From d1e33e654ef6bb3dee766353ed9dd31e7dcb8a94 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic
Date: Thu, 5 Dec 2013 10:02:15 +0100
Subject: cfg80211: in bitrate_mask, rename mcs to ht_mcs

Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also
rename mcs to ht_mcs in struct cfg80211_bitrate_mask.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/ath/ath6kl/wmi.c   | 6 +++---
 drivers/net/wireless/mwifiex/cfg80211.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 546d5da0b894..4f16d79c9eb1 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2754,9 +2754,9 @@ static int ath6kl_set_bitrate_mask64(struct wmi *wmi, u8 if_idx,
 				mask->control[band].legacy << 4;
 
 		/* copy mcs rate mask */
-		mcsrate = mask->control[band].mcs[1];
+		mcsrate = mask->control[band].ht_mcs[1];
 		mcsrate <<= 8;
-		mcsrate |= mask->control[band].mcs[0];
+		mcsrate |= mask->control[band].ht_mcs[0];
 		ratemask[band] |= mcsrate << 12;
 		ratemask[band] |= mcsrate << 28;
 	}
@@ -2806,7 +2806,7 @@ static int ath6kl_set_bitrate_mask32(struct wmi *wmi, u8 if_idx,
 				mask->control[band].legacy << 4;
 
 		/* copy mcs rate mask */
-		mcsrate = mask->control[band].mcs[0];
+		mcsrate = mask->control[band].ht_mcs[0];
 		ratemask[band] |= mcsrate << 12;
 		ratemask[band] |= mcsrate << 20;
 	}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 1c8116d46845..6f5e49b32e79 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1170,10 +1170,10 @@ static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
 	else
 		bitmap_rates[1] = mask->control[band].legacy;
 
-	/* Fill MCS rates */
-	bitmap_rates[2] = mask->control[band].mcs[0];
+	/* Fill HT MCS rates */
+	bitmap_rates[2] = mask->control[band].ht_mcs[0];
 	if (priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2)
-		bitmap_rates[2] |= mask->control[band].mcs[1] << 8;
+		bitmap_rates[2] |= mask->control[band].ht_mcs[1] << 8;
 
 	return mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
 				     HostCmd_ACT_GEN_SET, 0, bitmap_rates);
-- 
cgit v1.2.3


From 710e4d08f2ab6eed7950884ab30e684704e325ca Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach
Date: Thu, 28 Nov 2013 15:25:21 +0200
Subject: iwlwifi: mvm: don't send SMPS action frame with single RX antenna

Products that have only 1 antenna in Rx don't support MIMO
in RX. As a consequence, they will be in STATIC always.
Don't tell mac80211 to update SMPS in that case. mac80211
would send an action frame to the AP which is clearly
bogus.
As a matter of fact, we have seen that some APs send a
deauth when that happens.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/utils.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 56cf819bc0c7..f4aff56a36da 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -518,6 +518,11 @@ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	int i;
 
 	lockdep_assert_held(&mvm->mutex);
+
+	/* SMPS is irrelevant for NICs that don't have at least 2 RX antenna */
+	if (num_of_ant(iwl_fw_valid_rx_ant(mvm->fw)) == 1)
+		return;
+
 	mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	mvmvif->smps_requests[req_type] = smps_request;
 	for (i = 0; i < NUM_IWL_MVM_SMPS_REQ; i++) {
-- 
cgit v1.2.3


From 1ddbbb0c83de82599b1baf14bf6bb69a774d4fc7 Mon Sep 17 00:00:00 2001
From: Johannes Berg
Date: Wed, 4 Dec 2013 22:39:17 +0100
Subject: iwlwifi: mvm: use pre-RCU-sync sta removal operation

iwlmvm relies on the current mac80211 behaviour of allowing
station pointers to be valid for an RCU grace period after
returning from the sta_state() callback. To optimise these
cases, this behaviour is going away, so make the driver use
the new sta_pre_rcu_remove() method to clear the pointer in
the fw_id_to_mac_id[] array.

