From 546256fbd06d70a87381020ea8553fb78c9abf43 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 28 May 2009 19:25:28 +0300 Subject: ath9k: Add sanity check for beacon_int in adhoc/mesh case It looks like mac80211 can request the driver to start beaconing with a beacon interval of zero in some cases (at least for mesh point). This does not sound correct and something may need to be fixed in mac80211. However, taken into account the unpleasantness of getting stuck in an infinite busy loop with rtnl_lock held, let's add a quick workaround in the driver to avoid the worst symptom while someone more familiar with the mesh implementation can figure out what should be done with mac80211 as far as beacon interval configuration is concerned. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 0c67ed2e83ce..3639a2e6987d 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -674,6 +674,14 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc, intval = conf->beacon_interval & ATH9K_BEACON_PERIOD; + /* + * It looks like mac80211 may end up using beacon interval of zero in + * some cases (at least for mesh point). Avoid getting into an + * infinite loop by using a bit safer value instead.. + */ + if (intval == 0) + intval = 100; + /* Pull nexttbtt forward to reflect the current TSF */ nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp); -- cgit v1.2.3