From 41fd60fa74d6aac84c214afc71aa4b9d3edba263 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 22 Jun 2018 20:17:49 -0700 Subject: net: pch_gbe: Remove PCH_GBE_MAC_IFOP_RGMII define The pch_gbe driver currently presumes that the PHY is connected using RGMII, and would need further work to support other buses. It includes a define which is always set that conditionalises some of the RGMII-specific code regardless. Remove it. If we do ever support different MII buses then preprocessor defines won't be the best way to select between them anyway. Signed-off-by: Paul Burton Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 9 --------- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h | 1 - 2 files changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 5846e8cf1750..11c42aa42b8a 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -366,9 +366,7 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) /* Read the MAC address. and store to the private data */ pch_gbe_mac_read_mac_addr(hw); iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET); -#ifdef PCH_GBE_MAC_IFOP_RGMII iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE); -#endif pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST); /* Setup the receive addresses */ pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); @@ -776,9 +774,7 @@ void pch_gbe_reset(struct pch_gbe_adapter *adapter) } pch_gbe_phy_init_setting(hw); /* Setup Mac interface option RGMII */ -#ifdef PCH_GBE_MAC_IFOP_RGMII pch_gbe_phy_set_rgmii(hw); -#endif } /** @@ -1044,7 +1040,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed, unsigned long rgmii = 0; /* Set the RGMII control. */ -#ifdef PCH_GBE_MAC_IFOP_RGMII switch (speed) { case SPEED_10: rgmii = (PCH_GBE_RGMII_RATE_2_5M | @@ -1060,10 +1055,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed, break; } iowrite32(rgmii, &hw->reg->RGMII_CTRL); -#else /* GMII */ - rgmii = 0; - iowrite32(rgmii, &hw->reg->RGMII_CTRL); -#endif } static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed, u16 duplex) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h index efb955be8cac..23ac38711619 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h @@ -21,7 +21,6 @@ #define PCH_GBE_PHY_REGS_LEN 32 #define PCH_GBE_PHY_RESET_DELAY_US 10 -#define PCH_GBE_MAC_IFOP_RGMII s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw); s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data); -- cgit v1.2.3