Since this may happen while the station is still present in
the firmware, don't set the pointer to NULL but to -ENOENT
to mark this particular case. In client mode, the station
is kept even longer (until marking the MAC as unassociated)
so the drain flow must take this new behavior into account.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 13 ++++++++-----
 drivers/net/wireless/iwlwifi/mvm/mac80211.c    | 23 +++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/sta.c         | 11 +++++++++--
 3 files changed, 40 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 67f6a2071653..27f140ceaac5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -98,14 +98,17 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 	if (vif->type == NL80211_IFTYPE_STATION &&
 	    ap_sta_id != IWL_MVM_STATION_COUNT) {
 		struct ieee80211_sta *sta;
-		struct iwl_mvm_sta *mvm_sta;
 
 		sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[ap_sta_id],
 						lockdep_is_held(&mvm->mutex));
-		mvm_sta = (void *)sta->drv_priv;
-		pos += scnprintf(buf+pos, bufsz-pos,
-				 "ap_sta_id %d - reduced Tx power %d\n",
-				 ap_sta_id, mvm_sta->bt_reduced_txpower);
+		if (!IS_ERR_OR_NULL(sta)) {
+			struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
+
+			pos += scnprintf(buf+pos, bufsz-pos,
+					 "ap_sta_id %d - reduced Tx power %d\n",
+					 ap_sta_id,
+					 mvm_sta->bt_reduced_txpower);
+		}
 	}
 
 	rcu_read_lock();
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index afc4419be46d..a77007cfd765 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1114,6 +1114,28 @@ static void iwl_mvm_mac_sta_notify(struct ieee80211_hw *hw,
 	}
 }
 
+static void iwl_mvm_sta_pre_rcu_remove(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_sta *sta)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv;
+
+	/*
+	 * This is called before mac80211 does RCU synchronisation,
+	 * so here we already invalidate our internal RCU-protected
+	 * station pointer. The rest of the code will thus no longer
+	 * be able to find the station this way, and we don't rely
+	 * on further RCU synchronisation after the sta_state()
+	 * callback deleted the station.
+	 */
+	mutex_lock(&mvm->mutex);
+	if (sta == rcu_access_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id]))
+		rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id],
+				   ERR_PTR(-ENOENT));
+	mutex_unlock(&mvm->mutex);
+}
+
 static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_sta *sta,
@@ -1761,6 +1783,7 @@ struct ieee80211_ops iwl_mvm_hw_ops = {
 	.bss_info_changed = iwl_mvm_bss_info_changed,
 	.hw_scan = iwl_mvm_mac_hw_scan,
 	.cancel_hw_scan = iwl_mvm_mac_cancel_hw_scan,
+	.sta_pre_rcu_remove = iwl_mvm_sta_pre_rcu_remove,
 	.sta_state = iwl_mvm_mac_sta_state,
 	.sta_notify = iwl_mvm_mac_sta_notify,
 	.allow_buffered_frames = iwl_mvm_mac_allow_buffered_frames,
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 7a5b7473eafa..026c2e06c46f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -452,8 +452,15 @@ void iwl_mvm_sta_drained_wk(struct work_struct *wk)
 			rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id],
 						  lockdep_is_held(&mvm->mutex));
 
-		/* This station is in use */
-		if (!IS_ERR(sta))
+		/*
+		 * This station is in use or RCU-removed; the latter happens in
+		 * managed mode, where mac80211 removes the station before we
+		 * can remove it from firmware (we can only do that after the
+		 * MAC is marked unassociated), and possibly while the deauth
+		 * frame to disconnect from the AP is still queued. Then, the
+		 * station pointer is -ENOENT when the last skb is reclaimed.
+		 */
+		if (!IS_ERR(sta) || PTR_ERR(sta) == -ENOENT)
 			continue;
 
 		if (PTR_ERR(sta) == -EINVAL) {
-- 
cgit v1.2.3


From 1f3b0ff8eccefb0a22398bb044fa12f7e3f6f058 Mon Sep 17 00:00:00 2001
From: Lilach Edelstein
Date: Sun, 6 Oct 2013 13:03:32 +0200
Subject: iwlwifi: mvm: Add Smart FIFO support

Send firmware a Smart FIFO Configuration host command to allow
interrupt coalescing. The smart FIFO is enabled when there is
only one bound interface (other than  p2p devices which are
ignored) and it is of type station, and activated while the
station is associated.

