From ad28e02420beae459bf48be14de5de1d76e79704 Mon Sep 17 00:00:00 2001 From: Joseph Greathouse Date: Wed, 17 Jul 2019 11:55:22 -0500 Subject: drm/amdgpu: Default disable GDS for compute VMIDs The GDS and GWS blocks default to allowing all VMIDs to access all entries. Graphics VMIDs can handle setting these limits when the driver launches work. However, compute workloads under HWS control don't go through the kernel driver. Instead, HWS firmware should set these limits when a process is put into a VMID slot. Disable access to these devices by default by turning off all mask bits (for OA) and setting BASE=SIZE=0 (for GDS and GWS) for all compute VMIDs. If a process wants to use these resources, they can request this from the HWS firmware (when such capabilities are enabled). HWS will then handle setting the base and limit for the process when it is assigned to a VMID. This will also prevent user kernels from getting 'stuck' in GWS by accident if they write GWS-using code but HWS firmware is not set up to handle GWS reset. Until HWS is enabled to handle GWS properly, all GWS accesses will MEM_VIOL fault the kernel. v2: Move initialization outside of SRBM mutex Signed-off-by: Joseph Greathouse Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 9 +++++++++ drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 9 +++++++++ drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 9 +++++++++ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 9 +++++++++ 4 files changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 1675d5837c3c..3df50c9c2fb0 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -1441,6 +1441,15 @@ static void gfx_v10_0_init_compute_vmid(struct amdgpu_device *adev) } nv_grbm_select(adev, 0, 0, 0, 0); mutex_unlock(&adev->srbm_mutex); + + /* Initialize all compute VMIDs to have no GDS, GWS, or OA + acccess. These should be enabled by FW for target VMIDs. */ + for (i = FIRST_COMPUTE_VMID; i < LAST_COMPUTE_VMID; i++) { + WREG32_SOC15_OFFSET(GC, 0, mmGDS_VMID0_BASE, 2 * i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_VMID0_SIZE, 2 * i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_GWS_VMID0, i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_OA_VMID0, i, 0); + } } static void gfx_v10_0_tcp_harvest(struct amdgpu_device *adev) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c index 0db9f488da7e..21187275dfd3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c @@ -1879,6 +1879,15 @@ static void gfx_v7_0_init_compute_vmid(struct amdgpu_device *adev) } cik_srbm_select(adev, 0, 0, 0, 0); mutex_unlock(&adev->srbm_mutex); + + /* Initialize all compute VMIDs to have no GDS, GWS, or OA + acccess. These should be enabled by FW for target VMIDs. */ + for (i = FIRST_COMPUTE_VMID; i < LAST_COMPUTE_VMID; i++) { + WREG32(amdgpu_gds_reg_offset[i].mem_base, 0); + WREG32(amdgpu_gds_reg_offset[i].mem_size, 0); + WREG32(amdgpu_gds_reg_offset[i].gws, 0); + WREG32(amdgpu_gds_reg_offset[i].oa, 0); + } } static void gfx_v7_0_config_init(struct amdgpu_device *adev) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 5f401b41ef7c..751567f78567 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -3706,6 +3706,15 @@ static void gfx_v8_0_init_compute_vmid(struct amdgpu_device *adev) } vi_srbm_select(adev, 0, 0, 0, 0); mutex_unlock(&adev->srbm_mutex); + + /* Initialize all compute VMIDs to have no GDS, GWS, or OA + acccess. These should be enabled by FW for target VMIDs. */ + for (i = FIRST_COMPUTE_VMID; i < LAST_COMPUTE_VMID; i++) { + WREG32(amdgpu_gds_reg_offset[i].mem_base, 0); + WREG32(amdgpu_gds_reg_offset[i].mem_size, 0); + WREG32(amdgpu_gds_reg_offset[i].gws, 0); + WREG32(amdgpu_gds_reg_offset[i].oa, 0); + } } static void gfx_v8_0_config_init(struct amdgpu_device *adev) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index f4c4eea62526..1cf639a51178 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -1918,6 +1918,15 @@ static void gfx_v9_0_init_compute_vmid(struct amdgpu_device *adev) } soc15_grbm_select(adev, 0, 0, 0, 0); mutex_unlock(&adev->srbm_mutex); + + /* Initialize all compute VMIDs to have no GDS, GWS, or OA + acccess. These should be enabled by FW for target VMIDs. */ + for (i = FIRST_COMPUTE_VMID; i < LAST_COMPUTE_VMID; i++) { + WREG32_SOC15_OFFSET(GC, 0, mmGDS_VMID0_BASE, 2 * i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_VMID0_SIZE, 2 * i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_GWS_VMID0, i, 0); + WREG32_SOC15_OFFSET(GC, 0, mmGDS_OA_VMID0, i, 0); + } } static void gfx_v9_0_constants_init(struct amdgpu_device *adev) -- cgit v1.2.3 From 23d66e75d7c75f108754297f6eae77348a7cd544 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Wed, 17 Jul 2019 16:32:27 +0800 Subject: drm/amd/powerplay: report bootup clock as max supported on dpm disabled With gfxclk or uclk dpm disabled, it's reasonable to report bootup clock as the max supported. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index f1565c448de5..768aae2e20da 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -137,12 +137,37 @@ int smu_get_dpm_freq_range(struct smu_context *smu, enum smu_clk_type clk_type, { int ret = 0, clk_id = 0; uint32_t param = 0; + uint32_t clock_limit; if (!min && !max) return -EINVAL; - if (!smu_clk_dpm_is_enabled(smu, clk_type)) + if (!smu_clk_dpm_is_enabled(smu, clk_type)) { + switch (clk_type) { + case SMU_MCLK: + case SMU_UCLK: + clock_limit = smu->smu_table.boot_values.uclk; + break; + case SMU_GFXCLK: + case SMU_SCLK: + clock_limit = smu->smu_table.boot_values.gfxclk; + break; + case SMU_SOCCLK: + clock_limit = smu->smu_table.boot_values.socclk; + break; + default: + clock_limit = 0; + break; + } + + /* clock in Mhz unit */ + if (min) + *min = clock_limit / 100; + if (max) + *max = clock_limit / 100; + return 0; + } mutex_lock(&smu->mutex); clk_id = smu_clk_get_index(smu, clk_type); -- cgit v1.2.3 From 5f872b723a451a26ad0f1d29541df9de5d23529d Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Thu, 18 Jul 2019 12:49:15 +0800 Subject: drm/amdgpu: do not create ras debugfs/sysfs node for ASICs that don't have ras ability driver shouldn't init any ras debugfs/sysfs node for ASICs that don't have ras hardware ability Signed-off-by: Hawking Zhang Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index 1a4412e47810..3a9ece450b31 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -1557,6 +1557,12 @@ int amdgpu_ras_init(struct amdgpu_device *adev) amdgpu_ras_check_supported(adev, &con->hw_supported, &con->supported); + if (!con->hw_supported) { + amdgpu_ras_set_context(adev, NULL); + kfree(con); + return 0; + } + con->features = 0; INIT_LIST_HEAD(&con->head); /* Might need get this flag from vbios. */ -- cgit v1.2.3 From 59d9c0ab7169346d53b12db6a5e986a26a28c479 Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Thu, 18 Jul 2019 12:52:56 +0800 Subject: drm/amdgpu: disable GFX RAS by default GFX RAS has not been stablized yet. disable GFX ras until it is fully funcitonal. Signed-off-by: Hawking Zhang Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index f2e8b4238efd..5376328d3fd0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -148,7 +148,7 @@ struct amdgpu_mgpu_info mgpu_info = { .mutex = __MUTEX_INITIALIZER(mgpu_info.mutex), }; int amdgpu_ras_enable = -1; -uint amdgpu_ras_mask = 0xffffffff; +uint amdgpu_ras_mask = 0xfffffffb; /** * DOC: vramlimit (int) -- cgit v1.2.3 From 29bd650809225f51ba475c556f43e53e392c44e3 Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Thu, 18 Jul 2019 13:59:38 +0800 Subject: drm/amdgpu: only allow error injection to UMC IP block error injection to other IP blocks (except UMC) will be enabled until RAS feature stablize on those IP blocks Signed-off-by: Hawking Zhang Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index 3a9ece450b31..fc346eb1aacd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -689,6 +689,12 @@ int amdgpu_ras_error_inject(struct amdgpu_device *adev, if (!obj) return -EINVAL; + if (block_info.block_id != TA_RAS_BLOCK__UMC) { + DRM_INFO("%s error injection is not supported yet\n", + ras_block_str(info->head.block)); + return -EINVAL; + } + ret = psp_ras_trigger_error(&adev->psp, &block_info); if (ret) DRM_ERROR("RAS ERROR: inject %s error failed ret %d\n", -- cgit v1.2.3 From 578a4daa1cd61f9783b5d0f566d6ec0a2cb9f6a3 Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Thu, 18 Jul 2019 16:03:46 +0800 Subject: drm/amdgpu: drop ras self test this function is not needed any more. error injection is the only way to validate ras but it can't be executed in amdgpu_ras_init, where gpu is even not initialized Signed-off-by: Hawking Zhang Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index fc346eb1aacd..fac7aa2c244f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -136,11 +136,6 @@ static int amdgpu_ras_reserve_vram(struct amdgpu_device *adev, static int amdgpu_ras_release_vram(struct amdgpu_device *adev, struct amdgpu_bo **bo_ptr); -static void amdgpu_ras_self_test(struct amdgpu_device *adev) -{ - /* TODO */ -} - static ssize_t amdgpu_ras_debugfs_read(struct file *f, char __user *buf, size_t size, loff_t *pos) { @@ -1582,8 +1577,6 @@ int amdgpu_ras_init(struct amdgpu_device *adev) if (amdgpu_ras_fs_init(adev)) goto fs_out; - amdgpu_ras_self_test(adev); - DRM_INFO("RAS INFO: ras initialized successfully, " "hardware ability[%x] ras_mask[%x]\n", con->hw_supported, con->supported); -- cgit v1.2.3 From 1a195ed5f197fcfd1d99ceedd469857fcd7d8c4f Mon Sep 17 00:00:00 2001 From: Kevin Wang Date: Thu, 18 Jul 2019 15:46:55 +0800 Subject: drm/amd/powerplay: change sysfs pp_dpm_xxx format for navi10 v2: set average clock value on level 1 when current clock equal min or max clock (fine grained dpm support). the navi10 gfxclk (sclk) support fine grained DPM, so use level 1 to show current dpm freq in sysfs pp_dpm_xxx Signed-off-by: Kevin Wang Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 47 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 2dae0ae0829e..8293b5216aad 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -626,11 +626,26 @@ static int navi10_get_current_clk_freq_by_table(struct smu_context *smu, return ret; } +static bool navi10_is_support_fine_grained_dpm(struct smu_context *smu, enum smu_clk_type clk_type) +{ + PPTable_t *pptable = smu->smu_table.driver_pptable; + DpmDescriptor_t *dpm_desc = NULL; + uint32_t clk_index = 0; + + clk_index = smu_clk_get_index(smu, clk_type); + dpm_desc = &pptable->DpmDescriptor[clk_index]; + + /* 0 - Fine grained DPM, 1 - Discrete DPM */ + return dpm_desc->SnapToDiscrete == 0 ? true : false; +} + static int navi10_print_clk_levels(struct smu_context *smu, enum smu_clk_type clk_type, char *buf) { int i, size = 0, ret = 0; uint32_t cur_value = 0, value = 0, count = 0; + uint32_t freq_values[3] = {0}; + uint32_t mark_index = 0; switch (clk_type) { case SMU_GFXCLK: @@ -643,22 +658,42 @@ static int navi10_print_clk_levels(struct smu_context *smu, ret = smu_get_current_clk_freq(smu, clk_type, &cur_value); if (ret) return size; + /* 10KHz -> MHz */ cur_value = cur_value / 100; - size += sprintf(buf, "current clk: %uMhz\n", cur_value); - ret = smu_get_dpm_level_count(smu, clk_type, &count); if (ret) return size; - for (i = 0; i < count; i++) { - ret = smu_get_dpm_freq_by_index(smu, clk_type, i, &value); + if (!navi10_is_support_fine_grained_dpm(smu, clk_type)) { + for (i = 0; i < count; i++) { + ret = smu_get_dpm_freq_by_index(smu, clk_type, i, &value); + if (ret) + return size; + + size += sprintf(buf + size, "%d: %uMhz %s\n", i, value, + cur_value == value ? "*" : ""); + } + } else { + ret = smu_get_dpm_freq_by_index(smu, clk_type, 0, &freq_values[0]); + if (ret) + return size; + ret = smu_get_dpm_freq_by_index(smu, clk_type, count - 1, &freq_values[2]); if (ret) return size; - size += sprintf(buf + size, "%d: %uMhz %s\n", i, value, - cur_value == value ? "*" : ""); + freq_values[1] = cur_value; + mark_index = cur_value == freq_values[0] ? 0 : + cur_value == freq_values[2] ? 2 : 1; + if (mark_index != 1) + freq_values[1] = (freq_values[0] + freq_values[2]) / 2; + + for (i = 0; i < 3; i++) { + size += sprintf(buf + size, "%d: %uMhz %s\n", i, freq_values[i], + i == mark_index ? "*" : ""); + } + } break; default: -- cgit v1.2.3 From 3457b3055e43fbe457d9779c1362d56f19a888e7 Mon Sep 17 00:00:00 2001 From: Fuqian Huang Date: Thu, 11 Jul 2019 11:10:21 +0800 Subject: drm/ttm: use the same attributes when freeing d_page->vaddr In function __ttm_dma_alloc_page(), d_page->addr is allocated by dma_alloc_attrs() but freed with use dma_free_coherent() in __ttm_dma_free_page(). Use the correct dma_free_attrs() to free d_page->vaddr. Signed-off-by: Fuqian Huang Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/ttm/ttm_page_alloc_dma.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c index d594f7520b7b..7d78e6deac89 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c @@ -285,9 +285,13 @@ static int ttm_set_pages_caching(struct dma_pool *pool, static void __ttm_dma_free_page(struct dma_pool *pool, struct dma_page *d_page) { + unsigned long attrs = 0; dma_addr_t dma = d_page->dma; d_page->vaddr &= ~VADDR_FLAG_HUGE_POOL; - dma_free_coherent(pool->dev, pool->size, (void *)d_page->vaddr, dma); + if (pool->type & IS_HUGE) + attrs = DMA_ATTR_NO_WARN; + + dma_free_attrs(pool->dev, pool->size, (void *)d_page->vaddr, dma, attrs); kfree(d_page); d_page = NULL; -- cgit v1.2.3 From c6d5245d41de3a9786707b34189c41d6412fd0ba Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Thu, 18 Jul 2019 11:38:46 -0400 Subject: drm/amdgpu: use VCN firmware offset for cache window Since we are using the signed FW now, and also using PSP firmware loading, but it's still potential to break driver when loading FW directly instead of PSP, so we should add offset. Signed-off-by: Leo Liu Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c index 988c0adaca91..1cfc2620b2dd 100644 --- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c @@ -372,11 +372,8 @@ static void vcn_v2_0_mc_resume(struct amdgpu_device *adev) WREG32_SOC15(UVD, 0, mmUVD_LMI_VCPU_CACHE_64BIT_BAR_HIGH, upper_32_bits(adev->vcn.gpu_addr)); offset = size; - /* No signed header for now from firmware WREG32_SOC15(UVD, 0, mmUVD_VCPU_CACHE_OFFSET0, AMDGPU_UVD_FIRMWARE_OFFSET >> 3); - */ - WREG32_SOC15(UVD, 0, mmUVD_VCPU_CACHE_OFFSET0, 0); } WREG32_SOC15(UVD, 0, mmUVD_VCPU_CACHE_SIZE0, size); -- cgit v1.2.3 From 61f33f6aa88388e36ff8ef27a40b4a173c1511d1 Mon Sep 17 00:00:00 2001 From: Jun Lei Date: Fri, 31 May 2019 15:14:13 -0400 Subject: drm/amd/display: initialize p_state to proper value [why] On some modes SMU will be in infinite loop state at boot, this is because driver assumes p_state_support is false, but this is the opposite of the assumed boot state by SMU. we optimize away notifying SMU about no pstate, and so they will get stuck [how] when we init clk manager, init pstate to true, so it matches driver load assumption Signed-off-by: Jun Lei Reviewed-by: Tony Cheng Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c index 08a774fc7b67..740f5db22bb5 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c @@ -301,6 +301,8 @@ void dcn2_update_clocks_fpga(struct clk_mgr *clk_mgr, void dcn2_init_clocks(struct clk_mgr *clk_mgr) { memset(&(clk_mgr->clks), 0, sizeof(struct dc_clocks)); + // Assumption is that boot state always supports pstate + clk_mgr->clks.p_state_change_support = true; } void dcn2_enable_pme_wa(struct clk_mgr *clk_mgr_base) -- cgit v1.2.3 From 0bd8ac7ed5f9a1a26c722c6cdbc4cb178d36cc03 Mon Sep 17 00:00:00 2001 From: Jun Lei Date: Mon, 3 Jun 2019 08:13:12 -0400 Subject: drm/amd/display: fix up HUBBUB hw programming for VM [why] Some values were not being converted or bit-shifted properly for HW registers, causing black screen [how] Fix up the values before programming HW Signed-off-by: Jun Lei Reviewed-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c | 17 ++++++++--------- drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 4 ++-- 2 files changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c index ece6e136437b..c72a9ff57f15 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c @@ -366,25 +366,24 @@ int hubbub2_init_dchub_sys_ctx(struct hubbub *hubbub, struct dcn_vmid_page_table_config phys_config; REG_SET(DCN_VM_FB_LOCATION_BASE, 0, - FB_BASE, pa_config->system_aperture.fb_base); + FB_BASE, pa_config->system_aperture.fb_base >> 24); REG_SET(DCN_VM_FB_LOCATION_TOP, 0, - FB_TOP, pa_config->system_aperture.fb_top); + FB_TOP, pa_config->system_aperture.fb_top >> 24); REG_SET(DCN_VM_FB_OFFSET, 0, - FB_OFFSET, pa_config->system_aperture.fb_offset); + FB_OFFSET, pa_config->system_aperture.fb_offset >> 24); REG_SET(DCN_VM_AGP_BOT, 0, - AGP_BOT, pa_config->system_aperture.agp_bot); + AGP_BOT, pa_config->system_aperture.agp_bot >> 24); REG_SET(DCN_VM_AGP_TOP, 0, - AGP_TOP, pa_config->system_aperture.agp_top); + AGP_TOP, pa_config->system_aperture.agp_top >> 24); REG_SET(DCN_VM_AGP_BASE, 0, - AGP_BASE, pa_config->system_aperture.agp_base); + AGP_BASE, pa_config->system_aperture.agp_base >> 24); if (pa_config->gart_config.page_table_start_addr != pa_config->gart_config.page_table_end_addr) { - phys_config.depth = 1; - phys_config.block_size = 4096; phys_config.page_table_start_addr = pa_config->gart_config.page_table_start_addr >> 12; phys_config.page_table_end_addr = pa_config->gart_config.page_table_end_addr >> 12; phys_config.page_table_base_addr = pa_config->gart_config.page_table_base_addr; - + phys_config.depth = 0; + phys_config.block_size = 0; // Init VMID 0 based on PA config dcn20_vmid_setup(&hubbub1->vmid[0], &phys_config); } diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h index 959f5b654611..1ea505f7a05a 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h @@ -61,8 +61,8 @@ enum dcn_hubbub_page_table_depth { }; enum dcn_hubbub_page_table_block_size { - DCN_PAGE_TABLE_BLOCK_SIZE_4KB, - DCN_PAGE_TABLE_BLOCK_SIZE_64KB + DCN_PAGE_TABLE_BLOCK_SIZE_4KB = 0, + DCN_PAGE_TABLE_BLOCK_SIZE_64KB = 4 }; struct dcn_hubbub_phys_addr_config { -- cgit v1.2.3 From 5d109be38b23c8859ec78a2ed7c254ccd569719d Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Thu, 30 May 2019 15:47:51 -0400 Subject: drm/amd/display: fix dsc disable A regression caused dsc to never get disabled in certain situations. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Nikola Cornij Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index 0b84a322b8a2..94f2f9fc6956 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -1740,8 +1740,11 @@ static void dcn20_reset_back_end_for_pipe( else if (pipe_ctx->stream_res.audio) { dc->hwss.disable_audio_stream(pipe_ctx, FREE_ACQUIRED_RESOURCE); } - } +#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT + else if (pipe_ctx->stream_res.dsc) + dp_set_dsc_enable(pipe_ctx, false); +#endif /* by upper caller loop, parent pipe: pipe0, will be reset last. * back end share by all pipes and will be disable only when disable -- cgit v1.2.3 From db31af12a5169f4ac26acec759c1d872eef26554 Mon Sep 17 00:00:00 2001 From: Jun Lei Date: Mon, 3 Jun 2019 11:37:44 -0400 Subject: drm/amd/display: cap DCFCLK hardmin to 507 for NV10 [why] Due to limitation in SMU/PPLIB, it is not possible to know Fmax @ Vmin for DCFCLK. This causes issues at high display configurations where extra headroom of DCFCLK can enable P-state switching [how] Use existing override logic. If override not defined, then force min = 507 Signed-off-by: Jun Lei Reviewed-by: Eric Yang Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c index d200bc3cec71..b949e202d6cb 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c @@ -2643,6 +2643,10 @@ static void update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_ if (dc->bb_overrides.min_dcfclk_mhz > 0) min_dcfclk = dc->bb_overrides.min_dcfclk_mhz; + else + // Accounting for SOC/DCF relationship, we can go as high as + // 506Mhz in Vmin. We need to code 507 since SMU will round down to 506. + min_dcfclk = 507; for (i = 0; i < num_states; i++) { int min_fclk_required_by_uclk; -- cgit v1.2.3 From 5b25e5f1a97284020abee7348427f89abdb674e8 Mon Sep 17 00:00:00 2001 From: Harmanprit Tatla Date: Tue, 4 Jun 2019 14:12:21 -0400 Subject: drm/amd/display: No audio endpoint for Dell MST display [Why] There are certain MST displays (i.e. Dell P2715Q) that although have the MST feature set to off may still report it is a branch device and a non-zero value for downstream port present. This can lead to us incorrectly classifying a dp dongle connection as being active and disabling the audio endpoint for the display. [How] Modified the placement and condition used to assign the is_branch_dev bit. Signed-off-by: Harmanprit Tatla Reviewed-by: Aric Cyr Acked-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 056be4c34a98..3e00c88bd2b6 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2230,11 +2230,18 @@ static void get_active_converter_info( link->dpcd_caps.dongle_type = DISPLAY_DONGLE_NONE; ddc_service_set_dongle_type(link->ddc, link->dpcd_caps.dongle_type); + link->dpcd_caps.is_branch_dev = false; return; } /* DPCD 0x5 bit 0 = 1, it indicate it's branch device */ - link->dpcd_caps.is_branch_dev = ds_port.fields.PORT_PRESENT; + if (ds_port.fields.PORT_TYPE == DOWNSTREAM_DP) { + link->dpcd_caps.is_branch_dev = false; + } + + else { + link->dpcd_caps.is_branch_dev = ds_port.fields.PORT_PRESENT; + } switch (ds_port.fields.PORT_TYPE) { case DOWNSTREAM_VGA: -- cgit v1.2.3 From 90bbf6374b88bdc1411fd83b24d87513ba23d519 Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Tue, 4 Jun 2019 14:48:33 -0400 Subject: drm/amd/display: Set default block_size, even in unexpected cases We're not expected to enter the default case, but not returning a default value here is incorrect. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Eric Bernstein Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c | 1 + drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c index c72a9ff57f15..6e2dbd03f9bf 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c @@ -337,6 +337,7 @@ static enum dcn_hubbub_page_table_block_size page_table_block_size_to_hw(unsigne break; default: ASSERT(false); + block_size = page_table_block_size; break; } diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h index 1ea505f7a05a..9502478c4a1b 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h @@ -62,7 +62,7 @@ enum dcn_hubbub_page_table_depth { enum dcn_hubbub_page_table_block_size { DCN_PAGE_TABLE_BLOCK_SIZE_4KB = 0, - DCN_PAGE_TABLE_BLOCK_SIZE_64KB = 4 + DCN_PAGE_TABLE_BLOCK_SIZE_64KB = 4, }; struct dcn_hubbub_phys_addr_config { -- cgit v1.2.3 From 61011e63f87fe5dd0ebff787cd78df4d7d66aec5 Mon Sep 17 00:00:00 2001 From: Nikola Cornij Date: Wed, 5 Jun 2019 14:29:47 -0400 Subject: drm/amd/display: Set one 4:2:0-related PPS field as recommended by DSC spec [why] 'second_line_offset_adj' was mistakenly left at zero, even though DSC spec v1.2a recommends setting this field to 512 for 4:2:0. [how] Set 'second_line_offset_adj' to 512 for 4:2:0 and leave at zero otherwise Signed-off-by: Nikola Cornij Reviewed-by: Eric Bernstein Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c b/drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c index 67089765780b..340ef4d41ebd 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c +++ b/drivers/gpu/drm/amd/display/dc/dsc/drm_dsc_dc.c @@ -377,6 +377,12 @@ int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg) vdsc_cfg->rc_bits = (hrd_delay * vdsc_cfg->bits_per_pixel) / 16; vdsc_cfg->initial_dec_delay = hrd_delay - vdsc_cfg->initial_xmit_delay; + /* As per DSC spec v1.2a recommendation: */ + if (vdsc_cfg->native_420) + vdsc_cfg->second_line_offset_adj = 512; + else + vdsc_cfg->second_line_offset_adj = 0; + return 0; } EXPORT_SYMBOL(drm_dsc_compute_rc_parameters); -- cgit v1.2.3 From 4a876eecf6a5bfbe05ca6358e1b6a484e27ce32f Mon Sep 17 00:00:00 2001 From: Jun Lei Date: Wed, 5 Jun 2019 10:53:40 -0400 Subject: drm/amd/display: swap system aperture high/low [why] Currently logical values are swapped in HW, causing system aperture to be undefined, so VA and PA cannot co-exist [how] program values correctly Signed-off-by: Jun Lei Reviewed-by: Yongqiang Sun Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index 94f2f9fc6956..710727e5d0f8 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -1153,8 +1153,8 @@ void dcn20_enable_plane( apt.sys_default.quad_part = 0; - apt.sys_high.quad_part = dc->vm_pa_config.system_aperture.start_addr; - apt.sys_low.quad_part = dc->vm_pa_config.system_aperture.end_addr; + apt.sys_low.quad_part = dc->vm_pa_config.system_aperture.start_addr; + apt.sys_high.quad_part = dc->vm_pa_config.system_aperture.end_addr; // Program system aperture settings pipe_ctx->plane_res.hubp->funcs->hubp_set_vm_system_aperture_settings(pipe_ctx->plane_res.hubp, &apt); -- cgit v1.2.3 From 4fc1609bcd5475a9cef1caeb10a04106f4f85fac Mon Sep 17 00:00:00 2001 From: Samson Tam Date: Tue, 4 Jun 2019 15:52:59 -0400 Subject: drm/amd/display: skip retrain in dc_link_set_preferred_link_settings() if using passive dongle [Why] Fixes issue when we have a display connected using a passive dongle and then emulate over it using a DP connection at 1 x 1.62 Ghz. System hangs because register bus returns back 0xFFFFFFFF for all register reads after setting register DIG_BE_CNTL in dcn10_link_encoder_connect_dig_be_to_fe(). Hang occurs later when trying to do a register read. [How] At the start of the emulation, dc_link_set_preferred_link_settings() and dp_retrain_link_dp_test() is called, even though it is connected using a passive dongle. Add an extra condition in dp_retrain_link_dp_test() to check for link->dongle_max_pix_clk > 0. This is the only way we know if the connection is using passive dongle so we don't retrain DP. Signed-off-by: Samson Tam Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 8dbf759eba45..435d50356bad 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -2984,8 +2984,10 @@ void dc_link_set_preferred_link_settings(struct dc *dc, /* Retrain with preferred link settings only relevant for * DP signal type + * Check for non-DP signal or if passive dongle present */ - if (!dc_is_dp_signal(link->connector_signal)) + if (!dc_is_dp_signal(link->connector_signal) || + link->dongle_max_pix_clk > 0) return; for (i = 0; i < MAX_PIPES; i++) { -- cgit v1.2.3 From 492d9ec244923420af96db6b69ad7d575859aa92 Mon Sep 17 00:00:00 2001 From: Murton Liu Date: Mon, 10 Jun 2019 17:55:28 -0400 Subject: drm/amd/display: Clock does not lower in Updateplanes [why] We reset the optimized_required in atomic_plane_disable flag immediately after it is set in atomic_plane_disconnect, causing us to never have flag set during next flip in UpdatePlanes. [how] Optimize directly after each time plane is removed. Signed-off-by: Murton Liu Reviewed-by: Tony Cheng Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index e50a696fcb5d..0c4340404e24 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -2516,6 +2516,12 @@ static void dcn10_apply_ctx_for_surface( if (removed_pipe[i]) dcn10_disable_plane(dc, &dc->current_state->res_ctx.pipe_ctx[i]); + for (i = 0; i < dc->res_pool->pipe_count; i++) + if (removed_pipe[i]) { + dc->hwss.optimize_bandwidth(dc, context); + break; + } + if (dc->hwseq->wa.DEGVIDCN10_254) hubbub1_wm_change_req_wa(dc->res_pool->hubbub); } -- cgit v1.2.3 From 7f6964c5a05e6593bda3a4bcb5581d0b72fc71cb Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 5 Jun 2019 15:02:04 -0400 Subject: drm/amd/display: Copy max_clks_by_state after dce_clk_mgr_construct [Why] For DCE110, DCE112 and DCE120 the max_clks_by_state for the clk_mgr are copied from their respective table before the call to dce_clk_mgr_construct, but then dce_clk_mgr_construct overwrites these with the dce80_max_clks_by_state. [How] Copy these after we call dce_clk_mgr_construct so we're using the right tables. Signed-off-by: Nicholas Kazlauskas Reviewed-by: David Francis Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c | 4 ++-- drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c | 4 ++-- drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c index c1a92c16535c..5cc3acccda2a 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c @@ -262,12 +262,12 @@ void dce110_clk_mgr_construct( struct dc_context *ctx, struct clk_mgr_internal *clk_mgr) { + dce_clk_mgr_construct(ctx, clk_mgr); + memcpy(clk_mgr->max_clks_by_state, dce110_max_clks_by_state, sizeof(dce110_max_clks_by_state)); - dce_clk_mgr_construct(ctx, clk_mgr); - clk_mgr->regs = &disp_clk_regs; clk_mgr->clk_mgr_shift = &disp_clk_shift; clk_mgr->clk_mgr_mask = &disp_clk_mask; diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c index 778392c73187..7c746ef1e32e 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c @@ -226,12 +226,12 @@ void dce112_clk_mgr_construct( struct dc_context *ctx, struct clk_mgr_internal *clk_mgr) { + dce_clk_mgr_construct(ctx, clk_mgr); + memcpy(clk_mgr->max_clks_by_state, dce112_max_clks_by_state, sizeof(dce112_max_clks_by_state)); - dce_clk_mgr_construct(ctx, clk_mgr); - clk_mgr->regs = &disp_clk_regs; clk_mgr->clk_mgr_shift = &disp_clk_shift; clk_mgr->clk_mgr_mask = &disp_clk_mask; diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c index 906310c3e2eb..5399b8cf6b75 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce120/dce120_clk_mgr.c @@ -127,12 +127,12 @@ static struct clk_mgr_funcs dce120_funcs = { void dce120_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_mgr) { + dce_clk_mgr_construct(ctx, clk_mgr); + memcpy(clk_mgr->max_clks_by_state, dce120_max_clks_by_state, sizeof(dce120_max_clks_by_state)); - dce_clk_mgr_construct(ctx, clk_mgr); - clk_mgr->base.dprefclk_khz = 600000; clk_mgr->base.funcs = &dce120_funcs; } -- cgit v1.2.3 From dd5d9348da02dd83dbb235e55aa0acb3f48ccc95 Mon Sep 17 00:00:00 2001 From: Wenjing Liu Date: Tue, 11 Jun 2019 18:18:36 -0400 Subject: drm/amd/display: wait for the whole frame after global unlock [why] The current code will not wait for the entire frame after global unlock. This causes dsc dynamic target bpp update corruption when there is a surface update immediately happens after this. [how] Wait for the entire whole frame after unlock before continuing the rest of stream and surface update. Signed-off-by: Wenjing Liu Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index 710727e5d0f8..e5e78aa930a6 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -1242,6 +1242,8 @@ void dcn20_pipe_control_lock_global( CRTC_STATE_VACTIVE); pipe->stream_res.tg->funcs->wait_for_state(pipe->stream_res.tg, CRTC_STATE_VBLANK); + pipe->stream_res.tg->funcs->wait_for_state(pipe->stream_res.tg, + CRTC_STATE_VACTIVE); pipe->stream_res.tg->funcs->lock_doublebuffer_disable( pipe->stream_res.tg); } -- cgit v1.2.3 From ca6f188cdf80de09b92174cf5fb2716021264222 Mon Sep 17 00:00:00 2001 From: Julian Parkin Date: Thu, 13 Jun 2019 12:49:37 -0400 Subject: drm/amd/display: Poll for GPUVM context ready (v2) [Why] Hardware docs state that we must wait until the GPUVM context is ready after programming it. [How] Poll until the valid bit of PAGE_TABLE_BASE_ADDR_LO32 is set to 1 after programming it. v2: fix include for udelay (Alex) Signed-off-by: Julian Parkin Reviewed-by: Charlene Liu Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c | 37 +++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c index 27679ef6ebe8..96c263223315 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_vmid.c @@ -23,6 +23,8 @@ * */ +#include + #include "dcn20_vmid.h" #include "reg_helper.h" @@ -36,6 +38,38 @@ #define FN(reg_name, field_name) \ vmid->shifts->field_name, vmid->masks->field_name +static void dcn20_wait_for_vmid_ready(struct dcn20_vmid *vmid) +{ + /* According the hardware spec, we need to poll for the lowest + * bit of PAGE_TABLE_BASE_ADDR_LO32 = 1 any time a GPUVM + * context is updated. We can't use REG_WAIT here since we + * don't have a seperate field to wait on. + * + * TODO: Confirm timeout / poll interval with hardware team + */ + + int max_times = 10000; + int delay_us = 5; + int i; + + for (i = 0; i < max_times; ++i) { + uint32_t entry_lo32; + + REG_GET(PAGE_TABLE_BASE_ADDR_LO32, + VM_CONTEXT0_PAGE_DIRECTORY_ENTRY_LO32, + &entry_lo32); + + if (entry_lo32 & 0x1) + return; + + udelay(delay_us); + } + + /* VM setup timed out */ + DC_LOG_WARNING("Timeout while waiting for GPUVM context update\n"); + ASSERT(0); +} + void dcn20_vmid_setup(struct dcn20_vmid *vmid, const struct dcn_vmid_page_table_config *config) { REG_SET(PAGE_TABLE_START_ADDR_HI32, 0, @@ -54,6 +88,9 @@ void dcn20_vmid_setup(struct dcn20_vmid *vmid, const struct dcn_vmid_page_table_ REG_SET(PAGE_TABLE_BASE_ADDR_HI32, 0, VM_CONTEXT0_PAGE_DIRECTORY_ENTRY_HI32, (config->page_table_base_addr >> 32) & 0xFFFFFFFF); + /* Note: per hardware spec PAGE_TABLE_BASE_ADDR_LO32 must be programmed last in sequence */ REG_SET(PAGE_TABLE_BASE_ADDR_LO32, 0, VM_CONTEXT0_PAGE_DIRECTORY_ENTRY_LO32, config->page_table_base_addr & 0xFFFFFFFF); + + dcn20_wait_for_vmid_ready(vmid); } -- cgit v1.2.3 From c7990daebe71d11a9e360b5c3b0ecd1846a3a4bb Mon Sep 17 00:00:00 2001 From: SivapiriyanKumarasamy Date: Fri, 14 Jun 2019 15:04:00 -0400 Subject: drm/amd/display: Wait for backlight programming completion in set backlight level [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy Reviewed-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c index f8903bcabe49..58bd131d5b48 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c @@ -239,6 +239,10 @@ static void dmcu_set_backlight_level( s2 |= (backlight_8_bit << ATOM_S2_CURRENT_BL_LEVEL_SHIFT); REG_WRITE(BIOS_SCRATCH_2, s2); + + /* waitDMCUReadyForCmd */ + REG_WAIT(MASTER_COMM_CNTL_REG, MASTER_COMM_INTERRUPT, + 0, 1, 80000); } static void dce_abm_init(struct abm *abm) -- cgit v1.2.3 From 288af96df16b629552c5bcc9ec0f0191c6198a72 Mon Sep 17 00:00:00 2001 From: Ilya Bakoulin Date: Wed, 29 May 2019 18:52:17 -0400 Subject: drm/amd/display: Check for valid stream_encode Before accessing it's vtable, check that stream_encoder is non-null. Signed-off-by: Ilya Bakoulin Reviewed-by: Eric Bernstein Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index af7f8be230f7..352862370390 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -612,7 +612,8 @@ bool dc_stream_set_dynamic_metadata(struct dc *dc, pipe_ctx->stream->dmdata_address = attr->address; - if (pipe_ctx->stream_res.stream_enc->funcs->set_dynamic_metadata != NULL) { + if (pipe_ctx->stream_res.stream_enc && + pipe_ctx->stream_res.stream_enc->funcs->set_dynamic_metadata != NULL) { if (pipe_ctx->stream->dmdata_address.quad_part != 0) { /* if using dynamic meta, don't set up generic infopackets */ pipe_ctx->stream_res.encoder_info_frame.hdrsmd.valid = false; -- cgit v1.2.3 From 12d0e503dd9e0576487b2f20577717b2a36fe0c5 Mon Sep 17 00:00:00 2001 From: Derek Lai Date: Tue, 18 Jun 2019 14:55:57 +0800 Subject: drm/amd/display: Read max down spread [Why] When launch D10.2, driver will write DPCD 0x107 with 0x00 [How] Read MAX_DOWNSPREAD (0x0003h) then keep in current link settings Signed-off-by: Derek Lai Reviewed-by: Tony Cheng Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 435d50356bad..652960c5548a 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -532,6 +532,7 @@ static void read_edp_current_link_settings_on_detect(struct dc_link *link) uint32_t read_dpcd_retry_cnt = 10; enum dc_status status = DC_ERROR_UNEXPECTED; int i; + union max_down_spread max_down_spread = { {0} }; // Read DPCD 00101h to find out the number of lanes currently set for (i = 0; i < read_dpcd_retry_cnt; i++) { @@ -576,6 +577,12 @@ static void read_edp_current_link_settings_on_detect(struct dc_link *link) link->cur_link_settings.link_rate = link_bw_set; link->cur_link_settings.use_link_rate_set = false; } + // Read DPCD 00003h to find the max down spread. + core_link_read_dpcd(link, DP_MAX_DOWNSPREAD, + &max_down_spread.raw, sizeof(max_down_spread)); + link->cur_link_settings.link_spread = + max_down_spread.bits.MAX_DOWN_SPREAD ? + LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED; } static bool detect_dp( -- cgit v1.2.3 From 19f876967a98db63fbfca7e0d9f55099f52189e0 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Thu, 20 Jun 2019 13:03:25 -0400 Subject: drm/amd/display: Disable Audio on reinitialize hardware [Why] When we recover from hang, we do not want to skip the audio enable call. [How] Disable audio in dc_reinitialize_hardware Signed-off-by: Alvin Lee Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher --- .../drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c | 1 + .../drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 20 ++++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c index 740f5db22bb5..50bfb5921de0 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c @@ -333,6 +333,7 @@ void dcn20_clk_mgr_construct( struct dccg *dccg) { clk_mgr->base.ctx = ctx; + clk_mgr->pp_smu = pp_smu; clk_mgr->base.funcs = &dcn2_funcs; clk_mgr->regs = &clk_mgr_regs; clk_mgr->clk_mgr_shift = &clk_mgr_shift; diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 858a58856ebd..8005989c1263 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -965,11 +965,17 @@ void hwss_edp_backlight_control( void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx) { /* notify audio driver for audio modes of monitor */ - struct dc *core_dc = pipe_ctx->stream->ctx->dc; + struct dc *core_dc; struct pp_smu_funcs *pp_smu = NULL; - struct clk_mgr *clk_mgr = core_dc->clk_mgr; + struct clk_mgr *clk_mgr; unsigned int i, num_audio = 1; + if (!pipe_ctx->stream) + return; + + core_dc = pipe_ctx->stream->ctx->dc; + clk_mgr = core_dc->clk_mgr; + if (pipe_ctx->stream_res.audio && pipe_ctx->stream_res.audio->enabled == true) return; @@ -999,9 +1005,15 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx) void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) { - struct dc *dc = pipe_ctx->stream->ctx->dc; + struct dc *dc; struct pp_smu_funcs *pp_smu = NULL; - struct clk_mgr *clk_mgr = dc->clk_mgr; + struct clk_mgr *clk_mgr; + + if (!pipe_ctx || !pipe_ctx->stream) + return; + + dc = pipe_ctx->stream->ctx->dc; + clk_mgr = dc->clk_mgr; if (pipe_ctx->stream_res.audio && pipe_ctx->stream_res.audio->enabled == false) return; -- cgit v1.2.3 From 1ca068ed34d6b39d336c1b0d618ed73ba8f04548 Mon Sep 17 00:00:00 2001 From: Zi Yu Liao Date: Thu, 20 Jun 2019 10:55:26 -0400 Subject: drm/amd/display: fix DMCU hang when going into Modern Standby [why] When the system is going into suspend, set_backlight gets called after the eDP got blanked. Since smooth brightness is enabled, the driver will make a call into the DMCU to ramp the brightness. The DMCU would try to enable ABM to do so. But since the display is blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to get stuck at 1, which results in a dead lock in the DMCU firmware. [how] Disable brightness ramping when the eDP display is blanked. Signed-off-by: Zi Yu Liao Reviewed-by: Eric Yang Acked-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 652960c5548a..f9bed7c65b43 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -2336,7 +2336,7 @@ bool dc_link_set_backlight_level(const struct dc_link *link, if (core_dc->current_state->res_ctx.pipe_ctx[i].stream) { if (core_dc->current_state->res_ctx. pipe_ctx[i].stream->link - == link) + == link) { /* DMCU -1 for all controller id values, * therefore +1 here */ @@ -2344,6 +2344,13 @@ bool dc_link_set_backlight_level(const struct dc_link *link, core_dc->current_state-> res_ctx.pipe_ctx[i].stream_res.tg->inst + 1; + + /* Disable brightness ramping when the display is blanked + * as it can hang the DMCU + */ + if (core_dc->current_state->res_ctx.pipe_ctx[i].plane_state == NULL) + frame_ramp = 0; + } } } abm->funcs->set_backlight_level_pwm( -- cgit v1.2.3 From 74eda776d7a4e69ec7aa1ce30a87636f14220fbb Mon Sep 17 00:00:00 2001 From: Tai Man Date: Fri, 7 Jun 2019 17:32:27 -0400 Subject: drm/amd/display: use encoder's engine id to find matched free audio device [Why] On some platforms, the encoder id 3 is not populated. So the encoders are not stored in right order as index (id: 0, 1, 2, 4, 5) at pool. This would cause encoders id 4 & id 5 to fail when finding corresponding audio device, defaulting to the first available audio device. As result, we cannot stream audio into two DP ports with encoders id 4 & id 5. [How] It need to create enough audio device objects (0 - 5) to perform matching. Then use encoder engine id to find matched audio device. Signed-off-by: Tai Man Reviewed-by: Charlene Liu Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 51a78283a86d..a0e29c37ab69 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -258,7 +258,7 @@ bool resource_construct( * PORT_CONNECTIVITY == 1 (as instructed by HW team). */ update_num_audio(&straps, &num_audio, &pool->audio_support); - for (i = 0; i < pool->pipe_count && i < num_audio; i++) { + for (i = 0; i < caps->num_audio; i++) { struct audio *aud = create_funcs->create_audio(ctx, i); if (aud == NULL) { @@ -1669,6 +1669,12 @@ static struct audio *find_first_free_audio( return pool->audios[i]; } } + + /* use engine id to find free audio */ + if ((id < pool->audio_count) && (res_ctx->is_audio_acquired[id] == false)) { + return pool->audios[id]; + } + /*not found the matching one, first come first serve*/ for (i = 0; i < pool->audio_count; i++) { if (res_ctx->is_audio_acquired[i] == false) { -- cgit v1.2.3 From 09fc26c1718fe7a552866d4eda84e2cc5f9c9c78 Mon Sep 17 00:00:00 2001 From: Fatemeh Darbehani Date: Fri, 21 Jun 2019 17:44:50 -0400 Subject: drm/amd/display: Change min_h_sync_width from 8 to 4 [Why] Some display's hsync width is lower than the minimum dcn20 is set to support right now. This will cause optc1_validate_timing to fail which eventually will result in wrong set mode. This was set to 8 as per HW team's request for no valid reason. [How] Changing min_h_sync_width to 4 will let us validate timing for preffered mode and light up the headset. This change was made to Vega 10 before for a similar issue. Signed-off-by: Fatemeh Darbehani Reviewed-by: Joshua Aberback Acked-by: Aric Cyr Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c index 26a66ccf6e72..1ae973962d53 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c @@ -535,7 +535,7 @@ void dcn20_timing_generator_init(struct optc *optc1) optc1->min_h_blank = 32; optc1->min_v_blank = 3; optc1->min_v_blank_interlace = 5; - optc1->min_h_sync_width = 8; + optc1->min_h_sync_width = 4;// Minimum HSYNC = 8 pixels asked By HW in the first place for no actual reason. Oculus Rift S will not light up with 8 as it's hsyncWidth is 6. Changing it to 4 to fix that issue. optc1->min_v_sync_width = 1; optc1->comb_opp_id = 0xf; } -- cgit v1.2.3 From 39fee5f60ce069cfba55fc3a8ba55faacae330b9 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Mon, 24 Jun 2019 09:49:44 -0400 Subject: drm/amd/display: Wait for flip to complete [why] In pipe split issue occurs when we program immediate flip while vsync flip is pending [how] Don't program immediate flip until flip is no longer pending Signed-off-by: Alvin Lee Reviewed-by: Jaehyun Chung Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index e5e78aa930a6..d810c8940129 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -1265,6 +1265,17 @@ void dcn20_pipe_control_lock( if (pipe->plane_state != NULL) flip_immediate = pipe->plane_state->flip_immediate; + if (flip_immediate && lock) { + while (pipe->plane_res.hubp->funcs->hubp_is_flip_pending(pipe->plane_res.hubp)) { + udelay(1); + } + + if (pipe->bottom_pipe != NULL) + while (pipe->bottom_pipe->plane_res.hubp->funcs->hubp_is_flip_pending(pipe->bottom_pipe->plane_res.hubp)) { + udelay(1); + } + } + /* In flip immediate and pipe splitting case, we need to use GSL * for synchronization. Only do setup on locking and on flip type change. */ -- cgit v1.2.3 From feb7eb522e0a7a22c1e60d386bd3c3bfa1d5e4f7 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Mon, 24 Jun 2019 18:18:58 -0400 Subject: drm/amd/display: put back front end initialization sequence [Why] Seamless boot optimization removed proper front end power off sequence. In driver disable enable case, this causes driver to power gate hubp and dpp while there is still memory fetching going on, this can cause invalid memory requests to be generated which will hang data fabric. [How] Put back proper front end power off sequence Signed-off-by: Eric Yang Reviewed-by: Anthony Koo Acked-by: Leo Li Acked-by: Tony Cheng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 0c4340404e24..2118ea21d7e9 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1195,16 +1195,7 @@ static void dcn10_init_hw(struct dc *dc) * everything down. */ if (dcb->funcs->is_accelerated_mode(dcb) || dc->config.power_down_display_on_boot) { - for (i = 0; i < dc->res_pool->pipe_count; i++) { - struct hubp *hubp = dc->res_pool->hubps[i]; - struct dpp *dpp = dc->res_pool->dpps[i]; - - hubp->funcs->hubp_init(hubp); - dc->res_pool->opps[i]->mpc_tree_params.opp_id = dc->res_pool->opps[i]->inst; - plane_atomic_power_down(dc, dpp, hubp); - } - - apply_DEGVIDCN10_253_wa(dc); + dc->hwss.init_pipes(dc, dc->current_state); } for (i = 0; i < dc->res_pool->audio_count; i++) { @@ -1375,10 +1366,6 @@ static bool dcn10_set_input_transfer_func(struct pipe_ctx *pipe_ctx, return result; } - - - - static bool dcn10_set_output_transfer_func(struct pipe_ctx *pipe_ctx, const struct dc_stream_state *stream) -- cgit v1.2.3 From 67fd6c0d2de8e51e84ff3fa6e68bbd524f823e49 Mon Sep 17 00:00:00 2001 From: Derek Lai Date: Tue, 2 Jul 2019 17:50:41 +0800 Subject: drm/amd/display: allocate 4 ddc engines for RV2 [Why] Driver will create 0, 1, and 2 ddc engines for RV2, but some platforms used 0, 1, and 3. [How] Still allocate 4 ddc engines for RV2. Signed-off-by: Derek Lai Reviewed-by: Aric Cyr Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c index 1a20461c2937..a12530a3ab9c 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c @@ -508,7 +508,7 @@ static const struct resource_caps rv2_res_cap = { .num_audio = 3, .num_stream_encoder = 3, .num_pll = 3, - .num_ddc = 3, + .num_ddc = 4, }; static const struct dc_plane_cap plane_cap = { -- cgit v1.2.3 From 0905f32977268149f06e3ce6ea4bd6d374dd891f Mon Sep 17 00:00:00 2001 From: Julian Parkin Date: Tue, 25 Jun 2019 14:55:53 -0400 Subject: drm/amd/display: Fix dc_create failure handling and 666 color depths [Why] It is possible (but very unlikely) that constructing dc fails before current_state is created. We support 666 color depth in some scenarios, but this isn't handled in get_norm_pix_clk. It uses exactly the same pixel clock as the 888 case. [How] Check for non null current_state before destructing. Add case for 666 color depth to get_norm_pix_clk to avoid assertion. Signed-off-by: Julian Parkin Reviewed-by: Charlene Liu Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 ++++-- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 4ef4dc63e221..fa20201eef3a 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -502,8 +502,10 @@ void dc_stream_set_static_screen_events(struct dc *dc, static void destruct(struct dc *dc) { - dc_release_state(dc->current_state); - dc->current_state = NULL; + if (dc->current_state) { + dc_release_state(dc->current_state); + dc->current_state = NULL; + } destroy_links(dc); diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index a0e29c37ab69..87f97b3a4106 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1839,6 +1839,7 @@ static int get_norm_pix_clk(const struct dc_crtc_timing *timing) pix_clk /= 2; if (timing->pixel_encoding != PIXEL_ENCODING_YCBCR422) { switch (timing->display_color_depth) { + case COLOR_DEPTH_666: case COLOR_DEPTH_888: normalized_pix_clk = pix_clk; break; -- cgit v1.2.3 From 6ac25e6d5b2fbf251e9fa2f4131d42c815b43867 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Thu, 4 Jul 2019 15:17:42 -0400 Subject: drm/amd/display: Only enable audio if speaker allocation exists [Why] In dm_helpers_parse_edid_caps, there is a corner case where no speakers can be allocated even though the audio mode count is greater than 0. Enabling audio when no speaker allocations exists can cause issues in the video stream. [How] Add a check to not enable audio unless one or more speaker allocations exist (since doing this can cause issues in the video stream). Signed-off-by: Alvin Lee Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 87f97b3a4106..2ceaab4fb5de 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1986,7 +1986,7 @@ enum dc_status resource_map_pool_resources( /* TODO: Add check if ASIC support and EDID audio */ if (!stream->converter_disable_audio && dc_is_audio_capable_signal(pipe_ctx->stream->signal) && - stream->audio_info.mode_count) { + stream->audio_info.mode_count && stream->audio_info.flags.all) { pipe_ctx->stream_res.audio = find_first_free_audio( &context->res_ctx, pool, pipe_ctx->stream_res.stream_enc->id); -- cgit v1.2.3 From 58caae27df41d2ef3b1ae3bd06284da5b85ac288 Mon Sep 17 00:00:00 2001 From: Zhan Liu Date: Tue, 2 Jul 2019 15:17:07 -0400 Subject: drm/amd/display: drop ASSERT() if eDP panel is not connected [Why] For boards that support eDP but do not have a physical eDP display connected an ASSERT will be thrown. This is not a critical failure and shouldn't be treated as such. [How] Drop the assertion. Signed-off-by: Zhan Liu Reviewed-by: Nicholas Kazlauskas Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index f9bed7c65b43..909b8f03346e 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -554,8 +554,6 @@ static void read_edp_current_link_settings_on_detect(struct dc_link *link) msleep(8); } - ASSERT(status == DC_OK); - // Read DPCD 00100h to find if standard link rates are set core_link_read_dpcd(link, DP_LINK_BW_SET, &link_bw_set, sizeof(link_bw_set)); -- cgit v1.2.3 From 7352193a33dfc9b69ba3bf6a8caea925b96243b1 Mon Sep 17 00:00:00 2001 From: Tai Man Date: Fri, 28 Jun 2019 11:40:38 -0400 Subject: drm/amd/display: Increase size of audios array [Why] The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES) but the max number of audio devices (num_audio) is 7. In some projects, it will run out of audios array. [How] Incraese the audios array size to 7. Signed-off-by: Tai Man Reviewed-by: Joshua Aberback Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/inc/core_types.h | 2 +- drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h index c89393c19232..a148ffde8b12 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h +++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h @@ -212,7 +212,7 @@ struct resource_pool { struct clock_source *clock_sources[MAX_CLOCK_SOURCES]; unsigned int clk_src_count; - struct audio *audios[MAX_PIPES]; + struct audio *audios[MAX_AUDIOS]; unsigned int audio_count; struct audio_support audio_support; diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h b/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h index 8759ec03aede..f82365e2d03c 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/hw_shared.h @@ -34,6 +34,7 @@ * Data types shared between different Virtual HW blocks ******************************************************************************/ +#define MAX_AUDIOS 7 #define MAX_PIPES 6 #if defined(CONFIG_DRM_AMD_DC_DCN2_0) #define MAX_DWB_PIPES 1 -- cgit v1.2.3 From b791f9dc2de4f9e66aae28451d1284d054542614 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Sat, 29 Jun 2019 14:38:04 -0400 Subject: drm/amd/display: do not read link setting if edp not connected [Why] Previously assume eDP sink present if connector present. Do not need to enforce this restriction. Fix issue where driver attempt to read link setting even though no edp connected. {How] Only read link setting after reading connection status. Signed-off-by: Eric Yang Reviewed-by: Yongqiang Sun Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 909b8f03346e..355b4ba12796 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -722,13 +722,6 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason) return false; } - if (link->connector_signal == SIGNAL_TYPE_EDP) { - /* On detect, we want to make sure current link settings are - * up to date, especially if link was powered on by GOP. - */ - read_edp_current_link_settings_on_detect(link); - } - prev_sink = link->local_sink; if (prev_sink != NULL) { dc_sink_retain(prev_sink); @@ -770,6 +763,7 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason) } case SIGNAL_TYPE_EDP: { + read_edp_current_link_settings_on_detect(link); detect_edp_sink_caps(link); sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; -- cgit v1.2.3 From b70666934b41c081489d5ff3c5bf017796545d35 Mon Sep 17 00:00:00 2001 From: Dale Zhao Date: Wed, 10 Jul 2019 17:36:53 +0800 Subject: drm/amd/display: handle active dongle port type is DP++ or DP case [Why]: Some active dongles have DP++ port and DP port at the same time. Current code doesn't cover DP++ case and processes as default DVI case, in which audio is disabled. Because of dual mode, DP case is also treat as DVI case for the other port. [How]: According DP 1.4 spec, add DP++ procedure similar with HDMI case. Also add None dongle type for DP case. Signed-off-by: Dale Zhao Reviewed-by: Wenjing Liu Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 30 ++++++++++++++++-------- drivers/gpu/drm/amd/display/include/dpcd_defs.h | 2 +- 2 files changed, 21 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 3e00c88bd2b6..2c7aaed907b9 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2247,8 +2247,8 @@ static void get_active_converter_info( case DOWNSTREAM_VGA: link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_VGA_CONVERTER; break; - case DOWNSTREAM_DVI_HDMI: - /* At this point we don't know is it DVI or HDMI, + case DOWNSTREAM_DVI_HDMI_DP_PLUS_PLUS: + /* At this point we don't know is it DVI or HDMI or DP++, * assume DVI.