(struct usb_interface *interface, if (!dev->workqueue) goto error; - /* init video transfer queues */ - INIT_LIST_HEAD(&dev->free_buff_list); - INIT_LIST_HEAD(&dev->rec_buff_list); - dev->options = hdpvr_default_options; if (default_video_input < HDPVR_VIDEO_INPUTS) @@ -405,7 +406,7 @@ static int hdpvr_probe(struct usb_interface *interface, video_nr[atomic_inc_return(&dev_nr)]); if (retval < 0) { v4l2_err(&dev->v4l2_dev, "registering videodev failed\n"); - goto error; + goto reg_fail; } /* let the user know what node this device is now attached to */ -- cgit v1.2.3 From f813b5775b471b656382ae8f087bb34dc894261f Mon Sep 17 00:00:00 2001 From: Alban Browaeys Date: Tue, 16 Jul 2013 18:57:53 -0300 Subject: [media] em28xx: fix assignment of the eeprom data Set the config structure pointer to the eeprom data pointer (data, here eedata dereferenced) not the pointer to the pointer to the eeprom data (eedata itself). Signed-off-by: Alban Browaeys Signed-off-by: Frank Schäfer Cc: stable@vger.kernel.org # for v3.10 Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index 4851cc2e4a4d..c4ff9739a7ae 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -726,7 +726,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, *eedata = data; *eedata_len = len; - dev_config = (void *)eedata; + dev_config = (void *)*eedata; switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) { case 0: -- cgit v1.2.3 From 057b82be3ca3d066478e43b162fc082930a746c9 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 29 Jul 2013 14:16:13 +0930 Subject: virtio: console: fix race with port unplug and open/close There's a window between find_port_by_devt() returning a port and us taking a kref on the port, where the port could get unplugged. Fix it by taking the reference in find_port_by_devt() itself. Problem reported and analyzed by Mateusz Guzik. CC: Reported-by: Mateusz Guzik Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 8a15af3e1a9d..3beea9d478bc 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -272,9 +272,12 @@ static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev, unsigned long flags; spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->cdev->dev == dev) + list_for_each_entry(port, &portdev->ports, list) { + if (port->cdev->dev == dev) { + kref_get(&port->kref); goto out; + } + } port = NULL; out: spin_unlock_irqrestore(&portdev->ports_lock, flags); @@ -1036,14 +1039,10 @@ static int port_fops_open(struct inode *inode, struct file *filp) struct port *port; int ret; + /* We get the port with a kref here */ port = find_port_by_devt(cdev->dev); filp->private_data = port; - /* Prevent against a port getting hot-unplugged at the same time */ - spin_lock_irq(&port->portdev->ports_lock); - kref_get(&port->kref); - spin_unlock_irq(&port->portdev->ports_lock); - /* * Don't allow opening of console port devices -- that's done * via /dev/hvc -- cgit v1.2.3 From 671bdea2b9f210566610603ecbb6584c8a201c8c Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 29 Jul 2013 14:17:13 +0930 Subject: virtio: console: fix race in port_fops_open() and port unplug Between open() being called and processed, the port can be unplugged. Check if this happened, and bail out. A simple test script to reproduce this is: while true; do for i in $(seq 1 100); do echo $i > /dev/vport0p3; done; done; This opens and closes the port a lot of times; unplugging the port while this is happening triggers the bug. CC: Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 3beea9d478bc..ffa7e46faff9 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1041,6 +1041,10 @@ static int port_fops_open(struct inode *inode, struct file *filp) /* We get the port with a kref here */ port = find_port_by_devt(cdev->dev); + if (!port) { + /* Port was unplugged before we could proceed */ + return -ENXIO; + } filp->private_data = port; /* -- cgit v1.2.3 From ea3768b4386a8d1790f4cc9a35de4f55b92d6442 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 29 Jul 2013 14:20:29 +0930 Subject: virtio: console: clean up port data immediately at time of unplug We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [] ? warn_slowpath_common+0x87/0xc0 [] ? warn_slowpath_fmt+0x46/0x50 [] ? sysfs_add_one+0xc9/0x130 [] ? create_dir+0x68/0xb0 [] ? sysfs_create_dir+0x39/0x50 [] ? kobject_add_internal+0xb9/0x260 [] ? kobject_add_varg+0x38/0x60 [] ? kobject_add+0x44/0x70 [] ? get_device_parent+0xf4/0x1d0 [] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. CC: Reported-by: chayang Reported-by: YOGANANTH SUBRAMANIAN Reported-by: FuXiangChun Reported-by: Qunfang Zhang Reported-by: Sibiao Luo Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index ffa7e46faff9..4e684faee10b 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1518,14 +1518,6 @@ static void remove_port(struct kref *kref) port = container_of(kref, struct port, kref); - sysfs_remove_group(&port->dev->kobj, &port_attribute_group); - device_destroy(pdrvdata.class, port->dev->devt); - cdev_del(port->cdev); - - kfree(port->name); - - debugfs_remove(port->debugfs_file); - kfree(port); } @@ -1583,6 +1575,14 @@ static void unplug_port(struct port *port) */ port->portdev = NULL; + sysfs_remove_group(&port->dev->kobj, &port_attribute_group); + device_destroy(pdrvdata.class, port->dev->devt); + cdev_del(port->cdev); + + kfree(port->name); + + debugfs_remove(port->debugfs_file); + /* * Locks around here are not necessary - a port can't be * opened after we removed the port struct from ports_list -- cgit v1.2.3 From 92d3453815fbe74d539c86b60dab39ecdf01bb99 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 29 Jul 2013 14:21:32 +0930 Subject: virtio: console: fix raising SIGIO after port unplug SIGIO should be sent when a port gets unplugged. It should only be sent to prcesses that have the port opened, and have asked for SIGIO to be delivered. We were clearing out guest_connected before calling send_sigio_to_port(), resulting in a sigio not getting sent to processes. Fix by setting guest_connected to false after invoking the sigio function. CC: Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 4e684faee10b..e4845f1c9a0b 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1551,12 +1551,14 @@ static void unplug_port(struct port *port) spin_unlock_irq(&port->portdev->ports_lock); if (port->guest_connected) { + /* Let the app know the port is going down. */ + send_sigio_to_port(port); + + /* Do this after sigio is actually sent */ port->guest_connected = false; port->host_connected = false; - wake_up_interruptible(&port->waitqueue); - /* Let the app know the port is going down. */ - send_sigio_to_port(port); + wake_up_interruptible(&port->waitqueue); } if (is_console_port(port)) { -- cgit v1.2.3 From 96f97a83910cdb9d89d127c5ee523f8fc040a804 Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Mon, 29 Jul 2013 14:23:21 +0930 Subject: virtio: console: return -ENODEV on all read operations after unplug If a port gets unplugged while a user is blocked on read(), -ENODEV is returned. However, subsequent read()s returned 0, indicating there's no host-side connection (but not indicating the device went away). This also happened when a port was unplugged and the user didn't have any blocking operation pending. If the user didn't monitor the SIGIO signal, they won't have a chance to find out if the port went away. Fix by returning -ENODEV on all read()s after the port gets unplugged. write() already behaves this way. CC: Signed-off-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index e4845f1c9a0b..fc45567ad3ac 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -749,6 +749,10 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf, port = filp->private_data; + /* Port is hot-unplugged. */ + if (!port->guest_connected) + return -ENODEV; + if (!port_has_data(port)) { /* * If nothing's connected on the host just return 0 in @@ -765,7 +769,7 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf, if (ret < 0) return ret; } - /* Port got hot-unplugged. */ + /* Port got hot-unplugged while we were waiting above. */ if (!port->guest_connected) return -ENODEV; /* -- cgit v1.2.3 From 71ab1d58c26eb7c30711caa95c173d5c39ab8855 Mon Sep 17 00:00:00 2001 From: Niels de Vos Date: Mon, 29 Jul 2013 09:38:38 +0200 Subject: pata_imx: expose module alias for loading from device-tree Enable auto loading by udev when pata_imx is compiled as a module. Signed-off-by: Niels de Vos Cc: Sascha Hauer Signed-off-by: Tejun Heo --- drivers/ata/pata_imx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c index 4ec7c04b3f82..26386f0b89a8 100644 --- a/drivers/ata/pata_imx.c +++ b/drivers/ata/pata_imx.c @@ -237,6 +237,7 @@ static const struct of_device_id imx_pata_dt_ids[] = { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, imx_pata_dt_ids); static struct platform_driver pata_imx_driver = { .probe = pata_imx_probe, -- cgit v1.2.3 From 02073798a6b081bf74e6c10d6f7e7a693c067ecd Mon Sep 17 00:00:00 2001 From: Piotr Sarna Date: Mon, 29 Jul 2013 12:25:20 +0200 Subject: staging: zcache: fix "zcache=" kernel parameter Commit 835f2f5 ("staging: zcache: enable zcache to be built/loaded as a module") introduced an incorrect handling of "zcache=" parameter. Inside zcache_comp_init() function, zcache_comp_name variable is checked for being empty. If not empty, the above variable is tested for being compatible with Crypto API. Unfortunately, after that function ends unconditionally (by the "goto out" directive) and returns: - non-zero value if verification succeeded, wrongly indicating an error - zero value if verification failed, falsely informing that function zcache_comp_init() ended properly. A solution to this problem is as following: 1. Move the "goto out" directive inside the "if (!ret)" statement 2. In case that crypto_has_comp() returned 0, change the value of ret to non-zero before "goto out" to indicate an error. This patch replaces an earlier one from Michal Hocko (based on report from Cristian Rodriguez): http://permalink.gmane.org/gmane.linux.kernel.mm/102484 It also addressed the same issue but didn't fix the zcache_comp_init() for case when the compressor data passed to "zcache=" option was invalid or unsupported. Signed-off-by: Piotr Sarna [bzolnier: updated patch description] Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Acked-by: Konrad Rzeszutek Wilk Acked-by: Michal Hocko Cc: stable # 3.10 Cc: Cristian Rodriguez Cc: Bob Liu Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index dcceed29d31a..81972fa47beb 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1811,10 +1811,12 @@ static int zcache_comp_init(void) #else if (*zcache_comp_name != '\0') { ret = crypto_has_comp(zcache_comp_name, 0, 0); - if (!ret) + if (!ret) { pr_info("zcache: %s not supported\n", zcache_comp_name); - goto out; + ret = 1; + goto out; + } } if (!ret) strcpy(zcache_comp_name, "lzo"); -- cgit v1.2.3 From 89c66ee890af18500fa4598db300cc07c267f900 Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Mon, 29 Jul 2013 20:54:09 +0200 Subject: spi: spi-davinci: Fix direction in dma_map_single() Commit 048177ce3b3962852fd34a7e04938959271c7e70 (spi: spi-davinci: convert to DMA engine API) introduced a regression: dma_map_single() is called with direction DMA_FROM_DEVICE for rx and for tx. Signed-off-by: Christian Eggers Acked-by: Matt Porter Signed-off-by: Mark Brown Cc: stable@vger.kernel.org # v3.7.x+ --- drivers/spi/spi-davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 222d3e37fc28..707966bd5610 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -609,7 +609,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) else buf = (void *)t->tx_buf; t->tx_dma = dma_map_single(&spi->dev, buf, - t->len, DMA_FROM_DEVICE); + t->len, DMA_TO_DEVICE); if (!t->tx_dma) { ret = -EFAULT; goto err_tx_map; -- cgit v1.2.3 From 0e003b709ef9f4c43f6338834526c3556ea71b19 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 30 Jul 2013 10:49:43 +0200 Subject: s390/dasd: fix hanging devices after path events The processing of the dasd_block tasklet may have been interrupted by a path event. Restart the dasd tasklets in sleep_on_immediately function. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 17150a778984..451bf99582ff 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2392,6 +2392,12 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) rc = cqr->intrc; else rc = -EIO; + + /* kick tasklets */ + dasd_schedule_device_bh(device); + if (device->block) + dasd_schedule_block_bh(device->block); + return rc; } -- cgit v1.2.3 From 3c4d9276626c93477af0b0b9d46b4dcb37e2eed2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 23 Jul 2013 23:12:41 -0700 Subject: shdma: fixup sh_dmae_get_partial() calculation error sh_desc->hw.tcr is controlling real data size, and, register TCR is controlling data transfer count which was xmit_shifted value of hw.tcr. Current sh_dmae_get_partial() is calculating in different unit. This patch fixes it. This bug has been present since c014906a870ce70e009def0c9d170ccabeb0be63 ("dmaengine: shdma: extend .device_terminate_all() to record partial transfer"), which was added in 2.6.34-rc1. Cc: Vinod Koul Signed-off-by: Kuninori Morimoto Acked-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- drivers/dma/sh/shdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c index b67f45f5c271..5039fbc88254 100644 --- a/drivers/dma/sh/shdma.c +++ b/drivers/dma/sh/shdma.c @@ -400,8 +400,8 @@ static size_t sh_dmae_get_partial(struct shdma_chan *schan, shdma_chan); struct sh_dmae_desc *sh_desc = container_of(sdesc, struct sh_dmae_desc, shdma_desc); - return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) << - sh_chan->xmit_shift; + return sh_desc->hw.tcr - + (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift); } /* Called from error IRQ or NMI */ -- cgit v1.2.3 From 481f2d4f89f87a0baa26147f323380e31cfa7c44 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Tue, 30 Jul 2013 19:51:20 -0700 Subject: usb: core: don't try to reset_device() a port that got just disconnected The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4a8a1d68002c..558313de4911 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4798,7 +4798,8 @@ static void hub_events(void) hub->ports[i - 1]->child; dev_dbg(hub_dev, "warm reset port %d\n", i); - if (!udev) { + if (!udev || !(portstatus & + USB_PORT_STAT_CONNECTION)) { status = hub_port_reset(hub, i, NULL, HUB_BH_RESET_TIME, true); @@ -4808,8 +4809,8 @@ static void hub_events(void) usb_lock_device(udev); status = usb_reset_device(udev); usb_unlock_device(udev); + connect_change = 0; } - connect_change = 0; } if (connect_change) -- cgit v1.2.3 From 008eb957dafea32bac993be5cbeaf4ca0ee8b0aa Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 26 Jul 2013 13:34:43 +0100 Subject: usb: xhci: add missing dma-mapping.h includes A randconfig build hit the following build errors because xhci.c and xhci-mem.c use dma mapping functions but don't include . Add the missing includes to fix the build errors. drivers/usb/host/xhci.c In function 'xhci_gen_setup': drivers/usb/host/xhci.c +4872 : error: implicit declaration of function 'dma_set_mask' drivers/usb/host/xhci.c +4872 : error: implicit declaration of function 'DMA_BIT_MASK' drivers/usb/host/xhci-mem.c In function 'xhci_free_stream_ctx': drivers/usb/host/xhci-mem.c +435 : error: implicit declaration of function 'dma_free_coherent' drivers/usb/host/xhci-mem.c In function 'xhci_alloc_stream_ctx': drivers/usb/host/xhci-mem.c +463 : error: implicit declaration of function 'dma_alloc_coherent' Signed-off-by: James Hogan Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 1 + drivers/usb/host/xhci.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index df6978abd7e6..6f8c2fd47675 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "xhci.h" diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 41eb4fc33453..9478caa2f71f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "xhci.h" -- cgit v1.2.3 From aa52aeea2725839bdd3dcce394486e9a043065e0 Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 1 Aug 2013 11:07:18 +0930 Subject: virtio-scsi: Fix virtqueue affinity setup vscsi->num_queues counts the number of request virtqueue which does not include the control and event virtqueue. It is wrong to subtract VIRTIO_SCSI_VQ_BASE from vscsi->num_queues. This patch fixes the following panic. (qemu) device_del scsi0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] __virtscsi_set_affinity+0x6f/0x120 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 659 Comm: kworker/0:1 Not tainted 3.11.0-rc2+ #1172 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kacpi_hotplug _handle_hotplug_event_func task: ffff88007bee1cc0 ti: ffff88007bfe4000 task.ti: ffff88007bfe4000 RIP: 0010:[] [] __virtscsi_set_affinity+0x6f/0x120 RSP: 0018:ffff88007bfe5a38 EFLAGS: 00010202 RAX: 0000000000000010 RBX: ffff880077fd0d28 RCX: 0000000000000050 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 RBP: ffff88007bfe5a58 R08: ffff880077f6ff00 R09: 0000000000000001 R10: ffffffff8143e673 R11: 0000000000000001 R12: 0000000000000001 R13: ffff880077fd0800 R14: 0000000000000000 R15: ffff88007bf489b0 FS: 0000000000000000(0000) GS:ffff88007ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000079f8b000 CR4: 00000000000006f0 Stack: ffff880077fd0d28 0000000000000000 ffff880077fd0800 0000000000000008 ffff88007bfe5a78 ffffffff8179b37d ffff88007bccc800 ffff88007bccc800 ffff88007bfe5a98 ffffffff8179b3b6 ffff88007bccc800 ffff880077fd0d28 Call Trace: [] virtscsi_set_affinity+0x2d/0x40 [] virtscsi_remove_vqs+0x26/0x50 [] virtscsi_remove+0x82/0xa0 [] virtio_dev_remove+0x22/0x70 [] __device_release_driver+0x69/0xd0 [] device_release_driver+0x2d/0x40 [] bus_remove_device+0x116/0x150 [] device_del+0x126/0x1e0 [] device_unregister+0x16/0x30 [] unregister_virtio_device+0x19/0x30 [] virtio_pci_remove+0x36/0x80 [] pci_device_remove+0x37/0x70 [] __device_release_driver+0x69/0xd0 [] device_release_driver+0x2d/0x40 [] bus_remove_device+0x116/0x150 [] device_del+0x126/0x1e0 [] pci_stop_bus_device+0x9c/0xb0 [] pci_stop_and_remove_bus_device+0x16/0x30 [] acpiphp_disable_slot+0x8e/0x150 [] hotplug_event_func+0xba/0x1a0 [] ? acpi_os_release_object+0xe/0x12 [] _handle_hotplug_event_func+0x31/0x70 [] process_one_work+0x183/0x500 [] worker_thread+0x122/0x400 [] ? manage_workers+0x2d0/0x2d0 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Code: 01 00 00 00 74 59 45 31 e4 83 bb c8 01 00 00 02 74 46 66 2e 0f 1f 84 00 00 00 00 00 49 63 c4 48 c1 e0 04 48 8b bc 0 3 10 02 00 00 <48> 8b 47 20 48 8b 80 d0 01 00 00 48 8b 40 50 48 85 c0 74 07 be RIP [] __virtscsi_set_affinity+0x6f/0x120 RSP CR2: 0000000000000020 ---[ end trace 99679331a3775f48 ]--- CC: stable@vger.kernel.org Signed-off-by: Asias He Reviewed-by: Wanlong Gao Signed-off-by: Rusty Russell --- drivers/scsi/virtio_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 2168258fb2c3..74b88efde6ad 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -751,7 +751,7 @@ static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) vscsi->affinity_hint_set = true; } else { - for (i = 0; i < vscsi->num_queues - VIRTIO_SCSI_VQ_BASE; i++) + for (i = 0; i < vscsi->num_queues; i++) virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1); vscsi->affinity_hint_set = false; -- cgit v1.2.3 From 005358c8c05998bef5e136ca7e7d6b1dc5326b49 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 2 Aug 2013 10:15:01 +0300 Subject: OMAPDSS: analog-tv-connector: compile fix connector-analog-tv.c uses omap_dss_pal_timings, defined in omapdss's venc.c, for default timings. omap_dss_pal_timings only exists when VENC is enabled in the kernel config, so disabling VENC breaks omap_dss_pal_timings connector-analog-tv compilation. Instead of adding dependency to VENC, add internal default timings to the connector driver, because the connector driver should not depend on VENC, and it can be used with any other analog TV encoder. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays-new/connector-analog-tv.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/omap2/displays-new/connector-analog-tv.c index 5338f362293b..1b60698f141e 100644 --- a/drivers/video/omap2/displays-new/connector-analog-tv.c +++ b/drivers/video/omap2/displays-new/connector-analog-tv.c @@ -28,6 +28,20 @@ struct panel_drv_data { bool invert_polarity; }; +static const struct omap_video_timings tvc_pal_timings = { + .x_res = 720, + .y_res = 574, + .pixel_clock = 13500, + .hsw = 64, + .hfp = 12, + .hbp = 68, + .vsw = 5, + .vfp = 5, + .vbp = 41, + + .interlace = true, +}; + #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev) static int tvc_connect(struct omap_dss_device *dssdev) @@ -212,14 +226,14 @@ static int tvc_probe(struct platform_device *pdev) return -ENODEV; } - ddata->timings = omap_dss_pal_timings; + ddata->timings = tvc_pal_timings; dssdev = &ddata->dssdev; dssdev->driver = &tvc_driver; dssdev->dev = &pdev->dev; dssdev->type = OMAP_DISPLAY_TYPE_VENC; dssdev->owner = THIS_MODULE; - dssdev->panel.timings = omap_dss_pal_timings; + dssdev->panel.timings = tvc_pal_timings; r = omapdss_register_display(dssdev); if (r) { -- cgit v1.2.3 From 208df1e4cbb13140d2f822cd2b15c00b51978776 Mon Sep 17 00:00:00 2001 From: Hector Palacios Date: Thu, 1 Aug 2013 10:40:35 +0200 Subject: video: mxsfb: fix color settings for 18bit data bus and 32bpp For a combination of 18bit LCD data bus width and a color mode of 32bpp, the driver was setting the color mapping to rgb666, which is wrong, as the color in memory realy has an rgb888 layout. This patch also removes the setting of flag CTRL_DF24 that makes the driver dimiss the upper 2 bits when handling 32/24bpp colors in a diplay with 18bit data bus width. This flag made true color images display wrong in such configurations. Finally, the color mapping rgb666 has also been removed as nobody is using it and high level applications like Qt5 cannot work with it either. Reference: https://lkml.org/lkml/2013/5/23/220 Signed-off-by: Hector Palacios Acked-by: Juergen Beisert Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Signed-off-by: Tomi Valkeinen --- drivers/video/mxsfb.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'drivers') diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 3ba37713b1f9..dc09ebe4aba5 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -239,24 +239,6 @@ static const struct fb_bitfield def_rgb565[] = { } }; -static const struct fb_bitfield def_rgb666[] = { - [RED] = { - .offset = 16, - .length = 6, - }, - [GREEN] = { - .offset = 8, - .length = 6, - }, - [BLUE] = { - .offset = 0, - .length = 6, - }, - [TRANSP] = { /* no support for transparency */ - .length = 0, - } -}; - static const struct fb_bitfield def_rgb888[] = { [RED] = { .offset = 16, @@ -309,9 +291,6 @@ static int mxsfb_check_var(struct fb_var_screeninfo *var, break; case STMLCDIF_16BIT: case STMLCDIF_18BIT: - /* 24 bit to 18 bit mapping */ - rgb = def_rgb666; - break; case STMLCDIF_24BIT: /* real 24 bit */ rgb = def_rgb888; @@ -453,11 +432,6 @@ static int mxsfb_set_par(struct fb_info *fb_info) return -EINVAL; case STMLCDIF_16BIT: case STMLCDIF_18BIT: - /* 24 bit to 18 bit mapping */ - ctrl |= CTRL_DF24; /* ignore the upper 2 bits in - * each colour component - */ - break; case STMLCDIF_24BIT: /* real 24 bit */ break; -- cgit v1.2.3 From 6431f5d7c6025f8b007af06ea090de308f7e6881 Mon Sep 17 00:00:00 2001 From: Sumit.Saxena@lsi.com Date: Tue, 16 Jul 2013 02:26:05 +0530 Subject: [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel Problem: When Hardware IOMMU is on, megaraid_sas driver initialization fails in kdump kernel with LSI MegaRAID controller(device id-0x73). Actually this issue needs fix in firmware, but for firmware running in field, this driver fix is proposed to resolve the issue. At firmware initialization time, if firmware does not come to ready state, driver will reset the adapter and retry for firmware transition to ready state unconditionally(not only executed for kdump kernel). Signed-off-by: Sumit Saxena Signed-off-by: Kashyap Desai Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_base.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0177295599e0..1f0ca68409d4 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -3547,11 +3547,21 @@ static int megasas_init_fw(struct megasas_instance *instance) break; } - /* - * We expect the FW state to be READY - */ - if (megasas_transition_to_ready(instance, 0)) - goto fail_ready_state; + if (megasas_transition_to_ready(instance, 0)) { + atomic_set(&instance->fw_reset_no_pci_access, 1); + instance->instancet->adp_reset + (instance, instance->reg_set); + atomic_set(&instance->fw_reset_no_pci_access, 0); + dev_info(&instance->pdev->dev, + "megasas: FW restarted successfully from %s!\n", + __func__); + + /*waitting for about 30 second before retry*/ + ssleep(30); + + if (megasas_transition_to_ready(instance, 0)) + goto fail_ready_state; + } /* * MSI-X host index 0 is common for all adapter. -- cgit v1.2.3 From e09056b25c38357df5c01985a0b3af608bccbfc0 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Tue, 23 Jul 2013 13:04:58 -0700 Subject: [SCSI] fnic: BUG: sleeping function called from invalid context during probe I hit this during driver probe with the latest fnic updates (this trace is from a backport into a distro kernel, but the issue is the same). > BUG: sleeping function called from invalid context at mm/slab.c:3113 > in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu > INFO: lockdep is turned off. > irq event stamp: 0 > hardirqs last enabled at (0): [<(null)>] (null) > hardirqs last disabled at (0): [] > copy_process+0x5e5/0x1670 > softirqs last enabled at (0): [] > copy_process+0x5e5/0x1670 > softirqs last disabled at (0): [<(null)>] (null) > Pid: 610, comm: work_for_cpu Not tainted > Call Trace: > [] ? print_irqtrace_events+0xd0/0xe0 > [] ? __might_sleep+0xf7/0x130 > [] ? kmem_cache_alloc_trace+0x20b/0x2d0 > [] ? __create_workqueue_key+0x3e/0x1d0 > [] ? __create_workqueue_key+0x3e/0x1d0 > [] ? fnic_probe+0x977/0x11aa [fnic] > [] ? fnic_probe+0x9a3/0x11aa [fnic] > [] ? do_work_for_cpu+0x0/0x30 > [] ? local_pci_probe+0x17/0x20 > [] ? do_work_for_cpu+0x18/0x30 > [] ? kthread+0x96/0xa0 > [] ? child_rip+0xa/0x20 > [] ? _spin_unlock_irq+0x30/0x40 > [] ? restore_args+0x0/0x30 > [] ? kthread+0x0/0xa0 > [] ? child_rip+0x0/0x20 The problem is in this hunk of "FIP VLAN Discovery Feature Support" (d3c995f1dcf938f1084388d92b8fb97bec366566) create_singlethreaded_workqueue cannot be called with irqs disabled @@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev *pdev, vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0); vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS); vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr); + fnic->set_vlan = fnic_set_vlan; fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO); + setup_timer(&fnic->fip_timer, fnic_fip_notify_timer, + (unsigned long)fnic); + spin_lock_init(&fnic->vlans_lock); + INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame); + INIT_WORK(&fnic->event_work, fnic_handle_event); + skb_queue_head_init(&fnic->fip_frame_queue); + spin_lock_irqsave(&fnic_list_lock, flags); + if (!fnic_fip_queue) { + fnic_fip_queue = + create_singlethread_workqueue("fnic_fip_q"); + if (!fnic_fip_queue) { + spin_unlock_irqrestore(&fnic_list_lock, flags); + printk(KERN_ERR PFX "fnic FIP work queue " + "create failed\n"); + err = -ENOMEM; + goto err_out_free_max_pool; + } + } + spin_unlock_irqrestore(&fnic_list_lock, flags); + INIT_LIST_HEAD(&fnic->evlist); + INIT_LIST_HEAD(&fnic->vlans); } else { shost_printk(KERN_INFO, fnic->lport->host, "firmware uses non-FIP mode\n"); The attempts to make fnic_fip_queue a single instance for the driver while it's being created in probe look awkward anyway, why is this not created in fnic_init_module like the event workqueue? Signed-off-by: Chris Leech Tested-by: Anantha Tungarakodi Acked-by: Hiral Patel Signed-off-by: James Bottomley --- drivers/scsi/fnic/fnic.h | 2 +- drivers/scsi/fnic/fnic_main.c | 22 +++++++++------------- 2 files changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index b6d1f92ed33c..c18c68150e9f 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -38,7 +38,7 @@ #define DRV_NAME "fnic" #define DRV_DESCRIPTION "Cisco FCoE HBA Driver" -#define DRV_VERSION "1.5.0.22" +#define DRV_VERSION "1.5.0.23" #define PFX DRV_NAME ": " #define DFX DRV_NAME "%d: " diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index 5f09d1814d26..42e15ee6e1bb 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -642,19 +642,6 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame); INIT_WORK(&fnic->event_work, fnic_handle_event); skb_queue_head_init(&fnic->fip_frame_queue); - spin_lock_irqsave(&fnic_list_lock, flags); - if (!fnic_fip_queue) { - fnic_fip_queue = - create_singlethread_workqueue("fnic_fip_q"); - if (!fnic_fip_queue) { - spin_unlock_irqrestore(&fnic_list_lock, flags); - printk(KERN_ERR PFX "fnic FIP work queue " - "create failed\n"); - err = -ENOMEM; - goto err_out_free_max_pool; - } - } - spin_unlock_irqrestore(&fnic_list_lock, flags); INIT_LIST_HEAD(&fnic->evlist); INIT_LIST_HEAD(&fnic->vlans); } else { @@ -960,6 +947,13 @@ static int __init fnic_init_module(void) spin_lock_init(&fnic_list_lock); INIT_LIST_HEAD(&fnic_list); + fnic_fip_queue = create_singlethread_workqueue("fnic_fip_q"); + if (!fnic_fip_queue) { + printk(KERN_ERR PFX "fnic FIP work queue create failed\n"); + err = -ENOMEM; + goto err_create_fip_workq; + } + fnic_fc_transport = fc_attach_transport(&fnic_fc_functions); if (!fnic_fc_transport) { printk(KERN_ERR PFX "fc_attach_transport error\n"); @@ -978,6 +972,8 @@ static int __init fnic_init_module(void) err_pci_register: fc_release_transport(fnic_fc_transport); err_fc_transport: + destroy_workqueue(fnic_fip_queue); +err_create_fip_workq: destroy_workqueue(fnic_event_queue); err_create_fnic_workq: kmem_cache_destroy(fnic_io_req_cache); -- cgit v1.2.3 From 7562523e84ddc742fe1f9db8bd76b01acca89f6b Mon Sep 17 00:00:00 2001 From: Martin K. Petersen Date: Tue, 30 Jul 2013 22:58:34 -0400 Subject: [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set If a device has the skip_vpd_pages flag set we should simply fail the scsi_get_vpd_page() call. Signed-off-by: Martin K. Petersen Acked-by: Alan Stern Tested-by: Stuart Foster Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 3b1ea34e1f5a..eaa808e6ba91 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -1031,6 +1031,9 @@ int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf, { int i, result; + if (sdev->skip_vpd_pages) + goto fail; + /* Ask for all the pages supported by this device */ result = scsi_vpd_inquiry(sdev, buf, 0, buf_len); if (result) -- cgit v1.2.3 From b3b301c5fed8a0868e56c98b922cb0c881b3857d Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Sat, 3 Aug 2013 23:00:25 +0200 Subject: ACPI / video: improve quirk check in acpi_video_bqc_quirk() If the _BCL package ordering is descending, the first level (br->levels[2]) is likely to be 0, and if the number of levels matches the number of steps, we might confuse a returned level to mean the index. For example: current_level = max_level = 100 test_level = 0 returned level = 100 In this case 100 means the level, not the index, and _BCM failed. Still, if the _BCL package ordering is descending, the index of level 0 is also 100, so we assume _BQC is indexed, when it's not. This causes all _BQC calls to return bogus values causing weird behavior from the user's perspective. For example: xbacklight -set 10; xbacklight -set 20; would flash to 90% and then slowly down to the desired level (20). The solution is simple; test anything other than the first level (e.g. 1). [rjw: Changelog] Signed-off-by: Felipe Contreras Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 0ec434d2586d..e1284b8dc6ee 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -689,7 +689,7 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device, * Some systems always report current brightness level as maximum * through _BQC, we need to test another value for them. */ - test_level = current_level == max_level ? br->levels[2] : max_level; + test_level = current_level == max_level ? br->levels[3] : max_level; result = acpi_video_device_lcd_set_level(device, test_level); if (result) -- cgit v1.2.3 From d6e102f498cbcc8dd2e36721a01213f036397112 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 1 Jul 2013 18:14:21 -0300 Subject: i2c: i2c-mxs: Use DMA mode even for small transfers Recently we have been seing some reports about PIO mode not working properly. - http://www.spinics.net/lists/linux-i2c/msg11985.html - http://marc.info/?l=linux-i2c&m=137235593101385&w=2 - https://lkml.org/lkml/2013/6/24/430 Let's use DMA mode even for small transfers. Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when touchscreen is enabled: [ 5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000 [ 9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19 [ 9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19 [ 9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19) Cc: Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Acked-by: Lucas Stach Acked-by: Marek Vasut [wsa: we have a proper solution for -next, so this non intrusive solution is OK for now] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index df8ff5aea5b5..e2e9a0dade96 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -493,7 +493,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, * based on this empirical measurement and a lot of previous frobbing. */ i2c->cmd_err = 0; - if (msg->len < 8) { + if (0) { /* disable PIO mode until a proper fix is made */ ret = mxs_i2c_pio_setup_xfer(adap, msg, flags); if (ret) mxs_i2c_reset(i2c); -- cgit v1.2.3 From 4c715661d9a2ceb12434784f10d252f353251906 Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Fri, 26 Jul 2013 14:04:55 +0200 Subject: i2c: Fix Kontron PLD prescaler calculation Add some necessary braces that have been removed during driver cleanup. This fixes the I2C prescaler calculation. Signed-off-by: Michael Brunner Tested-by: Guenter Roeck Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-kempld.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c index ccec916bc3eb..af8f65fb1c05 100644 --- a/drivers/i2c/busses/i2c-kempld.c +++ b/drivers/i2c/busses/i2c-kempld.c @@ -246,9 +246,9 @@ static void kempld_i2c_device_init(struct kempld_i2c_data *i2c) bus_frequency = KEMPLD_I2C_FREQ_MAX; if (pld->info.spec_major == 1) - prescale = pld->pld_clock / bus_frequency * 5 - 1000; + prescale = pld->pld_clock / (bus_frequency * 5) - 1000; else - prescale = pld->pld_clock / bus_frequency * 4 - 3000; + prescale = pld->pld_clock / (bus_frequency * 4) - 3000; if (prescale < 0) prescale = 0; -- cgit v1.2.3 From 2d49b5987561e480bdbd8692b27fc5f49a1e2f0b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 5 Aug 2013 11:21:29 +0200 Subject: regmap: cache: Make sure to sync the last register in a block regcache_sync_block_raw_flush() expects the address of the register after last register that needs to be synced as its parameter. But the last call to regcache_sync_block_raw_flush() in regcache_sync_block_raw() passes the address of the last register in the block. This effectively always skips over the last register in a block, even if it needs to be synced. In order to fix it increase the address by one register. The issue was introduced in commit 75a5f89 ("regmap: cache: Write consecutive registers in a single block write"). Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/base/regmap/regcache.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index e69102696533..3455f833e473 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -719,7 +719,8 @@ static int regcache_sync_block_raw(struct regmap *map, void *block, } } - return regcache_sync_block_raw_flush(map, &data, base, regtmp); + return regcache_sync_block_raw_flush(map, &data, base, regtmp + + map->reg_stride); } int regcache_sync_block(struct regmap *map, void *block, -- cgit v1.2.3 From 623cf33cb055b1e81fa47e4fc16789b2c129e31e Mon Sep 17 00:00:00 2001 From: Rafael J. Wysocki Date: Tue, 6 Aug 2013 02:26:22 +0200 Subject: ACPI / PM: Walk physical_node_list under physical_node_lock The list of physical devices corresponding to an ACPI device object is walked by acpi_system_wakeup_device_seq_show() and physical_device_enable_wakeup() without taking that object's physical_node_lock mutex. Since each of those functions may be run at any time as a result of a user space action, the lack of appropriate locking in them may lead to a kernel crash if that happens during device hot-add or hot-remove involving the device object in question. Fix the issue by modifying acpi_system_wakeup_device_seq_show() and physical_device_enable_wakeup() to use physical_node_lock as appropriate. Signed-off-by: Rafael J. Wysocki Cc: All --- drivers/acpi/proc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index aa1227a7e3f2..04a13784dd20 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -311,6 +311,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->pnp.bus_id, (u32) dev->wakeup.sleep_state); + mutex_lock(&dev->physical_node_lock); + if (!dev->physical_node_count) { seq_printf(seq, "%c%-8s\n", dev->wakeup.flags.run_wake ? '*' : ' ', @@ -338,6 +340,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) put_device(ldev); } } + + mutex_unlock(&dev->physical_node_lock); } mutex_unlock(&acpi_device_lock); return 0; @@ -347,12 +351,16 @@ static void physical_device_enable_wakeup(struct acpi_device *adev) { struct acpi_device_physical_node *entry; + mutex_lock(&adev->physical_node_lock); + list_for_each_entry(entry, &adev->physical_node_list, node) if (entry->dev && device_can_wakeup(entry->dev)) { bool enable = !device_may_wakeup(entry->dev); device_set_wakeup_enable(entry->dev, enable); } + + mutex_unlock(&adev->physical_node_lock); } static ssize_t -- cgit v1.2.3 From 007ccfcf89401e764c33965b739310d86a94626d Mon Sep 17 00:00:00 2001 From: Rafael J. Wysocki Date: Tue, 6 Aug 2013 14:32:54 +0200 Subject: ACPI: Drop physical_node_id_bitmap from struct acpi_device The physical_node_id_bitmap in struct acpi_device is only used for looking up the first currently unused dependent phyiscal node ID by acpi_bind_one(). It is not really necessary, however, because acpi_bind_one() walks the entire physical_node_list of the given device object for sanity checking anyway and if that list is always sorted by node_id, it is straightforward to find the first gap between the currently used node IDs and use that number as the ID of the new list node. This also removes the artificial limit of the maximum number of dependent physical devices per ACPI device object, which now depends only on the capacity of unsigend int. As a result, it fixes a