Smart Fifo allows aggragations of DMA transactions and by that
causes processor and memory controller to stay for a longer time
on lower c-states, thus saving platform power.
Firmware relies on driver to activate and disable it.

Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/Makefile   |   2 +-
 drivers/net/wireless/iwlwifi/mvm/binding.c  |  16 +-
 drivers/net/wireless/iwlwifi/mvm/fw-api.h   |  62 ++++++
 drivers/net/wireless/iwlwifi/mvm/fw.c       |   4 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  21 ++
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   7 +
 drivers/net/wireless/iwlwifi/mvm/ops.c      |   1 +
 drivers/net/wireless/iwlwifi/mvm/sf.c       | 291 ++++++++++++++++++++++++++++
 8 files changed, 402 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/wireless/iwlwifi/mvm/sf.c

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index 285d8c7486f5..3ea47ab27337 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -1,6 +1,6 @@
 obj-$(CONFIG_IWLMVM)   += iwlmvm.o
 iwlmvm-y += fw.o mac80211.o nvm.o ops.o phy-ctxt.o mac-ctxt.o
-iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o
+iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
 iwlmvm-y += power.o power_legacy.o bt-coex.o
 iwlmvm-y += led.o tt.o
diff --git a/drivers/net/wireless/iwlwifi/mvm/binding.c b/drivers/net/wireless/iwlwifi/mvm/binding.c
index 93fd1457954b..57d3eed86efa 100644
--- a/drivers/net/wireless/iwlwifi/mvm/binding.c
+++ b/drivers/net/wireless/iwlwifi/mvm/binding.c
@@ -183,15 +183,29 @@ int iwl_mvm_binding_add_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	if (WARN_ON_ONCE(!mvmvif->phy_ctxt))
 		return -EINVAL;
 
+	/*
+	 * Update SF - Disable if needed. if this fails, SF might still be on
+	 * while many macs are bound, which is forbidden - so fail the binding.
+	 */
+	if (iwl_mvm_sf_update(mvm, vif, false))
+		return -EINVAL;
+
 	return iwl_mvm_binding_update(mvm, vif, mvmvif->phy_ctxt, true);
 }
 
 int iwl_mvm_binding_remove_vif(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	int ret;
 
 	if (WARN_ON_ONCE(!mvmvif->phy_ctxt))
 		return -EINVAL;
 
-	return iwl_mvm_binding_update(mvm, vif, mvmvif->phy_ctxt, false);
+	ret = iwl_mvm_binding_update(mvm, vif, mvmvif->phy_ctxt, false);
+
+	if (!ret)
+		if (iwl_mvm_sf_update(mvm, vif, true))
+			IWL_ERR(mvm, "Failed to update SF state\n");
+
+	return ret;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index bad5a552dd8d..3af413386ad9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -183,6 +183,7 @@ enum {
 	BT_PROFILE_NOTIFICATION = 0xce,
 	BT_COEX_CI = 0x5d,
 
+	REPLY_SF_CFG_CMD = 0xd1,
 	REPLY_BEACON_FILTERING_CMD = 0xd2,
 
 	REPLY_DEBUG_CMD = 0xf0,
@@ -1363,4 +1364,65 @@ struct iwl_notif_statistics { /* STATISTICS_NTFY_API_S_VER_8 */
 	struct mvm_statistics_general general;
 } __packed;
 
