From 9b2035a0b9ee9745c236cc2ec1ec0b0eae692a1a Mon Sep 17 00:00:00 2001
From: Neil Zhang
Date: Tue, 10 Jul 2012 10:07:01 +0800
Subject: usb: gadget: mv_udc: reduce the delay interval

There are several places use udelay(LOOPS_USEC) to wait the status to be
changed, but the delay interval is a bit too long, so reduce it to
enhance the performance.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 75db2c306cea..9e40f89635b2 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -53,7 +53,7 @@
 #define READSAFE_TIMEOUT	1000
 #define DTD_TIMEOUT		1000
 
-#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC_SHIFT	1
 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
 
-- 
cgit v1.2.3


From a07bc24e2773e11cb4a6c03d72cd3cdb50c41914 Mon Sep 17 00:00:00 2001
From: Neil Zhang
Date: Tue, 10 Jul 2012 10:07:02 +0800
Subject: usb: gadget: mv_udc: remove unused code

Clean unused code for mv_udc driver.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 9e40f89635b2..c05d340c7d02 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -51,7 +51,6 @@
 #define EPSTATUS_TIMEOUT	10000
 #define PRIME_TIMEOUT		10000
 #define READSAFE_TIMEOUT	1000
-#define DTD_TIMEOUT		1000
 
 #define LOOPS_USEC_SHIFT	1
 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
@@ -64,7 +63,6 @@ static const char driver_desc[] = DRIVER_DESC;
 
 /* controller device global variable */
 static struct mv_udc	*the_controller;
-int mv_usb_otgsc;
 
 static void nuke(struct mv_ep *ep, int status);
 static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
-- 
cgit v1.2.3


From 0344606bec0f3325ba9c1d4de74a5dd98911916d Mon Sep 17 00:00:00 2001
From: Neil Zhang
Date: Tue, 10 Jul 2012 10:07:03 +0800
Subject: usb: gadget: mv_udc: avoid sleeping on spinlock

build_dtd() can be called when hold a spinlock, but GFP_KERNEL may cause
dma_pool_alloc() sleep, So we need use GFP_ATOMIC instead of GFP_KERNEL.
But using GFP_ATOMIC may cause failure when allocating memory, add error
handler to handle it.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 52 +++++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index c05d340c7d02..425a204d29c2 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -373,7 +373,7 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 	 * Be careful that no _GFP_HIGHMEM is set,
 	 * or we can not use dma_to_virt
 	 */
-	dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma);
 	if (dtd == NULL)
 		return dtd;
 
@@ -706,6 +706,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct mv_req *req = container_of(_req, struct mv_req, req);
 	struct mv_udc *udc = ep->udc;
 	unsigned long flags;
+	int retval;
 
 	/* catch various bogus parameters */
 	if (!_req || !req->req.complete || !req->req.buf
@@ -753,15 +754,17 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* build dtds and push them to device queue */
 	if (!req_to_dtd(req)) {
-		int retval;
 		retval = queue_dtd(ep, req);
 		if (retval) {
 			spin_unlock_irqrestore(&udc->lock, flags);
-			return retval;
+			dev_err(&udc->dev->dev, "Failed to queue dtd\n");
+			goto err_unmap_dma;
 		}
 	} else {
 		spin_unlock_irqrestore(&udc->lock, flags);
-		return -ENOMEM;
+		dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n");
+		retval = -ENOMEM;
+		goto err_unmap_dma;
 	}
 
 	/* Update ep0 state */
@@ -773,6 +776,22 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	return 0;
+
+err_unmap_dma:
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	return retval;
 }
 
 static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req)
@@ -1497,15 +1516,17 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 	}
 
 	/* prime the data phase */
-	if (!req_to_dtd(req))
+	if (!req_to_dtd(req)) {
 		retval = queue_dtd(ep, req);
-	else{	/* no mem */
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"Failed to queue dtd when prime status\n");
+			goto out;
+		}
+	} else{	/* no mem */
 		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (retval) {
-		dev_err(&udc->dev->dev, "response error on GET_STATUS request\n");
+		dev_err(&udc->dev->dev,
+			"Failed to dma_pool_alloc when prime status\n");
 		goto out;
 	}
 
@@ -1513,6 +1534,15 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 
 	return 0;
 out:
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	}
+
 	return retval;
 }
 
-- 
cgit v1.2.3


From 583a7263c7ed05c9a625d50950551ba5749c9379 Mon Sep 17 00:00:00 2001
From: Neil Zhang
Date: Tue, 10 Jul 2012 10:07:04 +0800
Subject: usb: gadget: mv_udc: enable stream mode

According to ChipIdea's reference manual in section 8.5.2
"Non-streaming operational mode in device mode", we'd better enable stream
mode, especially that ISO endpoints are not supported when the SDIS bit
is set.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 425a204d29c2..4d3a4136b376 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1082,7 +1082,7 @@ static int udc_reset(struct mv_udc *udc)
 	tmp |= USBMODE_CTRL_MODE_DEVICE;
 
 	/* turn setup lockout off, require setup tripwire in usbcmd */
-	tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE;
+	tmp |= USBMODE_SETUP_LOCK_OFF;
 
 	writel(tmp, &udc->op_regs->usbmode);
 
-- 
cgit v1.2.3


From 60326ce377090541db9ba1a05a041316ab5b46ec Mon Sep 17 00:00:00 2001
From: Chao Xie
Date: Tue, 10 Jul 2012 10:07:05 +0800
Subject: usb: gadget: mv_udc: add iso support

In order to support iso, we need do the following things:
1. fix length for one dtd
2. allow req contains multiple packets for a ISO transfer

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Yu Xu <yuxu@marvell.com>
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 4d3a4136b376..ff6154d1816e 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -355,17 +355,24 @@ done:
 	return retval;
 }
 
-
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 		dma_addr_t *dma, int *is_last)
 {
-	u32 temp;
 	struct mv_dtd *dtd;
 	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	u32 temp, mult = 0;
 
 	/* how big will this transfer be? */
-	*length = min(req->req.length - req->req.actual,
-			(unsigned)EP_MAX_LENGTH_TRANSFER);
+	if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) {
+		dqh = req->ep->dqh;
+		mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS)
+				& 0x3;
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)(mult * req->ep->ep.maxpacket));
+	} else
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)EP_MAX_LENGTH_TRANSFER);
 
 	udc = req->ep->udc;
 
@@ -407,6 +414,8 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 	if (*is_last && !req->req.no_interrupt)
 		temp |= DTD_IOC;
 
+	temp |= mult << 10;
+
 	dtd->size_ioc_sts = temp;
 
 	mb();
@@ -718,10 +727,6 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-		if (req->req.length > ep->ep.maxpacket)
-			return -EMSGSIZE;
-	}
 
 	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
-- 
cgit v1.2.3


From 1dcaa252fdf01e4ba49ece156812043baf01c7cc Mon Sep 17 00:00:00 2001
From: Yunfan Zhang
Date: Tue, 10 Jul 2012 10:07:06 +0800
Subject: usb: gadget: mv_udc: fix hang when shutdown

Fix system hang in udc shutdown routine which caused by accessing usb
register when clock is disabled. So enable usb clock before access
register.

Signed-off-by: Yunfan Zhang <yfzhang@marvell.com>
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ff6154d1816e..58edff9abcef 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2501,9 +2501,11 @@ static void mv_udc_shutdown(struct platform_device *dev)
 	u32 mode;
 
 	/* reset controller mode to IDLE */
+	mv_udc_enable(udc);
 	mode = readl(&udc->op_regs->usbmode);
 	mode &= ~3;
 	writel(mode, &udc->op_regs->usbmode);
+	mv_udc_disable(udc);
 }
 
 static struct platform_driver udc_driver = {
-- 
cgit v1.2.3


From 11c37c8b64b9d9d4ab19d387e6028eee3ec188d3 Mon Sep 17 00:00:00 2001
From: Neil Zhang
Date: Tue, 10 Jul 2012 10:07:07 +0800
Subject: usb: gadget: mv_udc: fix boot up hang

Fix boot up hang when enable udc without otg enabled.
The root cause is that the clock will be shut down when probe routine is
finished because of clock gating. When a gadget driver is registered at
this time, it will call mv_udc_start which in turn will call
mv_udc_vbus_session. If there is no cable attached at the boot up time,
the vbus is low, so it will call stop_activity path without clock
enabled which will cause system hang then.
Actually, we need't go this path when clock is disabled, what we need to
do is just jump out.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/mv_udc_core.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 58edff9abcef..ad91de4d60d8 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1221,12 +1221,16 @@ static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
 			udc_start(udc);
 		}
 	} else if (udc->driver && udc->softconnect) {
+		if (!udc->active)
+			goto out;
+
 		/* stop all the transfer in queue*/
 		stop_activity(udc, udc->driver);
 		udc_stop(udc);
 		mv_udc_disable(udc);
 	}
 
+out:
 	spin_unlock_irqrestore(&udc->lock, flags);
 	return retval;
 }
-- 
cgit v1.2.3


From 4fefe9f6de3d6e0b5e58b17cbab9c47c74f88cb6 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik
Date: Thu, 19 Jul 2012 00:20:11 +0200
Subject: usb composite: fix locking in usb_function_activate

The lockdep hunter mentions a non consistent usage of spin_lock and
spin_lock_irqsafe in the composite_disconnect and usb_function_activate
function:

[   15.700897] =================================
[   15.705255] [ INFO: inconsistent lock state ]
[   15.709617] 3.5.0-rc5+ #413 Not tainted
[   15.713453] ---------------------------------
[   15.717812] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[   15.723822] uvc-gadget/116 [HC1[1]:SC0[0]:HE0:SE1] takes:
[   15.729222]  (&(&cdev->lock)->rlock){?.+...}, at: [<7f0049e8>] composite_disconnect+0x2c/0x74 [g_webcam]
[   15.738797] {HARDIRQ-ON-W} state was registered at:
[   15.743677]   [<8006de3c>] mark_lock+0x148/0x688
[   15.748325]   [<8006ecb0>] __lock_acquire+0x934/0x1b74
[   15.753481]   [<8007047c>] lock_acquire+0x98/0x138
[   15.758288]   [<804c776c>] _raw_spin_lock+0x4c/0x84
[   15.763188]   [<7f006ae4>] usb_function_activate+0x28/0x94 [g_webcam]
[   15.769652]   [<7f00820c>] usb_ep_autoconfig_reset+0x78/0x98 [g_webcam]
[   15.776287]   [<7f0082a4>] uvc_v4l2_open+0x78/0x94 [g_webcam]
[   15.782054]   [<80366a38>] v4l2_open+0x104/0x130
[   15.786697]   [<800efd30>] chrdev_open+0xa0/0x170
[   15.791423]   [<800e9718>] do_dentry_open.isra.13+0x1e8/0x264
[   15.797186]   [<800ea5d4>] nameidata_to_filp+0x58/0x94
[   15.802340]   [<800fa29c>] do_last.isra.31+0x2a0/0x808
[   15.807497]   [<800faa40>] path_openat+0xc8/0x3e8
[   15.812216]   [<800fae90>] do_filp_open+0x3c/0x90
[   15.816936]   [<800ea6fc>] do_sys_open+0xec/0x184
[   15.821655]   [<800ea7c4>] sys_open+0x30/0x34
[   15.826027]   [<8000e5c0>] ret_fast_syscall+0x0/0x48
[   15.831015] irq event stamp: 6048
[   15.834330] hardirqs last  enabled at (6047): [<804c81b8>] _raw_spin_unlock_irqrestore+0x40/0x54
[   15.843132] hardirqs last disabled at (6048): [<8000e174>] __irq_svc+0x34/0x60
[   15.850370] softirqs last  enabled at (5940): [<80028380>] __do_softirq+0x188/0x270
[   15.858043] softirqs last disabled at (5935): [<80028944>] irq_exit+0xa0/0xa8
[   15.865195]
[   15.865195] other info that might help us debug this:
[   15.871724]  Possible unsafe locking scenario:
[   15.871724]
[   15.877645]        CPU0
[   15.880091]        ----
[   15.882537]   lock(&(&cdev->lock)->rlock);
[   15.886659]   <Interrupt>
[   15.889278]     lock(&(&cdev->lock)->rlock);
[   15.893573]
[   15.893573]  *** DEADLOCK ***
[   15.893573]
[   15.899496] no locks held by uvc-gadget/116.
[   15.903765]
[   15.903765] stack backtrace:
[   15.908125] Backtrace:
[   15.910604] [<80012038>] (dump_backtrace+0x0/0x114) from [<804bf8a4>] (dump_stack+0x20/0x24)
[   15.919043]  r6:dfb8e6f0 r5:dfb8e400 r4:809717ec r3:60000193
[   15.924766] [<804bf884>] (dump_stack+0x0/0x24) from [<804c0c0c>] (print_usage_bug+0x258/0x2c0)
[   15.933388] [<804c09b4>] (print_usage_bug+0x0/0x2c0) from [<8006e240>] (mark_lock+0x54c/0x688)
[   15.942006] [<8006dcf4>] (mark_lock+0x0/0x688) from [<8006edb8>] (__lock_acquire+0xa3c/0x1b74)
[   15.950625] [<8006e37c>] (__lock_acquire+0x0/0x1b74) from [<8007047c>] (lock_acquire+0x98/0x138)
[   15.959418] [<800703e4>] (lock_acquire+0x0/0x138) from [<804c78fc>] (_raw_spin_lock_irqsave+0x58/0x94)
[   15.968736] [<804c78a4>] (_raw_spin_lock_irqsave+0x0/0x94) from [<7f0049e8>] (composite_disconnect+0x2c/0x74 [g_webcam])
[   15.979605]  r7:00000012 r6:df82b0c4 r5:ded755bc r4:ded75580
[   15.985331] [<7f0049bc>] (composite_disconnect+0x0/0x74 [g_webcam]) from [<8033c170>] (_gadget_stop_activity+0xc4/0x120)
[   15.996200]  r6:df82b0c4 r5:df82b0c8 r4:df82b0d0 r3:7f0049bc
[   16.001919] [<8033c0ac>] (_gadget_stop_activity+0x0/0x120) from [<8033e390>] (udc_irq+0x724/0xcb8)
[   16.010877]  r6:df82b010 r5:00000000 r4:df82b010 r3:00000000
[   16.016595] [<8033dc6c>] (udc_irq+0x0/0xcb8) from [<8033baec>] (ci_irq+0x64/0xdc)
[   16.024086] [<8033ba88>] (ci_irq+0x0/0xdc) from [<80086538>] (handle_irq_event_percpu+0x74/0x298)
[   16.032958]  r5:807fd414 r4:df38fdc0
[   16.036566] [<800864c4>] (handle_irq_event_percpu+0x0/0x298) from [<800867a8>] (handle_irq_event+0x4c/0x6c)
[   16.046315] [<8008675c>] (handle_irq_event+0x0/0x6c) from [<80089318>] (handle_level_irq+0xbc/0x11c)
[   16.055447]  r6:def04000 r5:807fd414 r4:807fd3c0 r3:00020000
[   16.061166] [<8008925c>] (handle_level_irq+0x0/0x11c) from [<80085cc8>] (generic_handle_irq+0x38/0x4c)
[   16.070472]  r5:807f7f64 r4:8081e9f8
[   16.074082] [<80085c90>] (generic_handle_irq+0x0/0x4c) from [<8000ef98>] (handle_IRQ+0x5c/0xbc)
[   16.082788] [<8000ef3c>] (handle_IRQ+0x0/0xbc) from [<800085cc>] (tzic_handle_irq+0x6c/0x9c)
[   16.091225]  r8:00000000 r7:def059b0 r6:00000001 r5:00000000 r4:00000000
r3:00000012
[   16.099141] [<80008560>] (tzic_handle_irq+0x0/0x9c) from [<8000e184>] (__irq_svc+0x44/0x60)
[   16.107494] Exception stack(0xdef059b0 to 0xdef059f8)
[   16.112550] 59a0:                                     00000001 00000001 00000000 dfb8e400
[   16.120732] 59c0: 40000013 81a2e500 00000000 81a2e500 00000000 00000000 80862418 def05a0c
[   16.128912] 59e0: def059c8 def059f8 80070e24 804c81bc 20000013 ffffffff
[   16.135542] [<804c8178>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<8003d0ec>] (__queue_work+0x108/0x470)
[   16.145369]  r5:dfb1a30c r4:81b93c00
[   16.148978] [<8003cfe4>] (__queue_work+0x0/0x470) from [<8003d4e0>] (queue_work_on+0x4c/0x54)
[   16.157511] [<8003d494>] (queue_work_on+0x0/0x54) from [<8003d544>] (queue_work+0x30/0x34)
[   16.165774]  r6:df2e6900 r5:80e0c2f8 r4:dfb1a2c8 r3:def04000
[   16.171495] [<8003d514>] (queue_work+0x0/0x34) from [<80493284>] (rpc_make_runnable+0x9c/0xac)
[   16.180113] [<804931e8>] (rpc_make_runnable+0x0/0xac) from [<80493c88>] (rpc_execute+0x40/0xa8)
[   16.188811]  r5:def05ad4 r4:dfb1a2c8
[   16.192426] [<80493c48>] (rpc_execute+0x0/0xa8) from [<8048c734>] (rpc_run_task+0xa8/0xb4)
[   16.200690]  r8:00000001 r7:df74f520 r6:ded75700 r5:def05ad4 r4:dfb1a2c8
r3:00000002
[   16.208618] [<8048c68c>] (rpc_run_task+0x0/0xb4) from [<801f1608>] (nfs_initiate_read+0xb4/0xd4)
[   16.217403]  r5:df3e86c0 r4:00000000
[   16.221015] [<801f1554>] (nfs_initiate_read+0x0/0xd4) from [<801f1c64>] (nfs_generic_pg_readpages+0x9c/0x114)
[   16.230937] [<801f1bc8>] (nfs_generic_pg_readpages+0x0/0x114) from [<801f0744>] (__nfs_pageio_add_request+0xe8/0x214)
[   16.241545]  r8:000bf000 r7:00000000 r6:00000000 r5:deef4640 r4:def05c1c
r3:801f1bc8
[   16.249463] [<801f065c>] (__nfs_pageio_add_request+0x0/0x214) from [<801f0e3c>] (nfs_pageio_add_request+0x28/0x54)
[   16.259818] [<801f0e14>] (nfs_pageio_add_request+0x0/0x54) from [<801f1394>] (readpage_async_filler+0x114/0x170)
[   16.269992]  r5:def05c58 r4:80fd7300
[   16.273607] [<801f1280>] (readpage_async_filler+0x0/0x170) from [<800bb418>] (read_cache_pages+0xa0/0x108)
[   16.283259]  r8:00200200 r7:00100100 r6:df74f654 r5:def05cd0 r4:80fd7300
[   16.290034] [<800bb378>] (read_cache_pages+0x0/0x108) from [<801f218c>] (nfs_readpages+0xc4/0x168)
[   16.298999] [<801f20c8>] (nfs_readpages+0x0/0x168) from [<800bb1d0>] (__do_page_cache_readahead+0x254/0x354)
[   16.308833] [<800baf7c>] (__do_page_cache_readahead+0x0/0x354) from [<800bb5d0>] (ra_submit+0x38/0x40)
[   16.318145] [<800bb598>] (ra_submit+0x0/0x40) from [<800bb6b0>] (ondemand_readahead+0xd8/0x3b0)
[   16.326851] [<800bb5d8>] (ondemand_readahead+0x0/0x3b0) from [<800bba20>] (page_cache_async_readahead+0x98/0xa8)
[   16.337043] [<800bb988>] (page_cache_async_readahead+0x0/0xa8) from [<800b2118>] (generic_file_aio_read+0x5b4/0x7c4)
[   16.347565]  r6:00000000 r5:df74f654 r4:80fd70a0
[   16.352231] [<800b1b64>] (generic_file_aio_read+0x0/0x7c4) from [<801e82c0>] (nfs_file_read+0x7c/0xcc)
[   16.361544] [<801e8244>] (nfs_file_read+0x0/0xcc) from [<800eab80>] (do_sync_read+0xb4/0xf4)
[   16.369981]  r9:00000000 r8:def05f70 r7:00000000 r6:00000000 r5:dec34900
r4:fffffdee
[   16.377896] [<800eaacc>] (do_sync_read+0x0/0xf4) from [<800eb548>] (vfs_read+0xb4/0x144)
[   16.385987]  r8:00000000 r7:def05f70 r6:76a95008 r5:003e3dd6 r4:dec34900
[   16.392761] [<800eb494>] (vfs_read+0x0/0x144) from [<800eb624>] (sys_read+0x4c/0x78)
[   16.400504]  r8:00000000 r7:00000003 r6:003e3dd6 r5:76a95008 r4:dec34900
[   16.407279] [<800eb5d8>] (sys_read+0x0/0x78) from [<8000e5c0>] (ret_fast_syscall+0x0/0x48)
[   16.415543]  r9:def04000 r8:8000e864 r6:000086b4 r5:00000000 r4:00000000
[   20.872729]  gadget: high-speed config #1: Video
[   20.877368]  gadget: uvc_function_set_alt(0, 0)
[   20.881908]  gadget: uvc_function_set_alt(1, 0)
[   20.891464]  gadget: uvc_function_set_alt(1, 0)

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 3f72110da1b0..2cb1030203b5 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -300,9 +300,10 @@ int usb_function_deactivate(struct usb_function *function)
 int usb_function_activate(struct usb_function *function)
 {
 	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
 	int				status = 0;
 
-	spin_lock(&cdev->lock);
+	spin_lock_irqsave(&cdev->lock, flags);
 
 	if (WARN_ON(cdev->deactivations == 0))
 		status = -EINVAL;
@@ -312,7 +313,7 @@ int usb_function_activate(struct usb_function *function)
 			status = usb_gadget_connect(cdev->gadget);
 	}
 
-	spin_unlock(&cdev->lock);
+	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
 
-- 
cgit v1.2.3


From 2868fea2d615d9f445a0ccaf988e1418a9787ebe Mon Sep 17 00:00:00 2001
From: Du, Changbin
Date: Tue, 24 Jul 2012 08:19:25 +0800
Subject: usb: gadget: s3c-hsotg: fix core reset timeout failure

The timeout values were 1000 and timeout issue occured many times on my
s3c6410 Soc based board (mostly when booting whith USB cable not
connected). This patch increase the values to 10000 to guarantee the
success of reset.

Having set timeout to 10000, I printed the remained timeout values
which could cause timeout issue before this change (tested several
times).
the first timeout value remained:
	timeout = 8079
	timeout = 8079
	timeout = 8078
	timeout = 8081
the second timeout value remained:
	timeout = 7940
	timeout = 7945
	timeout = 7940
	timeout = 7938
Seeing from above values, I think the value 10000 is big enough.

Signed-off-by: Du, Changbin <changbin.du@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b13e0bb5f5b8..a826cb98d306 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2197,7 +2197,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 	/* issue soft reset */
 	writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL);
 
-	timeout = 1000;
+	timeout = 10000;
 	do {
 		grstctl = readl(hsotg->regs + GRSTCTL);
 	} while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0);
@@ -2207,7 +2207,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 		return -EINVAL;
 	}
 
-	timeout = 1000;
+	timeout = 10000;
 
 	while (1) {
 		u32 grstctl = readl(hsotg->regs + GRSTCTL);
-- 
cgit v1.2.3


From d3091cfff73ce44c6b0cb61b25074f0ac648604f Mon Sep 17 00:00:00 2001
From: Andy Shevchenko
Date: Tue, 7 Aug 2012 19:07:58 +0300
Subject: usb: gadget: use native print_hex_dump_bytes()

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/rndis.c | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index b35babed6fcb..e4192b887de9 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -863,26 +863,8 @@ int rndis_msg_parser(u8 configNr, u8 *buf)
 		 */
 		pr_warning("%s: unknown RNDIS message 0x%08X len %d\n",
 			__func__, MsgType, MsgLength);
-		{
-			unsigned i;
-			for (i = 0; i < MsgLength; i += 16) {
-				pr_debug("%03d: "
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					"\n",
-					i,
-					buf[i], buf [i+1],
-						buf[i+2], buf[i+3],
-					buf[i+4], buf [i+5],
-						buf[i+6], buf[i+7],
-					buf[i+8], buf [i+9],
-						buf[i+10], buf[i+11],
-					buf[i+12], buf [i+13],
-						buf[i+14], buf[i+15]);
-			}
-		}
+		print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET,
+				     buf, MsgLength);
 		break;
 	}
 
-- 
cgit v1.2.3


From 974e9323deefbab923d7aa8f0e4bcf9066c2ec97 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee
Date: Thu, 9 Aug 2012 11:23:52 +0300
Subject: usb: gadget: udc-core: Race between disconnect/unbind and setup

usb_gadget_remove_driver() runs through a four-step sequence to shut down
the gadget driver.  For the case of a composite gadget + at91 UDC, this
would look like:

    udc->driver->disconnect(udc->gadget);          // composite_disconnect()
    usb_gadget_disconnect(udc->gadget);            // at91_pullup(gadget, 0)
    udc->driver->unbind(udc->gadget);              // composite_unbind()
    usb_gadget_udc_stop(udc->gadget, udc->driver); // at91_stop()

The UDC driver can receive SETUP packets from the host up until the
point when usb_gadget_disconnect() returns.  On rare occasions, the
gadget driver may see this sequence:

    udc->driver->disconnect(udc->gadget);          // composite_disconnect()
    udc->driver->setup(udc->gadget, &ctrl);        // composite_setup()
    udc->driver->unbind(udc->gadget);              // composite_unbind()

Some gadget drivers, such as composite, assume this will never happen
and crash as a result.

The fix is to quiesce the UDC hardware (via usb_gadget_disconnect)
before running the gadget driver through the disconnect/unbind sequence.

Reviewed-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/udc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index e5e44f8cde9a..bae243c23141 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -262,8 +262,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	if (udc_is_newstyle(udc)) {
-		udc->driver->disconnect(udc->gadget);
 		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
 	} else {
-- 
cgit v1.2.3


From 8c7ca99250de69dfe97c5f4f6e2eb11dc6145779 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko
Date: Fri, 6 Jul 2012 18:30:21 +0300
Subject: usb: gadget: use %pm to print mac addresses

%pm already provides pretty print for mac addresses, let's
use that and drop homebrew mac address printing.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_ecm.c    | 5 +----
 drivers/usb/gadget/f_ncm.c    | 5 +----
 drivers/usb/gadget/f_subset.c | 5 +----
 3 files changed, 3 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 30b908f2a53d..95bc94f8e570 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -897,10 +897,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(ecm->ethaddr, sizeof ecm->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr);
 	ecm_string_defs[1].s = ecm->ethaddr;
 
 	ecm->port.cdc_filter = DEFAULT_FILTER;
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index aab8eded045b..b651b529c67f 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -1346,10 +1346,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(ncm->ethaddr, sizeof ncm->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr);
 	ncm_string_defs[1].s = ncm->ethaddr;
 
 	spin_lock_init(&ncm->lock);
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 21ab474aca07..4060c0bd9785 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -436,10 +436,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(geth->ethaddr, sizeof geth->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr);
 	geth_string_defs[1].s = geth->ethaddr;
 
 	geth->port.cdc_filter = DEFAULT_FILTER;
-- 
cgit v1.2.3


From 4e177260e547e438c78c60b6db6f755bb89e0596 Mon Sep 17 00:00:00 2001
From: Shimoda, Yoshihiro
Date: Mon, 20 Aug 2012 18:39:23 +0900
Subject: usb: renesas_usbhs: modify the irq handler for sharing irq

When IORESOURCE_IRQ_SHAREABLE is set, the irq handler may be called
even if the interupt of the USB module doesn't happen. So, it may
clear the interrupt flags by mistake. This patch fixes it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/renesas_usbhs/mod.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 82a628f96c03..35c5208f3249 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -209,14 +209,18 @@ int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state)
 	return (int)irq_state->intsts0 & CTSQ_MASK;
 }
 
-static void usbhs_status_get_each_irq(struct usbhs_priv *priv,
-				      struct usbhs_irq_state *state)
+static int usbhs_status_get_each_irq(struct usbhs_priv *priv,
+				     struct usbhs_irq_state *state)
 {
 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	u16 intenb0, intenb1;
 
 	state->intsts0 = usbhs_read(priv, INTSTS0);
 	state->intsts1 = usbhs_read(priv, INTSTS1);
 
+	intenb0 = usbhs_read(priv, INTENB0);
+	intenb1 = usbhs_read(priv, INTENB1);
+
 	/* mask */
 	if (mod) {
 		state->brdysts = usbhs_read(priv, BRDYSTS);
@@ -226,6 +230,20 @@ static void usbhs_status_get_each_irq(struct usbhs_priv *priv,
 		state->bempsts &= mod->irq_bempsts;
 		state->brdysts &= mod->irq_brdysts;
 	}
+
+	/*
+	 * Check whether the irq enable registers and the irq status are set
+	 * when IRQF_SHARED is set.
+	 */
+	if (priv->irqflags & IRQF_SHARED) {
+		if (!(intenb0 & state->intsts0) &&
+		    !(intenb1 & state->intsts1) &&
+		    !(state->bempsts) &&
+		    !(state->brdysts))
+			return -EIO;
+	}
+
+	return 0;
 }
 
 /*
@@ -238,7 +256,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	struct usbhs_priv *priv = data;
 	struct usbhs_irq_state irq_state;
 
-	usbhs_status_get_each_irq(priv, &irq_state);
+	if (usbhs_status_get_each_irq(priv, &irq_state) < 0)
+		return IRQ_NONE;
 
 	/*
 	 * clear interrupt
-- 
cgit v1.2.3


From 252d8cec49a79d26fafb845337dd16e5e1012c1b Mon Sep 17 00:00:00 2001
From: Roland Stigge
Date: Mon, 20 Aug 2012 10:30:12 +0200
Subject: usb: gadget: lpc32xx_udc: Port to new start/stop interface

This patch adjusts the LPC32xx USB gadget driver to the new udc_start /
udc_stop interface.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 49 ++++++++++++----------------------------
 1 file changed, 14 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index f1ec99e69cb7..7e31ac2bf224 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2599,9 +2599,8 @@ static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
-static int lpc32xx_start(struct usb_gadget_driver *driver,
-			 int (*bind)(struct usb_gadget *));
-static int lpc32xx_stop(struct usb_gadget_driver *driver);
+static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int lpc32xx_stop(struct usb_gadget *, struct usb_gadget_driver *);
 
 static const struct usb_gadget_ops lpc32xx_udc_ops = {
 	.get_frame		= lpc32xx_get_frame,
@@ -2609,8 +2608,8 @@ static const struct usb_gadget_ops lpc32xx_udc_ops = {
 	.set_selfpowered	= lpc32xx_set_selfpowered,
 	.vbus_session		= lpc32xx_vbus_session,
 	.pullup			= lpc32xx_pullup,
-	.start			= lpc32xx_start,
-	.stop			= lpc32xx_stop,
+	.udc_start		= lpc32xx_start,
+	.udc_stop		= lpc32xx_stop,
 };
 
 static void nop_release(struct device *dev)
@@ -2987,14 +2986,13 @@ static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
 	return IRQ_HANDLED;
 }
 
-static int lpc32xx_start(struct usb_gadget_driver *driver,
-			 int (*bind)(struct usb_gadget *))
+static int lpc32xx_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
 {
-	struct lpc32xx_udc *udc = &controller;
-	int retval, i;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+	int i;
 
-	if (!driver || driver->max_speed < USB_SPEED_FULL ||
-	    !bind || !driver->setup) {
+	if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
 		dev_err(udc->dev, "bad parameter.\n");
 		return -EINVAL;
 	}
@@ -3011,18 +3009,6 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 	udc->selfpowered = 1;
 	udc->vbus = 0;
 
-	retval = bind(&udc->gadget);
-	if (retval) {
-		dev_err(udc->dev, "bind() returned %d\n", retval);
-		udc->enabled = 0;
-		udc->selfpowered = 0;
-		udc->driver = NULL;
-		udc->gadget.dev.driver = NULL;
-		return retval;
-	}
-
-	dev_dbg(udc->dev, "bound to %s\n", driver->driver.name);
-
 	/* Force VBUS process once to check for cable insertion */
 	udc->last_vbus = udc->vbus = 0;
 	schedule_work(&udc->vbus_job);
@@ -3034,22 +3020,19 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 	return 0;
 }
 
-static int lpc32xx_stop(struct usb_gadget_driver *driver)
+static int lpc32xx_stop(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver)
 {
 	int i;
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc = to_udc(gadget);
 
-	if (!driver || driver != udc->driver || !driver->unbind)
+	if (!driver || driver != udc->driver)
 		return -EINVAL;
 
-	/* Disable USB pullup */
-	isp1301_pullup_enable(udc, 0, 1);
-
 	for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
 		disable_irq(udc->udp_irq[i]);
 
 	if (udc->clocked) {
-
 		spin_lock(&udc->lock);
 		stop_activity(udc);
 		spin_unlock(&udc->lock);
@@ -3069,20 +3052,16 @@ static int lpc32xx_stop(struct usb_gadget_driver *driver)
 	}
 
 	udc->enabled = 0;
-	pullup(udc, 0);
-
-	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
-	dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name);
 	return 0;
 }
 
 static void lpc32xx_udc_shutdown(struct platform_device *dev)
 {
 	/* Force disconnect on reboot */
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc = platform_get_drvdata(dev);
 
 	pullup(udc, 0);
 }
-- 
cgit v1.2.3


From 78ca9139736f059b70bd797b01227271e0efa681 Mon Sep 17 00:00:00 2001
From: Roland Stigge
Date: Mon, 20 Aug 2012 10:30:13 +0200
Subject: usb: gadget: lpc32xx_udc: Remove usb_endpoint_descriptor

This patch removes the utilization of struct usb_endpoint_descriptor, as done
by other drivers also. This was done on request by the USB gadget maintainers,
since this API is obsoleted.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 7e31ac2bf224..6dd8f69886e0 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -141,8 +141,6 @@ struct lpc32xx_ep {
 	u32                     totalints;
 
 	bool			wedge;
-
-	const struct usb_endpoint_descriptor *desc;
 };
 
 /*
@@ -556,10 +554,8 @@ static int proc_udc_show(struct seq_file *s, void *unused)
 
 	if (udc->enabled && udc->vbus) {
 		proc_ep_show(s, &udc->ep[0]);
-		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-			if (ep->desc)
-				proc_ep_show(s, ep);
-		}
+		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
+			proc_ep_show(s, ep);
 	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1453,7 +1449,6 @@ static void udc_reinit(struct lpc32xx_udc *udc)
 
 		if (i != 0)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-		ep->desc = NULL;
 		ep->ep.maxpacket = ep->maxpacket;
 		INIT_LIST_HEAD(&ep->queue);
 		ep->req_pending = 0;
@@ -1515,7 +1510,7 @@ static void nuke(struct lpc32xx_ep *ep, int status)
 		done(ep, req, status);
 	}
 
-	if (ep->desc && status == -ESHUTDOWN) {
+	if (status == -ESHUTDOWN) {
 		uda_disable_hwepint(ep->udc, ep->hwep_num);
 		udc_disable_hwep(ep->udc, ep->hwep_num);
 	}
@@ -1658,9 +1653,6 @@ static int lpc32xx_ep_disable(struct usb_ep *_ep)
 
 	nuke(ep, -ESHUTDOWN);
 
-	/* restore the endpoint's pristine config */
-	ep->desc = NULL;
-
 	/* Clear all DMA statuses for this EP */
 	udc_ep_dma_disable(udc, ep->hwep_num);
 	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
@@ -1696,7 +1688,7 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep,
 	unsigned long flags;
 
 	/* Verify EP data */
-	if ((!_ep) || (!ep) || (!desc) || (ep->desc) ||
+	if ((!_ep) || (!ep) || (!desc) ||
 	    (desc->bDescriptorType != USB_DT_ENDPOINT)) {
 		dev_dbg(udc->dev, "bad ep or descriptor\n");
 		return -EINVAL;
@@ -1754,7 +1746,6 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep,
 
 	/* Initialize endpoint to match the selected descriptor */
 	ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
-	ep->desc = desc;
 	ep->ep.maxpacket = maxpacket;
 
 	/* Map hardware endpoint from base and direction */
@@ -1837,7 +1828,7 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep,
 
 	udc = ep->udc;
 
-	if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) {
+	if (!_ep) {
 		dev_dbg(udc->dev, "invalid ep\n");
 		return -EINVAL;
 	}
@@ -1976,7 +1967,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
 	struct lpc32xx_udc *udc = ep->udc;
 	unsigned long flags;
 
-	if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1))
+	if ((!ep) || (ep->hwep_num <= 1))
 		return -EINVAL;
 
 	/* Don't halt an IN EP */
@@ -2262,7 +2253,7 @@ static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex)
 	case USB_RECIP_ENDPOINT:
 		tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
 		ep = &udc->ep[tmp];
-		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc))
+		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS))
 			return -EOPNOTSUPP;
 
 		if (wIndex & USB_DIR_IN) {
-- 
cgit v1.2.3


From c4846a1807fc6138e2f010d65757feb4b7b0c2cf Mon Sep 17 00:00:00 2001
From: Roland Stigge
Date: Mon, 20 Aug 2012 10:30:14 +0200
Subject: usb: gadget: lpc32xx_udc: Support multiple controllers

The lpc32xx_udc driver supported only one controller by defining a global
static struct for it. This patch enables multiple instances of the controller
by dynamic allocation of the struct at probe(). A static struct is kept as a
template on initialization since it does some complex preset, reflecting fixed
hardware endpoint structure.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 55 +++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 26 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 6dd8f69886e0..a0195f20bf3b 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2608,10 +2608,9 @@ static void nop_release(struct device *dev)
 	/* nothing to free */
 }
 
-static struct lpc32xx_udc controller = {
+static const struct lpc32xx_udc controller_template = {
 	.gadget = {
 		.ops	= &lpc32xx_udc_ops,
-		.ep0	= &controller.ep[0].ep,
 		.name	= driver_name,
 		.dev	= {
 			.init_name = "gadget",
@@ -2623,7 +2622,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep0",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 0,
 		.hwep_num	= 0, /* Can be 0 or 1, has special handling */
@@ -2635,7 +2633,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep1-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 2,
 		.hwep_num	= 0, /* 2 or 3, will be set later */
@@ -2647,7 +2644,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep2-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 4,
 		.hwep_num	= 0, /* 4 or 5, will be set later */
@@ -2659,7 +2655,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep3-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 6,
 		.hwep_num	= 0, /* 6 or 7, will be set later */
@@ -2671,7 +2666,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep4-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 8,
 		.hwep_num	= 0, /* 8 or 9, will be set later */
@@ -2683,7 +2677,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep5-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 10,
 		.hwep_num	= 0, /* 10 or 11, will be set later */
@@ -2695,7 +2688,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep6-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 12,
 		.hwep_num	= 0, /* 12 or 13, will be set later */
@@ -2707,7 +2699,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep7-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 14,
 		.hwep_num	= 0,
@@ -2719,7 +2710,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep8-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 16,
 		.hwep_num	= 0,
@@ -2731,7 +2721,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep9-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 18,
 		.hwep_num	= 0,
@@ -2743,7 +2732,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep10-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 20,
 		.hwep_num	= 0,
@@ -2755,7 +2743,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep11-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 22,
 		.hwep_num	= 0,
@@ -2767,7 +2754,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep12-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 24,
 		.hwep_num	= 0,
@@ -2779,7 +2765,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep13-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 26,
 		.hwep_num	= 0,
@@ -2791,7 +2776,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep14-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 28,
 		.hwep_num	= 0,
@@ -2803,7 +2787,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep15-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 30,
 		.hwep_num	= 0,
@@ -3090,12 +3073,21 @@ static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F;
 static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc;
 	int retval, i;
 	struct resource *res;
 	dma_addr_t dma_handle;
 	struct device_node *isp1301_node;
 
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	memcpy(udc, &controller_template, sizeof(*udc));
+	for (i = 0; i <= 15; i++)
+		udc->ep[i].udc = udc;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+
 	/* init software state */
 	udc->gadget.dev.parent = dev;
 	udc->pdev = pdev;
@@ -3110,8 +3102,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	}
 
 	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
-	if (!udc->isp1301_i2c_client)
-		return -EPROBE_DEFER;
+	if (!udc->isp1301_i2c_client) {
+		retval = -EPROBE_DEFER;
+		goto phy_fail;
+	}
 
 	dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
 		 udc->isp1301_i2c_client->addr);
@@ -3130,8 +3124,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	 *  IORESOURCE_IRQ, USB transceiver interrupt number
 	 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
+	if (!res) {
+		retval = -ENXIO;
+		goto resource_fail;
+	}
 
 	spin_lock_init(&udc->lock);
 
@@ -3141,7 +3137,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		if (udc->udp_irq[i] < 0) {
 			dev_err(udc->dev,
 				"irq resource %d not available!\n", i);
-			return udc->udp_irq[i];
+			retval = udc->udp_irq[i];
+			goto irq_fail;
 		}
 	}
 
@@ -3149,7 +3146,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	udc->io_p_size = resource_size(res);
 	if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) {
 		dev_err(udc->dev, "someone's using UDC memory\n");
-		return -EBUSY;
+		retval = -EBUSY;
+		goto request_mem_region_fail;
 	}
 
 	udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size);
@@ -3346,7 +3344,11 @@ pll_get_fail:
 io_map_fail:
 	release_mem_region(udc->io_p_start, udc->io_p_size);
 	dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
-
+request_mem_region_fail:
+irq_fail:
+resource_fail:
+phy_fail:
+	kfree(udc);
 	return retval;
 }
 
@@ -3384,6 +3386,7 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 	clk_put(udc->usb_pll_clk);
 	iounmap(udc->udp_baseaddr);
 	release_mem_region(udc->io_p_start, udc->io_p_size);
+	kfree(udc);
 
 	return 0;
 }
-- 
cgit v1.2.3


From d0d860758bd350206242962a223858bd01cd8a93 Mon Sep 17 00:00:00 2001
From: Alan Stern
Date: Mon, 20 Aug 2012 16:12:47 -0400
Subject: usb: gadget: dummy-hcd: remember to update driver pointer

This patch (as1599) fixes dummy-hcd to make it update the appropriate
driver pointer when a new gadget driver is bound or unbound.  Without
this change, the gadget driver's name doesn't appear in dev_printk
output.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/dummy_hcd.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index b799106027ad..91916f693ff7 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -909,6 +909,7 @@ static int dummy_udc_start(struct usb_gadget *g,
 	dum->devstatus = 0;
 
 	dum->driver = driver;
+	dum->gadget.dev.driver = &driver->driver;
 	dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;
@@ -923,6 +924,7 @@ static int dummy_udc_stop(struct usb_gadget *g,
 	dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
 			driver->driver.name);
 
+	dum->gadget.dev.driver = NULL;
 	dum->driver = NULL;
 
 	return 0;
-- 
cgit v1.2.3


From 2e8e25b882f8077c5fb38c111c0cb0fb079fb62d Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Wed, 22 Aug 2012 15:48:58 +0530
Subject: usb: gadget: s3c2410_udc: Replace <asm/io.h> with <linux/io.h>

Fixes the following warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c2410_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index f2e51f50e528..7acecc0acf18 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -35,7 +36,6 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <mach/irqs.h>
-- 
cgit v1.2.3


From c2892cd4d9251d62419b731816633b9041fa7e3c Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Wed, 22 Aug 2012 15:48:59 +0530
Subject: usb: gadget: s3c2410_udc: Use pr_* and dev_err functions

Replace printk with corresponding pr_* and dev_err functions.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c2410_udc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 7acecc0acf18..55a571e15cd2 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -12,6 +12,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) "s3c2410_udc: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -115,7 +117,7 @@ static int dprintk(int level, const char *fmt, ...)
 			sizeof(printk_buf)-len, fmt, args);
 	va_end(args);
 
-	return printk(KERN_DEBUG "%s", printk_buf);
+	return pr_debug("%s", printk_buf);
 }
 #else
 static int dprintk(int level, const char *fmt, ...)
@@ -1683,13 +1685,13 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 		return -EBUSY;
 
 	if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) {
-		printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n",
+		dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n",
 			bind, driver->setup, driver->max_speed);
 		return -EINVAL;
 	}
 #if defined(MODULE)
 	if (!driver->unbind) {
-		printk(KERN_ERR "Invalid driver: no unbind method\n");
+		dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n");
 		return -EINVAL;
 	}
 #endif
@@ -1700,7 +1702,7 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 
 	/* Bind the driver */
 	if ((retval = device_add(&udc->gadget.dev)) != 0) {
-		printk(KERN_ERR "Error in device_add() : %d\n",retval);
+		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
 		goto register_error;
 	}
 
@@ -2073,7 +2075,7 @@ static int __init udc_init(void)
 
 	s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
 	if (IS_ERR(s3c2410_udc_debugfs_root)) {
-		printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
+		pr_err("%s: debugfs dir creation failed %ld\n",
 			gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
 		s3c2410_udc_debugfs_root = NULL;
 	}
-- 
cgit v1.2.3


From ff24166c3996a343f3901a47bd5fef6181ac21f9 Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Wed, 22 Aug 2012 15:49:00 +0530
Subject: usb: gadget: s3c2410_udc: Silence checkpatch errors and warnings

Silences about 75 errors and warnings related to
- Spacing
- Alignment of braces
- Line over 80 characters

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c2410_udc.c | 124 +++++++++++++++++++--------------------
 1 file changed, 60 insertions(+), 64 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 55a571e15cd2..d9e3a21b3ddc 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -127,10 +127,10 @@ static int dprintk(int level, const char *fmt, ...)
 #endif
 static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 {
-	u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
+	u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg;
 	u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
-	u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2;
-	u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2;
+	u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2;
+	u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2;
 
 	addr_reg       = udc_read(S3C2410_UDC_FUNC_ADDR_REG);
 	pwr_reg        = udc_read(S3C2410_UDC_PWR_REG);
@@ -166,10 +166,10 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 		 "EP2_I_CSR2     : 0x%04X\n"
 		 "EP2_O_CSR1     : 0x%04X\n"
 		 "EP2_O_CSR2     : 0x%04X\n",
-			addr_reg,pwr_reg,ep_int_reg,usb_int_reg,
+			addr_reg, pwr_reg, ep_int_reg, usb_int_reg,
 			ep_int_en_reg, usb_int_en_reg, ep0_csr,
-			ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2,
-			ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2
+			ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2,
+			ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2
 		);
 
 	return 0;
@@ -232,7 +232,7 @@ static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base)
 {
 	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
 
-	udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY
+	udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY
 				| S3C2410_UDC_EP0_CSR_DE),
 			S3C2410_UDC_EP0_CSR_REG);
 }
@@ -265,7 +265,7 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep,
 
 	list_del_init(&req->queue);
 
-	if (likely (req->req.status == -EINPROGRESS))
+	if (likely(req->req.status == -EINPROGRESS))
 		req->req.status = status;
 	else
 		status = req->req.status;
@@ -282,9 +282,9 @@ static void s3c2410_udc_nuke(struct s3c2410_udc *udc,
 	if (&ep->queue == NULL)
 		return;
 
-	while (!list_empty (&ep->queue)) {
+	while (!list_empty(&ep->queue)) {
 		struct s3c2410_request *req;
-		req = list_entry (ep->queue.next, struct s3c2410_request,
+		req = list_entry(ep->queue.next, struct s3c2410_request,
 				queue);
 		s3c2410_udc_done(ep, req, status);
 	}
@@ -391,10 +391,10 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
 
 		if (idx == 0) {
 			/* Reset signal => no need to say 'data sent' */
-			if (! (udc_read(S3C2410_UDC_USB_INT_REG)
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
 					& S3C2410_UDC_USBINT_RESET))
 				s3c2410_udc_set_ep0_de_in(base_addr);
-			ep->dev->ep0state=EP0_IDLE;
+			ep->dev->ep0state = EP0_IDLE;
 		} else {
 			udc_write(idx, S3C2410_UDC_INDEX_REG);
 			ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
@@ -408,7 +408,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
 	} else {
 		if (idx == 0) {
 			/* Reset signal => no need to say 'data sent' */
-			if (! (udc_read(S3C2410_UDC_USB_INT_REG)
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
 					& S3C2410_UDC_USBINT_RESET))
 				s3c2410_udc_set_ep0_ipr(base_addr);
 		} else {
@@ -444,7 +444,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 	u8		*buf;
 	u32		ep_csr;
 	unsigned	bufferspace;
-	int		is_last=1;
+	int		is_last = 1;
 	unsigned	avail;
 	int		fifo_count = 0;
 	u32		idx;
@@ -512,7 +512,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 	/* Only ep0 debug messages are interesting */
 	if (idx == 0)
 		dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n",
-			__func__, fifo_count,is_last);
+			__func__, fifo_count, is_last);
 
 	if (is_last) {
 		if (idx == 0) {
@@ -544,7 +544,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 
 static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq)
 {
-	unsigned char *outbuf = (unsigned char*)crq;
+	unsigned char *outbuf = (unsigned char *)crq;
 	int bytes_read = 0;
 
 	udc_write(0, S3C2410_UDC_INDEX_REG);
@@ -650,7 +650,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 
 	switch (crq->bRequest) {
 	case USB_REQ_SET_CONFIGURATION:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n");
 
 		if (crq->bRequestType == USB_RECIP_DEVICE) {
 			dev->req_config = 1;
@@ -659,7 +659,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_SET_INTERFACE:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n");
 
 		if (crq->bRequestType == USB_RECIP_INTERFACE) {
 			dev->req_config = 1;
@@ -668,7 +668,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_SET_ADDRESS:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n");
 
 		if (crq->bRequestType == USB_RECIP_DEVICE) {
 			tmp = crq->wValue & 0x7F;
@@ -681,13 +681,12 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_GET_STATUS:
-		dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n");
 		s3c2410_udc_clear_ep0_opr(base_addr);
 
 		if (dev->req_std) {
-			if (!s3c2410_udc_get_status(dev, crq)) {
+			if (!s3c2410_udc_get_status(dev, crq))
 				return;
-			}
 		}
 		break;
 
@@ -752,7 +751,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		/* deferred i/o == no response yet */
 	} else if (dev->req_pending) {
 		dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n");
-		dev->req_pending=0;
+		dev->req_pending = 0;
 	}
 
 	dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]);
@@ -803,16 +802,14 @@ static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev)
 
 	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
 		dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n");
-		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) {
+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req)
 			s3c2410_udc_write_fifo(ep, req);
-		}
 		break;
 
 	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
 		dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n");
-		if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) {
-			s3c2410_udc_read_fifo(ep,req);
-		}
+		if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
 		break;
 
 	case EP0_END_XFER:
@@ -838,7 +835,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	u32			ep_csr1;
 	u32			idx;
 
-	if (likely (!list_empty(&ep->queue)))
+	if (likely(!list_empty(&ep->queue)))
 		req = list_entry(ep->queue.next,
 				struct s3c2410_request, queue);
 	else
@@ -860,9 +857,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 			return;
 		}
 
-		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) {
-			s3c2410_udc_write_fifo(ep,req);
-		}
+		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req)
+			s3c2410_udc_write_fifo(ep, req);
 	} else {
 		udc_write(idx, S3C2410_UDC_INDEX_REG);
 		ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG);
@@ -875,9 +871,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 			return;
 		}
 
-		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
-			s3c2410_udc_read_fifo(ep,req);
-		}
+		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
 	}
 }
 
@@ -1059,7 +1054,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 	struct s3c2410_ep	*ep;
 	u32			max, tmp;
 	unsigned long		flags;
-	u32			csr1,csr2;
+	u32			csr1, csr2;
 	u32			int_en_reg;
 
 	ep = to_s3c2410_ep(_ep);
@@ -1075,7 +1070,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	max = usb_endpoint_maxp(desc) & 0x1fff;
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 	_ep->maxpacket = max & 0x7ff;
 	ep->ep.desc = desc;
 	ep->halted = 0;
@@ -1119,11 +1114,11 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	/* print some debug message */
 	tmp = desc->bEndpointAddress;
-	dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
-		 _ep->name,ep->num, tmp,
+	dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
+		 _ep->name, ep->num, tmp,
 		 desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max);
 
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 	s3c2410_udc_set_halt(_ep, 0);
 
 	return 0;
@@ -1151,7 +1146,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
 	ep->ep.desc = NULL;
 	ep->halted = 1;
 
-	s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN);
+	s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN);
 
 	/* disable irqs */
 	int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
@@ -1172,16 +1167,16 @@ s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags)
 {
 	struct s3c2410_request *req;
 
-	dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags);
+	dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags);
 
 	if (!_ep)
 		return NULL;
 
-	req = kzalloc (sizeof(struct s3c2410_request), mem_flags);
+	req = kzalloc(sizeof(struct s3c2410_request), mem_flags);
 	if (!req)
 		return NULL;
 
-	INIT_LIST_HEAD (&req->queue);
+	INIT_LIST_HEAD(&req->queue);
 	return &req->req;
 }
 
@@ -1199,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req)
 	if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name))
 		return;
 
-	WARN_ON (!list_empty (&req->queue));
+	WARN_ON(!list_empty(&req->queue));
 	kfree(req);
 }
 
@@ -1222,12 +1217,12 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	}
 
 	dev = ep->dev;
-	if (unlikely (!dev->driver
+	if (unlikely(!dev->driver
 			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
 		return -ESHUTDOWN;
 	}
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
 	if (unlikely(!_req || !_req->complete
 			|| !_req->buf || !list_empty(&req->queue))) {
@@ -1235,7 +1230,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 			dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__);
 		else {
 			dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n",
-				__func__, !_req->complete,!_req->buf,
+				__func__, !_req->complete, !_req->buf,
 				!list_empty(&req->queue));
 		}
 
@@ -1301,7 +1296,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	}
 
 	/* pio or dma irq handler advances the queue. */
-	if (likely (req != 0))
+	if (likely(req != 0))
 		list_add_tail(&req->queue, &ep->queue);
 
 	local_irq_restore(flags);
@@ -1331,11 +1326,11 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 	udc = to_s3c2410_udc(ep->gadget);
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
-	list_for_each_entry (req, &ep->queue, queue) {
+	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req) {
-			list_del_init (&req->queue);
+			list_del_init(&req->queue);
 			_req->status = -ECONNRESET;
 			retval = 0;
 			break;
@@ -1350,7 +1345,7 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 		s3c2410_udc_done(ep, req, -ECONNRESET);
 	}
 
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 	return retval;
 }
 
@@ -1369,7 +1364,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 		return -EINVAL;
 	}
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
 	idx = ep->bEndpointAddress & 0x7F;
 
@@ -1378,7 +1373,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 		s3c2410_udc_set_ep0_de_out(base_addr);
 	} else {
 		udc_write(idx, S3C2410_UDC_INDEX_REG);
-		ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN)
+		ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN)
 				? S3C2410_UDC_IN_CSR1_REG
 				: S3C2410_UDC_OUT_CSR1_REG);
 
@@ -1406,7 +1401,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 	}
 
 	ep->halted = value ? 1 : 0;
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 
 	return 0;
 }
@@ -1486,9 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
 			}
 			s3c2410_udc_disable(udc);
 		}
-	}
-	else
+	} else {
 		return -EOPNOTSUPP;
+	}
 
 	return 0;
 }
@@ -1619,20 +1614,20 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
 	u32 i;
 
 	/* device/ep0 records init */
-	INIT_LIST_HEAD (&dev->gadget.ep_list);
-	INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
 	dev->ep0state = EP0_IDLE;
 
 	for (i = 0; i < S3C2410_ENDPOINTS; i++) {
 		struct s3c2410_ep *ep = &dev->ep[i];
 
 		if (i != 0)
-			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
 
 		ep->dev = dev;
 		ep->ep.desc = NULL;
 		ep->halted = 0;
-		INIT_LIST_HEAD (&ep->queue);
+		INIT_LIST_HEAD(&ep->queue);
 	}
 }
 
@@ -1867,7 +1862,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE;
 	}
 
-	spin_lock_init (&udc->lock);
+	spin_lock_init(&udc->lock);
 	udc_info = pdev->dev.platform_data;
 
 	rsrc_start = S3C2410_PA_USBDEV;
@@ -2030,7 +2025,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
+static int
+s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
 {
 	s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
 
-- 
cgit v1.2.3


From 1660c8944652aac142e622d276c3750f735a568f Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Wed, 22 Aug 2012 15:49:01 +0530
Subject: usb: gadget: s3c2410_udc: Move assignment outside if condition

Fixes the following checkpatch errors:
ERROR: do not use assignment in if condition

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c2410_udc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d9e3a21b3ddc..e895ea12b67e 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1696,7 +1696,8 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 	udc->gadget.dev.driver = &driver->driver;
 
 	/* Bind the driver */
-	if ((retval = device_add(&udc->gadget.dev)) != 0) {
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
 		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
 		goto register_error;
 	}
@@ -1704,7 +1705,8 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 	dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n",
 		driver->driver.name);
 
-	if ((retval = bind(&udc->gadget)) != 0) {
+	retval = bind(&udc->gadget);
+	if (retval) {
 		device_del(&udc->gadget.dev);
 		goto register_error;
 	}
-- 
cgit v1.2.3


From 86bab36662d47388102ca437a3cbfd79e0ea75cd Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Wed, 22 Aug 2012 15:49:02 +0530
Subject: usb: gadget: s3c2410_udc: Do not use integer for NULL

'req' being a pointer shouldn't be equated with 0.

Fixes the following compilation warning:
drivers/usb/gadget/s3c2410_udc.c:1299:13: warning:
Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c2410_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e895ea12b67e..b627c9b51fda 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1296,7 +1296,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	}
 
 	/* pio or dma irq handler advances the queue. */
-	if (likely(req != 0))
+	if (likely(req))
 		list_add_tail(&req->queue, &ep->queue);
 
 	local_irq_restore(flags);
-- 
cgit v1.2.3


From 85b8614d722389202af298e1bf8a599c431fef19 Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz
Date: Fri, 24 Aug 2012 20:46:18 +0200
Subject: usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEED

This commit removes USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED
Kconfig options.  Since now kernel allows many UDC drivers to be
compiled, those options may turn to no longer be valid.  For
instance, if someone decides to build UDC that supports super
speed and UDC that supports high speed only, the latter will be
"assumed" to support super speed since USB_GADGET_SUPERSPEED will
be selected by the former.

The test of whether CONFIG_USB_GADGET_*SPEED was defined was just
an optimisation which removed otherwise dead code (ie. if UDC is
not dual speed, there is no need to handle cases that can happen
if speed is high).  This commit removes those checks.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/chipidea/Kconfig   |  1 -
 drivers/usb/dwc3/Kconfig       |  2 --
 drivers/usb/gadget/Kconfig     | 25 -------------------------
 drivers/usb/gadget/composite.c |  9 +--------
 drivers/usb/gadget/inode.c     | 15 ++++-----------
 drivers/usb/gadget/u_ether.c   |  7 -------
 drivers/usb/musb/Kconfig       |  1 -
 include/linux/usb/gadget.h     | 19 ++-----------------
 8 files changed, 7 insertions(+), 72 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 8337fb5d988d..272109ff5aa3 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -13,7 +13,6 @@ if USB_CHIPIDEA
 config USB_CHIPIDEA_UDC
 	bool "ChipIdea device controller"
 	depends on USB_GADGET
-	select USB_GADGET_DUALSPEED
 	help
 	  Say Y here to enable device controller functionality of the
 	  ChipIdea driver.
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index d13c60f42139..f6a6e070c2ac 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -2,8 +2,6 @@ config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB && USB_GADGET)
 	select USB_OTG_UTILS
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 51ab5fd5d468..2ba0d0e2eed6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -154,7 +154,6 @@ config USB_LPC32XX
 
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
-	select USB_GADGET_DUALSPEED
 	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
@@ -163,7 +162,6 @@ config USB_ATMEL_USBA
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
-	select USB_GADGET_DUALSPEED
 	select USB_FSL_MPH_DR_OF if OF
 	help
 	   Some of Freescale PowerPC and i.MX processors have a High Speed
@@ -179,7 +177,6 @@ config USB_FSL_USB2
 config USB_FUSB300
 	tristate "Faraday FUSB300 USB Peripheral Controller"
 	depends on !PHYS_ADDR_T_64BIT
-	select USB_GADGET_DUALSPEED
 	help
 	   Faraday usb device controller FUSB300 driver
 
@@ -227,7 +224,6 @@ config USB_PXA25X_SMALL
 
 config USB_R8A66597
 	tristate "Renesas R8A66597 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	   R8A66597 is a discrete USB host and peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -240,7 +236,6 @@ config USB_R8A66597
 config USB_RENESAS_USBHS_UDC
 	tristate 'Renesas USBHS controller'
 	depends on USB_RENESAS_USBHS
-	select USB_GADGET_DUALSPEED
 	help
 	   Renesas USBHS is a discrete USB host and peripheral controller chip
 	   that supports both full and high speed USB 2.0 data transfers.
@@ -268,7 +263,6 @@ config USB_PXA27X
 config USB_S3C_HSOTG
 	tristate "S3C HS/OtG USB Device controller"
 	depends on S3C_DEV_USB_HSOTG
-	select USB_GADGET_DUALSPEED
 	help
 	  The Samsung S3C64XX USB2.0 high-speed gadget controller
 	  integrated into the S3C64XX series SoC.
@@ -305,7 +299,6 @@ config USB_S3C2410_DEBUG
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
 	depends on ARCH_S3C24XX
-	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
 	  integrated with dual speed USB 2.0 device controller. It has
@@ -315,7 +308,6 @@ config USB_S3C_HSUDC
 
 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
@@ -338,14 +330,12 @@ config USB_MV_U3D
 config USB_GADGET_MUSB_HDRC
 	tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
 	depends on USB_MUSB_HDRC
-	select USB_GADGET_DUALSPEED
 	help
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
 config USB_M66592
 	tristate "Renesas M66592 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	   M66592 is a discrete USB peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -362,7 +352,6 @@ config USB_M66592
 config USB_AMD5536UDC
 	tristate "AMD5536 UDC"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
@@ -389,7 +378,6 @@ config USB_FSL_QE
 
 config USB_NET2272
 	tristate "PLX NET2272"
-	select USB_GADGET_DUALSPEED
 	help
 	  PLX NET2272 is a USB peripheral controller which supports
 	  both full and high speed USB 2.0 data transfers.
@@ -413,7 +401,6 @@ config USB_NET2272_DMA
 config USB_NET2280
 	tristate "NetChip 228x"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 	   supports both full and high speed USB 2.0 data transfers.
@@ -443,7 +430,6 @@ config USB_GOKU
 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	  This is a USB device driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's
@@ -470,8 +456,6 @@ config USB_EG20T
 config USB_DUMMY_HCD
 	tristate "Dummy HCD (DEVELOPMENT)"
 	depends on USB=y || (USB=m && USB_GADGET=m)
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
 	help
 	  This host controller driver emulates USB, looping all data transfer
 	  requests back to a USB "gadget driver" in the same host.  The host
@@ -496,15 +480,6 @@ config USB_DUMMY_HCD
 
 endmenu
 
-# Selected by UDC drivers that support high-speed operation.
-config USB_GADGET_DUALSPEED
-	bool
-
-# Selected by UDC drivers that support super-speed opperation
-config USB_GADGET_SUPERSPEED
-	bool
-	depends on USB_GADGET_DUALSPEED
-
 #
 # USB Gadget Drivers
 #
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 2cb1030203b5..91411a6d741b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1586,12 +1586,6 @@ composite_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver composite_driver = {
-#ifdef CONFIG_USB_GADGET_SUPERSPEED
-	.max_speed	= USB_SPEED_SUPER,
-#else
-	.max_speed	= USB_SPEED_HIGH,
-#endif
-
 	.unbind		= composite_unbind,
 
 	.setup		= composite_setup,
@@ -1636,8 +1630,7 @@ int usb_composite_probe(struct usb_composite_driver *driver,
 		driver->iProduct = driver->name;
 	composite_driver.function =  (char *) driver->name;
 	composite_driver.driver.name = driver->name;
-	composite_driver.max_speed =
-		min_t(u8, composite_driver.max_speed, driver->max_speed);
+	composite_driver.max_speed = driver->max_speed;
 	composite = driver;
 	composite_gadget_bind = bind;
 
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index e58b16442971..ae13a106fb96 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -828,7 +828,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	case USB_SPEED_HIGH:
 		/* fails if caller didn't provide that descriptor... */
 		ep->desc = &data->hs_desc;
@@ -836,7 +835,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#endif
 	default:
 		DBG(data->dev, "unconnected, %s init abandoned\n",
 				data->name);
@@ -1324,7 +1322,6 @@ static const struct file_operations ep0_io_operations = {
  * Unrecognized ep0 requests may be handled in user space.
  */
 
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 static void make_qualifier (struct dev_data *dev)
 {
 	struct usb_qualifier_descriptor		qual;
@@ -1347,7 +1344,6 @@ static void make_qualifier (struct dev_data *dev)
 
 	memcpy (dev->rbuf, &qual, sizeof qual);
 }
-#endif
 
 static int
 config_buf (struct dev_data *dev, u8 type, unsigned index)
@@ -1427,7 +1423,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
 			req->buf = dev->dev;
 			break;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		case USB_DT_DEVICE_QUALIFIER:
 			if (!dev->hs_config)
 				break;
@@ -1437,7 +1432,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			break;
 		case USB_DT_OTHER_SPEED_CONFIG:
 			// FALLTHROUGH
-#endif
 		case USB_DT_CONFIG:
 			value = config_buf (dev,
 					w_value >> 8,
@@ -1763,11 +1757,6 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 }
 
 static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-	.max_speed	= USB_SPEED_HIGH,
-#else
-	.max_speed	= USB_SPEED_FULL,
-#endif
 	.function	= (char *) driver_desc,
 	.unbind		= gadgetfs_unbind,
 	.setup		= gadgetfs_setup,
@@ -1900,6 +1889,10 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	/* triggers gadgetfs_bind(); then we can enumerate. */
 	spin_unlock_irq (&dev->lock);
+	if (dev->hs_config)
+		gadgetfs_driver.max_speed = USB_SPEED_HIGH;
+	else
+		gadgetfs_driver.max_speed = USB_SPEED_FULL;
 	value = usb_gadget_probe_driver(&gadgetfs_driver, gadgetfs_bind);
 	if (value != 0) {
 		kfree (dev->buf);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 90e82e288eb9..1154a99dc8db 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -83,17 +83,10 @@ struct eth_dev {
 
 #define DEFAULT_QLEN	2	/* double buffering by default */
 
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
 static unsigned qmult = 5;
 module_param(qmult, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
 
-#else	/* full speed (low speed doesn't do bulk) */
-#define qmult		1
-#endif
-
 /* for dual-speed hardware, use deeper queues at high/super speed */
 static inline int qlen(struct usb_gadget *gadget)
 {
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index ef0c3f9f0947..1b9f005ae9a5 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,7 +12,6 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
-	select USB_GADGET_DUALSPEED
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 9517466ababb..d05b220f0fd3 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -558,14 +558,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
  */
 static inline int gadget_is_dualspeed(struct usb_gadget *g)
 {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	/* runtime test would check "g->max_speed" ... that might be
-	 * useful to work around hardware bugs, but is mostly pointless
-	 */
-	return 1;
-#else
-	return 0;
-#endif
+	return g->max_speed >= USB_SPEED_HIGH;
 }
 
 /**
@@ -575,15 +568,7 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
  */
 static inline int gadget_is_superspeed(struct usb_gadget *g)
 {
-#ifdef CONFIG_USB_GADGET_SUPERSPEED
-	/*
-	 * runtime test would check "g->max_speed" ... that might be
-	 * useful to work around hardware bugs, but is mostly pointless
-	 */
-	return 1;
-#else
-	return 0;
-#endif
+	return g->max_speed >= USB_SPEED_SUPER;
 }
 
 /**
-- 
cgit v1.2.3


From 44fd6c0266d3ec752be1bf003015544ea45f473f Mon Sep 17 00:00:00 2001
From: Julia Lawall
Date: Sat, 25 Aug 2012 21:57:06 +0200
Subject: usb: gadget: lpc32xx_udc.c: adjust inconsistent IS_ERR and PTR_ERR

Change the call to PTR_ERR to access the value just tested by IS_ERR.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
@@

(
if (IS_ERR(e)) { ... PTR_ERR(e) ... }
|
if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... }
|
*if (IS_ERR(e))
 { ...
*  PTR_ERR(e1)
   ... }
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/lpc32xx_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index a0195f20bf3b..f696fb9b136d 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -3176,7 +3176,7 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
 	if (IS_ERR(udc->usb_otg_clk)) {
 		dev_err(udc->dev, "failed to acquire USB otg clock\n");
-		retval = PTR_ERR(udc->usb_slv_clk);
+		retval = PTR_ERR(udc->usb_otg_clk);
 		goto usb_otg_clk_get_fail;
 	}
 
-- 
cgit v1.2.3


From 9d2333d0d9bc03da3d8c11f92c602dac97ffea1e Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Sun, 26 Aug 2012 09:43:00 +0800
Subject: usb: gadget: remove duplicated include from pxa25x_udc.c

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/pxa25x_udc.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 907ad3ecb341..c246c08a242d 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -33,7 +33,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
-#include <linux/err.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
-- 
cgit v1.2.3


From 78f0c53ef8563009bf089ef90c7204f526d4a589 Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Mon, 3 Sep 2012 15:48:18 +0530
Subject: usb: gadget: s3c-hsudc: Use devm_* functions

devm_* functions are used to replace kzalloc, request_mem_region, ioremap
clk_get and request_irq functions in probe call. With the usage of devm_*
functions explicit freeing and unmapping is not required.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsudc.c | 41 +++++++++--------------------------------
 1 file changed, 9 insertions(+), 32 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index e26a4e7ed2bf..fe4a46197181 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -135,7 +135,6 @@ struct s3c_hsudc_req {
  * @dev: The device reference used by probe function.
  * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed).
  * @regs: Remapped base address of controller's register space.
- * @mem_rsrc: Device memory resource used for remapping device register space.
  * irq: IRQ number used by the controller.
  * uclk: Reference to the controller clock.
  * ep0state: Current state of EP0.
@@ -150,7 +149,6 @@ struct s3c_hsudc {
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
 	spinlock_t lock;
 	void __iomem *regs;
-	struct resource *mem_rsrc;
 	int irq;
 	struct clk *uclk;
 	int ep0state;
@@ -1271,7 +1269,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
 	int ret, i;
 
-	hsudc = kzalloc(sizeof(struct s3c_hsudc) +
+	hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) +
 			sizeof(struct s3c_hsudc_ep) * pd->epnum,
 			GFP_KERNEL);
 	if (!hsudc) {
@@ -1296,25 +1294,12 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "unable to obtain driver resource data\n");
-		ret = -ENODEV;
-		goto err_res;
-	}
-
-	hsudc->mem_rsrc = request_mem_region(res->start, resource_size(res),
-				dev_name(&pdev->dev));
-	if (!hsudc->mem_rsrc) {
-		dev_err(dev, "failed to reserve register area\n");
-		ret = -ENODEV;
-		goto err_res;
-	}
 
-	hsudc->regs = ioremap(res->start, resource_size(res));
+	hsudc->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!hsudc->regs) {
 		dev_err(dev, "error mapping device register area\n");
 		ret = -EBUSY;
-		goto err_remap;
+		goto err_res;
 	}
 
 	spin_lock_init(&hsudc->lock);
@@ -1337,21 +1322,22 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		dev_err(dev, "unable to obtain IRQ number\n");
-		goto err_irq;
+		goto err_res;
 	}
 	hsudc->irq = ret;
 
-	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
+	ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0,
+				driver_name, hsudc);
 	if (ret < 0) {
 		dev_err(dev, "irq request failed\n");
-		goto err_irq;
+		goto err_res;
 	}
 
-	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
+	hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
 		ret = PTR_ERR(hsudc->uclk);
-		goto err_clk;
+		goto err_res;
 	}
 	clk_enable(hsudc->uclk);
 
@@ -1377,21 +1363,12 @@ err_add_udc:
 	device_unregister(&hsudc->gadget.dev);
 err_add_device:
 	clk_disable(hsudc->uclk);
-	clk_put(hsudc->uclk);
-err_clk:
-	free_irq(hsudc->irq, hsudc);
-err_irq:
-	iounmap(hsudc->regs);
-
-err_remap:
-	release_mem_region(res->start, resource_size(res));
 err_res:
 	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		usb_put_phy(hsudc->transceiver);
 
 	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:
-	kfree(hsudc);
 	return ret;
 }
 
-- 
cgit v1.2.3


From affaab4c58d8e5f7c30ca2be351277cf72d2336f Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Mon, 3 Sep 2012 15:48:19 +0530
Subject: usb: gadget: s3c-hsudc: Add missing braces around sizeof

Silences the following checkpatch warning:
WARNING: sizeof *hsreq should be sizeof(*hsreq)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsudc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index fe4a46197181..35cdc6a5a589 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -833,7 +833,7 @@ static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
 {
 	struct s3c_hsudc_req *hsreq;
 
-	hsreq = kzalloc(sizeof *hsreq, gfp_flags);
+	hsreq = kzalloc(sizeof(*hsreq), gfp_flags);
 	if (!hsreq)
 		return 0;
 
-- 
cgit v1.2.3


From dc2cdcaf4caafeb069d01704fdfda24f9c1f443a Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Mon, 3 Sep 2012 15:48:20 +0530
Subject: usb: gadget: s3c-hsudc: Replace 0 with NULL for pointers

Silences the following type of sparse warnings:
warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsudc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 35cdc6a5a589..d8e785d4ad59 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -835,7 +835,7 @@ static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
 
 	hsreq = kzalloc(sizeof(*hsreq), gfp_flags);
 	if (!hsreq)
-		return 0;
+		return NULL;
 
 	INIT_LIST_HEAD(&hsreq->queue);
 	return &hsreq->req;
@@ -904,16 +904,16 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
 			csr = readl((u32)hsudc->regs + offset);
 			if (!(csr & S3C_ESR_TX_SUCCESS) &&
 				(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
-				hsreq = 0;
+				hsreq = NULL;
 		} else {
 			csr = readl((u32)hsudc->regs + offset);
 			if ((csr & S3C_ESR_RX_SUCCESS)
 				   && (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
-				hsreq = 0;
+				hsreq = NULL;
 		}
 	}
 
-	if (hsreq != 0)
+	if (hsreq)
 		list_add_tail(&hsreq->queue, &hsep->queue);
 
 	spin_unlock_irqrestore(&hsudc->lock, flags);
-- 
cgit v1.2.3


From 84749c6dcb694a7aa793221ea8cc3d70bd46d466 Mon Sep 17 00:00:00 2001
From: Sachin Kamat
Date: Mon, 3 Sep 2012 16:15:18 +0530
Subject: usb: gadget: s3c-hsotg: Use devm_clk_get function

devm_* functions are already used in this file. Hence
convert clk_get to devm_clk_get for completeness.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/s3c-hsotg.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a826cb98d306..5b90a3c159e6 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3516,7 +3516,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	hsotg->dev = dev;
 	hsotg->plat = plat;
 
-	hsotg->clk = clk_get(&pdev->dev, "otg");
+	hsotg->clk = devm_clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
 		dev_err(dev, "cannot get otg clock\n");
 		return PTR_ERR(hsotg->clk);
@@ -3664,7 +3664,6 @@ err_supplies:
 
 err_clk:
 	clk_disable_unprepare(hsotg->clk);
-	clk_put(hsotg->clk);
 
 	return ret;
 }
@@ -3690,7 +3689,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
 	clk_disable_unprepare(hsotg->clk);
-	clk_put(hsotg->clk);
 
 	device_unregister(&hsotg->gadget.dev);
 	return 0;
-- 
cgit v1.2.3


From 613065e53cb191d00d9d4fc377398b656ed05a45 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee
Date: Sat, 25 Aug 2012 12:38:52 -0700
Subject: usb: gadget: bcm63xx UDC driver

Driver for the "USB20D" / "USBD" block on BCM6328, BCM6368, BCM6816,
BCM6362, BCM3383, and others.

The hardware block was designed to support networking applications
(direct connection of a home router to a PC), and the endpoint
configuration is fixed.

