From 42ed893d8011264f9945c2f54055b47c298ac53e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:15:39 -0500 Subject: [libata] sata_mv: Tighten up interrupt masking in mv_qc_issue() so that it doesn't miss any protocols. Handle future cases where a qc is specially marked for polled issue or where a particular chip version prefers interrupts over polling for PIO. This mimics the polling decision logic from ata_sff_qc_issue(). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3bfe721ba766..b74af945a2fe 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1809,7 +1809,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; - unsigned int port_irqs = DONE_IRQ | ERR_IRQ; + unsigned int port_irqs; switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -1842,20 +1842,28 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) "this may fail due to h/w errata\n"); } /* drop through */ + case ATA_PROT_NODATA: case ATAPI_PROT_PIO: - port_irqs = ERR_IRQ; /* leave DONE_IRQ masked for PIO */ - /* drop through */ - default: - /* - * We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_edma(ap); - mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); - mv_pmp_select(ap, qc->dev->link->pmp); - return ata_sff_qc_issue(qc); + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ + + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); + return ata_sff_qc_issue(qc); } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) -- cgit v1.2.3