+/***********************************
+ * Smart Fifo API
+ ***********************************/
+/* Smart Fifo state */
+enum iwl_sf_state {
+	SF_LONG_DELAY_ON = 0, /* should never be called by driver */
+	SF_FULL_ON,
+	SF_UNINIT,
+	SF_INIT_OFF,
+	SF_HW_NUM_STATES
+};
+
+/* Smart Fifo possible scenario */
+enum iwl_sf_scenario {
+	SF_SCENARIO_SINGLE_UNICAST,
+	SF_SCENARIO_AGG_UNICAST,
+	SF_SCENARIO_MULTICAST,
+	SF_SCENARIO_BA_RESP,
+	SF_SCENARIO_TX_RESP,
+	SF_NUM_SCENARIO
+};
+
+#define SF_TRANSIENT_STATES_NUMBER 2	/* SF_LONG_DELAY_ON and SF_FULL_ON */
+#define SF_NUM_TIMEOUT_TYPES 2		/* Aging timer and Idle timer */
+
+/* smart FIFO default values */
+#define SF_W_MARK_SISO 4096
+#define SF_W_MARK_MIMO2 8192
+#define SF_W_MARK_MIMO3 6144
+#define SF_W_MARK_LEGACY 4096
+#define SF_W_MARK_SCAN 4096
+
+/* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */
+#define SF_SINGLE_UNICAST_IDLE_TIMER 320	/* 300 uSec  */
+#define SF_SINGLE_UNICAST_AGING_TIMER 2016	/* 2 mSec */
+#define SF_AGG_UNICAST_IDLE_TIMER 320		/* 300 uSec */
+#define SF_AGG_UNICAST_AGING_TIMER 2016		/* 2 mSec */
+#define SF_MCAST_IDLE_TIMER 2016		/* 2 mSec */
+#define SF_MCAST_AGING_TIMER 10016		/* 10 mSec */
+#define SF_BA_IDLE_TIMER 320			/* 300 uSec */
+#define SF_BA_AGING_TIMER 2016			/* 2 mSec */
+#define SF_TX_RE_IDLE_TIMER 320			/* 300 uSec */
+#define SF_TX_RE_AGING_TIMER 2016		/* 2 mSec */
+
+#define SF_LONG_DELAY_AGING_TIMER 1000000	/* 1 Sec */
+
+/**
+ * Smart Fifo configuration command.
+ * @state: smart fifo state, types listed in iwl_sf_sate.
+ * @watermark: Minimum allowed availabe free space in RXF for transient state.
+ * @long_delay_timeouts: aging and idle timer values for each scenario
+ * in long delay state.
+ * @full_on_timeouts: timer values for each scenario in full on state.
+ */
+struct iwl_sf_cfg_cmd {
+	enum iwl_sf_state state;
+	__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
+	__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
+	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
+} __packed; /* SF_CFG_API_S_VER_2 */
+
 #endif /* __fw_api_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index 70e5297646b2..b2bfa732a594 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -386,6 +386,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 		goto error;
 	}
 
+	ret = iwl_mvm_sf_update(mvm, NULL, false);
+	if (ret)
+		IWL_ERR(mvm, "Failed to initialize Smart Fifo\n");
+
 	ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw));
 	if (ret)
 		goto error;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index afc4419be46d..f0f8b2c7ebef 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -850,7 +850,16 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 				iwl_mvm_protect_session(mvm, vif, dur, dur,
 							5 * dur);
 			}
+
+			iwl_mvm_sf_update(mvm, vif, false);
 		} else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) {
+			/*
+			 * If update fails - SF might be running in associated
+			 * mode while disassociated - which is forbidden.
+			 */
+			WARN_ONCE(iwl_mvm_sf_update(mvm, vif, false),
+				  "Failed to update SF upon disassociation\n");
+
 			/* remove AP station now that the MAC is unassoc */
 			ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id);
 			if (ret)
@@ -1200,6 +1209,17 @@ static int iwl_mvm_mac_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	return 0;
 }
 
+static void iwl_mvm_sta_rc_update(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_sta *sta, u32 changed)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+
+	if (vif->type == NL80211_IFTYPE_STATION &&
+	    changed & IEEE80211_RC_NSS_CHANGED)
+		iwl_mvm_sf_update(mvm, vif, false);
+}
+
 static int iwl_mvm_mac_conf_tx(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif, u16 ac,
 			       const struct ieee80211_tx_queue_params *params)
@@ -1765,6 +1785,7 @@ struct ieee80211_ops iwl_mvm_hw_ops = {
 	.sta_notify = iwl_mvm_mac_sta_notify,
 	.allow_buffered_frames = iwl_mvm_mac_allow_buffered_frames,
 	.set_rts_threshold = iwl_mvm_mac_set_rts_threshold,
+	.sta_rc_update = iwl_mvm_sta_rc_update,
 	.conf_tx = iwl_mvm_mac_conf_tx,
 	.mgd_prepare_tx = iwl_mvm_mac_mgd_prepare_tx,
 	.sched_scan_start = iwl_mvm_mac_sched_scan_start,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 7dc57cfe5803..bd072c7955be 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -489,6 +489,9 @@ struct iwl_mvm {
 	u8 scan_last_antenna_idx; /* to toggle TX between antennas */
 	u8 mgmt_last_antenna_idx;
 