[ balbi@ti.com : dropped USB_GADGET_DUALSPEED from Kconfig ]

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Kconfig        |   11 +
 drivers/usb/gadget/Makefile       |    1 +
 drivers/usb/gadget/bcm63xx_udc.c  | 2464 +++++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/gadget_chips.h |    3 +
 4 files changed, 2479 insertions(+)
 create mode 100644 drivers/usb/gadget/bcm63xx_udc.c

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 2ba0d0e2eed6..75b76d5a0fe9 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -159,6 +159,17 @@ config USB_ATMEL_USBA
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
 
+config USB_BCM63XX_UDC
+	tristate "Broadcom BCM63xx Peripheral Controller"
+	depends on BCM63XX
+	help
+	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
+	   high speed USB Device Port with support for four fixed endpoints
+	   (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "bcm63xx_udc".
+
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 3fd8cd09d2c1..d84f92325a74 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-y			:= fsl_udc_core.o
 fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
new file mode 100644
index 000000000000..9ca792224cd4
--- /dev/null
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -0,0 +1,2464 @@
+/*
+ * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ * Copyright (C) 2012 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_iudma.h>
+#include <bcm63xx_dev_usb_usbd.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+#define DRV_MODULE_NAME		"bcm63xx_udc"
+
+static const char bcm63xx_ep0name[] = "ep0";
+static const char *const bcm63xx_ep_name[] = {
+	bcm63xx_ep0name,
+	"ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int",
+};
+
+static bool use_fullspeed;
+module_param(use_fullspeed, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
+
+/*
+ * RX IRQ coalescing options:
+ *
+ * false (default) - one IRQ per DATAx packet.  Slow but reliable.  The
+ * driver is able to pass the "testusb" suite and recover from conditions like:
+ *
+ *   1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep
+ *   2) Host sends 512 bytes of data
+ *   3) Host decides to reconfigure the device and sends SET_INTERFACE
+ *   4) Device shuts down the endpoint and cancels the RX transaction
+ *
+ * true - one IRQ per transfer, for transfers <= 2048B.  Generates
+ * considerably fewer IRQs, but error recovery is less robust.  Does not
+ * reliably pass "testusb".
+ *
+ * TX always uses coalescing, because we can cancel partially complete TX
+ * transfers by repeatedly flushing the FIFO.  The hardware doesn't allow
+ * this on RX.
+ */
+static bool irq_coalesce;
+module_param(irq_coalesce, bool, S_IRUGO);
+MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer");
+
+#define BCM63XX_NUM_EP			5
+#define BCM63XX_NUM_IUDMA		6
+#define BCM63XX_NUM_FIFO_PAIRS		3
+
+#define IUDMA_RESET_TIMEOUT_US		10000
+
+#define IUDMA_EP0_RXCHAN		0
+#define IUDMA_EP0_TXCHAN		1
+
+#define IUDMA_MAX_FRAGMENT		2048
+#define BCM63XX_MAX_CTRL_PKT		64
+
+#define BCMEP_CTRL			0x00
+#define BCMEP_ISOC			0x01
+#define BCMEP_BULK			0x02
+#define BCMEP_INTR			0x03
+
+#define BCMEP_OUT			0x00
+#define BCMEP_IN			0x01
+
+#define BCM63XX_SPD_FULL		1
+#define BCM63XX_SPD_HIGH		0
+
+#define IUDMA_DMAC_OFFSET		0x200
+#define IUDMA_DMAS_OFFSET		0x400
+
+enum bcm63xx_ep0_state {
+	EP0_REQUEUE,
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE_SETUP,
+	EP0_IN_DATA_PHASE_COMPLETE,
+	EP0_OUT_DATA_PHASE_SETUP,
+	EP0_OUT_DATA_PHASE_COMPLETE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_IN_FAKE_STATUS_PHASE,
+	EP0_SHUTDOWN,
+};
+
+static const char __maybe_unused bcm63xx_ep0_state_names[][32] = {
+	"REQUEUE",
+	"IDLE",
+	"IN_DATA_PHASE_SETUP",
+	"IN_DATA_PHASE_COMPLETE",
+	"OUT_DATA_PHASE_SETUP",
+	"OUT_DATA_PHASE_COMPLETE",
+	"OUT_STATUS_PHASE",
+	"IN_FAKE_STATUS_PHASE",
+	"SHUTDOWN",
+};
+
+/**
+ * struct iudma_ch_cfg - Static configuration for an IUDMA channel.
+ * @ep_num: USB endpoint number.
+ * @n_bds: Number of buffer descriptors in the ring.
+ * @ep_type: Endpoint type (control, bulk, interrupt).
+ * @dir: Direction (in, out).
+ * @n_fifo_slots: Number of FIFO entries to allocate for this channel.
+ * @max_pkt_hs: Maximum packet size in high speed mode.
+ * @max_pkt_fs: Maximum packet size in full speed mode.
+ */
+struct iudma_ch_cfg {
+	int				ep_num;
+	int				n_bds;
+	int				ep_type;
+	int				dir;
+	int				n_fifo_slots;
+	int				max_pkt_hs;
+	int				max_pkt_fs;
+};
+
+static const struct iudma_ch_cfg iudma_defaults[] = {
+
+	/* This controller was designed to support a CDC/RNDIS application.
+	   It may be possible to reconfigure some of the endpoints, but
+	   the hardware limitations (FIFO sizing and number of DMA channels)
+	   may significantly impact flexibility and/or stability.  Change
+	   these values at your own risk.
+
+	      ep_num       ep_type           n_fifo_slots    max_pkt_fs
+	idx      |  n_bds     |         dir       |  max_pkt_hs  |
+	 |       |    |       |          |        |      |       |       */
+	[0] = { -1,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[1] = {  0,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[2] = {  2,  16, BCMEP_BULK, BCMEP_OUT, 128,   512,     64 },
+	[3] = {  1,  16, BCMEP_BULK, BCMEP_IN,  128,   512,     64 },
+	[4] = {  4,   4, BCMEP_INTR, BCMEP_OUT,  32,    64,     64 },
+	[5] = {  3,   4, BCMEP_INTR, BCMEP_IN,   32,    64,     64 },
+};
+
+struct bcm63xx_udc;
+
+/**
+ * struct iudma_ch - Represents the current state of a single IUDMA channel.
+ * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1).
+ * @ep_num: USB endpoint number.  -1 for ep0 RX.
+ * @enabled: Whether bcm63xx_ep_enable() has been called.
+ * @max_pkt: "Chunk size" on the USB interface.  Based on interface speed.
+ * @is_tx: true for TX, false for RX.
+ * @bep: Pointer to the associated endpoint.  NULL for ep0 RX.
+ * @udc: Reference to the device controller.
+ * @read_bd: Next buffer descriptor to reap from the hardware.
+ * @write_bd: Next BD available for a new packet.
+ * @end_bd: Points to the final BD in the ring.
+ * @n_bds_used: Number of BD entries currently occupied.
+ * @bd_ring: Base pointer to the BD ring.
+ * @bd_ring_dma: Physical (DMA) address of bd_ring.
+ * @n_bds: Total number of BDs in the ring.
+ *
+ * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is
+ * bidirectional.  The "struct usb_ep" associated with ep0 is for TX (IN)
+ * only.
+ *
+ * Each bulk/intr endpoint has a single IUDMA channel and a single
+ * struct usb_ep.
+ */
+struct iudma_ch {
+	unsigned int			ch_idx;
+	int				ep_num;
+	bool				enabled;
+	int				max_pkt;
+	bool				is_tx;
+	struct bcm63xx_ep		*bep;
+	struct bcm63xx_udc		*udc;
+
+	struct bcm_enet_desc		*read_bd;
+	struct bcm_enet_desc		*write_bd;
+	struct bcm_enet_desc		*end_bd;
+	int				n_bds_used;
+
+	struct bcm_enet_desc		*bd_ring;
+	dma_addr_t			bd_ring_dma;
+	unsigned int			n_bds;
+};
+
+/**
+ * struct bcm63xx_ep - Internal (driver) state of a single endpoint.
+ * @ep_num: USB endpoint number.
+ * @iudma: Pointer to IUDMA channel state.
+ * @ep: USB gadget layer representation of the EP.
+ * @udc: Reference to the device controller.
+ * @queue: Linked list of outstanding requests for this EP.
+ * @halted: 1 if the EP is stalled; 0 otherwise.
+ */
+struct bcm63xx_ep {
+	unsigned int			ep_num;
+	struct iudma_ch			*iudma;
+	struct usb_ep			ep;
+	struct bcm63xx_udc		*udc;
+	struct list_head		queue;
+	unsigned			halted:1;
+};
+
+/**
+ * struct bcm63xx_req - Internal (driver) state of a single request.
+ * @queue: Links back to the EP's request list.
+ * @req: USB gadget layer representation of the request.
+ * @offset: Current byte offset into the data buffer (next byte to queue).
+ * @bd_bytes: Number of data bytes in outstanding BD entries.
+ * @iudma: IUDMA channel used for the request.
+ */
+struct bcm63xx_req {
+	struct list_head		queue;		/* ep's requests */
+	struct usb_request		req;
+	unsigned int			offset;
+	unsigned int			bd_bytes;
+	struct iudma_ch			*iudma;
+};
+
+/**
+ * struct bcm63xx_udc - Driver/hardware private context.
+ * @lock: Spinlock to mediate access to this struct, and (most) HW regs.
+ * @dev: Generic Linux device structure.
+ * @pd: Platform data (board/port info).
+ * @usbd_clk: Clock descriptor for the USB device block.
+ * @usbh_clk: Clock descriptor for the USB host block.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ * @usbd_regs: Base address of the USBD/USB20D block.
+ * @iudma_regs: Base address of the USBD's associated IUDMA block.
+ * @bep: Array of endpoints, including ep0.
+ * @iudma: Array of all IUDMA channels used by this controller.
+ * @cfg: USB configuration number, from SET_CONFIGURATION wValue.
+ * @iface: USB interface number, from SET_INTERFACE wIndex.
+ * @alt_iface: USB alt interface number, from SET_INTERFACE wValue.
+ * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions.
+ * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req.
+ * @ep0state: Current state of the ep0 state machine.
+ * @ep0_wq: Workqueue struct used to wake up the ep0 state machine.
+ * @wedgemap: Bitmap of wedged endpoints.
+ * @ep0_req_reset: USB reset is pending.
+ * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet.
+ * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet.
+ * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity.
+ * @ep0_req_completed: ep0 request has completed; worker has not seen it yet.
+ * @ep0_reply: Pending reply from gadget driver.
+ * @ep0_request: Outstanding ep0 request.
+ * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>.
+ * @debugfs_usbd: debugfs file "usbd" for controller state.
+ * @debugfs_iudma: debugfs file "usbd" for IUDMA state.
+ */
+struct bcm63xx_udc {
+	spinlock_t			lock;
+
+	struct device			*dev;
+	struct bcm63xx_usbd_platform_data *pd;
+	struct clk			*usbd_clk;
+	struct clk			*usbh_clk;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	void __iomem			*usbd_regs;
+	void __iomem			*iudma_regs;
+
+	struct bcm63xx_ep		bep[BCM63XX_NUM_EP];
+	struct iudma_ch			iudma[BCM63XX_NUM_IUDMA];
+
+	int				cfg;
+	int				iface;
+	int				alt_iface;
+
+	struct bcm63xx_req		ep0_ctrl_req;
+	u8				*ep0_ctrl_buf;
+
+	int				ep0state;
+	struct work_struct		ep0_wq;
+
+	unsigned long			wedgemap;
+
+	unsigned			ep0_req_reset:1;
+	unsigned			ep0_req_set_cfg:1;
+	unsigned			ep0_req_set_iface:1;
+	unsigned			ep0_req_shutdown:1;
+
+	unsigned			ep0_req_completed:1;
+	struct usb_request		*ep0_reply;
+	struct usb_request		*ep0_request;
+
+	struct dentry			*debugfs_root;
+	struct dentry			*debugfs_usbd;
+	struct dentry			*debugfs_iudma;
+};
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops;
+
+/***********************************************************************
+ * Convenience functions
+ ***********************************************************************/
+
+static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct bcm63xx_udc, gadget);
+}
+
+static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct bcm63xx_ep, ep);
+}
+
+static inline struct bcm63xx_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct bcm63xx_req, req);
+}
+
+static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->usbd_regs + off);
+}
+
+static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->usbd_regs + off);
+}
+
+static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + off);
+}
+
+static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + off);
+}
+
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+}
+
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+}
+
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+}
+
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+}
+
+static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
+{
+	if (is_enabled) {
+		clk_enable(udc->usbh_clk);
+		clk_enable(udc->usbd_clk);
+		udelay(10);
+	} else {
+		clk_disable(udc->usbd_clk);
+		clk_disable(udc->usbh_clk);
+	}
+}
+
+/***********************************************************************
+ * Low-level IUDMA / FIFO operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal.
+ * @udc: Reference to the device controller.
+ * @idx: Desired init_sel value.
+ *
+ * The "init_sel" signal is used as a selection index for both endpoints
+ * and IUDMA channels.  Since these do not map 1:1, the use of this signal
+ * depends on the context.
+ */
+static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx)
+{
+	u32 val = usbd_readl(udc, USBD_CONTROL_REG);
+
+	val &= ~USBD_CONTROL_INIT_SEL_MASK;
+	val |= idx << USBD_CONTROL_INIT_SEL_SHIFT;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_set_stall - Enable/disable stall on one endpoint.
+ * @udc: Reference to the device controller.
+ * @bep: Endpoint on which to operate.
+ * @is_stalled: true to enable stall, false to disable.
+ *
+ * See notes in bcm63xx_update_wedge() regarding automatic clearing of
+ * halt/stall conditions.
+ */
+static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep,
+	bool is_stalled)
+{
+	u32 val;
+
+	val = USBD_STALL_UPDATE_MASK |
+		(is_stalled ? USBD_STALL_ENABLE_MASK : 0) |
+		(bep->ep_num << USBD_STALL_EPNUM_SHIFT);
+	usbd_writel(udc, val, USBD_STALL_REG);
+}
+
+/**
+ * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings.
+ * @udc: Reference to the device controller.
+ *
+ * These parameters depend on the USB link speed.  Settings are
+ * per-IUDMA-channel-pair.
+ */
+static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc)
+{
+	int is_hs = udc->gadget.speed == USB_SPEED_HIGH;
+	u32 i, val, rx_fifo_slot, tx_fifo_slot;
+
+	/* set up FIFO boundaries and packet sizes; this is done in pairs */
+	rx_fifo_slot = tx_fifo_slot = 0;
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) {
+		const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i];
+		const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1];
+
+		bcm63xx_ep_dma_select(udc, i >> 1);
+
+		val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) |
+			((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) <<
+			 USBD_RXFIFO_CONFIG_END_SHIFT);
+		rx_fifo_slot += rx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs,
+			    USBD_RXFIFO_EPSIZE_REG);
+
+		val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) |
+			((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) <<
+			 USBD_TXFIFO_CONFIG_END_SHIFT);
+		tx_fifo_slot += tx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs,
+			    USBD_TXFIFO_EPSIZE_REG);
+
+		usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG);
+	}
+}
+
+/**
+ * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO.
+ * @udc: Reference to the device controller.
+ * @ep_num: Endpoint number.
+ */
+static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num)
+{
+	u32 val;
+
+	bcm63xx_ep_dma_select(udc, ep_num);
+
+	val = usbd_readl(udc, USBD_CONTROL_REG);
+	val |= USBD_CONTROL_FIFO_RESET_MASK;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+	usbd_readl(udc, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_fifo_reset - Flush all hardware FIFOs.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++)
+		bcm63xx_fifo_reset_ep(udc, i);
+}
+
+/**
+ * bcm63xx_ep_init - Initial (one-time) endpoint initialization.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_ep_init(struct bcm63xx_udc *udc)
+{
+	u32 i, val;
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+
+		if (cfg->ep_num < 0)
+			continue;
+
+		bcm63xx_ep_dma_select(udc, cfg->ep_num);
+		val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) |
+			((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT);
+		usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG);
+	}
+}
+
+/**
+ * bcm63xx_ep_setup - Configure per-endpoint settings.
+ * @udc: Reference to the device controller.
+ *
+ * This needs to be rerun if the speed/cfg/intf/altintf changes.
+ */
+static void bcm63xx_ep_setup(struct bcm63xx_udc *udc)
+{
+	u32 val, i;
+
+	usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+		int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ?
+			      cfg->max_pkt_hs : cfg->max_pkt_fs;
+		int idx = cfg->ep_num;
+
+		udc->iudma[i].max_pkt = max_pkt;
+
+		if (idx < 0)
+			continue;
+		udc->bep[idx].ep.maxpacket = max_pkt;
+
+		val = (idx << USBD_CSR_EP_LOG_SHIFT) |
+		      (cfg->dir << USBD_CSR_EP_DIR_SHIFT) |
+		      (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) |
+		      (udc->cfg << USBD_CSR_EP_CFG_SHIFT) |
+		      (udc->iface << USBD_CSR_EP_IFACE_SHIFT) |
+		      (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) |
+		      (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT);
+		usbd_writel(udc, val, USBD_CSR_EP_REG(idx));
+	}
+}
+
+/**
+ * iudma_write - Queue a single IUDMA transaction.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ * @breq: Request containing the transaction data.
+ *
+ * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA
+ * does not honor SOP/EOP so the handling of multiple buffers is ambiguous.
+ * So iudma_write() may be called several times to fulfill a single
+ * usb_request.
+ *
+ * For TX IUDMA, this can queue multiple buffer descriptors if needed.
+ */
+static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
+	struct bcm63xx_req *breq)
+{
+	int first_bd = 1, last_bd = 0, extra_zero_pkt = 0;
+	unsigned int bytes_left = breq->req.length - breq->offset;
+	const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ?
+		iudma->max_pkt : IUDMA_MAX_FRAGMENT;
+
+	iudma->n_bds_used = 0;
+	breq->bd_bytes = 0;
+	breq->iudma = iudma;
+
+	if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero)
+		extra_zero_pkt = 1;
+
+	do {
+		struct bcm_enet_desc *d = iudma->write_bd;
+		u32 dmaflags = 0;
+		unsigned int n_bytes;
+
+		if (d == iudma->end_bd) {
+			dmaflags |= DMADESC_WRAP_MASK;
+			iudma->write_bd = iudma->bd_ring;
+		} else {
+			iudma->write_bd++;
+		}
+		iudma->n_bds_used++;
+
+		n_bytes = min_t(int, bytes_left, max_bd_bytes);
+		if (n_bytes)
+			dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT;
+		else
+			dmaflags |= (1 << DMADESC_LENGTH_SHIFT) |
+				    DMADESC_USB_ZERO_MASK;
+
+		dmaflags |= DMADESC_OWNER_MASK;
+		if (first_bd) {
+			dmaflags |= DMADESC_SOP_MASK;
+			first_bd = 0;
+		}
+
+		/*
+		 * extra_zero_pkt forces one more iteration through the loop
+		 * after all data is queued up, to send the zero packet
+		 */
+		if (extra_zero_pkt && !bytes_left)
+			extra_zero_pkt = 0;
+
+		if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds ||
+		    (n_bytes == bytes_left && !extra_zero_pkt)) {
+			last_bd = 1;
+			dmaflags |= DMADESC_EOP_MASK;
+		}
+
+		d->address = breq->req.dma + breq->offset;
+		mb();
+		d->len_stat = dmaflags;
+
+		breq->offset += n_bytes;
+		breq->bd_bytes += n_bytes;
+		bytes_left -= n_bytes;
+	} while (!last_bd);
+
+	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
+			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+}
+
+/**
+ * iudma_read - Check for IUDMA buffer completion.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ *
+ * This checks to see if ALL of the outstanding BDs on the DMA channel
+ * have been filled.  If so, it returns the actual transfer length;
+ * otherwise it returns -EBUSY.
+ */
+static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int i, actual_len = 0;
+	struct bcm_enet_desc *d = iudma->read_bd;
+
+	if (!iudma->n_bds_used)
+		return -EINVAL;
+
+	for (i = 0; i < iudma->n_bds_used; i++) {
+		u32 dmaflags;
+
+		dmaflags = d->len_stat;
+
+		if (dmaflags & DMADESC_OWNER_MASK)
+			return -EBUSY;
+
+		actual_len += (dmaflags & DMADESC_LENGTH_MASK) >>
+			      DMADESC_LENGTH_SHIFT;
+		if (d == iudma->end_bd)
+			d = iudma->bd_ring;
+		else
+			d++;
+	}
+
+	iudma->read_bd = d;
+	iudma->n_bds_used = 0;
+	return actual_len;
+}
+
+/**
+ * iudma_reset_channel - Stop DMA on a single channel.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to reset.
+ */
+static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int timeout = IUDMA_RESET_TIMEOUT_US;
+	struct bcm_enet_desc *d;
+	int ch_idx = iudma->ch_idx;
+
+	if (!iudma->is_tx)
+		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
+
+	/* stop DMA, then wait for the hardware to wrap up */
+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+
+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+				   ENETDMAC_CHANCFG_EN_MASK) {
+		udelay(1);
+
+		/* repeatedly flush the FIFO data until the BD completes */
+		if (iudma->is_tx && iudma->ep_num >= 0)
+			bcm63xx_fifo_reset_ep(udc, iudma->ep_num);
+
+		if (!timeout--) {
+			dev_err(udc->dev, "can't reset IUDMA channel %d\n",
+				ch_idx);
+			break;
+		}
+		if (timeout == IUDMA_RESET_TIMEOUT_US / 2) {
+			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
+				 ch_idx);
+			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
+					ENETDMAC_CHANCFG_REG(ch_idx));
+		}
+	}
+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+
+	/* don't leave "live" HW-owned entries for the next guy to step on */
+	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
+		d->len_stat = 0;
+	mb();
+
+	iudma->read_bd = iudma->write_bd = iudma->bd_ring;
+	iudma->n_bds_used = 0;
+
+	/* set up IRQs, UBUS burst size, and BD base for this channel */
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IRMASK_REG(ch_idx));
+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+
+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+}
+
+/**
+ * iudma_init_channel - One-time IUDMA channel initialization.
+ * @udc: Reference to the device controller.
+ * @ch_idx: Channel to initialize.
+ */
+static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx)
+{
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+	const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx];
+	unsigned int n_bds = cfg->n_bds;
+	struct bcm63xx_ep *bep = NULL;
+
+	iudma->ep_num = cfg->ep_num;
+	iudma->ch_idx = ch_idx;
+	iudma->is_tx = !!(ch_idx & 0x01);
+	if (iudma->ep_num >= 0) {
+		bep = &udc->bep[iudma->ep_num];
+		bep->iudma = iudma;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	iudma->bep = bep;
+	iudma->udc = udc;
+
+	/* ep0 is always active; others are controlled by the gadget driver */
+	if (iudma->ep_num <= 0)
+		iudma->enabled = true;
+
+	iudma->n_bds = n_bds;
+	iudma->bd_ring = dmam_alloc_coherent(udc->dev,
+		n_bds * sizeof(struct bcm_enet_desc),
+		&iudma->bd_ring_dma, GFP_KERNEL);
+	if (!iudma->bd_ring)
+		return -ENOMEM;
+	iudma->end_bd = &iudma->bd_ring[n_bds - 1];
+
+	return 0;
+}
+
+/**
+ * iudma_init - One-time initialization of all IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Enable DMA, flush channels, and enable global IUDMA IRQs.
+ */
+static int iudma_init(struct bcm63xx_udc *udc)
+{
+	int i, rc;
+
+	usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		rc = iudma_init_channel(udc, i);
+		if (rc)
+			return rc;
+		iudma_reset_channel(udc, &udc->iudma[i]);
+	}
+
+	usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG);
+	return 0;
+}
+
+/**
+ * iudma_uninit - Uninitialize IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Kill global IUDMA IRQs, flush channels, and kill DMA.
+ */
+static void iudma_uninit(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++)
+		iudma_reset_channel(udc, &udc->iudma[i]);
+
+	usb_dma_writel(udc, 0, ENETDMA_CFG_REG);
+}
+
+/***********************************************************************
+ * Other low-level USBD operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts.
+ * @udc: Reference to the device controller.
+ * @enable_irqs: true to enable, false to disable.
+ */
+static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs)
+{
+	u32 val;
+
+	usbd_writel(udc, 0, USBD_STATUS_REG);
+
+	val = BIT(USBD_EVENT_IRQ_USB_RESET) |
+	      BIT(USBD_EVENT_IRQ_SETUP) |
+	      BIT(USBD_EVENT_IRQ_SETCFG) |
+	      BIT(USBD_EVENT_IRQ_SETINTF) |
+	      BIT(USBD_EVENT_IRQ_USB_LINK);
+	usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG);
+}
+
+/**
+ * bcm63xx_select_phy_mode - Select between USB device and host mode.
+ * @udc: Reference to the device controller.
+ * @is_device: true for device, false for host.
+ *
+ * This should probably be reworked to use the drivers/usb/otg
+ * infrastructure.
+ *
+ * By default, the AFE/pullups are disabled in device mode, until
+ * bcm63xx_select_pullup() is called.
+ */
+static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	if (BCMCPU_IS_6328()) {
+		/* configure pinmux to sense VBUS signal */
+		val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG);
+		val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK;
+		val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV :
+			       GPIO_PINMUX_OTHR_6328_USB_HOST;
+		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+	}
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_device) {
+		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	} else {
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	}
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+	if (is_device)
+		val |= USBH_PRIV_SWAP_USBD_MASK;
+	else
+		val &= ~USBH_PRIV_SWAP_USBD_MASK;
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
+}
+
+/**
+ * bcm63xx_select_pullup - Enable/disable the pullup on D+
+ * @udc: Reference to the device controller.
+ * @is_on: true to enable the pullup, false to disable.
+ *
+ * If the pullup is active, the host will sense a FS/HS device connected to
+ * the port.  If the pullup is inactive, the host will think the USB
+ * device has been disconnected.
+ */
+static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_on)
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	else
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+}
+
+/**
+ * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal.
+ * @udc: Reference to the device controller.
+ *
+ * This just masks the IUDMA IRQs and releases the clocks.  It is assumed
+ * that bcm63xx_udc_stop() has already run, and the clocks are stopped.
+ */
+static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc)
+{
+	set_clocks(udc, true);
+	iudma_uninit(udc);
+	set_clocks(udc, false);
+
+	clk_put(udc->usbd_clk);
+	clk_put(udc->usbh_clk);
+}
+
+/**
+ * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
+{
+	int i, rc = 0;
+	u32 val;
+
+	udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT,
+					 GFP_KERNEL);
+	if (!udc->ep0_ctrl_buf)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	for (i = 0; i < BCM63XX_NUM_EP; i++) {
+		struct bcm63xx_ep *bep = &udc->bep[i];
+
+		bep->ep.name = bcm63xx_ep_name[i];
+		bep->ep_num = i;
+		bep->ep.ops = &bcm63xx_udc_ep_ops;
+		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
+		bep->halted = 0;
+		bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT;
+		bep->udc = udc;
+		bep->ep.desc = NULL;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	udc->gadget.ep0 = &udc->bep[0].ep;
+	list_del(&udc->bep[0].ep.ep_list);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->ep0state = EP0_SHUTDOWN;
+
+	udc->usbh_clk = clk_get(udc->dev, "usbh");
+	if (IS_ERR(udc->usbh_clk))
+		return -EIO;
+
+	udc->usbd_clk = clk_get(udc->dev, "usbd");
+	if (IS_ERR(udc->usbd_clk)) {
+		clk_put(udc->usbh_clk);
+		return -EIO;
+	}
+
+	set_clocks(udc, true);
+
+	val = USBD_CONTROL_AUTO_CSRS_MASK |
+	      USBD_CONTROL_DONE_CSRS_MASK |
+	      (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0);
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+
+	val = USBD_STRAPS_APP_SELF_PWR_MASK |
+	      USBD_STRAPS_APP_RAM_IF_MASK |
+	      USBD_STRAPS_APP_CSRPRGSUP_MASK |
+	      USBD_STRAPS_APP_8BITPHY_MASK |
+	      USBD_STRAPS_APP_RMTWKUP_MASK;
+
+	if (udc->gadget.max_speed == USB_SPEED_HIGH)
+		val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT);
+	else
+		val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT);
+	usbd_writel(udc, val, USBD_STRAPS_REG);
+
+	bcm63xx_set_ctrl_irqs(udc, false);
+
+	usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG);
+
+	val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) |
+	      USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG);
+
+	rc = iudma_init(udc);
+	set_clocks(udc, false);
+	if (rc)
+		bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+/***********************************************************************
+ * Standard EP gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_enable - Enable one endpoint.
+ * @ep: Endpoint to enable.
+ * @desc: Contains max packet, direction, etc.
+ *
+ * Most of the endpoint parameters are fixed in this controller, so there
+ * isn't much for this function to do.
+ */
+static int bcm63xx_ep_enable(struct usb_ep *ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	unsigned long flags;
+
+	if (!ep || !desc || ep->name == bcm63xx_ep0name)
+		return -EINVAL;
+
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	iudma->enabled = true;
+	BUG_ON(!list_empty(&bep->queue));
+
+	iudma_reset_channel(udc, iudma);
+
+	bep->halted = 0;
+	bcm63xx_set_stall(udc, bep, false);
+	clear_bit(bep->ep_num, &udc->wedgemap);
+
+	ep->desc = desc;
+	ep->maxpacket = usb_endpoint_maxp(desc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_ep_disable - Disable one endpoint.
+ * @ep: Endpoint to disable.
+ */
+static int bcm63xx_ep_disable(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	struct list_head *pos, *n;
+	unsigned long flags;
+
+	if (!ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+	iudma->enabled = false;
+
+	iudma_reset_channel(udc, iudma);
+
+	if (!list_empty(&bep->queue)) {
+		list_for_each_safe(pos, n, &bep->queue) {
+			struct bcm63xx_req *breq =
+				list_entry(pos, struct bcm63xx_req, queue);
+
+			usb_gadget_unmap_request(&udc->gadget, &breq->req,
+						 iudma->is_tx);
+			list_del(&breq->queue);
+			breq->req.status = -ESHUTDOWN;
+
+			spin_unlock_irqrestore(&udc->lock, flags);
+			breq->req.complete(&iudma->bep->ep, &breq->req);
+			spin_lock_irqsave(&udc->lock, flags);
+		}
+	}
+	ep->desc = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_alloc_request - Allocate a new request.
+ * @ep: Endpoint associated with the request.
+ * @mem_flags: Flags to pass to kzalloc().
+ */
+static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_req *breq;
+
+	breq = kzalloc(sizeof(*breq), mem_flags);
+	if (!breq)
+		return NULL;
+	return &breq->req;
+}
+
+/**
+ * bcm63xx_udc_free_request - Free a request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to free.
+ */
+static void bcm63xx_udc_free_request(struct usb_ep *ep,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	kfree(breq);
+}
+
+/**
+ * bcm63xx_udc_queue - Queue up a new request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to add.
+ * @mem_flags: Unused.
+ *
+ * If the queue is empty, start this request immediately.  Otherwise, add
+ * it to the list.
+ *
+ * ep0 replies are sent through this function from the gadget driver, but
+ * they are treated differently because they need to be handled by the ep0
+ * state machine.  (Sometimes they are replies to control requests that
+ * were spoofed by this driver, and so they shouldn't be transmitted at all.)
+ */
+static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req);
+	unsigned long flags;
+	int rc = 0;
+
+	if (unlikely(!req || !req->complete || !req->buf || !ep))
+		return -EINVAL;
+
+	req->actual = 0;
+	req->status = 0;
+	breq->offset = 0;
+
+	if (bep == &udc->bep[0]) {
+		/* only one reply per request, please */
+		if (udc->ep0_reply)
+			return -EINVAL;
+
+		udc->ep0_reply = req;
+		schedule_work(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!bep->iudma->enabled) {
+		rc = -ESHUTDOWN;
+		goto out;
+	}
+
+	rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx);
+	if (rc == 0) {
+		list_add_tail(&breq->queue, &bep->queue);
+		if (list_is_singular(&bep->queue))
+			iudma_write(udc, bep->iudma, breq);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_dequeue - Remove a pending request from the queue.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to remove.
+ *
+ * If the request is not at the head of the queue, this is easy - just nuke
+ * it.  If the request is at the head of the queue, we'll need to stop the
+ * DMA transaction and then queue up the successor.
+ */
+static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req), *cur;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (list_empty(&bep->queue)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+	usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx);
+
+	if (breq == cur) {
+		iudma_reset_channel(udc, bep->iudma);
+		list_del(&breq->queue);
+
+		if (!list_empty(&bep->queue)) {
+			struct bcm63xx_req *next;
+
+			next = list_first_entry(&bep->queue,
+				struct bcm63xx_req, queue);
+			iudma_write(udc, bep->iudma, next);
+		}
+	} else {
+		list_del(&breq->queue);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	req->status = -ESHUTDOWN;
+	req->complete(ep, req);
+
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware.
+ * @ep: Endpoint to halt.
+ * @value: Zero to clear halt; nonzero to set halt.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	bcm63xx_set_stall(udc, bep, !!value);
+	bep->halted = value;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset.
+ * @ep: Endpoint to wedge.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_wedge(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	set_bit(bep->ep_num, &udc->wedgemap);
+	bcm63xx_set_stall(udc, bep, true);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops = {
+	.enable		= bcm63xx_ep_enable,
+	.disable	= bcm63xx_ep_disable,
+
+	.alloc_request	= bcm63xx_udc_alloc_request,
+	.free_request	= bcm63xx_udc_free_request,
+
+	.queue		= bcm63xx_udc_queue,
+	.dequeue	= bcm63xx_udc_dequeue,
+
+	.set_halt	= bcm63xx_udc_set_halt,
+	.set_wedge	= bcm63xx_udc_set_wedge,
+};
+
+/***********************************************************************
+ * EP0 handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback.
+ * @udc: Reference to the device controller.
+ * @ctrl: 8-byte SETUP request.
+ */
+static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc,
+	struct usb_ctrlrequest *ctrl)
+{
+	int rc;
+
+	spin_unlock_irq(&udc->lock);
+	rc = udc->driver->setup(&udc->gadget, ctrl);
+	spin_lock_irq(&udc->lock);
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request.
+ * @udc: Reference to the device controller.
+ *
+ * Many standard requests are handled automatically in the hardware, but
+ * we still need to pass them to the gadget driver so that it can
+ * reconfigure the interfaces/endpoints if necessary.
+ *
+ * Unfortunately we are not able to send a STALL response if the host
+ * requests an invalid configuration.  If this happens, we'll have to be
+ * content with printing a warning.
+ */
+static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE;
+	ctrl.bRequest = USB_REQ_SET_CONFIGURATION;
+	ctrl.wValue = cpu_to_le16(udc->cfg);
+	ctrl.wIndex = 0;
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_CONFIGURATION(%d) request\n",
+			udc->cfg);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE;
+	ctrl.bRequest = USB_REQ_SET_INTERFACE;
+	ctrl.wValue = cpu_to_le16(udc->alt_iface);
+	ctrl.wIndex = cpu_to_le16(udc->iface);
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_INTERFACE(%d,%d) request\n",
+			udc->iface, udc->alt_iface);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_map_write - dma_map and iudma_write a single request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @req: USB gadget layer representation of the request.
+ */
+static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+
+	BUG_ON(udc->ep0_request);
+	udc->ep0_request = req;
+
+	req->actual = 0;
+	breq->offset = 0;
+	usb_gadget_map_request(&udc->gadget, req, iudma->is_tx);
+	iudma_write(udc, iudma, breq);
+}
+
+/**
+ * bcm63xx_ep0_complete - Set completion status and "stage" the callback.
+ * @udc: Reference to the device controller.
+ * @req: USB gadget layer representation of the request.
+ * @status: Status to return to the gadget driver.
+ */
+static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc,
+	struct usb_request *req, int status)
+{
+	req->status = status;
+	if (status)
+		req->actual = 0;
+	if (req->complete) {
+		spin_unlock_irq(&udc->lock);
+		req->complete(&udc->bep[0].ep, req);
+		spin_lock_irq(&udc->lock);
+	}
+}
+
+/**
+ * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to
+ *   reset/shutdown.
+ * @udc: Reference to the device controller.
+ * @is_tx: Nonzero for TX (IN), zero for RX (OUT).
+ */
+static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx)
+{
+	struct usb_request *req = udc->ep0_reply;
+
+	udc->ep0_reply = NULL;
+	usb_gadget_unmap_request(&udc->gadget, req, is_tx);
+	if (udc->ep0_request == req) {
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+	}
+	bcm63xx_ep0_complete(udc, req, -ESHUTDOWN);
+}
+
+/**
+ * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return
+ *   transfer len.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc)
+{
+	struct usb_request *req = udc->ep0_request;
+
+	udc->ep0_req_completed = 0;
+	udc->ep0_request = NULL;
+
+	return req->actual;
+}
+
+/**
+ * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @length: Number of bytes to TX/RX.
+ *
+ * Used for simple transfers performed by the ep0 worker.  This will always
+ * use ep0_ctrl_req / ep0_ctrl_buf.
+ */
+static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx,
+	int length)
+{
+	struct usb_request *req = &udc->ep0_ctrl_req.req;
+
+	req->buf = udc->ep0_ctrl_buf;
+	req->length = length;
+	req->complete = NULL;
+
+	bcm63xx_ep0_map_write(udc, ch_idx, req);
+}
+
+/**
+ * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it.
+ * @udc: Reference to the device controller.
+ *
+ * EP0_IDLE probably shouldn't ever happen.  EP0_REQUEUE means we're ready
+ * for the next packet.  Anything else means the transaction requires multiple
+ * stages of handling.
+ */
+static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc)
+{
+	int rc;
+	struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf;
+
+	rc = bcm63xx_ep0_read_complete(udc);
+
+	if (rc < 0) {
+		dev_err(udc->dev, "missing SETUP packet\n");
+		return EP0_IDLE;
+	}
+
+	/*
+	 * Handle 0-byte IN STATUS acknowledgement.  The hardware doesn't
+	 * ALWAYS deliver these 100% of the time, so if we happen to see one,
+	 * just throw it away.
+	 */
+	if (rc == 0)
+		return EP0_REQUEUE;
+
+	/* Drop malformed SETUP packets */
+	if (rc != sizeof(*ctrl)) {
+		dev_warn_ratelimited(udc->dev,
+			"malformed SETUP packet (%d bytes)\n", rc);
+		return EP0_REQUEUE;
+	}
+
+	/* Process new SETUP packet arriving on ep0 */
+	rc = bcm63xx_ep0_setup_callback(udc, ctrl);
+	if (rc < 0) {
+		bcm63xx_set_stall(udc, &udc->bep[0], true);
+		return EP0_REQUEUE;
+	}
+
+	if (!ctrl->wLength)
+		return EP0_REQUEUE;
+	else if (ctrl->bRequestType & USB_DIR_IN)
+		return EP0_IN_DATA_PHASE_SETUP;
+	else
+		return EP0_OUT_DATA_PHASE_SETUP;
+}
+
+/**
+ * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle.
+ * @udc: Reference to the device controller.
+ *
+ * In state EP0_IDLE, the RX descriptor is either pending, or has been
+ * filled with a SETUP packet from the host.  This function handles new
+ * SETUP packets, control IRQ events (which can generate fake SETUP packets),
+ * and reset/shutdown events.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc)
+{
+	if (udc->ep0_req_reset) {
+		udc->ep0_req_reset = 0;
+	} else if (udc->ep0_req_set_cfg) {
+		udc->ep0_req_set_cfg = 0;
+		if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_set_iface) {
+		udc->ep0_req_set_iface = 0;
+		if (bcm63xx_ep0_spoof_set_iface(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_completed) {
+		udc->ep0state = bcm63xx_ep0_do_setup(udc);
+		return udc->ep0state == EP0_IDLE ? -EAGAIN : 0;
+	} else if (udc->ep0_req_shutdown) {
+		udc->ep0_req_shutdown = 0;
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+		iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+		usb_gadget_unmap_request(&udc->gadget,
+			&udc->ep0_ctrl_req.req, 0);
+
+		/* bcm63xx_udc_pullup() is waiting for this */
+		mb();
+		udc->ep0state = EP0_SHUTDOWN;
+	} else if (udc->ep0_reply) {
+		/*
+		 * This could happen if a USB RESET shows up during an ep0
+		 * transaction (especially if a laggy driver like gadgetfs
+		 * is in use).
+		 */
+		dev_warn(udc->dev, "nuking unexpected reply\n");
+		bcm63xx_ep0_nuke_reply(udc, 0);
+	} else {
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_one_round - Handle the current ep0 state.
+ * @udc: Reference to the device controller.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc)
+{
+	enum bcm63xx_ep0_state ep0state = udc->ep0state;
+	bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown;
+
+	switch (udc->ep0state) {
+	case EP0_REQUEUE:
+		/* set up descriptor to receive SETUP packet */
+		bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN,
+					     BCM63XX_MAX_CTRL_PKT);
+		ep0state = EP0_IDLE;
+		break;
+	case EP0_IDLE:
+		return bcm63xx_ep0_do_idle(udc);
+	case EP0_IN_DATA_PHASE_SETUP:
+		/*
+		 * Normal case: TX request is in ep0_reply (queued by the
+		 * callback), or will be queued shortly.  When it's here,
+		 * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE.
+		 *
+		 * Shutdown case: Stop waiting for the reply.  Just
+		 * REQUEUE->IDLE.  The gadget driver is NOT expected to
+		 * queue anything else now.
+		 */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_IN_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_DATA_PHASE_COMPLETE: {
+		/*
+		 * Normal case: TX packet (ep0_reply) is in flight; wait for
+		 * it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: Reset the TX channel, send -ESHUTDOWN
+		 * completion to the gadget driver, then REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+			/*
+			 * the "ack" sometimes gets eaten (see
+			 * bcm63xx_ep0_do_idle)
+			 */
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 1);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_DATA_PHASE_SETUP:
+		/* Similar behavior to EP0_IN_DATA_PHASE_SETUP */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_OUT_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_OUT_DATA_PHASE_COMPLETE: {
+		/* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+
+			/* send 0-byte ack to host */
+			bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0);
+			ep0state = EP0_OUT_STATUS_PHASE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 0);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_STATUS_PHASE:
+		/*
+		 * Normal case: 0-byte OUT ack packet is in flight; wait
+		 * for it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: just cancel the transmission.  Don't bother
+		 * calling the completion, because it originated from this
+		 * function anyway.  Then go back to REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			bcm63xx_ep0_read_complete(udc);
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			udc->ep0_request = NULL;
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_FAKE_STATUS_PHASE: {
+		/*
+		 * Normal case: we spoofed a SETUP packet and are now
+		 * waiting for the gadget driver to send a 0-byte reply.
+		 * This doesn't actually get sent to the HW because the
+		 * HW has already sent its own reply.  Once we get the
+		 * response, return to IDLE.
+		 *
+		 * Shutdown case: return to IDLE immediately.
+		 *
+		 * Note that the ep0 RX descriptor has remained queued
+		 * (and possibly unfilled) during this entire transaction.
+		 * The HW datapath (IUDMA) never even sees SET_CONFIGURATION
+		 * or SET_INTERFACE transactions.
+		 */
+		struct usb_request *r = udc->ep0_reply;
+
+		if (!r) {
+			if (shutdown)
+				ep0state = EP0_IDLE;
+			break;
+		}
+
+		bcm63xx_ep0_complete(udc, r, 0);
+		udc->ep0_reply = NULL;
+		ep0state = EP0_IDLE;
+		break;
+	}
+	case EP0_SHUTDOWN:
+		break;
+	}
+
+	if (udc->ep0state == ep0state)
+		return -EAGAIN;
+
+	udc->ep0state = ep0state;
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_process - ep0 worker thread / state machine.
+ * @w: Workqueue struct.
+ *
+ * bcm63xx_ep0_process is triggered any time an event occurs on ep0.  It
+ * is used to synchronize ep0 events and ensure that both HW and SW events
+ * occur in a well-defined order.  When the ep0 IUDMA queues are idle, it may
+ * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed
+ * by the USBD hardware.
+ *
+ * The worker function will continue iterating around the state machine
+ * until there is nothing left to do.  Usually "nothing left to do" means
+ * that we're waiting for a new event from the hardware.
+ */
+static void bcm63xx_ep0_process(struct work_struct *w)
+{
+	struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq);
+	spin_lock_irq(&udc->lock);
+	while (bcm63xx_ep0_one_round(udc) == 0)
+		;
+	spin_unlock_irq(&udc->lock);
+}
+
+/***********************************************************************
+ * Standard UDC gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_get_frame - Read current SOF frame number from the HW.
+ * @gadget: USB slave device.
+ */
+static int bcm63xx_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+
+	return (usbd_readl(udc, USBD_STATUS_REG) &
+		USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT;
+}
+
+/**
+ * bcm63xx_udc_pullup - Enable/disable pullup on D+ line.
+ * @gadget: USB slave device.
+ * @is_on: 0 to disable pullup, 1 to enable.
+ *
+ * See notes in bcm63xx_select_pullup().
+ */
+static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+	int i, rc = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (is_on && udc->ep0state == EP0_SHUTDOWN) {
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		udc->ep0state = EP0_REQUEUE;
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP);
+		for (i = 0; i < BCM63XX_NUM_EP; i++)
+			bcm63xx_set_stall(udc, &udc->bep[i], false);
+
+		bcm63xx_set_ctrl_irqs(udc, true);
+		bcm63xx_select_pullup(gadget_to_udc(gadget), true);
+		rc = 0;
+	} else if (!is_on && udc->ep0state != EP0_SHUTDOWN) {
+		bcm63xx_select_pullup(gadget_to_udc(gadget), false);
+
+		udc->ep0_req_shutdown = 1;
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		while (1) {
+			schedule_work(&udc->ep0_wq);
+			if (udc->ep0state == EP0_SHUTDOWN)
+				break;
+			msleep(50);
+		}
+		bcm63xx_set_ctrl_irqs(udc, false);
+		cancel_work_sync(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_start - Start the controller.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ */
+static int bcm63xx_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	if (!driver || driver->max_speed < USB_SPEED_HIGH ||
+	    !driver->setup)
+		return -EINVAL;
+	if (!udc)
+		return -ENODEV;
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	set_clocks(udc, true);
+	bcm63xx_fifo_setup(udc);
+	bcm63xx_ep_init(udc);
+	bcm63xx_ep_setup(udc);
+	bcm63xx_fifo_reset(udc);
+	bcm63xx_select_phy_mode(udc, true);
+
+	udc->driver = driver;
+	driver->driver.bus = NULL;
+	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_stop - Shut down the controller.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ */
+static int bcm63xx_udc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->driver = NULL;
+	udc->gadget.dev.driver = NULL;
+
+	/*
+	 * If we switch the PHY too abruptly after dropping D+, the host
+	 * will often complain:
+	 *
+	 *     hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
+	 */
+	msleep(100);
+
+	bcm63xx_select_phy_mode(udc, false);
+	set_clocks(udc, false);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops bcm63xx_udc_ops = {
+	.get_frame	= bcm63xx_udc_get_frame,
+	.pullup		= bcm63xx_udc_pullup,
+	.udc_start	= bcm63xx_udc_start,
+	.udc_stop	= bcm63xx_udc_stop,
+};
+
+/***********************************************************************
+ * IRQ handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_update_cfg_iface - Read current configuration/interface settings.
+ * @udc: Reference to the device controller.
+ *
+ * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages.
+ * The driver never sees the raw control packets coming in on the ep0
+ * IUDMA channel, but at least we get an interrupt event to tell us that
+ * new values are waiting in the USBD_STATUS register.
+ */
+static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+
+	udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT;
+	udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT;
+	udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >>
+			 USBD_STATUS_ALTINTF_SHIFT;
+	bcm63xx_ep_setup(udc);
+}
+
+/**
+ * bcm63xx_update_link_speed - Check to see if the link speed has changed.
+ * @udc: Reference to the device controller.
+ *
+ * The link speed update coincides with a SETUP IRQ.  Returns 1 if the
+ * speed has changed, so that the caller can update the endpoint settings.
+ */
+static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+	enum usb_device_speed oldspeed = udc->gadget.speed;
+
+	switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) {
+	case BCM63XX_SPD_HIGH:
+		udc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case BCM63XX_SPD_FULL:
+		udc->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		/* this should never happen */
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		dev_err(udc->dev,
+			"received SETUP packet with invalid link speed\n");
+		return 0;
+	}
+
+	if (udc->gadget.speed != oldspeed) {
+		dev_info(udc->dev, "link up, %s-speed mode\n",
+			 udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/**
+ * bcm63xx_update_wedge - Iterate through wedged endpoints.
+ * @udc: Reference to the device controller.
+ * @new_status: true to "refresh" wedge status; false to clear it.
+ *
+ * On a SETUP interrupt, we need to manually "refresh" the wedge status
+ * because the controller hardware is designed to automatically clear
+ * stalls in response to a CLEAR_FEATURE request from the host.
+ *
+ * On a RESET interrupt, we do want to restore all wedged endpoints.
+ */
+static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status)
+{
+	int i;
+
+	for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) {
+		bcm63xx_set_stall(udc, &udc->bep[i], new_status);
+		if (!new_status)
+			clear_bit(i, &udc->wedgemap);
+	}
+}
+
+/**
+ * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the device controller.
+ *
+ * This is where we handle link (VBUS) down, USB reset, speed changes,
+ * SET_CONFIGURATION, and SET_INTERFACE events.
+ */
+static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id)
+{
+	struct bcm63xx_udc *udc = dev_id;
+	u32 stat;
+	bool disconnected = false;
+
+	stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) &
+	       usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG);
+
+	usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG);
+
+	spin_lock(&udc->lock);
+	if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) {
+		/* VBUS toggled */
+
+		if (!(usbd_readl(udc, USBD_EVENTS_REG) &
+		      USBD_EVENTS_USB_LINK_MASK) &&
+		      udc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_info(udc->dev, "link down\n");
+
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		disconnected = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) {
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bcm63xx_update_wedge(udc, false);
+
+		udc->ep0_req_reset = 1;
+		schedule_work(&udc->ep0_wq);
+		disconnected = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETUP)) {
+		if (bcm63xx_update_link_speed(udc)) {
+			bcm63xx_fifo_setup(udc);
+			bcm63xx_ep_setup(udc);
+		}
+		bcm63xx_update_wedge(udc, true);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_cfg = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_iface = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	spin_unlock(&udc->lock);
+
+	if (disconnected && udc->driver)
+		udc->driver->disconnect(&udc->gadget);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * bcm63xx_udc_data_isr - ISR for data path events (IUDMA).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the IUDMA channel that generated the interrupt.
+ *
+ * For the two ep0 channels, we have special handling that triggers the
+ * ep0 worker thread.  For normal bulk/intr channels, either queue up
+ * the next buffer descriptor for the transaction (incomplete transaction),
+ * or invoke the completion callback (complete transactions).
+ */
+static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
+{
+	struct iudma_ch *iudma = dev_id;
+	struct bcm63xx_udc *udc = iudma->udc;
+	struct bcm63xx_ep *bep;
+	struct usb_request *req = NULL;
+	struct bcm63xx_req *breq = NULL;
+	int rc;
+	bool is_done = false;
+
+	spin_lock(&udc->lock);
+
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IR_REG(iudma->ch_idx));
+	bep = iudma->bep;
+	rc = iudma_read(udc, iudma);
+
+	/* special handling for EP0 RX (0) and TX (1) */
+	if (iudma->ch_idx == IUDMA_EP0_RXCHAN ||
+	    iudma->ch_idx == IUDMA_EP0_TXCHAN) {
+		req = udc->ep0_request;
+		breq = our_req(req);
+
+		/* a single request could require multiple submissions */
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				udc->ep0_req_completed = 1;
+				is_done = true;
+				schedule_work(&udc->ep0_wq);
+
+				/* "actual" on a ZLP is 1 byte */
+				req->actual = min(req->actual, req->length);
+			} else {
+				/* queue up the next BD (same request) */
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	} else if (!list_empty(&bep->queue)) {
+		breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+		req = &breq->req;
+
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				is_done = true;
+				list_del(&breq->queue);
+
+				req->actual = min(req->actual, req->length);
+
+				if (!list_empty(&bep->queue)) {
+					struct bcm63xx_req *next;
+
+					next = list_first_entry(&bep->queue,
+						struct bcm63xx_req, queue);
+					iudma_write(udc, iudma, next);
+				}
+			} else {
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	}
+	spin_unlock(&udc->lock);
+
+	if (is_done) {
+		usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx);
+		if (req->complete)
+			req->complete(&bep->ep, req);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/***********************************************************************
+ * Debug filesystem
+ ***********************************************************************/
+
+/*
+ * bcm63xx_usbd_dbg_show - Show USBD controller state.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd
+ */
+static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	seq_printf(s, "ep0 state: %s\n",
+		   bcm63xx_ep0_state_names[udc->ep0state]);
+	seq_printf(s, "  pending requests: %s%s%s%s%s%s%s\n",
+		   udc->ep0_req_reset ? "reset " : "",
+		   udc->ep0_req_set_cfg ? "set_cfg " : "",
+		   udc->ep0_req_set_iface ? "set_iface " : "",
+		   udc->ep0_req_shutdown ? "shutdown " : "",
+		   udc->ep0_request ? "pending " : "",
+		   udc->ep0_req_completed ? "completed " : "",
+		   udc->ep0_reply ? "reply " : "");
+	seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n",
+		   udc->cfg, udc->iface, udc->alt_iface);
+	seq_printf(s, "regs:\n");
+	seq_printf(s, "  control: %08x; straps: %08x; status: %08x\n",
+		   usbd_readl(udc, USBD_CONTROL_REG),
+		   usbd_readl(udc, USBD_STRAPS_REG),
+		   usbd_readl(udc, USBD_STATUS_REG));
+	seq_printf(s, "  events:  %08x; stall:  %08x\n",
+		   usbd_readl(udc, USBD_EVENTS_REG),
+		   usbd_readl(udc, USBD_STALL_REG));
+
+	return 0;
+}
+
+/*
+ * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma
+ */
+static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+	int ch_idx, i;
+	u32 sram2, sram3;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) {
+		struct iudma_ch *iudma = &udc->iudma[ch_idx];
+		struct list_head *pos;
+
+		seq_printf(s, "IUDMA channel %d -- ", ch_idx);
+		switch (iudma_defaults[ch_idx].ep_type) {
+		case BCMEP_CTRL:
+			seq_printf(s, "control");
+			break;
+		case BCMEP_BULK:
+			seq_printf(s, "bulk");
+			break;
+		case BCMEP_INTR:
+			seq_printf(s, "interrupt");
+			break;
+		}
+		seq_printf(s, ch_idx & 0x01 ? " tx" : " rx");
+		seq_printf(s, " [ep%d]:\n",
+			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
+		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+
+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+			   sram2 >> 16, sram2 & 0xffff,
+			   sram3 >> 16, sram3 & 0xffff,
+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
+			   iudma->n_bds);
+
+		if (iudma->bep) {
+			i = 0;
+			list_for_each(pos, &iudma->bep->queue)
+				i++;
+			seq_printf(s, "; %d queued\n", i);
+		} else {
+			seq_printf(s, "\n");
+		}
+
+		for (i = 0; i < iudma->n_bds; i++) {
+			struct bcm_enet_desc *d = &iudma->bd_ring[i];
+
+			seq_printf(s, "  %03x (%02x): len_stat: %04x_%04x; pa %08x",
+				   i * sizeof(*d), i,
+				   d->len_stat >> 16, d->len_stat & 0xffff,
+				   d->address);
+			if (d == iudma->read_bd)
+				seq_printf(s, "   <<RD");
+			if (d == iudma->write_bd)
+				seq_printf(s, "   <<WR");
+			seq_printf(s, "\n");
+		}
+
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+
+static int bcm63xx_usbd_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bcm63xx_usbd_dbg_show, inode->i_private);
+}
+
+static int bcm63xx_iudma_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bcm63xx_iudma_dbg_show, inode->i_private);
+}
+
+static const struct file_operations usbd_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bcm63xx_usbd_dbg_open,
+	.llseek		= seq_lseek,
+	.read		= seq_read,
+	.release	= single_release,
+};
+
+static const struct file_operations iudma_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bcm63xx_iudma_dbg_open,
+	.llseek		= seq_lseek,
+	.read		= seq_read,
+	.release	= single_release,
+};
+
+
+/**
+ * bcm63xx_udc_init_debugfs - Create debugfs entries.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc)
+{
+	struct dentry *root, *usbd, *iudma;
+
+	if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS))
+		return;
+
+	root = debugfs_create_dir(udc->gadget.name, NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+
+	usbd = debugfs_create_file("usbd", 0400, root, udc,
+			&usbd_dbg_fops);
+	if (!usbd)
+		goto err_usbd;
+	iudma = debugfs_create_file("iudma", 0400, root, udc,
+			&iudma_dbg_fops);
+	if (!iudma)
+		goto err_iudma;
+
+	udc->debugfs_root = root;
+	udc->debugfs_usbd = usbd;
+	udc->debugfs_iudma = iudma;
+	return;
+err_iudma:
+	debugfs_remove(usbd);
+err_usbd:
+	debugfs_remove(root);
+err_root:
+	dev_err(udc->dev, "debugfs is not available\n");
+}
+
+/**
+ * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries.
+ * @udc: Reference to the device controller.
+ *
+ * debugfs_remove() is safe to call with a NULL argument.
+ */
+static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc)
+{
+	debugfs_remove(udc->debugfs_iudma);
+	debugfs_remove(udc->debugfs_usbd);
+	debugfs_remove(udc->debugfs_root);
+	udc->debugfs_iudma = NULL;
+	udc->debugfs_usbd = NULL;
+	udc->debugfs_root = NULL;
+}
+
+/***********************************************************************
+ * Driver init/exit
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_gadget_release - Called from device_release().
+ * @dev: Unused.
+ *
+ * We get a warning if this function doesn't exist, but it's empty because
+ * we don't have to free any of the memory allocated with the devm_* APIs.
+ */
+static void bcm63xx_udc_gadget_release(struct device *dev)
+{
+}
+
+/**
+ * bcm63xx_udc_probe - Initialize a new instance of the UDC.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ *
+ * Note that platform data is required, because pd.port_no varies from chip
+ * to chip and is used to switch the correct USB port to device mode.
+ */
+static int __devinit bcm63xx_udc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm63xx_usbd_platform_data *pd = dev->platform_data;
+	struct bcm63xx_udc *udc;
+	struct resource *res;
+	int rc = -ENOMEM, i, irq;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc) {
+		dev_err(dev, "cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, udc);
+	udc->dev = dev;
+	udc->pd = pd;
+
+	if (!pd) {
+		dev_err(dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "error finding USBD resource\n");
+		return -ENXIO;
+	}
+	udc->usbd_regs = devm_request_and_ioremap(dev, res);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(dev, "error finding IUDMA resource\n");
+		return -ENXIO;
+	}
+	udc->iudma_regs = devm_request_and_ioremap(dev, res);
+
+	if (!udc->usbd_regs || !udc->iudma_regs) {
+		dev_err(dev, "error requesting resources\n");
+		return -ENXIO;
+	}
+
+	spin_lock_init(&udc->lock);
+	INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process);
+	dev_set_name(&udc->gadget.dev, "gadget");
+
+	udc->gadget.ops = &bcm63xx_udc_ops;
+	udc->gadget.name = dev_name(dev);
+	udc->gadget.dev.parent = dev;
+	udc->gadget.dev.release = bcm63xx_udc_gadget_release;
+	udc->gadget.dev.dma_mask = dev->dma_mask;
+
+	if (!pd->use_fullspeed && !use_fullspeed)
+		udc->gadget.max_speed = USB_SPEED_HIGH;
+	else
+		udc->gadget.max_speed = USB_SPEED_FULL;
+
+	/* request clocks, allocate buffers, and clear any pending IRQs */
+	rc = bcm63xx_init_udc_hw(udc);
+	if (rc)
+		return rc;
+
+	rc = -ENXIO;
+
+	/* IRQ resource #0: control interrupt (VBUS, speed, etc.) */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "missing IRQ resource #0\n");
+		goto out_uninit;
+	}
+	if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
+			     dev_name(dev), udc) < 0) {
+		dev_err(dev, "error requesting IRQ #%d\n", irq);
+		goto out_uninit;
+	}
+
+	/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		irq = platform_get_irq(pdev, i + 1);
+		if (irq < 0) {
+			dev_err(dev, "missing IRQ resource #%d\n", i + 1);
+			goto out_uninit;
+		}
+		if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
+				     dev_name(dev), &udc->iudma[i]) < 0) {
+			dev_err(dev, "error requesting IRQ #%d\n", irq);
+			goto out_uninit;
+		}
+	}
+
+	rc = device_register(&udc->gadget.dev);
+	if (rc)
+		goto out_uninit;
+
+	bcm63xx_udc_init_debugfs(udc);
+	rc = usb_add_gadget_udc(dev, &udc->gadget);
+	if (!rc)
+		return 0;
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+	device_unregister(&udc->gadget.dev);
+out_uninit:
+	bcm63xx_uninit_udc_hw(udc);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_remove - Remove the device from the system.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ */
+static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+	usb_del_gadget_udc(&udc->gadget);
+	device_unregister(&udc->gadget.dev);
+	BUG_ON(udc->driver);
+
+	platform_set_drvdata(pdev, NULL);
+	bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+static struct platform_driver bcm63xx_udc_driver = {
+	.probe		= bcm63xx_udc_probe,
+	.remove		= __devexit_p(bcm63xx_udc_remove),
+	.driver		= {
+		.name	= DRV_MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(bcm63xx_udc_driver);
+
+MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller");
+MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index b8b3a3411218..0ccca58e7a8f 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -28,6 +28,7 @@
 #define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
 #define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
 #define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
+#define gadget_is_bcm63xx(g)		(!strcmp("bcm63xx_udc", (g)->name))
 #define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
 #define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
@@ -121,6 +122,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x32;
 	else if (gadget_is_lpc32xx(gadget))
 		return 0x33;
+	else if (gadget_is_bcm63xx(gadget))
+		return 0x34;
 
 	return -ENOENT;
 }
-- 
cgit v1.2.3


From e4730931143398ec32088af32e985ec413739c10 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:00 +0200
Subject: staging: ccg: Add a note about compatibility issues.

The first item on the todo list is a new user interface. Put this
information into Kconfig's help entry to people are not too confusing
once an user API changes which does not happen in kernel otherwise.

Cc: devel@driverdev.osuosl.org
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/staging/ccg/Kconfig | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig
index 1f00d701da25..df166652599f 100644
--- a/drivers/staging/ccg/Kconfig
+++ b/drivers/staging/ccg/Kconfig
@@ -17,4 +17,9 @@ config USB_G_CCG
 	  Configurable Composite Gadget can be compiled "M" only
 	  or not at all.
 
+	  BIG FAT NOTE: DON'T RELY ON THIS USERINTERFACE HERE! AS PART
+	  OF THE REWORK DONE HERE WILL BE A NEW USER INTERFACE WITHOUT ANY
+	  COMPATIBILITY TO THIS SYSFS INTERFACE HERE. BE AWARE OF THIS
+	  BEFORE SELECTING THIS.
+
 endif # USB_GADGET
-- 
cgit v1.2.3


From fac3a43e0ab20dbf5e845c6221ead0d073984f41 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:01 +0200
Subject: usb: gadget: move bind callback into driver struct
 usb_composite_driver

It was moved to be an argument in 07a18bd716ed5 ("usb gadget: don't
save bind callback in struct usb_composite_driver"). The reason was to
avoid the section missmatch. The warning was shown because ->bind is
marked as __init becuase it is a one time init. The warning can be also
suppresed by whitelisting the variable i.e. rename it to lets say _probe.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 10 ++++++----
 include/linux/usb/composite.h  | 13 +++++++++----
 2 files changed, 15 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 91411a6d741b..402e5bd8b3e5 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -32,7 +32,6 @@
 #define USB_BUFSIZ	1024
 
 static struct usb_composite_driver *composite;
-static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
 /* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
@@ -1468,7 +1467,7 @@ static int composite_bind(struct usb_gadget *gadget)
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
 	 */
-	status = composite_gadget_bind(cdev);
+	status = composite->bind(cdev);
 	if (status < 0)
 		goto fail;
 
@@ -1621,7 +1620,9 @@ static struct usb_gadget_driver composite_driver = {
 int usb_composite_probe(struct usb_composite_driver *driver,
 			       int (*bind)(struct usb_composite_dev *cdev))
 {
-	if (!driver || !driver->dev || !bind || composite)
+	if (!driver || !driver->dev || composite)
+		return -EINVAL;
+	if (!bind && !driver->bind)
 		return -EINVAL;
 
 	if (!driver->name)
@@ -1632,7 +1633,8 @@ int usb_composite_probe(struct usb_composite_driver *driver,
 	composite_driver.driver.name = driver->name;
 	composite_driver.max_speed = driver->max_speed;
 	composite = driver;
-	composite_gadget_bind = bind;
+	if (!driver->bind)
+		driver->bind = bind;
 
 	return usb_gadget_probe_driver(&composite_driver, composite_bind);
 }
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 9d8c3b634493..3153f73ae083 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -257,12 +257,16 @@ void usb_remove_config(struct usb_composite_dev *,
  *	not set.
  * @dev: Template descriptor for the device, including default device
  *	identifiers.
- * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * @strings: tables of strings, keyed by identifiers assigned during @bind
  *	and language IDs provided in control requests
  * @max_speed: Highest speed the driver supports.
  * @needs_serial: set to 1 if the gadget needs userspace to provide
  * 	a serial number.  If one is not provided, warning will be printed.
- * @unbind: Reverses bind; called as a side effect of unregistering
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config(). This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind; called as a side effect of unregistering
  *	this driver.
  * @disconnect: optional driver disconnect method
  * @suspend: Notifies when the host stops sending USB traffic,
@@ -271,9 +275,9 @@ void usb_remove_config(struct usb_composite_dev *,
  *	before function notifications
  *
  * Devices default to reporting self powered operation.  Devices which rely
- * on bus powered operation should report this in their @bind() method.
+ * on bus powered operation should report this in their @bind method.
  *
- * Before returning from bind, various fields in the template descriptor
+ * Before returning from @bind, various fields in the template descriptor
  * may be overridden.  These include the idVendor/idProduct/bcdDevice values
  * normally to bind the appropriate host side driver, and the three strings
  * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
@@ -291,6 +295,7 @@ struct usb_composite_driver {
 	enum usb_device_speed			max_speed;
 	unsigned		needs_serial:1;
 
+	int			(*bind)(struct usb_composite_dev *cdev);
 	int			(*unbind)(struct usb_composite_dev *);
 
 	void			(*disconnect)(struct usb_composite_dev *);
-- 
cgit v1.2.3


From 1e1a27c3258c769ea175780bb28d0c8fead79ff8 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:02 +0200
Subject: usb: gadget: remove __devexit in f_uac2

avoids the following section missmatch
|WARNING: drivers/usb/gadget/g_audio.o(.init.text+0x2e7): Section
|mismatch in reference from the function afunc_bind() to the function
|.devexit.text:snd_uac2_remove()
|The function __init afunc_bind() references
|a function __devexit snd_uac2_remove().
|This is often seen when error handling in the init function
|uses functionality in the exit path.
|The fix is often to remove the __devexit annotation of
|snd_uac2_remove() so it may be used outside an exit section.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/f_uac2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index e7cc4de93e33..d3c6cffccb72 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -463,7 +463,7 @@ snd_fail:
 	return err;
 }
 
-static int __devexit snd_uac2_remove(struct platform_device *pdev)
+static int snd_uac2_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
-- 
cgit v1.2.3


From c2ec75c25112c9e0d9053f55ba8cf0a358d4a354 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:03 +0200
Subject: usb: gadget: push all usb_composite_driver structs into __refdata

As it turns out, Sam's comment was better than I initially assumed. This
patch pushes as struct usb_composite_driver data structures into
__refdata section to avoid a section missmatch report from modpost
because the ->bind() can be marked __init. The only downside is that
modpost does not check between ->bind() and other member. However, it is
temporary.

Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c         | 2 +-
 drivers/usb/gadget/audio.c          | 2 +-
 drivers/usb/gadget/cdc2.c           | 2 +-
 drivers/usb/gadget/dbgp.c           | 2 +-
 drivers/usb/gadget/ether.c          | 2 +-
 drivers/usb/gadget/file_storage.c   | 2 +-
 drivers/usb/gadget/g_ffs.c          | 2 +-
 drivers/usb/gadget/gmidi.c          | 2 +-
 drivers/usb/gadget/hid.c            | 2 +-
 drivers/usb/gadget/mass_storage.c   | 2 +-
 drivers/usb/gadget/multi.c          | 2 +-
 drivers/usb/gadget/ncm.c            | 2 +-
 drivers/usb/gadget/nokia.c          | 2 +-
 drivers/usb/gadget/printer.c        | 2 +-
 drivers/usb/gadget/serial.c         | 2 +-
 drivers/usb/gadget/tcm_usb_gadget.c | 2 +-
 drivers/usb/gadget/webcam.c         | 2 +-
 drivers/usb/gadget/zero.c           | 2 +-
 18 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 75b8a691fd00..dc5cd51de7d4 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -232,7 +232,7 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver acm_ms_driver = {
+static __refdata struct usb_composite_driver acm_ms_driver = {
 	.name		= "g_acm_ms",
 	.dev		= &device_desc,
 	.max_speed	= USB_SPEED_SUPER,
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 98899244860e..e539490e7733 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -198,7 +198,7 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver audio_driver = {
+static __refdata struct usb_composite_driver audio_driver = {
 	.name		= "g_audio",
 	.dev		= &device_desc,
 	.strings	= audio_strings,
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 725550f06fab..00b65ac7a2ef 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -232,7 +232,7 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver cdc_driver = {
+static __refdata struct usb_composite_driver cdc_driver = {
 	.name		= "g_cdc",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 19d7bb0df75a..2d2cff3e454c 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -402,7 +402,7 @@ fail:
 	return err;
 }
 
-static struct usb_gadget_driver dbgp_driver = {
+static __refdata struct usb_gadget_driver dbgp_driver = {
 	.function = "dbgp",
 	.max_speed = USB_SPEED_HIGH,
 	.unbind = dbgp_unbind,
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index a28f6ffcd0f3..49a7dac06b1d 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -388,7 +388,7 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver eth_driver = {
+static __refdata struct usb_composite_driver eth_driver = {
 	.name		= "g_ether",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a896d73f7a93..683234bcdced 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3603,7 +3603,7 @@ static void fsg_resume(struct usb_gadget *gadget)
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_gadget_driver		fsg_driver = {
+static __refdata struct usb_gadget_driver		fsg_driver = {
 	.max_speed	= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
 	.unbind		= fsg_unbind,
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index d3ace9002a6a..d1312c404afa 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -163,7 +163,7 @@ static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
 static int gfs_do_config(struct usb_configuration *c);
 
-static struct usb_composite_driver gfs_driver = {
+static __refdata struct usb_composite_driver gfs_driver = {
 	.name		= DRIVER_NAME,
 	.dev		= &gfs_dev_desc,
 	.strings	= gfs_dev_strings,
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 681bd038b1d8..ae46f69b718a 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -184,7 +184,7 @@ static int __init midi_bind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver midi_driver = {
+static __refdata struct usb_composite_driver midi_driver = {
 	.name		= (char *) longname,
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 3493adf064f5..34e139e700b4 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -242,7 +242,7 @@ static int __devexit hidg_plat_driver_remove(struct platform_device *pdev)
 /****************************** Some noise ******************************/
 
 
-static struct usb_composite_driver hidg_driver = {
+static __refdata struct usb_composite_driver hidg_driver = {
 	.name		= "g_hid",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 1f376eba31f6..5df117e3f78d 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -156,7 +156,7 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 
 /****************************** Some noise ******************************/
 
-static struct usb_composite_driver msg_driver = {
+static __refdata struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
 	.iProduct	= DRIVER_DESC,
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index c37fb33a3d1b..7e5852a28a93 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -338,7 +338,7 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev)
 /****************************** Some noise ******************************/
 
 
-static struct usb_composite_driver multi_driver = {
+static __refdata struct usb_composite_driver multi_driver = {
 	.name		= "g_multi",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 89530034dff1..5079bf659e31 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -215,7 +215,7 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver ncm_driver = {
+static __refdata struct usb_composite_driver ncm_driver = {
 	.name		= "g_ncm",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index c7fb7723c014..936d0afc4527 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -237,7 +237,7 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver nokia_driver = {
+static __refdata struct usb_composite_driver nokia_driver = {
 	.name		= "g_nokia",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index f1f9290a2f47..0aab51766ce6 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1269,7 +1269,7 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 	return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
 }
 
-static struct usb_composite_driver printer_driver = {
+static __refdata struct usb_composite_driver printer_driver = {
 	.name           = shortname,
 	.dev            = &device_desc,
 	.strings        = dev_strings,
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 665c07422c26..7b0b6f40ed07 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -238,7 +238,7 @@ fail:
 	return status;
 }
 
-static struct usb_composite_driver gserial_driver = {
+static __refdata struct usb_composite_driver gserial_driver = {
 	.name		= "g_serial",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 5444866e13ef..28fef844a06a 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -2436,7 +2436,7 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver usbg_driver = {
+static __refdata struct usb_composite_driver usbg_driver = {
 	.name           = "g_target",
 	.dev            = &usbg_device_desc,
 	.strings        = usbg_strings,
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 120e134e805e..d946f19482e8 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -390,7 +390,7 @@ error:
  * Driver
  */
 
-static struct usb_composite_driver webcam_driver = {
+static __refdata struct usb_composite_driver webcam_driver = {
 	.name		= "g_webcam",
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 12ad516ada77..5db33cbe755b 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -334,7 +334,7 @@ static int zero_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver zero_driver = {
+static __refdata struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
-- 
cgit v1.2.3


From 03e42bd5937c4c24e411690ab165627e93c258b5 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:04 +0200
Subject: usb: gadget: move bind() callback back to struct usb_composite_driver

This partly reverts 07a18bd7 ("usb gadget: don't save bind callback in
struct usb_composite_driver") and fixes new drivers. The section missmatch
problems was solved by whitelisting structs in question via __ref.

Cc: devel@driverdev.osuosl.org
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/staging/ccg/ccg.c           | 3 ++-
 drivers/usb/gadget/acm_ms.c         | 3 ++-
 drivers/usb/gadget/audio.c          | 3 ++-
 drivers/usb/gadget/cdc2.c           | 3 ++-
 drivers/usb/gadget/composite.c      | 9 ++-------
 drivers/usb/gadget/ether.c          | 3 ++-
 drivers/usb/gadget/g_ffs.c          | 3 ++-
 drivers/usb/gadget/gmidi.c          | 3 ++-
 drivers/usb/gadget/hid.c            | 3 ++-
 drivers/usb/gadget/mass_storage.c   | 3 ++-
 drivers/usb/gadget/multi.c          | 3 ++-
 drivers/usb/gadget/ncm.c            | 3 ++-
 drivers/usb/gadget/nokia.c          | 3 ++-
 drivers/usb/gadget/printer.c        | 3 ++-
 drivers/usb/gadget/serial.c         | 3 ++-
 drivers/usb/gadget/tcm_usb_gadget.c | 3 ++-
 drivers/usb/gadget/webcam.c         | 3 ++-
 drivers/usb/gadget/zero.c           | 3 ++-
 include/linux/usb/composite.h       | 3 +--
 19 files changed, 37 insertions(+), 26 deletions(-)

(limited to 'drivers')

diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c
index 6a7aab8d9bf5..eadda5574b2a 100644
--- a/drivers/staging/ccg/ccg.c
+++ b/drivers/staging/ccg/ccg.c
@@ -1162,6 +1162,7 @@ static int ccg_usb_unbind(struct usb_composite_dev *cdev)
 static struct usb_composite_driver ccg_usb_driver = {
 	.name		= "configurable_usb",
 	.dev		= &device_desc,
+	.bind		= ccg_bind,
 	.unbind		= ccg_usb_unbind,
 	.needs_serial	= true,
 	.iManufacturer	= "Linux Foundation",
@@ -1275,7 +1276,7 @@ static int __init init(void)
 	composite_driver.setup = ccg_setup;
 	composite_driver.disconnect = ccg_disconnect;
 
-	err = usb_composite_probe(&ccg_usb_driver, ccg_bind);
+	err = usb_composite_probe(&ccg_usb_driver);
 	if (err) {
 		class_destroy(ccg_class);
 		kfree(dev);
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index dc5cd51de7d4..65a2f3cbcde3 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -237,6 +237,7 @@ static __refdata struct usb_composite_driver acm_ms_driver = {
 	.dev		= &device_desc,
 	.max_speed	= USB_SPEED_SUPER,
 	.strings	= dev_strings,
+	.bind		= acm_ms_bind,
 	.unbind		= __exit_p(acm_ms_unbind),
 };
 
@@ -246,7 +247,7 @@ MODULE_LICENSE("GPL v2");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&acm_ms_driver, acm_ms_bind);
+	return usb_composite_probe(&acm_ms_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index e539490e7733..dd339bc5b40c 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -203,12 +203,13 @@ static __refdata struct usb_composite_driver audio_driver = {
 	.dev		= &device_desc,
 	.strings	= audio_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= audio_bind,
 	.unbind		= __exit_p(audio_unbind),
 };
 
 static int __init init(void)
 {
-	return usb_composite_probe(&audio_driver, audio_bind);
+	return usb_composite_probe(&audio_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 00b65ac7a2ef..b7d984b54ca9 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -237,6 +237,7 @@ static __refdata struct usb_composite_driver cdc_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= cdc_bind,
 	.unbind		= __exit_p(cdc_unbind),
 };
 
@@ -246,7 +247,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&cdc_driver, cdc_bind);
+	return usb_composite_probe(&cdc_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 402e5bd8b3e5..071d15c44116 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1617,12 +1617,9 @@ static struct usb_gadget_driver composite_driver = {
  * while it was binding.  That would usually be done in order to wait for
  * some userspace participation.
  */
-int usb_composite_probe(struct usb_composite_driver *driver,
-			       int (*bind)(struct usb_composite_dev *cdev))
+int usb_composite_probe(struct usb_composite_driver *driver)
 {
-	if (!driver || !driver->dev || composite)
-		return -EINVAL;
-	if (!bind && !driver->bind)
+	if (!driver || !driver->dev || composite || !driver->bind)
 		return -EINVAL;
 
 	if (!driver->name)
@@ -1633,8 +1630,6 @@ int usb_composite_probe(struct usb_composite_driver *driver,
 	composite_driver.driver.name = driver->name;
 	composite_driver.max_speed = driver->max_speed;
 	composite = driver;
-	if (!driver->bind)
-		driver->bind = bind;
 
 	return usb_gadget_probe_driver(&composite_driver, composite_bind);
 }
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 49a7dac06b1d..4580ec09cc53 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -393,6 +393,7 @@ static __refdata struct usb_composite_driver eth_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= eth_bind,
 	.unbind		= __exit_p(eth_unbind),
 };
 
@@ -402,7 +403,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&eth_driver, eth_bind);
+	return usb_composite_probe(&eth_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index d1312c404afa..da9809f55cb5 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -168,6 +168,7 @@ static __refdata struct usb_composite_driver gfs_driver = {
 	.dev		= &gfs_dev_desc,
 	.strings	= gfs_dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gfs_bind,
 	.unbind		= gfs_unbind,
 	.iProduct	= DRIVER_DESC,
 };
@@ -268,7 +269,7 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
 	}
 	gfs_registered = true;
 
-	ret = usb_composite_probe(&gfs_driver, gfs_bind);
+	ret = usb_composite_probe(&gfs_driver);
 	if (unlikely(ret < 0))
 		gfs_registered = false;
 
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index ae46f69b718a..1e3cd378a2d7 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -189,12 +189,13 @@ static __refdata struct usb_composite_driver midi_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= midi_bind,
 	.unbind		= __exit_p(midi_unbind),
 };
 
 static int __init midi_init(void)
 {
-	return usb_composite_probe(&midi_driver, midi_bind);
+	return usb_composite_probe(&midi_driver);
 }
 module_init(midi_init);
 
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 34e139e700b4..8502e56d73bc 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -247,6 +247,7 @@ static __refdata struct usb_composite_driver hidg_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= hid_bind,
 	.unbind		= __exit_p(hid_unbind),
 };
 
@@ -272,7 +273,7 @@ static int __init hidg_init(void)
 	if (status < 0)
 		return status;
 
-	status = usb_composite_probe(&hidg_driver, hid_bind);
+	status = usb_composite_probe(&hidg_driver);
 	if (status < 0)
 		platform_driver_unregister(&hidg_plat_driver);
 
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 5df117e3f78d..480edbc368e5 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -162,6 +162,7 @@ static __refdata struct usb_composite_driver msg_driver = {
 	.iProduct	= DRIVER_DESC,
 	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
+	.bind		= msg_bind,
 };
 
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -170,7 +171,7 @@ MODULE_LICENSE("GPL");
 
 static int __init msg_init(void)
 {
-	return usb_composite_probe(&msg_driver, msg_bind);
+	return usb_composite_probe(&msg_driver);
 }
 module_init(msg_init);
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 7e5852a28a93..13db7ccb9571 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -343,6 +343,7 @@ static __refdata struct usb_composite_driver multi_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= multi_bind,
 	.unbind		= __exit_p(multi_unbind),
 	.iProduct	= DRIVER_DESC,
 	.needs_serial	= 1,
@@ -351,7 +352,7 @@ static __refdata struct usb_composite_driver multi_driver = {
 
 static int __init multi_init(void)
 {
-	return usb_composite_probe(&multi_driver, multi_bind);
+	return usb_composite_probe(&multi_driver);
 }
 module_init(multi_init);
 
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 5079bf659e31..9a20057896cd 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -220,6 +220,7 @@ static __refdata struct usb_composite_driver ncm_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gncm_bind,
 	.unbind		= __exit_p(gncm_unbind),
 };
 
@@ -229,7 +230,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&ncm_driver, gncm_bind);
+	return usb_composite_probe(&ncm_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 936d0afc4527..a5b5e7162fef 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -242,12 +242,13 @@ static __refdata struct usb_composite_driver nokia_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= nokia_bind,
 	.unbind		= __exit_p(nokia_unbind),
 };
 
 static int __init nokia_init(void)
 {
-	return usb_composite_probe(&nokia_driver, nokia_bind);
+	return usb_composite_probe(&nokia_driver);
 }
 module_init(nokia_init);
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 0aab51766ce6..33c0c07493e8 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1274,6 +1274,7 @@ static __refdata struct usb_composite_driver printer_driver = {
 	.dev            = &device_desc,
 	.strings        = dev_strings,
 	.max_speed      = USB_SPEED_HIGH,
+	.bind		= printer_bind,
 	.unbind		= printer_unbind,
 };
 
@@ -1297,7 +1298,7 @@ init(void)
 		return status;
 	}
 
-	status = usb_composite_probe(&printer_driver, printer_bind);
+	status = usb_composite_probe(&printer_driver);
 	if (status) {
 		class_destroy(usb_gadget_class);
 		unregister_chrdev_region(g_printer_devno, 1);
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 7b0b6f40ed07..ea3f8e9344ae 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -243,6 +243,7 @@ static __refdata struct usb_composite_driver gserial_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= gs_bind,
 };
 
 static int __init init(void)
@@ -271,7 +272,7 @@ static int __init init(void)
 	}
 	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
 
-	return usb_composite_probe(&gserial_driver, gs_bind);
+	return usb_composite_probe(&gserial_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 28fef844a06a..35ca09af9b4a 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -2441,12 +2441,13 @@ static __refdata struct usb_composite_driver usbg_driver = {
 	.dev            = &usbg_device_desc,
 	.strings        = usbg_strings,
 	.max_speed      = USB_SPEED_SUPER,
+	.bind		= usb_target_bind,
 	.unbind         = guas_unbind,
 };
 
 static int usbg_attach(struct usbg_tpg *tpg)
 {
-	return usb_composite_probe(&usbg_driver, usb_target_bind);
+	return usb_composite_probe(&usbg_driver);
 }
 
 static void usbg_detach(struct usbg_tpg *tpg)
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index d946f19482e8..2a617c3f5a40 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -395,13 +395,14 @@ static __refdata struct usb_composite_driver webcam_driver = {
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= webcam_bind,
 	.unbind		= webcam_unbind,
 };
 
 static int __init
 webcam_init(void)
 {
-	return usb_composite_probe(&webcam_driver, webcam_bind);
+	return usb_composite_probe(&webcam_driver);
 }
 
 static void __exit
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 5db33cbe755b..90df613cccc0 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -339,6 +339,7 @@ static __refdata struct usb_composite_driver zero_driver = {
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= zero_bind,
 	.unbind		= zero_unbind,
 	.suspend	= zero_suspend,
 	.resume		= zero_resume,
@@ -349,7 +350,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&zero_driver, zero_bind);
+	return usb_composite_probe(&zero_driver);
 }
 module_init(init);
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3153f73ae083..19a5adf18bf4 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -305,8 +305,7 @@ struct usb_composite_driver {
 	void			(*resume)(struct usb_composite_dev *);
 };
 
-extern int usb_composite_probe(struct usb_composite_driver *driver,
-			       int (*bind)(struct usb_composite_dev *cdev));
+extern int usb_composite_probe(struct usb_composite_driver *driver);
 extern void usb_composite_unregister(struct usb_composite_driver *driver);
 extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
 
-- 
cgit v1.2.3


From 93952956c7078eb41058c5ccc5b34ae6cf59bb64 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:05 +0200
Subject: usb: gadget: move bind() callback back to struct usb_gadget_driver

This partly reverts 07a18bd7 ("usb gadget: don't save bind callback in
struct usb_composite_driver") and fixes new drivers. The section missmatch
problems was solved by whitelisting bind callback in modpost.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c    | 3 ++-
 drivers/usb/gadget/dbgp.c         | 3 ++-
 drivers/usb/gadget/file_storage.c | 4 +++-
 drivers/usb/gadget/inode.c        | 7 +++++--
 drivers/usb/gadget/udc-core.c     | 9 ++++-----
 include/linux/usb/gadget.h        | 6 +++---
 6 files changed, 19 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 071d15c44116..2a345f28b9ae 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1585,6 +1585,7 @@ composite_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver composite_driver = {
+	.bind		= composite_bind,
 	.unbind		= composite_unbind,
 
 	.setup		= composite_setup,
@@ -1631,7 +1632,7 @@ int usb_composite_probe(struct usb_composite_driver *driver)
 	composite_driver.max_speed = driver->max_speed;
 	composite = driver;
 
-	return usb_gadget_probe_driver(&composite_driver, composite_bind);
+	return usb_gadget_probe_driver(&composite_driver);
 }
 
 /**
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 2d2cff3e454c..df9a0104bdf2 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -405,6 +405,7 @@ fail:
 static __refdata struct usb_gadget_driver dbgp_driver = {
 	.function = "dbgp",
 	.max_speed = USB_SPEED_HIGH,
+	.bind = dbgp_bind,
 	.unbind = dbgp_unbind,
 	.setup = dbgp_setup,
 	.disconnect = dbgp_disconnect,
@@ -416,7 +417,7 @@ static __refdata struct usb_gadget_driver dbgp_driver = {
 
 static int __init dbgp_init(void)
 {
-	return usb_gadget_probe_driver(&dbgp_driver, dbgp_bind);
+	return usb_gadget_probe_driver(&dbgp_driver);
 }
 
 static void __exit dbgp_exit(void)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 683234bcdced..ce186fa7e7b2 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3606,6 +3606,7 @@ static void fsg_resume(struct usb_gadget *gadget)
 static __refdata struct usb_gadget_driver		fsg_driver = {
 	.max_speed	= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
+	.bind		= fsg_bind,
 	.unbind		= fsg_unbind,
 	.disconnect	= fsg_disconnect,
 	.setup		= fsg_setup,
@@ -3653,7 +3654,8 @@ static int __init fsg_init(void)
 	if ((rc = fsg_alloc()) != 0)
 		return rc;
 	fsg = the_fsg;
-	if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
+	rc = usb_gadget_probe_driver(&fsg_driver);
+	if (rc != 0)
 		kref_put(&fsg->ref, fsg_release);
 	return rc;
 }
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index ae13a106fb96..2521804ba4ee 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1758,6 +1758,7 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 
 static struct usb_gadget_driver gadgetfs_driver = {
 	.function	= (char *) driver_desc,
+	.bind		= gadgetfs_bind,
 	.unbind		= gadgetfs_unbind,
 	.setup		= gadgetfs_setup,
 	.disconnect	= gadgetfs_disconnect,
@@ -1780,6 +1781,7 @@ static int gadgetfs_probe (struct usb_gadget *gadget)
 
 static struct usb_gadget_driver probe_driver = {
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gadgetfs_probe,
 	.unbind		= gadgetfs_nop,
 	.setup		= (void *)gadgetfs_nop,
 	.disconnect	= gadgetfs_nop,
@@ -1893,7 +1895,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		gadgetfs_driver.max_speed = USB_SPEED_HIGH;
 	else
 		gadgetfs_driver.max_speed = USB_SPEED_FULL;
-	value = usb_gadget_probe_driver(&gadgetfs_driver, gadgetfs_bind);
+
+	value = usb_gadget_probe_driver(&gadgetfs_driver);
 	if (value != 0) {
 		kfree (dev->buf);
 		dev->buf = NULL;
@@ -2032,7 +2035,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
 		return -ESRCH;
 
 	/* fake probe to determine $CHIP */
-	(void) usb_gadget_probe_driver(&probe_driver, gadgetfs_probe);
+	usb_gadget_probe_driver(&probe_driver);
 	if (!CHIP)
 		return -ENODEV;
 
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index bae243c23141..85e1e2fdd403 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -311,13 +311,12 @@ EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
 
 /* ------------------------------------------------------------------------- */
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 {
 	struct usb_udc		*udc = NULL;
 	int			ret;
 
-	if (!driver || !bind || !driver->setup)
+	if (!driver || !driver->bind || !driver->setup)
 		return -EINVAL;
 
 	mutex_lock(&udc_lock);
@@ -339,7 +338,7 @@ found:
 	udc->dev.driver = &driver->driver;
 
 	if (udc_is_newstyle(udc)) {
-		ret = bind(udc->gadget);
+		ret = driver->bind(udc->gadget);
 		if (ret)
 			goto err1;
 		ret = usb_gadget_udc_start(udc->gadget, driver);
@@ -350,7 +349,7 @@ found:
 		usb_gadget_connect(udc->gadget);
 	} else {
 
-		ret = usb_gadget_start(udc->gadget, driver, bind);
+		ret = usb_gadget_start(udc->gadget, driver, driver->bind);
 		if (ret)
 			goto err1;
 
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d05b220f0fd3..9eb4e712168f 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -766,6 +766,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
  *	when the host is disconnected.  May be called in_interrupt; this
  *	may not sleep.  Some devices can't detect disconnect, so this might
  *	not be called except as part of controller shutdown.
+ * @bind: the driver's bind callback
  * @unbind: Invoked when the driver is unbound from a gadget,
  *	usually from rmmod (after a disconnect is reported).
  *	Called in a context that permits sleeping.
@@ -820,6 +821,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
 struct usb_gadget_driver {
 	char			*function;
 	enum usb_device_speed	max_speed;
+	int			(*bind)(struct usb_gadget *gadget);
 	void			(*unbind)(struct usb_gadget *);
 	int			(*setup)(struct usb_gadget *,
 					const struct usb_ctrlrequest *);
@@ -845,7 +847,6 @@ struct usb_gadget_driver {
 /**
  * usb_gadget_probe_driver - probe a gadget driver
  * @driver: the driver being registered
- * @bind: the driver's bind callback
  * Context: can sleep
  *
  * Call this in your gadget driver's module initialization function,
@@ -854,8 +855,7 @@ struct usb_gadget_driver {
  * registration call returns.  It's expected that the @bind() function will
  * be in init sections.
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
 
 /**
  * usb_gadget_unregister_driver - unregister a gadget driver
-- 
cgit v1.2.3


From e220ff75db3c1195814c2ad5ada11f71b011d000 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:06 +0200
Subject: staging: ccg: include all sourced files

This Android gadget includes a bunch of .c files. Fixing normal gadgets
is not the real problem but this gadget is not always fixable since the
problem here are fundumential / design.

*I* wanted to get this removed but other people want to keep it even
though there were reports that Android itself is not using it. Some
poeple think that it is better to have this instead of nothing and other
argue that they need sdb and mass storage gadget. The sdb function is
not provided by ccg so I don't see the point of this. I don't see any
logical reasoning behind it and I decided that it is time for retreat.

This patch brings all dependencies of ccg into staging so I can do
whatever I want in drivers/usb/gadget without breaking ccg.