*/ link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_DVI_CONVERTER; break; @@ -2265,6 +2265,10 @@ static void get_active_converter_info( det_caps, sizeof(det_caps)); switch (port_caps->bits.DWN_STRM_PORTX_TYPE) { + /*Handle DP case as DONGLE_NONE*/ + case DOWN_STREAM_DETAILED_DP: + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_NONE; + break; case DOWN_STREAM_DETAILED_VGA: link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_VGA_CONVERTER; @@ -2274,6 +2278,8 @@ static void get_active_converter_info( DISPLAY_DONGLE_DP_DVI_CONVERTER; break; case DOWN_STREAM_DETAILED_HDMI: + case DOWN_STREAM_DETAILED_DP_PLUS_PLUS: + /*Handle DP++ active converter case, process DP++ case as HDMI case according DP1.4 spec*/ link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_HDMI_CONVERTER; @@ -2289,14 +2295,18 @@ static void get_active_converter_info( link->dpcd_caps.dongle_caps.is_dp_hdmi_s3d_converter = hdmi_caps.bits.FRAME_SEQ_TO_FRAME_PACK; - link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_pass_through = - hdmi_caps.bits.YCrCr422_PASS_THROUGH; - link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_pass_through = - hdmi_caps.bits.YCrCr420_PASS_THROUGH; - link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_converter = - hdmi_caps.bits.YCrCr422_CONVERSION; - link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_converter = - hdmi_caps.bits.YCrCr420_CONVERSION; + /*YCBCR capability only for HDMI case*/ + if (port_caps->bits.DWN_STRM_PORTX_TYPE + == DOWN_STREAM_DETAILED_HDMI) { + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_pass_through = + hdmi_caps.bits.YCrCr422_PASS_THROUGH; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_pass_through = + hdmi_caps.bits.YCrCr420_PASS_THROUGH; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_converter = + hdmi_caps.bits.YCrCr422_CONVERSION; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_converter = + hdmi_caps.bits.YCrCr420_CONVERSION; + } link->dpcd_caps.dongle_caps.dp_hdmi_max_bpc = translate_dpcd_max_bpc( diff --git a/drivers/gpu/drm/amd/display/include/dpcd_defs.h b/drivers/gpu/drm/amd/display/include/dpcd_defs.h index 1c66166d0a94..2c90d1b46c8b 100644 --- a/drivers/gpu/drm/amd/display/include/dpcd_defs.h +++ b/drivers/gpu/drm/amd/display/include/dpcd_defs.h @@ -43,7 +43,7 @@ enum dpcd_revision { enum dpcd_downstream_port_type { DOWNSTREAM_DP = 0, DOWNSTREAM_VGA, - DOWNSTREAM_DVI_HDMI, + DOWNSTREAM_DVI_HDMI_DP_PLUS_PLUS,/* DVI, HDMI, DP++ */ DOWNSTREAM_NONDDC /* has no EDID (TV,CV) */ }; -- cgit v1.2.3 From b840e4d5fec6fe2019de36b10412b69df9c4d39a Mon Sep 17 00:00:00 2001 From: Kevin Wang Date: Fri, 19 Jul 2019 11:39:21 +0800 Subject: drm/amd/powerplay: custom peak clock freq for navi10 v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang Reviewed-by: Huang Rui Reviewed-by: Kenneth Feng Reviewed-by: Evan Quan Reviewed-by: Jack Gui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 73 ++++++++++++++------------ drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 4 ++ drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 55 +++++++++++++++++++ drivers/gpu/drm/amd/powerplay/navi10_ppt.h | 4 ++ 4 files changed, 103 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index 768aae2e20da..c097113c3976 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -1374,13 +1374,49 @@ static int smu_enable_umd_pstate(void *handle, return 0; } +static int smu_default_set_performance_level(struct smu_context *smu, enum amd_dpm_forced_level level) +{ + int ret = 0; + uint32_t sclk_mask, mclk_mask, soc_mask; + + switch (level) { + case AMD_DPM_FORCED_LEVEL_HIGH: + ret = smu_force_dpm_limit_value(smu, true); + break; + case AMD_DPM_FORCED_LEVEL_LOW: + ret = smu_force_dpm_limit_value(smu, false); + break; + case AMD_DPM_FORCED_LEVEL_AUTO: + case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: + ret = smu_unforce_dpm_levels(smu); + break; + case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: + case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK: + case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: + ret = smu_get_profiling_clk_mask(smu, level, + &sclk_mask, + &mclk_mask, + &soc_mask); + if (ret) + return ret; + smu_force_clk_levels(smu, SMU_SCLK, 1 << sclk_mask); + smu_force_clk_levels(smu, SMU_MCLK, 1 << mclk_mask); + smu_force_clk_levels(smu, SMU_SOCCLK, 1 << soc_mask); + break; + case AMD_DPM_FORCED_LEVEL_MANUAL: + case AMD_DPM_FORCED_LEVEL_PROFILE_EXIT: + default: + break; + } + return ret; +} + int smu_adjust_power_state_dynamic(struct smu_context *smu, enum amd_dpm_forced_level level, bool skip_display_settings) { int ret = 0; int index = 0; - uint32_t sclk_mask, mclk_mask, soc_mask; long workload; struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); @@ -1411,39 +1447,10 @@ int smu_adjust_power_state_dynamic(struct smu_context *smu, } if (smu_dpm_ctx->dpm_level != level) { - switch (level) { - case AMD_DPM_FORCED_LEVEL_HIGH: - ret = smu_force_dpm_limit_value(smu, true); - break; - case AMD_DPM_FORCED_LEVEL_LOW: - ret = smu_force_dpm_limit_value(smu, false); - break; - - case AMD_DPM_FORCED_LEVEL_AUTO: - case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: - ret = smu_unforce_dpm_levels(smu); - break; - - case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: - case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK: - case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: - ret = smu_get_profiling_clk_mask(smu, level, - &sclk_mask, - &mclk_mask, - &soc_mask); - if (ret) - return ret; - smu_force_clk_levels(smu, SMU_SCLK, 1 << sclk_mask); - smu_force_clk_levels(smu, SMU_MCLK, 1 << mclk_mask); - smu_force_clk_levels(smu, SMU_SOCCLK, 1 << soc_mask); - break; - - case AMD_DPM_FORCED_LEVEL_MANUAL: - case AMD_DPM_FORCED_LEVEL_PROFILE_EXIT: - default: - break; + ret = smu_asic_set_performance_level(smu, level); + if (ret) { + ret = smu_default_set_performance_level(smu, level); } - if (!ret) smu_dpm_ctx->dpm_level = level; } diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h index 1af992fb0bde..564446ff0d1b 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h @@ -621,6 +621,7 @@ struct pptable_funcs { int (*get_thermal_temperature_range)(struct smu_context *smu, struct smu_temperature_range *range); int (*get_uclk_dpm_states)(struct smu_context *smu, uint32_t *clocks_in_khz, uint32_t *num_states); int (*set_default_od_settings)(struct smu_context *smu, bool initialize); + int (*set_performance_level)(struct smu_context *smu, enum amd_dpm_forced_level level); }; struct smu_funcs @@ -918,6 +919,9 @@ struct smu_funcs ((smu)->funcs->baco_get_state? (smu)->funcs->baco_get_state((smu), (state)) : 0) #define smu_baco_reset(smu) \ ((smu)->funcs->baco_reset? (smu)->funcs->baco_reset((smu)) : 0) +#define smu_asic_set_performance_level(smu, level) \ + ((smu)->ppt_funcs->set_performance_level? (smu)->ppt_funcs->set_performance_level((smu), (level)) : -EINVAL); + extern int smu_get_atom_data_table(struct smu_context *smu, uint32_t table, uint16_t *size, uint8_t *frev, uint8_t *crev, diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 8293b5216aad..7b1753f9a5bf 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -1565,6 +1565,60 @@ static int navi10_set_ppfeature_status(struct smu_context *smu, return 0; } +static int navi10_set_peak_clock_by_device(struct smu_context *smu) +{ + struct amdgpu_device *adev = smu->adev; + int ret = 0; + uint32_t sclk_freq = 0, uclk_freq = 0; + uint32_t uclk_level = 0; + + switch (adev->rev_id) { + case 0xf0: /* XTX */ + case 0xc0: + sclk_freq = NAVI10_PEAK_SCLK_XTX; + break; + case 0xf1: /* XT */ + case 0xc1: + sclk_freq = NAVI10_PEAK_SCLK_XT; + break; + default: /* XL */ + sclk_freq = NAVI10_PEAK_SCLK_XL; + break; + } + + ret = smu_get_dpm_level_count(smu, SMU_UCLK, &uclk_level); + if (ret) + return ret; + ret = smu_get_dpm_freq_by_index(smu, SMU_UCLK, uclk_level - 1, &uclk_freq); + if (ret) + return ret; + + ret = smu_set_soft_freq_range(smu, SMU_SCLK, sclk_freq, sclk_freq); + if (ret) + return ret; + ret = smu_set_soft_freq_range(smu, SMU_UCLK, uclk_freq, uclk_freq); + if (ret) + return ret; + + return ret; +} + +static int navi10_set_performance_level(struct smu_context *smu, enum amd_dpm_forced_level level) +{ + int ret = 0; + + switch (level) { + case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: + ret = navi10_set_peak_clock_by_device(smu); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + static const struct pptable_funcs navi10_ppt_funcs = { .tables_init = navi10_tables_init, .alloc_dpm_context = navi10_allocate_dpm_context, @@ -1600,6 +1654,7 @@ static const struct pptable_funcs navi10_ppt_funcs = { .get_uclk_dpm_states = navi10_get_uclk_dpm_states, .get_ppfeature_status = navi10_get_ppfeature_status, .set_ppfeature_status = navi10_set_ppfeature_status, + .set_performance_level = navi10_set_performance_level, }; void navi10_set_ppt_funcs(struct smu_context *smu) diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.h b/drivers/gpu/drm/amd/powerplay/navi10_ppt.h index 957288e22f47..620ff17c2fef 