regression introduced by commit e2ff394 (ACPI / memhotplug: Bind removable memory blocks to ACPI device nodes) that caused acpi_memory_enable_device() to fail when the number of 128 MB blocks within one removable memory module was greater than 32. Reported-and-tested-by: Yasuaki Ishimatsu Signed-off-by: Rafael J. Wysocki Acked-by: Toshi Kani Reviewed-by: Yasuaki Ishimatsu --- drivers/acpi/glue.c | 34 +++++++++++++++++++--------------- include/acpi/acpi_bus.h | 8 ++------ 2 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index f68095756fb7..17e15d11bd39 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -31,6 +31,7 @@ static LIST_HEAD(bus_type_list); static DECLARE_RWSEM(bus_type_sem); #define PHYSICAL_NODE_STRING "physical_node" +#define PHYSICAL_NODE_NAME_SIZE (sizeof(PHYSICAL_NODE_STRING) + 10) int register_acpi_bus_type(struct acpi_bus_type *type) { @@ -112,7 +113,9 @@ int acpi_bind_one(struct device *dev, acpi_handle handle) struct acpi_device *acpi_dev; acpi_status status; struct acpi_device_physical_node *physical_node, *pn; - char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2]; + char physical_node_name[PHYSICAL_NODE_NAME_SIZE]; + struct list_head *physnode_list; + unsigned int node_id; int retval = -EINVAL; if (ACPI_HANDLE(dev)) { @@ -139,25 +142,27 @@ int acpi_bind_one(struct device *dev, acpi_handle handle) mutex_lock(&acpi_dev->physical_node_lock); - /* Sanity check. */ - list_for_each_entry(pn, &acpi_dev->physical_node_list, node) + /* + * Keep the list sorted by node_id so that the IDs of removed nodes can + * be recycled easily. + */ + physnode_list = &acpi_dev->physical_node_list; + node_id = 0; + list_for_each_entry(pn, &acpi_dev->physical_node_list, node) { + /* Sanity check. */ if (pn->dev == dev) { dev_warn(dev, "Already associated with ACPI node\n"); goto err_free; } - - /* allocate physical node id according to physical_node_id_bitmap */ - physical_node->node_id = - find_first_zero_bit(acpi_dev->physical_node_id_bitmap, - ACPI_MAX_PHYSICAL_NODE); - if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) { - retval = -ENOSPC; - goto err_free; + if (pn->node_id == node_id) { + physnode_list = &pn->node; + node_id++; + } } - set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap); + physical_node->node_id = node_id; physical_node->dev = dev; - list_add_tail(&physical_node->node, &acpi_dev->physical_node_list); + list_add(&physical_node->node, physnode_list); acpi_dev->physical_node_count++; mutex_unlock(&acpi_dev->physical_node_lock); @@ -208,7 +213,7 @@ int acpi_unbind_one(struct device *dev) mutex_lock(&acpi_dev->physical_node_lock); list_for_each_safe(node, next, &acpi_dev->physical_node_list) { - char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2]; + char physical_node_name[PHYSICAL_NODE_NAME_SIZE]; entry = list_entry(node, struct acpi_device_physical_node, node); @@ -216,7 +221,6 @@ int acpi_unbind_one(struct device *dev) continue; list_del(node); - clear_bit(entry->node_id, acpi_dev->physical_node_id_bitmap); acpi_dev->physical_node_count--; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 56e6b68c8d2f..5026aaa35133 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -274,15 +274,12 @@ struct acpi_device_wakeup { }; struct acpi_device_physical_node { - u8 node_id; + unsigned int node_id; struct list_head node; struct device *dev; bool put_online:1; }; -/* set maximum of physical nodes to 32 for expansibility */ -#define ACPI_MAX_PHYSICAL_NODE 32 - /* Device */ struct acpi_device { int device_type; @@ -302,10 +299,9 @@ struct acpi_device { struct acpi_driver *driver; void *driver_data; struct device dev; - u8 physical_node_count; + unsigned int physical_node_count; struct list_head physical_node_list; struct mutex physical_node_lock; - DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE); struct list_head power_dependent; void (*remove)(struct acpi_device *); }; -- cgit v1.2.3 From 109a51598869a39fdcec2d49672a9a39b6d89481 Mon Sep 17 00:00:00 2001 From: Michal Srb Date: Tue, 6 Aug 2013 15:26:50 +0200 Subject: drm/cirrus: Invalidate page tables when pinning a BO This is a cirrus version of Egbert Eich's patch for mgag200. Without bo.bdev->dev_mapping set, the ttm_bo_unmap_virtual_locked called from ttm_bo_handle_move_mem returns with no effect. If any application accessed the memory before it was moved, it will access wrong memory next time. This causes crashes when changing resolution down. Signed-off-by: Michal Srb Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/cirrus/cirrus_ttm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/cirrus/cirrus_ttm.c b/drivers/gpu/drm/cirrus/cirrus_ttm.c index 0047012045c2..69fd8f1ac8df 100644 --- a/drivers/gpu/drm/cirrus/cirrus_ttm.c +++ b/drivers/gpu/drm/cirrus/cirrus_ttm.c @@ -328,6 +328,7 @@ int cirrus_bo_create(struct drm_device *dev, int size, int align, cirrusbo->gem.driver_private = NULL; cirrusbo->bo.bdev = &cirrus->ttm.bdev; + cirrusbo->bo.bdev->dev_mapping = dev->dev_mapping; cirrus_ttm_placement(cirrusbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM); -- cgit v1.2.3 From ecaac1c866bcda4780a963b3d18cd310d971aea3 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 17 Jul 2013 17:40:56 +0200 Subject: drm/mgag200: Invalidate page tables when pinning a BO When a BO gets pinned the placement may get changed. If the memory is mapped into user space and user space has already accessed the mapped range the page tables are set up but now point to the wrong memory. Set bo.mdev->dev_mapping in mgag200_bo_create() to make sure that ttm_bo_unmap_virtual() called from ttm_bo_handle_move_mem() will take care of this. v2: Don't call ttm_bo_unmap_virtual() in mgag200_bo_pin(), fix comment. Signed-off-by: Egbert Eich Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_ttm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/mgag200/mgag200_ttm.c b/drivers/gpu/drm/mgag200/mgag200_ttm.c index 13878d5de063..d70e4a92773b 100644 --- a/drivers/gpu/drm/mgag200/mgag200_ttm.c +++ b/drivers/gpu/drm/mgag200/mgag200_ttm.c @@ -323,6 +323,7 @@ int mgag200_bo_create(struct drm_device *dev, int size, int align, mgabo->gem.driver_private = NULL; mgabo->bo.bdev = &mdev->ttm.bdev; + mgabo->bo.bdev->dev_mapping = dev->dev_mapping; mgag200_ttm_placement(mgabo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM); -- cgit v1.2.3 From 3ac65259328324de323dc006b52ff7c1a5b18d19 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 7 Aug 2013 10:01:56 +1000 Subject: drm/ast: invalidate page tables when pinning a BO same fix as cirrus and mgag200. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/ast/ast_ttm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c index 98d670825a1a..6e8887fe6c1b 100644 --- a/drivers/gpu/drm/ast/ast_ttm.c +++ b/drivers/gpu/drm/ast/ast_ttm.c @@ -323,6 +323,7 @@ int ast_bo_create(struct drm_device *dev, int size, int align, astbo->gem.driver_private = NULL; astbo->bo.bdev = &ast->ttm.bdev; + astbo->bo.bdev->dev_mapping = dev->dev_mapping; ast_ttm_placement(astbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM); -- cgit v1.2.3 From 0ce99f749b3834edeb500e17d6ad17e86b60ff83 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 26 Jul 2013 11:27:49 +0200 Subject: drm/i915: fix gen4 digital port hotplug definitions Apparently Bspec is wrong in this case here even for gm45. Note that Bspec is horribly misguided on i965g/gm, so we don't have any other data points besides that it seems to make machines work better. With this changes all the bits in PORT_HOTPLUG_STAT for the digital ports are ordered the same way. This seems to agree with what register dumps from the hpd storm handling code shows, where the LIVE bit and the short/long pulse STATUS bits light up at the same time with this enumeration (but no with the one from Bspec). Also tested on my gm45 which has two DP+ ports, and everything seems to still work as expected. References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html Cc: Egbert Eich Cc: Jan Niggemann Tested-by: Jan Niggemann [danvet: Add a big warning that Bspec seems to be wrong for these bits, suggested by Jani.] Acked-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f2326fc60ac9..6f514297c483 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1856,10 +1856,16 @@ #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define PORT_HOTPLUG_STAT (dev_priv->info->display_mmio_offset + 0x61114) -/* HDMI/DP bits are gen4+ */ -#define PORTB_HOTPLUG_LIVE_STATUS (1 << 29) +/* + * HDMI/DP bits are gen4+ + * + * WARNING: Bspec for hpd status bits on gen4 seems to be completely confused. + * Please check the detailed lore in the commit message for for experimental + * evidence. + */ +#define PORTD_HOTPLUG_LIVE_STATUS (1 << 29) #define PORTC_HOTPLUG_LIVE_STATUS (1 << 28) -#define PORTD_HOTPLUG_LIVE_STATUS (1 << 27) +#define PORTB_HOTPLUG_LIVE_STATUS (1 << 27) #define PORTD_HOTPLUG_INT_STATUS (3 << 21) #define PORTC_HOTPLUG_INT_STATUS (3 << 19) #define PORTB_HOTPLUG_INT_STATUS (3 << 17) -- cgit v1.2.3 From 9dbd8febb4dbc9199fcf340b882eb930e36b65b6 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 23 Jul 2013 10:48:11 -0300 Subject: drm/i915: update last_vblank when disabling the power well The DRM layer keeps track of our vblanks and it assumes our vblank counters only go back to zero when they overflow. The problem is that when we disable the power well our counters also go to zero, but it doesn't mean they did overflow. So on this patch we grab the lock and update last_vblank so the DRM layer won't think our counters overflowed. This patch fixes the following intel-gpu-tools test: ./kms_flip --run-subtest blocking-absolute-wf_vblank Regression introduced by the following commit: commit bf51d5e2cda5d36d98e4b46ac7fca9461e512c41 Author: Paulo Zanoni Date: Wed Jul 3 17:12:13 2013 -0300 drm/i915: switch disable_power_well default value to 1 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66808 Signed-off-by: Paulo Zanoni [danvet: Added a comment that this might be better done in drm_vblank_post_modeset in general.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index f895d1508df8..b0e4a0bd1313 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5063,8 +5063,26 @@ static void __intel_set_power_well(struct drm_device *dev, bool enable) } } else { if (enable_requested) { + unsigned long irqflags; + enum pipe p; + I915_WRITE(HSW_PWR_WELL_DRIVER, 0); + POSTING_READ(HSW_PWR_WELL_DRIVER); DRM_DEBUG_KMS("Requesting to disable the power well\n"); + + /* + * After this, the registers on the pipes that are part + * of the power well will become zero, so we have to + * adjust our counters according to that. + * + * FIXME: Should we do this in general in + * drm_vblank_post_modeset? + */ + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for_each_pipe(p) + if (p != PIPE_A) + dev->last_vblank[p] = 0; + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); } } } -- cgit v1.2.3 From 22505b82a2800bddb67908522833bef96dd15845 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Fri, 2 Aug 2013 09:16:03 +0800 Subject: drm/i915: avoid brightness overflow when doing scale Some card's max brightness level is pretty large, e.g. on Acer Aspire 4732Z, the max level is 989910. If user space set a large enough level then the current scale done in intel_panel_set_backlight will cause an integer overflow and the scaled level will be mistakenly small, leaving user with an almost black screen. This patch fixes this problem. Signed-off-by: Aaron Lu [danvet: Add a comment to explain what's going on.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 67e2c1f1c9a8..5063eadac3ef 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -497,8 +497,11 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level, u32 max) goto out; } - /* scale to hardware */ - level = level * freq / max; + /* scale to hardware, but be careful to not overflow */ + if (freq < max) + level = level * freq / max; + else + level = freq / max * level; dev_priv->backlight.level = level; if (dev_priv->backlight.device) -- cgit v1.2.3 From 3eaba51cd399f5362a9fd9ebd5fb8b625b454271 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 5 Aug 2013 17:57:48 +0300 Subject: drm/i915: Don't call encoder's get_config unless encoder is active The SDVO code tries to compare the encoder's and crtc's idea of the pixel_multiplier. Normally they have to match, but when transitioning to DPMS off, we turn off the pipe before reading out the pipe_config, so the pixel_multiplier in the pipe_config will be 0, whereas the encoder will still have its pixel_multiplier set to whatever value we were using when the display was active. This leads to a warning from intel_modeset_check_state(). WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160() SDVO pixel multiplier mismatch, port: 0, encoder: 1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19 Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc Call Trace: [] dump_stack+0x41/0x56 [] warn_slowpath_common+0x7a/0xa0 [] warn_slowpath_fmt+0x2e/0x30 [] intel_sdvo_get_config+0x158/0x160 [] check_crtc_state+0x1e0/0xb10 [] intel_modeset_check_state+0x29d/0x7c0 [] intel_sdvo_dpms+0x5c/0xa0 [] drm_mode_obj_set_property_ioctl+0x40e/0x420 [] drm_mode_connector_property_set_ioctl+0x35/0x40 [] drm_ioctl+0x3e4/0x540 [] do_vfs_ioctl+0x72/0x570 [] SyS_ioctl+0x8f/0xa0 [] sysenter_do_call+0x12/0x22 ---[ end trace 7ce940aff1366d60 ]--- Fix the problem by skipping the encoder get_config() function for inactive encoders. Tested-by: Linus Torvalds Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5fb305840db8..e38b45786653 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8269,9 +8269,11 @@ check_crtc_state(struct drm_device *dev) list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + enum pipe pipe; if (encoder->base.crtc != &crtc->base) continue; - if (encoder->get_config) + if (encoder->get_config && + encoder->get_hw_state(encoder, &pipe)) encoder->get_config(encoder, &pipe_config); } -- cgit v1.2.3 From 3f577573cd5482a32f85bd131e52f7cb4b9ac518 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 25 Jul 2013 14:31:30 +0300 Subject: drm/i915: do not disable backlight on vgaswitcheroo switch off On muxed systems, the other vgaswitcheroo client may depend on i915 to handle the backlight. We began switching off the backlight since commit a261b246ebd552fd5d5a8ed84cc931bb821c427f Author: Daniel Vetter Date: Thu Jul 26 19:21:47 2012 +0200 drm/i915: disable all crtcs at suspend time breaking backlight on discreet graphics in (some) muxed systems. Keep the backlight on when the state is changed through vgaswitcheroo. Note: The alternative would be to add a quirk table to achieve the same based on system identifiers, but AFAICS it would asymptotically approach effectively the same as this patch as more IDs are added, but with the maintenance burden of the quirk table. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55311 Tested-by: Fede Tested-by: Aximab Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59785 Tested-by: sfievet Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 5063eadac3ef..5950888ae1d0 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -518,6 +518,17 @@ void intel_panel_disable_backlight(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; unsigned long flags; + /* + * Do not disable backlight on the vgaswitcheroo path. When switching + * away from i915, the other client may depend on i915 to handle the + * backlight. This will leave the backlight on unnecessarily when + * another client is not activated. + */ + if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) { + DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n"); + return; + } + spin_lock_irqsave(&dev_priv->backlight.lock, flags); dev_priv->backlight.enabled = false; -- cgit v1.2.3 From 1e385f6f97b8ab39e16a0956a1951e19a9376bab Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Tue, 6 Aug 2013 19:11:11 +0900 Subject: ACPI / processor: move try_offline_node() after acpi_unmap_lsapic() try_offline_node() checks that all CPUs associated with the given node have been removed by using cpu_present_bits. If all cpus related to that node have been removed, try_offline_node() clears the node information. However, try_offline_node() called from acpi_processor_remove() never clears the node information. For disabling cpu_present_bits, acpi_unmap_lsapic() needs be called. Yet, acpi_unmap_lsapic() is called after try_offline_node() has run. So when try_offline_node() runs, the CPU's cpu_present_bits is always set. Fix the issue by moving try_offline_node() after acpi_unmap_lsapic(). The problem fixed here was uncovered by commit cecdb19 "ACPI / scan: Change the implementation of acpi_bus_trim()". [rjw: Changelog] Signed-off-by: Yasuaki Ishimatsu Acked-by: Toshi Kani Cc: 3.9+ # 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_processor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index fd6c51cc3acb..5a74a9c1e42c 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -451,7 +451,6 @@ static void acpi_processor_remove(struct acpi_device *device) /* Clean up. */ per_cpu(processor_device_array, pr->id) = NULL; per_cpu(processors, pr->id) = NULL; - try_offline_node(cpu_to_node(pr->id)); /* Remove the CPU. */ get_online_cpus(); @@ -459,6 +458,8 @@ static void acpi_processor_remove(struct acpi_device *device) acpi_unmap_lsapic(pr->id); put_online_cpus(); + try_offline_node(cpu_to_node(pr->id)); + out: free_cpumask_var(pr->throttling.shared_cpu_map); kfree(pr); -- cgit v1.2.3 From f54fe64d14dff3df6d45a48115d248a82557811f Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 5 Aug 2013 21:27:12 +0300 Subject: cpufreq: loongson2: fix regression related to clock management Commit 42913c799 (MIPS: Loongson2: Use clk API instead of direct dereferences) broke the cpufreq functionality on Loongson2 boards: clk_set_rate() is called before the CPU frequency table is initialized, and therefore will always fail. Fix by moving the clk_set_rate() after the table initialization. Tested on Lemote FuLoong mini-PC. Signed-off-by: Aaro Koskinen Acked-by: Viresh Kumar Cc: 3.9+ # 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/loongson2_cpufreq.