Cc: devel@driverdev.osuosl.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/staging/ccg/Makefile         |    2 -
 drivers/staging/ccg/ccg.c            |   26 +-
 drivers/staging/ccg/composite.c      | 1687 ++++++++++++++++++
 drivers/staging/ccg/composite.h      |  395 +++++
 drivers/staging/ccg/config.c         |  158 ++
 drivers/staging/ccg/epautoconf.c     |  393 +++++
 drivers/staging/ccg/f_acm.c          |  814 +++++++++
 drivers/staging/ccg/f_fs.c           | 2455 ++++++++++++++++++++++++++
 drivers/staging/ccg/f_mass_storage.c | 3135 ++++++++++++++++++++++++++++++++++
 drivers/staging/ccg/f_rndis.c        |  918 ++++++++++
 drivers/staging/ccg/gadget_chips.h   |  150 ++
 drivers/staging/ccg/ndis.h           |   47 +
 drivers/staging/ccg/rndis.c          | 1175 +++++++++++++
 drivers/staging/ccg/rndis.h          |  222 +++
 drivers/staging/ccg/storage_common.c |  893 ++++++++++
 drivers/staging/ccg/u_ether.c        |  986 +++++++++++
 drivers/staging/ccg/u_ether.h        |  154 ++
 drivers/staging/ccg/u_serial.c       | 1341 +++++++++++++++
 drivers/staging/ccg/u_serial.h       |   65 +
 drivers/staging/ccg/usbstring.c      |   71 +
 20 files changed, 15072 insertions(+), 15 deletions(-)
 create mode 100644 drivers/staging/ccg/composite.c
 create mode 100644 drivers/staging/ccg/composite.h
 create mode 100644 drivers/staging/ccg/config.c
 create mode 100644 drivers/staging/ccg/epautoconf.c
 create mode 100644 drivers/staging/ccg/f_acm.c
 create mode 100644 drivers/staging/ccg/f_fs.c
 create mode 100644 drivers/staging/ccg/f_mass_storage.c
 create mode 100644 drivers/staging/ccg/f_rndis.c
 create mode 100644 drivers/staging/ccg/gadget_chips.h
 create mode 100644 drivers/staging/ccg/ndis.h
 create mode 100644 drivers/staging/ccg/rndis.c
 create mode 100644 drivers/staging/ccg/rndis.h
 create mode 100644 drivers/staging/ccg/storage_common.c
 create mode 100644 drivers/staging/ccg/u_ether.c
 create mode 100644 drivers/staging/ccg/u_ether.h
 create mode 100644 drivers/staging/ccg/u_serial.c
 create mode 100644 drivers/staging/ccg/u_serial.h
 create mode 100644 drivers/staging/ccg/usbstring.c

(limited to 'drivers')

diff --git a/drivers/staging/ccg/Makefile b/drivers/staging/ccg/Makefile
index 693da637a6d8..814fa9de5f57 100644
--- a/drivers/staging/ccg/Makefile
+++ b/drivers/staging/ccg/Makefile
@@ -1,4 +1,2 @@
 g_ccg-y				:= ccg.o
-ccflags-y			+= -Idrivers/usb/gadget
-
 obj-$(CONFIG_USB_G_CCG)		+= g_ccg.o
diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c
index eadda5574b2a..80feb95e27dc 100644
--- a/drivers/staging/ccg/ccg.c
+++ b/drivers/staging/ccg/ccg.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 
 #include <linux/usb/ch9.h>
-#include <linux/usb/composite.h>
+#include "composite.h"
 #include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
@@ -44,19 +44,19 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "../../usb/gadget/usbstring.c"
-#include "../../usb/gadget/config.c"
-#include "../../usb/gadget/epautoconf.c"
-#include "../../usb/gadget/composite.c"
-
-#include "../../usb/gadget/f_mass_storage.c"
-#include "../../usb/gadget/u_serial.c"
-#include "../../usb/gadget/f_acm.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+#include "composite.c"
+
+#include "f_mass_storage.c"
+#include "u_serial.c"
+#include "f_acm.c"
 #define USB_ETH_RNDIS y
-#include "../../usb/gadget/f_rndis.c"
-#include "../../usb/gadget/rndis.c"
-#include "../../usb/gadget/u_ether.c"
-#include "../../usb/gadget/f_fs.c"
+#include "f_rndis.c"
+#include "rndis.c"
+#include "u_ether.c"
+#include "f_fs.c"
 