+	/* last smart fifo state that was successfully sent to firmware */
+	enum iwl_sf_state sf_state;
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	struct dentry *debugfs_dir;
 	u32 dbgfs_sram_offset, dbgfs_sram_len;
@@ -869,4 +872,8 @@ void iwl_mvm_tt_initialize(struct iwl_mvm *mvm);
 void iwl_mvm_tt_exit(struct iwl_mvm *mvm);
 void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state);
 
+/* smart fifo */
+int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+		      bool added_vif);
+
 #endif /* __IWL_MVM_H__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index d86083c6f445..cae6123d25c3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -359,6 +359,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 		mvm->aux_queue = 11;
 		mvm->first_agg_queue = 12;
 	}
+	mvm->sf_state = SF_UNINIT;
 
 	mutex_init(&mvm->mutex);
 	spin_lock_init(&mvm->async_handlers_lock);
diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
new file mode 100644
index 000000000000..97bb3c3e75ce
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -0,0 +1,291 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#include "mvm.h"
+
+/* For counting bound interfaces */
+struct iwl_mvm_active_iface_iterator_data {
+	struct ieee80211_vif *ignore_vif;
+	u8 sta_vif_ap_sta_id;
+	enum iwl_sf_state sta_vif_state;
+	int num_active_macs;
+};
+
+/*
+ * Count bound interfaces which are not p2p, besides data->ignore_vif.
+ * data->station_vif will point to one bound vif of type station, if exists.
+ */
+static void iwl_mvm_bound_iface_iterator(void *_data, u8 *mac,
+					 struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_active_iface_iterator_data *data = _data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	if (vif == data->ignore_vif || !mvmvif->phy_ctxt ||
+	    vif->type == NL80211_IFTYPE_P2P_DEVICE)
+		return;
+
+	data->num_active_macs++;
+
+	if (vif->type == NL80211_IFTYPE_STATION) {
+		data->sta_vif_ap_sta_id = mvmvif->ap_sta_id;
+		if (vif->bss_conf.assoc)
+			data->sta_vif_state = SF_FULL_ON;
+		else
+			data->sta_vif_state = SF_INIT_OFF;
+	}
+}
+
+/*
+ * Aging and idle timeouts for the different possible scenarios
+ * in SF_FULL_ON state.
+ */
+static const __le32 sf_full_timeout[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES] = {
+	{
+		cpu_to_le32(SF_SINGLE_UNICAST_AGING_TIMER),
+		cpu_to_le32(SF_SINGLE_UNICAST_IDLE_TIMER)
+	},
+	{
+		cpu_to_le32(SF_AGG_UNICAST_AGING_TIMER),
+		cpu_to_le32(SF_AGG_UNICAST_IDLE_TIMER)
+	},
+	{
+		cpu_to_le32(SF_MCAST_AGING_TIMER),
+		cpu_to_le32(SF_MCAST_IDLE_TIMER)
+	},
+	{
+		cpu_to_le32(SF_BA_AGING_TIMER),
+		cpu_to_le32(SF_BA_IDLE_TIMER)
+	},
+	{
+		cpu_to_le32(SF_TX_RE_AGING_TIMER),
+		cpu_to_le32(SF_TX_RE_IDLE_TIMER)
+	},
+};
+
+static void iwl_mvm_fill_sf_command(struct iwl_sf_cfg_cmd *sf_cmd,
+				    struct ieee80211_sta *sta)
+{
+	int i, j, watermark;
+
+	sf_cmd->watermark[SF_LONG_DELAY_ON] = cpu_to_le32(SF_W_MARK_SCAN);
+
+	/*
+	 * If we are in association flow - check antenna configuration
+	 * capabilities of the AP station, and choose the watermark accordingly.
+	 */
+	if (sta) {
+		if (sta->ht_cap.ht_supported || sta->vht_cap.vht_supported) {
+			switch (sta->rx_nss) {
+			case 1:
+				watermark = SF_W_MARK_SISO;
+				break;
+			case 2:
+				watermark = SF_W_MARK_MIMO2;
+				break;
+			default:
+				watermark = SF_W_MARK_MIMO3;
+				break;
+			}
+		} else {
+			watermark = SF_W_MARK_LEGACY;
+		}
+	/* default watermark value for unassociated mode. */
+	} else {
+		watermark = SF_W_MARK_MIMO2;
+	}
+	sf_cmd->watermark[SF_FULL_ON] = cpu_to_le32(watermark);
+
+	for (i = 0; i < SF_NUM_SCENARIO; i++) {