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.h +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.h @@ -23,6 +23,10 @@ #ifndef __NAVI10_PPT_H__ #define __NAVI10_PPT_H__ +#define NAVI10_PEAK_SCLK_XTX (1830) +#define NAVI10_PEAK_SCLK_XT (1755) +#define NAVI10_PEAK_SCLK_XL (1625) + extern void navi10_set_ppt_funcs(struct smu_context *smu); #endif -- cgit v1.2.3 From 1bcff32679f60fe2387f63f22b8b35375052bcb0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Jul 2019 15:25:04 -0500 Subject: drm/amdgpu/smu: move fan rpm query into the asic specific code On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 4 ++-- drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 6 +++--- drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 12 +++++++----- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 18 ------------------ drivers/gpu/drm/amd/powerplay/vega20_ppt.c | 20 +++++++++++++++++++- 5 files changed, 31 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 8b7efd0a7028..03ca8c69114f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -1734,7 +1734,7 @@ static ssize_t amdgpu_hwmon_get_fan1_input(struct device *dev, return -EINVAL; if (is_support_sw_smu(adev)) { - err = smu_get_current_rpm(&adev->smu, &speed); + err = smu_get_fan_speed_rpm(&adev->smu, &speed); if (err) return err; } else if (adev->powerplay.pp_funcs->get_fan_speed_rpm) { @@ -1794,7 +1794,7 @@ static ssize_t amdgpu_hwmon_get_fan1_target(struct device *dev, return -EINVAL; if (is_support_sw_smu(adev)) { - err = smu_get_current_rpm(&adev->smu, &rpm); + err = smu_get_fan_speed_rpm(&adev->smu, &rpm); if (err) return err; } else if (adev->powerplay.pp_funcs->get_fan_speed_rpm) { diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h index 564446ff0d1b..22e46a289a16 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h @@ -613,6 +613,7 @@ struct pptable_funcs { int (*tables_init)(struct smu_context *smu, struct smu_table *tables); int (*set_thermal_fan_table)(struct smu_context *smu); int (*get_fan_speed_percent)(struct smu_context *smu, uint32_t *speed); + int (*get_fan_speed_rpm)(struct smu_context *smu, uint32_t *speed); int (*set_watermarks_table)(struct smu_context *smu, void *watermarks, struct dm_pp_wm_sets_with_clock_ranges_soc15 *clock_ranges); int (*get_current_clk_freq_by_table)(struct smu_context *smu, @@ -686,7 +687,6 @@ struct smu_funcs int (*set_watermarks_for_clock_ranges)(struct smu_context *smu, struct dm_pp_wm_sets_with_clock_ranges_soc15 *clock_ranges); int (*conv_power_profile_to_pplib_workload)(int power_profile); - int (*get_current_rpm)(struct smu_context *smu, uint32_t *speed); uint32_t (*get_fan_control_mode)(struct smu_context *smu); int (*set_fan_control_mode)(struct smu_context *smu, uint32_t mode); int (*set_fan_speed_percent)(struct smu_context *smu, uint32_t speed); @@ -752,8 +752,6 @@ struct smu_funcs ((smu)->funcs->init_max_sustainable_clocks ? (smu)->funcs->init_max_sustainable_clocks((smu)) : 0) #define smu_set_default_od_settings(smu, initialize) \ ((smu)->ppt_funcs->set_default_od_settings ? (smu)->ppt_funcs->set_default_od_settings((smu), (initialize)) : 0) -#define smu_get_current_rpm(smu, speed) \ - ((smu)->funcs->get_current_rpm ? (smu)->funcs->get_current_rpm((smu), (speed)) : 0) #define smu_set_fan_speed_rpm(smu, speed) \ ((smu)->funcs->set_fan_speed_rpm ? (smu)->funcs->set_fan_speed_rpm((smu), (speed)) : 0) #define smu_send_smc_msg(smu, msg) \ @@ -842,6 +840,8 @@ struct smu_funcs ((smu)->ppt_funcs->get_fan_speed_percent ? (smu)->ppt_funcs->get_fan_speed_percent((smu), (speed)) : 0) #define smu_set_fan_speed_percent(smu, speed) \ ((smu)->funcs->set_fan_speed_percent ? (smu)->funcs->set_fan_speed_percent((smu), (speed)) : 0) +#define smu_get_fan_speed_rpm(smu, speed) \ + ((smu)->ppt_funcs->get_fan_speed_rpm ? (smu)->ppt_funcs->get_fan_speed_rpm((smu), (speed)) : 0) #define smu_msg_get_index(smu, msg) \ ((smu)->ppt_funcs? ((smu)->ppt_funcs->get_smu_msg_index? (smu)->ppt_funcs->get_smu_msg_index((smu), (msg)) : -EINVAL) : -EINVAL) diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 7b1753f9a5bf..4aaad255a288 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -954,12 +954,13 @@ static bool navi10_is_dpm_running(struct smu_context *smu) return !!(feature_enabled & SMC_DPM_FEATURE); } -static int navi10_get_fan_speed(struct smu_context *smu, uint16_t *value) +static int navi10_get_fan_speed_rpm(struct smu_context *smu, + uint32_t *speed) { SmuMetrics_t metrics; int ret = 0; - if (!value) + if (!speed) return -EINVAL; memset(&metrics, 0, sizeof(metrics)); @@ -969,7 +970,7 @@ static int navi10_get_fan_speed(struct smu_context *smu, uint16_t *value) if (ret) return ret; - *value = metrics.CurrFanSpeed; + *speed = metrics.CurrFanSpeed; return ret; } @@ -979,10 +980,10 @@ static int navi10_get_fan_speed_percent(struct smu_context *smu, { int ret = 0; uint32_t percent = 0; - uint16_t current_rpm; + uint32_t current_rpm; PPTable_t *pptable = smu->smu_table.driver_pptable; - ret = navi10_get_fan_speed(smu, ¤t_rpm); + ret = navi10_get_fan_speed_rpm(smu, ¤t_rpm); if (ret) return ret; @@ -1646,6 +1647,7 @@ static const struct pptable_funcs navi10_ppt_funcs = { .unforce_dpm_levels = navi10_unforce_dpm_levels, .is_dpm_running = navi10_is_dpm_running, .get_fan_speed_percent = navi10_get_fan_speed_percent, + .get_fan_speed_rpm = navi10_get_fan_speed_rpm, .get_power_profile_mode = navi10_get_power_profile_mode, .set_power_profile_mode = navi10_set_power_profile_mode, .get_profiling_clk_mask = navi10_get_profiling_clk_mask, diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c index 95c7c4dae523..caca9091bfcc 100644 --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c @@ -1371,23 +1371,6 @@ static int smu_v11_0_gfx_off_control(struct smu_context *smu, bool enable) return ret; } -static int smu_v11_0_get_current_rpm(struct smu_context *smu, - uint32_t *current_rpm) -{ - int ret; - - ret = smu_send_smc_msg(smu, SMU_MSG_GetCurrentRpm); - - if (ret) { - pr_err("Attempt to get current RPM from SMC Failed!\n"); - return ret; - } - - smu_read_smc_arg(smu, current_rpm); - - return 0; -} - static uint32_t smu_v11_0_get_fan_control_mode(struct smu_context *smu) { @@ -1773,7 +1756,6 @@ static const struct smu_funcs smu_v11_0_funcs = { .set_deep_sleep_dcefclk = smu_v11_0_set_deep_sleep_dcefclk, .display_clock_voltage_request = smu_v11_0_display_clock_voltage_request, .set_watermarks_for_clock_ranges = smu_v11_0_set_watermarks_for_clock_ranges, - .get_current_rpm = smu_v11_0_get_current_rpm, .get_fan_control_mode = smu_v11_0_get_fan_control_mode, .set_fan_control_mode = smu_v11_0_set_fan_control_mode, .set_fan_speed_percent = smu_v11_0_set_fan_speed_percent, diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c index bb9bb09cfc7a..dc139a6feeb1 100644 --- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c @@ -3015,6 +3015,23 @@ static int vega20_set_thermal_fan_table(struct smu_context *smu) return ret; } +static int vega20_get_fan_speed_rpm(struct smu_context *smu, + uint32_t *speed) +{ + int ret; + + ret = smu_send_smc_msg(smu, SMU_MSG_GetCurrentRpm); + + if (ret) { + pr_err("Attempt to get current RPM from SMC Failed!\n"); + return ret; + } + + smu_read_smc_arg(smu, speed); + + return 0; +} + static int vega20_get_fan_speed_percent(struct smu_context *smu, uint32_t *speed) { @@ -3022,7 +3039,7 @@ static int vega20_get_fan_speed_percent(struct smu_context *smu, uint32_t current_rpm = 0, percent = 0; PPTable_t *pptable = smu->smu_table.driver_pptable; - ret = smu_get_current_rpm(smu, ¤t_rpm); + ret = vega20_get_fan_speed_rpm(smu, ¤t_rpm); if (ret) return ret; @@ -3293,6 +3310,7 @@ static const struct pptable_funcs vega20_ppt_funcs = { .is_dpm_running = vega20_is_dpm_running, .set_thermal_fan_table = vega20_set_thermal_fan_table, .get_fan_speed_percent = vega20_get_fan_speed_percent, + .get_fan_speed_rpm = vega20_get_fan_speed_rpm, .set_watermarks_table = vega20_set_watermarks_table, .get_thermal_temperature_range = vega20_get_thermal_temperature_range }; -- cgit v1.2.3 From 92e6475ae0a0383b012eb21c1aaf0e5456b1a3d9 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 3 Jul 2019 10:02:39 -0400 Subject: drm/amd/display: Set enabled to false at start of audio disable [Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Zhan Liu Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 8005989c1263..fafb4b470140 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1021,6 +1021,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control( pipe_ctx->stream_res.stream_enc, true); if (pipe_ctx->stream_res.audio) { + pipe_ctx->stream_res.audio->enabled = false; + if (dc->res_pool->pp_smu) pp_smu = dc->res_pool->pp_smu; @@ -1051,8 +1053,6 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) /* dal_audio_disable_azalia_audio_jack_presence(stream->audio, * stream->stream_engine_id); */ - if (pipe_ctx->stream_res.audio) - pipe_ctx->stream_res.audio->enabled = false; } } -- cgit v1.2.3