 MODULE_AUTHOR("Mike Lockwood, Andrzej Pietrasiewicz");
 MODULE_DESCRIPTION("Configurable Composite USB Gadget");
diff --git a/drivers/staging/ccg/composite.c b/drivers/staging/ccg/composite.c
new file mode 100644
index 000000000000..2a345f28b9ae
--- /dev/null
+++ b/drivers/staging/ccg/composite.c
@@ -0,0 +1,1687 @@
+/*
+ * composite.c - infrastructure for Composite USB Gadgets
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/utsname.h>
+
+#include <linux/usb/composite.h>
+#include <asm/unaligned.h>
+
+/*
+ * The code in this file is utility code, used to build a gadget driver
+ * from one or more "function" drivers, one or more "configuration"
+ * objects, and a "usb_composite_driver" by gluing them together along
+ * with the relevant device-wide data.
+ */
+
+/* big enough to hold our biggest descriptor */
+#define USB_BUFSIZ	1024
+
+static struct usb_composite_driver *composite;
+
+/* Some systems will need runtime overrides for the  product identifiers
+ * published in the device descriptor, either numbers or strings or both.
+ * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+static ushort idVendor;
+module_param(idVendor, ushort, 0644);
+MODULE_PARM_DESC(idVendor, "USB Vendor ID");
+
+static ushort idProduct;
+module_param(idProduct, ushort, 0644);
+MODULE_PARM_DESC(idProduct, "USB Product ID");
+
+static ushort bcdDevice;
+module_param(bcdDevice, ushort, 0644);
+MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
+
+static char *iManufacturer;
+module_param(iManufacturer, charp, 0644);
+MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
+
+static char *iProduct;
+module_param(iProduct, charp, 0644);
+MODULE_PARM_DESC(iProduct, "USB Product string");
+
+static char *iSerialNumber;
+module_param(iSerialNumber, charp, 0644);
+MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
+
+static char composite_manufacturer[50];
+
+/*-------------------------------------------------------------------------*/
+/**
+ * next_ep_desc() - advance to the next EP descriptor
+ * @t: currect pointer within descriptor array
+ *
+ * Return: next EP descriptor or NULL
+ *
+ * Iterate over @t until either EP descriptor found or
+ * NULL (that indicates end of list) encountered
+ */
+static struct usb_descriptor_header**
+next_ep_desc(struct usb_descriptor_header **t)
+{
+	for (; *t; t++) {
+		if ((*t)->bDescriptorType == USB_DT_ENDPOINT)
+			return t;
+	}
+	return NULL;
+}
+
+/*
+ * for_each_ep_desc()- iterate over endpoint descriptors in the
+ *		descriptors list
+ * @start:	pointer within descriptor array.
+ * @ep_desc:	endpoint descriptor to use as the loop cursor
+ */
+#define for_each_ep_desc(start, ep_desc) \
+	for (ep_desc = next_ep_desc(start); \
+	      ep_desc; ep_desc = next_ep_desc(ep_desc+1))
+
+/**
+ * config_ep_by_speed() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed(struct usb_gadget *g,
+			struct usb_function *f,
+			struct usb_ep *_ep)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(g);
+	struct usb_endpoint_descriptor *chosen_desc = NULL;
+	struct usb_descriptor_header **speed_desc = NULL;
+
+	struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+	int want_comp_desc = 0;
+
+	struct usb_descriptor_header **d_spd; /* cursor for speed desc */
+
+	if (!g || !f || !_ep)
+		return -EIO;
+
+	/* select desired speed */
+	switch (g->speed) {
+	case USB_SPEED_SUPER:
+		if (gadget_is_superspeed(g)) {
+			speed_desc = f->ss_descriptors;
+			want_comp_desc = 1;
+			break;
+		}
+		/* else: Fall trough */
+	case USB_SPEED_HIGH:
+		if (gadget_is_dualspeed(g)) {
+			speed_desc = f->hs_descriptors;
+			break;
+		}
+		/* else: fall through */
+	default:
+		speed_desc = f->descriptors;
+	}
+	/* find descriptors */
+	for_each_ep_desc(speed_desc, d_spd) {
+		chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
+		if (chosen_desc->bEndpointAddress == _ep->address)
+			goto ep_found;
+	}
+	return -EIO;
+
+ep_found:
+	/* commit results */
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
+	_ep->desc = chosen_desc;
+	_ep->comp_desc = NULL;
+	_ep->maxburst = 0;
+	_ep->mult = 0;
+	if (!want_comp_desc)
+		return 0;
+
+	/*
+	 * Companion descriptor should follow EP descriptor
+	 * USB 3.0 spec, #9.6.7
+	 */
+	comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
+	if (!comp_desc ||
+	    (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
+		return -EIO;
+	_ep->comp_desc = comp_desc;
+	if (g->speed == USB_SPEED_SUPER) {
+		switch (usb_endpoint_type(_ep->desc)) {
+		case USB_ENDPOINT_XFER_ISOC:
+			/* mult: bits 1:0 of bmAttributes */
+			_ep->mult = comp_desc->bmAttributes & 0x3;
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			_ep->maxburst = comp_desc->bMaxBurst + 1;
+			break;
+		default:
+			if (comp_desc->bMaxBurst != 0)
+				ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+			_ep->maxburst = 1;
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * usb_add_function() - add a function to a configuration
+ * @config: the configuration
+ * @function: the function being added
+ * Context: single threaded during gadget setup
+ *
+ * After initialization, each configuration must have one or more
+ * functions added to it.  Adding a function involves calling its @bind()
+ * method to allocate resources such as interface and string identifiers
+ * and endpoints.
+ *
+ * This function returns the value of the function's bind(), which is
+ * zero for success else a negative errno value.
+ */
+int usb_add_function(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	int	value = -EINVAL;
+
+	DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n",
+			function->name, function,
+			config->label, config);
+
+	if (!function->set_alt || !function->disable)
+		goto done;
+
+	function->config = config;
+	list_add_tail(&function->list, &config->functions);
+
+	/* REVISIT *require* function->bind? */
+	if (function->bind) {
+		value = function->bind(config, function);
+		if (value < 0) {
+			list_del(&function->list);
+			function->config = NULL;
+		}
+	} else
+		value = 0;
+
+	/* We allow configurations that don't work at both speeds.
+	 * If we run into a lowspeed Linux system, treat it the same
+	 * as full speed ... it's the function drivers that will need
+	 * to avoid bulk and ISO transfers.
+	 */
+	if (!config->fullspeed && function->descriptors)
+		config->fullspeed = true;
+	if (!config->highspeed && function->hs_descriptors)
+		config->highspeed = true;
+	if (!config->superspeed && function->ss_descriptors)
+		config->superspeed = true;
+
+done:
+	if (value)
+		DBG(config->cdev, "adding '%s'/%p --> %d\n",
+				function->name, function, value);
+	return value;
+}
+
+/**
+ * usb_function_deactivate - prevent function and gadget enumeration
+ * @function: the function that isn't yet ready to respond
+ *
+ * Blocks response of the gadget driver to host enumeration by
+ * preventing the data line pullup from being activated.  This is
+ * normally called during @bind() processing to change from the
+ * initial "ready to respond" state, or when a required resource
+ * becomes available.
+ *
+ * For example, drivers that serve as a passthrough to a userspace
+ * daemon can block enumeration unless that daemon (such as an OBEX,
+ * MTP, or print server) is ready to handle host requests.
+ *
+ * Not all systems support software control of their USB peripheral
+ * data pullups.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_deactivate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
+	int				status = 0;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->deactivations == 0)
+		status = usb_gadget_disconnect(cdev->gadget);
+	if (status == 0)
+		cdev->deactivations++;
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+	return status;
+}
+
+/**
+ * usb_function_activate - allow function and gadget enumeration
+ * @function: function on which usb_function_activate() was called
+ *
+ * Reverses effect of usb_function_deactivate().  If no more functions
+ * are delaying their activation, the gadget driver will respond to
+ * host enumeration procedures.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_activate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
+	int				status = 0;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (WARN_ON(cdev->deactivations == 0))
+		status = -EINVAL;
+	else {
+		cdev->deactivations--;
+		if (cdev->deactivations == 0)
+			status = usb_gadget_connect(cdev->gadget);
+	}
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+	return status;
+}
+
+/**
+ * usb_interface_id() - allocate an unused interface ID
+ * @config: configuration associated with the interface
+ * @function: function handling the interface
+ * Context: single threaded during gadget setup
+ *
+ * usb_interface_id() is called from usb_function.bind() callbacks to
+ * allocate new interface IDs.  The function driver will then store that
+ * ID in interface, association, CDC union, and other descriptors.  It
+ * will also handle any control requests targeted at that interface,
+ * particularly changing its altsetting via set_alt().  There may
+ * also be class-specific or vendor-specific requests to handle.
+ *
+ * All interface identifier should be allocated using this routine, to
+ * ensure that for example different functions don't wrongly assign
+ * different meanings to the same identifier.  Note that since interface
+ * identifiers are configuration-specific, functions used in more than
+ * one configuration (or more than once in a given configuration) need
+ * multiple versions of the relevant descriptors.
+ *
+ * Returns the interface ID which was allocated; or -ENODEV if no
+ * more interface IDs can be allocated.
+ */
+int usb_interface_id(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	unsigned id = config->next_interface_id;
+
+	if (id < MAX_CONFIG_INTERFACES) {
+		config->interface[id] = function;
+		config->next_interface_id = id + 1;
+		return id;
+	}
+	return -ENODEV;
+}
+
+static int config_buf(struct usb_configuration *config,
+		enum usb_device_speed speed, void *buf, u8 type)
+{
+	struct usb_config_descriptor	*c = buf;
+	void				*next = buf + USB_DT_CONFIG_SIZE;
+	int				len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+	struct usb_function		*f;
+	int				status;
+
+	/* write the config descriptor */
+	c = buf;
+	c->bLength = USB_DT_CONFIG_SIZE;
+	c->bDescriptorType = type;
+	/* wTotalLength is written later */
+	c->bNumInterfaces = config->next_interface_id;
+	c->bConfigurationValue = config->bConfigurationValue;
+	c->iConfiguration = config->iConfiguration;
+	c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
+	c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
+
+	/* There may be e.g. OTG descriptors */
+	if (config->descriptors) {
+		status = usb_descriptor_fillbuf(next, len,
+				config->descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	/* add each function's descriptors */
+	list_for_each_entry(f, &config->functions, list) {
+		struct usb_descriptor_header **descriptors;
+
+		switch (speed) {
+		case USB_SPEED_SUPER:
+			descriptors = f->ss_descriptors;
+			break;
+		case USB_SPEED_HIGH:
+			descriptors = f->hs_descriptors;
+			break;
+		default:
+			descriptors = f->descriptors;
+		}
+
+		if (!descriptors)
+			continue;
+		status = usb_descriptor_fillbuf(next, len,
+			(const struct usb_descriptor_header **) descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	len = next - buf;
+	c->wTotalLength = cpu_to_le16(len);
+	return len;
+}
+
+static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
+{
+	struct usb_gadget		*gadget = cdev->gadget;
+	struct usb_configuration	*c;
+	u8				type = w_value >> 8;
+	enum usb_device_speed		speed = USB_SPEED_UNKNOWN;
+
+	if (gadget->speed == USB_SPEED_SUPER)
+		speed = gadget->speed;
+	else if (gadget_is_dualspeed(gadget)) {
+		int	hs = 0;
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (type == USB_DT_OTHER_SPEED_CONFIG)
+			hs = !hs;
+		if (hs)
+			speed = USB_SPEED_HIGH;
+
+	}
+
+	/* This is a lookup by config *INDEX* */
+	w_value &= 0xff;
+	list_for_each_entry(c, &cdev->configs, list) {
+		/* ignore configs that won't work at this speed */
+		switch (speed) {
+		case USB_SPEED_SUPER:
+			if (!c->superspeed)
+				continue;
+			break;
+		case USB_SPEED_HIGH:
+			if (!c->highspeed)
+				continue;
+			break;
+		default:
+			if (!c->fullspeed)
+				continue;
+		}
+
+		if (w_value == 0)
+			return config_buf(c, speed, cdev->req->buf, type);
+		w_value--;
+	}
+	return -EINVAL;
+}
+
+static int count_configs(struct usb_composite_dev *cdev, unsigned type)
+{
+	struct usb_gadget		*gadget = cdev->gadget;
+	struct usb_configuration	*c;
+	unsigned			count = 0;
+	int				hs = 0;
+	int				ss = 0;
+
+	if (gadget_is_dualspeed(gadget)) {
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (gadget->speed == USB_SPEED_SUPER)
+			ss = 1;
+		if (type == USB_DT_DEVICE_QUALIFIER)
+			hs = !hs;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		/* ignore configs that won't work at this speed */
+		if (ss) {
+			if (!c->superspeed)
+				continue;
+		} else if (hs) {
+			if (!c->highspeed)
+				continue;
+		} else {
+			if (!c->fullspeed)
+				continue;
+		}
+		count++;
+	}
+	return count;
+}
+
+/**
+ * bos_desc() - prepares the BOS descriptor.
+ * @cdev: pointer to usb_composite device to generate the bos
+ *	descriptor for
+ *
+ * This function generates the BOS (Binary Device Object)
+ * descriptor and its device capabilities descriptors. The BOS
+ * descriptor should be supported by a SuperSpeed device.
+ */
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+	struct usb_ext_cap_descriptor	*usb_ext;
+	struct usb_ss_cap_descriptor	*ss_cap;
+	struct usb_dcd_config_params	dcd_config_params;
+	struct usb_bos_descriptor	*bos = cdev->req->buf;
+
+	bos->bLength = USB_DT_BOS_SIZE;
+	bos->bDescriptorType = USB_DT_BOS;
+
+	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+	bos->bNumDeviceCaps = 0;
+
+	/*
+	 * A SuperSpeed device shall include the USB2.0 extension descriptor
+	 * and shall support LPM when operating in USB2.0 HS mode.
+	 */
+	usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+
+	/*
+	 * The Superspeed USB Capability descriptor shall be implemented by all
+	 * SuperSpeed devices.
+	 */
+	ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+	ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+	ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+	ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+	ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
+				USB_FULL_SPEED_OPERATION |
+				USB_HIGH_SPEED_OPERATION |
+				USB_5GBPS_OPERATION);
+	ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+
+	/* Get Controller configuration */
+	if (cdev->gadget->ops->get_config_params)
+		cdev->gadget->ops->get_config_params(&dcd_config_params);
+	else {
+		dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU2DevExitLat =
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+	}
+	ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
+	ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+
+	return le16_to_cpu(bos->wTotalLength);
+}
+
+static void device_qual(struct usb_composite_dev *cdev)
+{
+	struct usb_qualifier_descriptor	*qual = cdev->req->buf;
+
+	qual->bLength = sizeof(*qual);
+	qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+	/* POLICY: same bcdUSB and device type info at both speeds */
+	qual->bcdUSB = cdev->desc.bcdUSB;
+	qual->bDeviceClass = cdev->desc.bDeviceClass;
+	qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
+	qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
+	/* ASSUME same EP0 fifo size at both speeds */
+	qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
+	qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
+	qual->bRESERVED = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void reset_config(struct usb_composite_dev *cdev)
+{
+	struct usb_function		*f;
+
+	DBG(cdev, "reset config\n");
+
+	list_for_each_entry(f, &cdev->config->functions, list) {
+		if (f->disable)
+			f->disable(f);
+
+		bitmap_zero(f->endpoints, 32);
+	}
+	cdev->config = NULL;
+}
+
+static int set_config(struct usb_composite_dev *cdev,
+		const struct usb_ctrlrequest *ctrl, unsigned number)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	struct usb_configuration *c = NULL;
+	int			result = -EINVAL;
+	unsigned		power = gadget_is_otg(gadget) ? 8 : 100;
+	int			tmp;
+
+	if (number) {
+		list_for_each_entry(c, &cdev->configs, list) {
+			if (c->bConfigurationValue == number) {
+				/*
+				 * We disable the FDs of the previous
+				 * configuration only if the new configuration
+				 * is a valid one
+				 */
+				if (cdev->config)
+					reset_config(cdev);
+				result = 0;
+				break;
+			}
+		}
+		if (result < 0)
+			goto done;
+	} else { /* Zero configuration value - need to reset the config */
+		if (cdev->config)
+			reset_config(cdev);
+		result = 0;
+	}
+
+	INFO(cdev, "%s config #%d: %s\n",
+	     usb_speed_string(gadget->speed),
+	     number, c ? c->label : "unconfigured");
+
+	if (!c)
+		goto done;
+
+	cdev->config = c;
+
+	/* Initialize all interfaces by setting them to altsetting zero. */
+	for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
+		struct usb_function	*f = c->interface[tmp];
+		struct usb_descriptor_header **descriptors;
+
+		if (!f)
+			break;
+
+		/*
+		 * Record which endpoints are used by the function. This is used
+		 * to dispatch control requests targeted at that endpoint to the
+		 * function's setup callback instead of the current
+		 * configuration's setup callback.
+		 */
+		switch (gadget->speed) {
+		case USB_SPEED_SUPER:
+			descriptors = f->ss_descriptors;
+			break;
+		case USB_SPEED_HIGH:
+			descriptors = f->hs_descriptors;
+			break;
+		default:
+			descriptors = f->descriptors;
+		}
+
+		for (; *descriptors; ++descriptors) {
+			struct usb_endpoint_descriptor *ep;
+			int addr;
+
+			if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
+				continue;
+
+			ep = (struct usb_endpoint_descriptor *)*descriptors;
+			addr = ((ep->bEndpointAddress & 0x80) >> 3)
+			     |  (ep->bEndpointAddress & 0x0f);
+			set_bit(addr, f->endpoints);
+		}
+
+		result = f->set_alt(f, tmp, 0);
+		if (result < 0) {
+			DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
+					tmp, f->name, f, result);
+
+			reset_config(cdev);
+			goto done;
+		}
+
+		if (result == USB_GADGET_DELAYED_STATUS) {
+			DBG(cdev,
+			 "%s: interface %d (%s) requested delayed status\n",
+					__func__, tmp, f->name);
+			cdev->delayed_status++;
+			DBG(cdev, "delayed_status count %d\n",
+					cdev->delayed_status);
+		}
+	}
+
+	/* when we return, be sure our power usage is valid */
+	power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
+done:
+	usb_gadget_vbus_draw(gadget, power);
+	if (result >= 0 && cdev->delayed_status)
+		result = USB_GADGET_DELAYED_STATUS;
+	return result;
+}
+
+/**
+ * usb_add_config() - add a configuration to a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration, with bConfigurationValue assigned
+ * @bind: the configuration's bind function
+ * Context: single threaded during gadget setup
+ *
+ * One of the main tasks of a composite @bind() routine is to
+ * add each of the configurations it supports, using this routine.
+ *
+ * This function returns the value of the configuration's @bind(), which
+ * is zero for success else a negative errno value.  Binding configurations
+ * assigns global resources including string IDs, and per-configuration
+ * resources such as interface IDs and endpoints.
+ */
+int usb_add_config(struct usb_composite_dev *cdev,
+		struct usb_configuration *config,
+		int (*bind)(struct usb_configuration *))
+{
+	int				status = -EINVAL;
+	struct usb_configuration	*c;
+
+	DBG(cdev, "adding config #%u '%s'/%p\n",
+			config->bConfigurationValue,
+			config->label, config);
+
+	if (!config->bConfigurationValue || !bind)
+		goto done;
+
+	/* Prevent duplicate configuration identifiers */
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->bConfigurationValue == config->bConfigurationValue) {
+			status = -EBUSY;
+			goto done;
+		}
+	}
+
+	config->cdev = cdev;
+	list_add_tail(&config->list, &cdev->configs);
+
+	INIT_LIST_HEAD(&config->functions);
+	config->next_interface_id = 0;
+	memset(config->interface, 0, sizeof(config->interface));
+
+	status = bind(config);
+	if (status < 0) {
+		while (!list_empty(&config->functions)) {
+			struct usb_function		*f;
+
+			f = list_first_entry(&config->functions,
+					struct usb_function, list);
+			list_del(&f->list);
+			if (f->unbind) {
+				DBG(cdev, "unbind function '%s'/%p\n",
+					f->name, f);
+				f->unbind(config, f);
+				/* may free memory for "f" */
+			}
+		}
+		list_del(&config->list);
+		config->cdev = NULL;
+	} else {
+		unsigned	i;
+
+		DBG(cdev, "cfg %d/%p speeds:%s%s%s\n",
+			config->bConfigurationValue, config,
+			config->superspeed ? " super" : "",
+			config->highspeed ? " high" : "",
+			config->fullspeed
+				? (gadget_is_dualspeed(cdev->gadget)
+					? " full"
+					: " full/low")
+				: "");
+
+		for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
+			struct usb_function	*f = config->interface[i];
+
+			if (!f)
+				continue;
+			DBG(cdev, "  interface %d = %s/%p\n",
+				i, f->name, f);
+		}
+	}
+
+	/* set_alt(), or next bind(), sets up
+	 * ep->driver_data as needed.
+	 */
+	usb_ep_autoconfig_reset(cdev->gadget);
+
+done:
+	if (status)
+		DBG(cdev, "added config '%s'/%u --> %d\n", config->label,
+				config->bConfigurationValue, status);
+	return status;
+}
+
+static void remove_config(struct usb_composite_dev *cdev,
+			      struct usb_configuration *config)
+{
+	while (!list_empty(&config->functions)) {
+		struct usb_function		*f;
+
+		f = list_first_entry(&config->functions,
+				struct usb_function, list);
+		list_del(&f->list);
+		if (f->unbind) {
+			DBG(cdev, "unbind function '%s'/%p\n", f->name, f);
+			f->unbind(config, f);
+			/* may free memory for "f" */
+		}
+	}
+	list_del(&config->list);
+	if (config->unbind) {
+		DBG(cdev, "unbind config '%s'/%p\n", config->label, config);
+		config->unbind(config);
+			/* may free memory for "c" */
+	}
+}
+
+/**
+ * usb_remove_config() - remove a configuration from a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration
+ *
+ * Drivers must call usb_gadget_disconnect before calling this function
+ * to disconnect the device from the host and make sure the host will not
+ * try to enumerate the device while we are changing the config list.
+ */
+void usb_remove_config(struct usb_composite_dev *cdev,
+		      struct usb_configuration *config)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->config == config)
+		reset_config(cdev);
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+
+	remove_config(cdev, config);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We support strings in multiple languages ... string descriptor zero
+ * says which languages are supported.  The typical case will be that
+ * only one language (probably English) is used, with I18N handled on
+ * the host side.
+ */
+
+static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
+{
+	const struct usb_gadget_strings	*s;
+	__le16				language;
+	__le16				*tmp;
+
+	while (*sp) {
+		s = *sp;
+		language = cpu_to_le16(s->language);
+		for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
+			if (*tmp == language)
+				goto repeat;
+		}
+		*tmp++ = language;
+repeat:
+		sp++;
+	}
+}
+
+static int lookup_string(
+	struct usb_gadget_strings	**sp,
+	void				*buf,
+	u16				language,
+	int				id
+)
+{
+	struct usb_gadget_strings	*s;
+	int				value;
+
+	while (*sp) {
+		s = *sp++;
+		if (s->language != language)
+			continue;
+		value = usb_gadget_get_string(s, id, buf);
+		if (value > 0)
+			return value;
+	}
+	return -EINVAL;
+}
+
+static int get_string(struct usb_composite_dev *cdev,
+		void *buf, u16 language, int id)
+{
+	struct usb_configuration	*c;
+	struct usb_function		*f;
+	int				len;
+	const char			*str;
+
+	/* Yes, not only is USB's I18N support probably more than most
+	 * folk will ever care about ... also, it's all supported here.
+	 * (Except for UTF8 support for Unicode's "Astral Planes".)
+	 */
+
+	/* 0 == report all available language codes */
+	if (id == 0) {
+		struct usb_string_descriptor	*s = buf;
+		struct usb_gadget_strings	**sp;
+
+		memset(s, 0, 256);
+		s->bDescriptorType = USB_DT_STRING;
+
+		sp = composite->strings;
+		if (sp)
+			collect_langs(sp, s->wData);
+
+		list_for_each_entry(c, &cdev->configs, list) {
+			sp = c->strings;
+			if (sp)
+				collect_langs(sp, s->wData);
+
+			list_for_each_entry(f, &c->functions, list) {
+				sp = f->strings;
+				if (sp)
+					collect_langs(sp, s->wData);
+			}
+		}
+
+		for (len = 0; len <= 126 && s->wData[len]; len++)
+			continue;
+		if (!len)
+			return -EINVAL;
+
+		s->bLength = 2 * (len + 1);
+		return s->bLength;
+	}
+
+	/* Otherwise, look up and return a specified string.  First
+	 * check if the string has not been overridden.
+	 */
+	if (cdev->manufacturer_override == id)
+		str = iManufacturer ?: composite->iManufacturer ?:
+			composite_manufacturer;
+	else if (cdev->product_override == id)
+		str = iProduct ?: composite->iProduct;
+	else if (cdev->serial_override == id)
+		str = iSerialNumber ?: composite->iSerialNumber;
+	else
+		str = NULL;
+	if (str) {
+		struct usb_gadget_strings strings = {
+			.language = language,
+			.strings  = &(struct usb_string) { 0xff, str }
+		};
+		return usb_gadget_get_string(&strings, 0xff, buf);
+	}
+
+	/* String IDs are device-scoped, so we look up each string
+	 * table we're told about.  These lookups are infrequent;
+	 * simpler-is-better here.
+	 */
+	if (composite->strings) {
+		len = lookup_string(composite->strings, buf, language, id);
+		if (len > 0)
+			return len;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->strings) {
+			len = lookup_string(c->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+		list_for_each_entry(f, &c->functions, list) {
+			if (!f->strings)
+				continue;
+			len = lookup_string(f->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * usb_string_id() - allocate an unused string ID
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_id() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
+ */
+int usb_string_id(struct usb_composite_dev *cdev)
+{
+	if (cdev->next_string_id < 254) {
+		/* string id 0 is reserved by USB spec for list of
+		 * supported languages */
+		/* 255 reserved as well? -- mina86 */
+		cdev->next_string_id++;
+		return cdev->next_string_id;
+	}
+	return -ENODEV;
+}
+
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+	int next = cdev->next_string_id;
+
+	for (; str->s; ++str) {
+		if (unlikely(next >= 254))
+			return -ENODEV;
+		str->id = ++next;
+	}
+
+	cdev->next_string_id = next;
+
+	return 0;
+}
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @c: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID.  This ID and next @n-1 IDs are now
+ * valid IDs.  At least provided that @n is non-zero because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs.  Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+	unsigned next = c->next_string_id;
+	if (unlikely(n > 254 || (unsigned)next + n > 254))
+		return -ENODEV;
+	c->next_string_id += n;
+	return next + 1;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	if (req->status || req->actual != req->length)
+		DBG((struct usb_composite_dev *) ep->driver_data,
+				"setup complete --> %d, %d/%d\n",
+				req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver(like
+ * device and endpoint feature flags, and their status).  It's all
+ * housekeeping for the gadget function we're implementing.  Most of
+ * the work is in config and function specific setup.
+ */
+static int
+composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_request		*req = cdev->req;
+	int				value = -EOPNOTSUPP;
+	int				status = 0;
+	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u8				intf = w_index & 0xFF;
+	u16				w_value = le16_to_cpu(ctrl->wValue);
+	u16				w_length = le16_to_cpu(ctrl->wLength);
+	struct usb_function		*f = NULL;
+	u8				endp;
+
+	/* partial re-init of the response message; the function or the
+	 * gadget might need to intercept e.g. a control-OUT completion
+	 * when we delegate to it.
+	 */
+	req->zero = 0;
+	req->complete = composite_setup_complete;
+	req->length = 0;
+	gadget->ep0->driver_data = cdev;
+
+	switch (ctrl->bRequest) {
+
+	/* we handle all standard USB descriptors */
+	case USB_REQ_GET_DESCRIPTOR:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		switch (w_value >> 8) {
+
+		case USB_DT_DEVICE:
+			cdev->desc.bNumConfigurations =
+				count_configs(cdev, USB_DT_DEVICE);
+			cdev->desc.bMaxPacketSize0 =
+				cdev->gadget->ep0->maxpacket;
+			if (gadget_is_superspeed(gadget)) {
+				if (gadget->speed >= USB_SPEED_SUPER) {
+					cdev->desc.bcdUSB = cpu_to_le16(0x0300);
+					cdev->desc.bMaxPacketSize0 = 9;
+				} else {
+					cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+				}
+			}
+
+			value = min(w_length, (u16) sizeof cdev->desc);
+			memcpy(req->buf, &cdev->desc, value);
+			break;
+		case USB_DT_DEVICE_QUALIFIER:
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
+				break;
+			device_qual(cdev);
+			value = min_t(int, w_length,
+				sizeof(struct usb_qualifier_descriptor));
+			break;
+		case USB_DT_OTHER_SPEED_CONFIG:
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
+				break;
+			/* FALLTHROUGH */
+		case USB_DT_CONFIG:
+			value = config_desc(cdev, w_value);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		case USB_DT_STRING:
+			value = get_string(cdev, req->buf,
+					w_index, w_value & 0xff);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		case USB_DT_BOS:
+			if (gadget_is_superspeed(gadget)) {
+				value = bos_desc(cdev);
+				value = min(w_length, (u16) value);
+			}
+			break;
+		}
+		break;
+
+	/* any number of configs can work */
+	case USB_REQ_SET_CONFIGURATION:
+		if (ctrl->bRequestType != 0)
+			goto unknown;
+		if (gadget_is_otg(gadget)) {
+			if (gadget->a_hnp_support)
+				DBG(cdev, "HNP available\n");
+			else if (gadget->a_alt_hnp_support)
+				DBG(cdev, "HNP on another port\n");
+			else
+				VDBG(cdev, "HNP inactive\n");
+		}
+		spin_lock(&cdev->lock);
+		value = set_config(cdev, ctrl, w_value);
+		spin_unlock(&cdev->lock);
+		break;
+	case USB_REQ_GET_CONFIGURATION:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		if (cdev->config)
+			*(u8 *)req->buf = cdev->config->bConfigurationValue;
+		else
+			*(u8 *)req->buf = 0;
+		value = min(w_length, (u16) 1);
+		break;
+
+	/* function drivers must handle get/set altsetting; if there's
+	 * no get() method, we know only altsetting zero works.
+	 */
+	case USB_REQ_SET_INTERFACE:
+		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+			goto unknown;
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		if (w_value && !f->set_alt)
+			break;
+		value = f->set_alt(f, w_index, w_value);
+		if (value == USB_GADGET_DELAYED_STATUS) {
+			DBG(cdev,
+			 "%s: interface %d (%s) requested delayed status\n",
+					__func__, intf, f->name);
+			cdev->delayed_status++;
+			DBG(cdev, "delayed_status count %d\n",
+					cdev->delayed_status);
+		}
+		break;
+	case USB_REQ_GET_INTERFACE:
+		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+			goto unknown;
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		/* lots of interfaces only need altsetting zero... */
+		value = f->get_alt ? f->get_alt(f, w_index) : 0;
+		if (value < 0)
+			break;
+		*((u8 *)req->buf) = value;
+		value = min(w_length, (u16) 1);
+		break;
+
+	/*
+	 * USB 3.0 additions:
+	 * Function driver should handle get_status request. If such cb
+	 * wasn't supplied we respond with default value = 0
+	 * Note: function driver should supply such cb only for the first
+	 * interface of the function
+	 */
+	case USB_REQ_GET_STATUS:
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
+			goto unknown;
+		value = 2;	/* This is the length of the get_status reply */
+		put_unaligned_le16(0, req->buf);
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		status = f->get_status ? f->get_status(f) : 0;
+		if (status < 0)
+			break;
+		put_unaligned_le16(status & 0x0000ffff, req->buf);
+		break;
+	/*
+	 * Function drivers should handle SetFeature/ClearFeature
+	 * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
+	 * only for the first interface of the function
+	 */
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
+			goto unknown;
+		switch (w_value) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
+			if (!f)
+				break;
+			value = 0;
+			if (f->func_suspend)
+				value = f->func_suspend(f, w_index >> 8);
+			if (value < 0) {
+				ERROR(cdev,
+				      "func_suspend() returned error %d\n",
+				      value);
+				value = 0;
+			}
+			break;
+		}
+		break;
+	default:
+unknown:
+		VDBG(cdev,
+			"non-core control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+
+		/* functions always handle their interfaces and endpoints...
+		 * punt other recipients (other, WUSB, ...) to the current
+		 * configuration code.
+		 *
+		 * REVISIT it could make sense to let the composite device
+		 * take such requests too, if that's ever needed:  to work
+		 * in config 0, etc.
+		 */
+		switch (ctrl->bRequestType & USB_RECIP_MASK) {
+		case USB_RECIP_INTERFACE:
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
+			break;
+
+		case USB_RECIP_ENDPOINT:
+			endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
+			list_for_each_entry(f, &cdev->config->functions, list) {
+				if (test_bit(endp, f->endpoints))
+					break;
+			}
+			if (&f->list == &cdev->config->functions)
+				f = NULL;
+			break;
+		}
+
+		if (f && f->setup)
+			value = f->setup(f, ctrl);
+		else {
+			struct usb_configuration	*c;
+
+			c = cdev->config;
+			if (c && c->setup)
+				value = c->setup(c, ctrl);
+		}
+
+		goto done;
+	}
+
+	/* respond with data transfer before status phase? */
+	if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) {
+		req->length = value;
+		req->zero = value < w_length;
+		value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			DBG(cdev, "ep_queue --> %d\n", value);
+			req->status = 0;
+			composite_setup_complete(gadget->ep0, req);
+		}
+	} else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) {
+		WARN(cdev,
+			"%s: Delayed status not supported for w_length != 0",
+			__func__);
+	}
+
+done:
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static void composite_disconnect(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	unsigned long			flags;
+
+	/* REVISIT:  should we have config and device level
+	 * disconnect callbacks?
+	 */
+	spin_lock_irqsave(&cdev->lock, flags);
+	if (cdev->config)
+		reset_config(cdev);
+	if (composite->disconnect)
+		composite->disconnect(cdev);
+	spin_unlock_irqrestore(&cdev->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static ssize_t composite_show_suspended(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_composite_dev *cdev = get_gadget_data(gadget);
+
+	return sprintf(buf, "%d\n", cdev->suspended);
+}
+
+static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL);
+
+static void
+composite_unbind(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+
+	/* composite_disconnect() must already have been called
+	 * by the underlying peripheral controller driver!
+	 * so there's no i/o concurrency that could affect the
+	 * state protected by cdev->lock.
+	 */
+	WARN_ON(cdev->config);
+
+	while (!list_empty(&cdev->configs)) {
+		struct usb_configuration	*c;
+		c = list_first_entry(&cdev->configs,
+				struct usb_configuration, list);
+		remove_config(cdev, c);
+	}
+	if (composite->unbind)
+		composite->unbind(cdev);
+
+	if (cdev->req) {
+		kfree(cdev->req->buf);
+		usb_ep_free_request(gadget->ep0, cdev->req);
+	}
+	device_remove_file(&gadget->dev, &dev_attr_suspended);
+	kfree(cdev);
+	set_gadget_data(gadget, NULL);
+	composite = NULL;
+}
+
+static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
+{
+	if (!*desc) {
+		int ret = usb_string_id(cdev);
+		if (unlikely(ret < 0))
+			WARNING(cdev, "failed to override string ID\n");
+		else
+			*desc = ret;
+	}
+
+	return *desc;
+}
+
+static int composite_bind(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev;
+	int				status = -ENOMEM;
+
+	cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
+	if (!cdev)
+		return status;
+
+	spin_lock_init(&cdev->lock);
+	cdev->gadget = gadget;
+	set_gadget_data(gadget, cdev);
+	INIT_LIST_HEAD(&cdev->configs);
+
+	/* preallocate control response and buffer */
+	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!cdev->req)
+		goto fail;
+	cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
+	if (!cdev->req->buf)
+		goto fail;
+	cdev->req->complete = composite_setup_complete;
+	gadget->ep0->driver_data = cdev;
+
+	cdev->bufsiz = USB_BUFSIZ;
+	cdev->driver = composite;
+
+	/*
+	 * As per USB compliance update, a device that is actively drawing
+	 * more than 100mA from USB must report itself as bus-powered in
+	 * the GetStatus(DEVICE) call.
+	 */
+	if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW)
+		usb_gadget_set_selfpowered(gadget);
+
+	/* interface and string IDs start at zero via kzalloc.
+	 * we force endpoints to start unassigned; few controller
+	 * drivers will zero ep->driver_data.
+	 */
+	usb_ep_autoconfig_reset(cdev->gadget);
+
+	/* composite gadget needs to assign strings for whole device (like
+	 * serial number), register function drivers, potentially update
+	 * power state and consumption, etc
+	 */
+	status = composite->bind(cdev);
+	if (status < 0)
+		goto fail;
+
+	cdev->desc = *composite->dev;
+
+	/* standardized runtime overrides for device ID data */
+	if (idVendor)
+		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	else
+		idVendor = le16_to_cpu(cdev->desc.idVendor);
+	if (idProduct)
+		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	else
+		idProduct = le16_to_cpu(cdev->desc.idProduct);
+	if (bcdDevice)
+		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+	else
+		bcdDevice = le16_to_cpu(cdev->desc.bcdDevice);
+
+	/* string overrides */
+	if (iManufacturer || !cdev->desc.iManufacturer) {
+		if (!iManufacturer && !composite->iManufacturer &&
+		    !*composite_manufacturer)
+			snprintf(composite_manufacturer,
+				 sizeof composite_manufacturer,
+				 "%s %s with %s",
+				 init_utsname()->sysname,
+				 init_utsname()->release,
+				 gadget->name);
+
+		cdev->manufacturer_override =
+			override_id(cdev, &cdev->desc.iManufacturer);
+	}
+
+	if (iProduct || (!cdev->desc.iProduct && composite->iProduct))
+		cdev->product_override =
+			override_id(cdev, &cdev->desc.iProduct);
+
+	if (iSerialNumber ||
+	    (!cdev->desc.iSerialNumber && composite->iSerialNumber))
+		cdev->serial_override =
+			override_id(cdev, &cdev->desc.iSerialNumber);
+
+	/* has userspace failed to provide a serial number? */
+	if (composite->needs_serial && !cdev->desc.iSerialNumber)
+		WARNING(cdev, "userspace failed to provide iSerialNumber\n");
+
+	/* finish up */
+	status = device_create_file(&gadget->dev, &dev_attr_suspended);
+	if (status)
+		goto fail;
+
+	INFO(cdev, "%s ready\n", composite->name);
+	return 0;
+
+fail:
+	composite_unbind(gadget);
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+composite_suspend(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+
+	/* REVISIT:  should we have config level
+	 * suspend/resume callbacks?
+	 */
+	DBG(cdev, "suspend\n");
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->suspend)
+				f->suspend(f);
+		}
+	}
+	if (composite->suspend)
+		composite->suspend(cdev);
+
+	cdev->suspended = 1;
+
+	usb_gadget_vbus_draw(gadget, 2);
+}
+
+static void
+composite_resume(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+	u8				maxpower;
+
+	/* REVISIT:  should we have config level
+	 * suspend/resume callbacks?
+	 */
+	DBG(cdev, "resume\n");
+	if (composite->resume)
+		composite->resume(cdev);
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->resume)
+				f->resume(f);
+		}
+
+		maxpower = cdev->config->bMaxPower;
+
+		usb_gadget_vbus_draw(gadget, maxpower ?
+			(2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW);
+	}
+
+	cdev->suspended = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver composite_driver = {
+	.bind		= composite_bind,
+	.unbind		= composite_unbind,
+
+	.setup		= composite_setup,
+	.disconnect	= composite_disconnect,
+
+	.suspend	= composite_suspend,
+	.resume		= composite_resume,
+
+	.driver	= {
+		.owner		= THIS_MODULE,
+	},
+};
+
+/**
+ * usb_composite_probe() - register a composite driver
+ * @driver: the driver to register
+ * @bind: the callback used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config().  This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * Context: single threaded during gadget setup
+ *
+ * This function is used to register drivers using the composite driver
+ * framework.  The return value is zero, or a negative errno value.
+ * Those values normally come from the driver's @bind method, which does
+ * all the work of setting up the driver to match the hardware.
+ *
+ * On successful return, the gadget is ready to respond to requests from
+ * the host, unless one of its components invokes usb_gadget_disconnect()
+ * while it was binding.  That would usually be done in order to wait for
+ * some userspace participation.
+ */
+int usb_composite_probe(struct usb_composite_driver *driver)
+{
+	if (!driver || !driver->dev || composite || !driver->bind)
+		return -EINVAL;
+
+	if (!driver->name)
+		driver->name = "composite";
+	if (!driver->iProduct)
+		driver->iProduct = driver->name;
+	composite_driver.function =  (char *) driver->name;
+	composite_driver.driver.name = driver->name;
+	composite_driver.max_speed = driver->max_speed;
+	composite = driver;
+
+	return usb_gadget_probe_driver(&composite_driver);
+}
+
+/**
+ * usb_composite_unregister() - unregister a composite driver
+ * @driver: the driver to unregister
+ *
+ * This function is used to unregister drivers using the composite
+ * driver framework.
+ */
+void usb_composite_unregister(struct usb_composite_driver *driver)
+{
+	if (composite != driver)
+		return;
+	usb_gadget_unregister_driver(&composite_driver);
+}
+
+/**
+ * usb_composite_setup_continue() - Continue with the control transfer
+ * @cdev: the composite device who's control transfer was kept waiting
+ *
+ * This function must be called by the USB function driver to continue
+ * with the control transfer's data/status stage in case it had requested to
+ * delay the data/status stages. A USB function's setup handler (e.g. set_alt())
+ * can request the composite framework to delay the setup request's data/status
+ * stages by returning USB_GADGET_DELAYED_STATUS.
+ */
+void usb_composite_setup_continue(struct usb_composite_dev *cdev)
+{
+	int			value;
+	struct usb_request	*req = cdev->req;
+	unsigned long		flags;
+
+	DBG(cdev, "%s\n", __func__);
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->delayed_status == 0) {
+		WARN(cdev, "%s: Unexpected call\n", __func__);
+
+	} else if (--cdev->delayed_status == 0) {
+		DBG(cdev, "%s: Completing delayed status\n", __func__);
+		req->length = 0;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			DBG(cdev, "ep_queue --> %d\n", value);
+			req->status = 0;
+			composite_setup_complete(cdev->gadget->ep0, req);
+		}
+	}
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+}
+
diff --git a/drivers/staging/ccg/composite.h b/drivers/staging/ccg/composite.h
new file mode 100644
index 000000000000..19a5adf18bf4
--- /dev/null
+++ b/drivers/staging/ccg/composite.h
@@ -0,0 +1,395 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef	__LINUX_USB_COMPOSITE_H
+#define	__LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example:  a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device.  Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/*
+ * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
+ * wish to delay the data/status stages of the control transfer till they
+ * are ready. The control transfer will then be kept from completing till
+ * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
+ * invoke usb_composite_setup_continue().
+ */
+#define USB_GADGET_DELAYED_STATUS       0x7fff	/* Impossibly large value */
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ *	string identifiers assigned during @bind(). If this
+ *	pointer is null after initiation, the function will not
+ *	be available at super speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ *	configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ *	available resources including string and interface identifiers used
+ *	in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ *	initialize usb_ep.driver data at this time (when it is used).
+ *	Note that setting an interface to its current altsetting resets
+ *	interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting.  If this is not provided,
+ *	then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
+ *	include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ *	GetStatus() request when the recepient is Interface.
+ * @func_suspend: callback to be called when
+ *	SetFeature(FUNCTION_SUSPEND) is reseived
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds.  Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver.  Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation.  Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once.  If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations.  An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+	const char			*name;
+	struct usb_gadget_strings	**strings;
+	struct usb_descriptor_header	**descriptors;
+	struct usb_descriptor_header	**hs_descriptors;
+	struct usb_descriptor_header	**ss_descriptors;
+
+	struct usb_configuration	*config;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching.
+	 * Related:  unbind() may kfree() but bind() won't...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*unbind)(struct usb_configuration *,
+					struct usb_function *);
+
+	/* runtime state management */
+	int			(*set_alt)(struct usb_function *,
+					unsigned interface, unsigned alt);
+	int			(*get_alt)(struct usb_function *,
+					unsigned interface);
+	void			(*disable)(struct usb_function *);
+	int			(*setup)(struct usb_function *,
+					const struct usb_ctrlrequest *);
+	void			(*suspend)(struct usb_function *);
+	void			(*resume)(struct usb_function *);
+
+	/* USB 3.0 additions */
+	int			(*get_status)(struct usb_function *);
+	int			(*func_suspend)(struct usb_function *,
+						u8 suspend_opt);
+	/* private: */
+	/* internals */
+	struct list_head		list;
+	DECLARE_BITMAP(endpoints, 32);
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+			struct usb_ep *_ep);
+
+#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ *	and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ *	Examples include OTG and vendor-specific descriptors.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ *	device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ *	the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers.  Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality.  Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device.  The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independent of each other, but that's
+ * not mandatory.  CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+	const char			*label;
+	struct usb_gadget_strings	**strings;
+	const struct usb_descriptor_header **descriptors;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	/* configuration management: unbind/setup */
+	void			(*unbind)(struct usb_configuration *);
+	int			(*setup)(struct usb_configuration *,
+					const struct usb_ctrlrequest *);
+
+	/* fields in the config descriptor */
+	u8			bConfigurationValue;
+	u8			iConfiguration;
+	u8			bmAttributes;
+	u8			bMaxPower;
+
+	struct usb_composite_dev	*cdev;
+
+	/* private: */
+	/* internals */
+	struct list_head	list;
+	struct list_head	functions;
+	u8			next_interface_id;
+	unsigned		superspeed:1;
+	unsigned		highspeed:1;
+	unsigned		fullspeed:1;
+	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+		struct usb_configuration *,
+		int (*)(struct usb_configuration *));
+
+void usb_remove_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @iProduct: Used as iProduct override if @dev->iProduct is not set.
+ *	If NULL value of @name is taken.
+ * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
+ *	not set. If NULL a default "<system> <release> with <udc>" value
+ *	will be used.
+ * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is
+ *	not set.
+ * @dev: Template descriptor for the device, including default device
+ *	identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during @bind
+ *	and language IDs provided in control requests
+ * @max_speed: Highest speed the driver supports.
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * 	a serial number.  If one is not provided, warning will be printed.
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config(). This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind; called as a side effect of unregistering
+ *	this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ *	after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ *	before function notifications
+ *
+ * Devices default to reporting self powered operation.  Devices which rely
+ * on bus powered operation should report this in their @bind method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden.  These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers.  (The strings will not be defined unless
+ * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+	const char				*name;
+	const char				*iProduct;
+	const char				*iManufacturer;
+	const char				*iSerialNumber;
+	const struct usb_device_descriptor	*dev;
+	struct usb_gadget_strings		**strings;
+	enum usb_device_speed			max_speed;
+	unsigned		needs_serial:1;
+
+	int			(*bind)(struct usb_composite_dev *cdev);
+	int			(*unbind)(struct usb_composite_dev *);
+
+	void			(*disconnect)(struct usb_composite_dev *);
+
+	/* global suspend hooks */
+	void			(*suspend)(struct usb_composite_dev *);
+	void			(*resume)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_probe(struct usb_composite_driver *driver);
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
+extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE:  it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ *     needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ *     "is it wired", plus (presumably in a wrapper structure)
+ *     bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ *     wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ *     support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ *     necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ *     configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	unsigned			bufsiz;
+
+	struct usb_configuration	*config;
+
+	/* private: */
+	/* internals */
+	unsigned int			suspended:1;
+	struct usb_device_descriptor	desc;
+	struct list_head		configs;
+	struct usb_composite_driver	*driver;
+	u8				next_string_id;
+	u8				manufacturer_override;
+	u8				product_override;
+	u8				serial_override;
+
+	/* the gadget driver won't enable the data pullup
+	 * while the deactivation count is nonzero.
+	 */
+	unsigned			deactivations;
+
+	/* the composite driver won't complete the control transfer's
+	 * data/status stages till delayed_status is zero.
+	 */
+	int				delayed_status;
+
+	/* protects deactivations and delayed_status counts*/
+	spinlock_t			lock;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+			      struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+
+/* messaging utils */
+#define DBG(d, fmt, args...) \
+	dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+	dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+	dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+	dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif	/* __LINUX_USB_COMPOSITE_H */
diff --git a/drivers/staging/ccg/config.c b/drivers/staging/ccg/config.c
new file mode 100644
index 000000000000..7542a72ce51a
--- /dev/null
+++ b/drivers/staging/ccg/config.c
@@ -0,0 +1,158 @@
+/*
+ * usb/gadget/config.c -- simplify building config descriptors
+ *
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+
+/**
+ * usb_descriptor_fillbuf - fill buffer with descriptors
+ * @buf: Buffer to be filled
+ * @buflen: Size of buf
+ * @src: Array of descriptor pointers, terminated by null pointer.
+ *
+ * Copies descriptors into the buffer, returning the length or a
+ * negative error code if they can't all be copied.  Useful when
+ * assembling descriptors for an associated set of interfaces used
+ * as part of configuring a composite device; or in other cases where
+ * sets of descriptors need to be marshaled.
+ */
+int
+usb_descriptor_fillbuf(void *buf, unsigned buflen,
+		const struct usb_descriptor_header **src)
+{
+	u8	*dest = buf;
+
+	if (!src)
+		return -EINVAL;
+
+	/* fill buffer from src[] until null descriptor ptr */
+	for (; NULL != *src; src++) {
+		unsigned		len = (*src)->bLength;
+
+		if (len > buflen)
+			return -EINVAL;
+		memcpy(dest, *src, len);
+		buflen -= len;
+		dest += len;
+	}
+	return dest - (u8 *)buf;
+}
+
+
+/**
+ * usb_gadget_config_buf - builts a complete configuration descriptor
+ * @config: Header for the descriptor, including characteristics such
+ *	as power requirements and number of interfaces.
+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
+ *	endpoint, etc) defining all functions in this device configuration.
+ * @buf: Buffer for the resulting configuration descriptor.
+ * @length: Length of buffer.  If this is not big enough to hold the
+ *	entire configuration descriptor, an error code will be returned.
+ *
+ * This copies descriptors into the response buffer, building a descriptor
+ * for that configuration.  It returns the buffer length or a negative
+ * status code.  The config.wTotalLength field is set to match the length
+ * of the result, but other descriptor fields (including power usage and
+ * interface count) must be set by the caller.
+ *
+ * Gadget drivers could use this when constructing a config descriptor
+ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
+ */
+int usb_gadget_config_buf(
+	const struct usb_config_descriptor	*config,
+	void					*buf,
+	unsigned				length,
+	const struct usb_descriptor_header	**desc
+)
+{
+	struct usb_config_descriptor		*cp = buf;
+	int					len;
+
+	/* config descriptor first */
+	if (length < USB_DT_CONFIG_SIZE || !desc)
+		return -EINVAL;
+	*cp = *config;
+
+	/* then interface/endpoint/class/vendor/... */
+	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+			length - USB_DT_CONFIG_SIZE, desc);
+	if (len < 0)
+		return len;
+	len += USB_DT_CONFIG_SIZE;
+	if (len > 0xffff)
+		return -EINVAL;
+
+	/* patch up the config descriptor */
+	cp->bLength = USB_DT_CONFIG_SIZE;
+	cp->bDescriptorType = USB_DT_CONFIG;
+	cp->wTotalLength = cpu_to_le16(len);
+	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
+	return len;
+}
+
+/**
+ * usb_copy_descriptors - copy a vector of USB descriptors
+ * @src: null-terminated vector to copy
+ * Context: initialization code, which may sleep
+ *
+ * This makes a copy of a vector of USB descriptors.  Its primary use
+ * is to support usb_function objects which can have multiple copies,
+ * each needing different descriptors.  Functions may have static
+ * tables of descriptors, which are used as templates and customized
+ * with identifiers (for interfaces, strings, endpoints, and more)
+ * as needed by a given function instance.
+ */
+struct usb_descriptor_header **
+usb_copy_descriptors(struct usb_descriptor_header **src)
+{
+	struct usb_descriptor_header **tmp;
+	unsigned bytes;
+	unsigned n_desc;
+	void *mem;
+	struct usb_descriptor_header **ret;
+
+	/* count descriptors and their sizes; then add vector size */
+	for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
+		bytes += (*tmp)->bLength;
+	bytes += (n_desc + 1) * sizeof(*tmp);
+
+	mem = kmalloc(bytes, GFP_KERNEL);
+	if (!mem)
+		return NULL;
+
+	/* fill in pointers starting at "tmp",
+	 * to descriptors copied starting at "mem";
+	 * and return "ret"
+	 */
+	tmp = mem;
+	ret = mem;
+	mem += (n_desc + 1) * sizeof(*tmp);
+	while (*src) {
+		memcpy(mem, *src, (*src)->bLength);
+		*tmp = mem;
+		tmp++;
+		mem += (*src)->bLength;
+		src++;
+	}
+	*tmp = NULL;
+
+	return ret;
+}
+
diff --git a/drivers/staging/ccg/epautoconf.c b/drivers/staging/ccg/epautoconf.c
new file mode 100644
index 000000000000..51f3d42f5a64
--- /dev/null
+++ b/drivers/staging/ccg/epautoconf.c
@@ -0,0 +1,393 @@
+/*
+ * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers
+ *
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "gadget_chips.h"
+
+
+/* we must assign addresses for configurable endpoints (like net2280) */
+static unsigned epnum;
+
+// #define MANY_ENDPOINTS
+#ifdef MANY_ENDPOINTS
+/* more than 15 configurable endpoints */
+static unsigned in_epnum;
+#endif
+
+
+/*
+ * This should work with endpoints from controller drivers sharing the
+ * same endpoint naming convention.  By example:
+ *
+ *	- ep1, ep2, ... address is fixed, not direction or type
+ *	- ep1in, ep2out, ... address and direction are fixed, not type
+ *	- ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
+ *	- ep1in-bulk, ep2out-iso, ... all three are fixed
+ *	- ep-* ... no functionality restrictions
+ *
+ * Type suffixes are "-bulk", "-iso", or "-int".  Numbers are decimal.
+ * Less common restrictions are implied by gadget_is_*().
+ *
+ * NOTE:  each endpoint is unidirectional, as specified by its USB
+ * descriptor; and isn't specific to a configuration or altsetting.
+ */
+static int
+ep_matches (
+	struct usb_gadget		*gadget,
+	struct usb_ep			*ep,
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
+)
+{
+	u8		type;
+	const char	*tmp;
+	u16		max;
+
+	int		num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (NULL != ep->driver_data)
+		return 0;
+
+	/* only support ep0 for portable CONTROL traffic */
+	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	if (USB_ENDPOINT_XFER_CONTROL == type)
+		return 0;
+
+	/* some other naming convention */
+	if ('e' != ep->name[0])
+		return 0;
+
+	/* type-restriction:  "-iso", "-bulk", or "-int".
+	 * direction-restriction:  "in", "out".
+	 */
+	if ('-' != ep->name[2]) {
+		tmp = strrchr (ep->name, '-');
+		if (tmp) {
+			switch (type) {
+			case USB_ENDPOINT_XFER_INT:
+				/* bulk endpoints handle interrupt transfers,
+				 * except the toggle-quirky iso-synch kind
+				 */
+				if ('s' == tmp[2])	// == "-iso"
+					return 0;
+				/* for now, avoid PXA "interrupt-in";
+				 * it's documented as never using DATA1.
+				 */
+				if (gadget_is_pxa (gadget)
+						&& 'i' == tmp [1])
+					return 0;
+				break;
+			case USB_ENDPOINT_XFER_BULK:
+				if ('b' != tmp[1])	// != "-bulk"
+					return 0;
+				break;
+			case USB_ENDPOINT_XFER_ISOC:
+				if ('s' != tmp[2])	// != "-iso"
+					return 0;
+			}
+		} else {
+			tmp = ep->name + strlen (ep->name);
+		}
+
+		/* direction-restriction:  "..in-..", "out-.." */
+		tmp--;
+		if (!isdigit (*tmp)) {
+			if (desc->bEndpointAddress & USB_DIR_IN) {
+				if ('n' != *tmp)
+					return 0;
+			} else {
+				if ('t' != *tmp)
+					return 0;
+			}
+		}
+	}
+
+	/*
+	 * Get the number of required streams from the EP companion
+	 * descriptor and see if the EP matches it
+	 */
+	if (usb_endpoint_xfer_bulk(desc)) {
+		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+
+	}
+
+	/*
+	 * If the protocol driver hasn't yet decided on wMaxPacketSize
+	 * and wants to know the maximum possible, provide the info.
+	 */
+	if (desc->wMaxPacketSize == 0)
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket);
+
+	/* endpoint maxpacket size is an input parameter, except for bulk
+	 * where it's an output parameter representing the full speed limit.
+	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
+	 */
+	max = 0x7ff & usb_endpoint_maxp(desc);
+	switch (type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		/* FALLTHROUGH */
+
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (ep->maxpacket < max)
+			return 0;
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+
+		/* BOTH:  "high bandwidth" works only at high speed */
+		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
+			if (!gadget_is_dualspeed(gadget))
+				return 0;
+			/* configure your hardware with enough buffering!! */
+		}
+		break;
+	}
+
+	/* MATCH!! */
+
+	/* report address */
+	desc->bEndpointAddress &= USB_DIR_IN;
+	if (isdigit (ep->name [2])) {
+		u8	num = simple_strtoul (&ep->name [2], NULL, 10);
+		desc->bEndpointAddress |= num;
+#ifdef	MANY_ENDPOINTS
+	} else if (desc->bEndpointAddress & USB_DIR_IN) {
+		if (++in_epnum > 15)
+			return 0;
+		desc->bEndpointAddress = USB_DIR_IN | in_epnum;
+#endif
+	} else {
+		if (++epnum > 15)
+			return 0;
+		desc->bEndpointAddress |= epnum;
+	}
+
+	/* report (variable) full speed bulk maxpacket */
+	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
+		int size = ep->maxpacket;
+
+		/* min() doesn't work on bitfields with gcc-3.5 */
+		if (size > 64)
+			size = 64;
+		desc->wMaxPacketSize = cpu_to_le16(size);
+	}
+	ep->address = desc->bEndpointAddress;
+	return 1;
+}
+
+static struct usb_ep *
+find_ep (struct usb_gadget *gadget, const char *name)
+{
+	struct usb_ep	*ep;
+
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		if (0 == strcmp (ep->name, name))
+			return ep;
+	}
+	return NULL;
+}
+
+/**
+ * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
+ * descriptor and ep companion descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *    initialized.  For periodic transfers, the maximum packet
+ *    size must also be initialized.  This is modified on
+ *    success.
+ * @ep_comp: Endpoint companion descriptor, with the required
+ *    number of streams. Will be modified when the chosen EP
+ *    supports a different number of streams.
+ *
+ * This routine replaces the usb_ep_autoconfig when needed
+ * superspeed enhancments. If such enhancemnets are required,
+ * the FD should call usb_ep_autoconfig_ss directly and provide
+ * the additional ep_comp parameter.
+ *
+ * By choosing an endpoint to use with the specified descriptor,
+ * this routine simplifies writing gadget drivers that work with
+ * multiple USB device controllers.  The endpoint would be
+ * passed later to usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration
+ * on your hardware.  This code may not make the best choices
+ * about how to use the USB controller, and it can't know all
+ * the restrictions that may apply. Some combinations of driver
+ * and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed and
+ * the bmAttribute field in the ep companion descriptor is
+ * updated with the assigned number of streams if it is
+ * different from the original value. To prevent the endpoint
+ * from being returned by a later autoconfig call, claim it by
+ * assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig_ss(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
+)
+{
+	struct usb_ep	*ep;
+	u8		type;
+
+	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* First, apply chip-specific "best usage" knowledge.
+	 * This might make a good usb_gadget_ops hook ...
+	 */
+	if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
+		/* ep-e, ep-f are PIO with only 64 byte fifos */
+		ep = find_ep (gadget, "ep-e");
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			goto found_ep;
+		ep = find_ep (gadget, "ep-f");
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			goto found_ep;
+
+	} else if (gadget_is_goku (gadget)) {
+		if (USB_ENDPOINT_XFER_INT == type) {
+			/* single buffering is enough */
+			ep = find_ep(gadget, "ep3-bulk");
+			if (ep && ep_matches(gadget, ep, desc, ep_comp))
+				goto found_ep;
+		} else if (USB_ENDPOINT_XFER_BULK == type
+				&& (USB_DIR_IN & desc->bEndpointAddress)) {
+			/* DMA may be available */
+			ep = find_ep(gadget, "ep2-bulk");
+			if (ep && ep_matches(gadget, ep, desc,
+					      ep_comp))
+				goto found_ep;
+		}
+
+#ifdef CONFIG_BLACKFIN
+	} else if (gadget_is_musbhdrc(gadget)) {
+		if ((USB_ENDPOINT_XFER_BULK == type) ||
+		    (USB_ENDPOINT_XFER_ISOC == type)) {
+			if (USB_DIR_IN & desc->bEndpointAddress)
+				ep = find_ep (gadget, "ep5in");
+			else
+				ep = find_ep (gadget, "ep6out");
+		} else if (USB_ENDPOINT_XFER_INT == type) {
+			if (USB_DIR_IN & desc->bEndpointAddress)
+				ep = find_ep(gadget, "ep1in");
+			else
+				ep = find_ep(gadget, "ep2out");
+		} else
+			ep = NULL;
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+			goto found_ep;
+#endif
+	}
+
+	/* Second, look at endpoints until an unclaimed one looks usable */
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		if (ep_matches(gadget, ep, desc, ep_comp))
+			goto found_ep;
+	}
+
+	/* Fail */
+	return NULL;
+found_ep:
+	ep->desc = NULL;
+	ep->comp_desc = NULL;
+	return ep;
+}
+
+/**
+ * usb_ep_autoconfig() - choose an endpoint matching the
+ * descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *	initialized.  For periodic transfers, the maximum packet
+ *	size must also be initialized.  This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers.  The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware.  This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed.  To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	return usb_ep_autoconfig_ss(gadget, desc, NULL);
+}
+
+
+/**
+ * usb_ep_autoconfig_reset - reset endpoint autoconfig state
+ * @gadget: device for which autoconfig state will be reset
+ *
+ * Use this for devices where one configuration may need to assign
+ * endpoint resources very differently from the next one.  It clears
+ * state such as ep->driver_data and the record of assigned endpoints
+ * used by usb_ep_autoconfig().
+ */
+void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+{
+	struct usb_ep	*ep;
+
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		ep->driver_data = NULL;
+	}
+#ifdef	MANY_ENDPOINTS
+	in_epnum = 0;
+#endif
+	epnum = 0;
+}
+
diff --git a/drivers/staging/ccg/f_acm.c b/drivers/staging/ccg/f_acm.c
new file mode 100644
index 000000000000..d672250a61fa
--- /dev/null
+++ b/drivers/staging/ccg/f_acm.c
@@ -0,0 +1,814 @@
+/*
+ * f_acm.c -- USB CDC serial (ACM) function driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ * Copyright (C) 2009 by Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+#include "gadget_chips.h"
+
+
+/*
+ * This CDC ACM function support just wraps control functions and
+ * notifications around the generic serial-over-usb code.
+ *
+ * Because CDC ACM is standardized by the USB-IF, many host operating
+ * systems have drivers for it.  Accordingly, ACM is the preferred
+ * interop solution for serial-port type connections.  The control
+ * models are often not necessary, and in any case don't do much in
+ * this bare-bones implementation.
+ *
+ * Note that even MS-Windows has some support for ACM.  However, that
+ * support is somewhat broken because when you use ACM in a composite
+ * device, having multiple interfaces confuses the poor OS.  It doesn't
+ * seem to understand CDC Union descriptors.  The new "association"
+ * descriptors (roughly equivalent to CDC Unions) may sometimes help.
+ */
+
+struct f_acm {
+	struct gserial			port;
+	u8				ctrl_id, data_id;
+	u8				port_num;
+
+	u8				pending;
+
+	/* lock is mostly for pending and notify_req ... they get accessed
+	 * by callbacks both from tty (open/close/break) under its spinlock,
+	 * and notify_req.complete() which can't use that lock.
+	 */
+	spinlock_t			lock;
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+
+	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
+
+	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
+	u16				port_handshake_bits;
+#define ACM_CTRL_RTS	(1 << 1)	/* unused with full duplex */
+#define ACM_CTRL_DTR	(1 << 0)	/* host is ready for data r/w */
+
+	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+	u16				serial_state;
+#define ACM_CTRL_OVERRUN	(1 << 6)
+#define ACM_CTRL_PARITY		(1 << 5)
+#define ACM_CTRL_FRAMING	(1 << 4)
+#define ACM_CTRL_RI		(1 << 3)
+#define ACM_CTRL_BRK		(1 << 2)
+#define ACM_CTRL_DSR		(1 << 1)
+#define ACM_CTRL_DCD		(1 << 0)
+};
+
+static inline struct f_acm *func_to_acm(struct usb_function *f)
+{
+	return container_of(f, struct f_acm, port.func);
+}
+
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+	return container_of(p, struct f_acm, port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* notification endpoint uses smallish and infrequent fixed-size messages */
+
+#define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
+#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
+
+/* interface and class descriptors: */
+
+static struct usb_interface_assoc_descriptor
+acm_iad_descriptor = {
+	.bLength =		sizeof acm_iad_descriptor,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount = 	2,	// control + data
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_ACM,
+	.bFunctionProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
+	/* .iFunction =		DYNAMIC */
+};
+
+
+static struct usb_interface_descriptor acm_control_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_ACM,
+	.bInterfaceProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_interface_descriptor acm_data_interface_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc acm_header_desc = {
+	.bLength =		sizeof(acm_header_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor
+acm_call_mgmt_descriptor = {
+	.bLength =		sizeof(acm_call_mgmt_descriptor),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
+	.bmCapabilities =	0,
+	/* .bDataInterface = DYNAMIC */
+};
+
+static struct usb_cdc_acm_descriptor acm_descriptor = {
+	.bLength =		sizeof(acm_descriptor),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
+	.bmCapabilities =	USB_CDC_CAP_LINE,
+};
+
+static struct usb_cdc_union_desc acm_union_desc = {
+	.bLength =		sizeof(acm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor acm_fs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.bInterval =		1 << GS_LOG2_NOTIFY_INTERVAL,
+};
+
+static struct usb_endpoint_descriptor acm_fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor acm_fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *acm_fs_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_fs_notify_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_fs_in_desc,
+	(struct usb_descriptor_header *) &acm_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor acm_hs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
+	.bInterval =		GS_LOG2_NOTIFY_INTERVAL+4,
+};
+
+static struct usb_endpoint_descriptor acm_hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor acm_hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *acm_hs_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_hs_notify_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_hs_in_desc,
+	(struct usb_descriptor_header *) &acm_hs_out_desc,
+	NULL,
+};
+
+static struct usb_endpoint_descriptor acm_ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor acm_ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
+	.bLength =              sizeof acm_ss_bulk_comp_desc,
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *acm_ss_function[] = {
+	(struct usb_descriptor_header *) &acm_iad_descriptor,
+	(struct usb_descriptor_header *) &acm_control_interface_desc,
+	(struct usb_descriptor_header *) &acm_header_desc,
+	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &acm_union_desc,
+	(struct usb_descriptor_header *) &acm_hs_notify_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &acm_data_interface_desc,
+	(struct usb_descriptor_header *) &acm_ss_in_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &acm_ss_out_desc,
+	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+#define ACM_CTRL_IDX	0
+#define ACM_DATA_IDX	1
+#define ACM_IAD_IDX	2
+
+/* static strings, in UTF-8 */
+static struct usb_string acm_string_defs[] = {
+	[ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
+	[ACM_DATA_IDX].s = "CDC ACM Data",
+	[ACM_IAD_IDX ].s = "CDC Serial",
+	{  /* ZEROES END LIST */ },
+};
+
+static struct usb_gadget_strings acm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		acm_string_defs,
+};
+
+static struct usb_gadget_strings *acm_strings[] = {
+	&acm_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM control ... data handling is delegated to tty library code.
+ * The main task of this function is to activate and deactivate
+ * that code based on device state; track parameters like line
+ * speed, handshake state, and so on; and issue notifications.
+ */
+
+static void acm_complete_set_line_coding(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	struct f_acm	*acm = ep->driver_data;
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+
+	if (req->status != 0) {
+		DBG(cdev, "acm ttyGS%d completion, err %d\n",
+				acm->port_num, req->status);
+		return;
+	}
+
+	/* normal completion */
+	if (req->actual != sizeof(acm->port_line_coding)) {
+		DBG(cdev, "acm ttyGS%d short resp, len %d\n",
+				acm->port_num, req->actual);
+		usb_ep_set_halt(ep);
+	} else {
+		struct usb_cdc_line_coding	*value = req->buf;
+
+		/* REVISIT:  we currently just remember this data.
+		 * If we change that, (a) validate it first, then
+		 * (b) update whatever hardware needs updating,
+		 * (c) worry about locking.  This is information on
+		 * the order of 9600-8-N-1 ... most of which means
+		 * nothing unless we control a real RS232 line.
+		 */
+		acm->port_line_coding = *value;
+	}
+}
+
+static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_acm		*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 *
+	 * Note CDC spec table 4 lists the ACM request profile.  It requires
+	 * encapsulated command support ... we don't handle any, and respond
+	 * to them by stalling.  Options include get/set/clear comm features
+	 * (not that useful) and SEND_BREAK.
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+	/* SET_LINE_CODING ... just read and save what the host sends */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_SET_LINE_CODING:
+		if (w_length != sizeof(struct usb_cdc_line_coding)
+				|| w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = w_length;
+		cdev->gadget->ep0->driver_data = acm;
+		req->complete = acm_complete_set_line_coding;
+		break;
+
+	/* GET_LINE_CODING ... return what host sent, or initial value */
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_GET_LINE_CODING:
+		if (w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = min_t(unsigned, w_length,
+				sizeof(struct usb_cdc_line_coding));
+		memcpy(req->buf, &acm->port_line_coding, value);
+		break;
+
+	/* SET_CONTROL_LINE_STATE ... save what the host sent */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_REQ_SET_CONTROL_LINE_STATE:
+		if (w_index != acm->ctrl_id)
+			goto invalid;
+
+		value = 0;
+
+		/* FIXME we should not allow data to flow until the
+		 * host sets the ACM_CTRL_DTR bit; and when it clears
+		 * that bit, we should return to that no-flow state.
+		 */
+		acm->port_handshake_bits = w_value;
+		break;
+
+	default:
+invalid:
+		VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
+			acm->port_num, ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "acm response on ttyGS%d, err %d\n",
+					acm->port_num, value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_acm		*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt == 0, so this is an activation or a reset */
+
+	if (intf == acm->ctrl_id) {
+		if (acm->notify->driver_data) {
+			VDBG(cdev, "reset acm control interface %d\n", intf);
+			usb_ep_disable(acm->notify);
+		} else {
+			VDBG(cdev, "init acm ctrl interface %d\n", intf);
+			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
+				return -EINVAL;
+		}
+		usb_ep_enable(acm->notify);
+		acm->notify->driver_data = acm;
+
+	} else if (intf == acm->data_id) {
+		if (acm->port.in->driver_data) {
+			DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
+			gserial_disconnect(&acm->port);
+		}
+		if (!acm->port.in->desc || !acm->port.out->desc) {
+			DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       acm->port.in) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       acm->port.out)) {
+				acm->port.in->desc = NULL;
+				acm->port.out->desc = NULL;
+				return -EINVAL;
+			}
+		}
+		gserial_connect(&acm->port, acm->port_num);
+
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void acm_disable(struct usb_function *f)
+{
+	struct f_acm	*acm = func_to_acm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
+	gserial_disconnect(&acm->port);
+	usb_ep_disable(acm->notify);
+	acm->notify->driver_data = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on success or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+		void *data, unsigned length)
+{
+	struct usb_ep			*ep = acm->notify;
+	struct usb_request		*req;
+	struct usb_cdc_notification	*notify;
+	const unsigned			len = sizeof(*notify) + length;
+	void				*buf;
+	int				status;
+
+	req = acm->notify_req;
+	acm->notify_req = NULL;
+	acm->pending = false;
+
+	req->length = len;
+	notify = req->buf;
+	buf = notify + 1;
+
+	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+			| USB_RECIP_INTERFACE;
+	notify->bNotificationType = type;
+	notify->wValue = cpu_to_le16(value);
+	notify->wIndex = cpu_to_le16(acm->ctrl_id);
+	notify->wLength = cpu_to_le16(length);
+	memcpy(buf, data, length);
+
+	/* ep_queue() can complete immediately if it fills the fifo... */
+	spin_unlock(&acm->lock);
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	spin_lock(&acm->lock);
+
+	if (status < 0) {
+		ERROR(acm->port.func.config->cdev,
+				"acm ttyGS%d can't notify serial state, %d\n",
+				acm->port_num, status);
+		acm->notify_req = req;
+	}
+
+	return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+	int			status;
+
+	spin_lock(&acm->lock);
+	if (acm->notify_req) {
+		DBG(cdev, "acm ttyGS%d serial state %04x\n",
+				acm->port_num, acm->serial_state);
+		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+				0, &acm->serial_state, sizeof(acm->serial_state));
+	} else {
+		acm->pending = true;
+		status = 0;
+	}
+	spin_unlock(&acm->lock);
+	return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_acm		*acm = req->context;
+	u8			doit = false;
+
+	/* on this call path we do NOT hold the port spinlock,
+	 * which is why ACM needs its own spinlock
+	 */
+	spin_lock(&acm->lock);
+	if (req->status != -ESHUTDOWN)
+		doit = acm->pending;
+	acm->notify_req = req;
+	spin_unlock(&acm->lock);
+
+	if (doit)
+		acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+	acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+	acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+	struct f_acm		*acm = port_to_acm(port);
+	u16			state;
+
+	state = acm->serial_state;
+	state &= ~ACM_CTRL_BRK;
+	if (duration)
+		state |= ACM_CTRL_BRK;
+
+	acm->serial_state = state;
+	return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM function driver setup/binding */
+static int
+acm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_acm		*acm = func_to_acm(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	acm->ctrl_id = status;
+	acm_iad_descriptor.bFirstInterface = status;
+
+	acm_control_interface_desc.bInterfaceNumber = status;
+	acm_union_desc .bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	acm->data_id = status;
+
+	acm_data_interface_desc.bInterfaceNumber = status;
+	acm_union_desc.bSlaveInterface0 = status;
+	acm_call_mgmt_descriptor.bDataInterface = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
+	if (!ep)
+		goto fail;
+	acm->port.in = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
+	if (!ep)
+		goto fail;
+	acm->port.out = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
+	if (!ep)
+		goto fail;
+	acm->notify = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	/* allocate notification */
+	acm->notify_req = gs_alloc_req(ep,
+			sizeof(struct usb_cdc_notification) + 2,
+			GFP_KERNEL);
+	if (!acm->notify_req)
+		goto fail;
+
+	acm->notify_req->complete = acm_cdc_notify_complete;
+	acm->notify_req->context = acm;
+
+	/* copy descriptors */
+	f->descriptors = usb_copy_descriptors(acm_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		acm_hs_in_desc.bEndpointAddress =
+				acm_fs_in_desc.bEndpointAddress;
+		acm_hs_out_desc.bEndpointAddress =
+				acm_fs_out_desc.bEndpointAddress;
+		acm_hs_notify_desc.bEndpointAddress =
+				acm_fs_notify_desc.bEndpointAddress;
+
+		/* copy descriptors */
+		f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
+	}
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		acm_ss_in_desc.bEndpointAddress =
+			acm_fs_in_desc.bEndpointAddress;
+		acm_ss_out_desc.bEndpointAddress =
+			acm_fs_out_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(acm_ss_function);
+		if (!f->ss_descriptors)
+			goto fail;
+	}
+
+	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			acm->port_num,
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			acm->port.in->name, acm->port.out->name,
+			acm->notify->name);
+	return 0;
+
+fail:
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+
+	/* we might as well release our claims on endpoints */
+	if (acm->notify)
+		acm->notify->driver_data = NULL;
+	if (acm->port.out)
+		acm->port.out->driver_data = NULL;
+	if (acm->port.in)
+		acm->port.in->driver_data = NULL;
+
+	ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
+
+	return status;
+}
+
+static void
+acm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_acm		*acm = func_to_acm(f);
+
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
+	usb_free_descriptors(f->descriptors);
+	gs_free_req(acm->notify, acm->notify_req);
+	kfree(acm);
+}
+
+/* Some controllers can't support CDC ACM ... */
+static inline bool can_support_cdc(struct usb_configuration *c)
+{
+	/* everything else is *probably* fine ... */
+	return true;
+}
+
+/**
+ * acm_bind_config - add a CDC ACM function to a configuration
+ * @c: the configuration to support the CDC ACM instance
+ * @port_num: /dev/ttyGS* port this interface will use
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gserial_setup() with enough ports to
+ * handle all the ones it binds.  Caller is also responsible
+ * for calling @gserial_cleanup() before module unload.
+ */
+int acm_bind_config(struct usb_configuration *c, u8 port_num)
+{
+	struct f_acm	*acm;
+	int		status;
+
+	if (!can_support_cdc(c))
+		return -EINVAL;
+
+	/* REVISIT might want instance-specific strings to help
+	 * distinguish instances ...
+	 */
+
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		acm_string_defs[ACM_CTRL_IDX].id = status;
+
+		acm_control_interface_desc.iInterface = status;
+
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		acm_string_defs[ACM_DATA_IDX].id = status;
+
+		acm_data_interface_desc.iInterface = status;
+
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		acm_string_defs[ACM_IAD_IDX].id = status;
+
+		acm_iad_descriptor.iFunction = status;
+	}
+
+	/* allocate and initialize one new instance */
+	acm = kzalloc(sizeof *acm, GFP_KERNEL);
+	if (!acm)
+		return -ENOMEM;
+
+	spin_lock_init(&acm->lock);
+
+	acm->port_num = port_num;
+
+	acm->port.connect = acm_connect;
+	acm->port.disconnect = acm_disconnect;
+	acm->port.send_break = acm_send_break;
+
+	acm->port.func.name = "acm";
+	acm->port.func.strings = acm_strings;
+	/* descriptors are per-instance copies */
+	acm->port.func.bind = acm_bind;
+	acm->port.func.unbind = acm_unbind;
+	acm->port.func.set_alt = acm_set_alt;
+	acm->port.func.setup = acm_setup;
+	acm->port.func.disable = acm_disable;
+
+	status = usb_add_function(c, &acm->port.func);
+	if (status)
+		kfree(acm);
+	return status;
+}
diff --git a/drivers/staging/ccg/f_fs.c b/drivers/staging/ccg/f_fs.c
new file mode 100644
index 000000000000..8adc79d1b402
--- /dev/null
+++ b/drivers/staging/ccg/f_fs.c
@@ -0,0 +1,2455 @@
+/*
+ * f_fs.c -- user mode file system API for USB composite function controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <mina86@mina86.com>
+ *
+ * Based on inode.c (GadgetFS) which was:
+ * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/blkdev.h>
+#include <linux/pagemap.h>
+#include <linux/export.h>
+#include <linux/hid.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/composite.h>
+#include <linux/usb/functionfs.h>
+
+
+#define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
+
+
+/* Debugging ****************************************************************/
+
+#ifdef VERBOSE_DEBUG
+#  define pr_vdebug pr_debug
+#  define ffs_dump_mem(prefix, ptr, len) \
+	print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
+#else
+#  define pr_vdebug(...)                 do { } while (0)
+#  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define ENTER()    pr_vdebug("%s()\n", __func__)
+
+
+/* The data structure and setup file ****************************************/
+
+enum ffs_state {
+	/*
+	 * Waiting for descriptors and strings.
+	 *
+	 * In this state no open(2), read(2) or write(2) on epfiles
+	 * may succeed (which should not be the problem as there
+	 * should be no such files opened in the first place).
+	 */
+	FFS_READ_DESCRIPTORS,
+	FFS_READ_STRINGS,
+
+	/*
+	 * We've got descriptors and strings.  We are or have called
+	 * functionfs_ready_callback().  functionfs_bind() may have
+	 * been called but we don't know.
+	 *
+	 * This is the only state in which operations on epfiles may
+	 * succeed.
+	 */
+	FFS_ACTIVE,
+
+	/*
+	 * All endpoints have been closed.  This state is also set if
+	 * we encounter an unrecoverable error.  The only
+	 * unrecoverable error is situation when after reading strings
+	 * from user space we fail to initialise epfiles or
+	 * functionfs_ready_callback() returns with error (<0).
+	 *
+	 * In this state no open(2), read(2) or write(2) (both on ep0
+	 * as well as epfile) may succeed (at this point epfiles are
+	 * unlinked and all closed so this is not a problem; ep0 is
+	 * also closed but ep0 file exists and so open(2) on ep0 must
+	 * fail).
+	 */
+	FFS_CLOSING
+};
+
+
+enum ffs_setup_state {
+	/* There is no setup request pending. */
+	FFS_NO_SETUP,
+	/*
+	 * User has read events and there was a setup request event
+	 * there.  The next read/write on ep0 will handle the
+	 * request.
+	 */
+	FFS_SETUP_PENDING,
+	/*
+	 * There was event pending but before user space handled it
+	 * some other event was introduced which canceled existing
+	 * setup.  If this state is set read/write on ep0 return
+	 * -EIDRM.  This state is only set when adding event.
+	 */
+	FFS_SETUP_CANCELED
+};
+
+
+
+struct ffs_epfile;
+struct ffs_function;
+
+struct ffs_data {
+	struct usb_gadget		*gadget;
+
+	/*
+	 * Protect access read/write operations, only one read/write
+	 * at a time.  As a consequence protects ep0req and company.
+	 * While setup request is being processed (queued) this is
+	 * held.
+	 */
+	struct mutex			mutex;
+
+	/*
+	 * Protect access to endpoint related structures (basically
+	 * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for
+	 * endpoint zero.
+	 */
+	spinlock_t			eps_lock;
+
+	/*
+	 * XXX REVISIT do we need our own request? Since we are not
+	 * handling setup requests immediately user space may be so
+	 * slow that another setup will be sent to the gadget but this
+	 * time not to us but another function and then there could be
+	 * a race.  Is that the case? Or maybe we can use cdev->req
+	 * after all, maybe we just need some spinlock for that?
+	 */
+	struct usb_request		*ep0req;		/* P: mutex */
+	struct completion		ep0req_completion;	/* P: mutex */
+	int				ep0req_status;		/* P: mutex */
+
+	/* reference counter */
+	atomic_t			ref;
+	/* how many files are opened (EP0 and others) */
+	atomic_t			opened;
+
+	/* EP0 state */
+	enum ffs_state			state;
+
+	/*
+	 * Possible transitions:
+	 * + FFS_NO_SETUP       -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
+	 *               happens only in ep0 read which is P: mutex
+	 * + FFS_SETUP_PENDING  -> FFS_NO_SETUP       -- P: ev.waitq.lock
+	 *               happens only in ep0 i/o  which is P: mutex
+	 * + FFS_SETUP_PENDING  -> FFS_SETUP_CANCELED -- P: ev.waitq.lock
+	 * + FFS_SETUP_CANCELED -> FFS_NO_SETUP       -- cmpxchg
+	 */
+	enum ffs_setup_state		setup_state;
+
+#define FFS_SETUP_STATE(ffs)					\
+	((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state,	\
+				       FFS_SETUP_CANCELED, FFS_NO_SETUP))
+
+	/* Events & such. */
+	struct {
+		u8				types[4];
+		unsigned short			count;
+		/* XXX REVISIT need to update it in some places, or do we? */
+		unsigned short			can_stall;
+		struct usb_ctrlrequest		setup;
+
+		wait_queue_head_t		waitq;
+	} ev; /* the whole structure, P: ev.waitq.lock */
+
+	/* Flags */
+	unsigned long			flags;
+#define FFS_FL_CALL_CLOSED_CALLBACK 0
+#define FFS_FL_BOUND                1
+
+	/* Active function */
+	struct ffs_function		*func;
+
+	/*
+	 * Device name, write once when file system is mounted.
+	 * Intended for user to read if she wants.
+	 */
+	const char			*dev_name;
+	/* Private data for our user (ie. gadget).  Managed by user. */
+	void				*private_data;
+
+	/* filled by __ffs_data_got_descs() */
+	/*
+	 * Real descriptors are 16 bytes after raw_descs (so you need
+	 * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the
+	 * first full speed descriptor).  raw_descs_length and
+	 * raw_fs_descs_length do not have those 16 bytes added.
+	 */
+	const void			*raw_descs;
+	unsigned			raw_descs_length;
+	unsigned			raw_fs_descs_length;
+	unsigned			fs_descs_count;
+	unsigned			hs_descs_count;
+
+	unsigned short			strings_count;
+	unsigned short			interfaces_count;
+	unsigned short			eps_count;
+	unsigned short			_pad1;
+
+	/* filled by __ffs_data_got_strings() */
+	/* ids in stringtabs are set in functionfs_bind() */
+	const void			*raw_strings;
+	struct usb_gadget_strings	**stringtabs;
+
+	/*
+	 * File system's super block, write once when file system is
+	 * mounted.
+	 */
+	struct super_block		*sb;
+
+	/* File permissions, written once when fs is mounted */
+	struct ffs_file_perms {
+		umode_t				mode;
+		uid_t				uid;
+		gid_t				gid;
+	}				file_perms;
+
+	/*
+	 * The endpoint files, filled by ffs_epfiles_create(),
+	 * destroyed by ffs_epfiles_destroy().
+	 */
+	struct ffs_epfile		*epfiles;
+};
+
+/* Reference counter handling */
+static void ffs_data_get(struct ffs_data *ffs);
+static void ffs_data_put(struct ffs_data *ffs);
+/* Creates new ffs_data object. */
+static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc));
+
+/* Opened counter handling. */
+static void ffs_data_opened(struct ffs_data *ffs);
+static void ffs_data_closed(struct ffs_data *ffs);
+
+/* Called with ffs->mutex held; take over ownership of data. */
+static int __must_check
+__ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len);
+static int __must_check
+__ffs_data_got_strings(struct ffs_data *ffs, char *data, size_t len);
+
+
+/* The function structure ***************************************************/
+
+struct ffs_ep;
+
+struct ffs_function {
+	struct usb_configuration	*conf;
+	struct usb_gadget		*gadget;
+	struct ffs_data			*ffs;
+
+	struct ffs_ep			*eps;
+	u8				eps_revmap[16];
+	short				*interfaces_nums;
+
+	struct usb_function		function;
+};
+
+
+static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
+{
+	return container_of(f, struct ffs_function, function);
+}
+
+static void ffs_func_free(struct ffs_function *func);
+
+static void ffs_func_eps_disable(struct ffs_function *func);
+static int __must_check ffs_func_eps_enable(struct ffs_function *func);
+
+static int ffs_func_bind(struct usb_configuration *,
+			 struct usb_function *);
+static void ffs_func_unbind(struct usb_configuration *,
+			    struct usb_function *);
+static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned);
+static void ffs_func_disable(struct usb_function *);
+static int ffs_func_setup(struct usb_function *,
+			  const struct usb_ctrlrequest *);
+static void ffs_func_suspend(struct usb_function *);
+static void ffs_func_resume(struct usb_function *);
+
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num);
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf);
+
+
+/* The endpoints structures *************************************************/
+
+struct ffs_ep {
+	struct usb_ep			*ep;	/* P: ffs->eps_lock */
+	struct usb_request		*req;	/* P: epfile->mutex */
+
+	/* [0]: full speed, [1]: high speed */
+	struct usb_endpoint_descriptor	*descs[2];
+
+	u8				num;
+
+	int				status;	/* P: epfile->mutex */
+};
+
+struct ffs_epfile {
+	/* Protects ep->ep and ep->req. */
+	struct mutex			mutex;
+	wait_queue_head_t		wait;
+
+	struct ffs_data			*ffs;
+	struct ffs_ep			*ep;	/* P: ffs->eps_lock */
+
+	struct dentry			*dentry;
+
+	char				name[5];
+
+	unsigned char			in;	/* P: ffs->eps_lock */
+	unsigned char			isoc;	/* P: ffs->eps_lock */
+
+	unsigned char			_pad;
+};
+
+static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
+
+static struct inode *__must_check
+ffs_sb_create_file(struct super_block *sb, const char *name, void *data,
+		   const struct file_operations *fops,
+		   struct dentry **dentry_p);
+
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+	__attribute__((warn_unused_result, nonnull));
+static char *ffs_prepare_buffer(const char * __user buf, size_t len)
+	__attribute__((warn_unused_result, nonnull));
+
+
+/* Control file aka ep0 *****************************************************/
+
+static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ffs_data *ffs = req->context;
+
+	complete_all(&ffs->ep0req_completion);
+}
+
+static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
+{
+	struct usb_request *req = ffs->ep0req;
+	int ret;
+
+	req->zero     = len < le16_to_cpu(ffs->ev.setup.wLength);
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+
+	req->buf      = data;
+	req->length   = len;
+
+	/*
+	 * UDC layer requires to provide a buffer even for ZLP, but should
+	 * not use it at all. Let's provide some poisoned pointer to catch
+	 * possible bug in the driver.
+	 */
+	if (req->buf == NULL)
+		req->buf = (void *)0xDEADBABE;
+
+	INIT_COMPLETION(ffs->ep0req_completion);
+
+	ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC);
+	if (unlikely(ret < 0))
+		return ret;
+
+	ret = wait_for_completion_interruptible(&ffs->ep0req_completion);
+	if (unlikely(ret)) {
+		usb_ep_dequeue(ffs->gadget->ep0, req);
+		return -EINTR;
+	}
+
+	ffs->setup_state = FFS_NO_SETUP;
+	return ffs->ep0req_status;
+}
+
+static int __ffs_ep0_stall(struct ffs_data *ffs)
+{
+	if (ffs->ev.can_stall) {
+		pr_vdebug("ep0 stall\n");
+		usb_ep_set_halt(ffs->gadget->ep0);
+		ffs->setup_state = FFS_NO_SETUP;
+		return -EL2HLT;
+	} else {
+		pr_debug("bogus ep0 stall!\n");
+		return -ESRCH;
+	}
+}
+
+static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
+			     size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	ssize_t ret;
+	char *data;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret < 0))
+		return ret;
+
+	/* Check state */
+	switch (ffs->state) {
+	case FFS_READ_DESCRIPTORS:
+	case FFS_READ_STRINGS:
+		/* Copy data */
+		if (unlikely(len < 16)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		data = ffs_prepare_buffer(buf, len);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		/* Handle data */
+		if (ffs->state == FFS_READ_DESCRIPTORS) {
+			pr_info("read descriptors\n");
+			ret = __ffs_data_got_descs(ffs, data, len);
+			if (unlikely(ret < 0))
+				break;
+
+			ffs->state = FFS_READ_STRINGS;
+			ret = len;
+		} else {
+			pr_info("read strings\n");
+			ret = __ffs_data_got_strings(ffs, data, len);
+			if (unlikely(ret < 0))
+				break;
+
+			ret = ffs_epfiles_create(ffs);
+			if (unlikely(ret)) {
+				ffs->state = FFS_CLOSING;
+				break;
+			}
+
+			ffs->state = FFS_ACTIVE;
+			mutex_unlock(&ffs->mutex);
+
+			ret = functionfs_ready_callback(ffs);
+			if (unlikely(ret < 0)) {
+				ffs->state = FFS_CLOSING;
+				return ret;
+			}
+
+			set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags);
+			return len;
+		}
+		break;
+
+	case FFS_ACTIVE:
+		data = NULL;
+		/*
+		 * We're called from user space, we can use _irq
+		 * rather then _irqsave
+		 */
+		spin_lock_irq(&ffs->ev.waitq.lock);
+		switch (FFS_SETUP_STATE(ffs)) {
+		case FFS_SETUP_CANCELED:
+			ret = -EIDRM;
+			goto done_spin;
+
+		case FFS_NO_SETUP:
+			ret = -ESRCH;
+			goto done_spin;
+
+		case FFS_SETUP_PENDING:
+			break;
+		}
+
+		/* FFS_SETUP_PENDING */
+		if (!(ffs->ev.setup.bRequestType & USB_DIR_IN)) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			break;
+		}
+
+		/* FFS_SETUP_PENDING and not stall */
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		data = ffs_prepare_buffer(buf, len);
+		if (IS_ERR(data)) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/*
+		 * We are guaranteed to be still in FFS_ACTIVE state
+		 * but the state of setup could have changed from
+		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need
+		 * to check for that.  If that happened we copied data
+		 * from user space in vain but it's unlikely.
+		 *
+		 * For sure we are not in FFS_NO_SETUP since this is
+		 * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP
+		 * transition can be performed and it's protected by
+		 * mutex.
+		 */
+		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+			ret = -EIDRM;
+done_spin:
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+		} else {
+			/* unlocks spinlock */
+			ret = __ffs_ep0_queue_wait(ffs, data, len);
+		}
+		kfree(data);
+		break;
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+	mutex_unlock(&ffs->mutex);
+	return ret;
+}
+
+static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
+				     size_t n)
+{
+	/*
+	 * We are holding ffs->ev.waitq.lock and ffs->mutex and we need
+	 * to release them.
+	 */
+	struct usb_functionfs_event events[n];
+	unsigned i = 0;
+
+	memset(events, 0, sizeof events);
+
+	do {
+		events[i].type = ffs->ev.types[i];
+		if (events[i].type == FUNCTIONFS_SETUP) {
+			events[i].u.setup = ffs->ev.setup;
+			ffs->setup_state = FFS_SETUP_PENDING;
+		}
+	} while (++i < n);
+
+	if (n < ffs->ev.count) {
+		ffs->ev.count -= n;
+		memmove(ffs->ev.types, ffs->ev.types + n,
+			ffs->ev.count * sizeof *ffs->ev.types);
+	} else {
+		ffs->ev.count = 0;
+	}
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+	mutex_unlock(&ffs->mutex);
+
+	return unlikely(__copy_to_user(buf, events, sizeof events))
+		? -EFAULT : sizeof events;
+}
+
+static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
+			    size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	char *data = NULL;
+	size_t n;
+	int ret;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret < 0))
+		return ret;
+
+	/* Check state */
+	if (ffs->state != FFS_ACTIVE) {
+		ret = -EBADFD;
+		goto done_mutex;
+	}
+
+	/*
+	 * We're called from user space, we can use _irq rather then
+	 * _irqsave
+	 */
+	spin_lock_irq(&ffs->ev.waitq.lock);
+
+	switch (FFS_SETUP_STATE(ffs)) {
+	case FFS_SETUP_CANCELED:
+		ret = -EIDRM;
+		break;
+
+	case FFS_NO_SETUP:
+		n = len / sizeof(struct usb_functionfs_event);
+		if (unlikely(!n)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if ((file->f_flags & O_NONBLOCK) && !ffs->ev.count) {
+			ret = -EAGAIN;
+			break;
+		}
+
+		if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq,
+							ffs->ev.count)) {
+			ret = -EINTR;
+			break;
+		}
+
+		return __ffs_ep0_read_events(ffs, buf,
+					     min(n, (size_t)ffs->ev.count));
+
+	case FFS_SETUP_PENDING:
+		if (ffs->ev.setup.bRequestType & USB_DIR_IN) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			goto done_mutex;
+		}
+
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		if (likely(len)) {
+			data = kmalloc(len, GFP_KERNEL);
+			if (unlikely(!data)) {
+				ret = -ENOMEM;
+				goto done_mutex;
+			}
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/* See ffs_ep0_write() */
+		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+			ret = -EIDRM;
+			break;
+		}
+
+		/* unlocks spinlock */
+		ret = __ffs_ep0_queue_wait(ffs, data, len);
+		if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len)))
+			ret = -EFAULT;
+		goto done_mutex;
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+done_mutex:
+	mutex_unlock(&ffs->mutex);
+	kfree(data);
+	return ret;
+}
+
+static int ffs_ep0_open(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = inode->i_private;
+
+	ENTER();
+
+	if (unlikely(ffs->state == FFS_CLOSING))
+		return -EBUSY;
+
+	file->private_data = ffs;
+	ffs_data_opened(ffs);
+
+	return 0;
+}
+
+static int ffs_ep0_release(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = file->private_data;
+
+	ENTER();
+
+	ffs_data_closed(ffs);
+
+	return 0;
+}
+
+static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
+{
+	struct ffs_data *ffs = file->private_data;
+	struct usb_gadget *gadget = ffs->gadget;
+	long ret;
+
+	ENTER();
+
+	if (code == FUNCTIONFS_INTERFACE_REVMAP) {
+		struct ffs_function *func = ffs->func;
+		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
+	} else if (gadget && gadget->ops->ioctl) {
+		ret = gadget->ops->ioctl(gadget, code, value);
+	} else {
+		ret = -ENOTTY;
+	}
+
+	return ret;
+}
+
+static const struct file_operations ffs_ep0_operations = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+
+	.open =		ffs_ep0_open,
+	.write =	ffs_ep0_write,
+	.read =		ffs_ep0_read,
+	.release =	ffs_ep0_release,
+	.unlocked_ioctl =	ffs_ep0_ioctl,
+};
+
+
+/* "Normal" endpoints operations ********************************************/
+
+static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	ENTER();
+	if (likely(req->context)) {
+		struct ffs_ep *ep = _ep->driver_data;
+		ep->status = req->status ? req->status : req->actual;
+		complete(req->context);
+	}
+}
+
+static ssize_t ffs_epfile_io(struct file *file,
+			     char __user *buf, size_t len, int read)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct ffs_ep *ep;
+	char *data = NULL;
+	ssize_t ret;
+	int halt;
+
+	goto first_try;
+	do {
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		mutex_unlock(&epfile->mutex);
+
+first_try:
+		/* Are we still active? */
+		if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) {
+			ret = -ENODEV;
+			goto error;
+		}
+
+		/* Wait for endpoint to be enabled */
+		ep = epfile->ep;
+		if (!ep) {
+			if (file->f_flags & O_NONBLOCK) {
+				ret = -EAGAIN;
+				goto error;
+			}
+
+			if (wait_event_interruptible(epfile->wait,
+						     (ep = epfile->ep))) {
+				ret = -EINTR;
+				goto error;
+			}
+		}
+
+		/* Do we halt? */
+		halt = !read == !epfile->in;
+		if (halt && epfile->isoc) {
+			ret = -EINVAL;
+			goto error;
+		}
+
+		/* Allocate & copy */
+		if (!halt && !data) {
+			data = kzalloc(len, GFP_KERNEL);
+			if (unlikely(!data))
+				return -ENOMEM;
+
+			if (!read &&
+			    unlikely(__copy_from_user(data, buf, len))) {
+				ret = -EFAULT;
+				goto error;
+			}
+		}
+
+		/* We will be using request */
+		ret = ffs_mutex_lock(&epfile->mutex,
+				     file->f_flags & O_NONBLOCK);
+		if (unlikely(ret))
+			goto error;
+
+		/*
+		 * We're called from user space, we can use _irq rather then
+		 * _irqsave
+		 */
+		spin_lock_irq(&epfile->ffs->eps_lock);
+
+		/*
+		 * While we were acquiring mutex endpoint got disabled
+		 * or changed?
+		 */
+	} while (unlikely(epfile->ep != ep));
+
+	/* Halt */
+	if (unlikely(halt)) {
+		if (likely(epfile->ep == ep) && !WARN_ON(!ep->ep))
+			usb_ep_set_halt(ep->ep);
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		ret = -EBADMSG;
+	} else {
+		/* Fire the request */
+		DECLARE_COMPLETION_ONSTACK(done);
+
+		struct usb_request *req = ep->req;
+		req->context  = &done;
+		req->complete = ffs_epfile_io_complete;
+		req->buf      = data;
+		req->length   = len;
+
+		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+
+		if (unlikely(ret < 0)) {
+			/* nop */
+		} else if (unlikely(wait_for_completion_interruptible(&done))) {
+			ret = -EINTR;
+			usb_ep_dequeue(ep->ep, req);
+		} else {
+			ret = ep->status;
+			if (read && ret > 0 &&
+			    unlikely(copy_to_user(buf, data, ret)))
+				ret = -EFAULT;
+		}
+	}
+
+	mutex_unlock(&epfile->mutex);
+error:
+	kfree(data);
+	return ret;
+}
+
+static ssize_t
+ffs_epfile_write(struct file *file, const char __user *buf, size_t len,
+		 loff_t *ptr)
+{
+	ENTER();
+
+	return ffs_epfile_io(file, (char __user *)buf, len, 0);
+}
+
+static ssize_t
+ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr)
+{
+	ENTER();
+
+	return ffs_epfile_io(file, buf, len, 1);
+}
+
+static int
+ffs_epfile_open(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	file->private_data = epfile;
+	ffs_data_opened(epfile->ffs);
+
+	return 0;
+}
+
+static int
+ffs_epfile_release(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	ffs_data_closed(epfile->ffs);
+
+	return 0;
+}
+
+static long ffs_epfile_ioctl(struct file *file, unsigned code,
+			     unsigned long value)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	int ret;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+	if (likely(epfile->ep)) {
+		switch (code) {
+		case FUNCTIONFS_FIFO_STATUS:
+			ret = usb_ep_fifo_status(epfile->ep->ep);
+			break;
+		case FUNCTIONFS_FIFO_FLUSH:
+			usb_ep_fifo_flush(epfile->ep->ep);
+			ret = 0;
+			break;
+		case FUNCTIONFS_CLEAR_HALT:
+			ret = usb_ep_clear_halt(epfile->ep->ep);
+			break;
+		case FUNCTIONFS_ENDPOINT_REVMAP:
+			ret = epfile->ep->num;
+			break;
+		default:
+			ret = -ENOTTY;
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+
+	return ret;
+}
+
+static const struct file_operations ffs_epfile_operations = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+
+	.open =		ffs_epfile_open,
+	.write =	ffs_epfile_write,
+	.read =		ffs_epfile_read,
+	.release =	ffs_epfile_release,
+	.unlocked_ioctl =	ffs_epfile_ioctl,
+};
+
+
+/* File system and super block operations ***********************************/
+
+/*
+ * Mounting the file system creates a controller file, used first for
+ * function configuration then later for event monitoring.
+ */
+
+static struct inode *__must_check
+ffs_sb_make_inode(struct super_block *sb, void *data,
+		  const struct file_operations *fops,
+		  const struct inode_operations *iops,
+		  struct ffs_file_perms *perms)
+{
+	struct inode *inode;
+
+	ENTER();
+
+	inode = new_inode(sb);
+
+	if (likely(inode)) {
+		struct timespec current_time = CURRENT_TIME;
+
+		inode->i_ino	 = get_next_ino();
+		inode->i_mode    = perms->mode;
+		inode->i_uid     = perms->uid;
+		inode->i_gid     = perms->gid;
+		inode->i_atime   = current_time;
+		inode->i_mtime   = current_time;
+		inode->i_ctime   = current_time;
+		inode->i_private = data;
+		if (fops)
+			inode->i_fop = fops;
+		if (iops)
+			inode->i_op  = iops;
+	}
+
+	return inode;
+}
+
+/* Create "regular" file */
+static struct inode *ffs_sb_create_file(struct super_block *sb,
+					const char *name, void *data,
+					const struct file_operations *fops,
+					struct dentry **dentry_p)
+{
+	struct ffs_data	*ffs = sb->s_fs_info;
+	struct dentry	*dentry;
+	struct inode	*inode;
+
+	ENTER();
+
+	dentry = d_alloc_name(sb->s_root, name);
+	if (unlikely(!dentry))
+		return NULL;
+
+	inode = ffs_sb_make_inode(sb, data, fops, NULL, &ffs->file_perms);
+	if (unlikely(!inode)) {
+		dput(dentry);
+		return NULL;
+	}
+
+	d_add(dentry, inode);
+	if (dentry_p)
+		*dentry_p = dentry;
+
+	return inode;
+}
+
+/* Super block */
+static const struct super_operations ffs_sb_operations = {
+	.statfs =	simple_statfs,
+	.drop_inode =	generic_delete_inode,
+};
+
+struct ffs_sb_fill_data {
+	struct ffs_file_perms perms;
+	umode_t root_mode;
+	const char *dev_name;
+	union {
+		/* set by ffs_fs_mount(), read by ffs_sb_fill() */
+		void *private_data;
+		/* set by ffs_sb_fill(), read by ffs_fs_mount */
+		struct ffs_data *ffs_data;
+	};
+};
+
+static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
+{
+	struct ffs_sb_fill_data *data = _data;
+	struct inode	*inode;
+	struct ffs_data	*ffs;
+
+	ENTER();
+
+	/* Initialise data */
+	ffs = ffs_data_new();
+	if (unlikely(!ffs))
+		goto Enomem;
+
+	ffs->sb              = sb;
+	ffs->dev_name        = kstrdup(data->dev_name, GFP_KERNEL);
+	if (unlikely(!ffs->dev_name))
+		goto Enomem;
+	ffs->file_perms      = data->perms;
+	ffs->private_data    = data->private_data;
+
+	/* used by the caller of this function */
+	data->ffs_data       = ffs;
+
+	sb->s_fs_info        = ffs;
+	sb->s_blocksize      = PAGE_CACHE_SIZE;
+	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_magic          = FUNCTIONFS_MAGIC;
+	sb->s_op             = &ffs_sb_operations;
+	sb->s_time_gran      = 1;
+
+	/* Root inode */
+	data->perms.mode = data->root_mode;
+	inode = ffs_sb_make_inode(sb, NULL,
+				  &simple_dir_operations,
+				  &simple_dir_inode_operations,
+				  &data->perms);
+	sb->s_root = d_make_root(inode);
+	if (unlikely(!sb->s_root))
+		goto Enomem;
+
+	/* EP0 file */
+	if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs,
+					 &ffs_ep0_operations, NULL)))
+		goto Enomem;
+
+	return 0;
+
+Enomem:
+	return -ENOMEM;
+}
+
+static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
+{
+	ENTER();
+
+	if (!opts || !*opts)
+		return 0;
+
+	for (;;) {
+		char *end, *eq, *comma;
+		unsigned long value;
+
+		/* Option limit */
+		comma = strchr(opts, ',');
+		if (comma)
+			*comma = 0;
+
+		/* Value limit */
+		eq = strchr(opts, '=');
+		if (unlikely(!eq)) {
+			pr_err("'=' missing in %s\n", opts);
+			return -EINVAL;
+		}
+		*eq = 0;
+
+		/* Parse value */
+		value = simple_strtoul(eq + 1, &end, 0);
+		if (unlikely(*end != ',' && *end != 0)) {
+			pr_err("%s: invalid value: %s\n", opts, eq + 1);
+			return -EINVAL;
+		}
+
+		/* Interpret option */
+		switch (eq - opts) {
+		case 5:
+			if (!memcmp(opts, "rmode", 5))
+				data->root_mode  = (value & 0555) | S_IFDIR;
+			else if (!memcmp(opts, "fmode", 5))
+				data->perms.mode = (value & 0666) | S_IFREG;
+			else
+				goto invalid;
+			break;
+
+		case 4:
+			if (!memcmp(opts, "mode", 4)) {
+				data->root_mode  = (value & 0555) | S_IFDIR;
+				data->perms.mode = (value & 0666) | S_IFREG;
+			} else {
+				goto invalid;
+			}
+			break;
+
+		case 3:
+			if (!memcmp(opts, "uid", 3))
+				data->perms.uid = value;
+			else if (!memcmp(opts, "gid", 3))
+				data->perms.gid = value;
+			else
+				goto invalid;
+			break;
+
+		default:
+invalid:
+			pr_err("%s: invalid option\n", opts);
+			return -EINVAL;
+		}
+
+		/* Next iteration */
+		if (!comma)
+			break;
+		opts = comma + 1;
+	}
+
+	return 0;
+}
+
+/* "mount -t functionfs dev_name /dev/function" ends up here */
+
+static struct dentry *
+ffs_fs_mount(struct file_system_type *t, int flags,
+	      const char *dev_name, void *opts)
+{
+	struct ffs_sb_fill_data data = {
+		.perms = {
+			.mode = S_IFREG | 0600,
+			.uid = 0,
+			.gid = 0
+		},
+		.root_mode = S_IFDIR | 0500,
+	};
+	struct dentry *rv;
+	int ret;
+	void *ffs_dev;
+
+	ENTER();
+
+	ret = ffs_fs_parse_opts(&data, opts);
+	if (unlikely(ret < 0))
+		return ERR_PTR(ret);
+
+	ffs_dev = functionfs_acquire_dev_callback(dev_name);
+	if (IS_ERR(ffs_dev))
+		return ffs_dev;
+
+	data.dev_name = dev_name;
+	data.private_data = ffs_dev;
+	rv = mount_nodev(t, flags, &data, ffs_sb_fill);
+
+	/* data.ffs_data is set by ffs_sb_fill */
+	if (IS_ERR(rv))
+		functionfs_release_dev_callback(data.ffs_data);
+
+	return rv;
+}
+
+static void
+ffs_fs_kill_sb(struct super_block *sb)
+{
+	ENTER();
+
+	kill_litter_super(sb);
+	if (sb->s_fs_info) {
+		functionfs_release_dev_callback(sb->s_fs_info);
+		ffs_data_put(sb->s_fs_info);
+	}
+}
+
+static struct file_system_type ffs_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "functionfs",
+	.mount		= ffs_fs_mount,
+	.kill_sb	= ffs_fs_kill_sb,
+};
+
+
+/* Driver's main init/cleanup functions *************************************/
+
+static int functionfs_init(void)
+{
+	int ret;
+
+	ENTER();
+
+	ret = register_filesystem(&ffs_fs_type);
+	if (likely(!ret))
+		pr_info("file system registered\n");
+	else
+		pr_err("failed registering file system (%d)\n", ret);
+
+	return ret;
+}
+
+static void functionfs_cleanup(void)
+{
+	ENTER();
+
+	pr_info("unloading\n");
+	unregister_filesystem(&ffs_fs_type);
+}
+
+
+/* ffs_data and ffs_function construction and destruction code **************/
+
+static void ffs_data_clear(struct ffs_data *ffs);
+static void ffs_data_reset(struct ffs_data *ffs);
+
+static void ffs_data_get(struct ffs_data *ffs)
+{
+	ENTER();
+
+	atomic_inc(&ffs->ref);
+}
+
+static void ffs_data_opened(struct ffs_data *ffs)
+{
+	ENTER();
+
+	atomic_inc(&ffs->ref);
+	atomic_inc(&ffs->opened);
+}
+
+static void ffs_data_put(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (unlikely(atomic_dec_and_test(&ffs->ref))) {
+		pr_info("%s(): freeing\n", __func__);
+		ffs_data_clear(ffs);
+		BUG_ON(waitqueue_active(&ffs->ev.waitq) ||
+		       waitqueue_active(&ffs->ep0req_completion.wait));
+		kfree(ffs->dev_name);
+		kfree(ffs);
+	}
+}
+
+static void ffs_data_closed(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (atomic_dec_and_test(&ffs->opened)) {
+		ffs->state = FFS_CLOSING;
+		ffs_data_reset(ffs);
+	}
+
+	ffs_data_put(ffs);
+}
+
+static struct ffs_data *ffs_data_new(void)
+{
+	struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
+	if (unlikely(!ffs))
+		return 0;
+
+	ENTER();
+
+	atomic_set(&ffs->ref, 1);
+	atomic_set(&ffs->opened, 0);
+	ffs->state = FFS_READ_DESCRIPTORS;
+	mutex_init(&ffs->mutex);
+	spin_lock_init(&ffs->eps_lock);
+	init_waitqueue_head(&ffs->ev.waitq);
+	init_completion(&ffs->ep0req_completion);
+
+	/* XXX REVISIT need to update it in some places, or do we? */
+	ffs->ev.can_stall = 1;
+
+	return ffs;
+}
+
+static void ffs_data_clear(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags))
+		functionfs_closed_callback(ffs);
+
+	BUG_ON(ffs->gadget);
+
+	if (ffs->epfiles)
+		ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count);
+
+	kfree(ffs->raw_descs);
+	kfree(ffs->raw_strings);
+	kfree(ffs->stringtabs);
+}
+
+static void ffs_data_reset(struct ffs_data *ffs)
+{
+	ENTER();
+
+	ffs_data_clear(ffs);
+
+	ffs->epfiles = NULL;
+	ffs->raw_descs = NULL;
+	ffs->raw_strings = NULL;
+	ffs->stringtabs = NULL;
+
+	ffs->raw_descs_length = 0;
+	ffs->raw_fs_descs_length = 0;
+	ffs->fs_descs_count = 0;
+	ffs->hs_descs_count = 0;
+
+	ffs->strings_count = 0;
+	ffs->interfaces_count = 0;
+	ffs->eps_count = 0;
+
+	ffs->ev.count = 0;
+
+	ffs->state = FFS_READ_DESCRIPTORS;
+	ffs->setup_state = FFS_NO_SETUP;
+	ffs->flags = 0;
+}
+
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+{
+	struct usb_gadget_strings **lang;
+	int first_id;
+
+	ENTER();
+
+	if (WARN_ON(ffs->state != FFS_ACTIVE
+		 || test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
+		return -EBADFD;
+
+	first_id = usb_string_ids_n(cdev, ffs->strings_count);
+	if (unlikely(first_id < 0))
+		return first_id;
+
+	ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
+	if (unlikely(!ffs->ep0req))
+		return -ENOMEM;
+	ffs->ep0req->complete = ffs_ep0_complete;
+	ffs->ep0req->context = ffs;
+
+	lang = ffs->stringtabs;
+	for (lang = ffs->stringtabs; *lang; ++lang) {
+		struct usb_string *str = (*lang)->strings;
+		int id = first_id;
+		for (; str->s; ++id, ++str)
+			str->id = id;
+	}
+
+	ffs->gadget = cdev->gadget;
+	ffs_data_get(ffs);
+	return 0;
+}
+
+static void functionfs_unbind(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (!WARN_ON(!ffs->gadget)) {
+		usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req);
+		ffs->ep0req = NULL;
+		ffs->gadget = NULL;
+		ffs_data_put(ffs);
+		clear_bit(FFS_FL_BOUND, &ffs->flags);
+	}
+}
+
+static int ffs_epfiles_create(struct ffs_data *ffs)
+{
+	struct ffs_epfile *epfile, *epfiles;
+	unsigned i, count;
+
+	ENTER();
+
+	count = ffs->eps_count;
+	epfiles = kcalloc(count, sizeof(*epfiles), GFP_KERNEL);
+	if (!epfiles)
+		return -ENOMEM;
+
+	epfile = epfiles;
+	for (i = 1; i <= count; ++i, ++epfile) {
+		epfile->ffs = ffs;
+		mutex_init(&epfile->mutex);
+		init_waitqueue_head(&epfile->wait);
+		sprintf(epfiles->name, "ep%u",  i);
+		if (!unlikely(ffs_sb_create_file(ffs->sb, epfiles->name, epfile,
+						 &ffs_epfile_operations,
+						 &epfile->dentry))) {
+			ffs_epfiles_destroy(epfiles, i - 1);
+			return -ENOMEM;
+		}
+	}
+
+	ffs->epfiles = epfiles;
+	return 0;
+}
+
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
+{
+	struct ffs_epfile *epfile = epfiles;
+
+	ENTER();
+
+	for (; count; --count, ++epfile) {
+		BUG_ON(mutex_is_locked(&epfile->mutex) ||
+		       waitqueue_active(&epfile->wait));
+		if (epfile->dentry) {
+			d_delete(epfile->dentry);
+			dput(epfile->dentry);
+			epfile->dentry = NULL;
+		}
+	}
+
+	kfree(epfiles);
+}
+
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+				  struct usb_configuration *c,
+				  struct ffs_data *ffs)
+{
+	struct ffs_function *func;
+	int ret;
+
+	ENTER();
+
+	func = kzalloc(sizeof *func, GFP_KERNEL);
+	if (unlikely(!func))
+		return -ENOMEM;
+
+	func->function.name    = "Function FS Gadget";
+	func->function.strings = ffs->stringtabs;
+
+	func->function.bind    = ffs_func_bind;
+	func->function.unbind  = ffs_func_unbind;
+	func->function.set_alt = ffs_func_set_alt;
+	func->function.disable = ffs_func_disable;
+	func->function.setup   = ffs_func_setup;
+	func->function.suspend = ffs_func_suspend;
+	func->function.resume  = ffs_func_resume;
+
+	func->conf   = c;
+	func->gadget = cdev->gadget;
+	func->ffs = ffs;
+	ffs_data_get(ffs);
+
+	ret = usb_add_function(c, &func->function);
+	if (unlikely(ret))
+		ffs_func_free(func);
+
+	return ret;
+}
+
+static void ffs_func_free(struct ffs_function *func)
+{
+	struct ffs_ep *ep         = func->eps;
+	unsigned count            = func->ffs->eps_count;
+	unsigned long flags;
+
+	ENTER();
+
+	/* cleanup after autoconfig */
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		if (ep->ep && ep->req)
+			usb_ep_free_request(ep->ep, ep->req);
+		ep->req = NULL;
+		++ep;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+
+	ffs_data_put(func->ffs);
+
+	kfree(func->eps);
+	/*
+	 * eps and interfaces_nums are allocated in the same chunk so
+	 * only one free is required.  Descriptors are also allocated
+	 * in the same chunk.
+	 */
+
+	kfree(func);
+}
+
+static void ffs_func_eps_disable(struct ffs_function *func)
+{
+	struct ffs_ep *ep         = func->eps;
+	struct ffs_epfile *epfile = func->ffs->epfiles;
+	unsigned count            = func->ffs->eps_count;
+	unsigned long flags;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		/* pending requests get nuked */
+		if (likely(ep->ep))
+			usb_ep_disable(ep->ep);
+		epfile->ep = NULL;
+
+		++ep;
+		++epfile;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+}
+
+static int ffs_func_eps_enable(struct ffs_function *func)
+{
+	struct ffs_data *ffs      = func->ffs;
+	struct ffs_ep *ep         = func->eps;
+	struct ffs_epfile *epfile = ffs->epfiles;
+	unsigned count            = ffs->eps_count;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		struct usb_endpoint_descriptor *ds;
+		ds = ep->descs[ep->descs[1] ? 1 : 0];
+
+		ep->ep->driver_data = ep;
+		ep->ep->desc = ds;
+		ret = usb_ep_enable(ep->ep);
+		if (likely(!ret)) {
+			epfile->ep = ep;
+			epfile->in = usb_endpoint_dir_in(ds);
+			epfile->isoc = usb_endpoint_xfer_isoc(ds);
+		} else {
+			break;
+		}
+
+		wake_up(&epfile->wait);
+
+		++ep;
+		++epfile;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+
+	return ret;
+}
+
+
+/* Parsing and building descriptors and strings *****************************/
+
+/*
+ * This validates if data pointed by data is a valid USB descriptor as
+ * well as record how many interfaces, endpoints and strings are
+ * required by given configuration.  Returns address after the
+ * descriptor or NULL if data is invalid.
+ */
+
+enum ffs_entity_type {
+	FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT
+};
+
+typedef int (*ffs_entity_callback)(enum ffs_entity_type entity,
+				   u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv);
+
+static int __must_check ffs_do_desc(char *data, unsigned len,
+				    ffs_entity_callback entity, void *priv)
+{
+	struct usb_descriptor_header *_ds = (void *)data;
+	u8 length;
+	int ret;
+
+	ENTER();
+
+	/* At least two bytes are required: length and type */
+	if (len < 2) {
+		pr_vdebug("descriptor too short\n");
+		return -EINVAL;
+	}
+
+	/* If we have at least as many bytes as the descriptor takes? */
+	length = _ds->bLength;
+	if (len < length) {
+		pr_vdebug("descriptor longer then available data\n");
+		return -EINVAL;
+	}
+
+#define __entity_check_INTERFACE(val)  1
+#define __entity_check_STRING(val)     (val)
+#define __entity_check_ENDPOINT(val)   ((val) & USB_ENDPOINT_NUMBER_MASK)
+#define __entity(type, val) do {					\
+		pr_vdebug("entity " #type "(%02x)\n", (val));		\
+		if (unlikely(!__entity_check_ ##type(val))) {		\
+			pr_vdebug("invalid entity's value\n");		\
+			return -EINVAL;					\
+		}							\
+		ret = entity(FFS_ ##type, &val, _ds, priv);		\
+		if (unlikely(ret < 0)) {				\
+			pr_debug("entity " #type "(%02x); ret = %d\n",	\
+				 (val), ret);				\
+			return ret;					\
+		}							\
+	} while (0)
+
+	/* Parse descriptor depending on type. */
+	switch (_ds->bDescriptorType) {
+	case USB_DT_DEVICE:
+	case USB_DT_CONFIG:
+	case USB_DT_STRING:
+	case USB_DT_DEVICE_QUALIFIER:
+		/* function can't have any of those */
+		pr_vdebug("descriptor reserved for gadget: %d\n",
+		      _ds->bDescriptorType);
+		return -EINVAL;
+
+	case USB_DT_INTERFACE: {
+		struct usb_interface_descriptor *ds = (void *)_ds;
+		pr_vdebug("interface descriptor\n");
+		if (length != sizeof *ds)
+			goto inv_length;
+
+		__entity(INTERFACE, ds->bInterfaceNumber);
+		if (ds->iInterface)
+			__entity(STRING, ds->iInterface);
+	}
+		break;
+
+	case USB_DT_ENDPOINT: {
+		struct usb_endpoint_descriptor *ds = (void *)_ds;
+		pr_vdebug("endpoint descriptor\n");