+		for (j = 0; j < SF_NUM_TIMEOUT_TYPES; j++) {
+			sf_cmd->long_delay_timeouts[i][j] =
+					cpu_to_le32(SF_LONG_DELAY_AGING_TIMER);
+		}
+	}
+	BUILD_BUG_ON(sizeof(sf_full_timeout) !=
+		     sizeof(__le32) * SF_NUM_SCENARIO * SF_NUM_TIMEOUT_TYPES);
+
+	memcpy(sf_cmd->full_on_timeouts, sf_full_timeout,
+	       sizeof(sf_full_timeout));
+}
+
+static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id,
+			     enum iwl_sf_state new_state)
+{
+	struct iwl_sf_cfg_cmd sf_cmd = {
+		.state = new_state,
+	};
+	struct ieee80211_sta *sta;
+	int ret = 0;
+
+	/*
+	 * If an associated AP sta changed its antenna configuration, the state
+	 * will remain FULL_ON but SF parameters need to be reconsidered.
+	 */
+	if (new_state != SF_FULL_ON && mvm->sf_state == new_state)
+		return 0;
+
+	switch (new_state) {
+	case SF_UNINIT:
+		break;
+	case SF_FULL_ON:
+		if (sta_id == IWL_MVM_STATION_COUNT) {
+			IWL_ERR(mvm,
+				"No station: Cannot switch SF to FULL_ON\n");
+			return -EINVAL;
+		}
+		rcu_read_lock();
+		sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+		if (IS_ERR_OR_NULL(sta)) {
+			IWL_ERR(mvm, "Invalid station id\n");
+			rcu_read_unlock();
+			return -EINVAL;
+		}
+		iwl_mvm_fill_sf_command(&sf_cmd, sta);
+		rcu_read_unlock();
+		break;
+	case SF_INIT_OFF:
+		iwl_mvm_fill_sf_command(&sf_cmd, NULL);
+		break;
+	default:
+		WARN_ONCE(1, "Invalid state: %d. not sending Smart Fifo cmd\n",
+			  new_state);
+		return -EINVAL;
+	}
+
+	ret = iwl_mvm_send_cmd_pdu(mvm, REPLY_SF_CFG_CMD, CMD_ASYNC,
+				   sizeof(sf_cmd), &sf_cmd);
+	if (!ret)
+		mvm->sf_state = new_state;
+
+	return ret;
+}
+
+/*
+ * Update Smart fifo:
+ * Count bound interfaces that are not to be removed, ignoring p2p devices,
+ * and set new state accordingly.
+ */
+int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *changed_vif,
+		      bool remove_vif)
+{
+	enum iwl_sf_state new_state;
+	u8 sta_id = IWL_MVM_STATION_COUNT;
+	struct iwl_mvm_vif *mvmvif = NULL;
+	struct iwl_mvm_active_iface_iterator_data data = {
+		.ignore_vif = changed_vif,
+		.sta_vif_state = SF_UNINIT,
+		.sta_vif_ap_sta_id = IWL_MVM_STATION_COUNT,
+	};
+
+	if (IWL_UCODE_API(mvm->fw->ucode_ver) < 8)
+		return 0;
+
+	/*
+	 * Ignore the call if we are in HW Restart flow, or if the handled
+	 * vif is a p2p device.
+	 */
+	if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) ||
+	    (changed_vif && changed_vif->type == NL80211_IFTYPE_P2P_DEVICE))
+		return 0;
+
+	ieee80211_iterate_active_interfaces_atomic(mvm->hw,
+						   IEEE80211_IFACE_ITER_NORMAL,
+						   iwl_mvm_bound_iface_iterator,
+						   &data);
+
+	/* If changed_vif exists and is not to be removed, add to the count */
+	if (changed_vif && !remove_vif)
+		data.num_active_macs++;
+
+	switch (data.num_active_macs) {
+	case 0:
+		/* If there are no active macs - change state to SF_INIT_OFF */
+		new_state = SF_INIT_OFF;
+		break;
+	case 1:
+		if (remove_vif) {
+			/* The one active mac left is of type station
+			 * and we filled the relevant data during iteration
+			 */
+			new_state = data.sta_vif_state;
+			sta_id = data.sta_vif_ap_sta_id;
+		} else {
+			if (WARN_ON(!changed_vif))
+				return -EINVAL;
+			if (changed_vif->type != NL80211_IFTYPE_STATION) {
+				new_state = SF_UNINIT;
+			} else if (changed_vif->bss_conf.assoc) {
+				mvmvif = iwl_mvm_vif_from_mac80211(changed_vif);
+				sta_id = mvmvif->ap_sta_id;
+				new_state = SF_FULL_ON;
+			} else {
+				new_state = SF_INIT_OFF;
+			}
+		}
+		break;
+	default:
+		/* If there are multiple active macs - change to SF_UNINIT */
+		new_state = SF_UNINIT;
+	}
+	return iwl_mvm_sf_config(mvm, sta_id, new_state);
+}
-- 
cgit v1.2.3


