From c23fdc7da4853c25509255419bf88ed94cd42a5b Mon Sep 17 00:00:00 2001 From: Mohit Kumar Date: Wed, 16 Apr 2014 10:23:28 -0600 Subject: PCI: designware: Fix comment for setting number of lanes Corrects comment for setting number of lanes. Signed-off-by: Mohit Kumar Signed-off-by: Bjorn Helgaas Acked-by: Jingoo Han --- drivers/pci/host/pcie-designware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 509a29d84509..8909e7748e67 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -764,7 +764,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp) u32 membase; u32 memlimit; - /* set the number of lines as 4 */ + /* set the number of lanes */ dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); val &= ~PORT_LINK_MODE_MASK; switch (pp->lanes) { -- cgit v1.2.3 From 017fcdc30cdae18c0946eef1ece1f14b4c7897ba Mon Sep 17 00:00:00 2001 From: Mohit Kumar Date: Wed, 16 Apr 2014 10:23:34 -0600 Subject: PCI: designware: Fix iATU programming for cfg1, io and mem viewport This patch corrects iATU programming for cfg1, io and mem viewport. Enable ATU only after configuring it. Signed-off-by: Mohit Kumar Signed-off-by: Ajay Khandelwal Signed-off-by: Bjorn Helgaas Acked-by: Jingoo Han Cc: stable@vger.kernel.org --- drivers/pci/host/pcie-designware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 8909e7748e67..a9a62ce4bf05 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -520,13 +520,13 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE); dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE); dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1, PCIE_ATU_LIMIT); dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); + dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); } static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) @@ -535,7 +535,6 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE); dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE); dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1, @@ -543,6 +542,7 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr), PCIE_ATU_UPPER_TARGET); + dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); } static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) @@ -551,7 +551,6 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE); dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE); dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1, @@ -559,6 +558,7 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr), PCIE_ATU_UPPER_TARGET); + dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); } static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, -- cgit v1.2.3 From f86b3e392780050e5907f1c0f3cb6c4cc05fd6bb Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 16 Apr 2014 10:23:46 -0600 Subject: PCI: designware: Use new OF interrupt mapping when possible Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible. This is the recommended method of doing the IRQ mapping. For old devicetrees we fall back to the previous practice. This makes INTB, INTC, and INTD work on i.MX. Tested-by: Tim Harvey Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Reviewed-by: Marek Vasut Acked-by: Arnd Bergmann Acked-by: Jingoo Han --- drivers/pci/host/pcie-designware.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index a9a62ce4bf05..c4e373294476 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -490,7 +491,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp) dw_pci.nr_controllers = 1; dw_pci.private_data = (void **)&pp; - pci_common_init(&dw_pci); + pci_common_init_dev(pp->dev, &dw_pci); pci_assign_unassigned_resources(); #ifdef CONFIG_PCI_DOMAINS dw_pci.domain++; @@ -723,7 +724,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) if (pp) { pp->root_bus_nr = sys->busnr; - bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops, + bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops, sys, &sys->resources); } else { bus = NULL; @@ -736,8 +737,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); + int irq; - return pp->irq; + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (!irq) + irq = pp->irq; + + return irq; } static void dw_pcie_add_bus(struct pci_bus *bus) -- cgit v1.2.3 From f8f2fe7355fb04dd129d49ac0ad440beb44f0f79 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 16 Apr 2014 10:24:09 -0600 Subject: PCI: rcar: Use new OF interrupt mapping when possible Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible. This is the recommended method of doing the IRQ mapping. For old devicetrees we fall back to the previous practice. This allows interrupts to be remapped across bridges. Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Acked-by: Simon Horman --- drivers/pci/host/pci-rcar-gen2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c index fd3e3ab56509..4fe349dcaf59 100644 --- a/drivers/pci/host/pci-rcar-gen2.c +++ b/drivers/pci/host/pci-rcar-gen2.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -180,8 +181,13 @@ static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pci_sys_data *sys = dev->bus->sysdata; struct rcar_pci_priv *priv = sys->private_data; + int irq; + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (!irq) + irq = priv->irq; - return priv->irq; + return irq; } #ifdef CONFIG_PCI_DEBUG -- cgit v1.2.3 From f5d3352b2751f8de7e06e23a04ac0b4c474075e9 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 16 Apr 2014 10:24:32 -0600 Subject: PCI: tegra: Use new OF interrupt mapping when possible Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible. This is the recommended method of doing the IRQ mapping. For old devicetrees we fall back to the previous practice. This allows interrupts to be remapped across bridges. Tested-by: Stephen Warren Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Acked-by: Arnd Bergmann --- drivers/pci/host/pci-tegra.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 330f7e3a32dd..083cf37ca047 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -639,10 +639,15 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin) { struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata); + int irq; tegra_cpuidle_pcie_irqs_in_use(); - return pcie->irq; + irq = of_irq_parse_and_map_pci(pdev, slot, pin); + if (!irq) + irq = pcie->irq; + + return irq; } static void tegra_pcie_add_bus(struct pci_bus *bus) -- cgit v1.2.3