+		if (length != USB_DT_ENDPOINT_SIZE &&
+		    length != USB_DT_ENDPOINT_AUDIO_SIZE)
+			goto inv_length;
+		__entity(ENDPOINT, ds->bEndpointAddress);
+	}
+		break;
+
+	case HID_DT_HID:
+		pr_vdebug("hid descriptor\n");
+		if (length != sizeof(struct hid_descriptor))
+			goto inv_length;
+		break;
+
+	case USB_DT_OTG:
+		if (length != sizeof(struct usb_otg_descriptor))
+			goto inv_length;
+		break;
+
+	case USB_DT_INTERFACE_ASSOCIATION: {
+		struct usb_interface_assoc_descriptor *ds = (void *)_ds;
+		pr_vdebug("interface association descriptor\n");
+		if (length != sizeof *ds)
+			goto inv_length;
+		if (ds->iFunction)
+			__entity(STRING, ds->iFunction);
+	}
+		break;
+
+	case USB_DT_OTHER_SPEED_CONFIG:
+	case USB_DT_INTERFACE_POWER:
+	case USB_DT_DEBUG:
+	case USB_DT_SECURITY:
+	case USB_DT_CS_RADIO_CONTROL:
+		/* TODO */
+		pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType);
+		return -EINVAL;
+
+	default:
+		/* We should never be here */
+		pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType);
+		return -EINVAL;
+
+inv_length:
+		pr_vdebug("invalid length: %d (descriptor %d)\n",
+			  _ds->bLength, _ds->bDescriptorType);
+		return -EINVAL;
+	}
+
+#undef __entity
+#undef __entity_check_DESCRIPTOR
+#undef __entity_check_INTERFACE
+#undef __entity_check_STRING
+#undef __entity_check_ENDPOINT
+
+	return length;
+}
+
+static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
+				     ffs_entity_callback entity, void *priv)
+{
+	const unsigned _len = len;
+	unsigned long num = 0;
+
+	ENTER();
+
+	for (;;) {
+		int ret;
+
+		if (num == count)
+			data = NULL;
+
+		/* Record "descriptor" entity */
+		ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv);
+		if (unlikely(ret < 0)) {
+			pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n",
+				 num, ret);
+			return ret;
+		}
+
+		if (!data)
+			return _len - len;
+
+		ret = ffs_do_desc(data, len, entity, priv);
+		if (unlikely(ret < 0)) {
+			pr_debug("%s returns %d\n", __func__, ret);
+			return ret;
+		}
+
+		len -= ret;
+		data += ret;
+		++num;
+	}
+}
+
+static int __ffs_data_do_entity(enum ffs_entity_type type,
+				u8 *valuep, struct usb_descriptor_header *desc,
+				void *priv)
+{
+	struct ffs_data *ffs = priv;
+
+	ENTER();
+
+	switch (type) {
+	case FFS_DESCRIPTOR:
+		break;
+
+	case FFS_INTERFACE:
+		/*
+		 * Interfaces are indexed from zero so if we
+		 * encountered interface "n" then there are at least
+		 * "n+1" interfaces.
+		 */
+		if (*valuep >= ffs->interfaces_count)
+			ffs->interfaces_count = *valuep + 1;
+		break;
+
+	case FFS_STRING:
+		/*
+		 * Strings are indexed from 1 (0 is magic ;) reserved
+		 * for languages list or some such)
+		 */
+		if (*valuep > ffs->strings_count)
+			ffs->strings_count = *valuep;
+		break;
+
+	case FFS_ENDPOINT:
+		/* Endpoints are indexed from 1 as well. */
+		if ((*valuep & USB_ENDPOINT_NUMBER_MASK) > ffs->eps_count)
+			ffs->eps_count = (*valuep & USB_ENDPOINT_NUMBER_MASK);
+		break;
+	}
+
+	return 0;
+}
+
+static int __ffs_data_got_descs(struct ffs_data *ffs,
+				char *const _data, size_t len)
+{
+	unsigned fs_count, hs_count;
+	int fs_len, ret = -EINVAL;
+	char *data = _data;
+
+	ENTER();
+
+	if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC ||
+		     get_unaligned_le32(data + 4) != len))
+		goto error;
+	fs_count = get_unaligned_le32(data +  8);
+	hs_count = get_unaligned_le32(data + 12);
+
+	if (!fs_count && !hs_count)
+		goto einval;
+
+	data += 16;
+	len  -= 16;
+
+	if (likely(fs_count)) {
+		fs_len = ffs_do_descs(fs_count, data, len,
+				      __ffs_data_do_entity, ffs);
+		if (unlikely(fs_len < 0)) {
+			ret = fs_len;
+			goto error;
+		}
+
+		data += fs_len;
+		len  -= fs_len;
+	} else {
+		fs_len = 0;
+	}
+
+	if (likely(hs_count)) {
+		ret = ffs_do_descs(hs_count, data, len,
+				   __ffs_data_do_entity, ffs);
+		if (unlikely(ret < 0))
+			goto error;
+	} else {
+		ret = 0;
+	}
+
+	if (unlikely(len != ret))
+		goto einval;
+
+	ffs->raw_fs_descs_length = fs_len;
+	ffs->raw_descs_length    = fs_len + ret;
+	ffs->raw_descs           = _data;
+	ffs->fs_descs_count      = fs_count;
+	ffs->hs_descs_count      = hs_count;
+
+	return 0;
+
+einval:
+	ret = -EINVAL;
+error:
+	kfree(_data);
+	return ret;
+}
+
+static int __ffs_data_got_strings(struct ffs_data *ffs,
+				  char *const _data, size_t len)
+{
+	u32 str_count, needed_count, lang_count;
+	struct usb_gadget_strings **stringtabs, *t;
+	struct usb_string *strings, *s;
+	const char *data = _data;
+
+	ENTER();
+
+	if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC ||
+		     get_unaligned_le32(data + 4) != len))
+		goto error;
+	str_count  = get_unaligned_le32(data + 8);
+	lang_count = get_unaligned_le32(data + 12);
+
+	/* if one is zero the other must be zero */
+	if (unlikely(!str_count != !lang_count))
+		goto error;
+
+	/* Do we have at least as many strings as descriptors need? */
+	needed_count = ffs->strings_count;
+	if (unlikely(str_count < needed_count))
+		goto error;
+
+	/*
+	 * If we don't need any strings just return and free all
+	 * memory.
+	 */
+	if (!needed_count) {
+		kfree(_data);
+		return 0;
+	}
+
+	/* Allocate everything in one chunk so there's less maintenance. */
+	{
+		struct {
+			struct usb_gadget_strings *stringtabs[lang_count + 1];
+			struct usb_gadget_strings stringtab[lang_count];
+			struct usb_string strings[lang_count*(needed_count+1)];
+		} *d;
+		unsigned i = 0;
+
+		d = kmalloc(sizeof *d, GFP_KERNEL);
+		if (unlikely(!d)) {
+			kfree(_data);
+			return -ENOMEM;
+		}
+
+		stringtabs = d->stringtabs;
+		t = d->stringtab;
+		i = lang_count;
+		do {
+			*stringtabs++ = t++;
+		} while (--i);
+		*stringtabs = NULL;
+
+		stringtabs = d->stringtabs;
+		t = d->stringtab;
+		s = d->strings;
+		strings = s;
+	}
+
+	/* For each language */
+	data += 16;
+	len -= 16;
+
+	do { /* lang_count > 0 so we can use do-while */
+		unsigned needed = needed_count;
+
+		if (unlikely(len < 3))
+			goto error_free;
+		t->language = get_unaligned_le16(data);
+		t->strings  = s;
+		++t;
+
+		data += 2;
+		len -= 2;
+
+		/* For each string */
+		do { /* str_count > 0 so we can use do-while */
+			size_t length = strnlen(data, len);
+
+			if (unlikely(length == len))
+				goto error_free;
+
+			/*
+			 * User may provide more strings then we need,
+			 * if that's the case we simply ignore the
+			 * rest
+			 */
+			if (likely(needed)) {
+				/*
+				 * s->id will be set while adding
+				 * function to configuration so for
+				 * now just leave garbage here.
+				 */
+				s->s = data;
+				--needed;
+				++s;
+			}
+
+			data += length + 1;
+			len -= length + 1;
+		} while (--str_count);
+
+		s->id = 0;   /* terminator */
+		s->s = NULL;
+		++s;
+
+	} while (--lang_count);
+
+	/* Some garbage left? */
+	if (unlikely(len))
+		goto error_free;
+
+	/* Done! */
+	ffs->stringtabs = stringtabs;
+	ffs->raw_strings = _data;
+
+	return 0;
+
+error_free:
+	kfree(stringtabs);
+error:
+	kfree(_data);
+	return -EINVAL;
+}
+
+
+/* Events handling and management *******************************************/
+
+static void __ffs_event_add(struct ffs_data *ffs,
+			    enum usb_functionfs_event_type type)
+{
+	enum usb_functionfs_event_type rem_type1, rem_type2 = type;
+	int neg = 0;
+
+	/*
+	 * Abort any unhandled setup
+	 *
+	 * We do not need to worry about some cmpxchg() changing value
+	 * of ffs->setup_state without holding the lock because when
+	 * state is FFS_SETUP_PENDING cmpxchg() in several places in
+	 * the source does nothing.
+	 */
+	if (ffs->setup_state == FFS_SETUP_PENDING)
+		ffs->setup_state = FFS_SETUP_CANCELED;
+
+	switch (type) {
+	case FUNCTIONFS_RESUME:
+		rem_type2 = FUNCTIONFS_SUSPEND;
+		/* FALL THROUGH */
+	case FUNCTIONFS_SUSPEND:
+	case FUNCTIONFS_SETUP:
+		rem_type1 = type;
+		/* Discard all similar events */
+		break;
+
+	case FUNCTIONFS_BIND:
+	case FUNCTIONFS_UNBIND:
+	case FUNCTIONFS_DISABLE:
+	case FUNCTIONFS_ENABLE:
+		/* Discard everything other then power management. */
+		rem_type1 = FUNCTIONFS_SUSPEND;
+		rem_type2 = FUNCTIONFS_RESUME;
+		neg = 1;
+		break;
+
+	default:
+		BUG();
+	}
+
+	{
+		u8 *ev  = ffs->ev.types, *out = ev;
+		unsigned n = ffs->ev.count;
+		for (; n; --n, ++ev)
+			if ((*ev == rem_type1 || *ev == rem_type2) == neg)
+				*out++ = *ev;
+			else
+				pr_vdebug("purging event %d\n", *ev);
+		ffs->ev.count = out - ffs->ev.types;
+	}
+
+	pr_vdebug("adding event %d\n", type);
+	ffs->ev.types[ffs->ev.count++] = type;
+	wake_up_locked(&ffs->ev.waitq);
+}
+
+static void ffs_event_add(struct ffs_data *ffs,
+			  enum usb_functionfs_event_type type)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	__ffs_event_add(ffs, type);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+}
+
+
+/* Bind/unbind USB function hooks *******************************************/
+
+static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
+				    struct usb_descriptor_header *desc,
+				    void *priv)
+{
+	struct usb_endpoint_descriptor *ds = (void *)desc;
+	struct ffs_function *func = priv;
+	struct ffs_ep *ffs_ep;
+
+	/*
+	 * If hs_descriptors is not NULL then we are reading hs
+	 * descriptors now
+	 */
+	const int isHS = func->function.hs_descriptors != NULL;
+	unsigned idx;
+
+	if (type != FFS_DESCRIPTOR)
+		return 0;
+
+	if (isHS)
+		func->function.hs_descriptors[(long)valuep] = desc;
+	else
+		func->function.descriptors[(long)valuep]    = desc;
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return 0;
+
+	idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1;
+	ffs_ep = func->eps + idx;
+
+	if (unlikely(ffs_ep->descs[isHS])) {
+		pr_vdebug("two %sspeed descriptors for EP %d\n",
+			  isHS ? "high" : "full",
+			  ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		return -EINVAL;
+	}
+	ffs_ep->descs[isHS] = ds;
+
+	ffs_dump_mem(": Original  ep desc", ds, ds->bLength);
+	if (ffs_ep->ep) {
+		ds->bEndpointAddress = ffs_ep->descs[0]->bEndpointAddress;
+		if (!ds->wMaxPacketSize)
+			ds->wMaxPacketSize = ffs_ep->descs[0]->wMaxPacketSize;
+	} else {
+		struct usb_request *req;
+		struct usb_ep *ep;
+
+		pr_vdebug("autoconfig\n");
+		ep = usb_ep_autoconfig(func->gadget, ds);
+		if (unlikely(!ep))
+			return -ENOTSUPP;
+		ep->driver_data = func->eps + idx;
+
+		req = usb_ep_alloc_request(ep, GFP_KERNEL);
+		if (unlikely(!req))
+			return -ENOMEM;
+
+		ffs_ep->ep  = ep;
+		ffs_ep->req = req;
+		func->eps_revmap[ds->bEndpointAddress &
+				 USB_ENDPOINT_NUMBER_MASK] = idx + 1;
+	}
+	ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength);
+
+	return 0;
+}
+
+static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv)
+{
+	struct ffs_function *func = priv;
+	unsigned idx;
+	u8 newValue;
+
+	switch (type) {
+	default:
+	case FFS_DESCRIPTOR:
+		/* Handled in previous pass by __ffs_func_bind_do_descs() */
+		return 0;
+
+	case FFS_INTERFACE:
+		idx = *valuep;
+		if (func->interfaces_nums[idx] < 0) {
+			int id = usb_interface_id(func->conf, &func->function);
+			if (unlikely(id < 0))
+				return id;
+			func->interfaces_nums[idx] = id;
+		}
+		newValue = func->interfaces_nums[idx];
+		break;
+
+	case FFS_STRING:
+		/* String' IDs are allocated when fsf_data is bound to cdev */
+		newValue = func->ffs->stringtabs[0]->strings[*valuep - 1].id;
+		break;
+
+	case FFS_ENDPOINT:
+		/*
+		 * USB_DT_ENDPOINT are handled in
+		 * __ffs_func_bind_do_descs().
+		 */
+		if (desc->bDescriptorType == USB_DT_ENDPOINT)
+			return 0;
+
+		idx = (*valuep & USB_ENDPOINT_NUMBER_MASK) - 1;
+		if (unlikely(!func->eps[idx].ep))
+			return -EINVAL;
+
+		{
+			struct usb_endpoint_descriptor **descs;
+			descs = func->eps[idx].descs;
+			newValue = descs[descs[0] ? 0 : 1]->bEndpointAddress;
+		}
+		break;
+	}
+
+	pr_vdebug("%02x -> %02x\n", *valuep, newValue);
+	*valuep = newValue;
+	return 0;
+}
+
+static int ffs_func_bind(struct usb_configuration *c,
+			 struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+
+	const int full = !!func->ffs->fs_descs_count;
+	const int high = gadget_is_dualspeed(func->gadget) &&
+		func->ffs->hs_descs_count;
+
+	int ret;
+
+	/* Make it a single chunk, less management later on */
+	struct {
+		struct ffs_ep eps[ffs->eps_count];
+		struct usb_descriptor_header
+			*fs_descs[full ? ffs->fs_descs_count + 1 : 0];
+		struct usb_descriptor_header
+			*hs_descs[high ? ffs->hs_descs_count + 1 : 0];
+		short inums[ffs->interfaces_count];
+		char raw_descs[high ? ffs->raw_descs_length
+				    : ffs->raw_fs_descs_length];
+	} *data;
+
+	ENTER();
+
+	/* Only high speed but not supported by gadget? */
+	if (unlikely(!(full | high)))
+		return -ENOTSUPP;
+
+	/* Allocate */
+	data = kmalloc(sizeof *data, GFP_KERNEL);
+	if (unlikely(!data))
+		return -ENOMEM;
+
+	/* Zero */
+	memset(data->eps, 0, sizeof data->eps);
+	memcpy(data->raw_descs, ffs->raw_descs + 16, sizeof data->raw_descs);
+	memset(data->inums, 0xff, sizeof data->inums);
+	for (ret = ffs->eps_count; ret; --ret)
+		data->eps[ret].num = -1;
+
+	/* Save pointers */
+	func->eps             = data->eps;
+	func->interfaces_nums = data->inums;
+
+	/*
+	 * Go through all the endpoint descriptors and allocate
+	 * endpoints first, so that later we can rewrite the endpoint
+	 * numbers without worrying that it may be described later on.
+	 */
+	if (likely(full)) {
+		func->function.descriptors = data->fs_descs;
+		ret = ffs_do_descs(ffs->fs_descs_count,
+				   data->raw_descs,
+				   sizeof data->raw_descs,
+				   __ffs_func_bind_do_descs, func);
+		if (unlikely(ret < 0))
+			goto error;
+	} else {
+		ret = 0;
+	}
+
+	if (likely(high)) {
+		func->function.hs_descriptors = data->hs_descs;
+		ret = ffs_do_descs(ffs->hs_descs_count,
+				   data->raw_descs + ret,
+				   (sizeof data->raw_descs) - ret,
+				   __ffs_func_bind_do_descs, func);
+	}
+
+	/*
+	 * Now handle interface numbers allocation and interface and
+	 * endpoint numbers rewriting.  We can do that in one go
+	 * now.
+	 */
+	ret = ffs_do_descs(ffs->fs_descs_count +
+			   (high ? ffs->hs_descs_count : 0),
+			   data->raw_descs, sizeof data->raw_descs,
+			   __ffs_func_bind_do_nums, func);
+	if (unlikely(ret < 0))
+		goto error;
+
+	/* And we're done */
+	ffs_event_add(ffs, FUNCTIONFS_BIND);
+	return 0;
+
+error:
+	/* XXX Do we need to release all claimed endpoints here? */
+	return ret;
+}
+
+
+/* Other USB function hooks *************************************************/
+
+static void ffs_func_unbind(struct usb_configuration *c,
+			    struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+
+	ENTER();
+
+	if (ffs->func == func) {
+		ffs_func_eps_disable(func);
+		ffs->func = NULL;
+	}
+
+	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
+
+	ffs_func_free(func);
+}
+
+static int ffs_func_set_alt(struct usb_function *f,
+			    unsigned interface, unsigned alt)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	int ret = 0, intf;
+
+	if (alt != (unsigned)-1) {
+		intf = ffs_func_revmap_intf(func, interface);
+		if (unlikely(intf < 0))
+			return intf;
+	}
+
+	if (ffs->func)
+		ffs_func_eps_disable(ffs->func);
+
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	if (alt == (unsigned)-1) {
+		ffs->func = NULL;
+		ffs_event_add(ffs, FUNCTIONFS_DISABLE);
+		return 0;
+	}
+
+	ffs->func = func;
+	ret = ffs_func_eps_enable(func);
+	if (likely(ret >= 0))
+		ffs_event_add(ffs, FUNCTIONFS_ENABLE);
+	return ret;
+}
+
+static void ffs_func_disable(struct usb_function *f)
+{
+	ffs_func_set_alt(f, 0, (unsigned)-1);
+}
+
+static int ffs_func_setup(struct usb_function *f,
+			  const struct usb_ctrlrequest *creq)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	unsigned long flags;
+	int ret;
+
+	ENTER();
+
+	pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType);
+	pr_vdebug("creq->bRequest     = %02x\n", creq->bRequest);
+	pr_vdebug("creq->wValue       = %04x\n", le16_to_cpu(creq->wValue));
+	pr_vdebug("creq->wIndex       = %04x\n", le16_to_cpu(creq->wIndex));
+	pr_vdebug("creq->wLength      = %04x\n", le16_to_cpu(creq->wLength));
+
+	/*
+	 * Most requests directed to interface go through here
+	 * (notable exceptions are set/get interface) so we need to
+	 * handle them.  All other either handled by composite or
+	 * passed to usb_configuration->setup() (if one is set).  No
+	 * matter, we will handle requests directed to endpoint here
+	 * as well (as it's straightforward) but what to do with any
+	 * other request?
+	 */
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	switch (creq->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		ret = ffs_func_revmap_intf(func, le16_to_cpu(creq->wIndex));
+		if (unlikely(ret < 0))
+			return ret;
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex));
+		if (unlikely(ret < 0))
+			return ret;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	ffs->ev.setup = *creq;
+	ffs->ev.setup.wIndex = cpu_to_le16(ret);
+	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+
+	return 0;
+}
+
+static void ffs_func_suspend(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_SUSPEND);
+}
+
+static void ffs_func_resume(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_RESUME);
+}
+
+
+/* Endpoint and interface numbers reverse mapping ***************************/
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num)
+{
+	num = func->eps_revmap[num & USB_ENDPOINT_NUMBER_MASK];
+	return num ? num : -EDOM;
+}
+
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf)
+{
+	short *nums = func->interfaces_nums;
+	unsigned count = func->ffs->interfaces_count;
+
+	for (; count; --count, ++nums) {
+		if (*nums >= 0 && *nums == intf)
+			return nums - func->interfaces_nums;
+	}
+
+	return -EDOM;
+}
+
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+{
+	return nonblock
+		? likely(mutex_trylock(mutex)) ? 0 : -EAGAIN
+		: mutex_lock_interruptible(mutex);
+}
+
+static char *ffs_prepare_buffer(const char * __user buf, size_t len)
+{
+	char *data;
+
+	if (unlikely(!len))
+		return NULL;
+
+	data = kmalloc(len, GFP_KERNEL);
+	if (unlikely(!data))
+		return ERR_PTR(-ENOMEM);
+
+	if (unlikely(__copy_from_user(data, buf, len))) {
+		kfree(data);
+		return ERR_PTR(-EFAULT);
+	}
+
+	pr_vdebug("Buffer from user space:\n");
+	ffs_dump_mem("", data, len);
+
+	return data;
+}
diff --git a/drivers/staging/ccg/f_mass_storage.c b/drivers/staging/ccg/f_mass_storage.c
new file mode 100644
index 000000000000..4f1142efa6d1
--- /dev/null
+++ b/drivers/staging/ccg/f_mass_storage.c
@@ -0,0 +1,3135 @@
+/*
+ * f_mass_storage.c -- Mass Storage USB Composite Function
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyright (C) 2009 Samsung Electronics
+ *                    Author: Michal Nazarewicz <mina86@mina86.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * The Mass Storage Function acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive or as a CD-ROM drive.  In
+ * addition to providing an example of a genuinely useful composite
+ * function for a USB device, it also illustrates a technique of
+ * double-buffering for increased throughput.
+ *
+ * For more information about MSF and in particular its module
+ * parameters and sysfs interface read the
+ * <Documentation/usb/mass-storage.txt> file.
+ */
+
+/*
+ * MSF is configured by specifying a fsg_config structure.  It has the
+ * following fields:
+ *
+ *	nluns		Number of LUNs function have (anywhere from 1
+ *				to FSG_MAX_LUNS which is 8).
+ *	luns		An array of LUN configuration values.  This
+ *				should be filled for each LUN that
+ *				function will include (ie. for "nluns"
+ *				LUNs).  Each element of the array has
+ *				the following fields:
+ *	->filename	The path to the backing file for the LUN.
+ *				Required if LUN is not marked as
+ *				removable.
+ *	->ro		Flag specifying access to the LUN shall be
+ *				read-only.  This is implied if CD-ROM
+ *				emulation is enabled as well as when
+ *				it was impossible to open "filename"
+ *				in R/W mode.
+ *	->removable	Flag specifying that LUN shall be indicated as
+ *				being removable.
+ *	->cdrom		Flag specifying that LUN shall be reported as
+ *				being a CD-ROM.
+ *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
+ *				commands for this LUN shall be ignored.
+ *
+ *	vendor_name
+ *	product_name
+ *	release		Information used as a reply to INQUIRY
+ *				request.  To use default set to NULL,
+ *				NULL, 0xffff respectively.  The first
+ *				field should be 8 and the second 16
+ *				characters or less.
+ *
+ *	can_stall	Set to permit function to halt bulk endpoints.
+ *				Disabled on some USB devices known not
+ *				to work correctly.  You should set it
+ *				to true.
+ *
+ * If "removable" is not set for a LUN then a backing file must be
+ * specified.  If it is set, then NULL filename means the LUN's medium
+ * is not loaded (an empty string as "filename" in the fsg_config
+ * structure causes error).  The CD-ROM emulation includes a single
+ * data track and no audio tracks; hence there need be only one
+ * backing file per LUN.
+ *
+ * This function is heavily based on "File-backed Storage Gadget" by
+ * Alan Stern which in turn is heavily based on "Gadget Zero" by David
+ * Brownell.  The driver's SCSI command interface was based on the
+ * "Information technology - Small Computer System Interface - 2"
+ * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
+ * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
+ * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
+ * was based on the "Universal Serial Bus Mass Storage Class UFI
+ * Command Specification" document, Revision 1.0, December 14, 1998,
+ * available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
+ */
+
+/*
+ *				Driver Design
+ *
+ * The MSF is fairly straightforward.  There is a main kernel
+ * thread that handles most of the work.  Interrupt routines field
+ * callbacks from the controller driver: bulk- and interrupt-request
+ * completion notifications, endpoint-0 events, and disconnect events.
+ * Completion events are passed to the main thread by wakeup calls.  Many
+ * ep0 requests are handled at interrupt time, but SetInterface,
+ * SetConfiguration, and device reset requests are forwarded to the
+ * thread in the form of "exceptions" using SIGUSR1 signals (since they
+ * should interrupt any ongoing file I/O operations).
+ *
+ * The thread's main routine implements the standard command/data/status
+ * parts of a SCSI interaction.  It and its subroutines are full of tests
+ * for pending signals/exceptions -- all this polling is necessary since
+ * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
+ * indication that the driver really wants to be running in userspace.)
+ * An important point is that so long as the thread is alive it keeps an
+ * open reference to the backing file.  This will prevent unmounting
+ * the backing file's underlying filesystem and could cause problems
+ * during system shutdown, for example.  To prevent such problems, the
+ * thread catches INT, TERM, and KILL signals and converts them into
+ * an EXIT exception.
+ *
+ * In normal operation the main thread is started during the gadget's
+ * fsg_bind() callback and stopped during fsg_unbind().  But it can
+ * also exit when it receives a signal, and there's no point leaving
+ * the gadget running when the thread is dead.  As of this moment, MSF
+ * provides no way to deregister the gadget when thread dies -- maybe
+ * a callback functions is needed.
+ *
+ * To provide maximum throughput, the driver uses a circular pipeline of
+ * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
+ * arbitrarily long; in practice the benefits don't justify having more
+ * than 2 stages (i.e., double buffering).  But it helps to think of the
+ * pipeline as being a long one.  Each buffer head contains a bulk-in and
+ * a bulk-out request pointer (since the buffer can be used for both
+ * output and input -- directions always are given from the host's
+ * point of view) as well as a pointer to the buffer and various state
+ * variables.
+ *
+ * Use of the pipeline follows a simple protocol.  There is a variable
+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
+ * At any time that buffer head may still be in use from an earlier
+ * request, so each buffer head has a state variable indicating whether
+ * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
+ * buffer head to be EMPTY, filling the buffer either by file I/O or by
+ * USB I/O (during which the buffer head is BUSY), and marking the buffer
+ * head FULL when the I/O is complete.  Then the buffer will be emptied
+ * (again possibly by USB I/O, during which it is marked BUSY) and
+ * finally marked EMPTY again (possibly by a completion routine).
+ *
+ * A module parameter tells the driver to avoid stalling the bulk
+ * endpoints wherever the transport specification allows.  This is
+ * necessary for some UDCs like the SuperH, which cannot reliably clear a
+ * halt on a bulk endpoint.  However, under certain circumstances the
+ * Bulk-only specification requires a stall.  In such cases the driver
+ * will halt the endpoint and set a flag indicating that it should clear
+ * the halt in software during the next device reset.  Hopefully this
+ * will permit everything to work correctly.  Furthermore, although the
+ * specification allows the bulk-out endpoint to halt when the host sends
+ * too much data, implementing this would cause an unavoidable race.
+ * The driver will always use the "no-stall" approach for OUT transfers.
+ *
+ * One subtle point concerns sending status-stage responses for ep0
+ * requests.  Some of these requests, such as device reset, can involve
+ * interrupting an ongoing file I/O operation, which might take an
+ * arbitrarily long time.  During that delay the host might give up on
+ * the original ep0 request and issue a new one.  When that happens the
+ * driver should not notify the host about completion of the original
+ * request, as the host will no longer be waiting for it.  So the driver
+ * assigns to each ep0 request a unique tag, and it keeps track of the
+ * tag value of the request associated with a long-running exception
+ * (device-reset, interface-change, or configuration-change).  When the
+ * exception handler is finished, the status-stage response is submitted
+ * only if the current ep0 request tag is equal to the exception request
+ * tag.  Thus only the most recently received ep0 request will get a
+ * status-stage response.
+ *
+ * Warning: This driver source file is too long.  It ought to be split up
+ * into a header file plus about 3 separate .c files, to handle the details
+ * of the Gadget, USB Mass Storage, and SCSI protocols.
+ */
+
+
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
+
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/dcache.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kref.h>
+#include <linux/kthread.h>
+#include <linux/limits.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/freezer.h>
+#include <linux/utsname.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+
+#include "gadget_chips.h"
+
+
+/*------------------------------------------------------------------------*/
+
+#define FSG_DRIVER_DESC		"Mass Storage Function"
+#define FSG_DRIVER_VERSION	"2009/09/11"
+
+static const char fsg_string_interface[] = "Mass Storage";
+
+#define FSG_NO_DEVICE_STRINGS    1
+#define FSG_NO_OTG               1
+#define FSG_NO_INTR_EP           1
+
+#include "storage_common.c"
+
+
+/*-------------------------------------------------------------------------*/
+
+struct fsg_dev;
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+	/*
+	 * Callback function to call when thread exits.  If no
+	 * callback is set or it returns value lower then zero MSF
+	 * will force eject all LUNs it operates on (including those
+	 * marked as non-removable or with prevent_medium_removal flag
+	 * set).
+	 */
+	int (*thread_exits)(struct fsg_common *common);
+
+	/*
+	 * Called prior to ejection.  Negative return means error,
+	 * zero means to continue with ejection, positive means not to
+	 * eject.
+	 */
+	int (*pre_eject)(struct fsg_common *common,
+			 struct fsg_lun *lun, int num);
+	/*
+	 * Called after ejection.  Negative return means error, zero
+	 * or positive is just a success.
+	 */
+	int (*post_eject)(struct fsg_common *common,
+			  struct fsg_lun *lun, int num);
+};
+
+/* Data shared by all the FSG instances. */
+struct fsg_common {
+	struct usb_gadget	*gadget;
+	struct usb_composite_dev *cdev;
+	struct fsg_dev		*fsg, *new_fsg;
+	wait_queue_head_t	fsg_wait;
+
+	/* filesem protects: backing files in use */
+	struct rw_semaphore	filesem;
+
+	/* lock protects: state, all the req_busy's */
+	spinlock_t		lock;
+
+	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
+	struct usb_request	*ep0req;	/* Copy of cdev->req */
+	unsigned int		ep0_req_tag;
+
+	struct fsg_buffhd	*next_buffhd_to_fill;
+	struct fsg_buffhd	*next_buffhd_to_drain;
+	struct fsg_buffhd	*buffhds;
+
+	int			cmnd_size;
+	u8			cmnd[MAX_COMMAND_SIZE];
+
+	unsigned int		nluns;
+	unsigned int		lun;
+	struct fsg_lun		*luns;
+	struct fsg_lun		*curlun;
+
+	unsigned int		bulk_out_maxpacket;
+	enum fsg_state		state;		/* For exception handling */
+	unsigned int		exception_req_tag;
+
+	enum data_direction	data_dir;
+	u32			data_size;
+	u32			data_size_from_cmnd;
+	u32			tag;
+	u32			residue;
+	u32			usb_amount_left;
+
+	unsigned int		can_stall:1;
+	unsigned int		free_storage_on_release:1;
+	unsigned int		phase_error:1;
+	unsigned int		short_packet_received:1;
+	unsigned int		bad_lun_okay:1;
+	unsigned int		running:1;
+
+	int			thread_wakeup_needed;
+	struct completion	thread_notifier;
+	struct task_struct	*thread_task;
+
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
+	/* Gadget's private data. */
+	void			*private_data;
+
+	/*
+	 * Vendor (8 chars), product (16 chars), release (4
+	 * hexadecimal digits) and NUL byte
+	 */
+	char inquiry_string[8 + 16 + 4 + 1];
+
+	struct kref		ref;
+};
+
+struct fsg_config {
+	unsigned nluns;
+	struct fsg_lun_config {
+		const char *filename;
+		char ro;
+		char removable;
+		char cdrom;
+		char nofua;
+	} luns[FSG_MAX_LUNS];
+
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
+	/* Gadget's private data. */
+	void			*private_data;
+
+	const char *vendor_name;		/*  8 characters or less */
+	const char *product_name;		/* 16 characters or less */
+	u16 release;
+
+	char			can_stall;
+};
+
+struct fsg_dev {
+	struct usb_function	function;
+	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
+	struct fsg_common	*common;
+
+	u16			interface_number;
+
+	unsigned int		bulk_in_enabled:1;
+	unsigned int		bulk_out_enabled:1;
+
+	unsigned long		atomic_bitflags;
+#define IGNORE_BULK_OUT		0
+
+	struct usb_ep		*bulk_in;
+	struct usb_ep		*bulk_out;
+};
+
+static inline int __fsg_is_set(struct fsg_common *common,
+			       const char *func, unsigned line)
+{
+	if (common->fsg)
+		return 1;
+	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+	WARN_ON(1);
+	return 0;
+}
+
+#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
+
+static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
+{
+	return container_of(f, struct fsg_dev, function);
+}
+
+typedef void (*fsg_routine_t)(struct fsg_dev *);
+
+static int exception_in_progress(struct fsg_common *common)
+{
+	return common->state > FSG_STATE_IDLE;
+}
+
+/* Make bulk-out requests be divisible by the maxpacket size */
+static void set_bulk_out_req_length(struct fsg_common *common,
+				    struct fsg_buffhd *bh, unsigned int length)
+{
+	unsigned int	rem;
+
+	bh->bulk_out_intended_length = length;
+	rem = length % common->bulk_out_maxpacket;
+	if (rem > 0)
+		length += common->bulk_out_maxpacket - rem;
+	bh->outreq->length = length;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
+{
+	const char	*name;
+
+	if (ep == fsg->bulk_in)
+		name = "bulk-in";
+	else if (ep == fsg->bulk_out)
+		name = "bulk-out";
+	else
+		name = ep->name;
+	DBG(fsg, "%s set halt\n", name);
+	return usb_ep_set_halt(ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* These routines may be called in process context or in_irq */
+
+/* Caller must hold fsg->lock */
+static void wakeup_thread(struct fsg_common *common)
+{
+	/* Tell the main thread that something has happened */
+	common->thread_wakeup_needed = 1;
+	if (common->thread_task)
+		wake_up_process(common->thread_task);
+}
+
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+{
+	unsigned long		flags;
+
+	/*
+	 * Do nothing if a higher-priority exception is already in progress.
+	 * If a lower-or-equal priority exception is in progress, preempt it
+	 * and notify the main thread by sending it a signal.
+	 */
+	spin_lock_irqsave(&common->lock, flags);
+	if (common->state <= new_state) {
+		common->exception_req_tag = common->ep0_req_tag;
+		common->state = new_state;
+		if (common->thread_task)
+			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
+				      common->thread_task);
+	}
+	spin_unlock_irqrestore(&common->lock, flags);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int ep0_queue(struct fsg_common *common)
+{
+	int	rc;
+
+	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
+	common->ep0->driver_data = common;
+	if (rc != 0 && rc != -ESHUTDOWN) {
+		/* We can't do much more than wait for a reset */
+		WARNING(common, "error in submission: %s --> %d\n",
+			common->ep0->name, rc);
+	}
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Completion handlers. These always run in_irq. */
+
+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct fsg_common	*common = ep->driver_data;
+	struct fsg_buffhd	*bh = req->context;
+
+	if (req->status || req->actual != req->length)
+		DBG(common, "%s --> %d, %u/%u\n", __func__,
+		    req->status, req->actual, req->length);
+	if (req->status == -ECONNRESET)		/* Request was cancelled */
+		usb_ep_fifo_flush(ep);
+
+	/* Hold the lock while we update the request and buffer states */
+	smp_wmb();
+	spin_lock(&common->lock);
+	bh->inreq_busy = 0;
+	bh->state = BUF_STATE_EMPTY;
+	wakeup_thread(common);
+	spin_unlock(&common->lock);
+}
+
+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct fsg_common	*common = ep->driver_data;
+	struct fsg_buffhd	*bh = req->context;
+
+	dump_msg(common, "bulk-out", req->buf, req->actual);
+	if (req->status || req->actual != bh->bulk_out_intended_length)
+		DBG(common, "%s --> %d, %u/%u\n", __func__,
+		    req->status, req->actual, bh->bulk_out_intended_length);
+	if (req->status == -ECONNRESET)		/* Request was cancelled */
+		usb_ep_fifo_flush(ep);
+
+	/* Hold the lock while we update the request and buffer states */
+	smp_wmb();
+	spin_lock(&common->lock);
+	bh->outreq_busy = 0;
+	bh->state = BUF_STATE_FULL;
+	wakeup_thread(common);
+	spin_unlock(&common->lock);
+}
+
+static int fsg_setup(struct usb_function *f,
+		     const struct usb_ctrlrequest *ctrl)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct usb_request	*req = fsg->common->ep0req;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if (!fsg_is_set(fsg->common))
+		return -EOPNOTSUPP;
+
+	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
+	req->context = NULL;
+	req->length = 0;
+	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
+
+	switch (ctrl->bRequest) {
+
+	case US_BULK_RESET_REQUEST:
+		if (ctrl->bRequestType !=
+		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+			break;
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 0)
+			return -EDOM;
+
+		/*
+		 * Raise an exception to stop the current operation
+		 * and reinitialize our state.
+		 */
+		DBG(fsg, "bulk reset request\n");
+		raise_exception(fsg->common, FSG_STATE_RESET);
+		return DELAYED_STATUS;
+
+	case US_BULK_GET_MAX_LUN:
+		if (ctrl->bRequestType !=
+		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+			break;
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 1)
+			return -EDOM;
+		VDBG(fsg, "get max LUN\n");
+		*(u8 *)req->buf = fsg->common->nluns - 1;
+
+		/* Respond with data/status */
+		req->length = min((u16)1, w_length);
+		return ep0_queue(fsg->common);
+	}
+
+	VDBG(fsg,
+	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
+	     ctrl->bRequestType, ctrl->bRequest,
+	     le16_to_cpu(ctrl->wValue), w_index, w_length);
+	return -EOPNOTSUPP;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* All the following routines run in process context */
+
+/* Use this for bulk or interrupt transfers, not ep0 */
+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
+			   struct usb_request *req, int *pbusy,
+			   enum fsg_buffer_state *state)
+{
+	int	rc;
+
+	if (ep == fsg->bulk_in)
+		dump_msg(fsg, "bulk-in", req->buf, req->length);
+
+	spin_lock_irq(&fsg->common->lock);
+	*pbusy = 1;
+	*state = BUF_STATE_BUSY;
+	spin_unlock_irq(&fsg->common->lock);
+	rc = usb_ep_queue(ep, req, GFP_KERNEL);
+	if (rc != 0) {
+		*pbusy = 0;
+		*state = BUF_STATE_EMPTY;
+
+		/* We can't do much more than wait for a reset */
+
+		/*
+		 * Note: currently the net2280 driver fails zero-length
+		 * submissions if DMA is enabled.
+		 */
+		if (rc != -ESHUTDOWN &&
+		    !(rc == -EOPNOTSUPP && req->length == 0))
+			WARNING(fsg, "error in submission: %s --> %d\n",
+				ep->name, rc);
+	}
+}
+
+static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_in,
+		       bh->inreq, &bh->inreq_busy, &bh->state);
+	return true;
+}
+
+static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_out,
+		       bh->outreq, &bh->outreq_busy, &bh->state);
+	return true;
+}
+
+static int sleep_thread(struct fsg_common *common)
+{
+	int	rc = 0;
+
+	/* Wait until a signal arrives or we are woken up */
+	for (;;) {
+		try_to_freeze();
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (signal_pending(current)) {
+			rc = -EINTR;
+			break;
+		}
+		if (common->thread_wakeup_needed)
+			break;
+		schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+	common->thread_wakeup_needed = 0;
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_read(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u32			lba;
+	struct fsg_buffhd	*bh;
+	int			rc;
+	u32			amount_left;
+	loff_t			file_offset, file_offset_tmp;
+	unsigned int		amount;
+	ssize_t			nread;
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
+	if (common->cmnd[0] == READ_6)
+		lba = get_unaligned_be24(&common->cmnd[1]);
+	else {
+		lba = get_unaligned_be32(&common->cmnd[2]);
+
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
+		 * cache) and FUA (Force Unit Access = don't read from the
+		 * cache), but we don't implement them.
+		 */
+		if ((common->cmnd[1] & ~0x18) != 0) {
+			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+	file_offset = ((loff_t) lba) << curlun->blkbits;
+
+	/* Carry out the file reads */
+	amount_left = common->data_size_from_cmnd;
+	if (unlikely(amount_left == 0))
+		return -EIO;		/* No default reply */
+
+	for (;;) {
+		/*
+		 * Figure out how much we need to read:
+		 * Try to read the remaining amount.
+		 * But don't read more than the buffer size.
+		 * And don't try to read past the end of the file.
+		 */
+		amount = min(amount_left, FSG_BUFLEN);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
+
+		/* Wait for the next buffer to become available */
+		bh = common->next_buffhd_to_fill;
+		while (bh->state != BUF_STATE_EMPTY) {
+			rc = sleep_thread(common);
+			if (rc)
+				return rc;
+		}
+
+		/*
+		 * If we were asked to read past the end of file,
+		 * end with an empty buffer.
+		 */
+		if (amount == 0) {
+			curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			bh->inreq->length = 0;
+			bh->state = BUF_STATE_FULL;
+			break;
+		}
+
+		/* Perform the read */
+		file_offset_tmp = file_offset;
+		nread = vfs_read(curlun->filp,
+				 (char __user *)bh->buf,
+				 amount, &file_offset_tmp);
+		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+		      (unsigned long long)file_offset, (int)nread);
+		if (signal_pending(current))
+			return -EINTR;
+
+		if (nread < 0) {
+			LDBG(curlun, "error in file read: %d\n", (int)nread);
+			nread = 0;
+		} else if (nread < amount) {
+			LDBG(curlun, "partial file read: %d/%u\n",
+			     (int)nread, amount);
+			nread = round_down(nread, curlun->blksize);
+		}
+		file_offset  += nread;
+		amount_left  -= nread;
+		common->residue -= nread;
+
+		/*
+		 * Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
+		bh->inreq->length = nread;
+		bh->state = BUF_STATE_FULL;
+
+		/* If an error occurred, report it and its position */
+		if (nread < amount) {
+			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+		if (amount_left == 0)
+			break;		/* No more left to read */
+
+		/* Send this buffer and go read some more */
+		bh->inreq->zero = 0;
+		if (!start_in_transfer(common, bh))
+			/* Don't know what to do if common->fsg is NULL */
+			return -EIO;
+		common->next_buffhd_to_fill = bh->next;
+	}
+
+	return -EIO;		/* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_write(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u32			lba;
+	struct fsg_buffhd	*bh;
+	int			get_some_more;
+	u32			amount_left_to_req, amount_left_to_write;
+	loff_t			usb_offset, file_offset, file_offset_tmp;
+	unsigned int		amount;
+	ssize_t			nwritten;
+	int			rc;
+
+	if (curlun->ro) {
+		curlun->sense_data = SS_WRITE_PROTECTED;
+		return -EINVAL;
+	}
+	spin_lock(&curlun->filp->f_lock);
+	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
+	spin_unlock(&curlun->filp->f_lock);
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big
+	 */
+	if (common->cmnd[0] == WRITE_6)
+		lba = get_unaligned_be24(&common->cmnd[1]);
+	else {
+		lba = get_unaligned_be32(&common->cmnd[2]);
+
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
+		 * cache) and FUA (Force Unit Access = write directly to the
+		 * medium).  We don't implement DPO; we implement FUA by
+		 * performing synchronous output.
+		 */
+		if (common->cmnd[1] & ~0x18) {
+			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
+			spin_lock(&curlun->filp->f_lock);
+			curlun->filp->f_flags |= O_SYNC;
+			spin_unlock(&curlun->filp->f_lock);
+		}
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	/* Carry out the file writes */
+	get_some_more = 1;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
+	amount_left_to_req = common->data_size_from_cmnd;
+	amount_left_to_write = common->data_size_from_cmnd;
+
+	while (amount_left_to_write > 0) {
+
+		/* Queue a request for more data from the host */
+		bh = common->next_buffhd_to_fill;
+		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
+
+			/*
+			 * Figure out how much we want to get:
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
+			 */
+			amount = min(amount_left_to_req, FSG_BUFLEN);
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
+				get_some_more = 0;
+				curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+				curlun->sense_data_info =
+					usb_offset >> curlun->blkbits;
+				curlun->info_valid = 1;
+				continue;
+			}
+
+			/* Get the next buffer */
+			usb_offset += amount;
+			common->usb_amount_left -= amount;
+			amount_left_to_req -= amount;
+			if (amount_left_to_req == 0)
+				get_some_more = 0;
+
+			/*
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(common, bh, amount);
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
+				return -EIO;
+			common->next_buffhd_to_fill = bh->next;
+			continue;
+		}
+
+		/* Write the received data to the backing file */
+		bh = common->next_buffhd_to_drain;
+		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
+			break;			/* We stopped early */
+		if (bh->state == BUF_STATE_FULL) {
+			smp_rmb();
+			common->next_buffhd_to_drain = bh->next;
+			bh->state = BUF_STATE_EMPTY;
+
+			/* Did something go wrong with the transfer? */
+			if (bh->outreq->status != 0) {
+				curlun->sense_data = SS_COMMUNICATION_FAILURE;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+				curlun->info_valid = 1;
+				break;
+			}
+
+			amount = bh->outreq->actual;
+			if (curlun->file_length - file_offset < amount) {
+				LERROR(curlun,
+				       "write %u @ %llu beyond end %llu\n",
+				       amount, (unsigned long long)file_offset,
+				       (unsigned long long)curlun->file_length);
+				amount = curlun->file_length - file_offset;
+			}
+
+			/* Don't accept excess data.  The spec doesn't say
+			 * what to do in this case.  We'll ignore the error.
+			 */
+			amount = min(amount, bh->bulk_out_intended_length);
+
+			/* Don't write a partial block */
+			amount = round_down(amount, curlun->blksize);
+			if (amount == 0)
+				goto empty_write;
+
+			/* Perform the write */
+			file_offset_tmp = file_offset;
+			nwritten = vfs_write(curlun->filp,
+					     (char __user *)bh->buf,
+					     amount, &file_offset_tmp);
+			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
+			      (unsigned long long)file_offset, (int)nwritten);
+			if (signal_pending(current))
+				return -EINTR;		/* Interrupted! */
+
+			if (nwritten < 0) {
+				LDBG(curlun, "error in file write: %d\n",
+				     (int)nwritten);
+				nwritten = 0;
+			} else if (nwritten < amount) {
+				LDBG(curlun, "partial file write: %d/%u\n",
+				     (int)nwritten, amount);
+				nwritten = round_down(nwritten, curlun->blksize);
+			}
+			file_offset += nwritten;
+			amount_left_to_write -= nwritten;
+			common->residue -= nwritten;
+
+			/* If an error occurred, report it and its position */
+			if (nwritten < amount) {
+				curlun->sense_data = SS_WRITE_ERROR;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
+				curlun->info_valid = 1;
+				break;
+			}
+
+ empty_write:
+			/* Did the host decide to stop early? */
+			if (bh->outreq->actual < bh->bulk_out_intended_length) {
+				common->short_packet_received = 1;
+				break;
+			}
+			continue;
+		}
+
+		/* Wait for something to happen */
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+
+	return -EIO;		/* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_synchronize_cache(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		rc;
+
+	/* We ignore the requested LBA and write out all file's
+	 * dirty data buffers. */
+	rc = fsg_lun_fsync_sub(curlun);
+	if (rc)
+		curlun->sense_data = SS_WRITE_ERROR;
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void invalidate_sub(struct fsg_lun *curlun)
+{
+	struct file	*filp = curlun->filp;
+	struct inode	*inode = filp->f_path.dentry->d_inode;
+	unsigned long	rc;
+
+	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
+	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
+}
+
+static int do_verify(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	u32			lba;
+	u32			verification_length;
+	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
+	loff_t			file_offset, file_offset_tmp;
+	u32			amount_left;
+	unsigned int		amount;
+	ssize_t			nread;
+
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
+	lba = get_unaligned_be32(&common->cmnd[2]);
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	/*
+	 * We allow DPO (Disable Page Out = don't save data in the
+	 * cache) but we don't implement it.
+	 */
+	if (common->cmnd[1] & ~0x10) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	verification_length = get_unaligned_be16(&common->cmnd[7]);
+	if (unlikely(verification_length == 0))
+		return -EIO;		/* No default reply */
+
+	/* Prepare to carry out the file verify */
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
+
+	/* Write out all the dirty buffers before invalidating them */
+	fsg_lun_fsync_sub(curlun);
+	if (signal_pending(current))
+		return -EINTR;
+
+	invalidate_sub(curlun);
+	if (signal_pending(current))
+		return -EINTR;
+
+	/* Just try to read the requested blocks */
+	while (amount_left > 0) {
+		/*
+		 * Figure out how much we need to read:
+		 * Try to read the remaining amount, but not more than
+		 * the buffer size.
+		 * And don't try to read past the end of the file.
+		 */
+		amount = min(amount_left, FSG_BUFLEN);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
+		if (amount == 0) {
+			curlun->sense_data =
+					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+
+		/* Perform the read */
+		file_offset_tmp = file_offset;
+		nread = vfs_read(curlun->filp,
+				(char __user *) bh->buf,
+				amount, &file_offset_tmp);
+		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+				(unsigned long long) file_offset,
+				(int) nread);
+		if (signal_pending(current))
+			return -EINTR;
+
+		if (nread < 0) {
+			LDBG(curlun, "error in file verify: %d\n", (int)nread);
+			nread = 0;
+		} else if (nread < amount) {
+			LDBG(curlun, "partial file verify: %d/%u\n",
+			     (int)nread, amount);
+			nread = round_down(nread, curlun->blksize);
+		}
+		if (nread == 0) {
+			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
+			curlun->info_valid = 1;
+			break;
+		}
+		file_offset += nread;
+		amount_left -= nread;
+	}
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun *curlun = common->curlun;
+	u8	*buf = (u8 *) bh->buf;
+
+	if (!curlun) {		/* Unsupported LUNs are okay */
+		common->bad_lun_okay = 1;
+		memset(buf, 0, 36);
+		buf[0] = 0x7f;		/* Unsupported, no device-type */
+		buf[4] = 31;		/* Additional length */
+		return 36;
+	}
+
+	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
+	buf[1] = curlun->removable ? 0x80 : 0;
+	buf[2] = 2;		/* ANSI SCSI level 2 */
+	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
+	buf[4] = 31;		/* Additional length */
+	buf[5] = 0;		/* No special options */
+	buf[6] = 0;
+	buf[7] = 0;
+	memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string);
+	return 36;
+}
+
+static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u8		*buf = (u8 *) bh->buf;
+	u32		sd, sdinfo;
+	int		valid;
+
+	/*
+	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
+	 *
+	 * If a REQUEST SENSE command is received from an initiator
+	 * with a pending unit attention condition (before the target
+	 * generates the contingent allegiance condition), then the
+	 * target shall either:
+	 *   a) report any pending sense data and preserve the unit
+	 *	attention condition on the logical unit, or,
+	 *   b) report the unit attention condition, may discard any
+	 *	pending sense data, and clear the unit attention
+	 *	condition on the logical unit for that initiator.
+	 *
+	 * FSG normally uses option a); enable this code to use option b).
+	 */
+#if 0
+	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
+		curlun->sense_data = curlun->unit_attention_data;
+		curlun->unit_attention_data = SS_NO_SENSE;
+	}
+#endif
+
+	if (!curlun) {		/* Unsupported LUNs are okay */
+		common->bad_lun_okay = 1;
+		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+		sdinfo = 0;
+		valid = 0;
+	} else {
+		sd = curlun->sense_data;
+		sdinfo = curlun->sense_data_info;
+		valid = curlun->info_valid << 7;
+		curlun->sense_data = SS_NO_SENSE;
+		curlun->sense_data_info = 0;
+		curlun->info_valid = 0;
+	}
+
+	memset(buf, 0, 18);
+	buf[0] = valid | 0x70;			/* Valid, current error */
+	buf[2] = SK(sd);
+	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
+	buf[7] = 18 - 8;			/* Additional sense length */
+	buf[12] = ASC(sd);
+	buf[13] = ASCQ(sd);
+	return 18;
+}
+
+static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u32		lba = get_unaligned_be32(&common->cmnd[2]);
+	int		pmi = common->cmnd[8];
+	u8		*buf = (u8 *)bh->buf;
+
+	/* Check the PMI and LBA fields */
+	if (pmi > 1 || (pmi == 0 && lba != 0)) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
+						/* Max logical block */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
+	return 8;
+}
+
+static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		msf = common->cmnd[1] & 0x02;
+	u32		lba = get_unaligned_be32(&common->cmnd[2]);
+	u8		*buf = (u8 *)bh->buf;
+
+	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+	if (lba >= curlun->num_sectors) {
+		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+		return -EINVAL;
+	}
+
+	memset(buf, 0, 8);
+	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
+	store_cdrom_address(&buf[4], msf, lba);
+	return 8;
+}
+
+static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		msf = common->cmnd[1] & 0x02;
+	int		start_track = common->cmnd[6];
+	u8		*buf = (u8 *)bh->buf;
+
+	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
+			start_track > 1) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	memset(buf, 0, 20);
+	buf[1] = (20-2);		/* TOC data length */
+	buf[2] = 1;			/* First track number */
+	buf[3] = 1;			/* Last track number */
+	buf[5] = 0x16;			/* Data track, copying allowed */
+	buf[6] = 0x01;			/* Only track is number 1 */
+	store_cdrom_address(&buf[8], msf, 0);
+
+	buf[13] = 0x16;			/* Lead-out track is data */
+	buf[14] = 0xAA;			/* Lead-out track number */
+	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
+	return 20;
+}
+
+static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		mscmnd = common->cmnd[0];
+	u8		*buf = (u8 *) bh->buf;
+	u8		*buf0 = buf;
+	int		pc, page_code;
+	int		changeable_values, all_pages;
+	int		valid_page = 0;
+	int		len, limit;
+
+	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+	pc = common->cmnd[2] >> 6;
+	page_code = common->cmnd[2] & 0x3f;
+	if (pc == 3) {
+		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
+		return -EINVAL;
+	}
+	changeable_values = (pc == 1);
+	all_pages = (page_code == 0x3f);
+
+	/*
+	 * Write the mode parameter header.  Fixed values are: default
+	 * medium type, no cache control (DPOFUA), and no block descriptors.
+	 * The only variable value is the WriteProtect bit.  We will fill in
+	 * the mode data length later.
+	 */
+	memset(buf, 0, 8);
+	if (mscmnd == MODE_SENSE) {
+		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
+		buf += 4;
+		limit = 255;
+	} else {			/* MODE_SENSE_10 */
+		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
+		buf += 8;
+		limit = 65535;		/* Should really be FSG_BUFLEN */
+	}
+
+	/* No block descriptors */
+
+	/*
+	 * The mode pages, in numerical order.  The only page we support
+	 * is the Caching page.
+	 */
+	if (page_code == 0x08 || all_pages) {
+		valid_page = 1;
+		buf[0] = 0x08;		/* Page code */
+		buf[1] = 10;		/* Page length */
+		memset(buf+2, 0, 10);	/* None of the fields are changeable */
+
+		if (!changeable_values) {
+			buf[2] = 0x04;	/* Write cache enable, */
+					/* Read cache not disabled */
+					/* No cache retention priorities */
+			put_unaligned_be16(0xffff, &buf[4]);
+					/* Don't disable prefetch */
+					/* Minimum prefetch = 0 */
+			put_unaligned_be16(0xffff, &buf[8]);
+					/* Maximum prefetch */
+			put_unaligned_be16(0xffff, &buf[10]);
+					/* Maximum prefetch ceiling */
+		}
+		buf += 12;
+	}
+
+	/*
+	 * Check that a valid page was requested and the mode data length
+	 * isn't too long.
+	 */
+	len = buf - buf0;
+	if (!valid_page || len > limit) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	/*  Store the mode data length */
+	if (mscmnd == MODE_SENSE)
+		buf0[0] = len - 1;
+	else
+		put_unaligned_be16(len - 2, buf0);
+	return len;
+}
+
+static int do_start_stop(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		loej, start;
+
+	if (!curlun) {
+		return -EINVAL;
+	} else if (!curlun->removable) {
+		curlun->sense_data = SS_INVALID_COMMAND;
+		return -EINVAL;
+	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
+		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	loej  = common->cmnd[4] & 0x02;
+	start = common->cmnd[4] & 0x01;
+
+	/*
+	 * Our emulation doesn't support mounting; the medium is
+	 * available for use as soon as it is loaded.
+	 */
+	if (start) {
+		if (!fsg_lun_is_open(curlun)) {
+			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+			return -EINVAL;
+		}
+		return 0;
+	}
+
+	/* Are we allowed to unload the media? */
+	if (curlun->prevent_medium_removal) {
+		LDBG(curlun, "unload attempt prevented\n");
+		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+		return -EINVAL;
+	}
+
+	if (!loej)
+		return 0;
+
+	/* Simulate an unload/eject */
+	if (common->ops && common->ops->pre_eject) {
+		int r = common->ops->pre_eject(common, curlun,
+					       curlun - common->luns);
+		if (unlikely(r < 0))
+			return r;
+		else if (r)
+			return 0;
+	}
+
+	up_read(&common->filesem);
+	down_write(&common->filesem);
+	fsg_lun_close(curlun);
+	up_write(&common->filesem);
+	down_read(&common->filesem);
+
+	return common->ops && common->ops->post_eject
+		? min(0, common->ops->post_eject(common, curlun,
+						 curlun - common->luns))
+		: 0;
+}
+
+static int do_prevent_allow(struct fsg_common *common)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	int		prevent;
+
+	if (!common->curlun) {
+		return -EINVAL;
+	} else if (!common->curlun->removable) {
+		common->curlun->sense_data = SS_INVALID_COMMAND;
+		return -EINVAL;
+	}
+
+	prevent = common->cmnd[4] & 0x01;
+	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	if (curlun->prevent_medium_removal && !prevent)
+		fsg_lun_fsync_sub(curlun);
+	curlun->prevent_medium_removal = prevent;
+	return 0;
+}
+
+static int do_read_format_capacities(struct fsg_common *common,
+			struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+	u8		*buf = (u8 *) bh->buf;
+
+	buf[0] = buf[1] = buf[2] = 0;
+	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
+	buf += 4;
+
+	put_unaligned_be32(curlun->num_sectors, &buf[0]);
+						/* Number of blocks */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
+	buf[4] = 0x02;				/* Current capacity */
+	return 12;
+}
+
+static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun	*curlun = common->curlun;
+
+	/* We don't support MODE SELECT */
+	if (curlun)
+		curlun->sense_data = SS_INVALID_COMMAND;
+	return -EINVAL;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+	int	rc;
+
+	rc = fsg_set_halt(fsg, fsg->bulk_in);
+	if (rc == -EAGAIN)
+		VDBG(fsg, "delayed bulk-in endpoint halt\n");
+	while (rc != 0) {
+		if (rc != -EAGAIN) {
+			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
+			rc = 0;
+			break;
+		}
+
+		/* Wait for a short time and then try again */
+		if (msleep_interruptible(100) != 0)
+			return -EINTR;
+		rc = usb_ep_set_halt(fsg->bulk_in);
+	}
+	return rc;
+}
+
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+	int	rc;
+
+	DBG(fsg, "bulk-in set wedge\n");
+	rc = usb_ep_set_wedge(fsg->bulk_in);
+	if (rc == -EAGAIN)
+		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+	while (rc != 0) {
+		if (rc != -EAGAIN) {
+			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
+			rc = 0;
+			break;
+		}
+
+		/* Wait for a short time and then try again */
+		if (msleep_interruptible(100) != 0)
+			return -EINTR;
+		rc = usb_ep_set_wedge(fsg->bulk_in);
+	}
+	return rc;
+}
+
+static int throw_away_data(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh;
+	u32			amount;
+	int			rc;
+
+	for (bh = common->next_buffhd_to_drain;
+	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
+	     bh = common->next_buffhd_to_drain) {
+
+		/* Throw away the data in a filled buffer */
+		if (bh->state == BUF_STATE_FULL) {
+			smp_rmb();
+			bh->state = BUF_STATE_EMPTY;
+			common->next_buffhd_to_drain = bh->next;
+
+			/* A short packet or an error ends everything */
+			if (bh->outreq->actual < bh->bulk_out_intended_length ||
+			    bh->outreq->status != 0) {
+				raise_exception(common,
+						FSG_STATE_ABORT_BULK_OUT);
+				return -EINTR;
+			}
+			continue;
+		}
+
+		/* Try to submit another request if we need one */
+		bh = common->next_buffhd_to_fill;
+		if (bh->state == BUF_STATE_EMPTY
+		 && common->usb_amount_left > 0) {
+			amount = min(common->usb_amount_left, FSG_BUFLEN);
+
+			/*
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(common, bh, amount);
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
+				return -EIO;
+			common->next_buffhd_to_fill = bh->next;
+			common->usb_amount_left -= amount;
+			continue;
+		}
+
+		/* Otherwise wait for something to happen */
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+static int finish_reply(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
+	int			rc = 0;
+
+	switch (common->data_dir) {
+	case DATA_DIR_NONE:
+		break;			/* Nothing to send */
+
+	/*
+	 * If we don't know whether the host wants to read or write,
+	 * this must be CB or CBI with an unknown command.  We mustn't
+	 * try to send or receive any data.  So stall both bulk pipes
+	 * if we can and wait for a reset.
+	 */
+	case DATA_DIR_UNKNOWN:
+		if (!common->can_stall) {
+			/* Nothing */
+		} else if (fsg_is_set(common)) {
+			fsg_set_halt(common->fsg, common->fsg->bulk_out);
+			rc = halt_bulk_in_endpoint(common->fsg);
+		} else {
+			/* Don't know what to do if common->fsg is NULL */
+			rc = -EIO;
+		}
+		break;
+
+	/* All but the last buffer of data must have already been sent */
+	case DATA_DIR_TO_HOST:
+		if (common->data_size == 0) {
+			/* Nothing to send */
+
+		/* Don't know what to do if common->fsg is NULL */
+		} else if (!fsg_is_set(common)) {
+			rc = -EIO;
+
+		/* If there's no residue, simply send the last buffer */
+		} else if (common->residue == 0) {
+			bh->inreq->zero = 0;
+			if (!start_in_transfer(common, bh))
+				return -EIO;
+			common->next_buffhd_to_fill = bh->next;
+
+		/*
+		 * For Bulk-only, mark the end of the data with a short
+		 * packet.  If we are allowed to stall, halt the bulk-in
+		 * endpoint.  (Note: This violates the Bulk-Only Transport
+		 * specification, which requires us to pad the data if we
+		 * don't halt the endpoint.  Presumably nobody will mind.)
+		 */
+		} else {
+			bh->inreq->zero = 1;
+			if (!start_in_transfer(common, bh))
+				rc = -EIO;
+			common->next_buffhd_to_fill = bh->next;
+			if (common->can_stall)
+				rc = halt_bulk_in_endpoint(common->fsg);
+		}
+		break;
+
+	/*
+	 * We have processed all we want from the data the host has sent.
+	 * There may still be outstanding bulk-out requests.
+	 */
+	case DATA_DIR_FROM_HOST:
+		if (common->residue == 0) {
+			/* Nothing to receive */
+
+		/* Did the host stop sending unexpectedly early? */
+		} else if (common->short_packet_received) {
+			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+			rc = -EINTR;
+
+		/*
+		 * We haven't processed all the incoming data.  Even though
+		 * we may be allowed to stall, doing so would cause a race.
+		 * The controller may already have ACK'ed all the remaining
+		 * bulk-out packets, in which case the host wouldn't see a
+		 * STALL.  Not realizing the endpoint was halted, it wouldn't
+		 * clear the halt -- leading to problems later on.
+		 */
+#if 0
+		} else if (common->can_stall) {
+			if (fsg_is_set(common))
+				fsg_set_halt(common->fsg,
+					     common->fsg->bulk_out);
+			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+			rc = -EINTR;
+#endif
+
+		/*
+		 * We can't stall.  Read in the excess data and throw it
+		 * all away.
+		 */
+		} else {
+			rc = throw_away_data(common);
+		}
+		break;
+	}
+	return rc;
+}
+
+static int send_status(struct fsg_common *common)
+{
+	struct fsg_lun		*curlun = common->curlun;
+	struct fsg_buffhd	*bh;
+	struct bulk_cs_wrap	*csw;
+	int			rc;
+	u8			status = US_BULK_STAT_OK;
+	u32			sd, sdinfo = 0;
+
+	/* Wait for the next buffer to become available */
+	bh = common->next_buffhd_to_fill;
+	while (bh->state != BUF_STATE_EMPTY) {
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+
+	if (curlun) {
+		sd = curlun->sense_data;
+		sdinfo = curlun->sense_data_info;
+	} else if (common->bad_lun_okay)
+		sd = SS_NO_SENSE;
+	else
+		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+
+	if (common->phase_error) {
+		DBG(common, "sending phase-error status\n");
+		status = US_BULK_STAT_PHASE;
+		sd = SS_INVALID_COMMAND;
+	} else if (sd != SS_NO_SENSE) {
+		DBG(common, "sending command-failure status\n");
+		status = US_BULK_STAT_FAIL;
+		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
+				"  info x%x\n",
+				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
+	}
+
+	/* Store and send the Bulk-only CSW */
+	csw = (void *)bh->buf;
+
+	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
+	csw->Tag = common->tag;
+	csw->Residue = cpu_to_le32(common->residue);
+	csw->Status = status;
+
+	bh->inreq->length = US_BULK_CS_WRAP_LEN;
+	bh->inreq->zero = 0;
+	if (!start_in_transfer(common, bh))
+		/* Don't know what to do if common->fsg is NULL */
+		return -EIO;
+
+	common->next_buffhd_to_fill = bh->next;
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have.
+ */
+static int check_command(struct fsg_common *common, int cmnd_size,
+			 enum data_direction data_dir, unsigned int mask,
+			 int needs_medium, const char *name)
+{
+	int			i;
+	int			lun = common->cmnd[1] >> 5;
+	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
+	char			hdlen[20];
+	struct fsg_lun		*curlun;
+
+	hdlen[0] = 0;
+	if (common->data_dir != DATA_DIR_UNKNOWN)
+		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
+			common->data_size);
+	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
+	     name, cmnd_size, dirletter[(int) data_dir],
+	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
+
+	/*
+	 * We can't reply at all until we know the correct data direction
+	 * and size.
+	 */
+	if (common->data_size_from_cmnd == 0)
+		data_dir = DATA_DIR_NONE;
+	if (common->data_size < common->data_size_from_cmnd) {
+		/*
+		 * Host data size < Device data size is a phase error.
+		 * Carry out the command, but only transfer as much as
+		 * we are allowed.
+		 */
+		common->data_size_from_cmnd = common->data_size;
+		common->phase_error = 1;
+	}
+	common->residue = common->data_size;
+	common->usb_amount_left = common->data_size;
+
+	/* Conflicting data directions is a phase error */
+	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
+		common->phase_error = 1;
+		return -EINVAL;
+	}
+
+	/* Verify the length of the command itself */
+	if (cmnd_size != common->cmnd_size) {
+
+		/*
+		 * Special case workaround: There are plenty of buggy SCSI
+		 * implementations. Many have issues with cbw->Length
+		 * field passing a wrong command size. For those cases we
+		 * always try to work around the problem by using the length
+		 * sent by the host side provided it is at least as large
+		 * as the correct command length.
+		 * Examples of such cases would be MS-Windows, which issues
+		 * REQUEST SENSE with cbw->Length == 12 where it should
+		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
+		 * REQUEST SENSE with cbw->Length == 10 where it should
+		 * be 6 as well.
+		 */
+		if (cmnd_size <= common->cmnd_size) {
+			DBG(common, "%s is buggy! Expected length %d "
+			    "but we got %d\n", name,
+			    cmnd_size, common->cmnd_size);
+			cmnd_size = common->cmnd_size;
+		} else {
+			common->phase_error = 1;
+			return -EINVAL;
+		}
+	}
+
+	/* Check that the LUN values are consistent */
+	if (common->lun != lun)
+		DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n",
+		    common->lun, lun);
+
+	/* Check the LUN */
+	curlun = common->curlun;
+	if (curlun) {
+		if (common->cmnd[0] != REQUEST_SENSE) {
+			curlun->sense_data = SS_NO_SENSE;
+			curlun->sense_data_info = 0;
+			curlun->info_valid = 0;
+		}
+	} else {
+		common->bad_lun_okay = 0;
+
+		/*
+		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
+		 * to use unsupported LUNs; all others may not.
+		 */
+		if (common->cmnd[0] != INQUIRY &&
+		    common->cmnd[0] != REQUEST_SENSE) {
+			DBG(common, "unsupported LUN %d\n", common->lun);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * If a unit attention condition exists, only INQUIRY and
+	 * REQUEST SENSE commands are allowed; anything else must fail.
+	 */
+	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
+	    common->cmnd[0] != INQUIRY &&
+	    common->cmnd[0] != REQUEST_SENSE) {
+		curlun->sense_data = curlun->unit_attention_data;
+		curlun->unit_attention_data = SS_NO_SENSE;
+		return -EINVAL;
+	}
+
+	/* Check that only command bytes listed in the mask are non-zero */
+	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
+	for (i = 1; i < cmnd_size; ++i) {
+		if (common->cmnd[i] && !(mask & (1 << i))) {
+			if (curlun)
+				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+			return -EINVAL;
+		}
+	}
+
+	/* If the medium isn't mounted and the command needs to access
+	 * it, return an error. */
+	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
+		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* wrapper of check_command for data size in blocks handling */
+static int check_command_size_in_blocks(struct fsg_common *common,
+		int cmnd_size, enum data_direction data_dir,
+		unsigned int mask, int needs_medium, const char *name)
+{
+	if (common->curlun)
+		common->data_size_from_cmnd <<= common->curlun->blkbits;
+	return check_command(common, cmnd_size, data_dir,
+			mask, needs_medium, name);
+}
+
+static int do_scsi_command(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh;
+	int			rc;
+	int			reply = -EINVAL;
+	int			i;
+	static char		unknown[16];
+
+	dump_cdb(common);
+
+	/* Wait for the next buffer to become available for data or status */
+	bh = common->next_buffhd_to_fill;
+	common->next_buffhd_to_drain = bh;
+	while (bh->state != BUF_STATE_EMPTY) {
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+	common->phase_error = 0;
+	common->short_packet_received = 0;
+
+	down_read(&common->filesem);	/* We're using the backing file */
+	switch (common->cmnd[0]) {
+
+	case INQUIRY:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<4), 0,
+				      "INQUIRY");
+		if (reply == 0)
+			reply = do_inquiry(common, bh);
+		break;
+
+	case MODE_SELECT:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
+				      (1<<1) | (1<<4), 0,
+				      "MODE SELECT(6)");
+		if (reply == 0)
+			reply = do_mode_select(common, bh);
+		break;
+
+	case MODE_SELECT_10:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
+				      (1<<1) | (3<<7), 0,
+				      "MODE SELECT(10)");
+		if (reply == 0)
+			reply = do_mode_select(common, bh);
+		break;
+
+	case MODE_SENSE:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<1) | (1<<2) | (1<<4), 0,
+				      "MODE SENSE(6)");
+		if (reply == 0)
+			reply = do_mode_sense(common, bh);
+		break;
+
+	case MODE_SENSE_10:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (1<<1) | (1<<2) | (3<<7), 0,
+				      "MODE SENSE(10)");
+		if (reply == 0)
+			reply = do_mode_sense(common, bh);
+		break;
+
+	case ALLOW_MEDIUM_REMOVAL:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				      (1<<4), 0,
+				      "PREVENT-ALLOW MEDIUM REMOVAL");
+		if (reply == 0)
+			reply = do_prevent_allow(common);
+		break;
+
+	case READ_6:
+		i = common->cmnd[4];
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_TO_HOST,
+				      (7<<1) | (1<<4), 1,
+				      "READ(6)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_10:
+		common->data_size_from_cmnd =
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "READ(10)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_12:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
+				      "READ(12)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
+	case READ_CAPACITY:
+		common->data_size_from_cmnd = 8;
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (0xf<<2) | (1<<8), 1,
+				      "READ CAPACITY");
+		if (reply == 0)
+			reply = do_read_capacity(common, bh);
+		break;
+
+	case READ_HEADER:
+		if (!common->curlun || !common->curlun->cdrom)
+			goto unknown_cmnd;
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (3<<7) | (0x1f<<1), 1,
+				      "READ HEADER");
+		if (reply == 0)
+			reply = do_read_header(common, bh);
+		break;
+
+	case READ_TOC:
+		if (!common->curlun || !common->curlun->cdrom)
+			goto unknown_cmnd;
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (7<<6) | (1<<1), 1,
+				      "READ TOC");
+		if (reply == 0)
+			reply = do_read_toc(common, bh);
+		break;
+
+	case READ_FORMAT_CAPACITIES:
+		common->data_size_from_cmnd =
+			get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				      (3<<7), 1,
+				      "READ FORMAT CAPACITIES");
+		if (reply == 0)
+			reply = do_read_format_capacities(common, bh);
+		break;
+
+	case REQUEST_SENSE:
+		common->data_size_from_cmnd = common->cmnd[4];
+		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+				      (1<<4), 0,
+				      "REQUEST SENSE");
+		if (reply == 0)
+			reply = do_request_sense(common, bh);
+		break;
+
+	case START_STOP:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				      (1<<1) | (1<<4), 0,
+				      "START-STOP UNIT");
+		if (reply == 0)
+			reply = do_start_stop(common);
+		break;
+
+	case SYNCHRONIZE_CACHE:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 10, DATA_DIR_NONE,
+				      (0xf<<2) | (3<<7), 1,
+				      "SYNCHRONIZE CACHE");
+		if (reply == 0)
+			reply = do_synchronize_cache(common);
+		break;
+
+	case TEST_UNIT_READY:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 6, DATA_DIR_NONE,
+				0, 1,
+				"TEST UNIT READY");
+		break;
+
+	/*
+	 * Although optional, this command is used by MS-Windows.  We
+	 * support a minimal version: BytChk must be 0.
+	 */
+	case VERIFY:
+		common->data_size_from_cmnd = 0;
+		reply = check_command(common, 10, DATA_DIR_NONE,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "VERIFY");
+		if (reply == 0)
+			reply = do_verify(common);
+		break;
+
+	case WRITE_6:
+		i = common->cmnd[4];
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_FROM_HOST,
+				      (7<<1) | (1<<4), 1,
+				      "WRITE(6)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	case WRITE_10:
+		common->data_size_from_cmnd =
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xf<<2) | (3<<7), 1,
+				      "WRITE(10)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	case WRITE_12:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
+				      "WRITE(12)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
+	/*
+	 * Some mandatory commands that we recognize but don't implement.
+	 * They don't mean much in this setting.  It's left as an exercise
+	 * for anyone interested to implement RESERVE and RELEASE in terms
+	 * of Posix locks.
+	 */
+	case FORMAT_UNIT:
+	case RELEASE:
+	case RESERVE:
+	case SEND_DIAGNOSTIC:
+		/* Fall through */
+
+	default:
+unknown_cmnd:
+		common->data_size_from_cmnd = 0;
+		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
+		reply = check_command(common, common->cmnd_size,
+				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
+		if (reply == 0) {
+			common->curlun->sense_data = SS_INVALID_COMMAND;
+			reply = -EINVAL;
+		}
+		break;
+	}
+	up_read(&common->filesem);
+
+	if (reply == -EINTR || signal_pending(current))
+		return -EINTR;
+
+	/* Set up the single reply buffer for finish_reply() */
+	if (reply == -EINVAL)
+		reply = 0;		/* Error reply length */
+	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
+		reply = min((u32)reply, common->data_size_from_cmnd);
+		bh->inreq->length = reply;
+		bh->state = BUF_STATE_FULL;
+		common->residue -= reply;
+	}				/* Otherwise it's already set */
+
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+	struct usb_request	*req = bh->outreq;
+	struct bulk_cb_wrap	*cbw = req->buf;
+	struct fsg_common	*common = fsg->common;
+
+	/* Was this a real packet?  Should it be ignored? */
+	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
+		return -EINVAL;
+
+	/* Is the CBW valid? */
+	if (req->actual != US_BULK_CB_WRAP_LEN ||
+			cbw->Signature != cpu_to_le32(
+				US_BULK_CB_SIGN)) {
+		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
+				req->actual,
+				le32_to_cpu(cbw->Signature));
+
+		/*
+		 * The Bulk-only spec says we MUST stall the IN endpoint
+		 * (6.6.1), so it's unavoidable.  It also says we must
+		 * retain this state until the next reset, but there's
+		 * no way to tell the controller driver it should ignore
+		 * Clear-Feature(HALT) requests.
+		 *
+		 * We aren't required to halt the OUT endpoint; instead
+		 * we can simply accept and discard any data received
+		 * until the next reset.
+		 */
+		wedge_bulk_in_endpoint(fsg);
+		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+		return -EINVAL;
+	}
+
+	/* Is the CBW meaningful? */
+	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
+			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
+		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
+				"cmdlen %u\n",
+				cbw->Lun, cbw->Flags, cbw->Length);
+
+		/*
+		 * We can do anything we want here, so let's stall the
+		 * bulk pipes if we are allowed to.
+		 */
+		if (common->can_stall) {
+			fsg_set_halt(fsg, fsg->bulk_out);
+			halt_bulk_in_endpoint(fsg);
+		}
+		return -EINVAL;
+	}
+
+	/* Save the command for later */
+	common->cmnd_size = cbw->Length;
+	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
+	if (cbw->Flags & US_BULK_FLAG_IN)
+		common->data_dir = DATA_DIR_TO_HOST;
+	else
+		common->data_dir = DATA_DIR_FROM_HOST;
+	common->data_size = le32_to_cpu(cbw->DataTransferLength);
+	if (common->data_size == 0)
+		common->data_dir = DATA_DIR_NONE;
+	common->lun = cbw->Lun;
+	if (common->lun >= 0 && common->lun < common->nluns)
+		common->curlun = &common->luns[common->lun];
+	else
+		common->curlun = NULL;
+	common->tag = cbw->Tag;
+	return 0;
+}
+
+static int get_next_command(struct fsg_common *common)
+{
+	struct fsg_buffhd	*bh;
+	int			rc = 0;
+
+	/* Wait for the next buffer to become available */
+	bh = common->next_buffhd_to_fill;
+	while (bh->state != BUF_STATE_EMPTY) {
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+
+	/* Queue a request to read a Bulk-only CBW */
+	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
+	if (!start_out_transfer(common, bh))
+		/* Don't know what to do if common->fsg is NULL */
+		return -EIO;
+
+	/*
+	 * We will drain the buffer in software, which means we
+	 * can reuse it for the next filling.  No need to advance
+	 * next_buffhd_to_fill.
+	 */
+
+	/* Wait for the CBW to arrive */
+	while (bh->state != BUF_STATE_FULL) {
+		rc = sleep_thread(common);
+		if (rc)
+			return rc;
+	}
+	smp_rmb();
+	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
+	bh->state = BUF_STATE_EMPTY;
+
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
+		struct usb_request **preq)
+{
+	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (*preq)
+		return 0;
+	ERROR(common, "can't allocate request for %s\n", ep->name);
+	return -ENOMEM;
+}
+
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
+{
+	struct fsg_dev *fsg;
+	int i, rc = 0;
+
+	if (common->running)
+		DBG(common, "reset interface\n");
+
+reset:
+	/* Deallocate the requests */
+	if (common->fsg) {
+		fsg = common->fsg;
+
+		for (i = 0; i < fsg_num_buffers; ++i) {
+			struct fsg_buffhd *bh = &common->buffhds[i];
+
+			if (bh->inreq) {
+				usb_ep_free_request(fsg->bulk_in, bh->inreq);
+				bh->inreq = NULL;
+			}
+			if (bh->outreq) {
+				usb_ep_free_request(fsg->bulk_out, bh->outreq);
+				bh->outreq = NULL;
+			}
+		}
+
+		/* Disable the endpoints */
+		if (fsg->bulk_in_enabled) {
+			usb_ep_disable(fsg->bulk_in);
+			fsg->bulk_in_enabled = 0;
+		}
+		if (fsg->bulk_out_enabled) {
+			usb_ep_disable(fsg->bulk_out);
+			fsg->bulk_out_enabled = 0;
+		}
+
+		common->fsg = NULL;
+		wake_up(&common->fsg_wait);
+	}
+
+	common->running = 0;
+	if (!new_fsg || rc)
+		return rc;
+
+	common->fsg = new_fsg;
+	fsg = common->fsg;
+
+	/* Enable the endpoints */
+	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_in);
+	if (rc)
+		goto reset;
+	fsg->bulk_in->driver_data = common;
+	fsg->bulk_in_enabled = 1;
+
+	rc = config_ep_by_speed(common->gadget, &(fsg->function),
+				fsg->bulk_out);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_out);
+	if (rc)
+		goto reset;
+	fsg->bulk_out->driver_data = common;
+	fsg->bulk_out_enabled = 1;
+	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
+	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+
+	/* Allocate the requests */
+	for (i = 0; i < fsg_num_buffers; ++i) {
+		struct fsg_buffhd	*bh = &common->buffhds[i];
+
+		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
+		if (rc)
+			goto reset;
+		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
+		if (rc)
+			goto reset;
+		bh->inreq->buf = bh->outreq->buf = bh->buf;
+		bh->inreq->context = bh->outreq->context = bh;
+		bh->inreq->complete = bulk_in_complete;
+		bh->outreq->complete = bulk_out_complete;
+	}
+
+	common->running = 1;
+	for (i = 0; i < common->nluns; ++i)
+		common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+	return rc;
+}
+
+
+/****************************** ALT CONFIGS ******************************/
+
+static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct fsg_dev *fsg = fsg_from_func(f);
+	fsg->common->new_fsg = fsg;
+	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+	return USB_GADGET_DELAYED_STATUS;
+}
+
+static void fsg_disable(struct usb_function *f)
+{
+	struct fsg_dev *fsg = fsg_from_func(f);
+	fsg->common->new_fsg = NULL;
+	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void handle_exception(struct fsg_common *common)
+{
+	siginfo_t		info;
+	int			i;
+	struct fsg_buffhd	*bh;
+	enum fsg_state		old_state;
+	struct fsg_lun		*curlun;
+	unsigned int		exception_req_tag;
+
+	/*
+	 * Clear the existing signals.  Anything but SIGUSR1 is converted
+	 * into a high-priority EXIT exception.
+	 */
+	for (;;) {
+		int sig =
+			dequeue_signal_lock(current, &current->blocked, &info);
+		if (!sig)
+			break;
+		if (sig != SIGUSR1) {
+			if (common->state < FSG_STATE_EXIT)
+				DBG(common, "Main thread exiting on signal\n");
+			raise_exception(common, FSG_STATE_EXIT);
+		}
+	}
+
+	/* Cancel all the pending transfers */
+	if (likely(common->fsg)) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
+			bh = &common->buffhds[i];
+			if (bh->inreq_busy)
+				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
+			if (bh->outreq_busy)
+				usb_ep_dequeue(common->fsg->bulk_out,
+					       bh->outreq);
+		}
+
+		/* Wait until everything is idle */
+		for (;;) {
+			int num_active = 0;
+			for (i = 0; i < fsg_num_buffers; ++i) {
+				bh = &common->buffhds[i];
+				num_active += bh->inreq_busy + bh->outreq_busy;
+			}
+			if (num_active == 0)
+				break;
+			if (sleep_thread(common))
+				return;
+		}
+
+		/* Clear out the controller's fifos */
+		if (common->fsg->bulk_in_enabled)
+			usb_ep_fifo_flush(common->fsg->bulk_in);
+		if (common->fsg->bulk_out_enabled)
+			usb_ep_fifo_flush(common->fsg->bulk_out);
+	}
+
+	/*
+	 * Reset the I/O buffer states and pointers, the SCSI
+	 * state, and the exception.  Then invoke the handler.
+	 */
+	spin_lock_irq(&common->lock);
+
+	for (i = 0; i < fsg_num_buffers; ++i) {
+		bh = &common->buffhds[i];
+		bh->state = BUF_STATE_EMPTY;
+	}
+	common->next_buffhd_to_fill = &common->buffhds[0];
+	common->next_buffhd_to_drain = &common->buffhds[0];
+	exception_req_tag = common->exception_req_tag;
+	old_state = common->state;
+
+	if (old_state == FSG_STATE_ABORT_BULK_OUT)
+		common->state = FSG_STATE_STATUS_PHASE;
+	else {
+		for (i = 0; i < common->nluns; ++i) {
+			curlun = &common->luns[i];
+			curlun->prevent_medium_removal = 0;
+			curlun->sense_data = SS_NO_SENSE;
+			curlun->unit_attention_data = SS_NO_SENSE;
+			curlun->sense_data_info = 0;
+			curlun->info_valid = 0;
+		}
+		common->state = FSG_STATE_IDLE;
+	}
+	spin_unlock_irq(&common->lock);
+
+	/* Carry out any extra actions required for the exception */
+	switch (old_state) {
+	case FSG_STATE_ABORT_BULK_OUT:
+		send_status(common);
+		spin_lock_irq(&common->lock);
+		if (common->state == FSG_STATE_STATUS_PHASE)
+			common->state = FSG_STATE_IDLE;
+		spin_unlock_irq(&common->lock);
+		break;
+
+	case FSG_STATE_RESET:
+		/*
+		 * In case we were forced against our will to halt a
+		 * bulk endpoint, clear the halt now.  (The SuperH UDC
+		 * requires this.)
+		 */
+		if (!fsg_is_set(common))
+			break;
+		if (test_and_clear_bit(IGNORE_BULK_OUT,
+				       &common->fsg->atomic_bitflags))
+			usb_ep_clear_halt(common->fsg->bulk_in);
+
+		if (common->ep0_req_tag == exception_req_tag)
+			ep0_queue(common);	/* Complete the status stage */
+
+		/*
+		 * Technically this should go here, but it would only be
+		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
+		 * CONFIG_CHANGE cases.
+		 */
+		/* for (i = 0; i < common->nluns; ++i) */
+		/*	common->luns[i].unit_attention_data = */
+		/*		SS_RESET_OCCURRED;  */
+		break;
+
+	case FSG_STATE_CONFIG_CHANGE:
+		do_set_interface(common, common->new_fsg);
+		if (common->new_fsg)
+			usb_composite_setup_continue(common->cdev);
+		break;
+
+	case FSG_STATE_EXIT:
+	case FSG_STATE_TERMINATED:
+		do_set_interface(common, NULL);		/* Free resources */
+		spin_lock_irq(&common->lock);
+		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
+		spin_unlock_irq(&common->lock);
+		break;
+
+	case FSG_STATE_INTERFACE_CHANGE:
+	case FSG_STATE_DISCONNECT:
+	case FSG_STATE_COMMAND_PHASE:
+	case FSG_STATE_DATA_PHASE:
+	case FSG_STATE_STATUS_PHASE:
+	case FSG_STATE_IDLE:
+		break;
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_main_thread(void *common_)
+{
+	struct fsg_common	*common = common_;
+
+	/*
+	 * Allow the thread to be killed by a signal, but set the signal mask
+	 * to block everything but INT, TERM, KILL, and USR1.
+	 */
+	allow_signal(SIGINT);
+	allow_signal(SIGTERM);
+	allow_signal(SIGKILL);
+	allow_signal(SIGUSR1);
+
+	/* Allow the thread to be frozen */
+	set_freezable();
+
+	/*
+	 * Arrange for userspace references to be interpreted as kernel
+	 * pointers.  That way we can pass a kernel pointer to a routine
+	 * that expects a __user pointer and it will work okay.
+	 */
+	set_fs(get_ds());
+
+	/* The main loop */
+	while (common->state != FSG_STATE_TERMINATED) {
+		if (exception_in_progress(common) || signal_pending(current)) {
+			handle_exception(common);
+			continue;
+		}
+
+		if (!common->running) {
+			sleep_thread(common);
+			continue;
+		}
+
+		if (get_next_command(common))
+			continue;
+
+		spin_lock_irq(&common->lock);
+		if (!exception_in_progress(common))
+			common->state = FSG_STATE_DATA_PHASE;
+		spin_unlock_irq(&common->lock);
+
+		if (do_scsi_command(common) || finish_reply(common))
+			continue;
+
+		spin_lock_irq(&common->lock);
+		if (!exception_in_progress(common))
+			common->state = FSG_STATE_STATUS_PHASE;
+		spin_unlock_irq(&common->lock);
+
+		if (send_status(common))
+			continue;
+
+		spin_lock_irq(&common->lock);
+		if (!exception_in_progress(common))
+			common->state = FSG_STATE_IDLE;
+		spin_unlock_irq(&common->lock);
+	}
+
+	spin_lock_irq(&common->lock);
+	common->thread_task = NULL;
+	spin_unlock_irq(&common->lock);
+
+	if (!common->ops || !common->ops->thread_exits
+	 || common->ops->thread_exits(common) < 0) {
+		struct fsg_lun *curlun = common->luns;
+		unsigned i = common->nluns;
+
+		down_write(&common->filesem);
+		for (; i--; ++curlun) {
+			if (!fsg_lun_is_open(curlun))
+				continue;
+
+			fsg_lun_close(curlun);
+			curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+		}
+		up_write(&common->filesem);
+	}
+
+	/* Let fsg_unbind() know the thread has exited */
+	complete_and_exit(&common->thread_notifier, 0);
+}
+
+
+/*************************** DEVICE ATTRIBUTES ***************************/
+
+static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro);
+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua);
+static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file);
+
+static struct device_attribute dev_attr_ro_cdrom =
+	__ATTR(ro, 0444, fsg_show_ro, NULL);
+static struct device_attribute dev_attr_file_nonremovable =
+	__ATTR(file, 0444, fsg_show_file, NULL);
+
+
+/****************************** FSG COMMON ******************************/
+
+static void fsg_common_release(struct kref *ref);
+
+static void fsg_lun_release(struct device *dev)
+{
+	/* Nothing needs to be done */
+}
+
+static inline void fsg_common_get(struct fsg_common *common)
+{
+	kref_get(&common->ref);
+}
+
+static inline void fsg_common_put(struct fsg_common *common)
+{
+	kref_put(&common->ref, fsg_common_release);
+}
+
+static struct fsg_common *fsg_common_init(struct fsg_common *common,
+					  struct usb_composite_dev *cdev,
+					  struct fsg_config *cfg)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	struct fsg_buffhd *bh;
+	struct fsg_lun *curlun;
+	struct fsg_lun_config *lcfg;
+	int nluns, i, rc;
+	char *pathbuf;
+
+	rc = fsg_num_buffers_validate();
+	if (rc != 0)
+		return ERR_PTR(rc);
+
+	/* Find out how many LUNs there should be */
+	nluns = cfg->nluns;
+	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
+		dev_err(&gadget->dev, "invalid number of LUNs: %u\n", nluns);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Allocate? */
+	if (!common) {
+		common = kzalloc(sizeof *common, GFP_KERNEL);
+		if (!common)
+			return ERR_PTR(-ENOMEM);
+		common->free_storage_on_release = 1;
+	} else {
+		memset(common, 0, sizeof *common);
+		common->free_storage_on_release = 0;
+	}
+
+	common->buffhds = kcalloc(fsg_num_buffers,
+				  sizeof *(common->buffhds), GFP_KERNEL);
+	if (!common->buffhds) {
+		if (common->free_storage_on_release)
+			kfree(common);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	common->ops = cfg->ops;
+	common->private_data = cfg->private_data;
+
+	common->gadget = gadget;
+	common->ep0 = gadget->ep0;
+	common->ep0req = cdev->req;
+	common->cdev = cdev;
+
+	/* Maybe allocate device-global string IDs, and patch descriptors */
+	if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
+		rc = usb_string_id(cdev);
+		if (unlikely(rc < 0))
+			goto error_release;
+		fsg_strings[FSG_STRING_INTERFACE].id = rc;
+		fsg_intf_desc.iInterface = rc;
+	}
+
+	/*
+	 * Create the LUNs, open their backing files, and register the
+	 * LUN devices in sysfs.
+	 */
+	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
+	if (unlikely(!curlun)) {
+		rc = -ENOMEM;
+		goto error_release;
+	}
+	common->luns = curlun;
+
+	init_rwsem(&common->filesem);
+
+	for (i = 0, lcfg = cfg->luns; i < nluns; ++i, ++curlun, ++lcfg) {
+		curlun->cdrom = !!lcfg->cdrom;
+		curlun->ro = lcfg->cdrom || lcfg->ro;
+		curlun->initially_ro = curlun->ro;
+		curlun->removable = lcfg->removable;
+		curlun->dev.release = fsg_lun_release;
+		curlun->dev.parent = &gadget->dev;
+		/* curlun->dev.driver = &fsg_driver.driver; XXX */
+		dev_set_drvdata(&curlun->dev, &common->filesem);
+		dev_set_name(&curlun->dev, "lun%d", i);
+
+		rc = device_register(&curlun->dev);
+		if (rc) {
+			INFO(common, "failed to register LUN%d: %d\n", i, rc);
+			common->nluns = i;
+			put_device(&curlun->dev);
+			goto error_release;
+		}
+
+		rc = device_create_file(&curlun->dev,
+					curlun->cdrom
+				      ? &dev_attr_ro_cdrom
+				      : &dev_attr_ro);
+		if (rc)
+			goto error_luns;
+		rc = device_create_file(&curlun->dev,
+					curlun->removable
+				      ? &dev_attr_file
+				      : &dev_attr_file_nonremovable);
+		if (rc)
+			goto error_luns;
+		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
+		if (rc)
+			goto error_luns;
+
+		if (lcfg->filename) {
+			rc = fsg_lun_open(curlun, lcfg->filename);
+			if (rc)
+				goto error_luns;
+		} else if (!curlun->removable) {
+			ERROR(common, "no file given for LUN%d\n", i);
+			rc = -EINVAL;
+			goto error_luns;
+		}
+	}
+	common->nluns = nluns;
+
+	/* Data buffers cyclic list */
+	bh = common->buffhds;
+	i = fsg_num_buffers;
+	goto buffhds_first_it;
+	do {
+		bh->next = bh + 1;
+		++bh;
+buffhds_first_it:
+		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
+		if (unlikely(!bh->buf)) {
+			rc = -ENOMEM;
+			goto error_release;
+		}
+	} while (--i);
+	bh->next = common->buffhds;
+
+	/* Prepare inquiryString */
+	if (cfg->release != 0xffff) {
+		i = cfg->release;
+	} else {
+		i = usb_gadget_controller_number(gadget);
+		if (i >= 0) {
+			i = 0x0300 + i;
+		} else {
+			WARNING(common, "controller '%s' not recognized\n",
+				gadget->name);
+			i = 0x0399;
+		}
+	}
+	snprintf(common->inquiry_string, sizeof common->inquiry_string,
+		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
+		 /* Assume product name dependent on the first LUN */
+		 cfg->product_name ?: (common->luns->cdrom
+				     ? "File-Stor Gadget"
+				     : "File-CD Gadget"),
+		 i);
+
+	/*
+	 * Some peripheral controllers are known not to be able to
+	 * halt bulk endpoints correctly.  If one of them is present,
+	 * disable stalls.
+	 */
+	common->can_stall = cfg->can_stall &&
+		!(gadget_is_at91(common->gadget));
+
+	spin_lock_init(&common->lock);
+	kref_init(&common->ref);
+
+	/* Tell the thread to start working */
+	common->thread_task =
+		kthread_create(fsg_main_thread, common, "file-storage");
+	if (IS_ERR(common->thread_task)) {
+		rc = PTR_ERR(common->thread_task);
+		goto error_release;
+	}
+	init_completion(&common->thread_notifier);
+	init_waitqueue_head(&common->fsg_wait);
+
+	/* Information */
+	INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
+	INFO(common, "Number of LUNs=%d\n", common->nluns);
+
+	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+	for (i = 0, nluns = common->nluns, curlun = common->luns;
+	     i < nluns;
+	     ++curlun, ++i) {
+		char *p = "(no medium)";
+		if (fsg_lun_is_open(curlun)) {
+			p = "(error)";
+			if (pathbuf) {
+				p = d_path(&curlun->filp->f_path,
+					   pathbuf, PATH_MAX);
+				if (IS_ERR(p))
+					p = "(error)";
+			}
+		}
+		LINFO(curlun, "LUN: %s%s%sfile: %s\n",
+		      curlun->removable ? "removable " : "",
+		      curlun->ro ? "read only " : "",
+		      curlun->cdrom ? "CD-ROM " : "",
+		      p);
+	}
+	kfree(pathbuf);
+
+	DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
+
+	wake_up_process(common->thread_task);
+
+	return common;
+
+error_luns:
+	common->nluns = i + 1;
+error_release:
+	common->state = FSG_STATE_TERMINATED;	/* The thread is dead */
+	/* Call fsg_common_release() directly, ref might be not initialised. */
+	fsg_common_release(&common->ref);
+	return ERR_PTR(rc);
+}
+
+static void fsg_common_release(struct kref *ref)
+{
+	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
+
+	/* If the thread isn't already dead, tell it to exit now */
+	if (common->state != FSG_STATE_TERMINATED) {
+		raise_exception(common, FSG_STATE_EXIT);
+		wait_for_completion(&common->thread_notifier);
+	}
+
+	if (likely(common->luns)) {
+		struct fsg_lun *lun = common->luns;
+		unsigned i = common->nluns;
+
+		/* In error recovery common->nluns may be zero. */
+		for (; i; --i, ++lun) {
+			device_remove_file(&lun->dev, &dev_attr_nofua);
+			device_remove_file(&lun->dev,
+					   lun->cdrom
+					 ? &dev_attr_ro_cdrom
+					 : &dev_attr_ro);
+			device_remove_file(&lun->dev,
+					   lun->removable
+					 ? &dev_attr_file
+					 : &dev_attr_file_nonremovable);
+			fsg_lun_close(lun);
+			device_unregister(&lun->dev);
+		}
+
+		kfree(common->luns);
+	}
+
+	{
+		struct fsg_buffhd *bh = common->buffhds;
+		unsigned i = fsg_num_buffers;
+		do {
+			kfree(bh->buf);
+		} while (++bh, --i);
+	}
+
+	kfree(common->buffhds);
+	if (common->free_storage_on_release)
+		kfree(common);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
+
+	DBG(fsg, "unbind\n");
+	if (fsg->common->fsg == fsg) {
+		fsg->common->new_fsg = NULL;
+		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		/* FIXME: make interruptible or killable somehow? */
+		wait_event(common->fsg_wait, common->fsg != fsg);
+	}
+
+	fsg_common_put(common);
+	usb_free_descriptors(fsg->function.descriptors);
+	usb_free_descriptors(fsg->function.hs_descriptors);
+	usb_free_descriptors(fsg->function.ss_descriptors);
+	kfree(fsg);
+}
+
+static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct usb_gadget	*gadget = c->cdev->gadget;
+	int			i;
+	struct usb_ep		*ep;
+
+	fsg->gadget = gadget;
+
+	/* New interface */
+	i = usb_interface_id(c, f);
+	if (i < 0)
+		return i;
+	fsg_intf_desc.bInterfaceNumber = i;
+	fsg->interface_number = i;
+
+	/* Find all the endpoints we will use */
+	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
+	if (!ep)
+		goto autoconf_fail;
+	ep->driver_data = fsg->common;	/* claim the endpoint */
+	fsg->bulk_in = ep;
+
+	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
+	if (!ep)
+		goto autoconf_fail;
+	ep->driver_data = fsg->common;	/* claim the endpoint */
+	fsg->bulk_out = ep;
+
+	/* Copy descriptors */
+	f->descriptors = usb_copy_descriptors(fsg_fs_function);
+	if (unlikely(!f->descriptors))
+		return -ENOMEM;
+
+	if (gadget_is_dualspeed(gadget)) {
+		/* Assume endpoint addresses are the same for both speeds */
+		fsg_hs_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_hs_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
+		if (unlikely(!f->hs_descriptors)) {
+			usb_free_descriptors(f->descriptors);
+			return -ENOMEM;
+		}
+	}
+
+	if (gadget_is_superspeed(gadget)) {
+		unsigned	max_burst;
+
+		/* Calculate bMaxBurst, we know packet size is 1024 */
+		max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+
+		fsg_ss_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+		fsg_ss_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+
+		f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
+		if (unlikely(!f->ss_descriptors)) {
+			usb_free_descriptors(f->hs_descriptors);
+			usb_free_descriptors(f->descriptors);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+
+autoconf_fail:
+	ERROR(fsg, "unable to autoconfigure all endpoints\n");
+	return -ENOTSUPP;
+}
+
+
+/****************************** ADD FUNCTION ******************************/
+
+static struct usb_gadget_strings *fsg_strings_array[] = {
+	&fsg_stringtab,
+	NULL,
+};
+
+static int fsg_bind_config(struct usb_composite_dev *cdev,
+			   struct usb_configuration *c,
+			   struct fsg_common *common)
+{
+	struct fsg_dev *fsg;
+	int rc;
+
+	fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
+	if (unlikely(!fsg))
+		return -ENOMEM;
+
+	fsg->function.name        = FSG_DRIVER_DESC;
+	fsg->function.strings     = fsg_strings_array;
+	fsg->function.bind        = fsg_bind;
+	fsg->function.unbind      = fsg_unbind;
+	fsg->function.setup       = fsg_setup;
+	fsg->function.set_alt     = fsg_set_alt;
+	fsg->function.disable     = fsg_disable;
+
+	fsg->common               = common;
+	/*
+	 * Our caller holds a reference to common structure so we
+	 * don't have to be worry about it being freed until we return
+	 * from this function.  So instead of incrementing counter now
+	 * and decrement in error recovery we increment it only when
+	 * call to usb_add_function() was successful.
+	 */
+
+	rc = usb_add_function(c, &fsg->function);
+	if (unlikely(rc))
+		kfree(fsg);
+	else
+		fsg_common_get(fsg->common);
+	return rc;
+}
+
+
+/************************* Module parameters *************************/
+
+struct fsg_module_parameters {
+	char		*file[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
+
+	unsigned int	file_count, ro_count, removable_count, cdrom_count;
+	unsigned int	nofua_count;
+	unsigned int	luns;	/* nluns */
+	bool		stall;	/* can_stall */
+};
+
+#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
+	module_param_array_named(prefix ## name, params.name, type,	\
+				 &prefix ## params.name ## _count,	\
+				 S_IRUGO);				\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define _FSG_MODULE_PARAM(prefix, params, name, type, desc)		\
+	module_param_named(prefix ## name, params.name, type,		\
+			   S_IRUGO);					\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp,		\
+				"names of backing files or devices");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool,		\
+				"true to force read-only");		\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool,	\
+				"true to simulate removable media");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool,		\
+				"true to simulate CD-ROM instead of disk"); \
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool,		\
+				"true to ignore SCSI WRITE(10,12) FUA bit"); \
+	_FSG_MODULE_PARAM(prefix, params, luns, uint,			\
+			  "number of LUNs");				\
+	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
+			  "false to prevent bulk stalls")
+
+static void
+fsg_config_from_params(struct fsg_config *cfg,
+		       const struct fsg_module_parameters *params)
+{
+	struct fsg_lun_config *lun;
+	unsigned i;
+
+	/* Configure LUNs */
+	cfg->nluns =
+		min(params->luns ?: (params->file_count ?: 1u),
+		    (unsigned)FSG_MAX_LUNS);
+	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
+		lun->ro = !!params->ro[i];
+		lun->cdrom = !!params->cdrom[i];
+		lun->removable = !!params->removable[i];
+		lun->filename =
+			params->file_count > i && params->file[i][0]
+			? params->file[i]
+			: 0;
+	}
+
+	/* Let MSF use defaults */
+	cfg->vendor_name = 0;
+	cfg->product_name = 0;
+	cfg->release = 0xffff;
+
+	cfg->ops = NULL;
+	cfg->private_data = NULL;
+
+	/* Finalise */
+	cfg->can_stall = params->stall;
+}
+
+static inline struct fsg_common *
+fsg_common_from_params(struct fsg_common *common,
+		       struct usb_composite_dev *cdev,
+		       const struct fsg_module_parameters *params)
+	__attribute__((unused));
+static inline struct fsg_common *
+fsg_common_from_params(struct fsg_common *common,
+		       struct usb_composite_dev *cdev,
+		       const struct fsg_module_parameters *params)
+{
+	struct fsg_config cfg;
+	fsg_config_from_params(&cfg, params);
+	return fsg_common_init(common, cdev, &cfg);
+}
diff --git a/drivers/staging/ccg/f_rndis.c b/drivers/staging/ccg/f_rndis.c
new file mode 100644
index 000000000000..b1681e45aca7
--- /dev/null
+++ b/drivers/staging/ccg/f_rndis.c
@@ -0,0 +1,918 @@
+/*
+ * f_rndis.c -- RNDIS link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 Samsung Electronics
+ *                    Author: Michal Nazarewicz (mina86@mina86.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include <linux/atomic.h>
+
+#include "u_ether.h"
+#include "rndis.h"
+
+
+/*
+ * This function is an RNDIS Ethernet port -- a Microsoft protocol that's
+ * been promoted instead of the standard CDC Ethernet.  The published RNDIS
+ * spec is ambiguous, incomplete, and needlessly complex.  Variants such as
+ * ActiveSync have even worse status in terms of specification.
+ *
+ * In short:  it's a protocol controlled by (and for) Microsoft, not for an
+ * Open ecosystem or markets.  Linux supports it *only* because Microsoft
+ * doesn't support the CDC Ethernet standard.
+ *
+ * The RNDIS data transfer model is complex, with multiple Ethernet packets
+ * per USB message, and out of band data.  The control model is built around
+ * what's essentially an "RNDIS RPC" protocol.  It's all wrapped in a CDC ACM
+ * (modem, not Ethernet) veneer, with those ACM descriptors being entirely
+ * useless (they're ignored).  RNDIS expects to be the only function in its
+ * configuration, so it's no real help if you need composite devices; and
+ * it expects to be the first configuration too.
+ *
+ * There is a single technical advantage of RNDIS over CDC Ethernet, if you
+ * discount the fluff that its RPC can be made to deliver: it doesn't need
+ * a NOP altsetting for the data interface.  That lets it work on some of the
+ * "so smart it's stupid" hardware which takes over configuration changes
+ * from the software, and adds restrictions like "no altsettings".
+ *
+ * Unfortunately MSFT's RNDIS drivers are buggy.  They hang or oops, and
+ * have all sorts of contrary-to-specification oddities that can prevent
+ * them from working sanely.  Since bugfixes (or accurate specs, letting
+ * Linux work around those bugs) are unlikely to ever come from MSFT, you
+ * may want to avoid using RNDIS on purely operational grounds.
+ *
+ * Omissions from the RNDIS 1.0 specification include:
+ *
+ *   - Power management ... references data that's scattered around lots
+ *     of other documentation, which is incorrect/incomplete there too.
+ *
+ *   - There are various undocumented protocol requirements, like the need
+ *     to send garbage in some control-OUT messages.
+ *
+ *   - MS-Windows drivers sometimes emit undocumented requests.
+ */
+
+struct f_rndis {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+	u8				ethaddr[ETH_ALEN];
+	u32				vendorID;
+	const char			*manufacturer;
+	int				config;
+
+	struct usb_ep			*notify;
+	struct usb_request		*notify_req;
+	atomic_t			notify_count;
+};
+
+static inline struct f_rndis *func_to_rndis(struct usb_function *f)
+{
+	return container_of(f, struct f_rndis, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static unsigned int bitrate(struct usb_gadget *g)
+{
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 13 * 1024 * 8 * 1000 * 8;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 * 64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC	5	/* 1 << 5 == 32 msec */
+#define STATUS_BYTECOUNT		8	/* 8 bytes data */
+
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor rndis_control_intf = {
+	.bLength =		sizeof rndis_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	/* status endpoint is optional; this could be patched later */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
+	.bInterfaceProtocol =   USB_CDC_ACM_PROTO_VENDOR,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc header_desc = {
+	.bLength =		sizeof header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
+	.bLength =		sizeof call_mgmt_descriptor,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
+
+	.bmCapabilities =	0x00,
+	.bDataInterface =	0x01,
+};
+
+static struct usb_cdc_acm_descriptor rndis_acm_descriptor = {
+	.bLength =		sizeof rndis_acm_descriptor,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
+
+	.bmCapabilities =	0x00,
+};
+
+static struct usb_cdc_union_desc rndis_union_desc = {
+	.bLength =		sizeof(rndis_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+/* the data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor rndis_data_intf = {
+	.bLength =		sizeof rndis_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	/* .iInterface = DYNAMIC */
+};
+
+
+static struct usb_interface_assoc_descriptor
+rndis_iad_descriptor = {
+	.bLength =		sizeof rndis_iad_descriptor,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	.bFirstInterface =	0, /* XXX, hardcoded */
+	.bInterfaceCount = 	2,	// control + data
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_ETHERNET,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+
+static struct usb_endpoint_descriptor fs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eth_fs_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &fs_notify_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &fs_in_desc,
+	(struct usb_descriptor_header *) &fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+
+static struct usb_endpoint_descriptor hs_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eth_hs_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &hs_notify_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &hs_in_desc,
+	(struct usb_descriptor_header *) &hs_out_desc,
+	NULL,
+};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = {
+	.bLength =		sizeof ss_intr_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_bulk_comp_desc = {
+	.bLength =		sizeof ss_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *eth_ss_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &ss_notify_desc,
+	(struct usb_descriptor_header *) &ss_intr_comp_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &ss_in_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_out_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string rndis_string_defs[] = {
+	[0].s = "RNDIS Communications Control",
+	[1].s = "RNDIS Ethernet Data",
+	[2].s = "RNDIS",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings rndis_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		rndis_string_defs,
+};
+
+static struct usb_gadget_strings *rndis_strings[] = {
+	&rndis_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct sk_buff *rndis_add_header(struct gether *port,
+					struct sk_buff *skb)
+{
+	struct sk_buff *skb2;
+
+	skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+	if (skb2)
+		rndis_add_hdr(skb2);
+
+	dev_kfree_skb_any(skb);
+	return skb2;
+}
+
+static void rndis_response_available(void *_rndis)
+{
+	struct f_rndis			*rndis = _rndis;
+	struct usb_request		*req = rndis->notify_req;
+	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
+	__le32				*data = req->buf;
+	int				status;
+
+	if (atomic_inc_return(&rndis->notify_count) != 1)
+		return;
+
+	/* Send RNDIS RESPONSE_AVAILABLE notification; a
+	 * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too
+	 *
+	 * This is the only notification defined by RNDIS.
+	 */
+	data[0] = cpu_to_le32(1);
+	data[1] = cpu_to_le32(0);
+
+	status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+	if (status) {
+		atomic_dec(&rndis->notify_count);
+		DBG(cdev, "notify/0 --> %d\n", status);
+	}
+}
+
+static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_rndis			*rndis = req->context;
+	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
+	int				status = req->status;
+
+	/* after TX:
+	 *  - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control)
+	 *  - RNDIS_RESPONSE_AVAILABLE (status/irq)
+	 */
+	switch (status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		/* connection gone */
+		atomic_set(&rndis->notify_count, 0);
+		break;
+	default:
+		DBG(cdev, "RNDIS %s response error %d, %d/%d\n",
+			ep->name, status,
+			req->actual, req->length);
+		/* FALLTHROUGH */
+	case 0:
+		if (ep != rndis->notify)
+			break;
+
+		/* handle multiple pending RNDIS_RESPONSE_AVAILABLE
+		 * notifications by resending until we're done
+		 */
+		if (atomic_dec_and_test(&rndis->notify_count))
+			break;
+		status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+		if (status) {
+			atomic_dec(&rndis->notify_count);
+			DBG(cdev, "notify/1 --> %d\n", status);
+		}
+		break;
+	}
+}
+
+static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_rndis			*rndis = req->context;
+	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
+	int				status;
+
+	/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
+//	spin_lock(&dev->lock);
+	status = rndis_msg_parser(rndis->config, (u8 *) req->buf);
+	if (status < 0)
+		ERROR(cdev, "RNDIS command error %d, %d/%d\n",
+			status, req->actual, req->length);
+//	spin_unlock(&dev->lock);
+}
+
+static int
+rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+	/* RNDIS uses the CDC command encapsulation mechanism to implement
+	 * an RPC scheme, with much getting/setting of attributes by OID.
+	 */
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SEND_ENCAPSULATED_COMMAND:
+		if (w_value || w_index != rndis->ctrl_id)
+			goto invalid;
+		/* read the request; process it later */
+		value = w_length;
+		req->complete = rndis_command_complete;
+		req->context = rndis;
+		/* later, rndis_response_available() sends a notification */
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_GET_ENCAPSULATED_RESPONSE:
+		if (w_value || w_index != rndis->ctrl_id)
+			goto invalid;
+		else {
+			u8 *buf;
+			u32 n;
+
+			/* return the result */
+			buf = rndis_get_next_response(rndis->config, &n);
+			if (buf) {
+				memcpy(req->buf, buf, n);
+				req->complete = rndis_response_complete;
+				req->context = rndis;
+				rndis_free_response(rndis->config, buf);
+				value = n;
+			}
+			/* else stalls ... spec says to avoid that */
+		}
+		break;
+
+	default:
+invalid:
+		VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = (value < w_length);
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "rndis response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* we know alt == 0 */
+
+	if (intf == rndis->ctrl_id) {
+		if (rndis->notify->driver_data) {
+			VDBG(cdev, "reset rndis control %d\n", intf);
+			usb_ep_disable(rndis->notify);
+		}
+		if (!rndis->notify->desc) {
+			VDBG(cdev, "init rndis ctrl %d\n", intf);
+			if (config_ep_by_speed(cdev->gadget, f, rndis->notify))
+				goto fail;
+		}
+		usb_ep_enable(rndis->notify);
+		rndis->notify->driver_data = rndis;
+
+	} else if (intf == rndis->data_id) {
+		struct net_device	*net;
+
+		if (rndis->port.in_ep->driver_data) {
+			DBG(cdev, "reset rndis\n");
+			gether_disconnect(&rndis->port);
+		}
+
+		if (!rndis->port.in_ep->desc || !rndis->port.out_ep->desc) {
+			DBG(cdev, "init rndis\n");
+			if (config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.out_ep)) {
+				rndis->port.in_ep->desc = NULL;
+				rndis->port.out_ep->desc = NULL;
+				goto fail;
+			}
+		}
+
+		/* Avoid ZLPs; they can be troublesome. */
+		rndis->port.is_zlp_ok = false;
+
+		/* RNDIS should be in the "RNDIS uninitialized" state,
+		 * either never activated or after rndis_uninit().
+		 *
+		 * We don't want data to flow here until a nonzero packet
+		 * filter is set, at which point it enters "RNDIS data
+		 * initialized" state ... but we do want the endpoints
+		 * to be activated.  It's a strange little state.
+		 *
+		 * REVISIT the RNDIS gadget code has done this wrong for a
+		 * very long time.  We need another call to the link layer
+		 * code -- gether_updown(...bool) maybe -- to do it right.
+		 */
+		rndis->port.cdc_filter = 0;
+
+		DBG(cdev, "RNDIS RX/TX early activation ... \n");
+		net = gether_connect(&rndis->port);
+		if (IS_ERR(net))
+			return PTR_ERR(net);
+
+		rndis_set_param_dev(rndis->config, net,
+				&rndis->port.cdc_filter);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+static void rndis_disable(struct usb_function *f)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (!rndis->notify->driver_data)
+		return;
+
+	DBG(cdev, "rndis deactivated\n");
+
+	rndis_uninit(rndis->config);
+	gether_disconnect(&rndis->port);
+
+	usb_ep_disable(rndis->notify);
+	rndis->notify->driver_data = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This isn't quite the same mechanism as CDC Ethernet, since the
+ * notification scheme passes less data, but the same set of link
+ * states must be tested.  A key difference is that altsettings are
+ * not used to tell whether the link should send packets or not.
+ */
+
+static void rndis_open(struct gether *geth)
+{
+	struct f_rndis		*rndis = func_to_rndis(&geth->func);
+	struct usb_composite_dev *cdev = geth->func.config->cdev;
+
+	DBG(cdev, "%s\n", __func__);
+
+	rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3,
+				bitrate(cdev->gadget) / 100);
+	rndis_signal_connect(rndis->config);
+}
+
+static void rndis_close(struct gether *geth)
+{
+	struct f_rndis		*rndis = func_to_rndis(&geth->func);
+
+	DBG(geth->func.config->cdev, "%s\n", __func__);
+
+	rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0);
+	rndis_signal_disconnect(rndis->config);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int
+rndis_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_rndis		*rndis = func_to_rndis(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	rndis->ctrl_id = status;
+	rndis_iad_descriptor.bFirstInterface = status;
+
+	rndis_control_intf.bInterfaceNumber = status;
+	rndis_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	rndis->data_id = status;
+
+	rndis_data_intf.bInterfaceNumber = status;
+	rndis_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc);
+	if (!ep)
+		goto fail;
+	rndis->port.in_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc);
+	if (!ep)
+		goto fail;
+	rndis->port.out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	/* NOTE:  a status/notification endpoint is, strictly speaking,
+	 * optional.  We don't treat it that way though!  It's simpler,
+	 * and some newer profiles don't treat it as optional.
+	 */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc);
+	if (!ep)
+		goto fail;
+	rndis->notify = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!rndis->notify_req)
+		goto fail;
+	rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!rndis->notify_req->buf)
+		goto fail;
+	rndis->notify_req->length = STATUS_BYTECOUNT;
+	rndis->notify_req->context = rndis;
+	rndis->notify_req->complete = rndis_response_complete;
+
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(eth_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		hs_in_desc.bEndpointAddress =
+				fs_in_desc.bEndpointAddress;
+		hs_out_desc.bEndpointAddress =
+				fs_out_desc.bEndpointAddress;
+		hs_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
+		if (!f->hs_descriptors)
+			goto fail;
+	}
+
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_in_desc.bEndpointAddress =
+				fs_in_desc.bEndpointAddress;
+		ss_out_desc.bEndpointAddress =
+				fs_out_desc.bEndpointAddress;
+		ss_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(eth_ss_function);
+		if (!f->ss_descriptors)
+			goto fail;
+	}
+
+	rndis->port.open = rndis_open;
+	rndis->port.close = rndis_close;
+
+	status = rndis_register(rndis_response_available, rndis);
+	if (status < 0)
+		goto fail;
+	rndis->config = status;
+
+	rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0);
+	rndis_set_host_mac(rndis->config, rndis->ethaddr);
+
+	if (rndis->manufacturer && rndis->vendorID &&
+			rndis_set_param_vendor(rndis->config, rndis->vendorID,
+					       rndis->manufacturer))
+		goto fail;
+
+	/* NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			rndis->port.in_ep->name, rndis->port.out_ep->name,
+			rndis->notify->name);
+	return 0;
+
+fail:
+	if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors)
+		usb_free_descriptors(f->ss_descriptors);
+	if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors)
+		usb_free_descriptors(f->hs_descriptors);
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+
+	if (rndis->notify_req) {
+		kfree(rndis->notify_req->buf);
+		usb_ep_free_request(rndis->notify, rndis->notify_req);
+	}
+
+	/* we might as well release our claims on endpoints */
+	if (rndis->notify)
+		rndis->notify->driver_data = NULL;
+	if (rndis->port.out_ep->desc)
+		rndis->port.out_ep->driver_data = NULL;
+	if (rndis->port.in_ep->desc)
+		rndis->port.in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void
+rndis_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_rndis		*rndis = func_to_rndis(f);
+
+	rndis_deregister(rndis->config);
+	rndis_exit();
+	rndis_string_defs[0].id = 0;
+
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+
+	kfree(rndis->notify_req->buf);
+	usb_ep_free_request(rndis->notify, rndis->notify_req);
+
+	kfree(rndis);
+}
+
+/* Some controllers can't support RNDIS ... */
+static inline bool can_support_rndis(struct usb_configuration *c)
+{
+	/* everything else is *presumably* fine */
+	return true;
+}
+
+int
+rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer)
+{
+	struct f_rndis	*rndis;
+	int		status;
+
+	if (!can_support_rndis(c) || !ethaddr)
+		return -EINVAL;
+
+	/* maybe allocate device-global string IDs */
+	if (rndis_string_defs[0].id == 0) {
+
+		/* ... and setup RNDIS itself */
+		status = rndis_init();
+		if (status < 0)
+			return status;
+
+		/* control interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		rndis_string_defs[0].id = status;
+		rndis_control_intf.iInterface = status;
+
+		/* data interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		rndis_string_defs[1].id = status;
+		rndis_data_intf.iInterface = status;
+
+		/* IAD iFunction label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		rndis_string_defs[2].id = status;
+		rndis_iad_descriptor.iFunction = status;
+	}
+
+	/* allocate and initialize one new instance */
+	status = -ENOMEM;
+	rndis = kzalloc(sizeof *rndis, GFP_KERNEL);
+	if (!rndis)
+		goto fail;
+
+	memcpy(rndis->ethaddr, ethaddr, ETH_ALEN);
+	rndis->vendorID = vendorID;
+	rndis->manufacturer = manufacturer;
+
+	/* RNDIS activates when the host changes this filter */
+	rndis->port.cdc_filter = 0;
+
+	/* RNDIS has special (and complex) framing */
+	rndis->port.header_len = sizeof(struct rndis_packet_msg_type);
+	rndis->port.wrap = rndis_add_header;
+	rndis->port.unwrap = rndis_rm_hdr;
+
+	rndis->port.func.name = "rndis";
+	rndis->port.func.strings = rndis_strings;
+	/* descriptors are per-instance copies */
+	rndis->port.func.bind = rndis_bind;
+	rndis->port.func.unbind = rndis_unbind;
+	rndis->port.func.set_alt = rndis_set_alt;
+	rndis->port.func.setup = rndis_setup;
+	rndis->port.func.disable = rndis_disable;
+
+	status = usb_add_function(c, &rndis->port.func);
+	if (status) {
+		kfree(rndis);
+fail:
+		rndis_exit();
+	}
+	return status;
+}
diff --git a/drivers/staging/ccg/gadget_chips.h b/drivers/staging/ccg/gadget_chips.h
new file mode 100644
index 000000000000..0ccca58e7a8f
--- /dev/null
+++ b/drivers/staging/ccg/gadget_chips.h
@@ -0,0 +1,150 @@
+/*
+ * USB device controllers have lots of quirks.  Use these macros in
+ * gadget drivers or other code that needs to deal with them, and which
+ * autoconfigures instead of using early binding to the hardware.
+ *
+ * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
+ * some config file that gets updated as new hardware is supported.
+ * (And avoiding all runtime comparisons in typical one-choice configs!)
+ *
+ * NOTE:  some of these controller drivers may not be available yet.
+ * Some are available on 2.4 kernels; several are available, but not
+ * yet pushed in the 2.6 mainline tree.
+ */
+
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
+/*
+ * NOTICE: the entries below are alphabetical and should be kept
+ * that way.
+ *
+ * Always be sure to add new entries to the correct position or
+ * accept the bashing later.
+ *
+ * If you have forgotten the alphabetical order let VIM/EMACS
+ * do that for you.
+ */
+#define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
+#define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
+#define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
+#define gadget_is_bcm63xx(g)		(!strcmp("bcm63xx_udc", (g)->name))
+#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
+#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
+#define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
+#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
+#define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
+#define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
+#define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
+#define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
+#define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
+#define gadget_is_lpc32xx(g)		(!strcmp("lpc32xx_udc", (g)->name))
+#define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
+#define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
