From 48f16c9bef8ee6b699ab8e7c5c55920ddd1c7e8f Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 12 Nov 2014 16:11:50 +1100 Subject: ncr5380: Remove unused macros Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER; and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP serves no purpose anymore. Remove these macro definitions. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Michael Schmitz Signed-off-by: Christoph Hellwig --- drivers/scsi/NCR5380.c | 2 +- drivers/scsi/arm/oak.c | 1 - drivers/scsi/atari_scsi.h | 1 - drivers/scsi/g_NCR5380.c | 5 ----- drivers/scsi/g_NCR5380.h | 1 - drivers/scsi/mac_scsi.c | 3 --- drivers/scsi/pas16.c | 5 ----- drivers/scsi/sun3_scsi.c | 15 --------------- drivers/scsi/sun3_scsi.h | 1 - drivers/scsi/t128.c | 5 ----- 10 files changed, 1 insertion(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 296c6f53605a..048bc02556cb 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -649,7 +649,7 @@ NCR5380_print_options(struct Scsi_Host *instance) " UNSAFE " #endif ); - printk(" USLEEP, USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP); + printk(" USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP); printk(" generic release=%d", NCR5380_PUBLIC_RELEASE); if (((struct NCR5380_hostdata *) instance->hostdata)->flags & FLAG_NCR53C400) { printk(" ncr53c400 release=%d", NCR53C400_PUBLIC_RELEASE); diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index 188e734c7ff0..5ba3db605000 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -29,7 +29,6 @@ #define NCR5380_read(reg) readb(_base + ((reg) << 2)) #define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2)) -#define NCR5380_intr oakscsi_intr #define NCR5380_queue_command oakscsi_queue_command #define NCR5380_show_info oakscsi_show_info #define NCR5380_write_info oakscsi_write_info diff --git a/drivers/scsi/atari_scsi.h b/drivers/scsi/atari_scsi.h index 3299d91d7336..58cc32f79b86 100644 --- a/drivers/scsi/atari_scsi.h +++ b/drivers/scsi/atari_scsi.h @@ -44,7 +44,6 @@ #define NCR5380_read(reg) atari_scsi_reg_read( reg ) #define NCR5380_write(reg, value) atari_scsi_reg_write( reg, value ) -#define NCR5380_intr atari_scsi_intr #define NCR5380_queue_command atari_scsi_queue_command #define NCR5380_abort atari_scsi_abort #define NCR5380_show_info atari_scsi_show_info diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index b331272e93bc..eeb8da5b2d4a 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -44,10 +44,6 @@ * * PARITY - enable parity checking. Not supported. * - * SCSI2 - enable support for SCSI-II tagged queueing. Untested. - * - * USLEEP - enable support for devices that don't disconnect. Untested. - * * The card is detected and initialized in one of several ways : * 1. With command line overrides - NCR5380=port,irq may be * used on the LILO command line to override the defaults. @@ -79,7 +75,6 @@ */ /* settings for DTC3181E card with only Mustek scanner attached */ -#define USLEEP #define USLEEP_POLL 1 #define USLEEP_SLEEP 20 #define USLEEP_WAITLONG 500 diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h index 703adf78e0b2..fb530027a889 100644 --- a/drivers/scsi/g_NCR5380.h +++ b/drivers/scsi/g_NCR5380.h @@ -118,7 +118,6 @@ static const char* generic_NCR5380_info(struct Scsi_Host *); #define NCR5380_bus_reset generic_NCR5380_bus_reset #define NCR5380_pread generic_NCR5380_pread #define NCR5380_pwrite generic_NCR5380_pwrite -#define NCR5380_proc_info notyet_generic_proc_info #define BOARD_NCR5380 0 #define BOARD_NCR53C400 1 diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index dc774959cc20..579a3d4177f6 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -55,7 +55,6 @@ #include "NCR5380.h" #define RESET_BOOT -#define DRIVER_SETUP extern void via_scsi_clear(void); @@ -113,7 +112,6 @@ static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int va */ static int __init mac_scsi_setup(char *str) { -#ifdef DRIVER_SETUP int ints[7]; (void)get_options( str, ARRAY_SIZE(ints), ints); @@ -166,7 +164,6 @@ static int __init mac_scsi_setup(char *str) { } #endif /* SUPPORT_TAGS */ -#endif /* DRIVER_SETUP */ return 1; } diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index f4a1014cbe0a..77c81766dfaa 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -1,6 +1,5 @@ #define AUTOSENSE #define PSEUDO_DMA -#define FOO #define UNSAFE /* Not unsafe for PAS16 -- use it */ #define PDEBUG 0 @@ -52,8 +51,6 @@ * increase compared to polled I/O. * * PARITY - enable parity checking. Not supported. - * - * SCSI2 - enable support for SCSI-II tagged queueing. Untested. * * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. This * parameter comes from the NCR5380 code. It is NOT unsafe with @@ -63,8 +60,6 @@ * want to use UNSAFE you can try defining LIMIT_TRANSFERSIZE or * twiddle with the transfer size in the high level code. * - * USLEEP - enable support for devices that don't disconnect. Untested. - * * The card is detected and initialized in one of several ways : * 1. Autoprobe (default) - There are many different models of * the Pro Audio Spectrum/Studio 16, and I only have one of diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index cd4bf3a5faaa..a6fe27b21dba 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -43,10 +43,6 @@ * Options : * * PARITY - enable parity checking. Not supported. - * - * SCSI2 - enable support for SCSI-II tagged queueing. Untested. - * - * USLEEP - enable support for devices that don't disconnect. Untested. */ #define AUTOSENSE @@ -79,18 +75,7 @@ extern int sun3_map_test(unsigned long, char *); -#define USE_WRAPPER /*#define RESET_BOOT */ -#define DRIVER_SETUP - -/* - * BUG can be used to trigger a strange code-size related hang on 2.1 kernels - */ -#ifdef BUG -#undef RESET_BOOT -#undef DRIVER_SETUP -#endif - /* #define SUPPORT_TAGS */ #ifdef SUN3_SCSI_VME diff --git a/drivers/scsi/sun3_scsi.h b/drivers/scsi/sun3_scsi.h index 848148c16a52..4846c324ea76 100644 --- a/drivers/scsi/sun3_scsi.h +++ b/drivers/scsi/sun3_scsi.h @@ -89,7 +89,6 @@ static int sun3scsi_release (struct Scsi_Host *); #define NCR5380_read(reg) sun3scsi_read(reg) #define NCR5380_write(reg, value) sun3scsi_write(reg, value) -#define NCR5380_intr sun3scsi_intr #define NCR5380_queue_command sun3scsi_queue_command #define NCR5380_bus_reset sun3scsi_bus_reset #define NCR5380_abort sun3scsi_abort diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index 09556ebe1da1..e5acd9eb3148 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -47,17 +47,12 @@ * increase compared to polled I/O. * * PARITY - enable parity checking. Not supported. - * - * SCSI2 - enable support for SCSI-II tagged queueing. Untested. - * * * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You * only really want to use this if you're having a problem with * dropped characters during high speed communications, and even * then, you're going to be better off twiddling with transfersize. * - * USLEEP - enable support for devices that don't disconnect. Untested. - * * The card is detected and initialized in one of several ways : * 1. Autoprobe (default) - since the board is memory mapped, * a BIOS signature is scanned for to locate the registers. -- cgit v1.2.3