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index bb838b985077..9536852c504a 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -118,11 +118,6 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) clk_put(cpuclk); return -EINVAL; } - ret = clk_set_rate(cpuclk, rate); - if (ret) { - clk_put(cpuclk); - return ret; - } /* clock table init */ for (i = 2; @@ -130,6 +125,12 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) i++) loongson2_clockmod_table[i].frequency = (rate * i) / 8; + ret = clk_set_rate(cpuclk, rate); + if (ret) { + clk_put(cpuclk); + return ret; + } + policy->cur = loongson2_cpufreq_get(policy->cpu); cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], -- cgit v1.2.3 From 6c4640c3adfd97ce10efed7c07405f52d002b9a8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 5 Aug 2013 12:28:02 +0530 Subject: cpufreq: rename ignore_nice as ignore_nice_load This sysfs file was called ignore_nice_load earlier and commit 4d5dcc4 (cpufreq: governor: Implement per policy instances of governors) changed its name to ignore_nice by mistake. Lets get it renamed back to its original name. Reported-by: Martin von Gagern Signed-off-by: Viresh Kumar Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_conservative.c | 20 ++++++++++---------- drivers/cpufreq/cpufreq_governor.c | 8 ++++---- drivers/cpufreq/cpufreq_governor.h | 4 ++-- drivers/cpufreq/cpufreq_ondemand.c | 20 ++++++++++---------- 4 files changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 0ceb2eff5a7e..f97cb3d8c5a2 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -221,8 +221,8 @@ static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf, return count; } -static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, + const char *buf, size_t count) { struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; unsigned int input, j; @@ -235,10 +235,10 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, if (input > 1) input = 1; - if (input == cs_tuners->ignore_nice) /* nothing to do */ + if (input == cs_tuners->ignore_nice_load) /* nothing to do */ return count; - cs_tuners->ignore_nice = input; + cs_tuners->ignore_nice_load = input; /* we need to re-evaluate prev_cpu_idle */ for_each_online_cpu(j) { @@ -246,7 +246,7 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, dbs_info = &per_cpu(cs_cpu_dbs_info, j); dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, &dbs_info->cdbs.prev_cpu_wall, 0); - if (cs_tuners->ignore_nice) + if (cs_tuners->ignore_nice_load) dbs_info->cdbs.prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; } @@ -279,7 +279,7 @@ show_store_one(cs, sampling_rate); show_store_one(cs, sampling_down_factor); show_store_one(cs, up_threshold); show_store_one(cs, down_threshold); -show_store_one(cs, ignore_nice); +show_store_one(cs, ignore_nice_load); show_store_one(cs, freq_step); declare_show_sampling_rate_min(cs); @@ -287,7 +287,7 @@ gov_sys_pol_attr_rw(sampling_rate); gov_sys_pol_attr_rw(sampling_down_factor); gov_sys_pol_attr_rw(up_threshold); gov_sys_pol_attr_rw(down_threshold); -gov_sys_pol_attr_rw(ignore_nice); +gov_sys_pol_attr_rw(ignore_nice_load); gov_sys_pol_attr_rw(freq_step); gov_sys_pol_attr_ro(sampling_rate_min); @@ -297,7 +297,7 @@ static struct attribute *dbs_attributes_gov_sys[] = { &sampling_down_factor_gov_sys.attr, &up_threshold_gov_sys.attr, &down_threshold_gov_sys.attr, - &ignore_nice_gov_sys.attr, + &ignore_nice_load_gov_sys.attr, &freq_step_gov_sys.attr, NULL }; @@ -313,7 +313,7 @@ static struct attribute *dbs_attributes_gov_pol[] = { &sampling_down_factor_gov_pol.attr, &up_threshold_gov_pol.attr, &down_threshold_gov_pol.attr, - &ignore_nice_gov_pol.attr, + &ignore_nice_load_gov_pol.attr, &freq_step_gov_pol.attr, NULL }; @@ -338,7 +338,7 @@ static int cs_init(struct dbs_data *dbs_data) tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD; tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; - tuners->ignore_nice = 0; + tuners->ignore_nice_load = 0; tuners->freq_step = DEF_FREQUENCY_STEP; dbs_data->tuners = tuners; diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 7b839a8db2a7..e59afaa9da23 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -47,9 +47,9 @@ void dbs_check_cpu(struct dbs_data *dbs_data, int cpu) unsigned int j; if (dbs_data->cdata->governor == GOV_ONDEMAND) - ignore_nice = od_tuners->ignore_nice; + ignore_nice = od_tuners->ignore_nice_load; else - ignore_nice = cs_tuners->ignore_nice; + ignore_nice = cs_tuners->ignore_nice_load; policy = cdbs->cur_policy; @@ -298,12 +298,12 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, cs_tuners = dbs_data->tuners; cs_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu); sampling_rate = cs_tuners->sampling_rate; - ignore_nice = cs_tuners->ignore_nice; + ignore_nice = cs_tuners->ignore_nice_load; } else { od_tuners = dbs_data->tuners; od_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu); sampling_rate = od_tuners->sampling_rate; - ignore_nice = od_tuners->ignore_nice; + ignore_nice = od_tuners->ignore_nice_load; od_ops = dbs_data->cdata->gov_ops; io_busy = od_tuners->io_is_busy; } diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 6663ec3b3056..d5f12b4b11b8 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -165,7 +165,7 @@ struct cs_cpu_dbs_info_s { /* Per policy Governers sysfs tunables */ struct od_dbs_tuners { - unsigned int ignore_nice; + unsigned int ignore_nice_load; unsigned int sampling_rate; unsigned int sampling_down_factor; unsigned int up_threshold; @@ -175,7 +175,7 @@ struct od_dbs_tuners { }; struct cs_dbs_tuners { - unsigned int ignore_nice; + unsigned int ignore_nice_load; unsigned int sampling_rate; unsigned int sampling_down_factor; unsigned int up_threshold; diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 93eb5cbcc1f6..c087347d6688 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -403,8 +403,8 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data, return count; } -static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, - size_t count) +static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data, + const char *buf, size_t count) { struct od_dbs_tuners *od_tuners = dbs_data->tuners; unsigned int input; @@ -419,10 +419,10 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, if (input > 1) input = 1; - if (input == od_tuners->ignore_nice) { /* nothing to do */ + if (input == od_tuners->ignore_nice_load) { /* nothing to do */ return count; } - od_tuners->ignore_nice = input; + od_tuners->ignore_nice_load = input; /* we need to re-evaluate prev_cpu_idle */ for_each_online_cpu(j) { @@ -430,7 +430,7 @@ static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf, dbs_info = &per_cpu(od_cpu_dbs_info, j); dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, &dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy); - if (od_tuners->ignore_nice) + if (od_tuners->ignore_nice_load) dbs_info->cdbs.prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; @@ -461,7 +461,7 @@ show_store_one(od, sampling_rate); show_store_one(od, io_is_busy); show_store_one(od, up_threshold); show_store_one(od, sampling_down_factor); -show_store_one(od, ignore_nice); +show_store_one(od, ignore_nice_load); show_store_one(od, powersave_bias); declare_show_sampling_rate_min(od); @@ -469,7 +469,7 @@ gov_sys_pol_attr_rw(sampling_rate); gov_sys_pol_attr_rw(io_is_busy); gov_sys_pol_attr_rw(up_threshold); gov_sys_pol_attr_rw(sampling_down_factor); -gov_sys_pol_attr_rw(ignore_nice); +gov_sys_pol_attr_rw(ignore_nice_load); gov_sys_pol_attr_rw(powersave_bias); gov_sys_pol_attr_ro(sampling_rate_min); @@ -478,7 +478,7 @@ static struct attribute *dbs_attributes_gov_sys[] = { &sampling_rate_gov_sys.attr, &up_threshold_gov_sys.attr, &sampling_down_factor_gov_sys.attr, - &ignore_nice_gov_sys.attr, + &ignore_nice_load_gov_sys.attr, &powersave_bias_gov_sys.attr, &io_is_busy_gov_sys.attr, NULL @@ -494,7 +494,7 @@ static struct attribute *dbs_attributes_gov_pol[] = { &sampling_rate_gov_pol.attr, &up_threshold_gov_pol.attr, &sampling_down_factor_gov_pol.attr, - &ignore_nice_gov_pol.attr, + &ignore_nice_load_gov_pol.attr, &powersave_bias_gov_pol.attr, &io_is_busy_gov_pol.attr, NULL @@ -544,7 +544,7 @@ static int od_init(struct dbs_data *dbs_data) } tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; - tuners->ignore_nice = 0; + tuners->ignore_nice_load = 0; tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy = should_io_be_busy(); -- cgit v1.2.3 From 60f75b8e97daf4a39790a20d962cb861b9220af5 Mon Sep 17 00:00:00 2001 From: Rafael J. Wysocki Date: Wed, 7 Aug 2013 22:55:00 +0200 Subject: ACPI: Try harder to resolve _ADR collisions for bridges In theory, under a given ACPI namespace node there should be only one child device object with _ADR whose value matches a given bus address exactly. In practice, however, there are systems in which multiple child device objects under a given parent have _ADR matching exactly the same address. In those cases we use _STA to determine which of the multiple matching devices is enabled, since some systems are known to indicate which ACPI device object to associate with the given physical (usually PCI) device this way. Unfortunately, as it turns out, there are systems in which many device objects under the same parent have _ADR matching exactly the same bus address and none of them has _STA, in which case they all should be regarded as enabled according to the spec. Still, if those device objects are supposed to represent bridges (e.g. this is the case for device objects corresponding to PCIe ports), we can try harder and skip the ones that have no child device objects in the ACPI namespace. With luck, we can avoid using device objects that we are not expected to use this way. Although this only works for bridges whose children also have ACPI namespace representation, it is sufficient to address graphics adapter detection issues on some systems, so rework the code finding a matching device ACPI handle for a given bus address to implement this idea. Introduce a new function, acpi_find_child(), taking three arguments: the ACPI handle of the device's parent, a bus address suitable for the device's bus type and a bool indicating if the device is a bridge and make it work as outlined above. Reimplement the function currently used for this purpose, acpi_get_child(), as a call to acpi_find_child() with the last argument set to 'false' and make the PCI subsystem use acpi_find_child() with the bridge information passed as the last argument to it. [Lan Tianyu notices that it is not sufficient to use pci_is_bridge() for that, because the device's subordinate pointer hasn't been set yet at this point, so use hdr_type instead.] This change fixes a regression introduced inadvertently by commit 33f767d (ACPI: Rework acpi_get_child() to be more efficient) which overlooked the fact that for acpi_walk_namespace() "post-order" means "after all children have been visited" rather than "on the way back", so for device objects without children and for namespace walks of depth 1, as in the acpi_get_child() case, the "post-order" callbacks ordering is actually the same as the ordering of "pre-order" ones. Since that commit changed the namespace walk in acpi_get_child() to terminate after finding the first matching object instead of going through all of them and returning the last one, it effectively changed the result returned by that function in some rare cases and that led to problems (the switch from a "pre-order" to a "post-order" callback was supposed to prevent that from happening, but it was ineffective). As it turns out, the systems where the change made by commit 33f767d actually matters are those where there are multiple ACPI device objects representing the same PCIe port (which effectively is a bridge). Moreover, only one of them, and the one we are expected to use, has child device objects in the ACPI namespace, so the regression can be addressed as described above. References: https://bugzilla.kernel.org/show_bug.cgi?id=60561 Reported-by: Peter Wu Tested-by: Vladimir Lalov Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas Cc: 3.9+ # 3.9+ --- drivers/acpi/glue.c | 99 ++++++++++++++++++++++++++++++++++++++++--------- drivers/pci/pci-acpi.c | 15 ++++++-- include/acpi/acpi_bus.h | 6 ++- 3 files changed, 98 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 17e15d11bd39..408f6b2a5fa8 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -79,34 +79,99 @@ static struct acpi_bus_type *acpi_get_bus_type(struct device *dev) return ret; } -static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used, - void *addr_p, void **ret_p) +static acpi_status acpi_dev_present(acpi_handle handle, u32 lvl_not_used, + void *not_used, void **ret_p) { - unsigned long long addr, sta; - acpi_status status; + struct acpi_device *adev = NULL; - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr); - if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) { + acpi_bus_get_device(handle, &adev); + if (adev) { *ret_p = handle; - status = acpi_bus_get_status_handle(handle, &sta); - if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_ENABLED)) - return AE_CTRL_TERMINATE; + return AE_CTRL_TERMINATE; } return AE_OK; } -acpi_handle acpi_get_child(acpi_handle parent, u64 address) +static bool acpi_extra_checks_passed(acpi_handle handle, bool is_bridge) { - void *ret = NULL; + unsigned long long sta; + acpi_status status; + + status = acpi_bus_get_status_handle(handle, &sta); + if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_ENABLED)) + return false; + + if (is_bridge) { + void *test = NULL; + + /* Check if this object has at least one child device. */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + acpi_dev_present, NULL, NULL, &test); + return !!test; + } + return true; +} + +struct find_child_context { + u64 addr; + bool is_bridge; + acpi_handle ret; + bool ret_checked; +}; + +static acpi_status do_find_child(acpi_handle handle, u32 lvl_not_used, + void *data, void **not_used) +{ + struct find_child_context *context = data; + unsigned long long addr; + acpi_status status; - if (!parent) - return NULL; + status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr); + if (ACPI_FAILURE(status) || addr != context->addr) + return AE_OK; - acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, NULL, - do_acpi_find_child, &address, &ret); - return (acpi_handle)ret; + if (!context->ret) { + /* This is the first matching object. Save its handle. */ + context->ret = handle; + return AE_OK; + } + /* + * There is more than one matching object with the same _ADR value. + * That really is unexpected, so we are kind of beyond the scope of the + * spec here. We have to choose which one to return, though. + * + * First, check if the previously found object is good enough and return + * its handle if so. Second, check the same for the object that we've + * just found. + */ + if (!context->ret_checked) { + if (acpi_extra_checks_passed(context->ret, context->is_bridge)) + return AE_CTRL_TERMINATE; + else + context->ret_checked = true; + } + if (acpi_extra_checks_passed(handle, context->is_bridge)) { + context->ret = handle; + return AE_CTRL_TERMINATE; + } + return AE_OK; +} + +acpi_handle acpi_find_child(acpi_handle parent, u64 addr, bool is_bridge) +{ + if (parent) { + struct find_child_context context = { + .addr = addr, + .is_bridge = is_bridge, + }; + + acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, do_find_child, + NULL, &context, NULL); + return context.ret; + } + return NULL; } -EXPORT_SYMBOL(acpi_get_child); +EXPORT_SYMBOL_GPL(acpi_find_child); int acpi_bind_one(struct device *dev, acpi_handle handle) { diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dbdc5f7e2b29..01e264fb50e0 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -317,13 +317,20 @@ void acpi_pci_remove_bus(struct pci_bus *bus) /* ACPI bus type */ static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) { - struct pci_dev * pci_dev; - u64 addr; + struct pci_dev *pci_dev = to_pci_dev(dev); + bool is_bridge; + u64 addr; - pci_dev = to_pci_dev(dev); + /* + * pci_is_bridge() is not suitable here, because pci_dev->subordinate + * is set only after acpi_pci_find_device() has been called for the + * given device. + */ + is_bridge = pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE + || pci_dev->hdr_type == PCI_HEADER_TYPE_CARDBUS; /* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); - *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); + *handle = acpi_find_child(ACPI_HANDLE(dev->parent), addr, is_bridge); if (!*handle) return -ENODEV; return 0; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 5026aaa35133..94383a70c1a3 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -441,7 +441,11 @@ struct acpi_pci_root { }; /* helper */ -acpi_handle acpi_get_child(acpi_handle, u64); +acpi_handle acpi_find_child(acpi_handle, u64, bool); +static inline acpi_handle acpi_get_child(acpi_handle handle, u64 addr) +{ + return acpi_find_child(handle, addr, false); +} int acpi_is_root_bridge(acpi_handle); struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev)) -- cgit v1.2.3 From 95f595097b22827a5ee562afff402570c6b8205a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Jul 2013 09:16:42 -0400 Subject: drm/radeon: properly handle pm on gpu reset When we reset the GPU, we need to properly tear down power management before reseting the GPU and then set it back up again after reset. Add the missing radeon_pm_[suspend|resume] calls to the gpu reset function. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 82335e38ec4f..84dd2dcbcf69 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1519,6 +1519,7 @@ int radeon_gpu_reset(struct radeon_device *rdev) radeon_save_bios_scratch_regs(rdev); /* block TTM */ resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev); + radeon_pm_suspend(rdev); radeon_suspend(rdev); for (i = 0; i < RADEON_NUM_RINGS; ++i) { @@ -1564,6 +1565,7 @@ retry: } } + radeon_pm_resume(rdev); drm_helper_resume_force_mode(rdev->ddev); ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched); -- cgit v1.2.3 From e1accbf0543eecfdb161131208c3dfefee22d61f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 29 Jul 2013 18:56:13 -0400 Subject: drm/radeon: select audio dto based on encoder id for DCE3 There are two audio dtos on radeon asics that you can select between. Normally, dto0 is used for hdmi and dto1 for DP, but it seems that the dto is somehow tied to the encoders on DCE3 asics. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67435 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_hdmi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index f48240bb8c56..b9b1139da356 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -242,9 +242,15 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* according to the reg specs, this should DCE3.2 only, but in * practice it seems to cover DCE3.0 as well. */ - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); - WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); - WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ + if (dig->dig_encoder == 0) { + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); + WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ + } else { + WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100); + WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ + } } else { /* according to the reg specs, this should be DCE2.0 and DCE3.0 */ WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | -- cgit v1.2.3 From fda837241f3680e5dc554c26e178c2deec7a039c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Jul 2013 12:41:35 -0400 Subject: drm/radeon/dpm: adjust thermal protection requirements On rv770 and newer, clock gating is not required for thermal protection. The only requirement is that the design utilizes a thermal sensor. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/btc_dpm.c | 3 +-- drivers/gpu/drm/radeon/cypress_dpm.c | 3 +-- drivers/gpu/drm/radeon/ni_dpm.c | 3 +-- drivers/gpu/drm/radeon/rv770_dpm.c | 3 +-- drivers/gpu/drm/radeon/si_dpm.c | 3 +-- 5 files changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c index 0bfd55e08820..e7c128b48112 100644 --- a/drivers/gpu/drm/radeon/btc_dpm.c +++ b/drivers/gpu/drm/radeon/btc_dpm.c @@ -2659,8 +2659,7 @@ int btc_dpm_init(struct radeon_device *rdev) pi->dynamic_pcie_gen2 = true; - if (pi->gfx_clock_gating && - (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)) + if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE) pi->thermal_protection = true; else pi->thermal_protection = false; diff --git a/drivers/gpu/drm/radeon/cypress_dpm.c b/drivers/gpu/drm/radeon/cypress_dpm.c index 9bcdd174780f..c840e079be5b 100644 --- a/drivers/gpu/drm/radeon/cypress_dpm.c +++ b/drivers/gpu/drm/radeon/cypress_dpm.c @@ -2122,8 +2122,7 @@ int cypress_dpm_init(struct radeon_device *rdev) pi->dynamic_pcie_gen2 = true; - if (pi->gfx_clock_gating && - (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)) + if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE) pi->thermal_protection = true; else pi->thermal_protection = false; diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index 4f9b9bc20daa..c560318d3f19 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -4188,8 +4188,7 @@ int ni_dpm_init(struct radeon_device *rdev) pi->dynamic_pcie_gen2 = true; - if (pi->gfx_clock_gating && - (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)) + if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE) pi->thermal_protection = true; else pi->thermal_protection = false; diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c index 2d347925f77d..2ae54bba14d4 100644 --- a/drivers/gpu/drm/radeon/rv770_dpm.c +++ b/drivers/gpu/drm/radeon/rv770_dpm.c @@ -2393,8 +2393,7 @@ int rv770_dpm_init(struct radeon_device *rdev) pi->dynamic_pcie_gen2 = true; - if (pi->gfx_clock_gating && - (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)) + if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE) pi->thermal_protection = true; else pi->thermal_protection = false; diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 41825575b403..dc06e433048a 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -6366,8 +6366,7 @@ int si_dpm_init(struct radeon_device *rdev) eg_pi->sclk_deep_sleep = true; si_pi->sclk_deep_sleep_above_low = false; - if (pi->gfx_clock_gating && - (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)) + if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE) pi->thermal_protection = true; else pi->thermal_protection = false; -- cgit v1.2.3 From b841ce7b41ffbecf84285b381b3ac23f05256d31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Jul 2013 18:32:33 -0400 Subject: drm/radeon/dpm: fix spread spectrum setup (v2) Need to check for engine and memory clock ss separately and only enable dynamic ss if either of them are found. This should fix systems which have a ss table, but do not have entries for engine or memory. On those systems we may enable dynamic spread spectrum without enabling it on the engine or memory clocks which can lead to a hang in some cases. fixes some systems reported here: https://bugs.freedesktop.org/show_bug.cgi?id=66963 v2: fix typo Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/btc_dpm.c | 14 +------------- drivers/gpu/drm/radeon/cypress_dpm.c | 14 +------------- drivers/gpu/drm/radeon/ni_dpm.c | 14 +------------- drivers/gpu/drm/radeon/rv6xx_dpm.c | 19 ++++++++----------- drivers/gpu/drm/radeon/rv770_dpm.c | 30 +++++++++++++++++------------- drivers/gpu/drm/radeon/rv770_dpm.h | 1 + drivers/gpu/drm/radeon/si_dpm.c | 14 +------------- 7 files changed, 30 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c index e7c128b48112..9953e1fbc46d 100644 --- a/drivers/gpu/drm/radeon/btc_dpm.c +++ b/drivers/gpu/drm/radeon/btc_dpm.c @@ -2548,9 +2548,6 @@ int btc_dpm_init(struct radeon_device *rdev) { struct rv7xx_power_info *pi; struct evergreen_power_info *eg_pi; - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - u16 data_offset, size; - u8 frev, crev; struct atom_clock_dividers dividers; int ret; @@ -2633,16 +2630,7 @@ int btc_dpm_init(struct radeon_device *rdev) eg_pi->vddci_control = radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0); - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; - pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; - pi->dynamic_ss = true; - } + rv770_get_engine_memory_ss(rdev); pi->asi = RV770_ASI_DFLT; pi->pasi = CYPRESS_HASI_DFLT; diff --git a/drivers/gpu/drm/radeon/cypress_dpm.c b/drivers/gpu/drm/radeon/cypress_dpm.c index c840e079be5b..7e5d0b570a30 100644 --- a/drivers/gpu/drm/radeon/cypress_dpm.c +++ b/drivers/gpu/drm/radeon/cypress_dpm.c @@ -2038,9 +2038,6 @@ int cypress_dpm_init(struct radeon_device *rdev) { struct rv7xx_power_info *pi; struct evergreen_power_info *eg_pi; - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - uint16_t data_offset, size; - uint8_t frev, crev; struct atom_clock_dividers dividers; int ret; @@ -2092,16 +2089,7 @@ int cypress_dpm_init(struct radeon_device *rdev) eg_pi->vddci_control = radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0); - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; - pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; - pi->dynamic_ss = true; - } + rv770_get_engine_memory_ss(rdev); pi->asi = RV770_ASI_DFLT; pi->pasi = CYPRESS_HASI_DFLT; diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index c560318d3f19..f0f5f748938a 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -4067,9 +4067,6 @@ int ni_dpm_init(struct radeon_device *rdev) struct rv7xx_power_info *pi; struct evergreen_power_info *eg_pi; struct ni_power_info *ni_pi; - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - u16 data_offset, size; - u8 frev, crev; struct atom_clock_dividers dividers; int ret; @@ -4162,16 +4159,7 @@ int ni_dpm_init(struct radeon_device *rdev) eg_pi->vddci_control = radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0); - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; - pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; - pi->dynamic_ss = true; - } + rv770_get_engine_memory_ss(rdev); pi->asi = RV770_ASI_DFLT; pi->pasi = CYPRESS_HASI_DFLT; diff --git a/drivers/gpu/drm/radeon/rv6xx_dpm.c b/drivers/gpu/drm/radeon/rv6xx_dpm.c index 363018c60412..e44a90a359a5 100644 --- a/drivers/gpu/drm/radeon/rv6xx_dpm.c +++ b/drivers/gpu/drm/radeon/rv6xx_dpm.c @@ -1944,9 +1944,7 @@ static int rv6xx_parse_power_table(struct radeon_device *rdev) int rv6xx_dpm_init(struct radeon_device *rdev) { - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - uint16_t data_offset, size; - uint8_t frev, crev; + struct radeon_atom_ss ss; struct atom_clock_dividers dividers; struct rv6xx_power_info *pi; int ret; @@ -1989,16 +1987,15 @@ int rv6xx_dpm_init(struct radeon_device *rdev) pi->gfx_clock_gating = true; - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; + pi->sclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, + ASIC_INTERNAL_ENGINE_SS, 0); + pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, + ASIC_INTERNAL_MEMORY_SS, 0); + + if (pi->sclk_ss || pi->mclk_ss) pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; + else pi->dynamic_ss = false; - } pi->dynamic_pcie_gen2 = true; diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c index 2ae54bba14d4..094c67a29d0d 100644 --- a/drivers/gpu/drm/radeon/rv770_dpm.c +++ b/drivers/gpu/drm/radeon/rv770_dpm.c @@ -2319,12 +2319,25 @@ int rv7xx_parse_power_table(struct radeon_device *rdev) return 0; } +void rv770_get_engine_memory_ss(struct radeon_device *rdev) +{ + struct rv7xx_power_info *pi = rv770_get_pi(rdev); + struct radeon_atom_ss ss; + + pi->sclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, + ASIC_INTERNAL_ENGINE_SS, 0); + pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, + ASIC_INTERNAL_MEMORY_SS, 0); + + if (pi->sclk_ss || pi->mclk_ss) + pi->dynamic_ss = true; + else + pi->dynamic_ss = false; +} + int rv770_dpm_init(struct radeon_device *rdev) { struct rv7xx_power_info *pi; - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - uint16_t data_offset, size; - uint8_t frev, crev; struct atom_clock_dividers dividers; int ret; @@ -2369,16 +2382,7 @@ int rv770_dpm_init(struct radeon_device *rdev) pi->mvdd_control = radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_MVDDC, 0); - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; - pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; - pi->dynamic_ss = false; - } + rv770_get_engine_memory_ss(rdev); pi->asi = RV770_ASI_DFLT; pi->pasi = RV770_HASI_DFLT; diff --git a/drivers/gpu/drm/radeon/rv770_dpm.h b/drivers/gpu/drm/radeon/rv770_dpm.h index 96b1b2a62a8a..9244effc6b59 100644 --- a/drivers/gpu/drm/radeon/rv770_dpm.h +++ b/drivers/gpu/drm/radeon/rv770_dpm.h @@ -275,6 +275,7 @@ void rv770_set_uvd_clock_before_set_eng_clock(struct radeon_device *rdev, void rv770_set_uvd_clock_after_set_eng_clock(struct radeon_device *rdev, struct radeon_ps *new_ps, struct radeon_ps *old_ps); +void rv770_get_engine_memory_ss(struct radeon_device *rdev); /* smc */ int rv770_read_smc_soft_register(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index dc06e433048a..71a993f1c8c4 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -6253,9 +6253,6 @@ int si_dpm_init(struct radeon_device *rdev) struct evergreen_power_info *eg_pi; struct ni_power_info *ni_pi; struct si_power_info *si_pi; - int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info); - u16 data_offset, size; - u8 frev, crev; struct atom_clock_dividers dividers; int ret; u32 mask; @@ -6346,16 +6343,7 @@ int si_dpm_init(struct radeon_device *rdev) si_pi->vddc_phase_shed_control = radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDC, VOLTAGE_OBJ_PHASE_LUT); - if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size, - &frev, &crev, &data_offset)) { - pi->sclk_ss = true; - pi->mclk_ss = true; - pi->dynamic_ss = true; - } else { - pi->sclk_ss = false; - pi->mclk_ss = false; - pi->dynamic_ss = true; - } + rv770_get_engine_memory_ss(rdev); pi->asi = RV770_ASI_DFLT; pi->pasi = CYPRESS_HASI_DFLT; -- cgit v1.2.3 From 797f203f622164a322b9a0f962ce431e3f6ca48e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Aug 2013 11:54:07 -0400 Subject: drm/radeon/dpm: adjust power state properly for UVD on SI There are some hardware issue with reclocking on SI when UVD is active, so use a stable power state when UVD is active. Fixes possible hangs and performance issues when using UVD on SI. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 44 ++++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 71a993f1c8c4..88699e3cd868 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2903,7 +2903,8 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, { struct ni_ps *ps = ni_get_ps(rps); struct radeon_clock_and_voltage_limits *max_limits; - bool disable_mclk_switching; + bool disable_mclk_switching = false; + bool disable_sclk_switching = false; u32 mclk, sclk; u16 vddc, vddci; int i; @@ -2911,8 +2912,11 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, if ((rdev->pm.dpm.new_active_crtc_count > 1) || ni_dpm_vblank_too_short(rdev)) disable_mclk_switching = true; - else - disable_mclk_switching = false; + + if (rps->vclk || rps->dclk) { + disable_mclk_switching = true; + disable_sclk_switching = true; + } if (rdev->pm.dpm.ac_power) max_limits = &rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac; @@ -2940,27 +2944,43 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, if (disable_mclk_switching) { mclk = ps->performance_levels[ps->performance_level_count - 1].mclk; - sclk = ps->performance_levels[0].sclk; - vddc = ps->performance_levels[0].vddc; vddci = ps->performance_levels[ps->performance_level_count - 1].vddci; } else { - sclk = ps->performance_levels[0].sclk; mclk = ps->performance_levels[0].mclk; - vddc = ps->performance_levels[0].vddc; vddci = ps->performance_levels[0].vddci; } + if (disable_sclk_switching) { + sclk = ps->performance_levels[ps->performance_level_count - 1].sclk; + vddc = ps->performance_levels[ps->performance_level_count - 1].vddc; + } else { + sclk = ps->performance_levels[0].sclk; + vddc = ps->performance_levels[0].vddc; + } + /* adjusted low state */ ps->performance_levels[0].sclk = sclk; ps->performance_levels[0].mclk = mclk; ps->performance_levels[0].vddc = vddc; ps->performance_levels[0].vddci = vddci; - for (i = 1; i < ps->performance_level_count; i++) { - if (ps->performance_levels[i].sclk < ps->performance_levels[i - 1].sclk) - ps->performance_levels[i].sclk = ps->performance_levels[i - 1].sclk; - if (ps->performance_levels[i].vddc < ps->performance_levels[i - 1].vddc) - ps->performance_levels[i].vddc = ps->performance_levels[i - 1].vddc; + if (disable_sclk_switching) { + sclk = ps->performance_levels[0].sclk; + for (i = 1; i < ps->performance_level_count; i++) { + if (sclk < ps->performance_levels[i].sclk) + sclk = ps->performance_levels[i].sclk; + } + for (i = 0; i < ps->performance_level_count; i++) { + ps->performance_levels[i].sclk = sclk; + ps->performance_levels[i].vddc = vddc; + } + } else { + for (i = 1; i < ps->performance_level_count; i++) { + if (ps->performance_levels[i].sclk < ps->performance_levels[i - 1].sclk) + ps->performance_levels[i].sclk = ps->performance_levels[i - 1].sclk; + if (ps->performance_levels[i].vddc < ps->performance_levels[i - 1].vddc) + ps->performance_levels[i].vddc = ps->performance_levels[i - 1].vddc; + } } if (disable_mclk_switching) { -- cgit v1.2.3 From 2858c00d2823c83acce2a1175dbabb2cebee8678 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 1 Aug 2013 17:34:07 +0200 Subject: drm/radeon: fix halting UVD Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 3 ++- drivers/gpu/drm/radeon/evergreen.c | 3 ++- drivers/gpu/drm/radeon/ni.c | 3 ++- drivers/gpu/drm/radeon/r600.c | 28 +++++++++++++++++++++++----- drivers/gpu/drm/radeon/radeon_asic.h | 2 +- drivers/gpu/drm/radeon/rv770.c | 2 ++ drivers/gpu/drm/radeon/si.c | 6 ++++-- 7 files changed, 36 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 6dacec4e2090..524db70aaf6e 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -6194,7 +6194,7 @@ int cik_suspend(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); cik_cp_enable(rdev, false); cik_sdma_enable(rdev, false); - r600_uvd_rbc_stop(rdev); + r600_uvd_stop(rdev); radeon_uvd_suspend(rdev); cik_irq_suspend(rdev); radeon_wb_disable(rdev); @@ -6358,6 +6358,7 @@ void cik_fini(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_fini(rdev); cik_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 038dcac7670c..5b98e573d60a 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -5291,10 +5291,10 @@ int evergreen_resume(struct radeon_device *rdev) int evergreen_suspend(struct radeon_device *rdev) { r600_audio_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_suspend(rdev); r700_cp_stop(rdev); r600_dma_stop(rdev); - r600_uvd_rbc_stop(rdev); evergreen_irq_suspend(rdev); radeon_wb_disable(rdev); evergreen_pcie_gart_disable(rdev); @@ -5429,6 +5429,7 @@ void evergreen_fini(struct radeon_device *rdev) radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); evergreen_pcie_gart_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 56bd4f3be4fe..16e91b08bf57 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -2286,7 +2286,7 @@ int cayman_suspend(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); cayman_cp_enable(rdev, false); cayman_dma_stop(rdev); - r600_uvd_rbc_stop(rdev); + r600_uvd_stop(rdev); radeon_uvd_suspend(rdev); evergreen_irq_suspend(rdev); radeon_wb_disable(rdev); @@ -2418,6 +2418,7 @@ void cayman_fini(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_fini(rdev); cayman_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 10f712e37003..0a9553abec54 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2697,12 +2697,29 @@ int r600_uvd_rbc_start(struct radeon_device *rdev) return 0; } -void r600_uvd_rbc_stop(struct radeon_device *rdev) +void r600_uvd_stop(struct radeon_device *rdev) { struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX]; /* force RBC into idle state */ WREG32(UVD_RBC_RB_CNTL, 0x11010101); + + /* Stall UMC and register bus before resetting VCPU */ + WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8)); + WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3)); + mdelay(1); + + /* put VCPU into reset */ + WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET); + mdelay(5); + + /* disable VCPU clock */ + WREG32(UVD_VCPU_CNTL, 0x0); + + /* Unstall UMC and register bus */ + WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8)); + WREG32_P(UVD_RB_ARB_CTRL, 0, ~(1 << 3)); + ring->ready = false; } @@ -2722,6 +2739,11 @@ int r600_uvd_init(struct radeon_device *rdev) /* disable interupt */ WREG32_P(UVD_MASTINT_EN, 0, ~(1 << 1)); + /* Stall UMC and register bus before resetting VCPU */ + WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8)); + WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3)); + mdelay(1); + /* put LMI, VCPU, RBC etc... into reset */ WREG32(UVD_SOFT_RESET, LMI_SOFT_RESET | VCPU_SOFT_RESET | LBSI_SOFT_RESET | RBC_SOFT_RESET | CSM_SOFT_RESET | @@ -2751,10 +2773,6 @@ int r600_uvd_init(struct radeon_device *rdev) WREG32(UVD_MPC_SET_ALU, 0); WREG32(UVD_MPC_SET_MUX, 0x88); - /* Stall UMC */ - WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8)); - WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3)); - /* take all subblocks out of reset, except VCPU */ WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET); mdelay(5); diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 902479fa737f..3d61d5aac18f 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -441,7 +441,7 @@ void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rde /* uvd */ int r600_uvd_init(struct radeon_device *rdev); int r600_uvd_rbc_start(struct radeon_device *rdev); -void r600_uvd_rbc_stop(struct radeon_device *rdev); +void r600_uvd_stop(struct radeon_device *rdev); int r600_uvd_ib_test(struct radeon_device *rdev, struct radeon_ring *ring); void r600_uvd_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 30ea14e8854c..f1010131bac0 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1983,6 +1983,7 @@ int rv770_resume(struct radeon_device *rdev) int rv770_suspend(struct radeon_device *rdev) { r600_audio_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_suspend(rdev); r700_cp_stop(rdev); r600_dma_stop(rdev); @@ -2098,6 +2099,7 @@ void rv770_fini(struct radeon_device *rdev) radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); + r600_uvd_stop(rdev); radeon_uvd_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 6ca904673a4f..242c1ac83e23 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -6621,7 +6621,7 @@ int si_suspend(struct radeon_device *rdev) si_cp_enable(rdev, false); cayman_dma_stop(rdev); if (rdev->has_uvd) { - r600_uvd_rbc_stop(rdev); + r600_uvd_stop(rdev); radeon_uvd_suspend(rdev); } si_irq_suspend(rdev); @@ -6763,8 +6763,10 @@ void si_fini(struct radeon_device *rdev) radeon_vm_manager_fini(rdev); radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); - if (rdev->has_uvd) + if (rdev->has_uvd) { + r600_uvd_stop(rdev); radeon_uvd_fini(rdev); + } si_pcie_gart_fini(rdev); r600_vram_scratch_fini(rdev); radeon_gem_fini(rdev); -- cgit v1.2.3 From ce149a9406c104e7a361afae18a13d4eaa5c2429 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Aug 2013 14:35:02 -0400 Subject: drm/radeon/dpm: disable sclk ss on rv6xx Enabling spread spectrum on the engine clock leads to hangs on some asics. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/rv6xx_dpm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/rv6xx_dpm.c b/drivers/gpu/drm/radeon/rv6xx_dpm.c index e44a90a359a5..bdd888b4db2b 100644 --- a/drivers/gpu/drm/radeon/rv6xx_dpm.c +++ b/drivers/gpu/drm/radeon/rv6xx_dpm.c @@ -1992,6 +1992,9 @@ int rv6xx_dpm_init(struct radeon_device *rdev) pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss, ASIC_INTERNAL_MEMORY_SS, 0); + /* Disable sclk ss, causes hangs on a lot of systems */ + pi->sclk_ss = false; + if (pi->sclk_ss || pi->mclk_ss) pi->dynamic_ss = true; else -- cgit v1.2.3 From 1518dd8efd47918bb269f1470030592875953f6c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 30 Jul 2013 17:31:07 -0400 Subject: drm/radeon: fix audio dto calculation on DCE3+ (v3) Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 26 ++++++++++++++++++++++++-- drivers/gpu/drm/radeon/evergreend.h | 3 +++ drivers/gpu/drm/radeon/r600_hdmi.c | 33 +++++++++++++++++++++++++++++---- drivers/gpu/drm/radeon/r600d.h | 3 +++ 4 files changed, 59 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index bb9ea3641312..b0e280058b9b 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -148,18 +148,40 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); u32 base_rate = 24000; + u32 max_ratio = clock / base_rate; + u32 dto_phase; + u32 dto_modulo = clock; + u32 wallclock_ratio; + u32 dto_cntl; if (!dig || !dig->afmt) return; + if (max_ratio >= 8) { + dto_phase = 192 * 1000; + wallclock_ratio = 3; + } else if (max_ratio >= 4) { + dto_phase = 96 * 1000; + wallclock_ratio = 2; + } else if (max_ratio >= 2) { + dto_phase = 48 * 1000; + wallclock_ratio = 1; + } else { + dto_phase = 24 * 1000; + wallclock_ratio = 0; + } + dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK; + dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio); + WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl); + /* XXX two dtos; generally use dto0 for hdmi */ /* Express [24MHz / target pixel clock] as an exact rational * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator */ WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id)); - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); - WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); + WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase); + WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo); } diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index a7baf67aef6c..0d582ac1dc31 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -497,6 +497,9 @@ #define DCCG_AUDIO_DTO0_MODULE 0x05b4 #define DCCG_AUDIO_DTO0_LOAD 0x05b8 #define DCCG_AUDIO_DTO0_CNTL 0x05bc +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0) +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7 +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0 #define DCCG_AUDIO_DTO1_PHASE 0x05c0 #define DCCG_AUDIO_DTO1_MODULE 0x05c4 diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index b9b1139da356..f264df5470f7 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -226,10 +226,29 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; u32 base_rate = 24000; + u32 max_ratio = clock / base_rate; + u32 dto_phase; + u32 dto_modulo = clock; + u32 wallclock_ratio; + u32 dto_cntl; if (!dig || !dig->afmt) return; + if (max_ratio >= 8) { + dto_phase = 192 * 1000; + wallclock_ratio = 3; + } else if (max_ratio >= 4) { + dto_phase = 96 * 1000; + wallclock_ratio = 2; + } else if (max_ratio >= 2) { + dto_phase = 48 * 1000; + wallclock_ratio = 1; + } else { + dto_phase = 24 * 1000; + wallclock_ratio = 0; + } + /* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT. * doesn't matter which one you use. Just use the first one. */ @@ -243,12 +262,18 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) * practice it seems to cover DCE3.0 as well. */ if (dig->dig_encoder == 0) { - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); - WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); + dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK; + dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio); + WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl); + WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase); + WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo); WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ } else { - WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100); - WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100); + dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK; + dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio); + WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl); + WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase); + WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo); WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ } } else { diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 8e3fe815edab..7c780839a7f4 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -933,6 +933,9 @@ #define DCCG_AUDIO_DTO0_LOAD 0x051c # define DTO_LOAD (1 << 31) #define DCCG_AUDIO_DTO0_CNTL 0x0520 +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0) +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7 +# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0 #define DCCG_AUDIO_DTO1_PHASE 0x0524 #define DCCG_AUDIO_DTO1_MODULE 0x0528 -- cgit v1.2.3 From 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 4 Aug 2013 12:13:17 -0400 Subject: drm/radeon: always program the MC on startup For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/cik.c | 3 ++- drivers/gpu/drm/radeon/evergreen.c | 3 ++- drivers/gpu/drm/radeon/ni.c | 3 ++- drivers/gpu/drm/radeon/r600.c | 3 ++- drivers/gpu/drm/radeon/rv770.c | 3 ++- drivers/gpu/drm/radeon/si.c | 3 ++- 6 files changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 524db70aaf6e..5b587876c7f5 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -5954,6 +5954,8 @@ static int cik_startup(struct radeon_device *rdev) struct radeon_ring *ring; int r; + cik_mc_program(rdev); + if (rdev->flags & RADEON_IS_IGP) { if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw || !rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw) { @@ -5985,7 +5987,6 @@ static int cik_startup(struct radeon_device *rdev) if (r) return r; - cik_mc_program(rdev); r = cik_pcie_gart_enable(rdev); if (r) return r; diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 5b98e573d60a..d5b49e33315e 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -5106,6 +5106,8 @@ static int evergreen_startup(struct radeon_device *rdev) /* enable aspm */ evergreen_program_aspm(rdev); + evergreen_mc_program(rdev); + if (ASIC_IS_DCE5(rdev)) { if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) { r = ni_init_microcode(rdev); @@ -5133,7 +5135,6 @@ static int evergreen_startup(struct radeon_device *rdev) if (r) return r; - evergreen_mc_program(rdev); if (rdev->flags & RADEON_IS_AGP) { evergreen_agp_enable(rdev); } else { diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 16e91b08bf57..12cebe46e34f 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -2079,6 +2079,8 @@ static int cayman_startup(struct radeon_device *rdev) /* enable aspm */ evergreen_program_aspm(rdev); + evergreen_mc_program(rdev); + if (rdev->flags & RADEON_IS_IGP) { if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) { r = ni_init_microcode(rdev); @@ -2107,7 +2109,6 @@ static int cayman_startup(struct radeon_device *rdev) if (r) return r; - evergreen_mc_program(rdev); r = cayman_pcie_gart_enable(rdev); if (r) return r; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0a9553abec54..af848045670c 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3330,6 +3330,8 @@ static int r600_startup(struct radeon_device *rdev) /* enable pcie gen2 link */ r600_pcie_gen2_enable(rdev); + r600_mc_program(rdev); + if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) { r = r600_init_microcode(rdev); if (r) { @@ -3342,7 +3344,6 @@ static int r600_startup(struct radeon_device *rdev) if (r) return r; - r600_mc_program(rdev); if (rdev->flags & RADEON_IS_AGP) { r600_agp_enable(rdev); } else { diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index f1010131bac0..3cc08a4d99d9 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1829,6 +1829,8 @@ static int rv770_startup(struct radeon_device *rdev) /* enable pcie gen2 link */ rv770_pcie_gen2_enable(rdev); + rv770_mc_program(rdev); + if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) { r = r600_init_microcode(rdev); if (r) { @@ -1841,7 +1843,6 @@ static int rv770_startup(struct radeon_device *rdev) if (r) return r; - rv770_mc_program(rdev); if (rdev->flags & RADEON_IS_AGP) { rv770_agp_enable(rdev); } else { diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 242c1ac83e23..6a2dca4acfc1 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -6418,6 +6418,8 @@ static int si_startup(struct radeon_device *rdev) /* enable aspm */ si_program_aspm(rdev); + si_mc_program(rdev); + if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw || !rdev->rlc_fw || !rdev->mc_fw) { r = si_init_microcode(rdev); @@ -6437,7 +6439,6 @@ static int si_startup(struct radeon_device *rdev) if (r) return r; - si_mc_program(rdev); r = si_pcie_gart_enable(rdev); if (r) return r; -- cgit v1.2.3 From 4ad9c1c774c2af152283f510062094e768876f55 Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 5 Aug 2013 14:10:55 +0200 Subject: drm/radeon: only save UVD bo when we have open handles Otherwise just reinitialize from scratch on resume, and so make it more likely to succeed. Signed-off-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 2 +- drivers/gpu/drm/radeon/radeon.h | 2 +- drivers/gpu/drm/radeon/radeon_fence.c | 2 +- drivers/gpu/drm/radeon/radeon_uvd.c | 46 +++++++++++++++++++++++++---------- drivers/gpu/drm/radeon/rv770.c | 2 +- 5 files changed, 37 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 5b587876c7f5..58136f20c060 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -6980,7 +6980,7 @@ int cik_uvd_resume(struct radeon_device *rdev) /* programm the VCPU memory controller bits 0-27 */ addr = rdev->uvd.gpu_addr >> 3; - size = RADEON_GPU_PAGE_ALIGN(rdev->uvd.fw_size + 4) >> 3; + size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3; WREG32(UVD_VCPU_CACHE_OFFSET0, addr); WREG32(UVD_VCPU_CACHE_SIZE0, size); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 2f08219c39b6..76dbe8e9b5c8 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1468,7 +1468,6 @@ struct radeon_uvd { void *cpu_addr; uint64_t gpu_addr; void *saved_bo; - unsigned fw_size; atomic_t handles[RADEON_MAX_UVD_HANDLES]; struct drm_file *filp[RADEON_MAX_UVD_HANDLES]; struct delayed_work idle_work; @@ -2066,6 +2065,7 @@ struct radeon_device { const struct firmware *mec_fw; /* CIK MEC firmware */ const struct firmware *sdma_fw; /* CIK SDMA firmware */ const struct firmware *smc_fw; /* SMC firmware */ + const struct firmware *uvd_fw; /* UVD firmware */ struct r600_blit r600_blit; struct r600_vram_scratch vram_scratch; int msi_enabled; /* msi enabled */ diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 7ddb0efe2408..ddb8f8e04eb5 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -782,7 +782,7 @@ int radeon_fence_driver_start_ring(struct radeon_device *rdev, int ring) } else { /* put fence directly behind firmware */ - index = ALIGN(rdev->uvd.fw_size, 8); + index = ALIGN(rdev->uvd_fw->size, 8); rdev->fence_drv[ring].cpu_addr = rdev->uvd.cpu_addr + index; rdev->fence_drv[ring].gpu_addr = rdev->uvd.gpu_addr + index; } diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 414fd145d20e..ca0d7358ed33 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -56,7 +56,6 @@ static void radeon_uvd_idle_work_handler(struct work_struct *work); int radeon_uvd_init(struct radeon_device *rdev) { - const struct firmware *fw; unsigned long bo_size; const char *fw_name; int i, r; @@ -105,14 +104,14 @@ int radeon_uvd_init(struct radeon_device *rdev) return -EINVAL; } - r = request_firmware(&fw, fw_name, rdev->dev); + r = request_firmware(&rdev->uvd_fw, fw_name, rdev->dev); if (r) { dev_err(rdev->dev, "radeon_uvd: Can't load firmware \"%s\"\n", fw_name); return r; } - bo_size = RADEON_GPU_PAGE_ALIGN(fw->size + 8) + + bo_size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 8) + RADEON_UVD_STACK_SIZE + RADEON_UVD_HEAP_SIZE; r = radeon_bo_create(rdev, bo_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM, NULL, &rdev->uvd.vcpu_bo); @@ -145,12 +144,6 @@ int radeon_uvd_init(struct radeon_device *rdev) radeon_bo_unreserve(rdev->uvd.vcpu_bo); - rdev->uvd.fw_size = fw->size; - memset(rdev->uvd.cpu_addr, 0, bo_size); - memcpy(rdev->uvd.cpu_addr, fw->data, fw->size); - - release_firmware(fw); - for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { atomic_set(&rdev->uvd.handles[i], 0); rdev->uvd.filp[i] = NULL; @@ -174,33 +167,60 @@ void radeon_uvd_fini(struct radeon_device *rdev) } radeon_bo_unref(&rdev->uvd.vcpu_bo); + + release_firmware(rdev->uvd_fw); } int radeon_uvd_suspend(struct radeon_device *rdev) { unsigned size; + void *ptr; + int i; if (rdev->uvd.vcpu_bo == NULL) return 0; + for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) + if (atomic_read(&rdev->uvd.handles[i])) + break; + + if (i == RADEON_MAX_UVD_HANDLES) + return 0; + size = radeon_bo_size(rdev->uvd.vcpu_bo); + size -= rdev->uvd_fw->size; + + ptr = rdev->uvd.cpu_addr; + ptr += rdev->uvd_fw->size; + rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL); - memcpy(rdev->uvd.saved_bo, rdev->uvd.cpu_addr, size); + memcpy(rdev->uvd.saved_bo, ptr, size); return 0; } int radeon_uvd_resume(struct radeon_device *rdev) { + unsigned size; + void *ptr; + if (rdev->uvd.vcpu_bo == NULL) return -EINVAL; + memcpy(rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size); + + size = radeon_bo_size(rdev->uvd.vcpu_bo); + size -= rdev->uvd_fw->size; + + ptr = rdev->uvd.cpu_addr; + ptr += rdev->uvd_fw->size; + if (rdev->uvd.saved_bo != NULL) { - unsigned size = radeon_bo_size(rdev->uvd.vcpu_bo); - memcpy(rdev->uvd.cpu_addr, rdev->uvd.saved_bo, size); + memcpy(ptr, rdev->uvd.saved_bo, size); kfree(rdev->uvd.saved_bo); rdev->uvd.saved_bo = NULL; - } + } else + memset(ptr, 0, size); return 0; } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3cc08a4d99d9..bcc68ec204ad 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -813,7 +813,7 @@ int rv770_uvd_resume(struct radeon_device *rdev) /* programm the VCPU memory controller bits 0-27 */ addr = rdev->uvd.gpu_addr >> 3; - size = RADEON_GPU_PAGE_ALIGN(rdev->uvd.fw_size + 4) >> 3; + size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3; WREG32(UVD_VCPU_CACHE_OFFSET0, addr); WREG32(UVD_VCPU_CACHE_SIZE0, size); -- cgit v1.2.3 From 641a00593f7d07eab778fbabf546fb68fff3d5ce Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 5 Aug 2013 14:10:56 +0200 Subject: drm/radeon: stop sending invalid UVD destroy msg We also need to check the handle. Signed-off-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_uvd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index ca0d7358ed33..4fec195e0dd4 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -235,8 +235,8 @@ void radeon_uvd_free_handles(struct radeon_device *rdev, struct drm_file *filp) { int i, r; for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) { - if (rdev->uvd.filp[i] == filp) { - uint32_t handle = atomic_read(&rdev->uvd.handles[i]); + uint32_t handle = atomic_read(&rdev->uvd.handles[i]); + if (handle != 0 && rdev->uvd.filp[i] == filp) { struct radeon_fence *fence; r = radeon_uvd_get_destroy_msg(rdev, -- cgit v1.2.3 From 56cc2c15389770d2f95a791f73d0ab6b15d530e1 Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 5 Aug 2013 14:10:57 +0200 Subject: drm/radeon: add more UVD CS checking Improve error handling in case userspace sends us an invalid command buffer. Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_uvd.c | 43 ++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index 4fec195e0dd4..f1c15754e73c 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -357,8 +357,10 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, } r = radeon_bo_kmap(bo, &ptr); - if (r) + if (r) { + DRM_ERROR("Failed mapping the UVD message (%d)!\n", r); return r; + } msg = ptr + offset; @@ -384,8 +386,14 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, radeon_bo_kunmap(bo); return 0; } else { - /* it's a create msg, no special handling needed */ radeon_bo_kunmap(bo); + + if (msg_type != 0) { + DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); + return -EINVAL; + } + + /* it's a create msg, no special handling needed */ } /* create or decode, validate the handle */ @@ -408,7 +416,7 @@ static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo, static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, int data0, int data1, - unsigned buf_sizes[]) + unsigned buf_sizes[], bool *has_msg_cmd) { struct radeon_cs_chunk *relocs_chunk; struct radeon_cs_reloc *reloc; @@ -437,7 +445,7 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, if (cmd < 0x4) { if ((end - start) < buf_sizes[cmd]) { - DRM_ERROR("buffer to small (%d / %d)!\n", + DRM_ERROR("buffer (%d) to small (%d / %d)!\n", cmd, (unsigned)(end - start), buf_sizes[cmd]); return -EINVAL; } @@ -462,9 +470,17 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, } if (cmd == 0) { + if (*has_msg_cmd) { + DRM_ERROR("More than one message in a UVD-IB!\n"); + return -EINVAL; + } + *has_msg_cmd = true; r = radeon_uvd_cs_msg(p, reloc->robj, offset, buf_sizes); if (r) return r; + } else if (!*has_msg_cmd) { + DRM_ERROR("Message needed before other commands are send!\n"); + return -EINVAL; } return 0; @@ -473,7 +489,8 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p, static int radeon_uvd_cs_reg(struct radeon_cs_parser *p, struct radeon_cs_packet *pkt, int *data0, int *data1, - unsigned buf_sizes[]) + unsigned buf_sizes[], + bool *has_msg_cmd) { int i, r; @@ -487,7 +504,8 @@ static int radeon_uvd_cs_reg(struct radeon_cs_parser *p, *data1 = p->idx; break; case UVD_GPCOM_VCPU_CMD: - r = radeon_uvd_cs_reloc(p, *data0, *data1, buf_sizes); + r = radeon_uvd_cs_reloc(p, *data0, *data1, + buf_sizes, has_msg_cmd); if (r) return r; break; @@ -508,6 +526,9 @@ int radeon_uvd_cs_parse(struct radeon_cs_parser *p) struct radeon_cs_packet pkt; int r, data0 = 0, data1 = 0; + /* does the IB has a msg command */ + bool has_msg_cmd = false; + /* minimum buffer sizes */ unsigned buf_sizes[] = { [0x00000000] = 2048, @@ -534,8 +555,8 @@ int radeon_uvd_cs_parse(struct radeon_cs_parser *p) return r; switch (pkt.type) { case RADEON_PACKET_TYPE0: - r = radeon_uvd_cs_reg(p, &pkt, &data0, - &data1, buf_sizes); + r = radeon_uvd_cs_reg(p, &pkt, &data0, &data1, + buf_sizes, &has_msg_cmd); if (r) return r; break; @@ -547,6 +568,12 @@ int radeon_uvd_cs_parse(struct radeon_cs_parser *p) return -EINVAL; } } while (p->idx < p->chunks[p->chunk_ib_idx].length_dw); + + if (!has_msg_cmd) { + DRM_ERROR("UVD-IBs need a msg command!\n"); + return -EINVAL; + } + return 0; } -- cgit v1.2.3 From 3744b248f9c617295f1fd015d67281a67e592ecb Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 5 Aug 2013 14:10:58 +0200 Subject: drm/radeon: remove unnecessary unpin We don't pin the BO on allocation, so don't unpin it on free. Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_gart.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 6a51d943ccf4..b990b1a2bd50 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -207,7 +207,6 @@ void radeon_gart_table_vram_free(struct radeon_device *rdev) if (rdev->gart.robj == NULL) { return; } - radeon_gart_table_vram_unpin(rdev); radeon_bo_unref(&rdev->gart.robj); } -- cgit v1.2.3 From f61d5b46771a352fad1ac7f99008ef52a7ffcb72 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Aug 2013 12:40:16 -0400 Subject: drm/radeon/cik: use a mutex to properly lock srbm instanced registers We need proper locking in the driver when accessing instanced registers on CIK. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 10 ++++++++++ drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_device.c | 1 + 3 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 58136f20c060..8928bd109c16 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -2587,9 +2587,11 @@ u32 cik_compute_ring_get_rptr(struct radeon_device *rdev, if (rdev->wb.enabled) { rptr = le32_to_cpu(rdev->wb.wb[ring->rptr_offs/4]); } else { + mutex_lock(&rdev->srbm_mutex); cik_srbm_select(rdev, ring->me, ring->pipe, ring->queue, 0); rptr = RREG32(CP_HQD_PQ_RPTR); cik_srbm_select(rdev, 0, 0, 0, 0); + mutex_unlock(&rdev->srbm_mutex); } rptr = (rptr & ring->ptr_reg_mask) >> ring->ptr_reg_shift; @@ -2604,9 +2606,11 @@ u32 cik_compute_ring_get_wptr(struct radeon_device *rdev, if (rdev->wb.enabled) { wptr = le32_to_cpu(rdev->wb.wb[ring->wptr_offs/4]); } else { + mutex_lock(&rdev->srbm_mutex); cik_srbm_select(rdev, ring->me, ring->pipe, ring->queue, 0); wptr = RREG32(CP_HQD_PQ_WPTR); cik_srbm_select(rdev, 0, 0, 0, 0); + mutex_unlock(&rdev->srbm_mutex); } wptr = (wptr & ring->ptr_reg_mask) >> ring->ptr_reg_shift; @@ -2897,6 +2901,7 @@ static int cik_cp_compute_resume(struct radeon_device *rdev) WREG32(CP_CPF_DEBUG, tmp); /* init the pipes */ + mutex_lock(&rdev->srbm_mutex); for (i = 0; i < (rdev->mec.num_pipe * rdev->mec.num_mec); i++) { int me = (i < 4) ? 1 : 2; int pipe = (i < 4) ? i : (i - 4); @@ -2919,6 +2924,7 @@ static int cik_cp_compute_resume(struct radeon_device *rdev) WREG32(CP_HPD_EOP_CONTROL, tmp); } cik_srbm_select(rdev, 0, 0, 0, 0); + mutex_unlock(&rdev->srbm_mutex); /* init the queues. Just two for now. */ for (i = 0; i < 2; i++) { @@ -2972,6 +2978,7 @@ static int cik_cp_compute_resume(struct radeon_device *rdev) mqd->static_thread_mgmt23[0] = 0xffffffff; mqd->static_thread_mgmt23[1] = 0xffffffff; + mutex_lock(&rdev->srbm_mutex); cik_srbm_select(rdev, rdev->ring[idx].me, rdev->ring[idx].pipe, rdev->ring[idx].queue, 0); @@ -3099,6 +3106,7 @@ static int cik_cp_compute_resume(struct radeon_device *rdev) WREG32(CP_HQD_ACTIVE, mqd->queue_state.cp_hqd_active); cik_srbm_select(rdev, 0, 0, 0, 0); + mutex_unlock(&rdev->srbm_mutex); radeon_bo_kunmap(rdev->ring[idx].mqd_obj); radeon_bo_unreserve(rdev->ring[idx].mqd_obj); @@ -4320,6 +4328,7 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) /* XXX SH_MEM regs */ /* where to put LDS, scratch, GPUVM in FSA64 space */ + mutex_lock(&rdev->srbm_mutex); for (i = 0; i < 16; i++) { cik_srbm_select(rdev, 0, 0, 0, i); /* CP and shaders */ @@ -4335,6 +4344,7 @@ static int cik_pcie_gart_enable(struct radeon_device *rdev) /* XXX SDMA RLC - todo */ } cik_srbm_select(rdev, 0, 0, 0, 0); + mutex_unlock(&rdev->srbm_mutex); cik_pcie_gart_tlb_flush(rdev); DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n", diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 76dbe8e9b5c8..274b8e1b889f 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -2095,6 +2095,8 @@ struct radeon_device { /* ACPI interface */ struct radeon_atif atif; struct radeon_atcs atcs; + /* srbm instance registers */ + struct mutex srbm_mutex; }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 84dd2dcbcf69..63398ae1dbf5 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1163,6 +1163,7 @@ int radeon_device_init(struct radeon_device *rdev, mutex_init(&rdev->gem.mutex); mutex_init(&rdev->pm.mutex); mutex_init(&rdev->gpu_clock_mutex); + mutex_init(&rdev->srbm_mutex); init_rwsem(&rdev->pm.mclk_lock); init_rwsem(&rdev->exclusive_lock); init_waitqueue_head(&rdev->irq.vblank_queue); -- cgit v1.2.3 From 761bfb999868c413aabed8caa345694836ec6f11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Aug 2013 13:34:00 -0400 Subject: drm/radeon/dpm: require rlc for dpm The rlc is required for dpm to work properly, so if the rlc ucode is missing, don't enable dpm. Enabling dpm without the rlc enabled can result in hangs. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_pm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index f374c467aaca..6a7a80b8a00a 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1176,7 +1176,10 @@ int radeon_pm_init(struct radeon_device *rdev) case CHIP_VERDE: case CHIP_OLAND: case CHIP_HAINAN: - if (radeon_dpm == 1) + /* DPM requires the RLC */ + if (!rdev->rlc_fw) + rdev->pm.pm_method = PM_METHOD_PROFILE; + else if (radeon_dpm == 1) rdev->pm.pm_method = PM_METHOD_DPM; else rdev->pm.pm_method = PM_METHOD_PROFILE; -- cgit v1.2.3 From 8a53fa23fd3e7c22d93f28e6aaae8358c53326ba Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 7 Aug 2013 16:09:08 -0400 Subject: drm/radeon: make missing smc ucode non-fatal The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/ni.c | 10 +++++++--- drivers/gpu/drm/radeon/r600.c | 10 +++++++--- drivers/gpu/drm/radeon/radeon_pm.c | 6 +++++- drivers/gpu/drm/radeon/si.c | 10 +++++++--- 4 files changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 12cebe46e34f..ccb4f8b54852 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -794,9 +794,13 @@ int ni_init_microcode(struct radeon_device *rdev) if ((rdev->family >= CHIP_BARTS) && (rdev->family <= CHIP_CAYMAN)) { snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name); err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev); - if (err) - goto out; - if (rdev->smc_fw->size != smc_req_size) { + if (err) { + printk(KERN_ERR + "smc: error loading firmware \"%s\"\n", + fw_name); + release_firmware(rdev->smc_fw); + rdev->smc_fw = NULL; + } else if (rdev->smc_fw->size != smc_req_size) { printk(KERN_ERR "ni_mc: Bogus length %zu in firmware \"%s\"\n", rdev->mc_fw->size, fw_name); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index af848045670c..e66e72077350 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2299,9 +2299,13 @@ int r600_init_microcode(struct radeon_device *rdev) if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_HEMLOCK)) { snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", smc_chip_name); err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev); - if (err) - goto out; - if (rdev->smc_fw->size != smc_req_size) { + if (err) { + printk(KERN_ERR + "smc: error loading firmware \"%s\"\n", + fw_name); + release_firmware(rdev->smc_fw); + rdev->smc_fw = NULL; + } else if (rdev->smc_fw->size != smc_req_size) { printk(KERN_ERR "smc: Bogus length %zu in firmware \"%s\"\n", rdev->smc_fw->size, fw_name); diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 6a7a80b8a00a..c557850cd345 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1176,9 +1176,13 @@ int radeon_pm_init(struct radeon_device *rdev) case CHIP_VERDE: case CHIP_OLAND: case CHIP_HAINAN: - /* DPM requires the RLC */ + /* DPM requires the RLC, RV770+ dGPU requires SMC */ if (!rdev->rlc_fw) rdev->pm.pm_method = PM_METHOD_PROFILE; + else if ((rdev->family >= CHIP_RV770) && + (!(rdev->flags & RADEON_IS_IGP)) && + (!rdev->smc_fw)) + rdev->pm.pm_method = PM_METHOD_PROFILE; else if (radeon_dpm == 1) rdev->pm.pm_method = PM_METHOD_DPM; else diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 6a2dca4acfc1..daa8d2df8ec5 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -1663,9 +1663,13 @@ static int si_init_microcode(struct radeon_device *rdev) snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name); err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev); - if (err) - goto out; - if (rdev->smc_fw->size != smc_req_size) { + if (err) { + printk(KERN_ERR + "smc: error loading firmware \"%s\"\n", + fw_name); + release_firmware(rdev->smc_fw); + rdev->smc_fw = NULL; + } else if (rdev->smc_fw->size != smc_req_size) { printk(KERN_ERR "si_smc: Bogus length %zu in firmware \"%s\"\n", rdev->smc_fw->size, fw_name); -- cgit v1.2.3 From e91abf80a0998f326107874c88d549f94839f13c Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 12 Jun 2013 11:58:44 +0200 Subject: drm: Don't pass negative delta to ktime_sub_ns() It takes an unsigned value. This happens not to blow up on 64-bit architectures, but it does on 32-bit, causing drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus timestamps for vblank events. Which in turn causes e.g. gnome-shell to hang after a DPMS off cycle with current xf86-video-ati Git. [airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos] Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836 Tested-by: shui yangwei Signed-off-by: Michel Dänzer Reviewed-by: Imre Deak Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 8bcce7866d36..f92da0a32f0d 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -708,7 +708,10 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc, /* Subtract time delta from raw timestamp to get final * vblank_time timestamp for end of vblank. */ - etime = ktime_sub_ns(etime, delta_ns); + if (delta_ns < 0) + etime = ktime_add_ns(etime, -delta_ns); + else + etime = ktime_sub_ns(etime, delta_ns); *vblank_time = ktime_to_timeval(etime); DRM_DEBUG("crtc %d : v %d p(%d,%d)@ %ld.%ld -> %ld.%ld [e %d us, %d rep]\n", -- cgit v1.2.3 From 93d783bcca69bfacc8dc739d8a050498402587b5 Mon Sep 17 00:00:00 2001 From: Curt Brune Date: Thu, 8 Aug 2013 12:11:03 -0700 Subject: hwmon: (adt7470) Fix incorrect return code check In adt7470_write_word_data(), which writes two bytes using i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed together when they should be OR-ed together. The return code of i2c_smbus_write_byte_data() is zero for success. The upshot is only the first byte was ever written to the hardware. The 2nd byte was never written out. I noticed that trying to set the fan speed limits was not working correctly on my system. Setting the fan speed limits is the only code that uses adt7470_write_word_data(). After making the change the limit settings work and the alarms work also. Signed-off-by: Curt Brune Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7470.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 0f34bca9f5e5..6099f50b28aa 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -215,7 +215,7 @@ static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg, u16 value) { return i2c_smbus_write_byte_data(client, reg, value & 0xFF) - && i2c_smbus_write_byte_data(client, reg + 1, value >> 8); + || i2c_smbus_write_byte_data(client, reg + 1, value >> 8); } static void adt7470_init_client(struct i2c_client *client) -- cgit v1.2.3 From 8e5654ce6914b950b42d1f896f3d8a75fbf307ae Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 9 Aug 2013 11:34:19 +0200 Subject: Revert "HID: hid-logitech-dj: querying_devices was never set" This reverts commit 407a2c2a4d85100c8c67953e4bac2f4a6c942335. Explanation provided by Benjamin Tissoires: Commit "HID: hid-logitech-dj, querying_devices was never set" activate a flag which guarantees that we do not ask the receiver for too many enumeration. When the flag is set, each following enumeration call is discarded (the usb request is not forwarded to the receiver). The flag is then released when the driver receive a pairing information event, which normally follows the enumeration request. However, the USB3 bug makes the driver think the enumeration request has been forwarded to the receiver. However, it is actually not the case because the USB stack returns -EPIPE. So, when a new unknown device appears, the workaround consisting in asking for a new enumeration is not working anymore: this new enumeration is discarded because of the flag, which is never reset. A solution could be to trigger a timeout before releasing it, but for now, let's just revert the patch. Reported-by: Benjamin Tissoires Tested-by: Sune Mølgaard Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-dj.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 7a5764843bfb..cd33084c7860 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -488,8 +488,6 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) if (djrcv_dev->querying_devices) return 0; - djrcv_dev->querying_devices = true; - dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; -- cgit v1.2.3 From 18b94f66f9537003cee30d475d79a57c58f1e1d8 Mon Sep 17 00:00:00 2001 From: Aravind Gopalakrishnan Date: Fri, 9 Aug 2013 11:54:49 -0500 Subject: amd64_edac: Add ECC decoding support for newer F15h models On newer models, support has been included for upto 4 DCT's, however, only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10). Also, the routing DRAM Requests algorithm is different for F15h M30h. Thus it is cleaner to use a brand new function rather than adding quirks to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM Routing Requests" in the BKDG for further info. Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and verified to be functionally correct. While at it, verify if erratum workarounds for E505 and E637 still hold. From email conversations within AMD, the current status of the errata is: * Erratum 505: fixed in model 0x1, stepping 0x1 and later. * Erratum 637: not fixed. Signed-off-by: Aravind Gopalakrishnan [ Cleanups, corrections ] Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 246 ++++++++++++++++++++++++++++++++++++++++------ drivers/edac/amd64_edac.h | 58 ++++++++++- 2 files changed, 270 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 8b6a0343c220..a5d6348d591f 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -123,7 +123,7 @@ static void f15h_select_dct(struct amd64_pvt *pvt, u8 dct) u32 reg = 0; amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, ®); - reg &= 0xfffffffe; + reg &= (pvt->model >= 0x30) ? ~3 : ~1; reg |= dct; amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg); } @@ -133,8 +133,9 @@ static int f15_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val, { u8 dct = 0; + /* For F15 M30h, the second dct is DCT 3, refer to BKDG Section 2.10 */ if (addr >= 0x140 && addr <= 0x1a0) { - dct = 1; + dct = (pvt->model >= 0x30) ? 3 : 1; addr -= 0x100; } @@ -205,8 +206,10 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw) if (boot_cpu_data.x86 == 0xf) min_scrubrate = 0x0; - /* F15h Erratum #505 */ - if (boot_cpu_data.x86 == 0x15) + /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */ + if (boot_cpu_data.x86 == 0x15 && + boot_cpu_data.x86_model <= 0x01 && + boot_cpu_data.x86_mask < 0x1) f15h_select_dct(pvt, 0); return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate); @@ -218,8 +221,10 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci) u32 scrubval = 0; int i, retval = -EINVAL; - /* F15h Erratum #505 */ - if (boot_cpu_data.x86 == 0x15) + /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */ + if (boot_cpu_data.x86 == 0x15 && + boot_cpu_data.x86_model <= 0x01 && + boot_cpu_data.x86_mask < 0x1) f15h_select_dct(pvt, 0); amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); @@ -335,7 +340,7 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, u64 csbase, csmask, base_bits, mask_bits; u8 addr_shift; - if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) { + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) { csbase = pvt->csels[dct].csbases[csrow]; csmask = pvt->csels[dct].csmasks[csrow]; base_bits = GENMASK(21, 31) | GENMASK(9, 15); @@ -343,10 +348,11 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, addr_shift = 4; /* - * F16h needs two addr_shift values: 8 for high and 6 for low - * (cf. F16h BKDG). - */ - } else if (boot_cpu_data.x86 == 0x16) { + * F16h and F15h, models 30h and later need two addr_shift values: + * 8 for high and 6 for low (cf. F16h BKDG). + */ + } else if (pvt->fam == 0x16 || + (pvt->fam == 0x15 && pvt->model >= 0x30)) { csbase = pvt->csels[dct].csbases[csrow]; csmask = pvt->csels[dct].csmasks[csrow >> 1]; @@ -736,13 +742,16 @@ static void dump_misc_regs(struct amd64_pvt *pvt) } /* - * see BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] + * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] */ static void prep_chip_selects(struct amd64_pvt *pvt) { - if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) { + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) { pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8; + } else if (pvt->fam == 0x15 && pvt->model >= 0x30) { + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2; } else { pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4; @@ -916,15 +925,15 @@ static struct pci_dev *pci_get_related_function(unsigned int vendor, static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) { struct amd_northbridge *nb; - struct pci_dev *misc, *f1 = NULL; - struct cpuinfo_x86 *c = &boot_cpu_data; + struct pci_dev *f1 = NULL; + unsigned int pci_func; int off = range << 3; u32 llim; amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo); amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo); - if (c->x86 == 0xf) + if (pvt->fam == 0xf) return; if (!dram_rw(pvt, range)) @@ -934,15 +943,17 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi); /* F15h: factor in CC6 save area by reading dst node's limit reg */ - if (c->x86 != 0x15) + if (pvt->fam != 0x15) return; nb = node_to_amd_nb(dram_dst_node(pvt, range)); if (WARN_ON(!nb)) return; - misc = nb->misc; - f1 = pci_get_related_function(misc->vendor, PCI_DEVICE_ID_AMD_15H_NB_F1, misc); + pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 + : PCI_DEVICE_ID_AMD_15H_NB_F1; + + f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc); if (WARN_ON(!f1)) return; @@ -1173,7 +1184,7 @@ static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, } /* - * F16h has only limited cs_modes + * F16h and F15h model 30h have only limited cs_modes. */ static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, unsigned cs_mode) @@ -1217,6 +1228,29 @@ static void read_dram_ctl_register(struct amd64_pvt *pvt) amd64_read_dct_pci_cfg(pvt, DCT_SEL_HI, &pvt->dct_sel_hi); } +/* + * Determine channel (DCT) based on the interleaving mode (see F15h M30h BKDG, + * 2.10.12 Memory Interleaving Modes). + */ +static u8 f15_m30h_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, + u8 intlv_en, int num_dcts_intlv, + u32 dct_sel) +{ + u8 channel = 0; + u8 select; + + if (!(intlv_en)) + return (u8)(dct_sel); + + if (num_dcts_intlv == 2) { + select = (sys_addr >> 8) & 0x3; + channel = select ? 0x3 : 0; + } else if (num_dcts_intlv == 4) + channel = (sys_addr >> 8) & 0x7; + + return channel; +} + /* * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory * Interleaving Modes. @@ -1366,6 +1400,10 @@ static int f1x_lookup_addr_in_dct(u64 in_addr, u8 nid, u8 dct) (in_addr & cs_mask), (cs_base & cs_mask)); if ((in_addr & cs_mask) == (cs_base & cs_mask)) { + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + cs_found = csrow; + break; + } cs_found = f10_process_possible_spare(pvt, dct, csrow); edac_dbg(1, " MATCH csrow=%d\n", cs_found); @@ -1492,20 +1530,142 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range, return cs_found; } -static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, - int *chan_sel) +static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, + u64 sys_addr, int *chan_sel) +{ + int cs_found = -EINVAL; + int num_dcts_intlv = 0; + u64 chan_addr, chan_offset; + u64 dct_base, dct_limit; + u32 dct_cont_base_reg, dct_cont_limit_reg, tmp; + u8 channel, alias_channel, leg_mmio_hole, dct_sel, dct_offset_en; + + u64 dhar_offset = f10_dhar_offset(pvt); + u8 intlv_addr = dct_sel_interleave_addr(pvt); + u8 node_id = dram_dst_node(pvt, range); + u8 intlv_en = dram_intlv_en(pvt, range); + + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &dct_cont_base_reg); + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &dct_cont_limit_reg); + + dct_offset_en = (u8) ((dct_cont_base_reg >> 3) & BIT(0)); + dct_sel = (u8) ((dct_cont_base_reg >> 4) & 0x7); + + edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n", + range, sys_addr, get_dram_limit(pvt, range)); + + if (!