+#define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
+#define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
+#define gadget_is_omap(g)		(!strcmp("omap_udc", (g)->name))
+#define gadget_is_pch(g)		(!strcmp("pch_udc", (g)->name))
+#define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
+#define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
+#define gadget_is_r8a66597(g)		(!strcmp("r8a66597_udc", (g)->name))
+#define gadget_is_renesas_usbhs(g)	(!strcmp("renesas_usbhs_udc", (g)->name))
+#define gadget_is_s3c2410(g)		(!strcmp("s3c2410_udc", (g)->name))
+#define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
+#define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
+
+/**
+ * usb_gadget_controller_number - support bcdDevice id convention
+ * @gadget: the controller being driven
+ *
+ * Return a 2-digit BCD value associated with the peripheral controller,
+ * suitable for use as part of a bcdDevice value, or a negative error code.
+ *
+ * NOTE:  this convention is purely optional, and has no meaning in terms of
+ * any USB specification.  If you want to use a different convention in your
+ * gadget driver firmware -- maybe a more formal revision ID -- feel free.
+ *
+ * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
+ * to change their behavior accordingly.  For example it might help avoiding
+ * some chip bug.
+ */
+static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+{
+	if (gadget_is_net2280(gadget))
+		return 0x01;
+	else if (gadget_is_dummy(gadget))
+		return 0x02;
+	else if (gadget_is_pxa(gadget))
+		return 0x03;
+	else if (gadget_is_goku(gadget))
+		return 0x06;
+	else if (gadget_is_omap(gadget))
+		return 0x08;
+	else if (gadget_is_pxa27x(gadget))
+		return 0x11;
+	else if (gadget_is_s3c2410(gadget))
+		return 0x12;
+	else if (gadget_is_at91(gadget))
+		return 0x13;
+	else if (gadget_is_imx(gadget))
+		return 0x14;
+	else if (gadget_is_musbhdrc(gadget))
+		return 0x16;
+	else if (gadget_is_atmel_usba(gadget))
+		return 0x18;
+	else if (gadget_is_fsl_usb2(gadget))
+		return 0x19;
+	else if (gadget_is_amd5536udc(gadget))
+		return 0x20;
+	else if (gadget_is_m66592(gadget))
+		return 0x21;
+	else if (gadget_is_fsl_qe(gadget))
+		return 0x22;
+	else if (gadget_is_ci13xxx_pci(gadget))
+		return 0x23;
+	else if (gadget_is_langwell(gadget))
+		return 0x24;
+	else if (gadget_is_r8a66597(gadget))
+		return 0x25;
+	else if (gadget_is_s3c_hsotg(gadget))
+		return 0x26;
+	else if (gadget_is_pch(gadget))
+		return 0x27;
+	else if (gadget_is_ci13xxx_msm(gadget))
+		return 0x28;
+	else if (gadget_is_renesas_usbhs(gadget))
+		return 0x29;
+	else if (gadget_is_s3c_hsudc(gadget))
+		return 0x30;
+	else if (gadget_is_net2272(gadget))
+		return 0x31;
+	else if (gadget_is_dwc3(gadget))
+		return 0x32;
+	else if (gadget_is_lpc32xx(gadget))
+		return 0x33;
+	else if (gadget_is_bcm63xx(gadget))
+		return 0x34;
+
+	return -ENOENT;
+}
+
+
+/**
+ * gadget_supports_altsettings - return true if altsettings work
+ * @gadget: the gadget in question
+ */
+static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
+{
+	/* PXA 21x/25x/26x has no altsettings at all */
+	if (gadget_is_pxa(gadget))
+		return false;
+
+	/* PXA 27x and 3xx have *broken* altsetting support */
+	if (gadget_is_pxa27x(gadget))
+		return false;
+
+	/* Everything else is *presumably* fine ... */
+	return true;
+}
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/staging/ccg/ndis.h b/drivers/staging/ccg/ndis.h
new file mode 100644
index 000000000000..a19f72dec0cd
--- /dev/null
+++ b/drivers/staging/ccg/ndis.h
@@ -0,0 +1,47 @@
+/*
+ * ndis.h
+ *
+ * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
+ *
+ * Thanks to the cygwin development team,
+ * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
+ *
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ */
+
+#ifndef _LINUX_NDIS_H
+#define _LINUX_NDIS_H
+
+enum NDIS_DEVICE_POWER_STATE {
+	NdisDeviceStateUnspecified = 0,
+	NdisDeviceStateD0,
+	NdisDeviceStateD1,
+	NdisDeviceStateD2,
+	NdisDeviceStateD3,
+	NdisDeviceStateMaximum
+};
+
+struct NDIS_PM_WAKE_UP_CAPABILITIES {
+	enum NDIS_DEVICE_POWER_STATE  MinMagicPacketWakeUp;
+	enum NDIS_DEVICE_POWER_STATE  MinPatternWakeUp;
+	enum NDIS_DEVICE_POWER_STATE  MinLinkChangeWakeUp;
+};
+
+struct NDIS_PNP_CAPABILITIES {
+	__le32					Flags;
+	struct NDIS_PM_WAKE_UP_CAPABILITIES	WakeUpCapabilities;
+};
+
+struct NDIS_PM_PACKET_PATTERN {
+	__le32	Priority;
+	__le32	Reserved;
+	__le32	MaskSize;
+	__le32	PatternOffset;
+	__le32	PatternSize;
+	__le32	PatternFlags;
+};
+
+#endif /* _LINUX_NDIS_H */
diff --git a/drivers/staging/ccg/rndis.c b/drivers/staging/ccg/rndis.c
new file mode 100644
index 000000000000..e4192b887de9
--- /dev/null
+++ b/drivers/staging/ccg/rndis.c
@@ -0,0 +1,1175 @@
+/*
+ * RNDIS MSG parser
+ *
+ * Authors:	Benedikt Spranger, Pengutronix
+ *		Robert Schwebel, Pengutronix
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              version 2, as published by the Free Software Foundation.
+ *
+ *		This software was originally developed in conformance with
+ *		Microsoft's Remote NDIS Specification License Agreement.
+ *
+ * 03/12/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ *		Fixed message length bug in init_response
+ *
+ * 03/25/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ *		Fixed rndis_rm_hdr length bug.
+ *
+ * Copyright (C) 2004 by David Brownell
+ *		updates to merge with Linux 2.6, better match RNDIS spec
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/netdevice.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+
+#undef	VERBOSE_DEBUG
+
+#include "rndis.h"
+
+
+/* The driver for your USB chip needs to support ep0 OUT to work with
+ * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional).
+ *
+ * Windows hosts need an INF file like Documentation/usb/linux.inf
+ * and will be happier if you provide the host_addr module parameter.
+ */
+
+#if 0
+static int rndis_debug = 0;
+module_param (rndis_debug, int, 0);
+MODULE_PARM_DESC (rndis_debug, "enable debugging");
+#else
+#define rndis_debug		0
+#endif
+
+#define RNDIS_MAX_CONFIGS	1
+
+
+static rndis_params rndis_per_dev_params[RNDIS_MAX_CONFIGS];
+
+/* Driver Version */
+static const __le32 rndis_driver_version = cpu_to_le32(1);
+
+/* Function Prototypes */
+static rndis_resp_t *rndis_add_response(int configNr, u32 length);
+
+
+/* supported OIDs */
+static const u32 oid_supported_list[] =
+{
+	/* the general stuff */
+	RNDIS_OID_GEN_SUPPORTED_LIST,
+	RNDIS_OID_GEN_HARDWARE_STATUS,
+	RNDIS_OID_GEN_MEDIA_SUPPORTED,
+	RNDIS_OID_GEN_MEDIA_IN_USE,
+	RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
+	RNDIS_OID_GEN_LINK_SPEED,
+	RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE,
+	RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE,
+	RNDIS_OID_GEN_VENDOR_ID,
+	RNDIS_OID_GEN_VENDOR_DESCRIPTION,
+	RNDIS_OID_GEN_VENDOR_DRIVER_VERSION,
+	RNDIS_OID_GEN_CURRENT_PACKET_FILTER,
+	RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE,
+	RNDIS_OID_GEN_MEDIA_CONNECT_STATUS,
+	RNDIS_OID_GEN_PHYSICAL_MEDIUM,
+
+	/* the statistical stuff */
+	RNDIS_OID_GEN_XMIT_OK,
+	RNDIS_OID_GEN_RCV_OK,
+	RNDIS_OID_GEN_XMIT_ERROR,
+	RNDIS_OID_GEN_RCV_ERROR,
+	RNDIS_OID_GEN_RCV_NO_BUFFER,
+#ifdef	RNDIS_OPTIONAL_STATS
+	RNDIS_OID_GEN_DIRECTED_BYTES_XMIT,
+	RNDIS_OID_GEN_DIRECTED_FRAMES_XMIT,
+	RNDIS_OID_GEN_MULTICAST_BYTES_XMIT,
+	RNDIS_OID_GEN_MULTICAST_FRAMES_XMIT,
+	RNDIS_OID_GEN_BROADCAST_BYTES_XMIT,
+	RNDIS_OID_GEN_BROADCAST_FRAMES_XMIT,
+	RNDIS_OID_GEN_DIRECTED_BYTES_RCV,
+	RNDIS_OID_GEN_DIRECTED_FRAMES_RCV,
+	RNDIS_OID_GEN_MULTICAST_BYTES_RCV,
+	RNDIS_OID_GEN_MULTICAST_FRAMES_RCV,
+	RNDIS_OID_GEN_BROADCAST_BYTES_RCV,
+	RNDIS_OID_GEN_BROADCAST_FRAMES_RCV,
+	RNDIS_OID_GEN_RCV_CRC_ERROR,
+	RNDIS_OID_GEN_TRANSMIT_QUEUE_LENGTH,
+#endif	/* RNDIS_OPTIONAL_STATS */
+
+	/* mandatory 802.3 */
+	/* the general stuff */
+	RNDIS_OID_802_3_PERMANENT_ADDRESS,
+	RNDIS_OID_802_3_CURRENT_ADDRESS,
+	RNDIS_OID_802_3_MULTICAST_LIST,
+	RNDIS_OID_802_3_MAC_OPTIONS,
+	RNDIS_OID_802_3_MAXIMUM_LIST_SIZE,
+
+	/* the statistical stuff */
+	RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT,
+	RNDIS_OID_802_3_XMIT_ONE_COLLISION,
+	RNDIS_OID_802_3_XMIT_MORE_COLLISIONS,
+#ifdef	RNDIS_OPTIONAL_STATS
+	RNDIS_OID_802_3_XMIT_DEFERRED,
+	RNDIS_OID_802_3_XMIT_MAX_COLLISIONS,
+	RNDIS_OID_802_3_RCV_OVERRUN,
+	RNDIS_OID_802_3_XMIT_UNDERRUN,
+	RNDIS_OID_802_3_XMIT_HEARTBEAT_FAILURE,
+	RNDIS_OID_802_3_XMIT_TIMES_CRS_LOST,
+	RNDIS_OID_802_3_XMIT_LATE_COLLISIONS,
+#endif	/* RNDIS_OPTIONAL_STATS */
+
+#ifdef	RNDIS_PM
+	/* PM and wakeup are "mandatory" for USB, but the RNDIS specs
+	 * don't say what they mean ... and the NDIS specs are often
+	 * confusing and/or ambiguous in this context.  (That is, more
+	 * so than their specs for the other OIDs.)
+	 *
+	 * FIXME someone who knows what these should do, please
+	 * implement them!
+	 */
+
+	/* power management */
+	OID_PNP_CAPABILITIES,
+	OID_PNP_QUERY_POWER,
+	OID_PNP_SET_POWER,
+
+#ifdef	RNDIS_WAKEUP
+	/* wake up host */
+	OID_PNP_ENABLE_WAKE_UP,
+	OID_PNP_ADD_WAKE_UP_PATTERN,
+	OID_PNP_REMOVE_WAKE_UP_PATTERN,
+#endif	/* RNDIS_WAKEUP */
+#endif	/* RNDIS_PM */
+};
+
+
+/* NDIS Functions */
+static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf,
+			       unsigned buf_len, rndis_resp_t *r)
+{
+	int retval = -ENOTSUPP;
+	u32 length = 4;	/* usually */
+	__le32 *outbuf;
+	int i, count;
+	rndis_query_cmplt_type *resp;
+	struct net_device *net;
+	struct rtnl_link_stats64 temp;
+	const struct rtnl_link_stats64 *stats;
+
+	if (!r) return -ENOMEM;
+	resp = (rndis_query_cmplt_type *)r->buf;
+
+	if (!resp) return -ENOMEM;
+
+	if (buf_len && rndis_debug > 1) {
+		pr_debug("query OID %08x value, len %d:\n", OID, buf_len);
+		for (i = 0; i < buf_len; i += 16) {
+			pr_debug("%03d: %08x %08x %08x %08x\n", i,
+				get_unaligned_le32(&buf[i]),
+				get_unaligned_le32(&buf[i + 4]),
+				get_unaligned_le32(&buf[i + 8]),
+				get_unaligned_le32(&buf[i + 12]));
+		}
+	}
+
+	/* response goes here, right after the header */
+	outbuf = (__le32 *)&resp[1];
+	resp->InformationBufferOffset = cpu_to_le32(16);
+
+	net = rndis_per_dev_params[configNr].dev;
+	stats = dev_get_stats(net, &temp);
+
+	switch (OID) {
+
+	/* general oids (table 4-1) */
+
+	/* mandatory */
+	case RNDIS_OID_GEN_SUPPORTED_LIST:
+		pr_debug("%s: RNDIS_OID_GEN_SUPPORTED_LIST\n", __func__);
+		length = sizeof(oid_supported_list);
+		count  = length / sizeof(u32);
+		for (i = 0; i < count; i++)
+			outbuf[i] = cpu_to_le32(oid_supported_list[i]);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_HARDWARE_STATUS:
+		pr_debug("%s: RNDIS_OID_GEN_HARDWARE_STATUS\n", __func__);
+		/* Bogus question!
+		 * Hardware must be ready to receive high level protocols.
+		 * BTW:
+		 * reddite ergo quae sunt Caesaris Caesari
+		 * et quae sunt Dei Deo!
+		 */
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_SUPPORTED:
+		pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__);
+		*outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_IN_USE:
+		pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__);
+		/* one medium, one transport... (maybe you do it better) */
+		*outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__);
+		if (rndis_per_dev_params[configNr].dev) {
+			*outbuf = cpu_to_le32(
+				rndis_per_dev_params[configNr].dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_LINK_SPEED:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__);
+		if (rndis_per_dev_params[configNr].media_state
+				== RNDIS_MEDIA_STATE_DISCONNECTED)
+			*outbuf = cpu_to_le32(0);
+		else
+			*outbuf = cpu_to_le32(
+				rndis_per_dev_params[configNr].speed);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__);
+		if (rndis_per_dev_params[configNr].dev) {
+			*outbuf = cpu_to_le32(
+				rndis_per_dev_params[configNr].dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__);
+		if (rndis_per_dev_params[configNr].dev) {
+			*outbuf = cpu_to_le32(
+				rndis_per_dev_params[configNr].dev->mtu);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_VENDOR_ID:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__);
+		*outbuf = cpu_to_le32(
+			rndis_per_dev_params[configNr].vendorID);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_VENDOR_DESCRIPTION:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__);
+		if (rndis_per_dev_params[configNr].vendorDescr) {
+			length = strlen(rndis_per_dev_params[configNr].
+					vendorDescr);
+			memcpy(outbuf,
+				rndis_per_dev_params[configNr].vendorDescr,
+				length);
+		} else {
+			outbuf[0] = 0;
+		}
+		retval = 0;
+		break;
+
+	case RNDIS_OID_GEN_VENDOR_DRIVER_VERSION:
+		pr_debug("%s: RNDIS_OID_GEN_VENDOR_DRIVER_VERSION\n", __func__);
+		/* Created as LE */
+		*outbuf = rndis_driver_version;
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_CURRENT_PACKET_FILTER:
+		pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__);
+		*outbuf = cpu_to_le32(*rndis_per_dev_params[configNr].filter);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE:
+		pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__);
+		*outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__);
+		*outbuf = cpu_to_le32(rndis_per_dev_params[configNr]
+						.media_state);
+		retval = 0;
+		break;
+
+	case RNDIS_OID_GEN_PHYSICAL_MEDIUM:
+		pr_debug("%s: RNDIS_OID_GEN_PHYSICAL_MEDIUM\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* The RNDIS specification is incomplete/wrong.   Some versions
+	 * of MS-Windows expect OIDs that aren't specified there.  Other
+	 * versions emit undefined RNDIS messages. DOCUMENT ALL THESE!
+	 */
+	case RNDIS_OID_GEN_MAC_OPTIONS:		/* from WinME */
+		pr_debug("%s: RNDIS_OID_GEN_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(
+			  RNDIS_MAC_OPTION_RECEIVE_SERIALIZED
+			| RNDIS_MAC_OPTION_FULL_DUPLEX);
+		retval = 0;
+		break;
+
+	/* statistics OIDs (table 4-2) */
+
+	/* mandatory */
+	case RNDIS_OID_GEN_XMIT_OK:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_XMIT_OK\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->tx_packets
+				- stats->tx_errors - stats->tx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_OK:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_RCV_OK\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_packets
+				- stats->rx_errors - stats->rx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_XMIT_ERROR:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_XMIT_ERROR\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->tx_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_ERROR:
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_OID_GEN_RCV_ERROR\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_GEN_RCV_NO_BUFFER:
+		pr_debug("%s: RNDIS_OID_GEN_RCV_NO_BUFFER\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_dropped);
+			retval = 0;
+		}
+		break;
+
+	/* ieee802.3 OIDs (table 4-3) */
+
+	/* mandatory */
+	case RNDIS_OID_802_3_PERMANENT_ADDRESS:
+		pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__);
+		if (rndis_per_dev_params[configNr].dev) {
+			length = ETH_ALEN;
+			memcpy(outbuf,
+				rndis_per_dev_params[configNr].host_mac,
+				length);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_CURRENT_ADDRESS:
+		pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__);
+		if (rndis_per_dev_params[configNr].dev) {
+			length = ETH_ALEN;
+			memcpy(outbuf,
+				rndis_per_dev_params [configNr].host_mac,
+				length);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_MULTICAST_LIST:
+		pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__);
+		/* Multicast base address only */
+		*outbuf = cpu_to_le32(0xE0000000);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_MAXIMUM_LIST_SIZE:
+		pr_debug("%s: RNDIS_OID_802_3_MAXIMUM_LIST_SIZE\n", __func__);
+		/* Multicast base address only */
+		*outbuf = cpu_to_le32(1);
+		retval = 0;
+		break;
+
+	case RNDIS_OID_802_3_MAC_OPTIONS:
+		pr_debug("%s: RNDIS_OID_802_3_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* ieee802.3 statistics OIDs (table 4-4) */
+
+	/* mandatory */
+	case RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT:
+		pr_debug("%s: RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__);
+		if (stats) {
+			*outbuf = cpu_to_le32(stats->rx_frame_errors);
+			retval = 0;
+		}
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_XMIT_ONE_COLLISION:
+		pr_debug("%s: RNDIS_OID_802_3_XMIT_ONE_COLLISION\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	/* mandatory */
+	case RNDIS_OID_802_3_XMIT_MORE_COLLISIONS:
+		pr_debug("%s: RNDIS_OID_802_3_XMIT_MORE_COLLISIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
+		break;
+
+	default:
+		pr_warning("%s: query unknown OID 0x%08X\n",
+			 __func__, OID);
+	}
+	if (retval < 0)
+		length = 0;
+
+	resp->InformationBufferLength = cpu_to_le32(length);
+	r->length = length + sizeof(*resp);
+	resp->MessageLength = cpu_to_le32(r->length);
+	return retval;
+}
+
+static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len,
+			     rndis_resp_t *r)
+{
+	rndis_set_cmplt_type *resp;
+	int i, retval = -ENOTSUPP;
+	struct rndis_params *params;
+
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_set_cmplt_type *)r->buf;
+	if (!resp)
+		return -ENOMEM;
+
+	if (buf_len && rndis_debug > 1) {
+		pr_debug("set OID %08x value, len %d:\n", OID, buf_len);
+		for (i = 0; i < buf_len; i += 16) {
+			pr_debug("%03d: %08x %08x %08x %08x\n", i,
+				get_unaligned_le32(&buf[i]),
+				get_unaligned_le32(&buf[i + 4]),
+				get_unaligned_le32(&buf[i + 8]),
+				get_unaligned_le32(&buf[i + 12]));
+		}
+	}
+
+	params = &rndis_per_dev_params[configNr];
+	switch (OID) {
+	case RNDIS_OID_GEN_CURRENT_PACKET_FILTER:
+
+		/* these NDIS_PACKET_TYPE_* bitflags are shared with
+		 * cdc_filter; it's not RNDIS-specific
+		 * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in:
+		 *	PROMISCUOUS, DIRECTED,
+		 *	MULTICAST, ALL_MULTICAST, BROADCAST
+		 */
+		*params->filter = (u16)get_unaligned_le32(buf);
+		pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER %08x\n",
+			__func__, *params->filter);
+
+		/* this call has a significant side effect:  it's
+		 * what makes the packet flow start and stop, like
+		 * activating the CDC Ethernet altsetting.
+		 */
+		retval = 0;
+		if (*params->filter) {
+			params->state = RNDIS_DATA_INITIALIZED;
+			netif_carrier_on(params->dev);
+			if (netif_running(params->dev))
+				netif_wake_queue(params->dev);
+		} else {
+			params->state = RNDIS_INITIALIZED;
+			netif_carrier_off(params->dev);
+			netif_stop_queue(params->dev);
+		}
+		break;
+
+	case RNDIS_OID_802_3_MULTICAST_LIST:
+		/* I think we can ignore this */
+		pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__);
+		retval = 0;
+		break;
+
+	default:
+		pr_warning("%s: set unknown OID 0x%08X, size %d\n",
+			 __func__, OID, buf_len);
+	}
+
+	return retval;
+}
+
+/*
+ * Response Functions
+ */
+
+static int rndis_init_response(int configNr, rndis_init_msg_type *buf)
+{
+	rndis_init_cmplt_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	if (!params->dev)
+		return -ENOTSUPP;
+
+	r = rndis_add_response(configNr, sizeof(rndis_init_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_init_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_INIT_C);
+	resp->MessageLength = cpu_to_le32(52);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+	resp->MajorVersion = cpu_to_le32(RNDIS_MAJOR_VERSION);
+	resp->MinorVersion = cpu_to_le32(RNDIS_MINOR_VERSION);
+	resp->DeviceFlags = cpu_to_le32(RNDIS_DF_CONNECTIONLESS);
+	resp->Medium = cpu_to_le32(RNDIS_MEDIUM_802_3);
+	resp->MaxPacketsPerTransfer = cpu_to_le32(1);
+	resp->MaxTransferSize = cpu_to_le32(
+		  params->dev->mtu
+		+ sizeof(struct ethhdr)
+		+ sizeof(struct rndis_packet_msg_type)
+		+ 22);
+	resp->PacketAlignmentFactor = cpu_to_le32(0);
+	resp->AFListOffset = cpu_to_le32(0);
+	resp->AFListSize = cpu_to_le32(0);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_query_response(int configNr, rndis_query_msg_type *buf)
+{
+	rndis_query_cmplt_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	/* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */
+	if (!params->dev)
+		return -ENOTSUPP;
+
+	/*
+	 * we need more memory:
+	 * gen_ndis_query_resp expects enough space for
+	 * rndis_query_cmplt_type followed by data.
+	 * oid_supported_list is the largest data reply
+	 */
+	r = rndis_add_response(configNr,
+		sizeof(oid_supported_list) + sizeof(rndis_query_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_query_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+
+	if (gen_ndis_query_resp(configNr, le32_to_cpu(buf->OID),
+			le32_to_cpu(buf->InformationBufferOffset)
+					+ 8 + (u8 *)buf,
+			le32_to_cpu(buf->InformationBufferLength),
+			r)) {
+		/* OID not supported */
+		resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED);
+		resp->MessageLength = cpu_to_le32(sizeof *resp);
+		resp->InformationBufferLength = cpu_to_le32(0);
+		resp->InformationBufferOffset = cpu_to_le32(0);
+	} else
+		resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_set_response(int configNr, rndis_set_msg_type *buf)
+{
+	u32 BufLength, BufOffset;
+	rndis_set_cmplt_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	r = rndis_add_response(configNr, sizeof(rndis_set_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_set_cmplt_type *)r->buf;
+
+	BufLength = le32_to_cpu(buf->InformationBufferLength);
+	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
+
+#ifdef	VERBOSE_DEBUG
+	pr_debug("%s: Length: %d\n", __func__, BufLength);
+	pr_debug("%s: Offset: %d\n", __func__, BufOffset);
+	pr_debug("%s: InfoBuffer: ", __func__);
+
+	for (i = 0; i < BufLength; i++) {
+		pr_debug("%02x ", *(((u8 *) buf) + i + 8 + BufOffset));
+	}
+
+	pr_debug("\n");
+#endif
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	if (gen_ndis_set_resp(configNr, le32_to_cpu(buf->OID),
+			((u8 *)buf) + 8 + BufOffset, BufLength, r))
+		resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED);
+	else
+		resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf)
+{
+	rndis_reset_cmplt_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	r = rndis_add_response(configNr, sizeof(rndis_reset_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_reset_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_RESET_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+	/* resent information */
+	resp->AddressingReset = cpu_to_le32(1);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+static int rndis_keepalive_response(int configNr,
+				    rndis_keepalive_msg_type *buf)
+{
+	rndis_keepalive_cmplt_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	/* host "should" check only in RNDIS_DATA_INITIALIZED state */
+
+	r = rndis_add_response(configNr, sizeof(rndis_keepalive_cmplt_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_keepalive_cmplt_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C);
+	resp->MessageLength = cpu_to_le32(16);
+	resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+	resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+
+/*
+ * Device to Host Comunication
+ */
+static int rndis_indicate_status_msg(int configNr, u32 status)
+{
+	rndis_indicate_status_msg_type *resp;
+	rndis_resp_t *r;
+	struct rndis_params *params = rndis_per_dev_params + configNr;
+
+	if (params->state == RNDIS_UNINITIALIZED)
+		return -ENOTSUPP;
+
+	r = rndis_add_response(configNr,
+				sizeof(rndis_indicate_status_msg_type));
+	if (!r)
+		return -ENOMEM;
+	resp = (rndis_indicate_status_msg_type *)r->buf;
+
+	resp->MessageType = cpu_to_le32(RNDIS_MSG_INDICATE);
+	resp->MessageLength = cpu_to_le32(20);
+	resp->Status = cpu_to_le32(status);
+	resp->StatusBufferLength = cpu_to_le32(0);
+	resp->StatusBufferOffset = cpu_to_le32(0);
+
+	params->resp_avail(params->v);
+	return 0;
+}
+
+int rndis_signal_connect(int configNr)
+{
+	rndis_per_dev_params[configNr].media_state
+			= RNDIS_MEDIA_STATE_CONNECTED;
+	return rndis_indicate_status_msg(configNr,
+					  RNDIS_STATUS_MEDIA_CONNECT);
+}
+
+int rndis_signal_disconnect(int configNr)
+{
+	rndis_per_dev_params[configNr].media_state
+			= RNDIS_MEDIA_STATE_DISCONNECTED;
+	return rndis_indicate_status_msg(configNr,
+					  RNDIS_STATUS_MEDIA_DISCONNECT);
+}
+
+void rndis_uninit(int configNr)
+{
+	u8 *buf;
+	u32 length;
+
+	if (configNr >= RNDIS_MAX_CONFIGS)
+		return;
+	rndis_per_dev_params[configNr].state = RNDIS_UNINITIALIZED;
+
+	/* drain the response queue */
+	while ((buf = rndis_get_next_response(configNr, &length)))
+		rndis_free_response(configNr, buf);
+}
+
+void rndis_set_host_mac(int configNr, const u8 *addr)
+{
+	rndis_per_dev_params[configNr].host_mac = addr;
+}
+
+/*
+ * Message Parser
+ */
+int rndis_msg_parser(u8 configNr, u8 *buf)
+{
+	u32 MsgType, MsgLength;
+	__le32 *tmp;
+	struct rndis_params *params;
+
+	if (!buf)
+		return -ENOMEM;
+
+	tmp = (__le32 *)buf;
+	MsgType   = get_unaligned_le32(tmp++);
+	MsgLength = get_unaligned_le32(tmp++);
+
+	if (configNr >= RNDIS_MAX_CONFIGS)
+		return -ENOTSUPP;
+	params = &rndis_per_dev_params[configNr];
+
+	/* NOTE: RNDIS is *EXTREMELY* chatty ... Windows constantly polls for
+	 * rx/tx statistics and link status, in addition to KEEPALIVE traffic
+	 * and normal HC level polling to see if there's any IN traffic.
+	 */
+
+	/* For USB: responses may take up to 10 seconds */
+	switch (MsgType) {
+	case RNDIS_MSG_INIT:
+		pr_debug("%s: RNDIS_MSG_INIT\n",
+			__func__);
+		params->state = RNDIS_INITIALIZED;
+		return rndis_init_response(configNr,
+					(rndis_init_msg_type *)buf);
+
+	case RNDIS_MSG_HALT:
+		pr_debug("%s: RNDIS_MSG_HALT\n",
+			__func__);
+		params->state = RNDIS_UNINITIALIZED;
+		if (params->dev) {
+			netif_carrier_off(params->dev);
+			netif_stop_queue(params->dev);
+		}
+		return 0;
+
+	case RNDIS_MSG_QUERY:
+		return rndis_query_response(configNr,
+					(rndis_query_msg_type *)buf);
+
+	case RNDIS_MSG_SET:
+		return rndis_set_response(configNr,
+					(rndis_set_msg_type *)buf);
+
+	case RNDIS_MSG_RESET:
+		pr_debug("%s: RNDIS_MSG_RESET\n",
+			__func__);
+		return rndis_reset_response(configNr,
+					(rndis_reset_msg_type *)buf);
+
+	case RNDIS_MSG_KEEPALIVE:
+		/* For USB: host does this every 5 seconds */
+		if (rndis_debug > 1)
+			pr_debug("%s: RNDIS_MSG_KEEPALIVE\n",
+				__func__);
+		return rndis_keepalive_response(configNr,
+						 (rndis_keepalive_msg_type *)
+						 buf);
+
+	default:
+		/* At least Windows XP emits some undefined RNDIS messages.
+		 * In one case those messages seemed to relate to the host
+		 * suspending itself.
+		 */
+		pr_warning("%s: unknown RNDIS message 0x%08X len %d\n",
+			__func__, MsgType, MsgLength);
+		print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET,
+				     buf, MsgLength);
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+int rndis_register(void (*resp_avail)(void *v), void *v)
+{
+	u8 i;
+
+	if (!resp_avail)
+		return -EINVAL;
+
+	for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+		if (!rndis_per_dev_params[i].used) {
+			rndis_per_dev_params[i].used = 1;
+			rndis_per_dev_params[i].resp_avail = resp_avail;
+			rndis_per_dev_params[i].v = v;
+			pr_debug("%s: configNr = %d\n", __func__, i);
+			return i;
+		}
+	}
+	pr_debug("failed\n");
+
+	return -ENODEV;
+}
+
+void rndis_deregister(int configNr)
+{
+	pr_debug("%s:\n", __func__);
+
+	if (configNr >= RNDIS_MAX_CONFIGS) return;
+	rndis_per_dev_params[configNr].used = 0;
+}
+
+int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter)
+{
+	pr_debug("%s:\n", __func__);
+	if (!dev)
+		return -EINVAL;
+	if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+	rndis_per_dev_params[configNr].dev = dev;
+	rndis_per_dev_params[configNr].filter = cdc_filter;
+
+	return 0;
+}
+
+int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr)
+{
+	pr_debug("%s:\n", __func__);
+	if (!vendorDescr) return -1;
+	if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+	rndis_per_dev_params[configNr].vendorID = vendorID;
+	rndis_per_dev_params[configNr].vendorDescr = vendorDescr;
+
+	return 0;
+}
+
+int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed)
+{
+	pr_debug("%s: %u %u\n", __func__, medium, speed);
+	if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+	rndis_per_dev_params[configNr].medium = medium;
+	rndis_per_dev_params[configNr].speed = speed;
+
+	return 0;
+}
+
+void rndis_add_hdr(struct sk_buff *skb)
+{
+	struct rndis_packet_msg_type *header;
+
+	if (!skb)
+		return;
+	header = (void *)skb_push(skb, sizeof(*header));
+	memset(header, 0, sizeof *header);
+	header->MessageType = cpu_to_le32(RNDIS_MSG_PACKET);
+	header->MessageLength = cpu_to_le32(skb->len);
+	header->DataOffset = cpu_to_le32(36);
+	header->DataLength = cpu_to_le32(skb->len - sizeof(*header));
+}
+
+void rndis_free_response(int configNr, u8 *buf)
+{
+	rndis_resp_t *r;
+	struct list_head *act, *tmp;
+
+	list_for_each_safe(act, tmp,
+			&(rndis_per_dev_params[configNr].resp_queue))
+	{
+		r = list_entry(act, rndis_resp_t, list);
+		if (r && r->buf == buf) {
+			list_del(&r->list);
+			kfree(r);
+		}
+	}
+}
+
+u8 *rndis_get_next_response(int configNr, u32 *length)
+{
+	rndis_resp_t *r;
+	struct list_head *act, *tmp;
+
+	if (!length) return NULL;
+
+	list_for_each_safe(act, tmp,
+			&(rndis_per_dev_params[configNr].resp_queue))
+	{
+		r = list_entry(act, rndis_resp_t, list);
+		if (!r->send) {
+			r->send = 1;
+			*length = r->length;
+			return r->buf;
+		}
+	}
+
+	return NULL;
+}
+
+static rndis_resp_t *rndis_add_response(int configNr, u32 length)
+{
+	rndis_resp_t *r;
+
+	/* NOTE: this gets copied into ether.c USB_BUFSIZ bytes ... */
+	r = kmalloc(sizeof(rndis_resp_t) + length, GFP_ATOMIC);
+	if (!r) return NULL;
+
+	r->buf = (u8 *)(r + 1);
+	r->length = length;
+	r->send = 0;
+
+	list_add_tail(&r->list,
+		&(rndis_per_dev_params[configNr].resp_queue));
+	return r;
+}
+
+int rndis_rm_hdr(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
+{
+	/* tmp points to a struct rndis_packet_msg_type */
+	__le32 *tmp = (void *)skb->data;
+
+	/* MessageType, MessageLength */
+	if (cpu_to_le32(RNDIS_MSG_PACKET)
+			!= get_unaligned(tmp++)) {
+		dev_kfree_skb_any(skb);
+		return -EINVAL;
+	}
+	tmp++;
+
+	/* DataOffset, DataLength */
+	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) {
+		dev_kfree_skb_any(skb);
+		return -EOVERFLOW;
+	}
+	skb_trim(skb, get_unaligned_le32(tmp++));
+
+	skb_queue_tail(list, skb);
+	return 0;
+}
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static int rndis_proc_show(struct seq_file *m, void *v)
+{
+	rndis_params *param = m->private;
+
+	seq_printf(m,
+			 "Config Nr. %d\n"
+			 "used      : %s\n"
+			 "state     : %s\n"
+			 "medium    : 0x%08X\n"
+			 "speed     : %d\n"
+			 "cable     : %s\n"
+			 "vendor ID : 0x%08X\n"
+			 "vendor    : %s\n",
+			 param->confignr, (param->used) ? "y" : "n",
+			 ({ char *s = "?";
+			 switch (param->state) {
+			 case RNDIS_UNINITIALIZED:
+				s = "RNDIS_UNINITIALIZED"; break;
+			 case RNDIS_INITIALIZED:
+				s = "RNDIS_INITIALIZED"; break;
+			 case RNDIS_DATA_INITIALIZED:
+				s = "RNDIS_DATA_INITIALIZED"; break;
+			}; s; }),
+			 param->medium,
+			 (param->media_state) ? 0 : param->speed*100,
+			 (param->media_state) ? "disconnected" : "connected",
+			 param->vendorID, param->vendorDescr);
+	return 0;
+}
+
+static ssize_t rndis_proc_write(struct file *file, const char __user *buffer,
+				size_t count, loff_t *ppos)
+{
+	rndis_params *p = PDE(file->f_path.dentry->d_inode)->data;
+	u32 speed = 0;
+	int i, fl_speed = 0;
+
+	for (i = 0; i < count; i++) {
+		char c;
+		if (get_user(c, buffer))
+			return -EFAULT;
+		switch (c) {
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+		case '4':
+		case '5':
+		case '6':
+		case '7':
+		case '8':
+		case '9':
+			fl_speed = 1;
+			speed = speed * 10 + c - '0';
+			break;
+		case 'C':
+		case 'c':
+			rndis_signal_connect(p->confignr);
+			break;
+		case 'D':
+		case 'd':
+			rndis_signal_disconnect(p->confignr);
+			break;
+		default:
+			if (fl_speed) p->speed = speed;
+			else pr_debug("%c is not valid\n", c);
+			break;
+		}
+
+		buffer++;
+	}
+
+	return count;
+}
+
+static int rndis_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rndis_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations rndis_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= rndis_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= rndis_proc_write,
+};
+
+#define	NAME_TEMPLATE "driver/rndis-%03d"
+
+static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+
+int rndis_init(void)
+{
+	u8 i;
+
+	for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+#ifdef	CONFIG_USB_GADGET_DEBUG_FILES
+		char name [20];
+
+		sprintf(name, NAME_TEMPLATE, i);
+		rndis_connect_state[i] = proc_create_data(name, 0660, NULL,
+					&rndis_proc_fops,
+					(void *)(rndis_per_dev_params + i));
+		if (!rndis_connect_state[i]) {
+			pr_debug("%s: remove entries", __func__);
+			while (i) {
+				sprintf(name, NAME_TEMPLATE, --i);
+				remove_proc_entry(name, NULL);
+			}
+			pr_debug("\n");
+			return -EIO;
+		}
+#endif
+		rndis_per_dev_params[i].confignr = i;
+		rndis_per_dev_params[i].used = 0;
+		rndis_per_dev_params[i].state = RNDIS_UNINITIALIZED;
+		rndis_per_dev_params[i].media_state
+				= RNDIS_MEDIA_STATE_DISCONNECTED;
+		INIT_LIST_HEAD(&(rndis_per_dev_params[i].resp_queue));
+	}
+
+	return 0;
+}
+
+void rndis_exit(void)
+{
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	u8 i;
+	char name[20];
+
+	for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+		sprintf(name, NAME_TEMPLATE, i);
+		remove_proc_entry(name, NULL);
+	}
+#endif
+}
diff --git a/drivers/staging/ccg/rndis.h b/drivers/staging/ccg/rndis.h
new file mode 100644
index 000000000000..0647f2f34e89
--- /dev/null
+++ b/drivers/staging/ccg/rndis.h
@@ -0,0 +1,222 @@
+/*
+ * RNDIS	Definitions for Remote NDIS
+ *
+ * Authors:	Benedikt Spranger, Pengutronix
+ *		Robert Schwebel, Pengutronix
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		version 2, as published by the Free Software Foundation.
+ *
+ *		This software was originally developed in conformance with
+ *		Microsoft's Remote NDIS Specification License Agreement.
+ */
+
+#ifndef _LINUX_RNDIS_H
+#define _LINUX_RNDIS_H
+
+#include <linux/rndis.h>
+#include "ndis.h"
+
+#define RNDIS_MAXIMUM_FRAME_SIZE	1518
+#define RNDIS_MAX_TOTAL_SIZE		1558
+
+typedef struct rndis_init_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	MajorVersion;
+	__le32	MinorVersion;
+	__le32	MaxTransferSize;
+} rndis_init_msg_type;
+
+typedef struct rndis_init_cmplt_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+	__le32	MajorVersion;
+	__le32	MinorVersion;
+	__le32	DeviceFlags;
+	__le32	Medium;
+	__le32	MaxPacketsPerTransfer;
+	__le32	MaxTransferSize;
+	__le32	PacketAlignmentFactor;
+	__le32	AFListOffset;
+	__le32	AFListSize;
+} rndis_init_cmplt_type;
+
+typedef struct rndis_halt_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+} rndis_halt_msg_type;
+
+typedef struct rndis_query_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	OID;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+	__le32	DeviceVcHandle;
+} rndis_query_msg_type;
+
+typedef struct rndis_query_cmplt_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+} rndis_query_cmplt_type;
+
+typedef struct rndis_set_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	OID;
+	__le32	InformationBufferLength;
+	__le32	InformationBufferOffset;
+	__le32	DeviceVcHandle;
+} rndis_set_msg_type;
+
+typedef struct rndis_set_cmplt_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+} rndis_set_cmplt_type;
+
+typedef struct rndis_reset_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Reserved;
+} rndis_reset_msg_type;
+
+typedef struct rndis_reset_cmplt_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Status;
+	__le32	AddressingReset;
+} rndis_reset_cmplt_type;
+
+typedef struct rndis_indicate_status_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	Status;
+	__le32	StatusBufferLength;
+	__le32	StatusBufferOffset;
+} rndis_indicate_status_msg_type;
+
+typedef struct rndis_keepalive_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+} rndis_keepalive_msg_type;
+
+typedef struct rndis_keepalive_cmplt_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	RequestID;
+	__le32	Status;
+} rndis_keepalive_cmplt_type;
+
+struct rndis_packet_msg_type
+{
+	__le32	MessageType;
+	__le32	MessageLength;
+	__le32	DataOffset;
+	__le32	DataLength;
+	__le32	OOBDataOffset;
+	__le32	OOBDataLength;
+	__le32	NumOOBDataElements;
+	__le32	PerPacketInfoOffset;
+	__le32	PerPacketInfoLength;
+	__le32	VcHandle;
+	__le32	Reserved;
+} __attribute__ ((packed));
+
+struct rndis_config_parameter
+{
+	__le32	ParameterNameOffset;
+	__le32	ParameterNameLength;
+	__le32	ParameterType;
+	__le32	ParameterValueOffset;
+	__le32	ParameterValueLength;
+};
+
+/* implementation specific */
+enum rndis_state
+{
+	RNDIS_UNINITIALIZED,
+	RNDIS_INITIALIZED,
+	RNDIS_DATA_INITIALIZED,
+};
+
+typedef struct rndis_resp_t
+{
+	struct list_head	list;
+	u8			*buf;
+	u32			length;
+	int			send;
+} rndis_resp_t;
+
+typedef struct rndis_params
+{
+	u8			confignr;
+	u8			used;
+	u16			saved_filter;
+	enum rndis_state	state;
+	u32			medium;
+	u32			speed;
+	u32			media_state;
+
+	const u8		*host_mac;
+	u16			*filter;
+	struct net_device	*dev;
+
+	u32			vendorID;
+	const char		*vendorDescr;
+	void			(*resp_avail)(void *v);
+	void			*v;
+	struct list_head	resp_queue;
+} rndis_params;
+
+/* RNDIS Message parser and other useless functions */
+int  rndis_msg_parser (u8 configNr, u8 *buf);
+int  rndis_register(void (*resp_avail)(void *v), void *v);
+void rndis_deregister (int configNr);
+int  rndis_set_param_dev (u8 configNr, struct net_device *dev,
+			 u16 *cdc_filter);
+int  rndis_set_param_vendor (u8 configNr, u32 vendorID,
+			    const char *vendorDescr);
+int  rndis_set_param_medium (u8 configNr, u32 medium, u32 speed);
+void rndis_add_hdr (struct sk_buff *skb);
+int rndis_rm_hdr(struct gether *port, struct sk_buff *skb,
+			struct sk_buff_head *list);
+u8   *rndis_get_next_response (int configNr, u32 *length);
+void rndis_free_response (int configNr, u8 *buf);
+
+void rndis_uninit (int configNr);
+int  rndis_signal_connect (int configNr);
+int  rndis_signal_disconnect (int configNr);
+int  rndis_state (int configNr);
+extern void rndis_set_host_mac (int configNr, const u8 *addr);
+
+int rndis_init(void);
+void rndis_exit (void);
+
+#endif  /* _LINUX_RNDIS_H */
diff --git a/drivers/staging/ccg/storage_common.c b/drivers/staging/ccg/storage_common.c
new file mode 100644
index 000000000000..8d9bcd8207c8
--- /dev/null
+++ b/drivers/staging/ccg/storage_common.c
@@ -0,0 +1,893 @@
+/*
+ * storage_common.c -- Common definitions for mass storage functionality
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyeight (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+/*
+ * This file requires the following identifiers used in USB strings to
+ * be defined (each of type pointer to char):
+ *  - fsg_string_manufacturer -- name of the manufacturer
+ *  - fsg_string_product      -- name of the product
+ *  - fsg_string_config       -- name of the configuration
+ *  - fsg_string_interface    -- name of the interface
+ * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS
+ * macro is defined prior to including this file.
+ */
+
+/*
+ * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and
+ * fsg_hs_intr_in_desc objects as well as
+ * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES
+ * macros are not defined.
+ *
+ * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER,
+ * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not
+ * defined (as well as corresponding entries in string tables are
+ * missing) and FSG_STRING_INTERFACE has value of zero.
+ *
+ * When FSG_NO_OTG is defined fsg_otg_desc won't be defined.
+ */
+
+/*
+ * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
+ * sets the number of pipeline buffers (length of the fsg_buffhd array).
+ * The valid range of num_buffers is: num >= 2 && num <= 4.
+ */
+
+
+#include <linux/usb/storage.h>
+#include <scsi/scsi.h>
+#include <asm/unaligned.h>
+
+
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define FSG_VENDOR_ID	0x0525	/* NetChip */
+#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
+
+
+/*-------------------------------------------------------------------------*/
+
+
+#ifndef DEBUG
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* !DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG	LDBG
+#else
+#define VLDBG(lun, fmt, args...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define LDBG(lun, fmt, args...)   dev_dbg (&(lun)->dev, fmt, ## args)
+#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args)
+#define LWARN(lun, fmt, args...)  dev_warn(&(lun)->dev, fmt, ## args)
+#define LINFO(lun, fmt, args...)  dev_info(&(lun)->dev, fmt, ## args)
+
+/*
+ * Keep those macros in sync with those in
+ * include/linux/usb/composite.h or else GCC will complain.  If they
+ * are identical (the same names of arguments, white spaces in the
+ * same places) GCC will allow redefinition otherwise (even if some
+ * white space is removed or added) warning will be issued.
+ *
+ * Those macros are needed here because File Storage Gadget does not
+ * include the composite.h header.  For composite gadgets those macros
+ * are redundant since composite.h is included any way.
+ *
+ * One could check whether those macros are already defined (which
+ * would indicate composite.h had been included) or not (which would
+ * indicate we were in FSG) but this is not done because a warning is
+ * desired if definitions here differ from the ones in composite.h.
+ *
+ * We want the definitions to match and be the same in File Storage
+ * Gadget as well as Mass Storage Function (and so composite gadgets
+ * using MSF).  If someone changes them in composite.h it will produce
+ * a warning in this file when building MSF.
+ */
+#define DBG(d, fmt, args...)     dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...)    dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...)   dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...)    dev_info(&(d)->gadget->dev , fmt , ## args)
+
+
+
+#ifdef DUMP_MSGS
+
+#  define dump_msg(fsg, /* const char * */ label,			\
+		   /* const u8 * */ buf, /* unsigned */ length) do {	\
+	if (length < 512) {						\
+		DBG(fsg, "%s, length %u:\n", label, length);		\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
+			       16, 1, buf, length, 0);			\
+	}								\
+} while (0)
+
+#  define dump_cdb(fsg) do { } while (0)
+
+#else
+
+#  define dump_msg(fsg, /* const char * */ label, \
+		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+
+#  ifdef VERBOSE_DEBUG
+
+#    define dump_cdb(fsg)						\
+	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
+		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
+
+#  else
+
+#    define dump_cdb(fsg) do { } while (0)
+
+#  endif /* VERBOSE_DEBUG */
+
+#endif /* DUMP_MSGS */
+
+/*-------------------------------------------------------------------------*/
+
+/* CBI Interrupt data structure */
+struct interrupt_data {
+	u8	bType;
+	u8	bValue;
+};
+
+#define CBI_INTERRUPT_DATA_LEN		2
+
+/* CBI Accept Device-Specific Command request */
+#define USB_CBI_ADSC_REQUEST		0x00
+
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE	16
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE				0
+#define SS_COMMUNICATION_FAILURE		0x040800
+#define SS_INVALID_COMMAND			0x052000
+#define SS_INVALID_FIELD_IN_CDB			0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
+#define SS_MEDIUM_NOT_PRESENT			0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
+#define SS_RESET_OCCURRED			0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
+#define SS_UNRECOVERED_READ_ERROR		0x031100
+#define SS_WRITE_ERROR				0x030c02
+#define SS_WRITE_PROTECTED			0x072700
+
+#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
+#define ASC(x)		((u8) ((x) >> 8))
+#define ASCQ(x)		((u8) (x))
+
+
+/*-------------------------------------------------------------------------*/
+
+
+struct fsg_lun {
+	struct file	*filp;
+	loff_t		file_length;
+	loff_t		num_sectors;
+
+	unsigned int	initially_ro:1;
+	unsigned int	ro:1;
+	unsigned int	removable:1;
+	unsigned int	cdrom:1;
+	unsigned int	prevent_medium_removal:1;
+	unsigned int	registered:1;
+	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
+
+	u32		sense_data;
+	u32		sense_data_info;
+	u32		unit_attention_data;
+
+	unsigned int	blkbits;	/* Bits of logical block size of bound block device */
+	unsigned int	blksize;	/* logical block size of bound block device */
+	struct device	dev;
+};
+
+#define fsg_lun_is_open(curlun)	((curlun)->filp != NULL)
+
+static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+{
+	return container_of(dev, struct fsg_lun, dev);
+}
+
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE	256
+#define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
+MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+/* check if fsg_num_buffers is within a valid range */
+static inline int fsg_num_buffers_validate(void)
+{
+	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
+		return 0;
+	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
+	       fsg_num_buffers, 2 ,4);
+	return -EINVAL;
+}
+
+/* Default size of buffer length. */
+#define FSG_BUFLEN	((u32)16384)
+
+/* Maximal number of LUNs supported in mass storage function */
+#define FSG_MAX_LUNS	8
+
+enum fsg_buffer_state {
+	BUF_STATE_EMPTY = 0,
+	BUF_STATE_FULL,
+	BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+	void				*buf;
+	enum fsg_buffer_state		state;
+	struct fsg_buffhd		*next;
+
+	/*
+	 * The NetChip 2280 is faster, and handles some protocol faults
+	 * better, if we don't submit any short bulk-out read requests.
+	 * So we will record the intended request length here.
+	 */
+	unsigned int			bulk_out_intended_length;
+
+	struct usb_request		*inreq;
+	int				inreq_busy;
+	struct usb_request		*outreq;
+	int				outreq_busy;
+};
+
+enum fsg_state {
+	/* This one isn't used anywhere */
+	FSG_STATE_COMMAND_PHASE = -10,
+	FSG_STATE_DATA_PHASE,
+	FSG_STATE_STATUS_PHASE,
+
+	FSG_STATE_IDLE = 0,
+	FSG_STATE_ABORT_BULK_OUT,
+	FSG_STATE_RESET,
+	FSG_STATE_INTERFACE_CHANGE,
+	FSG_STATE_CONFIG_CHANGE,
+	FSG_STATE_DISCONNECT,
+	FSG_STATE_EXIT,
+	FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+	DATA_DIR_UNKNOWN = 0,
+	DATA_DIR_FROM_HOST,
+	DATA_DIR_TO_HOST,
+	DATA_DIR_NONE
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+
+static inline u32 get_unaligned_be24(u8 *buf)
+{
+	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+
+enum {
+#ifndef FSG_NO_DEVICE_STRINGS
+	FSG_STRING_MANUFACTURER	= 1,
+	FSG_STRING_PRODUCT,
+	FSG_STRING_SERIAL,
+	FSG_STRING_CONFIG,
+#endif
+	FSG_STRING_INTERFACE
+};
+
+
+#ifndef FSG_NO_OTG
+static struct usb_otg_descriptor
+fsg_otg_desc = {
+	.bLength =		sizeof fsg_otg_desc,
+	.bDescriptorType =	USB_DT_OTG,
+
+	.bmAttributes =		USB_OTG_SRP,
+};
+#endif
+
+/* There is only one interface. */
+
+static struct usb_interface_descriptor
+fsg_intf_desc = {
+	.bLength =		sizeof fsg_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bNumEndpoints =	2,		/* Adjusted during fsg_bind() */
+	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
+	.bInterfaceSubClass =	USB_SC_SCSI,	/* Adjusted during fsg_bind() */
+	.bInterfaceProtocol =	USB_PR_BULK,	/* Adjusted during fsg_bind() */
+	.iInterface =		FSG_STRING_INTERFACE,
+};
+
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
+
+static struct usb_endpoint_descriptor
+fsg_fs_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	/* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_endpoint_descriptor
+fsg_fs_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	/* wMaxPacketSize set by autoconfiguration */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_fs_intr_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(2),
+	.bInterval =		32,	/* frames -> 32 ms */
+};
+
+#ifndef FSG_NO_OTG
+#  define FSG_FS_FUNCTION_PRE_EP_ENTRIES	2
+#else
+#  define FSG_FS_FUNCTION_PRE_EP_ENTRIES	1
+#endif
+
+#endif
+
+static struct usb_descriptor_header *fsg_fs_function[] = {
+#ifndef FSG_NO_OTG
+	(struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
+#ifndef FSG_NO_INTR_EP
+	(struct usb_descriptor_header *) &fsg_fs_intr_in_desc,
+#endif
+	NULL,
+};
+
+
+/*
+ * USB 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * That means alternate endpoint descriptors (bigger packets)
+ * and a "device qualifier" ... plus more construction options
+ * for the configuration descriptor.
+ */
+static struct usb_endpoint_descriptor
+fsg_hs_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor
+fsg_hs_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+	.bInterval =		1,	/* NAK every 1 uframe */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_hs_intr_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(2),
+	.bInterval =		9,	/* 2**(9-1) = 256 uframes -> 32 ms */
+};
+
+#ifndef FSG_NO_OTG
+#  define FSG_HS_FUNCTION_PRE_EP_ENTRIES	2
+#else
+#  define FSG_HS_FUNCTION_PRE_EP_ENTRIES	1
+#endif
+
+#endif
+
+static struct usb_descriptor_header *fsg_hs_function[] = {
+#ifndef FSG_NO_OTG
+	(struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
+#ifndef FSG_NO_INTR_EP
+	(struct usb_descriptor_header *) &fsg_hs_intr_in_desc,
+#endif
+	NULL,
+};
+
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_ss_intr_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(2),
+	.bInterval =		9,	/* 2**(9-1) = 256 uframes -> 32 ms */
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.wBytesPerInterval =	cpu_to_le16(2),
+};
+
+#ifndef FSG_NO_OTG
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	2
+#else
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	1
+#endif
+
+#endif
+
+static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
+	.bLength =		USB_DT_USB_EXT_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_CAP_TYPE_EXT,
+
+	.bmAttributes =		cpu_to_le32(USB_LPM_SUPPORT),
+};
+
+static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
+	.bLength =		USB_DT_USB_SS_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_SS_CAP_TYPE,
+
+	/* .bmAttributes = LTM is not supported yet */
+
+	.wSpeedSupported =	cpu_to_le16(USB_LOW_SPEED_OPERATION
+		| USB_FULL_SPEED_OPERATION
+		| USB_HIGH_SPEED_OPERATION
+		| USB_5GBPS_OPERATION),
+	.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
+	.bU1devExitLat =	USB_DEFAULT_U1_DEV_EXIT_LAT,
+	.bU2DevExitLat =	cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
+};
+
+static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
+	.bLength =		USB_DT_BOS_SIZE,
+	.bDescriptorType =	USB_DT_BOS,
+
+	.wTotalLength =		cpu_to_le16(USB_DT_BOS_SIZE
+				+ USB_DT_USB_EXT_CAP_SIZE
+				+ USB_DT_USB_SS_CAP_SIZE),
+
+	.bNumDeviceCaps =	2,
+};
+
+static struct usb_descriptor_header *fsg_ss_function[] = {
+#ifndef FSG_NO_OTG
+	(struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
+#ifndef FSG_NO_INTR_EP
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc,
+#endif
+	NULL,
+};
+
+/* Maxpacket and other transfer characteristics vary by speed. */
+static __maybe_unused struct usb_endpoint_descriptor *
+fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+		struct usb_endpoint_descriptor *hs,
+		struct usb_endpoint_descriptor *ss)
+{
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return ss;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return hs;
+	return fs;
+}
+
+
+/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
+static struct usb_string		fsg_strings[] = {
+#ifndef FSG_NO_DEVICE_STRINGS
+	{FSG_STRING_MANUFACTURER,	fsg_string_manufacturer},
+	{FSG_STRING_PRODUCT,		fsg_string_product},
+	{FSG_STRING_SERIAL,		""},
+	{FSG_STRING_CONFIG,		fsg_string_config},
+#endif
+	{FSG_STRING_INTERFACE,		fsg_string_interface},
+	{}
+};
+
+static struct usb_gadget_strings	fsg_stringtab = {
+	.language	= 0x0409,		/* en-us */
+	.strings	= fsg_strings,
+};
+
+
+ /*-------------------------------------------------------------------------*/
+
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
+
+static void fsg_lun_close(struct fsg_lun *curlun)
+{
+	if (curlun->filp) {
+		LDBG(curlun, "close backing file\n");
+		fput(curlun->filp);
+		curlun->filp = NULL;
+	}
+}
+
+
+static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
+{
+	int				ro;
+	struct file			*filp = NULL;
+	int				rc = -EINVAL;
+	struct inode			*inode = NULL;
+	loff_t				size;
+	loff_t				num_sectors;
+	loff_t				min_sectors;
+	unsigned int			blkbits;
+	unsigned int			blksize;
+
+	/* R/W if we can, R/O if we must */
+	ro = curlun->initially_ro;
+	if (!ro) {
+		filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
+		if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
+			ro = 1;
+	}
+	if (ro)
+		filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
+	if (IS_ERR(filp)) {
+		LINFO(curlun, "unable to open backing file: %s\n", filename);
+		return PTR_ERR(filp);
+	}
+
+	if (!(filp->f_mode & FMODE_WRITE))
+		ro = 1;
+
+	inode = filp->f_path.dentry->d_inode;
+	if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
+		LINFO(curlun, "invalid file type: %s\n", filename);
+		goto out;
+	}
+
+	/*
+	 * If we can't read the file, it's no good.
+	 * If we can't write the file, use it read-only.
+	 */
+	if (!(filp->f_op->read || filp->f_op->aio_read)) {
+		LINFO(curlun, "file not readable: %s\n", filename);
+		goto out;
+	}
+	if (!(filp->f_op->write || filp->f_op->aio_write))
+		ro = 1;
+
+	size = i_size_read(inode->i_mapping->host);
+	if (size < 0) {
+		LINFO(curlun, "unable to find file size: %s\n", filename);
+		rc = (int) size;
+		goto out;
+	}
+
+	if (curlun->cdrom) {
+		blksize = 2048;
+		blkbits = 11;
+	} else if (inode->i_bdev) {
+		blksize = bdev_logical_block_size(inode->i_bdev);
+		blkbits = blksize_bits(blksize);
+	} else {
+		blksize = 512;
+		blkbits = 9;
+	}
+
+	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
+	min_sectors = 1;
+	if (curlun->cdrom) {
+		min_sectors = 300;	/* Smallest track is 300 frames */
+		if (num_sectors >= 256*60*75) {
+			num_sectors = 256*60*75 - 1;
+			LINFO(curlun, "file too big: %s\n", filename);
+			LINFO(curlun, "using only first %d blocks\n",
+					(int) num_sectors);
+		}
+	}
+	if (num_sectors < min_sectors) {
+		LINFO(curlun, "file too small: %s\n", filename);
+		rc = -ETOOSMALL;
+		goto out;
+	}
+
+	if (fsg_lun_is_open(curlun))
+		fsg_lun_close(curlun);
+
+	curlun->blksize = blksize;
+	curlun->blkbits = blkbits;
+	curlun->ro = ro;
+	curlun->filp = filp;
+	curlun->file_length = size;
+	curlun->num_sectors = num_sectors;
+	LDBG(curlun, "open backing file: %s\n", filename);
+	return 0;
+
+out:
+	fput(filp);
+	return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
+static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
+{
+	struct file	*filp = curlun->filp;
+
+	if (curlun->ro || !filp)
+		return 0;
+	return vfs_fsync(filp, 1);
+}
+
+static void store_cdrom_address(u8 *dest, int msf, u32 addr)
+{
+	if (msf) {
+		/* Convert to Minutes-Seconds-Frames */
+		addr >>= 2;		/* Convert to 2048-byte frames */
+		addr += 2*75;		/* Lead-in occupies 2 seconds */
+		dest[3] = addr % 75;	/* Frames */
+		addr /= 75;
+		dest[2] = addr % 60;	/* Seconds */
+		addr /= 60;
+		dest[1] = addr;		/* Minutes */
+		dest[0] = 0;		/* Reserved */
+	} else {
+		/* Absolute sector */
+		put_unaligned_be32(addr, dest);
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+
+static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+
+	return sprintf(buf, "%d\n", fsg_lun_is_open(curlun)
+				  ? curlun->ro
+				  : curlun->initially_ro);
+}
+
+static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+
+	return sprintf(buf, "%u\n", curlun->nofua);
+}
+
+static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+	char		*p;
+	ssize_t		rc;
+
+	down_read(filesem);
+	if (fsg_lun_is_open(curlun)) {	/* Get the complete pathname */
+		p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1);
+		if (IS_ERR(p))
+			rc = PTR_ERR(p);
+		else {
+			rc = strlen(p);
+			memmove(buf, p, rc);
+			buf[rc] = '\n';		/* Add a newline */
+			buf[++rc] = 0;
+		}
+	} else {				/* No file, return 0 bytes */
+		*buf = 0;
+		rc = 0;
+	}
+	up_read(filesem);
+	return rc;
+}
+
+
+static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	ssize_t		rc;
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+	unsigned	ro;
+
+	rc = kstrtouint(buf, 2, &ro);
+	if (rc)
+		return rc;
+
+	/*
+	 * Allow the write-enable status to change only while the
+	 * backing file is closed.
+	 */
+	down_read(filesem);
+	if (fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "read-only status change prevented\n");
+		rc = -EBUSY;
+	} else {
+		curlun->ro = ro;
+		curlun->initially_ro = ro;
+		LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+		rc = count;
+	}
+	up_read(filesem);
+	return rc;
+}
+
+static ssize_t fsg_store_nofua(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+	unsigned	nofua;
+	int		ret;
+
+	ret = kstrtouint(buf, 2, &nofua);
+	if (ret)
+		return ret;
+
+	/* Sync data when switching from async mode to sync */
+	if (!nofua && curlun->nofua)
+		fsg_lun_fsync_sub(curlun);
+
+	curlun->nofua = nofua;
+
+	return count;
+}
+
+static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
+	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
+	int		rc = 0;
+
+	if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "eject attempt prevented\n");
+		return -EBUSY;				/* "Door is locked" */
+	}
+
+	/* Remove a trailing newline */
+	if (count > 0 && buf[count-1] == '\n')
+		((char *) buf)[count-1] = 0;		/* Ugh! */
+
+	/* Load new medium */
+	down_write(filesem);
+	if (count > 0 && buf[0]) {
+		/* fsg_lun_open() will close existing file if any. */
+		rc = fsg_lun_open(curlun, buf);
+		if (rc == 0)
+			curlun->unit_attention_data =
+					SS_NOT_READY_TO_READY_TRANSITION;
+	} else if (fsg_lun_is_open(curlun)) {
+		fsg_lun_close(curlun);
+		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+	}
+	up_write(filesem);
+	return (rc < 0 ? rc : count);
+}
diff --git a/drivers/staging/ccg/u_ether.c b/drivers/staging/ccg/u_ether.c
new file mode 100644
index 000000000000..1154a99dc8db
--- /dev/null
+++ b/drivers/staging/ccg/u_ether.c
@@ -0,0 +1,986 @@
+/*
+ * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+
+#include "u_ether.h"
+
+
+/*
+ * This component encapsulates the Ethernet link glue needed to provide
+ * one (!) network link through the USB gadget stack, normally "usb0".
+ *
+ * The control and data models are handled by the function driver which
+ * connects to this code; such as CDC Ethernet (ECM or EEM),
+ * "CDC Subset", or RNDIS.  That includes all descriptor and endpoint
+ * management.
+ *
+ * Link level addressing is handled by this component using module
+ * parameters; if no such parameters are provided, random link level
+ * addresses are used.  Each end of the link uses one address.  The
+ * host end address is exported in various ways, and is often recorded
+ * in configuration databases.
+ *
+ * The driver which assembles each configuration using such a link is
+ * responsible for ensuring that each configuration includes at most one
+ * instance of is network link.  (The network layer provides ways for
+ * this single "physical" link to be used by multiple virtual links.)
+ */
+
+#define UETH__VERSION	"29-May-2008"
+
+struct eth_dev {
+	/* lock is held while accessing port_usb
+	 * or updating its backlink port_usb->ioport
+	 */
+	spinlock_t		lock;
+	struct gether		*port_usb;
+
+	struct net_device	*net;
+	struct usb_gadget	*gadget;
+
+	spinlock_t		req_lock;	/* guard {rx,tx}_reqs */
+	struct list_head	tx_reqs, rx_reqs;
+	atomic_t		tx_qlen;
+
+	struct sk_buff_head	rx_frames;
+
+	unsigned		header_len;
+	struct sk_buff		*(*wrap)(struct gether *, struct sk_buff *skb);
+	int			(*unwrap)(struct gether *,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
+
+	struct work_struct	work;
+
+	unsigned long		todo;
+#define	WORK_RX_MEMORY		0
+
+	bool			zlp;
+	u8			host_mac[ETH_ALEN];
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define RX_EXTRA	20	/* bytes guarding against rx overflows */
+
+#define DEFAULT_QLEN	2	/* double buffering by default */
+
+static unsigned qmult = 5;
+module_param(qmult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
+
+/* for dual-speed hardware, use deeper queues at high/super speed */
+static inline int qlen(struct usb_gadget *gadget)
+{
+	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
+					    gadget->speed == USB_SPEED_SUPER))
+		return qmult * DEFAULT_QLEN;
+	else
+		return DEFAULT_QLEN;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* REVISIT there must be a better way than having two sets
+ * of debug calls ...
+ */
+
+#undef DBG
+#undef VDBG
+#undef ERROR
+#undef INFO
+
+#define xprintk(d, level, fmt, args...) \
+	printk(level "%s: " fmt , (d)->net->name , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DBG(dev, fmt, args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev, fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VDBG	DBG
+#else
+#define VDBG(dev, fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev, fmt, args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define INFO(dev, fmt, args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
+
+static int ueth_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+	unsigned long	flags;
+	int		status = 0;
+
+	/* don't change MTU on "live" link (peer won't know) */
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb)
+		status = -EBUSY;
+	else if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
+		status = -ERANGE;
+	else
+		net->mtu = new_mtu;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+
+	strlcpy(p->driver, "g_ether", sizeof p->driver);
+	strlcpy(p->version, UETH__VERSION, sizeof p->version);
+	strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
+	strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
+}
+
+/* REVISIT can also support:
+ *   - WOL (by tracking suspends and issuing remote wakeup)
+ *   - msglevel (implies updated messaging)
+ *   - ... probably more ethtool ops
+ */
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = eth_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+};
+
+static void defer_kevent(struct eth_dev *dev, int flag)
+{
+	if (test_and_set_bit(flag, &dev->todo))
+		return;
+	if (!schedule_work(&dev->work))
+		ERROR(dev, "kevent %d may have been dropped\n", flag);
+	else
+		DBG(dev, "kevent %d scheduled\n", flag);
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req);
+
+static int
+rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
+{
+	struct sk_buff	*skb;
+	int		retval = -ENOMEM;
+	size_t		size = 0;
+	struct usb_ep	*out;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb)
+		out = dev->port_usb->out_ep;
+	else
+		out = NULL;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!out)
+		return -ENOTCONN;
+
+
+	/* Padding up to RX_EXTRA handles minor disagreements with host.
+	 * Normally we use the USB "terminate on short read" convention;
+	 * so allow up to (N*maxpacket), since that memory is normally
+	 * already allocated.  Some hardware doesn't deal well with short
+	 * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
+	 * byte off the end (to force hardware errors on overflow).
+	 *
+	 * RNDIS uses internal framing, and explicitly allows senders to
+	 * pad to end-of-packet.  That's potentially nice for speed, but
+	 * means receivers can't recover lost synch on their own (because
+	 * new packets don't only start after a short RX).
+	 */
+	size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
+	size += dev->port_usb->header_len;
+	size += out->maxpacket - 1;
+	size -= size % out->maxpacket;
+
+	if (dev->port_usb->is_fixed)
+		size = max_t(size_t, size, dev->port_usb->fixed_out_len);
+
+	skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
+	if (skb == NULL) {
+		DBG(dev, "no rx skb\n");
+		goto enomem;
+	}
+
+	/* Some platforms perform better when IP packets are aligned,
+	 * but on at least one, checksumming fails otherwise.  Note:
+	 * RNDIS headers involve variable numbers of LE32 values.
+	 */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	req->buf = skb->data;
+	req->length = size;
+	req->complete = rx_complete;
+	req->context = skb;
+
+	retval = usb_ep_queue(out, req, gfp_flags);
+	if (retval == -ENOMEM)
+enomem:
+		defer_kevent(dev, WORK_RX_MEMORY);
+	if (retval) {
+		DBG(dev, "rx submit --> %d\n", retval);
+		if (skb)
+			dev_kfree_skb_any(skb);
+		spin_lock_irqsave(&dev->req_lock, flags);
+		list_add(&req->list, &dev->rx_reqs);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+	}
+	return retval;
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct sk_buff	*skb = req->context, *skb2;
+	struct eth_dev	*dev = ep->driver_data;
+	int		status = req->status;
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		skb_put(skb, req->actual);
+
+		if (dev->unwrap) {
+			unsigned long	flags;
+
+			spin_lock_irqsave(&dev->lock, flags);
+			if (dev->port_usb) {
+				status = dev->unwrap(dev->port_usb,
+							skb,
+							&dev->rx_frames);
+			} else {
+				dev_kfree_skb_any(skb);
+				status = -ENOTCONN;
+			}
+			spin_unlock_irqrestore(&dev->lock, flags);
+		} else {
+			skb_queue_tail(&dev->rx_frames, skb);
+		}
+		skb = NULL;
+
+		skb2 = skb_dequeue(&dev->rx_frames);
+		while (skb2) {
+			if (status < 0
+					|| ETH_HLEN > skb2->len
+					|| skb2->len > ETH_FRAME_LEN) {
+				dev->net->stats.rx_errors++;
+				dev->net->stats.rx_length_errors++;
+				DBG(dev, "rx length %d\n", skb2->len);
+				dev_kfree_skb_any(skb2);
+				goto next_frame;
+			}
+			skb2->protocol = eth_type_trans(skb2, dev->net);
+			dev->net->stats.rx_packets++;
+			dev->net->stats.rx_bytes += skb2->len;
+
+			/* no buffer copies needed, unless hardware can't
+			 * use skb buffers.
+			 */
+			status = netif_rx(skb2);
+next_frame:
+			skb2 = skb_dequeue(&dev->rx_frames);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		goto quiesce;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		defer_kevent(dev, WORK_RX_MEMORY);
+quiesce:
+		dev_kfree_skb_any(skb);
+		goto clean;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		dev->net->stats.rx_over_errors++;
+		/* FALLTHROUGH */
+
+	default:
+		dev->net->stats.rx_errors++;
+		DBG(dev, "rx status %d\n", status);
+		break;
+	}
+
+	if (skb)
+		dev_kfree_skb_any(skb);
+	if (!netif_running(dev->net)) {
+clean:
+		spin_lock(&dev->req_lock);
+		list_add(&req->list, &dev->rx_reqs);
+		spin_unlock(&dev->req_lock);
+		req = NULL;
+	}
+	if (req)
+		rx_submit(dev, req, GFP_ATOMIC);
+}
+
+static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
+{
+	unsigned		i;
+	struct usb_request	*req;
+
+	if (!n)
+		return -ENOMEM;
+
+	/* queue/recycle up to N requests */
+	i = n;
+	list_for_each_entry(req, list, list) {
+		if (i-- == 0)
+			goto extra;
+	}
+	while (i--) {
+		req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+		if (!req)
+			return list_empty(list) ? -ENOMEM : 0;
+		list_add(&req->list, list);
+	}
+	return 0;
+
+extra:
+	/* free extras */
+	for (;;) {
+		struct list_head	*next;
+
+		next = req->list.next;
+		list_del(&req->list);
+		usb_ep_free_request(ep, req);
+
+		if (next == list)
+			break;
+
+		req = container_of(next, struct usb_request, list);
+	}
+	return 0;
+}
+
+static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
+{
+	int	status;
+
+	spin_lock(&dev->req_lock);
+	status = prealloc(&dev->tx_reqs, link->in_ep, n);
+	if (status < 0)
+		goto fail;
+	status = prealloc(&dev->rx_reqs, link->out_ep, n);
+	if (status < 0)
+		goto fail;
+	goto done;
+fail:
+	DBG(dev, "can't alloc requests\n");
+done:
+	spin_unlock(&dev->req_lock);
+	return status;
+}
+
+static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+	unsigned long		flags;
+
+	/* fill unused rxq slots with some skb */
+	spin_lock_irqsave(&dev->req_lock, flags);
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+
+		if (rx_submit(dev, req, gfp_flags) < 0) {
+			defer_kevent(dev, WORK_RX_MEMORY);
+			return;
+		}
+
+		spin_lock_irqsave(&dev->req_lock, flags);
+	}
+	spin_unlock_irqrestore(&dev->req_lock, flags);
+}
+
+static void eth_work(struct work_struct *work)
+{
+	struct eth_dev	*dev = container_of(work, struct eth_dev, work);
+
+	if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) {
+		if (netif_running(dev->net))
+			rx_fill(dev, GFP_KERNEL);
+	}
+
+	if (dev->todo)
+		DBG(dev, "work done, flags = 0x%lx\n", dev->todo);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct sk_buff	*skb = req->context;
+	struct eth_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		dev->net->stats.tx_errors++;
+		VDBG(dev, "tx err %d\n", req->status);
+		/* FALLTHROUGH */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		break;
+	case 0:
+		dev->net->stats.tx_bytes += skb->len;
+	}
+	dev->net->stats.tx_packets++;
+
+	spin_lock(&dev->req_lock);
+	list_add(&req->list, &dev->tx_reqs);
+	spin_unlock(&dev->req_lock);
+	dev_kfree_skb_any(skb);
+
+	atomic_dec(&dev->tx_qlen);
+	if (netif_carrier_ok(dev->net))
+		netif_wake_queue(dev->net);
+}
+
+static inline int is_promisc(u16 cdc_filter)
+{
+	return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
+static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
+					struct net_device *net)
+{
+	struct eth_dev		*dev = netdev_priv(net);
+	int			length = skb->len;
+	int			retval;
+	struct usb_request	*req = NULL;
+	unsigned long		flags;
+	struct usb_ep		*in;
+	u16			cdc_filter;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb) {
+		in = dev->port_usb->in_ep;
+		cdc_filter = dev->port_usb->cdc_filter;
+	} else {
+		in = NULL;
+		cdc_filter = 0;
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!in) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* apply outgoing CDC or RNDIS filters */
+	if (!is_promisc(cdc_filter)) {
+		u8		*dest = skb->data;
+
+		if (is_multicast_ether_addr(dest)) {
+			u16	type;
+
+			/* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+			 * SET_ETHERNET_MULTICAST_FILTERS requests
+			 */
+			if (is_broadcast_ether_addr(dest))
+				type = USB_CDC_PACKET_TYPE_BROADCAST;
+			else
+				type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+			if (!(cdc_filter & type)) {
+				dev_kfree_skb_any(skb);
+				return NETDEV_TX_OK;
+			}
+		}
+		/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+	}
+
+	spin_lock_irqsave(&dev->req_lock, flags);
+	/*
+	 * this freelist can be empty if an interrupt triggered disconnect()
+	 * and reconfigured the gadget (shutting down this queue) after the
+	 * network stack decided to xmit but before we got the spinlock.
+	 */
+	if (list_empty(&dev->tx_reqs)) {
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	req = container_of(dev->tx_reqs.next, struct usb_request, list);
+	list_del(&req->list);
+
+	/* temporarily stop TX queue when the freelist empties */
+	if (list_empty(&dev->tx_reqs))
+		netif_stop_queue(net);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
+
+	/* no buffer copies needed, unless the network stack did it
+	 * or the hardware can't use skb buffers.
+	 * or there's not enough space for extra headers we need
+	 */
+	if (dev->wrap) {
+		unsigned long	flags;
+
+		spin_lock_irqsave(&dev->lock, flags);
+		if (dev->port_usb)
+			skb = dev->wrap(dev->port_usb, skb);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (!skb)
+			goto drop;
+
+		length = skb->len;
+	}
+	req->buf = skb->data;
+	req->context = skb;
+	req->complete = tx_complete;
+
+	/* NCM requires no zlp if transfer is dwNtbInMaxSize */
+	if (dev->port_usb->is_fixed &&
+	    length == dev->port_usb->fixed_in_len &&
+	    (length % in->maxpacket) == 0)
+		req->zero = 0;
+	else
+		req->zero = 1;
+
+	/* use zlp framing on tx for strict CDC-Ether conformance,
+	 * though any robust network rx path ignores extra padding.
+	 * and some hardware doesn't like to write zlps.
+	 */
+	if (req->zero && !dev->zlp && (length % in->maxpacket) == 0)
+		length++;
+
+	req->length = length;
+
+	/* throttle high/super speed IRQ rate back slightly */
+	if (gadget_is_dualspeed(dev->gadget))
+		req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
+				     dev->gadget->speed == USB_SPEED_SUPER)
+			? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+			: 0;
+
+	retval = usb_ep_queue(in, req, GFP_ATOMIC);
+	switch (retval) {
+	default:
+		DBG(dev, "tx queue err %d\n", retval);
+		break;
+	case 0:
+		net->trans_start = jiffies;
+		atomic_inc(&dev->tx_qlen);
+	}
+
+	if (retval) {
+		dev_kfree_skb_any(skb);
+drop:
+		dev->net->stats.tx_dropped++;
+		spin_lock_irqsave(&dev->req_lock, flags);
+		if (list_empty(&dev->tx_reqs))
+			netif_start_queue(net);
+		list_add(&req->list, &dev->tx_reqs);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
+	}
+	return NETDEV_TX_OK;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
+{
+	DBG(dev, "%s\n", __func__);
+
+	/* fill the rx queue */
+	rx_fill(dev, gfp_flags);
+
+	/* and open the tx floodgates */
+	atomic_set(&dev->tx_qlen, 0);
+	netif_wake_queue(dev->net);
+}
+
+static int eth_open(struct net_device *net)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+	struct gether	*link;
+
+	DBG(dev, "%s\n", __func__);
+	if (netif_carrier_ok(dev->net))
+		eth_start(dev, GFP_KERNEL);
+
+	spin_lock_irq(&dev->lock);
+	link = dev->port_usb;
+	if (link && link->open)
+		link->open(link);
+	spin_unlock_irq(&dev->lock);
+
+	return 0;
+}
+
+static int eth_stop(struct net_device *net)
+{
+	struct eth_dev	*dev = netdev_priv(net);
+	unsigned long	flags;
+
+	VDBG(dev, "%s\n", __func__);
+	netif_stop_queue(net);
+
+	DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+		dev->net->stats.rx_packets, dev->net->stats.tx_packets,
+		dev->net->stats.rx_errors, dev->net->stats.tx_errors
+		);
+
+	/* ensure there are no more active requests */
+	spin_lock_irqsave(&dev->lock, flags);
+	if (dev->port_usb) {
+		struct gether	*link = dev->port_usb;
+
+		if (link->close)
+			link->close(link);
+
+		/* NOTE:  we have no abort-queue primitive we could use
+		 * to cancel all pending I/O.  Instead, we disable then
+		 * reenable the endpoints ... this idiom may leave toggle
+		 * wrong, but that's a self-correcting error.
+		 *
+		 * REVISIT:  we *COULD* just let the transfers complete at
+		 * their own pace; the network stack can handle old packets.
+		 * For the moment we leave this here, since it works.
+		 */
+		usb_ep_disable(link->in_ep);
+		usb_ep_disable(link->out_ep);
+		if (netif_carrier_ok(net)) {
+			DBG(dev, "host still using in/out endpoints\n");
+			usb_ep_enable(link->in_ep);
+			usb_ep_enable(link->out_ep);
+		}
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
+static char *dev_addr;
+module_param(dev_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
+
+/* this address is invisible to ifconfig */
+static char *host_addr;
+module_param(host_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
+
+static int get_ether_addr(const char *str, u8 *dev_addr)
+{
+	if (str) {
+		unsigned	i;
+
+		for (i = 0; i < 6; i++) {
+			unsigned char num;
+
+			if ((*str == '.') || (*str == ':'))
+				str++;
+			num = hex_to_bin(*str++) << 4;
+			num |= hex_to_bin(*str++);
+			dev_addr [i] = num;
+		}
+		if (is_valid_ether_addr(dev_addr))
+			return 0;
+	}
+	eth_random_addr(dev_addr);
+	return 1;
+}
+
+static struct eth_dev *the_dev;
+
+static const struct net_device_ops eth_netdev_ops = {
+	.ndo_open		= eth_open,
+	.ndo_stop		= eth_stop,
+	.ndo_start_xmit		= eth_start_xmit,
+	.ndo_change_mtu		= ueth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static struct device_type gadget_type = {
+	.name	= "gadget",
+};
+
+/**
+ * gether_setup_name - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ *	host side of the link is recorded
+ * @netname: name for network device (for example, "usb")
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns negative errno, or zero on success
+ */
+int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+		const char *netname)
+{
+	struct eth_dev		*dev;
+	struct net_device	*net;
+	int			status;
+
+	if (the_dev)
+		return -EBUSY;
+
+	net = alloc_etherdev(sizeof *dev);
+	if (!net)
+		return -ENOMEM;
+
+	dev = netdev_priv(net);
+	spin_lock_init(&dev->lock);
+	spin_lock_init(&dev->req_lock);
+	INIT_WORK(&dev->work, eth_work);
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+
+	skb_queue_head_init(&dev->rx_frames);
+
+	/* network device setup */
+	dev->net = net;
+	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
+
+	if (get_ether_addr(dev_addr, net->dev_addr))
+		dev_warn(&g->dev,
+			"using random %s ethernet address\n", "self");
+	if (get_ether_addr(host_addr, dev->host_mac))
+		dev_warn(&g->dev,
+			"using random %s ethernet address\n", "host");
+
+	if (ethaddr)
+		memcpy(ethaddr, dev->host_mac, ETH_ALEN);
+
+	net->netdev_ops = &eth_netdev_ops;
+
+	SET_ETHTOOL_OPS(net, &ops);
+
+	dev->gadget = g;
+	SET_NETDEV_DEV(net, &g->dev);
+	SET_NETDEV_DEVTYPE(net, &gadget_type);
+
+	status = register_netdev(net);
+	if (status < 0) {
+		dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
+		free_netdev(net);
+	} else {
+		INFO(dev, "MAC %pM\n", net->dev_addr);
+		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
+
+		the_dev = dev;
+
+		/* two kinds of host-initiated state changes:
+		 *  - iff DATA transfer is active, carrier is "on"
+		 *  - tx queueing enabled if open *and* carrier is "on"
+		 */
+		netif_carrier_off(net);
+	}
+
+	return status;
+}
+
+/**
+ * gether_cleanup - remove Ethernet-over-USB device
+ * Context: may sleep
+ *
+ * This is called to free all resources allocated by @gether_setup().
+ */
+void gether_cleanup(void)
+{
+	if (!the_dev)
+		return;
+
+	unregister_netdev(the_dev->net);
+	flush_work_sync(&the_dev->work);
+	free_netdev(the_dev->net);
+
+	the_dev = NULL;
+}
+
+
+/**
+ * gether_connect - notify network layer that USB link is active
+ * @link: the USB link, set up with endpoints, descriptors matching
+ *	current device speed, and any framing wrapper(s) set up.
+ * Context: irqs blocked
+ *
+ * This is called to activate endpoints and let the network layer know
+ * the connection is active ("carrier detect").  It may cause the I/O
+ * queues to open and start letting network packets flow, but will in
+ * any case activate the endpoints so that they respond properly to the
+ * USB host.
+ *
+ * Verify net_device pointer returned using IS_ERR().  If it doesn't
+ * indicate some error code (negative errno), ep->driver_data values
+ * have been overwritten.
+ */
+struct net_device *gether_connect(struct gether *link)
+{
+	struct eth_dev		*dev = the_dev;
+	int			result = 0;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	link->in_ep->driver_data = dev;
+	result = usb_ep_enable(link->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n",
+			link->in_ep->name, result);
+		goto fail0;
+	}
+
+	link->out_ep->driver_data = dev;
+	result = usb_ep_enable(link->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n",
+			link->out_ep->name, result);
+		goto fail1;
+	}
+
+	if (result == 0)
+		result = alloc_requests(dev, link, qlen(dev->gadget));
+
+	if (result == 0) {
+		dev->zlp = link->is_zlp_ok;
+		DBG(dev, "qlen %d\n", qlen(dev->gadget));
+
+		dev->header_len = link->header_len;
+		dev->unwrap = link->unwrap;
+		dev->wrap = link->wrap;
+
+		spin_lock(&dev->lock);
+		dev->port_usb = link;
+		link->ioport = dev;
+		if (netif_running(dev->net)) {
+			if (link->open)
+				link->open(link);
+		} else {
+			if (link->close)
+				link->close(link);
+		}
+		spin_unlock(&dev->lock);
+
+		netif_carrier_on(dev->net);
+		if (netif_running(dev->net))
+			eth_start(dev, GFP_ATOMIC);
+
+	/* on error, disable any endpoints  */
+	} else {
+		(void) usb_ep_disable(link->out_ep);
+fail1:
+		(void) usb_ep_disable(link->in_ep);
+	}
+fail0:
+	/* caller is responsible for cleanup on error */
+	if (result < 0)
+		return ERR_PTR(result);
+	return dev->net;
+}
+
+/**
+ * gether_disconnect - notify network layer that USB link is inactive
+ * @link: the USB link, on which gether_connect() was called
+ * Context: irqs blocked
+ *
+ * This is called to deactivate endpoints and let the network layer know
+ * the connection went inactive ("no carrier").
+ *
+ * On return, the state is as if gether_connect() had never been called.
+ * The endpoints are inactive, and accordingly without active USB I/O.
+ * Pointers to endpoint descriptors and endpoint private data are nulled.
+ */
+void gether_disconnect(struct gether *link)
+{
+	struct eth_dev		*dev = link->ioport;
+	struct usb_request	*req;
+
+	WARN_ON(!dev);
+	if (!dev)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	netif_stop_queue(dev->net);
+	netif_carrier_off(dev->net);
+
+	/* disable endpoints, forcing (synchronous) completion
+	 * of all pending i/o.  then free the request objects
+	 * and forget about the endpoints.
+	 */
+	usb_ep_disable(link->in_ep);
+	spin_lock(&dev->req_lock);
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next,
+					struct usb_request, list);
+		list_del(&req->list);
+
+		spin_unlock(&dev->req_lock);
+		usb_ep_free_request(link->in_ep, req);
+		spin_lock(&dev->req_lock);
+	}
+	spin_unlock(&dev->req_lock);
+	link->in_ep->driver_data = NULL;
+	link->in_ep->desc = NULL;
+
+	usb_ep_disable(link->out_ep);
+	spin_lock(&dev->req_lock);
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+					struct usb_request, list);
+		list_del(&req->list);
+
+		spin_unlock(&dev->req_lock);
+		usb_ep_free_request(link->out_ep, req);
+		spin_lock(&dev->req_lock);
+	}
+	spin_unlock(&dev->req_lock);
+	link->out_ep->driver_data = NULL;
+	link->out_ep->desc = NULL;
+
+	/* finish forgetting about this USB link episode */
+	dev->header_len = 0;
+	dev->unwrap = NULL;
+	dev->wrap = NULL;
+
+	spin_lock(&dev->lock);
+	dev->port_usb = NULL;
+	link->ioport = NULL;
+	spin_unlock(&dev->lock);
+}
diff --git a/drivers/staging/ccg/u_ether.h b/drivers/staging/ccg/u_ether.h
new file mode 100644
index 000000000000..6f4a1623d854
--- /dev/null
+++ b/drivers/staging/ccg/u_ether.h
@@ -0,0 +1,154 @@
+/*
+ * u_ether.h -- interface to USB gadget "ethernet link" utilities
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __U_ETHER_H
+#define __U_ETHER_H
+
+#include <linux/err.h>
+#include <linux/if_ether.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+#include "gadget_chips.h"
+
+
+/*
+ * This represents the USB side of an "ethernet" link, managed by a USB
+ * function which provides control and (maybe) framing.  Two functions
+ * in different configurations could share the same ethernet link/netdev,
+ * using different host interaction models.
+ *
+ * There is a current limitation that only one instance of this link may
+ * be present in any given configuration.  When that's a problem, network
+ * layer facilities can be used to package multiple logical links on this
+ * single "physical" one.
+ */
+struct gether {
+	struct usb_function		func;
+
+	/* updated by gether_{connect,disconnect} */
+	struct eth_dev			*ioport;
+
+	/* endpoints handle full and/or high speeds */
+	struct usb_ep			*in_ep;
+	struct usb_ep			*out_ep;
+
+	bool				is_zlp_ok;
+
+	u16				cdc_filter;
+
+	/* hooks for added framing, as needed for RNDIS and EEM. */
+	u32				header_len;
+	/* NCM requires fixed size bundles */
+	bool				is_fixed;
+	u32				fixed_out_len;
+	u32				fixed_in_len;
+	struct sk_buff			*(*wrap)(struct gether *port,
+						struct sk_buff *skb);
+	int				(*unwrap)(struct gether *port,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
+
+	/* called on network open/close */
+	void				(*open)(struct gether *);
+	void				(*close)(struct gether *);
+};
+
+#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
+			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
+			|USB_CDC_PACKET_TYPE_DIRECTED)
+
+/* variant of gether_setup that allows customizing network device name */
+int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+		const char *netname);
+
+/* netdev setup/teardown as directed by the gadget driver */
+/* gether_setup - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ *	host side of the link is recorded
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns negative errno, or zero on success
+ */
+static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+{
+	return gether_setup_name(g, ethaddr, "usb");
+}
+
+void gether_cleanup(void);
+
+/* connect/disconnect is handled by individual functions */
+struct net_device *gether_connect(struct gether *);
+void gether_disconnect(struct gether *);
+
+/* Some controllers can't support CDC Ethernet (ECM) ... */
+static inline bool can_support_ecm(struct usb_gadget *gadget)
+{
+	if (!gadget_supports_altsettings(gadget))
+		return false;
+
+	/* Everything else is *presumably* fine ... but this is a bit
+	 * chancy, so be **CERTAIN** there are no hardware issues with
+	 * your controller.  Add it above if it can't handle CDC.
+	 */
+	return true;
+}
+
+/* each configuration may bind one instance of an ethernet link */
+int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int eem_bind_config(struct usb_configuration *c);
+
+#ifdef USB_ETH_RNDIS
+
+int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer);
+
+#else
+
+static inline int
+rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer)
+{
+	return 0;
+}
+
+#endif
+
+/**
+ * rndis_bind_config - add RNDIS network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ *	side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+static inline int rndis_bind_config(struct usb_configuration *c,
+				    u8 ethaddr[ETH_ALEN])
+{
+	return rndis_bind_config_vendor(c, ethaddr, 0, NULL);
+}
+
+
+#endif /* __U_ETHER_H */
diff --git a/drivers/staging/ccg/u_serial.c b/drivers/staging/ccg/u_serial.c
new file mode 100644
index 000000000000..5b3f5fffea92
--- /dev/null
+++ b/drivers/staging/ccg/u_serial.c
@@ -0,0 +1,1341 @@
+/*
+ * u_serial.c - utilities for USB gadget "serial port"/TTY support
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This code also borrows from usbserial.c, which is
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
+ * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This component encapsulates the TTY layer glue needed to provide basic
+ * "serial port" functionality through the USB gadget stack.  Each such
+ * port is exposed through a /dev/ttyGS* node.
+ *
+ * After initialization (gserial_setup), these TTY port devices stay
+ * available until they are removed (gserial_cleanup).  Each one may be
+ * connected to a USB function (gserial_connect), or disconnected (with
+ * gserial_disconnect) when the USB host issues a config change event.
+ * Data can only flow when the port is connected to the host.
+ *
+ * A given TTY port can be made available in multiple configurations.
+ * For example, each one might expose a ttyGS0 node which provides a
+ * login application.  In one case that might use CDC ACM interface 0,
+ * while another configuration might use interface 3 for that.  The
+ * work to handle that (including descriptor management) is not part
+ * of this component.
+ *
+ * Configurations may expose more than one TTY port.  For example, if
+ * ttyGS0 provides login service, then ttyGS1 might provide dialer access
+ * for a telephone or fax link.  And ttyGS2 might be something that just
+ * needs a simple byte stream interface for some messaging protocol that
+ * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
+ */
+
+#define PREFIX	"ttyGS"
+
+/*
+ * gserial is the lifecycle interface, used by USB functions
+ * gs_port is the I/O nexus, used by the tty driver
+ * tty_struct links to the tty/filesystem framework
+ *
+ * gserial <---> gs_port ... links will be null when the USB link is
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
+ *	gserial->ioport == usb_ep->driver_data ... gs_port
+ *	gs_port->port_usb ... gserial
+ *
+ * gs_port <---> tty_struct ... links will be null when the TTY file
+ * isn't opened; managed by gs_open()/gs_close()
+ *	gserial->port_tty ... tty_struct
+ *	tty_struct->driver_data ... gserial
+ */
+
+/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
+ * next layer of buffering.  For TX that's a circular buffer; for RX
+ * consider it a NOP.  A third layer is provided by the TTY code.
+ */
+#define QUEUE_SIZE		16
+#define WRITE_BUF_SIZE		8192		/* TX only */
+
+/* circular buffer */
+struct gs_buf {
+	unsigned		buf_size;
+	char			*buf_buf;
+	char			*buf_get;
+	char			*buf_put;
+};
+
+/*
+ * The port structure holds info for each port, one for each minor number
+ * (and thus for each /dev/ node).
+ */
+struct gs_port {
+	struct tty_port		port;
+	spinlock_t		port_lock;	/* guard port_* access */
+
+	struct gserial		*port_usb;
+
+	bool			openclose;	/* open/close in progress */
+	u8			port_num;
+
+	struct list_head	read_pool;
+	int read_started;
+	int read_allocated;
+	struct list_head	read_queue;
+	unsigned		n_read;
+	struct tasklet_struct	push;
+
+	struct list_head	write_pool;
+	int write_started;
+	int write_allocated;
+	struct gs_buf		port_write_buf;
+	wait_queue_head_t	drain_wait;	/* wait while writes drain */
+
+	/* REVISIT this state ... */
+	struct usb_cdc_line_coding port_line_coding;	/* 8-N-1 etc */
+};
+
+/* increase N_PORTS if you need more */
+#define N_PORTS		4
+static struct portmaster {
+	struct mutex	lock;			/* protect open/close */
+	struct gs_port	*port;
+} ports[N_PORTS];
+static unsigned	n_ports;
+
+#define GS_CLOSE_TIMEOUT		15		/* seconds */
+
+
+
+#ifdef VERBOSE_DEBUG
+#define pr_vdebug(fmt, arg...) \
+	pr_debug(fmt, ##arg)
+#else
+#define pr_vdebug(fmt, arg...) \
+	({ if (0) pr_debug(fmt, ##arg); })
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* Circular Buffer */
+
+/*
+ * gs_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
+{
+	gb->buf_buf = kmalloc(size, GFP_KERNEL);
+	if (gb->buf_buf == NULL)
+		return -ENOMEM;
+
+	gb->buf_size = size;
+	gb->buf_put = gb->buf_buf;
+	gb->buf_get = gb->buf_buf;
+
+	return 0;
+}
+
+/*
+ * gs_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void gs_buf_free(struct gs_buf *gb)
+{
+	kfree(gb->buf_buf);
+	gb->buf_buf = NULL;
+}
+
+/*
+ * gs_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void gs_buf_clear(struct gs_buf *gb)
+{
+	gb->buf_get = gb->buf_put;
+	/* equivalent to a get of all data available */
+}
+
+/*
+ * gs_buf_data_avail
+ *
+ * Return the number of bytes of data written into the circular
+ * buffer.
+ */
+static unsigned gs_buf_data_avail(struct gs_buf *gb)
+{
+	return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
+}
+
+/*
+ * gs_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+static unsigned gs_buf_space_avail(struct gs_buf *gb)
+{
+	return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
+}
+
+/*
+ * gs_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned
+gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
+{
+	unsigned len;
+
+	len  = gs_buf_space_avail(gb);
+	if (count > len)
+		count = len;
+
+	if (count == 0)
+		return 0;
+
+	len = gb->buf_buf + gb->buf_size - gb->buf_put;
+	if (count > len) {
+		memcpy(gb->buf_put, buf, len);
+		memcpy(gb->buf_buf, buf+len, count - len);
+		gb->buf_put = gb->buf_buf + count - len;
+	} else {
+		memcpy(gb->buf_put, buf, count);
+		if (count < len)
+			gb->buf_put += count;
+		else /* count == len */
+			gb->buf_put = gb->buf_buf;
+	}
+
+	return count;
+}
+
+/*
+ * gs_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned
+gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
+{
+	unsigned len;
+
+	len = gs_buf_data_avail(gb);
+	if (count > len)
+		count = len;
+
+	if (count == 0)
+		return 0;
+
+	len = gb->buf_buf + gb->buf_size - gb->buf_get;
+	if (count > len) {
+		memcpy(buf, gb->buf_get, len);
+		memcpy(buf+len, gb->buf_buf, count - len);
+		gb->buf_get = gb->buf_buf + count - len;
+	} else {
+		memcpy(buf, gb->buf_get, count);
+		if (count < len)
+			gb->buf_get += count;
+		else /* count == len */
+			gb->buf_get = gb->buf_buf;
+	}
+
+	return count;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* I/O glue between TTY (upper) and USB function (lower) driver layers */
+
+/*
+ * gs_alloc_req
+ *
+ * Allocate a usb_request and its buffer.  Returns a pointer to the
+ * usb_request or NULL if there is an error.
+ */
+struct usb_request *
+gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
+{
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, kmalloc_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, kmalloc_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+
+/*
+ * gs_free_req
+ *
+ * Free a usb_request and its buffer.
+ */
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+/*
+ * gs_send_packet
+ *
+ * If there is data to send, a packet is built in the given
+ * buffer and the size is returned.  If there is no data to
+ * send, 0 is returned.
+ *
+ * Called with port_lock held.
+ */
+static unsigned
+gs_send_packet(struct gs_port *port, char *packet, unsigned size)
+{
+	unsigned len;
+
+	len = gs_buf_data_avail(&port->port_write_buf);
+	if (len < size)
+		size = len;
+	if (size != 0)
+		size = gs_buf_get(&port->port_write_buf, packet, size);
+	return size;
+}
+
+/*
+ * gs_start_tx
+ *
+ * This function finds available write requests, calls
+ * gs_send_packet to fill these packets with data, and
+ * continues until either there are no more write requests
+ * available or no more data to send.  This function is
+ * run whenever data arrives or write requests are available.
+ *
+ * Context: caller owns port_lock; port_usb is non-null.
+ */
+static int gs_start_tx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+	struct list_head	*pool = &port->write_pool;
+	struct usb_ep		*in = port->port_usb->in;
+	int			status = 0;
+	bool			do_tty_wake = false;
+
+	while (!list_empty(pool)) {
+		struct usb_request	*req;
+		int			len;
+
+		if (port->write_started >= QUEUE_SIZE)
+			break;
+
+		req = list_entry(pool->next, struct usb_request, list);
+		len = gs_send_packet(port, req->buf, in->maxpacket);
+		if (len == 0) {
+			wake_up_interruptible(&port->drain_wait);
+			break;
+		}
+		do_tty_wake = true;
+
+		req->length = len;
+		list_del(&req->list);
+		req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
+
+		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+				port->port_num, len, *((u8 *)req->buf),
+				*((u8 *)req->buf+1), *((u8 *)req->buf+2));
+
+		/* Drop lock while we call out of driver; completions
+		 * could be issued while we do so.  Disconnection may
+		 * happen too; maybe immediately before we queue this!
+		 *
+		 * NOTE that we may keep sending data for a while after
+		 * the TTY closed (dev->ioport->port_tty is NULL).
+		 */
+		spin_unlock(&port->port_lock);
+		status = usb_ep_queue(in, req, GFP_ATOMIC);
+		spin_lock(&port->port_lock);
+
+		if (status) {
+			pr_debug("%s: %s %s err %d\n",
+					__func__, "queue", in->name, status);
+			list_add(&req->list, pool);
+			break;
+		}
+
+		port->write_started++;
+
+		/* abort immediately after disconnect */
+		if (!port->port_usb)
+			break;
+	}
+
+	if (do_tty_wake && port->port.tty)
+		tty_wakeup(port->port.tty);
+	return status;
+}
+
+/*
+ * Context: caller owns port_lock, and port_usb is set
+ */
+static unsigned gs_start_rx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+	struct list_head	*pool = &port->read_pool;
+	struct usb_ep		*out = port->port_usb->out;
+
+	while (!list_empty(pool)) {
+		struct usb_request	*req;
+		int			status;
+		struct tty_struct	*tty;
+
+		/* no more rx if closed */
+		tty = port->port.tty;
+		if (!tty)
+			break;
+
+		if (port->read_started >= QUEUE_SIZE)
+			break;
+
+		req = list_entry(pool->next, struct usb_request, list);
+		list_del(&req->list);
+		req->length = out->maxpacket;
+
+		/* drop lock while we call out; the controller driver
+		 * may need to call us back (e.g. for disconnect)
+		 */
+		spin_unlock(&port->port_lock);
+		status = usb_ep_queue(out, req, GFP_ATOMIC);
+		spin_lock(&port->port_lock);
+
+		if (status) {
+			pr_debug("%s: %s %s err %d\n",
+					__func__, "queue", out->name, status);
+			list_add(&req->list, pool);
+			break;
+		}
+		port->read_started++;
+
+		/* abort immediately after disconnect */
+		if (!port->port_usb)
+			break;
+	}
+	return port->read_started;
+}
+
+/*
+ * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(unsigned long _port)
+{
+	struct gs_port		*port = (void *)_port;
+	struct tty_struct	*tty;
+	struct list_head	*queue = &port->read_queue;
+	bool			disconnect = false;
+	bool			do_push = false;
+
+	/* hand any queued data to the tty */
+	spin_lock_irq(&port->port_lock);
+	tty = port->port.tty;
+	while (!list_empty(queue)) {
+		struct usb_request	*req;
+
+		req = list_first_entry(queue, struct usb_request, list);
+
+		/* discard data if tty was closed */
+		if (!tty)
+			goto recycle;
+
+		/* leave data queued if tty was rx throttled */
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+
+		switch (req->status) {
+		case -ESHUTDOWN:
+			disconnect = true;
+			pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+			break;
+
+		default:
+			/* presumably a transient fault */
+			pr_warning(PREFIX "%d: unexpected RX status %d\n",
+					port->port_num, req->status);
+			/* FALLTHROUGH */
+		case 0:
+			/* normal completion */
+			break;
+		}
+
+		/* push data to (open) tty */
+		if (req->actual) {
+			char		*packet = req->buf;
+			unsigned	size = req->actual;
+			unsigned	n;
+			int		count;
+
+			/* we may have pushed part of this packet already... */
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(tty, packet, size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				/* stop pushing; TTY layer can't handle more */
+				port->n_read += count;
+				pr_vdebug(PREFIX "%d: rx block %d/%d\n",
+						port->port_num,
+						count, req->actual);
+				break;
+			}
+			port->n_read = 0;
+		}
+recycle:
+		list_move(&req->list, &port->read_pool);
+		port->read_started--;
+	}
+
+	/* Push from tty to ldisc; without low_latency set this is handled by
+	 * a workqueue, so we won't get callbacks and can hold port_lock
+	 */
+	if (tty && do_push)
+		tty_flip_buffer_push(tty);
+
+
+	/* We want our data queue to become empty ASAP, keeping data
+	 * in the tty and ldisc (not here).  If we couldn't push any
+	 * this time around, there may be trouble unless there's an
+	 * implicit tty_unthrottle() call on its way...
+	 *
+	 * REVISIT we should probably add a timer to keep the tasklet
+	 * from starving ... but it's not clear that case ever happens.
+	 */
+	if (!list_empty(queue) && tty) {
+		if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+			if (do_push)
+				tasklet_schedule(&port->push);
+			else
+				pr_warning(PREFIX "%d: RX not scheduled?\n",
+					port->port_num);
+		}
+	}
+
+	/* If we're still connected, refill the USB RX queue. */
+	if (!disconnect && port->port_usb)
+		gs_start_rx(port);
+
+	spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	/* Queue all received data until the tty layer is ready for it. */
+	spin_lock(&port->port_lock);
+	list_add_tail(&req->list, &port->read_queue);
+	tasklet_schedule(&port->push);
+	spin_unlock(&port->port_lock);
+}
+
+static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	spin_lock(&port->port_lock);
+	list_add(&req->list, &port->write_pool);
+	port->write_started--;
+
+	switch (req->status) {
+	default:
+		/* presumably a transient fault */
+		pr_warning("%s: unexpected %s status %d\n",
+				__func__, ep->name, req->status);
+		/* FALL THROUGH */
+	case 0:
+		/* normal completion */
+		gs_start_tx(port);
+		break;
+
+	case -ESHUTDOWN:
+		/* disconnect */
+		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+		break;
+	}
+
+	spin_unlock(&port->port_lock);
+}
+
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+							 int *allocated)
+{
+	struct usb_request	*req;
+
+	while (!list_empty(head)) {
+		req = list_entry(head->next, struct usb_request, list);
+		list_del(&req->list);
+		gs_free_req(ep, req);
+		if (allocated)
+			(*allocated)--;
+	}
+}
+
+static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
+		void (*fn)(struct usb_ep *, struct usb_request *),
+		int *allocated)
+{
+	int			i;
+	struct usb_request	*req;
+	int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
+
+	/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
+	 * do quite that many this time, don't fail ... we just won't
+	 * be as speedy as we might otherwise be.
+	 */
+	for (i = 0; i < n; i++) {
+		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+		if (!req)
+			return list_empty(head) ? -ENOMEM : 0;
+		req->complete = fn;
+		list_add_tail(&req->list, head);
+		if (allocated)
+			(*allocated)++;
+	}
+	return 0;
+}
+
+/**
+ * gs_start_io - start USB I/O streams
+ * @dev: encapsulates endpoints to use
+ * Context: holding port_lock; port_tty and port_usb are non-null
+ *
+ * We only start I/O when something is connected to both sides of
+ * this port.  If nothing is listening on the host side, we may
+ * be pointlessly filling up our TX buffers and FIFO.
+ */
+static int gs_start_io(struct gs_port *port)
+{
+	struct list_head	*head = &port->read_pool;
+	struct usb_ep		*ep = port->port_usb->out;
+	int			status;
+	unsigned		started;
+
+	/* Allocate RX and TX I/O buffers.  We can't easily do this much
+	 * earlier (with GFP_KERNEL) because the requests are coupled to
+	 * endpoints, as are the packet sizes we'll be using.  Different
+	 * configurations may use different endpoints with a given port;
+	 * and high speed vs full speed changes packet sizes too.
+	 */
+	status = gs_alloc_requests(ep, head, gs_read_complete,
+		&port->read_allocated);
+	if (status)
+		return status;
+
+	status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
+			gs_write_complete, &port->write_allocated);
+	if (status) {
+		gs_free_requests(ep, head, &port->read_allocated);
+		return status;
+	}
+
+	/* queue read requests */
+	port->n_read = 0;
+	started = gs_start_rx(port);
+
+	/* unblock any pending writes into our circular buffer */
+	if (started) {
+		tty_wakeup(port->port.tty);
+	} else {
+		gs_free_requests(ep, head, &port->read_allocated);
+		gs_free_requests(port->port_usb->in, &port->write_pool,
+			&port->write_allocated);
+		status = -EIO;
+	}
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* TTY Driver */
+
+/*
+ * gs_open sets up the link between a gs_port and its associated TTY.
+ * That link is broken *only* by TTY close(), and all driver methods
+ * know that.
+ */
+static int gs_open(struct tty_struct *tty, struct file *file)
+{
+	int		port_num = tty->index;
+	struct gs_port	*port;
+	int		status;
+
+	do {
+		mutex_lock(&ports[port_num].lock);
+		port = ports[port_num].port;
+		if (!port)
+			status = -ENODEV;
+		else {
+			spin_lock_irq(&port->port_lock);
+
+			/* already open?  Great. */
+			if (port->port.count) {
+				status = 0;
+				port->port.count++;
+
+			/* currently opening/closing? wait ... */
+			} else if (port->openclose) {
+				status = -EBUSY;
+
+			/* ... else we do the work */
+			} else {
+				status = -EAGAIN;
+				port->openclose = true;
+			}
+			spin_unlock_irq(&port->port_lock);
+		}
+		mutex_unlock(&ports[port_num].lock);
+
+		switch (status) {
+		default:
+			/* fully handled */
+			return status;
+		case -EAGAIN:
+			/* must do the work */
+			break;
+		case -EBUSY:
+			/* wait for EAGAIN task to finish */
+			msleep(1);
+			/* REVISIT could have a waitchannel here, if
+			 * concurrent open performance is important
+			 */
+			break;
+		}
+	} while (status != -EAGAIN);
+
+	/* Do the "real open" */
+	spin_lock_irq(&port->port_lock);
+
+	/* allocate circular buffer on first open */
+	if (port->port_write_buf.buf_buf == NULL) {
+
+		spin_unlock_irq(&port->port_lock);
+		status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
+		spin_lock_irq(&port->port_lock);
+
+		if (status) {
+			pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
+				port->port_num, tty, file);
+			port->openclose = false;
+			goto exit_unlock_port;
+		}
+	}
+
+	/* REVISIT if REMOVED (ports[].port NULL), abort the open
+	 * to let rmmod work faster (but this way isn't wrong).
+	 */
+
+	/* REVISIT maybe wait for "carrier detect" */
+
+	tty->driver_data = port;
+	port->port.tty = tty;
+
+	port->port.count = 1;
+	port->openclose = false;
+
+	/* if connected, start the I/O stream */
+	if (port->port_usb) {
+		struct gserial	*gser = port->port_usb;
+
+		pr_debug("gs_open: start ttyGS%d\n", port->port_num);
+		gs_start_io(port);
+
+		if (gser->connect)
+			gser->connect(gser);
+	}
+
+	pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
+
+	status = 0;
+
+exit_unlock_port:
+	spin_unlock_irq(&port->port_lock);
+	return status;
+}
+
+static int gs_writes_finished(struct gs_port *p)
+{
+	int cond;
+
+	/* return true on disconnect or empty buffer */
+	spin_lock_irq(&p->port_lock);
+	cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
+	spin_unlock_irq(&p->port_lock);
+
+	return cond;
+}
+
+static void gs_close(struct tty_struct *tty, struct file *file)
+{
+	struct gs_port *port = tty->driver_data;
+	struct gserial	*gser;
+
+	spin_lock_irq(&port->port_lock);
+
+	if (port->port.count != 1) {
+		if (port->port.count == 0)
+			WARN_ON(1);
+		else
+			--port->port.count;
+		goto exit;
+	}
+
+	pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
+
+	/* mark port as closing but in use; we can drop port lock
+	 * and sleep if necessary
+	 */
+	port->openclose = true;
+	port->port.count = 0;
+
+	gser = port->port_usb;
+	if (gser && gser->disconnect)
+		gser->disconnect(gser);
+
+	/* wait for circular write buffer to drain, disconnect, or at
+	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
+	 */
+	if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
+		spin_unlock_irq(&port->port_lock);
+		wait_event_interruptible_timeout(port->drain_wait,
+					gs_writes_finished(port),
+					GS_CLOSE_TIMEOUT * HZ);
+		spin_lock_irq(&port->port_lock);
+		gser = port->port_usb;
+	}
+
+	/* Iff we're disconnected, there can be no I/O in flight so it's
+	 * ok to free the circular buffer; else just scrub it.  And don't
+	 * let the push tasklet fire again until we're re-opened.
+	 */
+	if (gser == NULL)
+		gs_buf_free(&port->port_write_buf);
+	else
+		gs_buf_clear(&port->port_write_buf);
+
+	tty->driver_data = NULL;
+	port->port.tty = NULL;
+
+	port->openclose = false;
+
+	pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
+			port->port_num, tty, file);
+
+	wake_up_interruptible(&port->port.close_wait);
+exit:
+	spin_unlock_irq(&port->port_lock);
+}
+
+static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	int		status;
+
+	pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
+			port->port_num, tty, count);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (count)
+		count = gs_buf_put(&port->port_write_buf, buf, count);
+	/* treat count == 0 as flush_chars() */
+	if (port->port_usb)
+		status = gs_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return count;
+}
+
+static int gs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	int		status;
+
+	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n",
+		port->port_num, tty, ch, __builtin_return_address(0));
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	status = gs_buf_put(&port->port_write_buf, &ch, 1);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return status;
+}
+
+static void gs_flush_chars(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+
+	pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb)
+		gs_start_tx(port);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_write_room(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	int		room = 0;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb)
+		room = gs_buf_space_avail(&port->port_write_buf);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
+		port->port_num, tty, room);
+
+	return room;
+}
+
+static int gs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct gs_port	*port = tty->driver_data;
+	unsigned long	flags;
+	int		chars = 0;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	chars = gs_buf_data_avail(&port->port_write_buf);
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
+		port->port_num, tty, chars);
+
+	return chars;
+}
+
+/* undo side effects of setting TTY_THROTTLED */
+static void gs_unthrottle(struct tty_struct *tty)
+{
+	struct gs_port		*port = tty->driver_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port_usb) {
+		/* Kickstart read queue processing.  We don't do xon/xoff,
+		 * rts/cts, or other handshaking with the host, but if the
+		 * read queue backs up enough we'll be NAKing OUT packets.
+		 */
+		tasklet_schedule(&port->push);
+		pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+	}
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+	struct gs_port	*port = tty->driver_data;
+	int		status = 0;
+	struct gserial	*gser;
+
+	pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+			port->port_num, duration);
+
+	spin_lock_irq(&port->port_lock);
+	gser = port->port_usb;
+	if (gser && gser->send_break)
+		status = gser->send_break(gser, duration);
+	spin_unlock_irq(&port->port_lock);
+
+	return status;
+}
+
+static const struct tty_operations gs_tty_ops = {
+	.open =			gs_open,
+	.close =		gs_close,
+	.write =		gs_write,
+	.put_char =		gs_put_char,
+	.flush_chars =		gs_flush_chars,
+	.write_room =		gs_write_room,
+	.chars_in_buffer =	gs_chars_in_buffer,
+	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break_ctl,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct tty_driver *gs_tty_driver;
+
+static int
+gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
+{
+	struct gs_port	*port;
+
+	port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
+	if (port == NULL)
+		return -ENOMEM;
+
+	tty_port_init(&port->port);
+	spin_lock_init(&port->port_lock);
+	init_waitqueue_head(&port->drain_wait);
+
+	tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
+
+	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
+	INIT_LIST_HEAD(&port->write_pool);
+
+	port->port_num = port_num;
+	port->port_line_coding = *coding;
+
+	ports[port_num].port = port;
+
+	return 0;
+}
+
+/**
+ * gserial_setup - initialize TTY driver for one or more ports
+ * @g: gadget to associate with these ports
+ * @count: how many ports to support
+ * Context: may sleep
+ *
+ * The TTY stack needs to know in advance how many devices it should
+ * plan to manage.  Use this call to set up the ports you will be
+ * exporting through USB.  Later, connect them to functions based
+ * on what configuration is activated by the USB host; and disconnect
+ * them as appropriate.
+ *
+ * An example would be a two-configuration device in which both
+ * configurations expose port 0, but through different functions.
+ * One configuration could even expose port 1 while the other
+ * one doesn't.
+ *
+ * Returns negative errno or zero.
+ */
+int gserial_setup(struct usb_gadget *g, unsigned count)
+{
+	unsigned			i;
+	struct usb_cdc_line_coding	coding;
+	int				status;
+
+	if (count == 0 || count > N_PORTS)
+		return -EINVAL;
+
+	gs_tty_driver = alloc_tty_driver(count);
+	if (!gs_tty_driver)
+		return -ENOMEM;
+
+	gs_tty_driver->driver_name = "g_serial";
+	gs_tty_driver->name = PREFIX;
+	/* uses dynamically assigned dev_t values */
+
+	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	gs_tty_driver->init_termios = tty_std_termios;
+
+	/* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
+	 * MS-Windows.  Otherwise, most of these flags shouldn't affect
+	 * anything unless we were to actually hook up to a serial line.
+	 */
+	gs_tty_driver->init_termios.c_cflag =
+			B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	gs_tty_driver->init_termios.c_ispeed = 9600;
+	gs_tty_driver->init_termios.c_ospeed = 9600;
+
+	coding.dwDTERate = cpu_to_le32(9600);
+	coding.bCharFormat = 8;
+	coding.bParityType = USB_CDC_NO_PARITY;
+	coding.bDataBits = USB_CDC_1_STOP_BITS;
+
+	tty_set_operations(gs_tty_driver, &gs_tty_ops);
+
+	/* make devices be openable */
+	for (i = 0; i < count; i++) {
+		mutex_init(&ports[i].lock);
+		status = gs_port_alloc(i, &coding);
+		if (status) {
+			count = i;
+			goto fail;
+		}
+	}
+	n_ports = count;
+
+	/* export the driver ... */
+	status = tty_register_driver(gs_tty_driver);
+	if (status) {
+		pr_err("%s: cannot register, err %d\n",
+				__func__, status);
+		goto fail;
+	}
+
+	/* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
+	for (i = 0; i < count; i++) {
+		struct device	*tty_dev;
+
+		tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+		if (IS_ERR(tty_dev))
+			pr_warning("%s: no classdev for port %d, err %ld\n",
+				__func__, i, PTR_ERR(tty_dev));
+	}
+
+	pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
+			count, (count == 1) ? "" : "s");
+
+	return status;
+fail:
+	while (count--)
+		kfree(ports[count].port);
+	put_tty_driver(gs_tty_driver);
+	gs_tty_driver = NULL;
+	return status;
+}
+
+static int gs_closed(struct gs_port *port)
+{
+	int cond;
+
+	spin_lock_irq(&port->port_lock);
+	cond = (port->port.count == 0) && !port->openclose;
+	spin_unlock_irq(&port->port_lock);
+	return cond;
+}
+
+/**
+ * gserial_cleanup - remove TTY-over-USB driver and devices
+ * Context: may sleep
+ *
+ * This is called to free all resources allocated by @gserial_setup().
+ * Accordingly, it may need to wait until some open /dev/ files have
+ * closed.
+ *
+ * The caller must have issued @gserial_disconnect() for any ports
+ * that had previously been connected, so that there is never any
+ * I/O pending when it's called.
+ */
+void gserial_cleanup(void)
+{
+	unsigned	i;
+	struct gs_port	*port;
+
+	if (!gs_tty_driver)
+		return;
+
+	/* start sysfs and /dev/ttyGS* node removal */
+	for (i = 0; i < n_ports; i++)
+		tty_unregister_device(gs_tty_driver, i);
+
+	for (i = 0; i < n_ports; i++) {
+		/* prevent new opens */
+		mutex_lock(&ports[i].lock);
+		port = ports[i].port;
+		ports[i].port = NULL;
+		mutex_unlock(&ports[i].lock);
+
+		tasklet_kill(&port->push);
+
+		/* wait for old opens to finish */
+		wait_event(port->port.close_wait, gs_closed(port));
+
+		WARN_ON(port->port_usb != NULL);
+
+		kfree(port);
+	}
+	n_ports = 0;
+
+	tty_unregister_driver(gs_tty_driver);
+	put_tty_driver(gs_tty_driver);
+	gs_tty_driver = NULL;
+
+	pr_debug("%s: cleaned up ttyGS* support\n", __func__);
+}
+
+/**
+ * gserial_connect - notify TTY I/O glue that USB link is active
+ * @gser: the function, set up with endpoints and descriptors
+ * @port_num: which port is active
+ * Context: any (usually from irq)
+ *
+ * This is called activate endpoints and let the TTY layer know that
+ * the connection is active ... not unlike "carrier detect".  It won't
+ * necessarily start I/O queues; unless the TTY is held open by any
+ * task, there would be no point.  However, the endpoints will be
+ * activated so the USB host can perform I/O, subject to basic USB
+ * hardware flow control.
+ *
+ * Caller needs to have set up the endpoints and USB function in @dev
+ * before calling this, as well as the appropriate (speed-specific)
+ * endpoint descriptors, and also have set up the TTY driver by calling
+ * @gserial_setup().
+ *
+ * Returns negative errno or zero.
+ * On success, ep->driver_data will be overwritten.
+ */
+int gserial_connect(struct gserial *gser, u8 port_num)
+{
+	struct gs_port	*port;
+	unsigned long	flags;
+	int		status;
+
+	if (!gs_tty_driver || port_num >= n_ports)
+		return -ENXIO;
+
+	/* we "know" gserial_cleanup() hasn't been called */
+	port = ports[port_num].port;
+
+	/* activate the endpoints */
+	status = usb_ep_enable(gser->in);
+	if (status < 0)
+		return status;
+	gser->in->driver_data = port;
+
+	status = usb_ep_enable(gser->out);
+	if (status < 0)
+		goto fail_out;
+	gser->out->driver_data = port;
+
+	/* then tell the tty glue that I/O can work */
+	spin_lock_irqsave(&port->port_lock, flags);
+	gser->ioport = port;
+	port->port_usb = gser;
+
+	/* REVISIT unclear how best to handle this state...
+	 * we don't really couple it with the Linux TTY.
+	 */
+	gser->port_line_coding = port->port_line_coding;
+
+	/* REVISIT if waiting on "carrier detect", signal. */
+
+	/* if it's already open, start I/O ... and notify the serial
+	 * protocol about open/close status (connect/disconnect).
+	 */
+	if (port->port.count) {
+		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
+		gs_start_io(port);
+		if (gser->connect)
+			gser->connect(gser);
+	} else {
+		if (gser->disconnect)
+			gser->disconnect(gser);
+	}
+
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	return status;
+
+fail_out:
+	usb_ep_disable(gser->in);
+	gser->in->driver_data = NULL;
+	return status;
+}
+
+/**
+ * gserial_disconnect - notify TTY I/O glue that USB link is inactive
+ * @gser: the function, on which gserial_connect() was called
+ * Context: any (usually from irq)
+ *
+ * This is called to deactivate endpoints and let the TTY layer know
+ * that the connection went inactive ... not unlike "hangup".
+ *
+ * On return, the state is as if gserial_connect() had never been called;
+ * there is no active USB I/O on these endpoints.
+ */
+void gserial_disconnect(struct gserial *gser)
+{
+	struct gs_port	*port = gser->ioport;
+	unsigned long	flags;
+
+	if (!port)
+		return;
+
+	/* tell the TTY glue not to do I/O here any more */
+	spin_lock_irqsave(&port->port_lock, flags);
+
+	/* REVISIT as above: how best to track this? */
+	port->port_line_coding = gser->port_line_coding;
+
+	port->port_usb = NULL;
+	gser->ioport = NULL;
+	if (port->port.count > 0 || port->openclose) {
+		wake_up_interruptible(&port->drain_wait);
+		if (port->port.tty)
+			tty_hangup(port->port.tty);
+	}
+	spin_unlock_irqrestore(&port->port_lock, flags);
+
+	/* disable endpoints, aborting down any active I/O */
+	usb_ep_disable(gser->out);
+	gser->out->driver_data = NULL;
+
+	usb_ep_disable(gser->in);
+	gser->in->driver_data = NULL;
+
+	/* finally, free any unused/unusable I/O buffers */
+	spin_lock_irqsave(&port->port_lock, flags);
+	if (port->port.count == 0 && !port->openclose)
+		gs_buf_free(&port->port_write_buf);
+	gs_free_requests(gser->out, &port->read_pool, NULL);
+	gs_free_requests(gser->out, &port->read_queue, NULL);
+	gs_free_requests(gser->in, &port->write_pool, NULL);
+
+	port->read_allocated = port->read_started =
+		port->write_allocated = port->write_started = 0;
+
+	spin_unlock_irqrestore(&port->port_lock, flags);
+}
diff --git a/drivers/staging/ccg/u_serial.h b/drivers/staging/ccg/u_serial.h
new file mode 100644
index 000000000000..9b0fe6450fbf
--- /dev/null
+++ b/drivers/staging/ccg/u_serial.h
@@ -0,0 +1,65 @@
+/*
+ * u_serial.h - interface to USB gadget "serial port"/TTY utilities
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+#ifndef __U_SERIAL_H
+#define __U_SERIAL_H
+
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+/*
+ * One non-multiplexed "serial" I/O port ... there can be several of these
+ * on any given USB peripheral device, if it provides enough endpoints.
+ *
+ * The "u_serial" utility component exists to do one thing:  manage TTY
+ * style I/O using the USB peripheral endpoints listed here, including
+ * hookups to sysfs and /dev for each logical "tty" device.
+ *
+ * REVISIT at least ACM could support tiocmget() if needed.
+ *
+ * REVISIT someday, allow multiplexing several TTYs over these endpoints.
+ */
+struct gserial {
+	struct usb_function		func;
+
+	/* port is managed by gserial_{connect,disconnect} */
+	struct gs_port			*ioport;
+
+	struct usb_ep			*in;
+	struct usb_ep			*out;
+
+	/* REVISIT avoid this CDC-ACM support harder ... */
+	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
+
+	/* notification callbacks */
+	void (*connect)(struct gserial *p);
+	void (*disconnect)(struct gserial *p);
+	int (*send_break)(struct gserial *p, int duration);
+};
+
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
+/* port setup/teardown is handled by gadget driver */
+int gserial_setup(struct usb_gadget *g, unsigned n_ports);
+void gserial_cleanup(void);
+
+/* connect/disconnect is handled by individual functions */
+int gserial_connect(struct gserial *, u8 port_num);
+void gserial_disconnect(struct gserial *);
+
+/* functions are bound to configurations by a config or gadget driver */
+int acm_bind_config(struct usb_configuration *c, u8 port_num);
+int gser_bind_config(struct usb_configuration *c, u8 port_num);
+int obex_bind_config(struct usb_configuration *c, u8 port_num);
+
+#endif /* __U_SERIAL_H */
diff --git a/drivers/staging/ccg/usbstring.c b/drivers/staging/ccg/usbstring.c
new file mode 100644
index 000000000000..4d25b9009edf
--- /dev/null
+++ b/drivers/staging/ccg/usbstring.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/nls.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+
+/**
+ * usb_gadget_get_string - fill out a string descriptor 
+ * @table: of c strings encoded using UTF-8
+ * @id: string id, from low byte of wValue in get string descriptor
+ * @buf: at least 256 bytes, must be 16-bit aligned
+ *
+ * Finds the UTF-8 string matching the ID, and converts it into a
+ * string descriptor in utf16-le.
+ * Returns length of descriptor (always even) or negative errno
+ *
+ * If your driver needs stings in multiple languages, you'll probably
+ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
+ * using this routine after choosing which set of UTF-8 strings to use.
+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
+ * characters (which are also widely used in C strings).
+ */
+int
+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
+{
+	struct usb_string	*s;
+	int			len;
+
+	/* descriptor 0 has the language id */
+	if (id == 0) {
+		buf [0] = 4;
+		buf [1] = USB_DT_STRING;
+		buf [2] = (u8) table->language;
+		buf [3] = (u8) (table->language >> 8);
+		return 4;
+	}
+	for (s = table->strings; s && s->s; s++)
+		if (s->id == id)
+			break;
+
+	/* unrecognized: stall. */
+	if (!s || !s->s)
+		return -EINVAL;
+
+	/* string descriptors have length, tag, then UTF16-LE text */
+	len = min ((size_t) 126, strlen (s->s));
+	len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
+			(wchar_t *) &buf[2], 126);
+	if (len < 0)
+		return -EINVAL;
+	buf [0] = (len + 1) * 2;
+	buf [1] = USB_DT_STRING;
+	return buf [0];
+}
+
-- 
cgit v1.2.3


From ffe0b335062505a98d7296dae2c2a197713f87e0 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Fri, 7 Sep 2012 09:53:17 +0200
Subject: usb: gadget: remove global variable composite in composite.c

This patch removes the global variable composite in composite.c.
The private data which was saved there is now passed via an additional
argument to the bind() function in struct usb_gadget_driver.

Only the "old-style" UDC drivers have to be touched here, new style are
doing it right because this change is made in udc-core.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/staging/ccg/composite.c   |  3 ++-
 drivers/usb/gadget/amd5536udc.c   |  6 ++---
 drivers/usb/gadget/composite.c    | 52 ++++++++++++++++++++++-----------------
 drivers/usb/gadget/dbgp.c         |  3 ++-
 drivers/usb/gadget/file_storage.c |  3 ++-
 drivers/usb/gadget/fsl_udc_core.c |  6 ++---
 drivers/usb/gadget/fusb300_udc.c  |  4 +--
 drivers/usb/gadget/goku_udc.c     |  6 ++---
 drivers/usb/gadget/inode.c        |  7 +++---
 drivers/usb/gadget/m66592-udc.c   |  4 +--
 drivers/usb/gadget/mv_udc_core.c  |  6 ++---
 drivers/usb/gadget/omap_udc.c     |  6 ++---
 drivers/usb/gadget/pch_udc.c      |  6 ++---
 drivers/usb/gadget/pxa25x_udc.c   |  6 ++---
 drivers/usb/gadget/pxa27x_udc.c   |  6 ++---
 drivers/usb/gadget/s3c2410_udc.c  |  6 ++---
 drivers/usb/gadget/udc-core.c     |  4 +--
 include/linux/usb/composite.h     |  1 +
 include/linux/usb/gadget.h        |  6 +++--
 19 files changed, 78 insertions(+), 63 deletions(-)

(limited to 'drivers')

diff --git a/drivers/staging/ccg/composite.c b/drivers/staging/ccg/composite.c
index 2a345f28b9ae..228b4574f228 100644
--- a/drivers/staging/ccg/composite.c
+++ b/drivers/staging/ccg/composite.c
@@ -1422,7 +1422,8 @@ static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
 	return *desc;
 }
 
-static int composite_bind(struct usb_gadget *gadget)
+static int composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	struct usb_composite_dev	*cdev;
 	int				status = -ENOMEM;
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 187d21181cd5..fc0ec5e0d58e 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1401,7 +1401,7 @@ static int udc_wakeup(struct usb_gadget *gadget)
 }
 
 static int amd5536_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int amd5536_stop(struct usb_gadget_driver *driver);
 /* gadget operations */
 static const struct usb_gadget_ops udc_ops = {
@@ -1914,7 +1914,7 @@ static int setup_ep0(struct udc *dev)
 
 /* Called by gadget driver to register itself */
 static int amd5536_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct udc		*dev = udc;
 	int			retval;
@@ -1932,7 +1932,7 @@ static int amd5536_start(struct usb_gadget_driver *driver,
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
 
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 
 	/* Some gadget drivers use both ep0 directions.
 	 * NOTE: to gadget driver, ep0 is just one endpoint...
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 2a345f28b9ae..0b6ee2012af1 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -31,8 +31,6 @@
 /* big enough to hold our biggest descriptor */
 #define USB_BUFSIZ	1024
 
-static struct usb_composite_driver *composite;
-
 /* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
@@ -889,6 +887,7 @@ static int lookup_string(
 static int get_string(struct usb_composite_dev *cdev,
 		void *buf, u16 language, int id)
 {
+	struct usb_composite_driver	*composite = cdev->driver;
 	struct usb_configuration	*c;
 	struct usb_function		*f;
 	int				len;
@@ -1359,8 +1358,8 @@ static void composite_disconnect(struct usb_gadget *gadget)
 	spin_lock_irqsave(&cdev->lock, flags);
 	if (cdev->config)
 		reset_config(cdev);
-	if (composite->disconnect)
-		composite->disconnect(cdev);
+	if (cdev->driver->disconnect)
+		cdev->driver->disconnect(cdev);
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
 
@@ -1396,8 +1395,8 @@ composite_unbind(struct usb_gadget *gadget)
 				struct usb_configuration, list);
 		remove_config(cdev, c);
 	}
-	if (composite->unbind)
-		composite->unbind(cdev);
+	if (cdev->driver->unbind)
+		cdev->driver->unbind(cdev);
 
 	if (cdev->req) {
 		kfree(cdev->req->buf);
@@ -1406,7 +1405,6 @@ composite_unbind(struct usb_gadget *gadget)
 	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
-	composite = NULL;
 }
 
 static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
@@ -1422,9 +1420,16 @@ static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
 	return *desc;
 }
 
-static int composite_bind(struct usb_gadget *gadget)
+static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
+{
+	return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
+
+static int composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *gdriver)
 {
 	struct usb_composite_dev	*cdev;
+	struct usb_composite_driver	*composite = to_cdriver(gdriver);
 	int				status = -ENOMEM;
 
 	cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
@@ -1546,8 +1551,8 @@ composite_suspend(struct usb_gadget *gadget)
 				f->suspend(f);
 		}
 	}
-	if (composite->suspend)
-		composite->suspend(cdev);
+	if (cdev->driver->suspend)
+		cdev->driver->suspend(cdev);
 
 	cdev->suspended = 1;
 
@@ -1565,8 +1570,8 @@ composite_resume(struct usb_gadget *gadget)
 	 * suspend/resume callbacks?
 	 */
 	DBG(cdev, "resume\n");
-	if (composite->resume)
-		composite->resume(cdev);
+	if (cdev->driver->resume)
+		cdev->driver->resume(cdev);
 	if (cdev->config) {
 		list_for_each_entry(f, &cdev->config->functions, list) {
 			if (f->resume)
@@ -1584,7 +1589,7 @@ composite_resume(struct usb_gadget *gadget)
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_gadget_driver composite_driver = {
+static const struct usb_gadget_driver composite_driver_template = {
 	.bind		= composite_bind,
 	.unbind		= composite_unbind,
 
@@ -1620,19 +1625,24 @@ static struct usb_gadget_driver composite_driver = {
  */
 int usb_composite_probe(struct usb_composite_driver *driver)
 {
-	if (!driver || !driver->dev || composite || !driver->bind)
+	struct usb_gadget_driver *gadget_driver;
+
+	if (!driver || !driver->dev || !driver->bind)
 		return -EINVAL;
 
 	if (!driver->name)
 		driver->name = "composite";
 	if (!driver->iProduct)
 		driver->iProduct = driver->name;
-	composite_driver.function =  (char *) driver->name;
-	composite_driver.driver.name = driver->name;
-	composite_driver.max_speed = driver->max_speed;
-	composite = driver;
 
-	return usb_gadget_probe_driver(&composite_driver);
+	driver->gadget_driver = composite_driver_template;
+	gadget_driver = &driver->gadget_driver;
+
+	gadget_driver->function =  (char *) driver->name;
+	gadget_driver->driver.name = driver->name;
+	gadget_driver->max_speed = driver->max_speed;
+
+	return usb_gadget_probe_driver(gadget_driver);
 }
 
 /**
@@ -1644,9 +1654,7 @@ int usb_composite_probe(struct usb_composite_driver *driver)
  */
 void usb_composite_unregister(struct usb_composite_driver *driver)
 {
-	if (composite != driver)
-		return;
-	usb_gadget_unregister_driver(&composite_driver);
+	usb_gadget_unregister_driver(&driver->gadget_driver);
 }
 
 /**
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index df9a0104bdf2..cc1746597aab 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -292,7 +292,8 @@ fail_1:
 	return -ENODEV;
 }
 
-static int __init dbgp_bind(struct usb_gadget *gadget)
+static int __init dbgp_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	int err, stp;
 
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index ce186fa7e7b2..cdacae706b70 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3331,7 +3331,8 @@ static int __init check_parameters(struct fsg_dev *fsg)
 }
 
 
-static int __init fsg_bind(struct usb_gadget *gadget)
+static int __init fsg_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	struct fsg_dev		*fsg = the_fsg;
 	int			rc;
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 3def828f85e7..6ae70cba0c4a 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1255,7 +1255,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int fsl_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int fsl_stop(struct usb_gadget_driver *driver);
 /* defined in gadget.h */
 static struct usb_gadget_ops fsl_gadget_ops = {
@@ -1951,7 +1951,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
  * Called by initialization code of gadget drivers
 *----------------------------------------------------------------*/
 static int fsl_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	int retval = -ENODEV;
 	unsigned long flags = 0;
@@ -1976,7 +1976,7 @@ static int fsl_start(struct usb_gadget_driver *driver,
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
 	/* bind udc driver to gadget driver */
-	retval = bind(&udc_controller->gadget);
+	retval = bind(&udc_controller->gadget, driver);
 	if (retval) {
 		VDBG("bind to %s --> %d", driver->driver.name, retval);
 		udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index cdd94540e1cd..72cd5e6719db 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1311,7 +1311,7 @@ static void init_controller(struct fusb300 *fusb300)
 static struct fusb300 *the_controller;
 
 static int fusb300_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct fusb300 *fusb300 = the_controller;
 	int retval;
@@ -1339,7 +1339,7 @@ static int fusb300_udc_start(struct usb_gadget_driver *driver,
 		goto error;
 	}
 
-	retval = bind(&fusb300->gadget);
+	retval = bind(&fusb300->gadget, driver);
 	if (retval) {
 		pr_err("bind to driver error (%d)\n", retval);
 		device_del(&fusb300->gadget.dev);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 9fd7886cfa9a..51037cb78604 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -994,7 +994,7 @@ static int goku_get_frame(struct usb_gadget *_gadget)
 }
 
 static int goku_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int goku_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops goku_ops = {
@@ -1348,7 +1348,7 @@ static struct goku_udc	*the_controller;
  * the driver might get unbound.
  */
 static int goku_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct goku_udc	*dev = the_controller;
 	int			retval;
@@ -1368,7 +1368,7 @@ static int goku_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 	if (retval) {
 		DBG(dev, "bind to driver %s --> error %d\n",
 				driver->driver.name, retval);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 2521804ba4ee..4bb6d53f2de3 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1679,8 +1679,8 @@ gadgetfs_unbind (struct usb_gadget *gadget)
 
 static struct dev_data		*the_device;
 
-static int
-gadgetfs_bind (struct usb_gadget *gadget)
+static int gadgetfs_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	struct dev_data		*dev = the_device;
 
@@ -1773,7 +1773,8 @@ static struct usb_gadget_driver gadgetfs_driver = {
 
 static void gadgetfs_nop(struct usb_gadget *arg) { }
 
-static int gadgetfs_probe (struct usb_gadget *gadget)
+static int gadgetfs_probe(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	CHIP = gadget->name;
 	return -EISNAM;
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index cf6bd626f3fe..b6401f1b56ce 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1466,7 +1466,7 @@ static struct usb_ep_ops m66592_ep_ops = {
 static struct m66592 *the_controller;
 
 static int m66592_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct m66592 *m66592 = the_controller;
 	int retval;
@@ -1492,7 +1492,7 @@ static int m66592_start(struct usb_gadget_driver *driver,
 		goto error;
 	}
 
-	retval = bind(&m66592->gadget);
+	retval = bind(&m66592->gadget, driver);
 	if (retval) {
 		pr_err("bind to driver error (%d)\n", retval);
 		device_del(&m66592->gadget.dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ad91de4d60d8..ea45224f78c8 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1269,7 +1269,7 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int mv_udc_stop(struct usb_gadget_driver *driver);
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops mv_ops = {
@@ -1374,7 +1374,7 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct mv_udc *udc = the_controller;
 	int retval = 0;
@@ -1399,7 +1399,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	retval = bind(&udc->gadget);
+	retval = bind(&udc->gadget, driver);
 	if (retval) {
 		dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
 				driver->driver.name, retval);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index f9132ada53b5..2a4749c3eb3f 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1308,7 +1308,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int omap_udc_stop(struct usb_gadget_driver *driver);
 
 static struct usb_gadget_ops omap_gadget_ops = {
@@ -2040,7 +2040,7 @@ static inline int machine_without_vbus_sense(void)
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	int		status = -ENODEV;
 	struct omap_ep	*ep;
@@ -2082,7 +2082,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	if (udc->dc_clk != NULL)
 		omap_udc_enable_clock(1);
 
-	status = bind(&udc->gadget);
+	status = bind(&udc->gadget, driver);
 	if (status) {
 		DBG("bind to %s --> %d\n", driver->driver.name, status);
 		udc->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f4fb71c9ae08..6490c0040e3a 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1236,7 +1236,7 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
 }
 
 static int pch_udc_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *));
+	int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pch_udc_stop(struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops pch_udc_ops = {
 	.get_frame = pch_udc_pcd_get_frame,
@@ -2982,7 +2982,7 @@ static int init_dma_pools(struct pch_udc_dev *dev)
 }
 
 static int pch_udc_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *))
+	int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pch_udc_dev	*dev = pch_udc;
 	int			retval;
@@ -3006,7 +3006,7 @@ static int pch_udc_start(struct usb_gadget_driver *driver,
 	dev->gadget.dev.driver = &driver->driver;
 
 	/* Invoke the bind routine of the gadget driver */
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 
 	if (retval) {
 		dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index c246c08a242d..8efbf08c3561 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -999,7 +999,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 }
 
 static int pxa25x_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pxa25x_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops pxa25x_udc_ops = {
@@ -1257,7 +1257,7 @@ static void udc_enable (struct pxa25x_udc *dev)
  * the driver might get unbound.
  */
 static int pxa25x_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pxa25x_udc	*dev = the_controller;
 	int			retval;
@@ -1285,7 +1285,7 @@ fail:
 		dev->gadget.dev.driver = NULL;
 		return retval;
 	}
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 	if (retval) {
 		DMSG("bind to driver %s --> error %d\n",
 				driver->driver.name, retval);
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 644b4305cb99..979ddaddb0f8 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1672,7 +1672,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 }
 
 static int pxa27x_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pxa27x_udc_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops pxa_udc_ops = {
@@ -1803,7 +1803,7 @@ static void udc_enable(struct pxa_udc *udc)
  * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
  */
 static int pxa27x_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pxa_udc *udc = the_controller;
 	int retval;
@@ -1826,7 +1826,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 		dev_err(udc->dev, "device_add error %d\n", retval);
 		goto add_fail;
 	}
-	retval = bind(&udc->gadget);
+	retval = bind(&udc->gadget, driver);
 	if (retval) {
 		dev_err(udc->dev, "bind to driver %s --> error %d\n",
 			driver->driver.name, retval);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index b627c9b51fda..c33e942d119c 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1539,7 +1539,7 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
 }
 
 static int s3c2410_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int s3c2410_udc_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops s3c2410_ops = {
@@ -1665,7 +1665,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
 }
 
 static int s3c2410_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct s3c2410_udc *udc = the_controller;
 	int		retval;
@@ -1705,7 +1705,7 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 	dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n",
 		driver->driver.name);
 
-	retval = bind(&udc->gadget);
+	retval = bind(&udc->gadget, driver);
 	if (retval) {
 		device_del(&udc->gadget.dev);
 		goto register_error;
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 85e1e2fdd403..f3cd9690b101 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -118,7 +118,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
  */
 static inline int usb_gadget_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	return gadget->ops->start(driver, bind);
 }
@@ -338,7 +338,7 @@ found:
 	udc->dev.driver = &driver->driver;
 
 	if (udc_is_newstyle(udc)) {
-		ret = driver->bind(udc->gadget);
+		ret = driver->bind(udc->gadget, driver);
 		if (ret)
 			goto err1;
 		ret = usb_gadget_udc_start(udc->gadget, driver);
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 19a5adf18bf4..43d6b9ca51b7 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -303,6 +303,7 @@ struct usb_composite_driver {
 	/* global suspend hooks */
 	void			(*suspend)(struct usb_composite_dev *);
 	void			(*resume)(struct usb_composite_dev *);
+	struct usb_gadget_driver		gadget_driver;
 };
 
 extern int usb_composite_probe(struct usb_composite_driver *driver);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 9eb4e712168f..822c1b88f95a 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -474,7 +474,8 @@ struct usb_gadget_ops {
 
 	/* Those two are deprecated */
 	int	(*start)(struct usb_gadget_driver *,
-			int (*bind)(struct usb_gadget *));
+			int (*bind)(struct usb_gadget *,
+				struct usb_gadget_driver *driver));
 	int	(*stop)(struct usb_gadget_driver *);
 };
 
@@ -821,7 +822,8 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
 struct usb_gadget_driver {
 	char			*function;
 	enum usb_device_speed	max_speed;
-	int			(*bind)(struct usb_gadget *gadget);
+	int			(*bind)(struct usb_gadget *gadget,
+					struct usb_gadget_driver *driver);
 	void			(*unbind)(struct usb_gadget *);
 	int			(*setup)(struct usb_gadget *,
 					const struct usb_ctrlrequest *);
-- 
cgit v1.2.3


From 4001a7a163d8e49eb9baf294527ad2ed50202e22 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:08 +0200
Subject: usb: gadget: pxa25x: make it compile with debug again

|drivers/usb/gadget/pxa25x_udc.h: In function 'dump_state':
|drivers/usb/gadget/pxa25x_udc.h:228:20: error: invalid type argument of '->' (have 'struct usb_ep')

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/pxa25x_udc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 861f4df6ea22..2eca1e71fecd 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -225,7 +225,7 @@ dump_state(struct pxa25x_udc *dev)
 		dev->stats.read.bytes, dev->stats.read.ops);
 
 	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
-		if (dev->ep [i].desc == NULL)
+		if (dev->ep[i].ep.desc == NULL)
 			continue;
 		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
 	}
-- 
cgit v1.2.3


From a84d9e5361bcfbff1c84481bd9c04fc58a56d83b Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:09 +0200
Subject: usb: gadget: start with libcomposite

This patch aims to be simple. It removes #include usbstribgs.c line from each
gadget and creates libcomposite.ko which has only one member, that is
usbstribgs.c.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Kconfig          | 25 +++++++++++++++++++++++++
 drivers/usb/gadget/Makefile         |  2 ++
 drivers/usb/gadget/acm_ms.c         |  1 -
 drivers/usb/gadget/audio.c          |  1 -
 drivers/usb/gadget/cdc2.c           |  1 -
 drivers/usb/gadget/ether.c          |  1 -
 drivers/usb/gadget/file_storage.c   |  1 -
 drivers/usb/gadget/g_ffs.c          |  1 -
 drivers/usb/gadget/gmidi.c          |  1 -
 drivers/usb/gadget/hid.c            |  1 -
 drivers/usb/gadget/mass_storage.c   |  1 -
 drivers/usb/gadget/multi.c          |  1 -
 drivers/usb/gadget/ncm.c            |  1 -
 drivers/usb/gadget/nokia.c          |  1 -
 drivers/usb/gadget/printer.c        |  1 -
 drivers/usb/gadget/serial.c         |  1 -
 drivers/usb/gadget/tcm_usb_gadget.c |  1 -
 drivers/usb/gadget/usbstring.c      |  4 +++-
 drivers/usb/gadget/webcam.c         |  1 -
 drivers/usb/gadget/zero.c           |  1 -
 20 files changed, 30 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 75b76d5a0fe9..a53be32c22cf 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -494,6 +494,12 @@ endmenu
 #
 # USB Gadget Drivers
 #
+
+# composite based drivers
+config USB_LIBCOMPOSITE
+	tristate
+	depends on USB_GADGET
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -517,6 +523,7 @@ choice
 
 config USB_ZERO
 	tristate "Gadget Zero (DEVELOPMENT)"
+	select USB_LIBCOMPOSITE
 	help
 	  Gadget Zero is a two-configuration device.  It either sinks and
 	  sources bulk data; or it loops back a configurable number of
@@ -552,6 +559,7 @@ config USB_ZERO_HNPTEST
 config USB_AUDIO
 	tristate "Audio Gadget (EXPERIMENTAL)"
 	depends on SND
+	select USB_LIBCOMPOSITE
 	select SND_PCM
 	help
 	  This Gadget Audio driver is compatible with USB Audio Class
@@ -580,6 +588,7 @@ config GADGET_UAC1
 config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	select CRC32
 	help
 	  This driver implements Ethernet style communication, in one of
@@ -615,6 +624,7 @@ config USB_ETH
 config USB_ETH_RNDIS
 	bool "RNDIS support"
 	depends on USB_ETH
+	select USB_LIBCOMPOSITE
 	default y
 	help
 	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
@@ -633,6 +643,7 @@ config USB_ETH_RNDIS
 config USB_ETH_EEM
        bool "Ethernet Emulation Model (EEM) support"
        depends on USB_ETH
+	select USB_LIBCOMPOSITE
        default n
        help
          CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
@@ -649,6 +660,7 @@ config USB_ETH_EEM
 config USB_G_NCM
 	tristate "Network Control Model (NCM) support"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	select CRC32
 	help
 	  This driver implements USB CDC NCM subclass standard. NCM is
@@ -678,6 +690,7 @@ config USB_GADGETFS
 config USB_FUNCTIONFS
 	tristate "Function Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select USB_LIBCOMPOSITE
 	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
 	help
 	  The Function Filesystem (FunctionFS) lets one create USB
@@ -741,6 +754,7 @@ config USB_FILE_STORAGE_TEST
 config USB_MASS_STORAGE
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
+	select USB_LIBCOMPOSITE
 	help
 	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
 	  As its storage repository it can use a regular file or a block
@@ -756,6 +770,7 @@ config USB_MASS_STORAGE
 config USB_GADGET_TARGET
 	tristate "USB Gadget Target Fabric Module"
 	depends on TARGET_CORE
+	select USB_LIBCOMPOSITE
 	help
 	  This fabric is an USB gadget. Two USB protocols are supported that is
 	  BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
@@ -765,6 +780,7 @@ config USB_GADGET_TARGET
 
 config USB_G_SERIAL
 	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+	select USB_LIBCOMPOSITE
 	help
 	  The Serial Gadget talks to the Linux-USB generic serial driver.
 	  This driver supports a CDC-ACM module option, which can be used
@@ -785,6 +801,7 @@ config USB_G_SERIAL
 config USB_MIDI_GADGET
 	tristate "MIDI Gadget (EXPERIMENTAL)"
 	depends on SND && EXPERIMENTAL
+	select USB_LIBCOMPOSITE
 	select SND_RAWMIDI
 	help
 	  The MIDI Gadget acts as a USB Audio device, with one MIDI
@@ -798,6 +815,7 @@ config USB_MIDI_GADGET
 
 config USB_G_PRINTER
 	tristate "Printer Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  The Printer Gadget channels data between the USB host and a
 	  userspace program driving the print engine. The user space
@@ -814,6 +832,7 @@ config USB_G_PRINTER
 config USB_CDC_COMPOSITE
 	tristate "CDC Composite Device (Ethernet and ACM)"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	help
 	  This driver provides two functions in one configuration:
 	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
@@ -828,6 +847,7 @@ config USB_CDC_COMPOSITE
 config USB_G_NOKIA
 	tristate "Nokia composite gadget"
 	depends on PHONET
+	select USB_LIBCOMPOSITE
 	help
 	  The Nokia composite gadget provides support for acm, obex
 	  and phonet in only one composite gadget driver.
@@ -838,6 +858,7 @@ config USB_G_NOKIA
 config USB_G_ACM_MS
 	tristate "CDC Composite Device (ACM and mass storage)"
 	depends on BLOCK
+	select USB_LIBCOMPOSITE
 	help
 	  This driver provides two functions in one configuration:
 	  a mass storage, and a CDC ACM (serial port) link.
@@ -849,6 +870,7 @@ config USB_G_MULTI
 	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
 	depends on BLOCK && NET
 	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
+	select USB_LIBCOMPOSITE
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS
 	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -889,6 +911,7 @@ config USB_G_MULTI_CDC
 
 config USB_G_HID
 	tristate "HID Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  The HID gadget driver provides generic emulation of USB
 	  Human Interface Devices (HID).
@@ -899,8 +922,10 @@ config USB_G_HID
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_hid".
 
+# Standalone / single function gadgets
 config USB_G_DBGP
 	tristate "EHCI Debug Device Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  This gadget emulates an EHCI Debug device. This is useful when you want
 	  to interact with an EHCI Debug Port.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index d84f92325a74..eadbc86333f6 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -4,6 +4,8 @@
 ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
+obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
+libcomposite-y			:= usbstring.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 65a2f3cbcde3..9820960dfc5c 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -42,7 +42,6 @@
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 #include "u_serial.c"
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index dd339bc5b40c..76e54b44c27a 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -27,7 +27,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index b7d984b54ca9..74a9c7f65ec8 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -44,7 +44,6 @@
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 #include "u_serial.c"
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 4580ec09cc53..e16094e5d1d2 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -103,7 +103,6 @@ static inline bool has_rndis(void)
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cdacae706b70..8d0166b76d40 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -265,7 +265,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index da9809f55cb5..407b5ccc64a4 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -24,7 +24,6 @@
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 1e3cd378a2d7..135b3900eaa3 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -38,7 +38,6 @@
 #include "gadget_chips.h"
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 #include "f_midi.c"
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 8502e56d73bc..effda2e0742b 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -35,7 +35,6 @@
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 480edbc368e5..a7f32c312a6b 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -49,7 +49,6 @@
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 #include "f_mass_storage.c"
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 13db7ccb9571..71c1fabdbb78 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -44,7 +44,6 @@ MODULE_LICENSE("GPL");
  */
 
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 9a20057896cd..d7e6b1ee8664 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -37,7 +37,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index a5b5e7162fef..474c77ca58c0 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -39,7 +39,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 33c0c07493e8..c55e7d99b810 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -52,7 +52,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index ea3f8e9344ae..88baa9e3f827 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -38,7 +38,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 35ca09af9b4a..327af6883715 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -25,7 +25,6 @@
 #include <target/configfs_macros.h>
 #include <asm/unaligned.h>
 
-#include "usbstring.c"
 #include "epautoconf.c"
 #include "config.c"
 #include "composite.c"
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4d25b9009edf..24e9bbd255a7 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -9,6 +9,7 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/string.h>
 #include <linux/device.h>
@@ -68,4 +69,5 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
 	buf [1] = USB_DT_STRING;
 	return buf [0];
 }
-
+EXPORT_SYMBOL_GPL(usb_gadget_get_string);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 2a617c3f5a40..dc8fd5cc4f92 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -24,7 +24,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 90df613cccc0..4469be8fcee3 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -59,7 +59,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
 
-- 
cgit v1.2.3


From 0ba16dea72a457bf65fc06ef60165c994e2f7420 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:10 +0200
Subject: usb: gadget: libcomposite: move config.c into libcomposite

This patch moves config.c into libcomposite and updates all gadgets.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Makefile         | 2 +-
 drivers/usb/gadget/acm_ms.c         | 1 -
 drivers/usb/gadget/audio.c          | 1 -
 drivers/usb/gadget/cdc2.c           | 1 -
 drivers/usb/gadget/config.c         | 6 ++++--
 drivers/usb/gadget/ether.c          | 1 -
 drivers/usb/gadget/file_storage.c   | 1 -
 drivers/usb/gadget/g_ffs.c          | 1 -
 drivers/usb/gadget/gmidi.c          | 1 -
 drivers/usb/gadget/hid.c            | 1 -
 drivers/usb/gadget/mass_storage.c   | 1 -
 drivers/usb/gadget/multi.c          | 1 -
 drivers/usb/gadget/ncm.c            | 1 -
 drivers/usb/gadget/nokia.c          | 1 -
 drivers/usb/gadget/printer.c        | 1 -
 drivers/usb/gadget/serial.c         | 1 -
 drivers/usb/gadget/tcm_usb_gadget.c | 1 -
 drivers/usb/gadget/webcam.c         | 1 -
 drivers/usb/gadget/zero.c           | 1 -
 19 files changed, 5 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index eadbc86333f6..9515ed0163b7 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,7 +5,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
-libcomposite-y			:= usbstring.o
+libcomposite-y			:= usbstring.o config.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 9820960dfc5c..3078d797f634 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -42,7 +42,6 @@
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 76e54b44c27a..9e85df22e796 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -27,7 +27,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 /* string IDs are assigned dynamically */
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 74a9c7f65ec8..d06d0791c70e 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -44,7 +44,6 @@
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 7542a72ce51a..e3a98929d346 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -12,6 +12,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/string.h>
 #include <linux/device.h>
@@ -53,7 +54,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen,
 	}
 	return dest - (u8 *)buf;
 }
-
+EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf);
 
 /**
  * usb_gadget_config_buf - builts a complete configuration descriptor
@@ -106,6 +107,7 @@ int usb_gadget_config_buf(
 	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
 	return len;
 }
+EXPORT_SYMBOL_GPL(usb_gadget_config_buf);
 
 /**
  * usb_copy_descriptors - copy a vector of USB descriptors
@@ -155,4 +157,4 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
 
 	return ret;
 }
-
+EXPORT_SYMBOL_GPL(usb_copy_descriptors);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index e16094e5d1d2..557021e267ee 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -103,7 +103,6 @@ static inline bool has_rndis(void)
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_ecm.c"
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 8d0166b76d40..77cf1083099f 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -265,7 +265,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "config.c"
 #include "epautoconf.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 407b5ccc64a4..240957048d3f 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -24,7 +24,6 @@
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 135b3900eaa3..68a79b42c5a8 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -38,7 +38,6 @@
 #include "gadget_chips.h"
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 #include "f_midi.c"
 
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index effda2e0742b..917c6eda916a 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -35,7 +35,6 @@
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_hid.c"
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index a7f32c312a6b..9675e61c9a8d 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -49,7 +49,6 @@
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 #include "f_mass_storage.c"
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 71c1fabdbb78..6b6c12802afc 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -44,7 +44,6 @@ MODULE_LICENSE("GPL");
  */
 
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_mass_storage.c"
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index d7e6b1ee8664..ce8d08e44602 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -37,7 +37,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_ncm.c"
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 474c77ca58c0..e2f4b9bdebc3 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -39,7 +39,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "u_serial.c"
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index c55e7d99b810..310b22d423a7 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -52,7 +52,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 88baa9e3f827..39990bed0905 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -38,7 +38,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_acm.c"
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 327af6883715..926e0facfba5 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -26,7 +26,6 @@
 #include <asm/unaligned.h>
 
 #include "epautoconf.c"
-#include "config.c"
 #include "composite.c"
 
 #include "tcm_usb_gadget.h"
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index dc8fd5cc4f92..5e500e8403fd 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -24,7 +24,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "uvc_queue.c"
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 4469be8fcee3..e39a3b5da101 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -59,7 +59,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "config.c"
 #include "epautoconf.c"
 
 #include "f_sourcesink.c"
-- 
cgit v1.2.3


From e87bb7118c4f752de4616a7ab56c51ed3e7f6f53 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:11 +0200
Subject: usb: gadget: move global vars from epautoconf into struct usb_gadget

epautoconf has two global variables which count the endpoint number of
last assigned endpoint.
This patch removes the global variable and keeps it as per (UDC) gadget.
While here, the ifdef is removed and now the in and outpoint are
enumerated unconditionally. The dwc3 for instance supports 32 endpoints
in total.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/epautoconf.c | 27 ++++++---------------------
 include/linux/usb/gadget.h      |  4 ++++
 2 files changed, 10 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 51f3d42f5a64..d5a905dbed00 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,17 +22,6 @@
 
 #include "gadget_chips.h"
 
-
-/* we must assign addresses for configurable endpoints (like net2280) */
-static unsigned epnum;
-
-// #define MANY_ENDPOINTS
-#ifdef MANY_ENDPOINTS
-/* more than 15 configurable endpoints */
-static unsigned in_epnum;
-#endif
-
-
 /*
  * This should work with endpoints from controller drivers sharing the
  * same endpoint naming convention.  By example:
@@ -176,16 +165,14 @@ ep_matches (
 	if (isdigit (ep->name [2])) {
 		u8	num = simple_strtoul (&ep->name [2], NULL, 10);
 		desc->bEndpointAddress |= num;
-#ifdef	MANY_ENDPOINTS
 	} else if (desc->bEndpointAddress & USB_DIR_IN) {
-		if (++in_epnum > 15)
+		if (++gadget->in_epnum > 15)
 			return 0;
-		desc->bEndpointAddress = USB_DIR_IN | in_epnum;
-#endif
+		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
 	} else {
-		if (++epnum > 15)
+		if (++gadget->out_epnum > 15)
 			return 0;
-		desc->bEndpointAddress |= epnum;
+		desc->bEndpointAddress |= gadget->out_epnum;
 	}
 
 	/* report (variable) full speed bulk maxpacket */
@@ -385,9 +372,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		ep->driver_data = NULL;
 	}
-#ifdef	MANY_ENDPOINTS
-	in_epnum = 0;
-#endif
-	epnum = 0;
+	gadget->in_epnum = 0;
+	gadget->out_epnum = 0;
 }
 
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 822c1b88f95a..5b6e50888248 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -503,6 +503,8 @@ struct usb_gadget_ops {
  * @name: Identifies the controller hardware type.  Used in diagnostics
  *	and sometimes configuration.
  * @dev: Driver model state for this abstract device.
+ * @out_epnum: last used out ep number
+ * @in_epnum: last used in ep number
  *
  * Gadgets have a mostly-portable "gadget driver" implementing device
  * functions, handling all usb configurations and interfaces.  Gadget
@@ -537,6 +539,8 @@ struct usb_gadget {
 	unsigned			a_alt_hnp_support:1;
 	const char			*name;
 	struct device			dev;
+	unsigned			out_epnum;
+	unsigned			in_epnum;
 };
 
 static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
-- 
cgit v1.2.3


From dc995fc27c2e1c8edebfb2405ede23bd38153f7f Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:12 +0200
Subject: usb: gadget: libcomposite: add epautoconf.c to libcomposite

This patch adds epautoconf.c into libcomposite and updates all gadgets.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Makefile         |  2 +-
 drivers/usb/gadget/acm_ms.c         |  1 -
 drivers/usb/gadget/audio.c          |  2 +-
 drivers/usb/gadget/cdc2.c           |  1 -
 drivers/usb/gadget/dbgp.c           |  3 ---
 drivers/usb/gadget/epautoconf.c     |  6 ++++--
 drivers/usb/gadget/ether.c          |  1 -
 drivers/usb/gadget/file_storage.c   | 13 -------------
 drivers/usb/gadget/g_ffs.c          |  1 -
 drivers/usb/gadget/gadget_chips.h   |  2 ++
 drivers/usb/gadget/gmidi.c          |  1 -
 drivers/usb/gadget/hid.c            |  2 +-
 drivers/usb/gadget/mass_storage.c   |  1 -
 drivers/usb/gadget/multi.c          |  1 -
 drivers/usb/gadget/ncm.c            |  1 -
 drivers/usb/gadget/nokia.c          |  1 -
 drivers/usb/gadget/printer.c        |  1 -
 drivers/usb/gadget/serial.c         |  1 -
 drivers/usb/gadget/tcm_usb_gadget.c |  1 -
 drivers/usb/gadget/webcam.c         |  1 -
 drivers/usb/gadget/zero.c           |  1 -
 21 files changed, 9 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9515ed0163b7..23d705f194ac 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,7 +5,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
-libcomposite-y			:= usbstring.o config.o
+libcomposite-y			:= usbstring.o config.o epautoconf.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 3078d797f634..5db661d8590b 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -42,7 +42,6 @@
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_mass_storage.c"
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 9e85df22e796..689d1422a1c0 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/utsname.h>
 
+#include "gadget_chips.h"
 #define DRIVER_DESC		"Linux USB Audio Gadget"
 #define DRIVER_VERSION		"Feb 2, 2012"
 
@@ -27,7 +28,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 /* string IDs are assigned dynamically */
 
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index d06d0791c70e..8e386cf377a5 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -44,7 +44,6 @@
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_ecm.c"
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index cc1746597aab..87d165028162 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -13,9 +13,6 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-/* See comments in "zero.c" */
-#include "epautoconf.c"
-
 #ifdef CONFIG_USB_G_DBGP_SERIAL
 #include "u_serial.c"
 #endif
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index d5a905dbed00..a777f7bd11b4 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>
@@ -315,6 +316,7 @@ found_ep:
 	ep->comp_desc = NULL;
 	return ep;
 }
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
 
 /**
  * usb_ep_autoconfig() - choose an endpoint matching the
@@ -354,7 +356,7 @@ struct usb_ep *usb_ep_autoconfig(
 {
 	return usb_ep_autoconfig_ss(gadget, desc, NULL);
 }
-
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
 
 /**
  * usb_ep_autoconfig_reset - reset endpoint autoconfig state
@@ -375,4 +377,4 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 	gadget->in_epnum = 0;
 	gadget->out_epnum = 0;
 }
-
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 557021e267ee..39eb718f796a 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -103,7 +103,6 @@ static inline bool has_rndis(void)
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_ecm.c"
 #include "f_subset.c"
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 77cf1083099f..ce362f7e39d3 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -256,19 +256,6 @@
 
 #include "gadget_chips.h"
 
-
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "epautoconf.c"
-
-/*-------------------------------------------------------------------------*/
-
 #define DRIVER_DESC		"File-backed Storage Gadget"
 #define DRIVER_NAME		"g_file_storage"
 #define DRIVER_VERSION		"1 September 2010"
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 240957048d3f..c3a583ea9938 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -24,7 +24,6 @@
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
 #  if defined USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 0ccca58e7a8f..ba4e302e77d7 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -15,6 +15,8 @@
 #ifndef __GADGET_CHIPS_H
 #define __GADGET_CHIPS_H
 
+#include <linux/usb/gadget.h>
+
 /*
  * NOTICE: the entries below are alphabetical and should be kept
  * that way.
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 68a79b42c5a8..0c70708ef80f 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -38,7 +38,6 @@
 #include "gadget_chips.h"
 
 #include "composite.c"
-#include "epautoconf.c"
 #include "f_midi.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 917c6eda916a..4880cdd9de43 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/list.h>
 
+#include "gadget_chips.h"
 #define DRIVER_DESC		"HID Gadget"
 #define DRIVER_VERSION		"2010/03/16"
 
@@ -35,7 +36,6 @@
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_hid.c"
 
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 9675e61c9a8d..0b0f008427ed 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -49,7 +49,6 @@
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 6b6c12802afc..72fb30141ff4 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -44,7 +44,6 @@ MODULE_LICENSE("GPL");
  */
 
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_mass_storage.c"
 
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index ce8d08e44602..69b660b79c09 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -37,7 +37,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_ncm.c"
 #include "u_ether.c"
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index e2f4b9bdebc3..6834c6204df3 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -39,7 +39,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "u_serial.c"
 #include "f_acm.c"
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 310b22d423a7..3d3d20d258f6 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -52,7 +52,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 39990bed0905..098c3d03dedd 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -38,7 +38,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_acm.c"
 #include "f_obex.c"
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 926e0facfba5..e64a759f100d 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -25,7 +25,6 @@
 #include <target/configfs_macros.h>
 #include <asm/unaligned.h>
 
-#include "epautoconf.c"
 #include "composite.c"
 
 #include "tcm_usb_gadget.h"
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 5e500e8403fd..66dfca86b215 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -24,7 +24,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "uvc_queue.c"
 #include "uvc_video.c"
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index e39a3b5da101..9a9adee2911a 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -59,7 +59,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
-#include "epautoconf.c"
 
 #include "f_sourcesink.c"
 #include "f_loopback.c"
-- 
cgit v1.2.3


From e13f17ff8854e04cfc6b9f981a974f55d8da9b92 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:51 +0200
Subject: usb: gadget: move USB_BUFSIZ into global composite.h

This patch moves USB_BUFSIZ into global header file as
USB_COMP_EP0_BUFSIZ. There is currently only one user (f_sourcesink)
besides composite which need it. Ideally f_sourcesink would have its
own ep0 buffer. Lets keep it that way it was for now.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c    | 10 ++++------
 drivers/usb/gadget/f_sourcesink.c |  2 +-
 include/linux/usb/composite.h     |  3 +++
 3 files changed, 8 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 0b6ee2012af1..52689ee9db12 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -28,9 +28,6 @@
  * with the relevant device-wide data.
  */
 
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ	1024
-
 /* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
@@ -355,10 +352,11 @@ static int config_buf(struct usb_configuration *config,
 {
 	struct usb_config_descriptor	*c = buf;
 	void				*next = buf + USB_DT_CONFIG_SIZE;
-	int				len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+	int				len;
 	struct usb_function		*f;
 	int				status;
 
+	len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE;
 	/* write the config descriptor */
 	c = buf;
 	c->bLength = USB_DT_CONFIG_SIZE;
@@ -1445,13 +1443,13 @@ static int composite_bind(struct usb_gadget *gadget,
 	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
 	if (!cdev->req)
 		goto fail;
-	cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
+	cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
 	if (!cdev->req->buf)
 		goto fail;
 	cdev->req->complete = composite_setup_complete;
 	gadget->ep0->driver_data = cdev;
 
-	cdev->bufsiz = USB_BUFSIZ;
+	cdev->bufsiz = USB_COMP_EP0_BUFSIZ;
 	cdev->driver = composite;
 
 	/*
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 5c1b68b63c98..3c126fde6e7e 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -795,7 +795,7 @@ static int sourcesink_setup(struct usb_configuration *c,
 	u16			w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
-	req->length = USB_BUFSIZ;
+	req->length = USB_COMP_EP0_BUFSIZ;
 
 	/* composite driver infrastructure handles everything except
 	 * the two control test requests.
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 43d6b9ca51b7..89d91b671eb0 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -46,6 +46,9 @@
  */
 #define USB_GADGET_DELAYED_STATUS       0x7fff	/* Impossibly large value */
 
+/* big enough to hold our biggest descriptor */
+#define USB_COMP_EP0_BUFSIZ	1024
+
 struct usb_configuration;
 
 /**
-- 
cgit v1.2.3


From 40bfef0535e8a10486c9d81fd2f55e3b9dc71db6 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:52 +0200
Subject: usb: gadget: remove bufsiz from struct usb_composite_dev

there is no read user of bufsiz, its content is available via
USB_COMP_EP0_BUFSIZ. Remove it.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 1 -
 include/linux/usb/composite.h  | 2 --
 2 files changed, 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 52689ee9db12..16b353fa160a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1449,7 +1449,6 @@ static int composite_bind(struct usb_gadget *gadget,
 	cdev->req->complete = composite_setup_complete;
 	gadget->ep0->driver_data = cdev;
 
-	cdev->bufsiz = USB_COMP_EP0_BUFSIZ;
 	cdev->driver = composite;
 
 	/*
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 89d91b671eb0..e970fba6dbbb 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -318,7 +318,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
  * struct usb_composite_device - represents one composite usb gadget
  * @gadget: read-only, abstracts the gadget's usb peripheral controller
  * @req: used for control responses; buffer is pre-allocated
- * @bufsiz: size of buffer pre-allocated in @req
  * @config: the currently active configuration
  *
  * One of these devices is allocated and initialized before the
@@ -349,7 +348,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
 struct usb_composite_dev {
 	struct usb_gadget		*gadget;
 	struct usb_request		*req;
-	unsigned			bufsiz;
 
 	struct usb_configuration	*config;
 
-- 
cgit v1.2.3


From 72258493ec4f77a772d05a8df5ee663e1e24154b Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:15 +0200
Subject: usb: gadget: make composite module options readonly only

This is a partly revert of 4fffd6e5 ("usb: gadget: composite: make
module parameters accessible at runtime").
It is not possible to change the VID or other property for a gadget
right now. This change has been made for Anrdoid gadget which has this
functionality in its copy of the file. This function is executed currently
only once and most caller in tree are __init.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 16b353fa160a..8d81a5ccfa03 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -34,27 +34,27 @@
  */
 
 static ushort idVendor;
-module_param(idVendor, ushort, 0644);
+module_param(idVendor, ushort, S_IRUGO);
 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 
 static ushort idProduct;
-module_param(idProduct, ushort, 0644);
+module_param(idProduct, ushort, S_IRUGO);
 MODULE_PARM_DESC(idProduct, "USB Product ID");
 
 static ushort bcdDevice;
-module_param(bcdDevice, ushort, 0644);
+module_param(bcdDevice, ushort, S_IRUGO);
 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 
 static char *iManufacturer;
-module_param(iManufacturer, charp, 0644);
+module_param(iManufacturer, charp, S_IRUGO);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 
 static char *iProduct;
-module_param(iProduct, charp, 0644);
+module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
 static char *iSerialNumber;
-module_param(iSerialNumber, charp, 0644);
+module_param(iSerialNumber, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
 
 static char composite_manufacturer[50];
@@ -1478,16 +1478,12 @@ static int composite_bind(struct usb_gadget *gadget,
 	/* standardized runtime overrides for device ID data */
 	if (idVendor)
 		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	else
-		idVendor = le16_to_cpu(cdev->desc.idVendor);
+
 	if (idProduct)
 		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	else
-		idProduct = le16_to_cpu(cdev->desc.idProduct);
+
 	if (bcdDevice)
 		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-	else
-		bcdDevice = le16_to_cpu(cdev->desc.bcdDevice);
 
 	/* string overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
-- 
cgit v1.2.3


From e1f15ccbae40b55a4e2591373ea5f1808cf29855 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:16 +0200
Subject: usb: gadget: use usb_string_ids_tab instead multiple usb_string_id()

Using usb_string_ids_tab() instead multiple calls of usb_string_id()
seems to be handy. It also allows to add string without many checks.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c | 12 +++---------
 drivers/usb/gadget/audio.c  | 12 +++---------
 drivers/usb/gadget/cdc2.c   | 12 +++---------
 drivers/usb/gadget/ether.c  | 12 +++---------
 drivers/usb/gadget/gmidi.c  | 21 ++++-----------------
 drivers/usb/gadget/hid.c    | 11 +++--------
 drivers/usb/gadget/ncm.c    | 12 +++---------
 drivers/usb/gadget/nokia.c  | 22 ++++------------------
 drivers/usb/gadget/serial.c | 22 ++++------------------
 drivers/usb/gadget/webcam.c | 21 ++++++++-------------
 drivers/usb/gadget/zero.c   | 26 ++++++++------------------
 11 files changed, 46 insertions(+), 137 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 5db661d8590b..ea349bab7f15 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -192,17 +192,11 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail1;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 689d1422a1c0..5702ce3777fb 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -165,17 +165,11 @@ static int __init audio_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		cdev->gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &audio_config_driver, audio_do_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 8e386cf377a5..3b89fe2bd0b8 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -193,17 +193,11 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail1;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 39eb718f796a..004c6ed79e3b 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -345,17 +345,11 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	/* register our configuration(s); RNDIS first, if it's used */
 	if (has_rndis()) {
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0c70708ef80f..68f8c032ba6b 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -140,25 +140,12 @@ static int __init midi_bind(struct usb_composite_dev *cdev)
 	struct usb_gadget *gadget = cdev->gadget;
 	int gcnum, status;
 
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
-	midi_config.iConfiguration = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id;
 
 	gcnum = usb_gadget_controller_number(gadget);
 	if (gcnum < 0) {
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 4880cdd9de43..1e3f03be94df 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -176,17 +176,12 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
 
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &config_driver, do_config);
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 69b660b79c09..6c7e15984535 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -180,17 +180,11 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &ncm_config_driver,
 				ncm_do_config);
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 6834c6204df3..b0893136a05d 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -164,26 +164,12 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto err_ether;
 
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto err_usb;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto err_usb;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto err_usb;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	nokia_config_500ma_driver.iConfiguration = status;
 	nokia_config_100ma_driver.iConfiguration = status;
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 098c3d03dedd..9962504e14f1 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -175,26 +175,12 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	serial_config_driver.iConfiguration = status;
 
 	/* set up other descriptors */
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 66dfca86b215..d44a4510a65a 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -355,20 +355,15 @@ webcam_bind(struct usb_composite_dev *cdev)
 	/* Allocate string descriptor numbers ... note that string contents
 	 * can be overridden by the composite_dev glue.
 	 */
-	if ((ret = usb_string_id(cdev)) < 0)
+	ret = usb_string_ids_tab(cdev, webcam_strings);
+	if (ret < 0)
 		goto error;
-	webcam_strings[STRING_MANUFACTURER_IDX].id = ret;
-	webcam_device_descriptor.iManufacturer = ret;
-
-	if ((ret = usb_string_id(cdev)) < 0)
-		goto error;
-	webcam_strings[STRING_PRODUCT_IDX].id = ret;
-	webcam_device_descriptor.iProduct = ret;
-
-	if ((ret = usb_string_id(cdev)) < 0)
-		goto error;
-	webcam_strings[STRING_DESCRIPTION_IDX].id = ret;
-	webcam_config_driver.iConfiguration = ret;
+	webcam_device_descriptor.iManufacturer =
+		webcam_strings[STRING_MANUFACTURER_IDX].id;
+	webcam_device_descriptor.iProduct =
+		webcam_strings[STRING_PRODUCT_IDX].id;
+	webcam_config_driver.iConfiguration =
+		webcam_strings[STRING_DESCRIPTION_IDX].id;
 
 	/* Register our configuration. */
 	if ((ret = usb_add_config(cdev, &webcam_config_driver,
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 9a9adee2911a..dbc336e3ba98 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -264,28 +264,18 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
-	int			id;
+	int			status;
 
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_MANUFACTURER_IDX].id = id;
-	device_desc.iManufacturer = id;
-
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_PRODUCT_IDX].id = id;
-	device_desc.iProduct = id;
-
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_SERIAL_IDX].id = id;
-	device_desc.iSerialNumber = id;
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		return status;
+
+	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings_dev[STRING_SERIAL_IDX].id;
 
 	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
 
-- 
cgit v1.2.3


From 5a175bb84d7344fbe5e26cf61b597129e7c80564 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:17 +0200
Subject: usb: gadget: make g_printer enumerate again

This was broken in 2e87edf49 ("usb: gadget: make g_printer use
composite").
The USB-strings were not setup properly and were not used. No function
was added which results in an empty USB config.
While fixing this, the interface number is now auto generated and not
hard coded to 0.

Cc: stable@vger.kernel.org # v3.5
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/printer.c | 128 ++++++++++++++++++++++---------------------
 1 file changed, 65 insertions(+), 63 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 3d3d20d258f6..51b6e7bf413e 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -138,18 +138,14 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-#define STRING_MANUFACTURER		1
-#define STRING_PRODUCT			2
-#define STRING_SERIALNUM		3
+#define STRING_MANUFACTURER		0
+#define STRING_PRODUCT			1
+#define STRING_SERIALNUM		2
 
 /* holds our biggest descriptor */
 #define USB_DESC_BUFSIZE		256
 #define USB_BUFSIZE			8192
 
-/* This device advertises one configuration. */
-#define DEV_CONFIG_VALUE		1
-#define	PRINTER_INTERFACE		0
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -159,16 +155,12 @@ static struct usb_device_descriptor device_desc = {
 	.bDeviceProtocol =	0,
 	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
 	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
-	.iManufacturer =	STRING_MANUFACTURER,
-	.iProduct =		STRING_PRODUCT,
-	.iSerialNumber =	STRING_SERIALNUM,
 	.bNumConfigurations =	1
 };
 
 static struct usb_interface_descriptor intf_desc = {
 	.bLength =		sizeof intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	PRINTER_INTERFACE,
 	.bNumEndpoints =	2,
 	.bInterfaceClass =	USB_CLASS_PRINTER,
 	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
@@ -257,9 +249,9 @@ static char				pnp_string [1024] =
 
 /* static strings, in UTF-8 */
 static struct usb_string		strings [] = {
-	{ STRING_MANUFACTURER,	manufacturer, },
-	{ STRING_PRODUCT,	product_desc, },
-	{ STRING_SERIALNUM,	serial_num, },
+	[STRING_MANUFACTURER].s = manufacturer,
+	[STRING_PRODUCT].s = product_desc,
+	[STRING_SERIALNUM].s =	serial_num,
 	{  }		/* end of list */
 };
 
@@ -868,25 +860,13 @@ static int set_interface(struct printer_dev *dev, unsigned number)
 	int			result = 0;
 
 	/* Free the current interface */
-	switch (dev->interface) {
-	case PRINTER_INTERFACE:
-		printer_reset_interface(dev);
-		break;
-	}
+	printer_reset_interface(dev);
 
-	switch (number) {
-	case PRINTER_INTERFACE:
-		result = set_printer_interface(dev);
-		if (result) {
-			printer_reset_interface(dev);
-		} else {
-			dev->interface = PRINTER_INTERFACE;
-		}
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	}
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
 
 	if (!result)
 		INFO(dev, "Using interface %x\n", number);
@@ -969,7 +949,7 @@ static int printer_func_setup(struct usb_function *f,
 		switch (ctrl->bRequest) {
 		case 0: /* Get the IEEE-1284 PNP String */
 			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != PRINTER_INTERFACE)
+			if ((wIndex>>8) != dev->interface)
 				break;
 
 			value = (pnp_string[0]<<8)|pnp_string[1];
@@ -980,7 +960,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 1: /* Get Port Status */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			*(u8 *)req->buf = dev->printer_status;
@@ -989,7 +969,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 2: /* Soft Reset */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			printer_soft_reset(dev);
@@ -1017,6 +997,37 @@ unknown:
 static int __init printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep		*in_ep, *out_ep;
+	int id;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
 	return 0;
 }
 
@@ -1032,7 +1043,8 @@ static int printer_func_set_alt(struct usb_function *f,
 	int ret = -ENOTSUPP;
 
 	if (!alt)
-		ret = set_interface(dev, PRINTER_INTERFACE);
+		ret = set_interface(dev, intf);
+
 	return ret;
 }
 
@@ -1104,13 +1116,14 @@ static int __init printer_bind_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
-	struct usb_ep		*in_ep, *out_ep;
 	int			status = -ENOMEM;
 	int			gcnum;
 	size_t			len;
 	u32			i;
 	struct usb_request	*req;
 
+	usb_ep_autoconfig_reset(gadget);
+
 	dev = &usb_printer_gadget;
 
 	dev->function.name = shortname;
@@ -1122,6 +1135,10 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	dev->function.set_alt = printer_func_set_alt;
 	dev->function.disable = printer_func_disable;
 
+	status = usb_add_function(c, &dev->function);
+	if (status)
+		return status;
+
 	/* Setup the sysfs files for the printer gadget. */
 	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
 				  NULL, "g_printer");
@@ -1166,26 +1183,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	pnp_string[0] = (len >> 8) & 0xFF;
 	pnp_string[1] = len & 0xFF;
 
-	/* all we really need is bulk IN/OUT */
-	usb_ep_autoconfig_reset(gadget);
-	in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&gadget->dev, "can't autoconfigure on %s\n",
-			gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget->is_otg) {
@@ -1212,9 +1209,6 @@ autoconf_fail:
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
 
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req) {
@@ -1247,8 +1241,6 @@ autoconf_fail:
 	dev->gadget = gadget;
 
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
-			in_ep->name);
 	return 0;
 
 fail:
@@ -1263,7 +1255,17 @@ static int printer_unbind(struct usb_composite_dev *cdev)
 
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
-	return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	int ret;
+
+	ret = usb_string_ids_tab(cdev, strings);
+	if (ret < 0)
+		return ret;
+	device_desc.iManufacturer = strings[STRING_MANUFACTURER].id;
+	device_desc.iProduct = strings[STRING_PRODUCT].id;
+	device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
+
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	return ret;
 }
 
 static __refdata struct usb_composite_driver printer_driver = {
-- 
cgit v1.2.3


From 18786da4853017d983ff6911648543ca617c12d1 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:18 +0200
Subject: usb: gadget: initialize the strings in tcm_usb_gadget properly

I have no idea what I've been thinking while I was doing this in the first
place. Now the strings are initialized properly and reported by lsusb.