(get_dram_base(pvt, range) <= sys_addr) && + !(get_dram_limit(pvt, range) >= sys_addr)) + return -EINVAL; + + if (dhar_valid(pvt) && + dhar_base(pvt) <= sys_addr && + sys_addr < BIT_64(32)) { + amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n", + sys_addr); + return -EINVAL; + } + + /* Verify sys_addr is within DCT Range. */ + dct_base = (dct_sel_baseaddr(pvt) << 27); + dct_limit = (((dct_cont_limit_reg >> 11) & 0x1FFF) << 27) | 0x7FFFFFF; + + if (!(dct_cont_base_reg & BIT(0)) && + !(dct_base <= sys_addr && dct_limit >= sys_addr)) + return -EINVAL; + + /* Verify number of dct's that participate in channel interleaving. */ + num_dcts_intlv = (int) hweight8(intlv_en); + + if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4)) + return -EINVAL; + + channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en, + num_dcts_intlv, dct_sel); + + /* Verify we stay within the MAX number of channels allowed */ + if (channel > 4 || channel < 0) + return -EINVAL; + + leg_mmio_hole = (u8) (dct_cont_base_reg >> 1 & BIT(0)); + + /* Get normalized DCT addr */ + if (leg_mmio_hole && (sys_addr >= BIT_64(32))) + chan_offset = dhar_offset; + else + chan_offset = dct_base; + + chan_addr = sys_addr - chan_offset; + + /* remove channel interleave */ + if (num_dcts_intlv == 2) { + if (intlv_addr == 0x4) + chan_addr = ((chan_addr >> 9) << 8) | + (chan_addr & 0xff); + else if (intlv_addr == 0x5) + chan_addr = ((chan_addr >> 10) << 9) | + (chan_addr & 0x1ff); + else + return -EINVAL; + + } else if (num_dcts_intlv == 4) { + if (intlv_addr == 0x4) + chan_addr = ((chan_addr >> 10) << 8) | + (chan_addr & 0xff); + else if (intlv_addr == 0x5) + chan_addr = ((chan_addr >> 11) << 9) | + (chan_addr & 0x1ff); + else + return -EINVAL; + } + + if (dct_offset_en) { + amd64_read_pci_cfg(pvt->F1, + DRAM_CONT_HIGH_OFF + (int) channel * 4, + &tmp); + chan_addr += ((tmp >> 11) & 0xfff) << 27; + } + + f15h_select_dct(pvt, channel); + + edac_dbg(1, " Normalized DCT addr: 0x%llx\n", chan_addr); + + /* + * Find Chip select: + * if channel = 3, then alias it to 1. This is because, in F15 M30h, + * there is support for 4 DCT's, but only 2 are currently functional. + * They are DCT0 and DCT3. But we have read all registers of DCT3 into + * pvt->csels[1]. So we need to use '1' here to get correct info. + * Refer F15 M30h BKDG Section 2.10 and 2.10.3 for clarifications. + */ + alias_channel = (channel == 3) ? 1 : channel; + + cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, alias_channel); + + if (cs_found >= 0) + *chan_sel = alias_channel; + + return cs_found; +} + +static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, + u64 sys_addr, + int *chan_sel) { int cs_found = -EINVAL; unsigned range; for (range = 0; range < DRAM_RANGES; range++) { - if (!dram_rw(pvt, range)) continue; - if ((get_dram_base(pvt, range) <= sys_addr) && - (get_dram_limit(pvt, range) >= sys_addr)) { + if (pvt->fam == 0x15 && pvt->model >= 0x30) + cs_found = f15_m30h_match_to_this_node(pvt, range, + sys_addr, + chan_sel); + else if ((get_dram_base(pvt, range) <= sys_addr) && + (get_dram_limit(pvt, range) >= sys_addr)) { cs_found = f1x_match_to_this_node(pvt, range, sys_addr, chan_sel); if (cs_found >= 0) @@ -1624,6 +1784,17 @@ static struct amd64_family_type amd64_family_types[] = { .read_dct_pci_cfg = f15_read_dct_pci_cfg, } }, + [F15_M30H_CPUS] = { + .ctl_name = "F15h_M30h", + .f1_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1, + .f3_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F3, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f16_dbam_to_chip_select, + .read_dct_pci_cfg = f15_read_dct_pci_cfg, + } + }, [F16_CPUS] = { .ctl_name = "F16h", .f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1, @@ -2387,10 +2558,13 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci, */ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) { - u8 fam = boot_cpu_data.x86; struct amd64_family_type *fam_type = NULL; - switch (fam) { + pvt->ext_model = boot_cpu_data.x86_model >> 4; + pvt->model = boot_cpu_data.x86_model; + pvt->fam = boot_cpu_data.x86; + + switch (pvt->fam) { case 0xf: fam_type = &amd64_family_types[K8_CPUS]; pvt->ops = &amd64_family_types[K8_CPUS].ops; @@ -2402,6 +2576,12 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) break; case 0x15: + if (pvt->model == 0x30) { + fam_type = &amd64_family_types[F15_M30H_CPUS]; + pvt->ops = &amd64_family_types[F15_M30H_CPUS].ops; + break; + } + fam_type = &amd64_family_types[F15_CPUS]; pvt->ops = &amd64_family_types[F15_CPUS].ops; break; @@ -2416,10 +2596,8 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) return NULL; } - pvt->ext_model = boot_cpu_data.x86_model >> 4; - amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name, - (fam == 0xf ? + (pvt->fam == 0xf ? (pvt->ext_model >= K8_REV_F ? "revF or later " : "revE or earlier ") : ""), pvt->mc_node_id); @@ -2636,6 +2814,14 @@ static DEFINE_PCI_DEVICE_TABLE(amd64_pci_table) = { .class = 0, .class_mask = 0, }, + { + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + }, { .vendor = PCI_VENDOR_ID_AMD, .device = PCI_DEVICE_ID_AMD_16H_NB_F2, diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 2c6f113bae2b..8fddad7b3b95 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -170,6 +170,8 @@ /* * PCI-defined configuration space registers */ +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 #define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531 @@ -181,13 +183,22 @@ #define DRAM_BASE_LO 0x40 #define DRAM_LIMIT_LO 0x44 -#define dram_intlv_en(pvt, i) ((u8)((pvt->ranges[i].base.lo >> 8) & 0x7)) +/* + * F15 M30h D18F1x2[1C:00] + */ +#define DRAM_CONT_BASE 0x200 +#define DRAM_CONT_LIMIT 0x204 + +/* + * F15 M30h D18F1x2[4C:40] + */ +#define DRAM_CONT_HIGH_OFF 0x240 + #define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3)) #define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7)) #define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7)) #define DHAR 0xf0 -#define dhar_valid(pvt) ((pvt)->dhar & BIT(0)) #define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1)) #define dhar_base(pvt) ((pvt)->dhar & 0xff000000) #define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16) @@ -234,8 +245,6 @@ #define DDR3_MODE BIT(8) #define DCT_SEL_LO 0x110 -#define dct_sel_baseaddr(pvt) ((pvt)->dct_sel_lo & 0xFFFFF800) -#define dct_sel_interleave_addr(pvt) (((pvt)->dct_sel_lo >> 6) & 0x3) #define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0)) #define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2)) @@ -297,6 +306,7 @@ enum amd_families { K8_CPUS = 0, F10_CPUS, F15_CPUS, + F15_M30H_CPUS, F16_CPUS, NUM_FAMILIES, }; @@ -337,6 +347,8 @@ struct amd64_pvt { struct pci_dev *F1, *F2, *F3; u16 mc_node_id; /* MC index of this MC node */ + u8 fam; /* CPU family */ + u8 model; /* CPU model */ int ext_model; /* extended model value of this node */ int channel_count; @@ -414,6 +426,14 @@ static inline u16 extract_syndrome(u64 status) return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00); } +static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) + return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) | + ((pvt->dct_sel_lo >> 6) & 0x3); + + return ((pvt)->dct_sel_lo >> 6) & 0x3; +} /* * per-node ECC settings descriptor */ @@ -504,3 +524,33 @@ static inline void enable_caches(void *dummy) { write_cr0(read_cr0() & ~X86_CR0_CD); } + +static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp); + return (u8) tmp & 0xF; + } + return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7; +} + +static inline u8 dhar_valid(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 1) & BIT(0); + } + return (pvt)->dhar & BIT(0); +} + +static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 11) & 0x1FFF; + } + return (pvt)->dct_sel_lo & 0xFFFFF800; +} -- cgit v1.2.3 From a4b4bedce880046feeb5b206392960f395ed02ad Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 10 Aug 2013 13:54:48 +0200 Subject: amd64_edac: Get rid of boot_cpu_data accesses Now that we cache (family, model, stepping) locally, use them instead of boot_cpu_data. No functionality change. Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 90 ++++++++++++++++++++++------------------------- drivers/edac/amd64_edac.h | 4 ++- 2 files changed, 46 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index a5d6348d591f..d6c0c6590607 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -203,13 +203,11 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw) struct amd64_pvt *pvt = mci->pvt_info; u32 min_scrubrate = 0x5; - if (boot_cpu_data.x86 == 0xf) + if (pvt->fam == 0xf) min_scrubrate = 0x0; /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */ - if (boot_cpu_data.x86 == 0x15 && - boot_cpu_data.x86_model <= 0x01 && - boot_cpu_data.x86_mask < 0x1) + if (pvt->fam == 0x15 && pvt->model <= 0x01 && pvt->stepping < 0x1) f15h_select_dct(pvt, 0); return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate); @@ -222,9 +220,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci) int i, retval = -EINVAL; /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */ - if (boot_cpu_data.x86 == 0x15 && - boot_cpu_data.x86_model <= 0x01 && - boot_cpu_data.x86_mask < 0x1) + if (pvt->fam == 0x15 && pvt->model <= 0x01 && pvt->stepping < 0x1) f15h_select_dct(pvt, 0); amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); @@ -373,7 +369,7 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, csmask = pvt->csels[dct].csmasks[csrow >> 1]; addr_shift = 8; - if (boot_cpu_data.x86 == 0x15) + if (pvt->fam == 0x15) base_bits = mask_bits = GENMASK(19,30) | GENMASK(5,13); else base_bits = mask_bits = GENMASK(19,28) | GENMASK(5,13); @@ -453,14 +449,14 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, struct amd64_pvt *pvt = mci->pvt_info; /* only revE and later have the DRAM Hole Address Register */ - if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_E) { + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_E) { edac_dbg(1, " revision %d for node %d does not support DHAR\n", pvt->ext_model, pvt->mc_node_id); return 1; } /* valid for Fam10h and above */ - if (boot_cpu_data.x86 >= 0x10 && !dhar_mem_hoist_valid(pvt)) { + if (pvt->fam >= 0x10 && !dhar_mem_hoist_valid(pvt)) { edac_dbg(1, " Dram Memory Hoisting is DISABLED on this system\n"); return 1; } @@ -492,10 +488,8 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, *hole_base = dhar_base(pvt); *hole_size = (1ULL << 32) - *hole_base; - if (boot_cpu_data.x86 > 0xf) - *hole_offset = f10_dhar_offset(pvt); - else - *hole_offset = k8_dhar_offset(pvt); + *hole_offset = (pvt->fam > 0xf) ? f10_dhar_offset(pvt) + : k8_dhar_offset(pvt); edac_dbg(1, " DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n", pvt->mc_node_id, (unsigned long)*hole_base, @@ -669,7 +663,7 @@ static unsigned long amd64_determine_edac_cap(struct amd64_pvt *pvt) u8 bit; unsigned long edac_cap = EDAC_FLAG_NONE; - bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F) + bit = (pvt->fam > 0xf || pvt->ext_model >= K8_REV_F) ? 19 : 17; @@ -681,7 +675,7 @@ static unsigned long amd64_determine_edac_cap(struct amd64_pvt *pvt) static void amd64_debug_display_dimm_sizes(struct amd64_pvt *, u8); -static void amd64_dump_dramcfg_low(u32 dclr, int chan) +static void amd64_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan) { edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr); @@ -692,7 +686,7 @@ static void amd64_dump_dramcfg_low(u32 dclr, int chan) edac_dbg(1, " PAR/ERR parity: %s\n", (dclr & BIT(8)) ? "enabled" : "disabled"); - if (boot_cpu_data.x86 == 0x10) + if (pvt->fam == 0x10) edac_dbg(1, " DCT 128bit mode width: %s\n", (dclr & BIT(11)) ? "128b" : "64b"); @@ -715,21 +709,21 @@ static void dump_misc_regs(struct amd64_pvt *pvt) (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no", (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no"); - amd64_dump_dramcfg_low(pvt->dclr0, 0); + amd64_dump_dramcfg_low(pvt, pvt->dclr0, 0); edac_dbg(1, "F3xB0 (Online Spare): 0x%08x\n", pvt->online_spare); edac_dbg(1, "F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, offset: 0x%08x\n", pvt->dhar, dhar_base(pvt), - (boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt) - : f10_dhar_offset(pvt)); + (pvt->fam == 0xf) ? k8_dhar_offset(pvt) + : f10_dhar_offset(pvt)); edac_dbg(1, " DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no"); amd64_debug_display_dimm_sizes(pvt, 0); /* everything below this point is Fam10h and above */ - if (boot_cpu_data.x86 == 0xf) + if (pvt->fam == 0xf) return; amd64_debug_display_dimm_sizes(pvt, 1); @@ -738,7 +732,7 @@ static void dump_misc_regs(struct amd64_pvt *pvt) /* Only if NOT ganged does dclr1 have valid info */ if (!dct_ganging_enabled(pvt)) - amd64_dump_dramcfg_low(pvt->dclr1, 1); + amd64_dump_dramcfg_low(pvt, pvt->dclr1, 1); } /* @@ -777,7 +771,7 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) edac_dbg(0, " DCSB0[%d]=0x%08x reg: F2x%x\n", cs, *base0, reg0); - if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt)) + if (pvt->fam == 0xf || dct_ganging_enabled(pvt)) continue; if (!amd64_read_dct_pci_cfg(pvt, reg1, base1)) @@ -795,7 +789,7 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) edac_dbg(0, " DCSM0[%d]=0x%08x reg: F2x%x\n", cs, *mask0, reg0); - if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt)) + if (pvt->fam == 0xf || dct_ganging_enabled(pvt)) continue; if (!amd64_read_dct_pci_cfg(pvt, reg1, mask1)) @@ -809,9 +803,9 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt, int cs) enum mem_type type; /* F15h supports only DDR3 */ - if (boot_cpu_data.x86 >= 0x15) + if (pvt->fam >= 0x15) type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3; - else if (boot_cpu_data.x86 == 0x10 || pvt->ext_model >= K8_REV_F) { + else if (pvt->fam == 0x10 || pvt->ext_model >= K8_REV_F) { if (pvt->dchr0 & DDR3_MODE) type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3; else @@ -844,14 +838,13 @@ static int k8_early_channel_count(struct amd64_pvt *pvt) } /* On F10h and later ErrAddr is MC4_ADDR[47:1] */ -static u64 get_error_address(struct mce *m) +static u64 get_error_address(struct amd64_pvt *pvt, struct mce *m) { - struct cpuinfo_x86 *c = &boot_cpu_data; u64 addr; u8 start_bit = 1; u8 end_bit = 47; - if (c->x86 == 0xf) { + if (pvt->fam == 0xf) { start_bit = 3; end_bit = 39; } @@ -861,7 +854,7 @@ static u64 get_error_address(struct mce *m) /* * Erratum 637 workaround */ - if (c->x86 == 0x15) { + if (pvt->fam == 0x15) { struct amd64_pvt *pvt; u64 cc6_base, tmp_addr; u32 tmp; @@ -1100,7 +1093,7 @@ static int f1x_early_channel_count(struct amd64_pvt *pvt) int i, j, channels = 0; /* On F10h, if we are in 128 bit mode, then we are using 2 channels */ - if (boot_cpu_data.x86 == 0x10 && (pvt->dclr0 & WIDTH_128)) + if (pvt->fam == 0x10 && (pvt->dclr0 & WIDTH_128)) return 2; /* @@ -1201,7 +1194,7 @@ static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, static void read_dram_ctl_register(struct amd64_pvt *pvt) { - if (boot_cpu_data.x86 == 0xf) + if (pvt->fam == 0xf) return; if (!amd64_read_dct_pci_cfg(pvt, DCT_SEL_LO, &pvt->dct_sel_lo)) { @@ -1422,11 +1415,9 @@ static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr) { u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr; - if (boot_cpu_data.x86 == 0x10) { + if (pvt->fam == 0x10) { /* only revC3 and revE have that feature */ - if (boot_cpu_data.x86_model < 4 || - (boot_cpu_data.x86_model < 0xa && - boot_cpu_data.x86_mask < 3)) + if (pvt->model < 4 || (pvt->model < 0xa && pvt->stepping < 3)) return sys_addr; } @@ -1714,7 +1705,7 @@ static void amd64_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases; u32 dbam = ctrl ? pvt->dbam1 : pvt->dbam0; - if (boot_cpu_data.x86 == 0xf) { + if (pvt->fam == 0xf) { /* K8 families < revF not supported yet */ if (pvt->ext_model < K8_REV_F) return; @@ -2031,7 +2022,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, memset(&err, 0, sizeof(err)); - sys_addr = get_error_address(m); + sys_addr = get_error_address(pvt, m); if (ecc_type == 2) err.syndrome = extract_syndrome(m->status); @@ -2092,10 +2083,9 @@ static void free_mc_sibling_devs(struct amd64_pvt *pvt) */ static void read_mc_regs(struct amd64_pvt *pvt) { - struct cpuinfo_x86 *c = &boot_cpu_data; + unsigned range; u64 msr_val; u32 tmp; - unsigned range; /* * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since @@ -2156,14 +2146,14 @@ static void read_mc_regs(struct amd64_pvt *pvt) pvt->ecc_sym_sz = 4; - if (c->x86 >= 0x10) { + if (pvt->fam >= 0x10) { amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp); - if (c->x86 != 0x16) + if (pvt->fam != 0x16) /* F16h has only DCT0 */ amd64_read_dct_pci_cfg(pvt, DBAM1, &pvt->dbam1); /* F10h, revD and later can do x8 ECC too */ - if ((c->x86 > 0x10 || c->x86_model > 7) && tmp & BIT(25)) + if ((pvt->fam > 0x10 || pvt->model > 7) && tmp & BIT(25)) pvt->ecc_sym_sz = 8; } dump_misc_regs(pvt); @@ -2257,7 +2247,7 @@ static int init_csrows(struct mem_ctl_info *mci) bool row_dct0 = !!csrow_enabled(i, 0, pvt); bool row_dct1 = false; - if (boot_cpu_data.x86 != 0xf) + if (pvt->fam != 0xf) row_dct1 = !!csrow_enabled(i, 1, pvt); if (!row_dct0 && !row_dct1) @@ -2275,7 +2265,7 @@ static int init_csrows(struct mem_ctl_info *mci) } /* K8 has only one DCT */ - if (boot_cpu_data.x86 != 0xf && row_dct1) { + if (pvt->fam != 0xf && row_dct1) { int row_dct1_pages = amd64_csrow_nr_pages(pvt, 1, i); csrow->channels[1]->dimm->nr_pages = row_dct1_pages; @@ -2504,13 +2494,14 @@ static bool ecc_enabled(struct pci_dev *F3, u16 nid) static int set_mc_sysfs_attrs(struct mem_ctl_info *mci) { + struct amd64_pvt *pvt = mci->pvt_info; int rc; rc = amd64_create_sysfs_dbg_files(mci); if (rc < 0) return rc; - if (boot_cpu_data.x86 >= 0x10) { + if (pvt->fam >= 0x10) { rc = amd64_create_sysfs_inject_files(mci); if (rc < 0) return rc; @@ -2521,9 +2512,11 @@ static int set_mc_sysfs_attrs(struct mem_ctl_info *mci) static void del_mc_sysfs_attrs(struct mem_ctl_info *mci) { + struct amd64_pvt *pvt = mci->pvt_info; + amd64_remove_sysfs_dbg_files(mci); - if (boot_cpu_data.x86 >= 0x10) + if (pvt->fam >= 0x10) amd64_remove_sysfs_inject_files(mci); } @@ -2561,6 +2554,7 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) struct amd64_family_type *fam_type = NULL; pvt->ext_model = boot_cpu_data.x86_model >> 4; + pvt->stepping = boot_cpu_data.x86_mask; pvt->model = boot_cpu_data.x86_model; pvt->fam = boot_cpu_data.x86; @@ -2757,6 +2751,8 @@ static void amd64_remove_one_instance(struct pci_dev *pdev) struct ecc_settings *s = ecc_stngs[nid]; mci = find_mci_by_dev(&pdev->dev); + WARN_ON(!mci); + del_mc_sysfs_attrs(mci); /* Remove from EDAC CORE tracking list */ mci = edac_mc_del_mc(&pdev->dev); diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 8fddad7b3b95..d2443cfa0698 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -348,7 +348,9 @@ struct amd64_pvt { u16 mc_node_id; /* MC index of this MC node */ u8 fam; /* CPU family */ - u8 model; /* CPU model */ + u8 model; /* ... model */ + u8 stepping; /* ... stepping */ + int ext_model; /* extended model value of this node */ int channel_count; -- cgit v1.2.3