Cc: stable@vger.kernel.org # v3.5
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/tcm_usb_gadget.c | 33 ++++++++++++++++++++-------------
 drivers/usb/gadget/tcm_usb_gadget.h | 14 ++++++++------
 2 files changed, 28 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index e64a759f100d..2f4980881a80 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1974,7 +1974,6 @@ static struct usb_interface_descriptor bot_intf_desc = {
 	.bInterfaceClass =      USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =   USB_SC_SCSI,
 	.bInterfaceProtocol =   USB_PR_BULK,
-	.iInterface =           USB_G_STR_INT_UAS,
 };
 
 static struct usb_interface_descriptor uasp_intf_desc = {
@@ -1985,7 +1984,6 @@ static struct usb_interface_descriptor uasp_intf_desc = {
 	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =	USB_SC_SCSI,
 	.bInterfaceProtocol =	USB_PR_UAS,
-	.iInterface =		USB_G_STR_INT_BBB,
 };
 
 static struct usb_endpoint_descriptor uasp_bi_desc = {
@@ -2206,20 +2204,16 @@ static struct usb_device_descriptor usbg_device_desc = {
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.idVendor =		cpu_to_le16(UAS_VENDOR_ID),
 	.idProduct =		cpu_to_le16(UAS_PRODUCT_ID),
-	.iManufacturer =	USB_G_STR_MANUFACTOR,
-	.iProduct =		USB_G_STR_PRODUCT,
-	.iSerialNumber =	USB_G_STR_SERIAL,
-
 	.bNumConfigurations =   1,
 };
 
 static struct usb_string	usbg_us_strings[] = {
-	{ USB_G_STR_MANUFACTOR,	"Target Manufactor"},
-	{ USB_G_STR_PRODUCT,	"Target Product"},
-	{ USB_G_STR_SERIAL,	"000000000001"},
-	{ USB_G_STR_CONFIG,	"default config"},
-	{ USB_G_STR_INT_UAS,	"USB Attached SCSI"},
-	{ USB_G_STR_INT_BBB,	"Bulk Only Transport"},
+	[USB_G_STR_MANUFACTOR].s	= "Target Manufactor",
+	[USB_G_STR_PRODUCT].s		= "Target Product",
+	[USB_G_STR_SERIAL].s		= "000000000001",
+	[USB_G_STR_CONFIG].s		= "default config",
+	[USB_G_STR_INT_UAS].s		= "USB Attached SCSI",
+	[USB_G_STR_INT_BBB].s		= "Bulk Only Transport",
 	{ },
 };
 
@@ -2241,7 +2235,6 @@ static int guas_unbind(struct usb_composite_dev *cdev)
 static struct usb_configuration usbg_config_driver = {
 	.label                  = "Linux Target",
 	.bConfigurationValue    = 1,
-	.iConfiguration		= USB_G_STR_CONFIG,
 	.bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 };
 
@@ -2414,6 +2407,9 @@ static int usbg_cfg_bind(struct usb_configuration *c)
 	fu->function.disable = usbg_disable;
 	fu->tpg = the_only_tpg_I_currently_have;
 
+	bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id;
+	uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id;
+
 	ret = usb_add_function(c, &fu->function);
 	if (ret)
 		goto err;
@@ -2428,6 +2424,17 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
 
+	ret = usb_string_ids_tab(cdev, usbg_us_strings);
+	if (ret)
+		return ret;
+
+	usbg_device_desc.iManufacturer =
+		usbg_us_strings[USB_G_STR_MANUFACTOR].id;
+	usbg_device_desc.iProduct = usbg_us_strings[USB_G_STR_PRODUCT].id;
+	usbg_device_desc.iSerialNumber = usbg_us_strings[USB_G_STR_SERIAL].id;
+	usbg_config_driver.iConfiguration =
+		usbg_us_strings[USB_G_STR_CONFIG].id;
+
 	ret = usb_add_config(cdev, &usbg_config_driver,
 			usbg_cfg_bind);
 	return 0;
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h
index bb18999a9a8d..9d32ec30f4e4 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.h
+++ b/drivers/usb/gadget/tcm_usb_gadget.h
@@ -16,12 +16,14 @@
 #define UASP_SS_EP_COMP_LOG_STREAMS 4
 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
 
-#define USB_G_STR_MANUFACTOR    1
-#define USB_G_STR_PRODUCT       2
-#define USB_G_STR_SERIAL        3
-#define USB_G_STR_CONFIG        4
-#define USB_G_STR_INT_UAS       5
-#define USB_G_STR_INT_BBB       6
+enum {
+	USB_G_STR_MANUFACTOR,
+	USB_G_STR_PRODUCT,
+	USB_G_STR_SERIAL,
+	USB_G_STR_CONFIG,
+	USB_G_STR_INT_UAS,
+	USB_G_STR_INT_BBB,
+};
 
 #define USB_G_ALT_INT_BBB       0
 #define USB_G_ALT_INT_UAS       1
-- 
cgit v1.2.3


From 3b4a3fc0ba83265c0bfcfdfc3416e65e47441747 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:19 +0200
Subject: usb: gadget: move usb_gadget_controller_number() into a .c file and
 libcomposite

After I moved the function from the header file to the c file I see:

| $ size drivers/usb/gadget/gadget_chips.o
| text    data     bss     dec     hex filename
| 1048       0       0    1048     418 drivers/usb/gadget/gadget_chips.o

That is almost a KiB which is removed from each user.
As Felipe pointed out, the function / usage is very dumb actually. This is
used for the following reasons:
- epautoconf ep hint (could provide a per-gadget callback)
- miss-features. currently the missing altsetting on pxa's and something
  ZLP related on musbhdrc (looks like an optimisation which could be
  implemented in musb itself if it is correct)
- unique BCD accross all UDCs. Not sure how important this is.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Makefile       |  2 +-
 drivers/usb/gadget/gadget_chips.c | 94 +++++++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/gadget_chips.h | 76 +------------------------------
 3 files changed, 96 insertions(+), 76 deletions(-)
 create mode 100644 drivers/usb/gadget/gadget_chips.c

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 23d705f194ac..4fec0e8ee000 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,7 +5,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
-libcomposite-y			:= usbstring.o config.o epautoconf.o
+libcomposite-y			:= usbstring.o config.o epautoconf.o gadget_chips.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/gadget_chips.c b/drivers/usb/gadget/gadget_chips.c
new file mode 100644
index 000000000000..6387d43d3f8c
--- /dev/null
+++ b/drivers/usb/gadget/gadget_chips.c
@@ -0,0 +1,94 @@
+/*
+ * USB device controllers have lots of quirks.  Use these macros in
+ * gadget drivers or other code that needs to deal with them, and which
+ * autoconfigures instead of using early binding to the hardware.
+ *
+ * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
+ * some config file that gets updated as new hardware is supported.
+ * (And avoiding all runtime comparisons in typical one-choice configs!)
+ *
+ * NOTE:  some of these controller drivers may not be available yet.
+ * Some are available on 2.4 kernels; several are available, but not
+ * yet pushed in the 2.6 mainline tree.
+ */
+
+#include <linux/usb/gadget.h>
+#include <linux/module.h>
+
+#include "gadget_chips.h"
+
+/**
+ * usb_gadget_controller_number - support bcdDevice id convention
+ * @gadget: the controller being driven
+ *
+ * Return a 2-digit BCD value associated with the peripheral controller,
+ * suitable for use as part of a bcdDevice value, or a negative error code.
+ *
+ * NOTE:  this convention is purely optional, and has no meaning in terms of
+ * any USB specification.  If you want to use a different convention in your
+ * gadget driver firmware -- maybe a more formal revision ID -- feel free.
+ *
+ * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
+ * to change their behavior accordingly.  For example it might help avoiding
+ * some chip bug.
+ */
+int usb_gadget_controller_number(struct usb_gadget *gadget)
+{
+	if (gadget_is_net2280(gadget))
+		return 0x01;
+	else if (gadget_is_dummy(gadget))
+		return 0x02;
+	else if (gadget_is_pxa(gadget))
+		return 0x03;
+	else if (gadget_is_goku(gadget))
+		return 0x06;
+	else if (gadget_is_omap(gadget))
+		return 0x08;
+	else if (gadget_is_pxa27x(gadget))
+		return 0x11;
+	else if (gadget_is_s3c2410(gadget))
+		return 0x12;
+	else if (gadget_is_at91(gadget))
+		return 0x13;
+	else if (gadget_is_imx(gadget))
+		return 0x14;
+	else if (gadget_is_musbhdrc(gadget))
+		return 0x16;
+	else if (gadget_is_atmel_usba(gadget))
+		return 0x18;
+	else if (gadget_is_fsl_usb2(gadget))
+		return 0x19;
+	else if (gadget_is_amd5536udc(gadget))
+		return 0x20;
+	else if (gadget_is_m66592(gadget))
+		return 0x21;
+	else if (gadget_is_fsl_qe(gadget))
+		return 0x22;
+	else if (gadget_is_ci13xxx_pci(gadget))
+		return 0x23;
+	else if (gadget_is_langwell(gadget))
+		return 0x24;
+	else if (gadget_is_r8a66597(gadget))
+		return 0x25;
+	else if (gadget_is_s3c_hsotg(gadget))
+		return 0x26;
+	else if (gadget_is_pch(gadget))
+		return 0x27;
+	else if (gadget_is_ci13xxx_msm(gadget))
+		return 0x28;
+	else if (gadget_is_renesas_usbhs(gadget))
+		return 0x29;
+	else if (gadget_is_s3c_hsudc(gadget))
+		return 0x30;
+	else if (gadget_is_net2272(gadget))
+		return 0x31;
+	else if (gadget_is_dwc3(gadget))
+		return 0x32;
+	else if (gadget_is_lpc32xx(gadget))
+		return 0x33;
+	else if (gadget_is_bcm63xx(gadget))
+		return 0x34;
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_controller_number);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ba4e302e77d7..c7055cd1e92e 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -55,81 +55,7 @@
 #define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
 #define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
 
-/**
- * usb_gadget_controller_number - support bcdDevice id convention
- * @gadget: the controller being driven
- *
- * Return a 2-digit BCD value associated with the peripheral controller,
- * suitable for use as part of a bcdDevice value, or a negative error code.
- *
- * NOTE:  this convention is purely optional, and has no meaning in terms of
- * any USB specification.  If you want to use a different convention in your
- * gadget driver firmware -- maybe a more formal revision ID -- feel free.
- *
- * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
- * to change their behavior accordingly.  For example it might help avoiding
- * some chip bug.
- */
-static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
-{
-	if (gadget_is_net2280(gadget))
-		return 0x01;
-	else if (gadget_is_dummy(gadget))
-		return 0x02;
-	else if (gadget_is_pxa(gadget))
-		return 0x03;
-	else if (gadget_is_goku(gadget))
-		return 0x06;
-	else if (gadget_is_omap(gadget))
-		return 0x08;
-	else if (gadget_is_pxa27x(gadget))
-		return 0x11;
-	else if (gadget_is_s3c2410(gadget))
-		return 0x12;
-	else if (gadget_is_at91(gadget))
-		return 0x13;
-	else if (gadget_is_imx(gadget))
-		return 0x14;
-	else if (gadget_is_musbhdrc(gadget))
-		return 0x16;
-	else if (gadget_is_atmel_usba(gadget))
-		return 0x18;
-	else if (gadget_is_fsl_usb2(gadget))
-		return 0x19;
-	else if (gadget_is_amd5536udc(gadget))
-		return 0x20;
-	else if (gadget_is_m66592(gadget))
-		return 0x21;
-	else if (gadget_is_fsl_qe(gadget))
-		return 0x22;
-	else if (gadget_is_ci13xxx_pci(gadget))
-		return 0x23;
-	else if (gadget_is_langwell(gadget))
-		return 0x24;
-	else if (gadget_is_r8a66597(gadget))
-		return 0x25;
-	else if (gadget_is_s3c_hsotg(gadget))
-		return 0x26;
-	else if (gadget_is_pch(gadget))
-		return 0x27;
-	else if (gadget_is_ci13xxx_msm(gadget))
-		return 0x28;
-	else if (gadget_is_renesas_usbhs(gadget))
-		return 0x29;
-	else if (gadget_is_s3c_hsudc(gadget))
-		return 0x30;
-	else if (gadget_is_net2272(gadget))
-		return 0x31;
-	else if (gadget_is_dwc3(gadget))
-		return 0x32;
-	else if (gadget_is_lpc32xx(gadget))
-		return 0x33;
-	else if (gadget_is_bcm63xx(gadget))
-		return 0x34;
-
-	return -ENOENT;
-}
-
+int usb_gadget_controller_number(struct usb_gadget *gadget);
 
 /**
  * gadget_supports_altsettings - return true if altsettings work
-- 
cgit v1.2.3


From 7d16e8d3eb704f5f6eb5a271d5758b495634e8e6 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:53 +0200
Subject: usb: gadget: push VID/PID/USB BCD module option into gadgets

This patch moves the module options idVendor, idProduct and bcdDevice
from composite.c into each gadgets. This ensures compatibility with
current gadgets and removes the global variable which brings me step
closer towards composite.c in libcomposite

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c         |  2 ++
 drivers/usb/gadget/audio.c          |  3 ++
 drivers/usb/gadget/cdc2.c           |  2 ++
 drivers/usb/gadget/composite.c      | 63 +++++++++++++++++++++++--------------
 drivers/usb/gadget/ether.c          |  2 ++
 drivers/usb/gadget/g_ffs.c          |  4 ++-
 drivers/usb/gadget/gmidi.c          |  4 ++-
 drivers/usb/gadget/hid.c            |  2 ++
 drivers/usb/gadget/mass_storage.c   |  3 +-
 drivers/usb/gadget/multi.c          |  3 +-
 drivers/usb/gadget/ncm.c            |  2 ++
 drivers/usb/gadget/nokia.c          |  2 ++
 drivers/usb/gadget/printer.c        |  4 +++
 drivers/usb/gadget/serial.c         |  2 ++
 drivers/usb/gadget/tcm_usb_gadget.c |  5 +++
 drivers/usb/gadget/webcam.c         |  2 ++
 drivers/usb/gadget/zero.c           |  2 ++
 include/linux/usb/composite.h       | 24 ++++++++++++++
 18 files changed, 103 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index ea349bab7f15..7bd6b71af5d3 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -47,6 +47,7 @@
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -203,6 +204,7 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail1;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 	fsg_common_put(&fsg_common);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 5702ce3777fb..55b593c5a9c8 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/utsname.h>
+#include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
 #define DRIVER_DESC		"Linux USB Audio Gadget"
@@ -28,6 +29,7 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "composite.c"
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
@@ -174,6 +176,7 @@ static int __init audio_bind(struct usb_composite_dev *cdev)
 	status = usb_add_config(cdev, &audio_config_driver, audio_do_config);
 	if (status < 0)
 		goto fail;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
 	return 0;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 3b89fe2bd0b8..93a75809b4de 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -34,6 +34,7 @@
 #define CDC_PRODUCT_NUM		0xa4aa	/* CDC Composite: ECM + ACM */
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /*
  * Kbuild is not very cooperative with respect to linking separately
@@ -204,6 +205,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail1;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 8d81a5ccfa03..317a5ece3bd2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -32,19 +32,6 @@
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
-
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
 static char *iManufacturer;
 module_param(iManufacturer, charp, S_IRUGO);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
@@ -1418,6 +1405,30 @@ static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
 	return *desc;
 }
 
+static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
+		const struct usb_device_descriptor *old)
+{
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+
+	/*
+	 * these variables may have been set in
+	 * usb_composite_overwrite_options()
+	 */
+	idVendor = new->idVendor;
+	idProduct = new->idProduct;
+	bcdDevice = new->bcdDevice;
+
+	*new = *old;
+	if (idVendor)
+		new->idVendor = idVendor;
+	if (idProduct)
+		new->idProduct = idProduct;
+	if (bcdDevice)
+		new->bcdDevice = bcdDevice;
+}
+
 static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
 {
 	return container_of(gdrv, struct usb_composite_driver, gadget_driver);
@@ -1473,17 +1484,7 @@ static int composite_bind(struct usb_gadget *gadget,
 	if (status < 0)
 		goto fail;
 
-	cdev->desc = *composite->dev;
-
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+	update_unchanged_dev_desc(&cdev->desc, composite->dev);
 
 	/* string overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
@@ -1686,3 +1687,17 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev)
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
 
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+		struct usb_composite_overwrite *covr)
+{
+	struct usb_device_descriptor	*desc = &cdev->desc;
+
+	if (covr->idVendor)
+		desc->idVendor = cpu_to_le16(covr->idVendor);
+
+	if (covr->idProduct)
+		desc->idProduct = cpu_to_le16(covr->idProduct);
+
+	if (covr->bcdDevice)
+		desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
+}
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 004c6ed79e3b..709ef2265596 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -114,6 +114,7 @@ static inline bool has_rndis(void)
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  * Instead:  allocate your own, using normal USB-IF procedures.
@@ -363,6 +364,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index c3a583ea9938..a44ed661c16b 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -73,6 +73,8 @@ struct gfs_ffs_obj {
 	struct ffs_data *ffs_data;
 };
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
@@ -377,7 +379,7 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 		if (unlikely(ret < 0))
 			goto error_unbind;
 	}
-
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	return 0;
 
 error_unbind:
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 68f8c032ba6b..01b31e2d03af 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -48,6 +48,8 @@ MODULE_LICENSE("GPL v2");
 static const char shortname[] = "g_midi";
 static const char longname[] = "MIDI Gadget";
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static int index = SNDRV_DEFAULT_IDX1;
 module_param(index, int, S_IRUGO);
 MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
@@ -163,7 +165,7 @@ static int __init midi_bind(struct usb_composite_dev *cdev)
 	status = usb_add_config(cdev, &midi_config, midi_bind_config);
 	if (status < 0)
 		return status;
-
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	pr_info("%s\n", longname);
 	return 0;
 }
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 1e3f03be94df..59fe7eef00da 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -48,6 +48,7 @@ struct hidg_func_node {
 static LIST_HEAD(hidg_func_list);
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -188,6 +189,7 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 
 	return 0;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 0b0f008427ed..8ffbade383f2 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -52,6 +52,7 @@
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor msg_device_desc = {
 	.bLength =		sizeof msg_device_desc,
@@ -143,7 +144,7 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
 	if (status < 0)
 		return status;
-
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&cdev->gadget->dev,
 		 DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 	set_bit(0, &msg_registered);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 72fb30141ff4..60168877330a 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -58,7 +58,7 @@ MODULE_LICENSE("GPL");
 #endif
 #include "u_ether.c"
 
-
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /***************************** Device Descriptor ****************************/
 
@@ -307,6 +307,7 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	status = cdc_config_register(cdev);
 	if (unlikely(status < 0))
 		goto fail2;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	/* we're done */
 	dev_info(&gadget->dev, DRIVER_DESC "\n");
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 6c7e15984535..8537cd9c6aff 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -54,6 +54,7 @@
 #define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -191,6 +192,7 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s\n", DRIVER_DESC);
 
 	return 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b0893136a05d..5ed927b16c0e 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -49,6 +49,7 @@
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define NOKIA_VENDOR_ID			0x0421	/* Nokia */
 #define NOKIA_PRODUCT_ID		0x01c8	/* Nokia Gadget */
@@ -197,6 +198,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto err_usb;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME);
 
 	return 0;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 51b6e7bf413e..3fa4d80629cc 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -54,6 +54,7 @@
 #include "composite.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
 #define DRIVER_VERSION		"2007 OCT 06"
@@ -1265,6 +1266,9 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 	device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
 
 	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	if (ret)
+		return ret;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 9962504e14f1..27b5ce939bdb 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -45,6 +45,7 @@
 #include "u_serial.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* Thanks to NetChip Technologies for donating this product ID.
 *
@@ -212,6 +213,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	INFO(cdev, "%s\n", GS_VERSION_NAME);
 
 	return 0;
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 2f4980881a80..fa3137ef228b 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -29,6 +29,8 @@
 
 #include "tcm_usb_gadget.h"
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static struct target_fabric_configfs *usbg_fabric_configfs;
 
 static inline struct f_uas *to_f_uas(struct usb_function *f)
@@ -2437,6 +2439,9 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 
 	ret = usb_add_config(cdev, &usbg_config_driver,
 			usbg_cfg_bind);
+	if (ret)
+		return ret;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index d44a4510a65a..306006419f38 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -30,6 +30,7 @@
 #include "uvc_v4l2.c"
 #include "f_uvc.c"
 
+USB_GADGET_COMPOSITE_OPTIONS();
 /* --------------------------------------------------------------------------
  * Device descriptor
  */
@@ -370,6 +371,7 @@ webcam_bind(struct usb_composite_dev *cdev)
 					webcam_config_bind)) < 0)
 		goto error;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	INFO(cdev, "Webcam Video Gadget\n");
 	return 0;
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index dbc336e3ba98..2b31a4ae26b9 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -64,6 +64,7 @@
 #include "f_loopback.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_VERSION		"Cinco de Mayo 2008"
 
@@ -305,6 +306,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 			longname, gadget->name);
 		device_desc.bcdDevice = cpu_to_le16(0x9999);
 	}
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index e970fba6dbbb..7651e5bf7487 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -381,6 +381,30 @@ extern int usb_string_ids_tab(struct usb_composite_dev *c,
 			      struct usb_string *str);
 extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
 
+/*
+ * Some systems will need runtime overrides for the  product identifiers
+ * published in the device descriptor, either numbers or strings or both.
+ * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+struct usb_composite_overwrite {
+	u16	idVendor;
+	u16	idProduct;
+	u16	bcdDevice;
+};
+#define USB_GADGET_COMPOSITE_OPTIONS()					\
+	static struct usb_composite_overwrite coverwrite;		\
+									\
+	module_param_named(idVendor, coverwrite.idVendor, ushort, S_IRUGO); \
+	MODULE_PARM_DESC(idVendor, "USB Vendor ID");			\
+									\
+	module_param_named(idProduct, coverwrite.idProduct, ushort, S_IRUGO); \
+	MODULE_PARM_DESC(idProduct, "USB Product ID");			\
+									\
+	module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \
+	MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)")
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+		struct usb_composite_overwrite *covr);
 
 /* messaging utils */
 #define DBG(d, fmt, args...) \
-- 
cgit v1.2.3


From 276e2e4f1f3e07a0ad891bf757dbcfd655ff5f91 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:21 +0200
Subject: usb: gadget: make sure each gadget is using same index for Product,
 Serial,…

The index in usb_string array is defined by the gadget. The gadget can
choose which index entry it assigns for the serial number and which the
product name. The gadget has just to ensure that the descriptor contains
the proper string id which is assigned by composite.
If the composite layer knows the index of the "default" information
which will be overwritten by module parameters, it can be used later to
overwrite it.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c         | 12 +++++-------
 drivers/usb/gadget/audio.c          | 12 +++++-------
 drivers/usb/gadget/cdc2.c           | 13 +++++--------
 drivers/usb/gadget/ether.c          | 14 +++++---------
 drivers/usb/gadget/g_ffs.c          |  8 ++++++--
 drivers/usb/gadget/gmidi.c          | 13 ++++++-------
 drivers/usb/gadget/hid.c            | 13 +++++--------
 drivers/usb/gadget/multi.c          | 13 ++++---------
 drivers/usb/gadget/ncm.c            | 13 +++++--------
 drivers/usb/gadget/nokia.c          | 13 ++++++-------
 drivers/usb/gadget/printer.c        | 16 ++++++----------
 drivers/usb/gadget/serial.c         | 13 ++++++-------
 drivers/usb/gadget/tcm_usb_gadget.c | 13 +++++++------
 drivers/usb/gadget/tcm_usb_gadget.h |  5 +----
 drivers/usb/gadget/webcam.c         | 13 ++++++-------
 drivers/usb/gadget/zero.c           | 17 ++++++-----------
 include/linux/usb/composite.h       | 12 +++++++++++-
 17 files changed, 95 insertions(+), 118 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 7bd6b71af5d3..35db6aa57281 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -90,14 +90,12 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -196,8 +194,8 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 55b593c5a9c8..8857b6eeb6a2 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -33,14 +33,12 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -170,8 +168,8 @@ static int __init audio_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &audio_config_driver, audio_do_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 93a75809b4de..8966bdec1534 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -90,15 +90,12 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -197,8 +194,8 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 709ef2265596..dd5e00d207fe 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -193,17 +193,13 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -349,8 +345,8 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration(s); RNDIS first, if it's used */
 	if (has_rndis()) {
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index a44ed661c16b..16d18873ebeb 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -116,6 +116,9 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 
 /* String IDs are assigned dynamically */
 static struct usb_string gfs_strings[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_SERIAL_IDX].s = "",
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{ .s = "FunctionFS + RNDIS" },
 #endif
@@ -369,9 +372,10 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 
 	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
 		struct gfs_configuration *c = gfs_configurations + i;
+		int sid = USB_GADGET_FIRST_AVAIL_IDX + i;
 
-		c->c.label			= gfs_strings[i].s;
-		c->c.iConfiguration		= gfs_strings[i].id;
+		c->c.label			= gfs_strings[sid].s;
+		c->c.iConfiguration		= gfs_strings[sid].id;
 		c->c.bConfigurationValue	= 1 + i;
 		c->c.bmAttributes		= USB_CONFIG_ATT_SELFPOWER;
 
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 01b31e2d03af..2ee3a74056c9 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -84,9 +84,7 @@ MODULE_PARM_DESC(out_ports, "Number of MIDI output ports");
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
@@ -101,8 +99,9 @@ static struct usb_device_descriptor device_desc = {
 };
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s	= "Grey Innovation",
-	[STRING_PRODUCT_IDX].s		= "MIDI Gadget",
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Grey Innovation",
+	[USB_GADGET_PRODUCT_IDX].s	= "MIDI Gadget",
+	[USB_GADGET_SERIAL_IDX].s	= "",
 	[STRING_DESCRIPTION_IDX].s	= "MIDI",
 	{  } /* end of list */
 };
@@ -145,8 +144,8 @@ static int __init midi_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 	midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id;
 
 	gcnum = usb_gadget_controller_number(gadget);
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 59fe7eef00da..16caf50e916d 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -91,15 +91,12 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -181,8 +178,8 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &config_driver, do_config);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 60168877330a..94b35e5539d7 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -109,21 +109,16 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 enum {
-#ifdef CONFIG_USB_G_MULTI_RNDIS
-	MULTI_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX,
 	MULTI_STRING_CDC_CONFIG_IDX,
-#endif
 };
 
 static struct usb_string strings_dev[] = {
-#ifdef CONFIG_USB_G_MULTI_RNDIS
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
 	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
-#endif
 	{  } /* end of list */
 };
 
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 8537cd9c6aff..1a26452ce4ca 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -97,15 +97,12 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -184,8 +181,8 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &ncm_config_driver,
 				ncm_do_config);
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 5ed927b16c0e..34b97f12b7da 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -56,17 +56,16 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static char manufacturer_nokia[] = "Nokia";
 static const char product_nokia[] = NOKIA_LONG_NAME;
 static const char description_nokia[] = "PC-Suite Configuration";
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer_nokia,
-	[STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer_nokia,
+	[USB_GADGET_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = description_nokia,
 	{  } /* end of list */
 };
@@ -168,8 +167,8 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto err_usb;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	nokia_config_500ma_driver.iConfiguration = status;
 	nokia_config_100ma_driver.iConfiguration = status;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 3fa4d80629cc..f02434a10dec 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -139,10 +139,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-#define STRING_MANUFACTURER		0
-#define STRING_PRODUCT			1
-#define STRING_SERIALNUM		2
-
 /* holds our biggest descriptor */
 #define USB_DESC_BUFSIZE		256
 #define USB_BUFSIZE			8192
@@ -250,9 +246,9 @@ static char				pnp_string [1024] =
 
 /* static strings, in UTF-8 */
 static struct usb_string		strings [] = {
-	[STRING_MANUFACTURER].s = manufacturer,
-	[STRING_PRODUCT].s = product_desc,
-	[STRING_SERIALNUM].s =	serial_num,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = product_desc,
+	[USB_GADGET_SERIAL_IDX].s =	serial_num,
 	{  }		/* end of list */
 };
 
@@ -1261,9 +1257,9 @@ static int __init printer_bind(struct usb_composite_dev *cdev)
 	ret = usb_string_ids_tab(cdev, strings);
 	if (ret < 0)
 		return ret;
-	device_desc.iManufacturer = strings[STRING_MANUFACTURER].id;
-	device_desc.iProduct = strings[STRING_PRODUCT].id;
-	device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
+	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
 
 	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
 	if (ret)
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 27b5ce939bdb..768a38e896f7 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -59,15 +59,14 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static char manufacturer[50];
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = GS_VERSION_NAME,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
 	{  } /* end of list */
 };
@@ -179,8 +178,8 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	serial_config_driver.iConfiguration = status;
 
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index fa3137ef228b..b56d57d59796 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -2210,9 +2210,9 @@ static struct usb_device_descriptor usbg_device_desc = {
 };
 
 static struct usb_string	usbg_us_strings[] = {
-	[USB_G_STR_MANUFACTOR].s	= "Target Manufactor",
-	[USB_G_STR_PRODUCT].s		= "Target Product",
-	[USB_G_STR_SERIAL].s		= "000000000001",
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Target Manufactor",
+	[USB_GADGET_PRODUCT_IDX].s	= "Target Product",
+	[USB_GADGET_SERIAL_IDX].s	= "000000000001",
 	[USB_G_STR_CONFIG].s		= "default config",
 	[USB_G_STR_INT_UAS].s		= "USB Attached SCSI",
 	[USB_G_STR_INT_BBB].s		= "Bulk Only Transport",
@@ -2431,9 +2431,10 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 		return ret;
 
 	usbg_device_desc.iManufacturer =
-		usbg_us_strings[USB_G_STR_MANUFACTOR].id;
-	usbg_device_desc.iProduct = usbg_us_strings[USB_G_STR_PRODUCT].id;
-	usbg_device_desc.iSerialNumber = usbg_us_strings[USB_G_STR_SERIAL].id;
+		usbg_us_strings[USB_GADGET_MANUFACTURER_IDX].id;
+	usbg_device_desc.iProduct = usbg_us_strings[USB_GADGET_PRODUCT_IDX].id;
+	usbg_device_desc.iSerialNumber =
+		usbg_us_strings[USB_GADGET_SERIAL_IDX].id;
 	usbg_config_driver.iConfiguration =
 		usbg_us_strings[USB_G_STR_CONFIG].id;
 
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h
index 9d32ec30f4e4..8289219925b8 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.h
+++ b/drivers/usb/gadget/tcm_usb_gadget.h
@@ -17,10 +17,7 @@
 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
 
 enum {
-	USB_G_STR_MANUFACTOR,
-	USB_G_STR_PRODUCT,
-	USB_G_STR_SERIAL,
-	USB_G_STR_CONFIG,
+	USB_G_STR_CONFIG = USB_GADGET_FIRST_AVAIL_IDX,
 	USB_G_STR_INT_UAS,
 	USB_G_STR_INT_BBB,
 };
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 306006419f38..03591194b17a 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -45,13 +45,12 @@ static char webcam_config_label[] = "Video";
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static struct usb_string webcam_strings[] = {
-	[STRING_MANUFACTURER_IDX].s = webcam_vendor_label,
-	[STRING_PRODUCT_IDX].s = webcam_product_label,
+	[USB_GADGET_MANUFACTURER_IDX].s = webcam_vendor_label,
+	[USB_GADGET_PRODUCT_IDX].s = webcam_product_label,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = webcam_config_label,
 	{  }
 };
@@ -360,9 +359,9 @@ webcam_bind(struct usb_composite_dev *cdev)
 	if (ret < 0)
 		goto error;
 	webcam_device_descriptor.iManufacturer =
-		webcam_strings[STRING_MANUFACTURER_IDX].id;
+		webcam_strings[USB_GADGET_MANUFACTURER_IDX].id;
 	webcam_device_descriptor.iProduct =
-		webcam_strings[STRING_PRODUCT_IDX].id;
+		webcam_strings[USB_GADGET_PRODUCT_IDX].id;
 	webcam_config_driver.iConfiguration =
 		webcam_strings[STRING_DESCRIPTION_IDX].id;
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2b31a4ae26b9..ee769c45498b 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -139,20 +139,15 @@ const struct usb_descriptor_header *otg_desc[] = {
 #endif
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_SERIAL_IDX		2
-
 static char manufacturer[50];
 
 /* default serial number takes at least two packets */
 static char serial[] = "0123456789.0123456789.0123456789";
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = longname,
-	[STRING_SERIAL_IDX].s = serial,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_PRODUCT_IDX].s = longname,
+	[USB_GADGET_SERIAL_IDX].s = serial,
 	{  }			/* end of list */
 };
 
@@ -274,9 +269,9 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
-	device_desc.iManufacturer = strings_dev[STRING_MANUFACTURER_IDX].id;
-	device_desc.iProduct = strings_dev[STRING_PRODUCT_IDX].id;
-	device_desc.iSerialNumber = strings_dev[STRING_SERIAL_IDX].id;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id;
 
 	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 7651e5bf7487..f821a3ad475d 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -248,6 +248,14 @@ int usb_add_config(struct usb_composite_dev *,
 void usb_remove_config(struct usb_composite_dev *,
 		struct usb_configuration *);
 
+/* predefined index for usb_composite_driver */
+enum {
+	USB_GADGET_MANUFACTURER_IDX	= 0,
+	USB_GADGET_PRODUCT_IDX,
+	USB_GADGET_SERIAL_IDX,
+	USB_GADGET_FIRST_AVAIL_IDX,
+};
+
 /**
  * struct usb_composite_driver - groups configurations into a gadget
  * @name: For diagnostics, identifies the driver.
@@ -261,7 +269,9 @@ void usb_remove_config(struct usb_composite_dev *,
  * @dev: Template descriptor for the device, including default device
  *	identifiers.
  * @strings: tables of strings, keyed by identifiers assigned during @bind
- *	and language IDs provided in control requests
+ *	and language IDs provided in control requests. Note: The first entries
+ *	are predefined. The first entry that may be used is
+ *	USB_GADGET_FIRST_AVAIL_IDX
  * @max_speed: Highest speed the driver supports.
  * @needs_serial: set to 1 if the gadget needs userspace to provide
  * 	a serial number.  If one is not provided, warning will be printed.
-- 
cgit v1.2.3


From 1cf0d264088907038be560ba2dd472d5e432a3dc Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:54 +0200
Subject: usb: gadget: push iSerialNumber into gadgets

This patch pushes the iSerialNumber module argument from composite into
each gadget. Once the user uses the module paramter, the string is
overwritten with the final value.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c    | 20 +++++++++++++-------
 drivers/usb/gadget/mass_storage.c | 21 +++++++++++++++++++++
 drivers/usb/gadget/printer.c      |  6 +-----
 include/linux/usb/composite.h     |  7 ++++++-
 4 files changed, 41 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 317a5ece3bd2..5642b2170541 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -40,10 +40,6 @@ static char *iProduct;
 module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, S_IRUGO);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
-
 static char composite_manufacturer[50];
 
 /*-------------------------------------------------------------------------*/
@@ -925,7 +921,7 @@ static int get_string(struct usb_composite_dev *cdev,
 	else if (cdev->product_override == id)
 		str = iProduct ?: composite->iProduct;
 	else if (cdev->serial_override == id)
-		str = iSerialNumber ?: composite->iSerialNumber;
+		str = composite->iSerialNumber;
 	else
 		str = NULL;
 	if (str) {
@@ -1411,6 +1407,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	__le16 idVendor;
 	__le16 idProduct;
 	__le16 bcdDevice;
+	u8 iSerialNumber;
 
 	/*
 	 * these variables may have been set in
@@ -1419,6 +1416,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	idVendor = new->idVendor;
 	idProduct = new->idProduct;
 	bcdDevice = new->bcdDevice;
+	iSerialNumber = new->iSerialNumber;
 
 	*new = *old;
 	if (idVendor)
@@ -1427,6 +1425,8 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 		new->idProduct = idProduct;
 	if (bcdDevice)
 		new->bcdDevice = bcdDevice;
+	if (iSerialNumber)
+		new->iSerialNumber = iSerialNumber;
 }
 
 static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
@@ -1505,8 +1505,7 @@ static int composite_bind(struct usb_gadget *gadget,
 		cdev->product_override =
 			override_id(cdev, &cdev->desc.iProduct);
 
-	if (iSerialNumber ||
-	    (!cdev->desc.iSerialNumber && composite->iSerialNumber))
+	if (composite->iSerialNumber)
 		cdev->serial_override =
 			override_id(cdev, &cdev->desc.iSerialNumber);
 
@@ -1691,6 +1690,8 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr)
 {
 	struct usb_device_descriptor	*desc = &cdev->desc;
+	struct usb_gadget_strings	*gstr = cdev->driver->strings[0];
+	struct usb_string		*dev_str = gstr->strings;
 
 	if (covr->idVendor)
 		desc->idVendor = cpu_to_le16(covr->idVendor);
@@ -1700,4 +1701,9 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 
 	if (covr->bcdDevice)
 		desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
+
+	if (covr->serial_number) {
+		desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
+		dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
+	}
 }
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 8ffbade383f2..6f5a3b232d81 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -83,6 +83,22 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language       = 0x0409,       /* en-us */
+	.strings        = strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
 
 /****************************** Configurations ******************************/
 
@@ -141,6 +157,10 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 {
 	int status;
 
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		return status;
+
 	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
 	if (status < 0)
 		return status;
@@ -160,6 +180,7 @@ static __refdata struct usb_composite_driver msg_driver = {
 	.iProduct	= DRIVER_DESC,
 	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
+	.strings	= dev_strings,
 	.bind		= msg_bind,
 };
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index f02434a10dec..3321a9df4862 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -118,8 +118,7 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static char *iSerialNum;
-module_param(iSerialNum, charp, S_IRUGO);
+module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
 
 static char *iPNPstring;
@@ -1170,9 +1169,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
 
-	if (iSerialNum)
-		strlcpy(serial_num, iSerialNum, sizeof serial_num);
-
 	if (iPNPstring)
 		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index f821a3ad475d..9d068a4be778 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -400,6 +400,7 @@ struct usb_composite_overwrite {
 	u16	idVendor;
 	u16	idProduct;
 	u16	bcdDevice;
+	char	*serial_number;
 };
 #define USB_GADGET_COMPOSITE_OPTIONS()					\
 	static struct usb_composite_overwrite coverwrite;		\
@@ -411,7 +412,11 @@ struct usb_composite_overwrite {
 	MODULE_PARM_DESC(idProduct, "USB Product ID");			\
 									\
 	module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \
-	MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)")
+	MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");	\
+									\
+	module_param_named(iSerialNumber, coverwrite.serial_number, charp, \
+			S_IRUGO); \
+	MODULE_PARM_DESC(iSerialNumber, "SerialNumber string")
 
 void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr);
-- 
cgit v1.2.3


From 03de9bf69c589b71c43aa52b838690cb477903c9 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:55 +0200
Subject: usb: gadget: push iManufacturer into gadgets

This patch pushes the iManufacturer module argument from composite into
each gadget. Once the user uses the module paramter, the string is
overwritten with the final value.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 20 +++++++++++---------
 include/linux/usb/composite.h  |  7 ++++++-
 2 files changed, 17 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5642b2170541..482cf8cf301d 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -32,10 +32,6 @@
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
 static char *iProduct;
 module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
@@ -916,8 +912,7 @@ static int get_string(struct usb_composite_dev *cdev,
 	 * check if the string has not been overridden.
 	 */
 	if (cdev->manufacturer_override == id)
-		str = iManufacturer ?: composite->iManufacturer ?:
-			composite_manufacturer;
+		str = composite->iManufacturer ?: composite_manufacturer;
 	else if (cdev->product_override == id)
 		str = iProduct ?: composite->iProduct;
 	else if (cdev->serial_override == id)
@@ -1408,6 +1403,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	__le16 idProduct;
 	__le16 bcdDevice;
 	u8 iSerialNumber;
+	u8 iManufacturer;
 
 	/*
 	 * these variables may have been set in
@@ -1417,6 +1413,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	idProduct = new->idProduct;
 	bcdDevice = new->bcdDevice;
 	iSerialNumber = new->iSerialNumber;
+	iManufacturer = new->iManufacturer;
 
 	*new = *old;
 	if (idVendor)
@@ -1427,6 +1424,8 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 		new->bcdDevice = bcdDevice;
 	if (iSerialNumber)
 		new->iSerialNumber = iSerialNumber;
+	if (iManufacturer)
+		new->iManufacturer = iManufacturer;
 }
 
 static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
@@ -1487,9 +1486,8 @@ static int composite_bind(struct usb_gadget *gadget,
 	update_unchanged_dev_desc(&cdev->desc, composite->dev);
 
 	/* string overrides */
-	if (iManufacturer || !cdev->desc.iManufacturer) {
-		if (!iManufacturer && !composite->iManufacturer &&
-		    !*composite_manufacturer)
+	if (!cdev->desc.iManufacturer) {
+		if (!composite->iManufacturer)
 			snprintf(composite_manufacturer,
 				 sizeof composite_manufacturer,
 				 "%s %s with %s",
@@ -1706,4 +1704,8 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
 		dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
 	}
+	if (covr->manufacturer) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
+	}
 }
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 9d068a4be778..86553c8c3e8b 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -401,6 +401,7 @@ struct usb_composite_overwrite {
 	u16	idProduct;
 	u16	bcdDevice;
 	char	*serial_number;
+	char	*manufacturer;
 };
 #define USB_GADGET_COMPOSITE_OPTIONS()					\
 	static struct usb_composite_overwrite coverwrite;		\
@@ -416,7 +417,11 @@ struct usb_composite_overwrite {
 									\
 	module_param_named(iSerialNumber, coverwrite.serial_number, charp, \
 			S_IRUGO); \
-	MODULE_PARM_DESC(iSerialNumber, "SerialNumber string")
+	MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");		\
+									\
+	module_param_named(iManufacturer, coverwrite.manufacturer, charp, \
+			S_IRUGO); \
+	MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string")
 
 void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr);
-- 
cgit v1.2.3


From 2d35ee47aaafac152bc4bc5020660ffa1753ab02 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:56 +0200
Subject: usb: gadget: push iProduct into gadgets

This patch pushes the iProduct module argument from composite
into each gadget.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 21 +++++++++++----------
 include/linux/usb/composite.h  |  6 +++++-
 2 files changed, 16 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 482cf8cf301d..47b9130968bc 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -28,14 +28,6 @@
  * with the relevant device-wide data.
  */
 
-/* Some systems will need runtime overrides for the  product identifiers
- * published in the device descriptor, either numbers or strings or both.
- * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
 static char composite_manufacturer[50];
 
 /*-------------------------------------------------------------------------*/
@@ -914,7 +906,7 @@ static int get_string(struct usb_composite_dev *cdev,
 	if (cdev->manufacturer_override == id)
 		str = composite->iManufacturer ?: composite_manufacturer;
 	else if (cdev->product_override == id)
-		str = iProduct ?: composite->iProduct;
+		str = composite->iProduct;
 	else if (cdev->serial_override == id)
 		str = composite->iSerialNumber;
 	else
@@ -1404,6 +1396,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	__le16 bcdDevice;
 	u8 iSerialNumber;
 	u8 iManufacturer;
+	u8 iProduct;
 
 	/*
 	 * these variables may have been set in
@@ -1414,6 +1407,7 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 	bcdDevice = new->bcdDevice;
 	iSerialNumber = new->iSerialNumber;
 	iManufacturer = new->iManufacturer;
+	iProduct = new->iProduct;
 
 	*new = *old;
 	if (idVendor)
@@ -1426,6 +1420,8 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 		new->iSerialNumber = iSerialNumber;
 	if (iManufacturer)
 		new->iManufacturer = iManufacturer;
+	if (iProduct)
+		new->iProduct = iProduct;
 }
 
 static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
@@ -1499,7 +1495,7 @@ static int composite_bind(struct usb_gadget *gadget,
 			override_id(cdev, &cdev->desc.iManufacturer);
 	}
 
-	if (iProduct || (!cdev->desc.iProduct && composite->iProduct))
+	if (!cdev->desc.iProduct && composite->iProduct)
 		cdev->product_override =
 			override_id(cdev, &cdev->desc.iProduct);
 
@@ -1708,4 +1704,9 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
 		dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
 	}
+
+	if (covr->product) {
+		desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id;
+		dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
+	}
 }
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 86553c8c3e8b..5cd110ec0a23 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -402,6 +402,7 @@ struct usb_composite_overwrite {
 	u16	bcdDevice;
 	char	*serial_number;
 	char	*manufacturer;
+	char	*product;
 };
 #define USB_GADGET_COMPOSITE_OPTIONS()					\
 	static struct usb_composite_overwrite coverwrite;		\
@@ -421,7 +422,10 @@ struct usb_composite_overwrite {
 									\
 	module_param_named(iManufacturer, coverwrite.manufacturer, charp, \
 			S_IRUGO); \
-	MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string")
+	MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");	\
+									\
+	module_param_named(iProduct, coverwrite.product, charp, S_IRUGO); \
+	MODULE_PARM_DESC(iProduct, "USB Product string")
 
 void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr);
-- 
cgit v1.2.3


From d33f74fce3756d51a0203cec3d0d278e3b48d827 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:57 +0200
Subject: usb: gadget: remove string override from struct usb_composite_driver

The struct usb_composite_driver members iProduct, iSerial and
iManufacturer can be entered directly via the string array. There is no
need for them to appear here.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c    | 29 +++++++----------------------
 drivers/usb/gadget/g_ffs.c        |  4 ++--
 drivers/usb/gadget/mass_storage.c |  4 ++--
 drivers/usb/gadget/multi.c        |  4 ++--
 include/linux/usb/composite.h     | 12 ------------
 5 files changed, 13 insertions(+), 40 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 47b9130968bc..f3689e1bf4b2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -904,11 +904,7 @@ static int get_string(struct usb_composite_dev *cdev,
 	 * check if the string has not been overridden.
 	 */
 	if (cdev->manufacturer_override == id)
-		str = composite->iManufacturer ?: composite_manufacturer;
-	else if (cdev->product_override == id)
-		str = composite->iProduct;
-	else if (cdev->serial_override == id)
-		str = composite->iSerialNumber;
+		str = composite_manufacturer;
 	else
 		str = NULL;
 	if (str) {
@@ -1483,26 +1479,17 @@ static int composite_bind(struct usb_gadget *gadget,
 
 	/* string overrides */
 	if (!cdev->desc.iManufacturer) {
-		if (!composite->iManufacturer)
-			snprintf(composite_manufacturer,
-				 sizeof composite_manufacturer,
-				 "%s %s with %s",
-				 init_utsname()->sysname,
-				 init_utsname()->release,
-				 gadget->name);
+		snprintf(composite_manufacturer,
+				sizeof composite_manufacturer,
+				"%s %s with %s",
+				init_utsname()->sysname,
+				init_utsname()->release,
+				gadget->name);
 
 		cdev->manufacturer_override =
 			override_id(cdev, &cdev->desc.iManufacturer);
 	}
 
-	if (!cdev->desc.iProduct && composite->iProduct)
-		cdev->product_override =
-			override_id(cdev, &cdev->desc.iProduct);
-
-	if (composite->iSerialNumber)
-		cdev->serial_override =
-			override_id(cdev, &cdev->desc.iSerialNumber);
-
 	/* has userspace failed to provide a serial number? */
 	if (composite->needs_serial && !cdev->desc.iSerialNumber)
 		WARNING(cdev, "userspace failed to provide iSerialNumber\n");
@@ -1619,8 +1606,6 @@ int usb_composite_probe(struct usb_composite_driver *driver)
 
 	if (!driver->name)
 		driver->name = "composite";
-	if (!driver->iProduct)
-		driver->iProduct = driver->name;
 
 	driver->gadget_driver = composite_driver_template;
 	gadget_driver = &driver->gadget_driver;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 16d18873ebeb..eaaed199e453 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -117,7 +117,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 /* String IDs are assigned dynamically */
 static struct usb_string gfs_strings[] = {
 	[USB_GADGET_MANUFACTURER_IDX].s = "",
-	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{ .s = "FunctionFS + RNDIS" },
@@ -172,7 +172,6 @@ static __refdata struct usb_composite_driver gfs_driver = {
 	.max_speed	= USB_SPEED_HIGH,
 	.bind		= gfs_bind,
 	.unbind		= gfs_unbind,
-	.iProduct	= DRIVER_DESC,
 };
 
 static DEFINE_MUTEX(gfs_lock);
@@ -360,6 +359,7 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	ret = usb_string_ids_tab(cdev, gfs_strings);
 	if (unlikely(ret < 0))
 		goto error;
+	gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
 
 	for (i = func_num; --i; ) {
 		ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 6f5a3b232d81..50da3c88cb06 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -85,7 +85,7 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 static struct usb_string strings_dev[] = {
 	[USB_GADGET_MANUFACTURER_IDX].s = "",
-	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
@@ -160,6 +160,7 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
+	msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
 	if (status < 0)
@@ -177,7 +178,6 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 static __refdata struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
-	.iProduct	= DRIVER_DESC,
 	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
 	.strings	= dev_strings,
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 94b35e5539d7..c158706b5ab0 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -115,7 +115,7 @@ enum {
 
 static struct usb_string strings_dev[] = {
 	[USB_GADGET_MANUFACTURER_IDX].s = "",
-	[USB_GADGET_PRODUCT_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
 	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
@@ -293,6 +293,7 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (unlikely(status < 0))
 		goto fail2;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register configurations */
 	status = rndis_config_register(cdev);
@@ -338,7 +339,6 @@ static __refdata struct usb_composite_driver multi_driver = {
 	.max_speed	= USB_SPEED_HIGH,
 	.bind		= multi_bind,
 	.unbind		= __exit_p(multi_unbind),
-	.iProduct	= DRIVER_DESC,
 	.needs_serial	= 1,
 };
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 5cd110ec0a23..60f8815998bd 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -259,13 +259,6 @@ enum {
 /**
  * struct usb_composite_driver - groups configurations into a gadget
  * @name: For diagnostics, identifies the driver.
- * @iProduct: Used as iProduct override if @dev->iProduct is not set.
- *	If NULL value of @name is taken.
- * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
- *	not set. If NULL a default "<system> <release> with <udc>" value
- *	will be used.
- * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is
- *	not set.
  * @dev: Template descriptor for the device, including default device
  *	identifiers.
  * @strings: tables of strings, keyed by identifiers assigned during @bind
@@ -300,9 +293,6 @@ enum {
  */
 struct usb_composite_driver {
 	const char				*name;
-	const char				*iProduct;
-	const char				*iManufacturer;
-	const char				*iSerialNumber;
 	const struct usb_device_descriptor	*dev;
 	struct usb_gadget_strings		**strings;
 	enum usb_device_speed			max_speed;
@@ -369,8 +359,6 @@ struct usb_composite_dev {
 	struct usb_composite_driver	*driver;
 	u8				next_string_id;
 	u8				manufacturer_override;
-	u8				product_override;
-	u8				serial_override;
 
 	/* the gadget driver won't enable the data pullup
 	 * while the deactivation count is nonzero.
-- 
cgit v1.2.3


From cc2683c318a5bf192b75cd5c343b51009db0cf6c Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 15:01:58 +0200
Subject: usb: gadget: Provide a default implementation of default manufacturer
 string

Some gadgets provide custom entry here. Some may override it with an
etntry that is also created by composite if there was no value sumbitted
at all.
This patch removes all "custom manufacturer" strings which are the same
as these which are created by composite. Then it moves the creation of
the default manufacturer string to usb_composite_overwrite_options() in
case no command line argument has been used and the entry is still an
empty string.
By doing this we get rid of the global variable "composite_manufacturer"
in composite.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/acm_ms.c         | 12 +------
 drivers/usb/gadget/audio.c          |  9 +----
 drivers/usb/gadget/cdc2.c           | 10 +-----
 drivers/usb/gadget/composite.c      | 67 ++++++++++++-------------------------
 drivers/usb/gadget/ether.c          | 12 +------
 drivers/usb/gadget/f_hid.c          |  1 -
 drivers/usb/gadget/f_mass_storage.c |  1 -
 drivers/usb/gadget/f_midi.c         |  1 -
 drivers/usb/gadget/g_ffs.c          |  1 -
 drivers/usb/gadget/gmidi.c          |  1 -
 drivers/usb/gadget/hid.c            | 10 +-----
 drivers/usb/gadget/mass_storage.c   |  2 --
 drivers/usb/gadget/multi.c          |  2 --
 drivers/usb/gadget/ncm.c            | 12 +------
 drivers/usb/gadget/nokia.c          |  1 -
 drivers/usb/gadget/printer.c        |  8 +----
 drivers/usb/gadget/serial.c         |  9 +----
 drivers/usb/gadget/zero.c           |  9 +----
 include/linux/usb/composite.h       |  2 +-
 19 files changed, 32 insertions(+), 138 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 35db6aa57281..d280f164887c 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 
 #include "u_serial.h"
 
@@ -87,13 +86,9 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
 /* string IDs are assigned dynamically */
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -186,11 +181,6 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 	 * Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
-
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 8857b6eeb6a2..1f81e0f4fab9 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -12,7 +12,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
@@ -33,10 +32,8 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -161,10 +158,6 @@ static int __init audio_bind(struct usb_composite_dev *cdev)
 			__constant_cpu_to_le16(0x0300 | 0x0099);
 	}
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		cdev->gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 8966bdec1534..4e2060bf35e3 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 
 #include "u_ether.h"
@@ -90,10 +89,8 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -182,15 +179,10 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 			cpu_to_le16(0x0300 | 0x0099);
 	}
 
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f3689e1bf4b2..c7066cd4c95a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -28,9 +28,6 @@
  * with the relevant device-wide data.
  */
 
-static char composite_manufacturer[50];
-
-/*-------------------------------------------------------------------------*/
 /**
  * next_ep_desc() - advance to the next EP descriptor
  * @t: currect pointer within descriptor array
@@ -860,7 +857,6 @@ static int get_string(struct usb_composite_dev *cdev,
 	struct usb_configuration	*c;
 	struct usb_function		*f;
 	int				len;
-	const char			*str;
 
 	/* Yes, not only is USB's I18N support probably more than most
 	 * folk will ever care about ... also, it's all supported here.
@@ -900,21 +896,6 @@ static int get_string(struct usb_composite_dev *cdev,
 		return s->bLength;
 	}
 
-	/* Otherwise, look up and return a specified string.  First
-	 * check if the string has not been overridden.
-	 */
-	if (cdev->manufacturer_override == id)
-		str = composite_manufacturer;
-	else
-		str = NULL;
-	if (str) {
-		struct usb_gadget_strings strings = {
-			.language = language,
-			.strings  = &(struct usb_string) { 0xff, str }
-		};
-		return usb_gadget_get_string(&strings, 0xff, buf);
-	}
-
 	/* String IDs are device-scoped, so we look up each string
 	 * table we're told about.  These lookups are infrequent;
 	 * simpler-is-better here.
@@ -1367,23 +1348,11 @@ composite_unbind(struct usb_gadget *gadget)
 		usb_ep_free_request(gadget->ep0, cdev->req);
 	}
 	device_remove_file(&gadget->dev, &dev_attr_suspended);
+	kfree(cdev->def_manufacturer);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
 }
 
-static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
-{
-	if (!*desc) {
-		int ret = usb_string_id(cdev);
-		if (unlikely(ret < 0))
-			WARNING(cdev, "failed to override string ID\n");
-		else
-			*desc = ret;
-	}
-
-	return *desc;
-}
-
 static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 		const struct usb_device_descriptor *old)
 {
@@ -1477,19 +1446,6 @@ static int composite_bind(struct usb_gadget *gadget,
 
 	update_unchanged_dev_desc(&cdev->desc, composite->dev);
 
-	/* string overrides */
-	if (!cdev->desc.iManufacturer) {
-		snprintf(composite_manufacturer,
-				sizeof composite_manufacturer,
-				"%s %s with %s",
-				init_utsname()->sysname,
-				init_utsname()->release,
-				gadget->name);
-
-		cdev->manufacturer_override =
-			override_id(cdev, &cdev->desc.iManufacturer);
-	}
-
 	/* has userspace failed to provide a serial number? */
 	if (composite->needs_serial && !cdev->desc.iSerialNumber)
 		WARNING(cdev, "userspace failed to provide iSerialNumber\n");
@@ -1665,6 +1621,22 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev)
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
 
+static char *composite_default_mfr(struct usb_gadget *gadget)
+{
+	char *mfr;
+	int len;
+
+	len = snprintf(NULL, 0, "%s %s with %s", init_utsname()->sysname,
+			init_utsname()->release, gadget->name);
+	len++;
+	mfr = kmalloc(len, GFP_KERNEL);
+	if (!mfr)
+		return NULL;
+	snprintf(mfr, len, "%s %s with %s", init_utsname()->sysname,
+			init_utsname()->release, gadget->name);
+	return mfr;
+}
+
 void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr)
 {
@@ -1688,6 +1660,11 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 	if (covr->manufacturer) {
 		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
 		dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
+
+	} else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		cdev->def_manufacturer = composite_default_mfr(cdev->gadget);
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer;
 	}
 
 	if (covr->product) {
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index dd5e00d207fe..a5c272067625 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -14,8 +14,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
-
 
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
@@ -193,11 +191,8 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-/* string IDs are assigned dynamically */
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -333,15 +328,10 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 			cpu_to_le16(0x0300 | 0x0099);
 	}
 
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 16a8b1c15c62..77dbca099bcb 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 #include <linux/hid.h>
 #include <linux/cdev.h>
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4f1142efa6d1..11150960d88b 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -213,7 +213,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/freezer.h>
-#include <linux/utsname.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 2f7e8f2930cc..8ed1259fe80d 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -21,7 +21,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include <sound/core.h>
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index eaaed199e453..9e62c20fb5bc 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -13,7 +13,6 @@
 #define pr_fmt(fmt) "g_ffs: " fmt
 
 #include <linux/module.h>
-#include <linux/utsname.h>
 
 /*
  * kbuild is not very cooperative with respect to linking separately
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 2ee3a74056c9..59621ef7657d 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -22,7 +22,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 #include <linux/device.h>
 
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 16caf50e916d..0e2e357cc59e 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -91,10 +91,8 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -165,16 +163,10 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	else
 		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
 
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 50da3c88cb06..9eb2be685803 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -29,10 +29,8 @@
 
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/usb/ch9.h>
 
-
 /*-------------------------------------------------------------------------*/
 
 #define DRIVER_DESC		"Mass Storage Gadget"
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index c158706b5ab0..5bc5d96beaac 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -14,10 +14,8 @@
 
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 
-
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 1a26452ce4ca..343f3d364ef8 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -20,8 +20,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
-
 
 #include "u_ether.h"
 
@@ -95,12 +93,9 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
 /* string IDs are assigned dynamically */
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
@@ -169,15 +164,10 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 			cpu_to_le16(0x0300 | 0x0099);
 	}
 
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 34b97f12b7da..465766e41442 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "u_serial.h"
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 3321a9df4862..9bd994203d3d 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -22,7 +22,6 @@
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/moduleparam.h>
 #include <linux/fs.h>
@@ -237,7 +236,6 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 /* descriptors that are built on-demand */
 
-static char				manufacturer [50];
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
 static char				pnp_string [1024] =
@@ -245,7 +243,7 @@ static char				pnp_string [1024] =
 
 /* static strings, in UTF-8 */
 static struct usb_string		strings [] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = product_desc,
 	[USB_GADGET_SERIAL_IDX].s =	serial_num,
 	{  }		/* end of list */
@@ -1165,10 +1163,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		device_desc.bcdDevice =
 			cpu_to_le16(0xFFFF);
 	}
-	snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-
 	if (iPNPstring)
 		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 768a38e896f7..bf12d55cd07b 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -61,10 +60,8 @@ USB_GADGET_COMPOSITE_OPTIONS();
 
 #define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME,
 	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
@@ -171,10 +168,6 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device description: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index ee769c45498b..a837f3af2047 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -42,7 +42,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "g_zero.h"
@@ -139,13 +138,11 @@ const struct usb_descriptor_header *otg_desc[] = {
 #endif
 
 /* string IDs are assigned dynamically */
-static char manufacturer[50];
-
 /* default serial number takes at least two packets */
 static char serial[] = "0123456789.0123456789.0123456789";
 
 static struct usb_string strings_dev[] = {
-	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
 	[USB_GADGET_PRODUCT_IDX].s = longname,
 	[USB_GADGET_SERIAL_IDX].s = serial,
 	{  }			/* end of list */
@@ -305,10 +302,6 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 
 	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
 
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-
 	return 0;
 }
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 60f8815998bd..65ae0a3feb5b 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -358,7 +358,7 @@ struct usb_composite_dev {
 	struct list_head		configs;
 	struct usb_composite_driver	*driver;
 	u8				next_string_id;
-	u8				manufacturer_override;
+	char				*def_manufacturer;
 
 	/* the gadget driver won't enable the data pullup
 	 * while the deactivation count is nonzero.
-- 
cgit v1.2.3


From 721e2e91945bc2520d57d795dfe1b502ecec567c Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:27 +0200
Subject: usb: gadget: libcomposite: move composite.c into libcomposite

This moves composite.c into libcomposite and updates all gadgets.
Finally!

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Makefile         |  3 ++-
 drivers/usb/gadget/acm_ms.c         |  2 +-
 drivers/usb/gadget/audio.c          | 11 +----------
 drivers/usb/gadget/cdc2.c           |  1 -
 drivers/usb/gadget/composite.c      | 14 +++++++++++++-
 drivers/usb/gadget/ether.c          |  2 --
 drivers/usb/gadget/f_hid.c          |  1 +
 drivers/usb/gadget/g_ffs.c          |  3 ---
 drivers/usb/gadget/gmidi.c          |  2 +-
 drivers/usb/gadget/hid.c            |  5 ++---
 drivers/usb/gadget/mass_storage.c   |  3 +--
 drivers/usb/gadget/multi.c          |  3 ---
 drivers/usb/gadget/ncm.c            |  4 ++--
 drivers/usb/gadget/nokia.c          |  2 --
 drivers/usb/gadget/printer.c        | 12 +-----------
 drivers/usb/gadget/serial.c         |  2 --
 drivers/usb/gadget/tcm_usb_gadget.c |  2 --
 drivers/usb/gadget/webcam.c         |  2 --
 drivers/usb/gadget/zero.c           |  2 --
 19 files changed, 25 insertions(+), 51 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 4fec0e8ee000..5c4a1330b498 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,7 +5,8 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
-libcomposite-y			:= usbstring.o config.o epautoconf.o gadget_chips.o
+libcomposite-y			:= usbstring.o config.o epautoconf.o
+libcomposite-y			+= gadget_chips.o composite.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index d280f164887c..b0abc2518b38 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include "u_serial.h"
 
@@ -40,7 +41,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 
-#include "composite.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_mass_storage.c"
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 1f81e0f4fab9..1b9dee91d686 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -12,22 +12,13 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
 #define DRIVER_DESC		"Linux USB Audio Gadget"
 #define DRIVER_VERSION		"Feb 2, 2012"
 
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "composite.c"
 USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 4e2060bf35e3..ba38d2a43723 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -43,7 +43,6 @@ USB_GADGET_COMPOSITE_OPTIONS();
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 
-#include "composite.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_ecm.c"
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c7066cd4c95a..27ac36638827 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -154,6 +154,7 @@ ep_found:
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(config_ep_by_speed);
 
 /**
  * usb_add_function() - add a function to a configuration
@@ -212,6 +213,7 @@ done:
 				function->name, function, value);
 	return value;
 }
+EXPORT_SYMBOL_GPL(usb_add_function);
 
 /**
  * usb_function_deactivate - prevent function and gadget enumeration
@@ -248,6 +250,7 @@ int usb_function_deactivate(struct usb_function *function)
 	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_function_deactivate);
 
 /**
  * usb_function_activate - allow function and gadget enumeration
@@ -278,6 +281,7 @@ int usb_function_activate(struct usb_function *function)
 	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_function_activate);
 
 /**
  * usb_interface_id() - allocate an unused interface ID
@@ -314,6 +318,7 @@ int usb_interface_id(struct usb_configuration *config,
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(usb_interface_id);
 
 static int config_buf(struct usb_configuration *config,
 		enum usb_device_speed speed, void *buf, u8 type)
@@ -754,6 +759,7 @@ done:
 				config->bConfigurationValue, status);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_add_config);
 
 static void remove_config(struct usb_composite_dev *cdev,
 			      struct usb_configuration *config)
@@ -947,6 +953,7 @@ int usb_string_id(struct usb_composite_dev *cdev)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(usb_string_id);
 
 /**
  * usb_string_ids() - allocate unused string IDs in batch
@@ -978,6 +985,7 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_string_ids_tab);
 
 /**
  * usb_string_ids_n() - allocate unused string IDs in batch
@@ -1006,7 +1014,7 @@ int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
 	c->next_string_id += n;
 	return next + 1;
 }
-
+EXPORT_SYMBOL_GPL(usb_string_ids_n);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1572,6 +1580,7 @@ int usb_composite_probe(struct usb_composite_driver *driver)
 
 	return usb_gadget_probe_driver(gadget_driver);
 }
+EXPORT_SYMBOL_GPL(usb_composite_probe);
 
 /**
  * usb_composite_unregister() - unregister a composite driver
@@ -1584,6 +1593,7 @@ void usb_composite_unregister(struct usb_composite_driver *driver)
 {
 	usb_gadget_unregister_driver(&driver->gadget_driver);
 }
+EXPORT_SYMBOL_GPL(usb_composite_unregister);
 
 /**
  * usb_composite_setup_continue() - Continue with the control transfer
@@ -1620,6 +1630,7 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev)
 
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_composite_setup_continue);
 
 static char *composite_default_mfr(struct usb_gadget *gadget)
 {
@@ -1672,3 +1683,4 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
 	}
 }
+EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index a5c272067625..d7ec87e0bfcb 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -100,8 +100,6 @@ static inline bool has_rndis(void)
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "f_ecm.c"
 #include "f_subset.c"
 #ifdef	USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 77dbca099bcb..511e527178e2 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -17,6 +17,7 @@
 #include <linux/poll.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
+#include <linux/sched.h>
 #include <linux/usb/g_hid.h>
 
 static int major, minors;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 9e62c20fb5bc..3953dd4d7186 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -21,9 +21,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
 #  if defined USB_ETH_RNDIS
 #    undef USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 59621ef7657d..4181524d1c4b 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -30,13 +30,13 @@
 #include <sound/rawmidi.h>
 
 #include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/audio.h>
 #include <linux/usb/midi.h>
 
 #include "gadget_chips.h"
 
-#include "composite.c"
 #include "f_midi.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 0e2e357cc59e..5fa1bfa8c6c6 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -15,6 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
 #define DRIVER_DESC		"HID Gadget"
@@ -34,9 +36,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-
 #include "f_hid.c"
 
 
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 9eb2be685803..080e577773d5 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -30,6 +30,7 @@
 
 #include <linux/kernel.h>
 #include <linux/usb/ch9.h>
+#include <linux/module.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -45,8 +46,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 5bc5d96beaac..9d2e75c017dc 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -40,9 +40,6 @@ MODULE_LICENSE("GPL");
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-
 #include "f_mass_storage.c"
 
 #include "u_serial.c"
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 343f3d364ef8..b21ec269b8f5 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -20,6 +20,8 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
 
 #include "u_ether.h"
 
@@ -34,8 +36,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "f_ncm.c"
 #include "u_ether.c"
 
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 465766e41442..ad0cc3473073 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -37,8 +37,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_ecm.c"
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 9bd994203d3d..e394050afd02 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -37,22 +37,12 @@
 #include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/g_printer.h>
 
 #include "gadget_chips.h"
 
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "composite.c"
-
-/*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index bf12d55cd07b..f17d4626af55 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -36,8 +36,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "f_acm.c"
 #include "f_obex.c"
 #include "f_serial.c"
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index b56d57d59796..eaa1005377fc 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -25,8 +25,6 @@
 #include <target/configfs_macros.h>
 #include <asm/unaligned.h>
 
-#include "composite.c"
-
 #include "tcm_usb_gadget.h"
 
 USB_GADGET_COMPOSITE_OPTIONS();
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 03591194b17a..69cf5c2cd335 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -23,8 +23,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "uvc_queue.c"
 #include "uvc_video.c"
 #include "uvc_v4l2.c"
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index a837f3af2047..0dabffa5f493 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -57,8 +57,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-
 #include "f_sourcesink.c"
 #include "f_loopback.c"
 
-- 
cgit v1.2.3


From d80c304bcacaf340efa29364ed0107f5c30378c8 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Thu, 6 Sep 2012 20:11:28 +0200
Subject: usb: gadget: libcomposite: move MODULE_VERSION to composite.c

MODULE_VERSION and AUTHOR looks better in composite.c than in
usbstrings.c so I move it there.
I put David Brownell as the module Author as I belive he wrote most of
it.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/composite.c | 3 +++
 drivers/usb/gadget/usbstring.c | 1 -
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 27ac36638827..cacb273ba708 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1684,3 +1684,6 @@ void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 	}
 }
 EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 24e9bbd255a7..1f49fce0f0b7 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -70,4 +70,3 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
 	return buf [0];
 }
 EXPORT_SYMBOL_GPL(usb_gadget_get_string);
-MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 162ca3ca613e02e115ec9c5273f94bd22dad0af2 Mon Sep 17 00:00:00 2001
From: Wei Yongjun
Date: Fri, 7 Sep 2012 14:54:25 +0800
Subject: usb: gadget: at91_udc: move the dereference below the NULL test

The dereference should be moved below the NULL test.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/at91_udc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index c9e66dfb02e6..d95f6b079345 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -469,7 +469,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
-	struct at91_udc	*udc = ep->udc;
+	struct at91_udc *udc;
 	u16		maxpacket;
 	u32		tmp;
 	unsigned long	flags;
@@ -484,6 +484,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
+	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("bogus device state\n");
 		return -ESHUTDOWN;
-- 
cgit v1.2.3


From 9c6d196d5aa35e07482f23c3e37755e7a82140e0 Mon Sep 17 00:00:00 2001
From: Fabio Porcedda
Date: Fri, 7 Sep 2012 15:27:42 +0200
Subject: usb: gadget: at91_udc: fix dt support

Don't fail the initialization check for the platform_data
if there is avaiable an associated device tree node.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/at91_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index d95f6b079345..af931282843d 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1704,7 +1704,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 	int		retval;
 	struct resource	*res;
 
-	if (!dev->platform_data) {
+	if (!dev->platform_data && !pdev->dev.of_node) {
 		/* small (so we copy it) but critical! */
 		DBG("missing platform_data\n");
 		return -ENODEV;
-- 
cgit v1.2.3


From ed9cbda63d45638b69ce62412e3a3c7b00644835 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 09:16:07 +0200
Subject: usb: gadget: remove usb_gadget_controller_number()

The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.

There are some driver in tree (on the host side) which use the bcdDevice
field to figure out special workarounds for a given firmware revision.
This seems to make sense. Therefore this patch converts all gadgets
(except a few) to use the kernel version instead a random 2 or 3 plus
the UDC number. The few that don't report kernel's version are:
- webcam
  This one reports always a version 0x10 so allow it to do so in future.
- nokia
  This one reports always 0x211. The comment says that this gadget works
  only if the UDC supports altsettings so I added a check for this.
- serial
  This one reports 0x2400 + UDC number. Since the gadget version is 2.4
  this could make sense. Therefore bcdDevice is 0x2400 here.

I also remove various gadget_is_<name> macros which are unused. The
remaining few macros should be moved to feature / bug bitfield.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/Makefile         |  2 +-
 drivers/usb/gadget/acm_ms.c         | 13 -----
 drivers/usb/gadget/audio.c          | 12 -----
 drivers/usb/gadget/cdc2.c           | 16 -------
 drivers/usb/gadget/composite.c      |  2 +
 drivers/usb/gadget/ether.c          | 17 -------
 drivers/usb/gadget/f_mass_storage.c | 15 +-----
 drivers/usb/gadget/file_storage.c   | 14 ++----
 drivers/usb/gadget/gadget_chips.c   | 94 -------------------------------------
 drivers/usb/gadget/gadget_chips.h   | 23 ---------
 drivers/usb/gadget/gmidi.c          | 16 +------
 drivers/usb/gadget/hid.c            |  8 +---
 drivers/usb/gadget/multi.c          | 11 +----
 drivers/usb/gadget/ncm.c            | 17 -------
 drivers/usb/gadget/nokia.c          | 14 +-----
 drivers/usb/gadget/printer.c        | 11 -----
 drivers/usb/gadget/serial.c         | 22 +--------
 drivers/usb/gadget/zero.c           | 17 -------
 include/linux/usb/composite.h       | 11 +++++
 19 files changed, 24 insertions(+), 311 deletions(-)
 delete mode 100644 drivers/usb/gadget/gadget_chips.c

(limited to 'drivers')

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 5c4a1330b498..307be5fa824c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -6,7 +6,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
 libcomposite-y			:= usbstring.o config.o epautoconf.o
-libcomposite-y			+= gadget_chips.o composite.o
+libcomposite-y			+= composite.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index b0abc2518b38..5a7f289805ff 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -148,7 +148,6 @@ static struct usb_configuration acm_ms_config_driver = {
 
 static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 	void			*retp;
@@ -165,18 +164,6 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 		goto fail0;
 	}
 
-	/* set bcdDevice */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	} else {
-		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				acm_ms_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/*
 	 * Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 1b9dee91d686..231b0efe8fdc 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -135,20 +135,8 @@ static struct usb_configuration audio_config_driver = {
 
 static int __init audio_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	int			status;
 
-	gcnum = usb_gadget_controller_number(cdev->gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		ERROR(cdev, "controller '%s' not recognized; trying %s\n",
-			cdev->gadget->name,
-			audio_config_driver.label);
-		device_desc.bcdDevice =
-			__constant_cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index ba38d2a43723..1e4bb77f00bb 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -143,7 +143,6 @@ static struct usb_configuration cdc_config_driver = {
 
 static int __init cdc_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -163,21 +162,6 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail0;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				cdc_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index cacb273ba708..957f973dd96a 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1389,6 +1389,8 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
 		new->idProduct = idProduct;
 	if (bcdDevice)
 		new->bcdDevice = bcdDevice;
+	else
+		new->bcdDevice = cpu_to_le16(get_default_bcdDevice());
 	if (iSerialNumber)
 		new->iSerialNumber = iSerialNumber;
 	if (iManufacturer)
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d7ec87e0bfcb..18c3f423706e 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -275,7 +275,6 @@ static struct usb_configuration eth_config_driver = {
 
 static int __init eth_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -310,22 +309,6 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		device_desc.bNumConfigurations = 2;
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		dev_warn(&gadget->dev,
-				"controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				eth_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 11150960d88b..3a7668bde3ef 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -348,7 +348,6 @@ struct fsg_config {
 
 	const char *vendor_name;		/*  8 characters or less */
 	const char *product_name;		/* 16 characters or less */
-	u16 release;
 
 	char			can_stall;
 };
@@ -2772,18 +2771,7 @@ buffhds_first_it:
 	bh->next = common->buffhds;
 
 	/* Prepare inquiryString */
-	if (cfg->release != 0xffff) {
-		i = cfg->release;
-	} else {
-		i = usb_gadget_controller_number(gadget);
-		if (i >= 0) {
-			i = 0x0300 + i;
-		} else {
-			WARNING(common, "controller '%s' not recognized\n",
-				gadget->name);
-			i = 0x0399;
-		}
-	}
+	i = get_default_bcdDevice();
 	snprintf(common->inquiry_string, sizeof common->inquiry_string,
 		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
 		 /* Assume product name dependent on the first LUN */
@@ -3109,7 +3097,6 @@ fsg_config_from_params(struct fsg_config *cfg,
 	/* Let MSF use defaults */
 	cfg->vendor_name = 0;
 	cfg->product_name = 0;
-	cfg->release = 0xffff;
 
 	cfg->ops = NULL;
 	cfg->private_data = NULL;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index ce362f7e39d3..3f7d640b6758 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -251,6 +251,7 @@
 #include <linux/freezer.h>
 #include <linux/utsname.h>
 
+#include <linux/usb/composite.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -3198,7 +3199,6 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 static int __init check_parameters(struct fsg_dev *fsg)
 {
 	int	prot;
-	int	gcnum;
 
 	/* Store the default values */
 	mod_data.transport_type = USB_PR_BULK;
@@ -3213,16 +3213,8 @@ static int __init check_parameters(struct fsg_dev *fsg)
 	if (gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
-	if (mod_data.release == 0xffff) {	// Parameter wasn't set
-		gcnum = usb_gadget_controller_number(fsg->gadget);
-		if (gcnum >= 0)
-			mod_data.release = 0x0300 + gcnum;
-		else {
-			WARNING(fsg, "controller '%s' not recognized\n",
-				fsg->gadget->name);
-			mod_data.release = 0x0399;
-		}
-	}
+	if (mod_data.release == 0xffff)
+		mod_data.release = get_default_bcdDevice();
 
 	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
 
diff --git a/drivers/usb/gadget/gadget_chips.c b/drivers/usb/gadget/gadget_chips.c
deleted file mode 100644
index 6387d43d3f8c..000000000000
--- a/drivers/usb/gadget/gadget_chips.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * USB device controllers have lots of quirks.  Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE:  some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- */
-
-#include <linux/usb/gadget.h>
-#include <linux/module.h>
-
-#include "gadget_chips.h"
-
-/**
- * usb_gadget_controller_number - support bcdDevice id convention
- * @gadget: the controller being driven
- *
- * Return a 2-digit BCD value associated with the peripheral controller,
- * suitable for use as part of a bcdDevice value, or a negative error code.
- *
- * NOTE:  this convention is purely optional, and has no meaning in terms of
- * any USB specification.  If you want to use a different convention in your
- * gadget driver firmware -- maybe a more formal revision ID -- feel free.
- *
- * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
- * to change their behavior accordingly.  For example it might help avoiding
- * some chip bug.
- */
-int usb_gadget_controller_number(struct usb_gadget *gadget)
-{
-	if (gadget_is_net2280(gadget))
-		return 0x01;
-	else if (gadget_is_dummy(gadget))
-		return 0x02;
-	else if (gadget_is_pxa(gadget))
-		return 0x03;
-	else if (gadget_is_goku(gadget))
-		return 0x06;
-	else if (gadget_is_omap(gadget))
-		return 0x08;
-	else if (gadget_is_pxa27x(gadget))
-		return 0x11;
-	else if (gadget_is_s3c2410(gadget))
-		return 0x12;
-	else if (gadget_is_at91(gadget))
-		return 0x13;
-	else if (gadget_is_imx(gadget))
-		return 0x14;
-	else if (gadget_is_musbhdrc(gadget))
-		return 0x16;
-	else if (gadget_is_atmel_usba(gadget))
-		return 0x18;
-	else if (gadget_is_fsl_usb2(gadget))
-		return 0x19;
-	else if (gadget_is_amd5536udc(gadget))
-		return 0x20;
-	else if (gadget_is_m66592(gadget))
-		return 0x21;
-	else if (gadget_is_fsl_qe(gadget))
-		return 0x22;
-	else if (gadget_is_ci13xxx_pci(gadget))
-		return 0x23;
-	else if (gadget_is_langwell(gadget))
-		return 0x24;
-	else if (gadget_is_r8a66597(gadget))
-		return 0x25;
-	else if (gadget_is_s3c_hsotg(gadget))
-		return 0x26;
-	else if (gadget_is_pch(gadget))
-		return 0x27;
-	else if (gadget_is_ci13xxx_msm(gadget))
-		return 0x28;
-	else if (gadget_is_renesas_usbhs(gadget))
-		return 0x29;
-	else if (gadget_is_s3c_hsudc(gadget))
-		return 0x30;
-	else if (gadget_is_net2272(gadget))
-		return 0x31;
-	else if (gadget_is_dwc3(gadget))
-		return 0x32;
-	else if (gadget_is_lpc32xx(gadget))
-		return 0x33;
-	else if (gadget_is_bcm63xx(gadget))
-		return 0x34;
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_controller_number);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index c7055cd1e92e..bcd04bc66b98 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -27,35 +27,12 @@
  * If you have forgotten the alphabetical order let VIM/EMACS
  * do that for you.
  */
-#define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
 #define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
-#define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
-#define gadget_is_bcm63xx(g)		(!strcmp("bcm63xx_udc", (g)->name))
-#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
-#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
-#define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
-#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
-#define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
-#define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
-#define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
-#define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
-#define gadget_is_lpc32xx(g)		(!strcmp("lpc32xx_udc", (g)->name))
-#define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
 #define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
 #define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
-#define gadget_is_omap(g)		(!strcmp("omap_udc", (g)->name))
-#define gadget_is_pch(g)		(!strcmp("pch_udc", (g)->name))
 #define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
 #define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
-#define gadget_is_r8a66597(g)		(!strcmp("r8a66597_udc", (g)->name))
-#define gadget_is_renesas_usbhs(g)	(!strcmp("renesas_usbhs_udc", (g)->name))
-#define gadget_is_s3c2410(g)		(!strcmp("s3c2410_udc", (g)->name))
-#define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
-#define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
-
-int usb_gadget_controller_number(struct usb_gadget *gadget);
 
 /**
  * gadget_supports_altsettings - return true if altsettings work
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 4181524d1c4b..881aab86ae99 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -137,8 +137,7 @@ static int __init midi_bind_config(struct usb_configuration *c)
 
 static int __init midi_bind(struct usb_composite_dev *cdev)
 {
-	struct usb_gadget *gadget = cdev->gadget;
-	int gcnum, status;
+	int status;
 
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
@@ -147,19 +146,6 @@ static int __init midi_bind(struct usb_composite_dev *cdev)
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 	midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum < 0) {
-		/* gmidi is so simple (no altsettings) that
-		 * it SHOULD NOT have problems with bulk-capable hardware.
-		 * so warn about unrecognized controllers, don't panic.
-		 */
-		pr_warning("%s: controller '%s' not recognized\n",
-			   __func__, gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x9999);
-	} else {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	}
-
 	status = usb_add_config(cdev, &midi_config, midi_bind_config);
 	if (status < 0)
 		return status;
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 5fa1bfa8c6c6..74130f6c12c0 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -143,7 +143,7 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
 	struct list_head *tmp;
-	int status, gcnum, funcs = 0;
+	int status, funcs = 0;
 
 	list_for_each(tmp, &hidg_func_list)
 		funcs++;
@@ -156,12 +156,6 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 9d2e75c017dc..88472bf7dbb7 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -247,7 +247,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev)
 static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
-	int status, gcnum;
+	int status;
 
 	if (!can_support_ecm(cdev->gadget)) {
 		dev_err(&gadget->dev, "controller '%s' not usable\n",
@@ -275,15 +275,6 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 		}
 	}
 
-	/* set bcdDevice */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	} else {
-		WARNING(cdev, "controller '%s' not recognized\n", gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/* allocate string IDs */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (unlikely(status < 0))
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index b21ec269b8f5..a22ad9af0565 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -139,7 +139,6 @@ static struct usb_configuration ncm_config_driver = {
 
 static int __init gncm_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -148,22 +147,6 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		dev_warn(&gadget->dev,
-			 "controller '%s' not recognized; trying %s\n",
-			 gadget->name,
-			 ncm_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index ad0cc3473073..661600abace8 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -84,6 +84,7 @@ static struct usb_device_descriptor device_desc = {
 	.bDeviceClass		= USB_CLASS_COMM,
 	.idVendor		= __constant_cpu_to_le16(NOKIA_VENDOR_ID),
 	.idProduct		= __constant_cpu_to_le16(NOKIA_PRODUCT_ID),
+	.bcdDevice		= cpu_to_le16(NOKIA_VERSION_NUM),
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
 	.bNumConfigurations =	1,
@@ -145,7 +146,6 @@ static struct usb_configuration nokia_config_100ma_driver = {
 
 static int __init nokia_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -170,18 +170,8 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	nokia_config_500ma_driver.iConfiguration = status;
 	nokia_config_100ma_driver.iConfiguration = status;
 
-	/* set up other descriptors */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM);
-	else {
-		/* this should only work with hw that supports altsettings
-		 * and several endpoints, anything else, panic.
-		 */
-		pr_err("nokia_bind: controller '%s' not recognized\n",
-			gadget->name);
+	if (!gadget_supports_altsettings(gadget))
 		goto err_usb;
-	}
 
 	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index e394050afd02..e156e3f26727 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1101,7 +1101,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
 	int			status = -ENOMEM;
-	int			gcnum;
 	size_t			len;
 	u32			i;
 	struct usb_request	*req;
@@ -1143,16 +1142,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		goto fail;
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	} else {
-		dev_warn(&gadget->dev, "controller '%s' not recognized\n",
-			gadget->name);
-		/* unrecognized, but safe unless bulk is REALLY quirky */
-		device_desc.bcdDevice =
-			cpu_to_le16(0xFFFF);
-	}
 	if (iPNPstring)
 		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
 
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index f17d4626af55..942067327d88 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -86,7 +86,7 @@ static struct usb_device_descriptor device_desc = {
 	/* .bMaxPacketSize0 = f(hardware) */
 	.idVendor =		cpu_to_le16(GS_VENDOR_ID),
 	/* .idProduct =	f(use_acm) */
-	/* .bcdDevice = f(hardware) */
+	.bcdDevice = cpu_to_le16(GS_VERSION_NUM << 16),
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
 	.bNumConfigurations =	1,
@@ -154,8 +154,6 @@ static struct usb_configuration serial_config_driver = {
 
 static int __init gs_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
-	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
 	status = gserial_setup(cdev->gadget, n_ports);
@@ -174,24 +172,6 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	serial_config_driver.iConfiguration = status;
 
-	/* set up other descriptors */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum);
-	else {
-		/* this is so simple (for now, no altsettings) that it
-		 * SHOULD NOT have problems with bulk-capable hardware.
-		 * so warn about unrcognized controllers -- don't panic.
-		 *
-		 * things like configuration and altsetting numbering
-		 * can need hardware-specific attention though.
-		 */
-		pr_warning("gs_bind: controller '%s' not recognized\n",
-			gadget->name);
-		device_desc.bcdDevice =
-			cpu_to_le16(GS_VERSION_NUM | 0x0099);
-	}
-
 	if (gadget_is_otg(cdev->gadget)) {
 		serial_config_driver.descriptors = otg_desc;
 		serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 0dabffa5f493..6bf4c0611365 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -253,8 +253,6 @@ static void zero_resume(struct usb_composite_dev *cdev)
 
 static int __init zero_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
-	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
 	/* Allocate string descriptor numbers ... note that string
@@ -281,21 +279,6 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 		loopback_add(cdev, autoresume != 0);
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	else {
-		/* gadget zero is so simple (for now, no altsettings) that
-		 * it SHOULD NOT have problems with bulk-capable hardware.
-		 * so just warn about unrcognized controllers -- don't panic.
-		 *
-		 * things like configuration and altsetting numbering
-		 * can need hardware-specific attention though.
-		 */
-		pr_warning("%s: controller '%s' not recognized\n",
-			longname, gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x9999);
-	}
 	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 65ae0a3feb5b..f8dda0621800 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -34,6 +34,8 @@
  * the composite model the host can use both functions at the same time.
  */
 
+#include <linux/bcd.h>
+#include <linux/version.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -418,6 +420,15 @@ struct usb_composite_overwrite {
 void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
 		struct usb_composite_overwrite *covr);
 
+static inline u16 get_default_bcdDevice(void)
+{
+	u16 bcdDevice;
+
+	bcdDevice = bin2bcd((LINUX_VERSION_CODE >> 16 & 0xff)) << 8;
+	bcdDevice |= bin2bcd((LINUX_VERSION_CODE >> 8 & 0xff));
+	return bcdDevice;
+}
+
 /* messaging utils */
 #define DBG(d, fmt, args...) \
 	dev_dbg(&(d)->gadget->dev , fmt , ## args)
-- 
cgit v1.2.3


From 9830317a3f97afc358949ffa87529ee9da49bb44 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 16:30:50 +0200
Subject: usb: gadget: add module.h to u_ether.c

Spotted by Fengguang Wu:
|In file included from drivers/usb/gadget/ether.c:110:0:
|drivers/usb/gadget/u_ether.c:87:21: error: expected ')' before 'uint'
|drivers/usb/gadget/u_ether.c:88:25: error: expected ')' before string constant

This is because u_ether.c relied on having module.h included somewhere.
This isn't the case since composite.c is no longer included.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/u_ether.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 1154a99dc8db..41b17d18ddc4 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -14,6 +14,7 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/ctype.h>
-- 
cgit v1.2.3


From 5c4d46eb89fe99011a02048533857345d9e8b506 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior
Date: Mon, 10 Sep 2012 19:06:44 +0200
Subject: usb: gadget serial: don't shift bcd version left by 16

Fengguang Wu reported:
|drivers/usb/gadget/serial.c:89:22: sparse: cast truncates bits from
|constant value (24000000 becomes 0)

I obviously let the version number shift away. Since the version is a
16bit number it can be applied as it.

Cc: fengguang.wu@intel.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/gadget/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 942067327d88..44752f531e85 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -86,7 +86,7 @@ static struct usb_device_descriptor device_desc = {
 	/* .bMaxPacketSize0 = f(hardware) */
 	.idVendor =		cpu_to_le16(GS_VENDOR_ID),
 	/* .idProduct =	f(use_acm) */
-	.bcdDevice = cpu_to_le16(GS_VERSION_NUM << 16),
+	.bcdDevice = cpu_to_le16(GS_VERSION_NUM),
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
 	.bNumConfigurations =	1,
-- 
cgit v1.2.3