From e36e5433c98d0411af51683c53578e84dee42470 Mon Sep 17 00:00:00 2001
From: Max Stepanov
Date: Tue, 27 Aug 2013 19:56:13 +0300
Subject: iwlwifi: mvm: add a generic cipher scheme support

This patch adds a cipher scheme support to extend a set of
the supported ciphers. The driver reads a cipher scheme list TLV
from FW image and passes it to mac80211 on hw registration.
After the cipher schemes are registered the driver handles key
installation and Tx/Rx calls related to the new ciphers.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-drv.c        | 39 +++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-fw-file.h    |  1 +
 drivers/net/wireless/iwlwifi/iwl-fw.h         | 41 +++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h | 10 ++++++-
 drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h  |  1 +
 drivers/net/wireless/iwlwifi/mvm/fw-api.h     |  1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c   | 13 ++++++++-
 drivers/net/wireless/iwlwifi/mvm/rx.c         |  6 ++++
 drivers/net/wireless/iwlwifi/mvm/sta.c        |  8 +++---
 drivers/net/wireless/iwlwifi/mvm/tx.c         |  3 +-
 10 files changed, 115 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index ff570027e9dd..4bebfb58fc7b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -322,6 +322,41 @@ static void set_sec_offset(struct iwl_firmware_pieces *pieces,
 	pieces->img[type].sec[sec].offset = offset;
 }
 
+static int iwl_store_cscheme(struct iwl_fw *fw, const u8 *data, const u32 len)
+{
+	int i, j;
+	struct iwl_fw_cscheme_list *l = (struct iwl_fw_cscheme_list *)data;
+	struct iwl_fw_cipher_scheme *fwcs;
+	struct ieee80211_cipher_scheme *cs;
+	u32 cipher;
+
+	if (len < sizeof(*l) ||
+	    len < sizeof(l->size) + l->size * sizeof(l->cs[0]))
+		return -EINVAL;
+
+	for (i = 0, j = 0; i < IWL_UCODE_MAX_CS && i < l->size; i++) {
+		fwcs = &l->cs[j];
+		cipher = le32_to_cpu(fwcs->cipher);
+
+		/* we skip schemes with zero cipher suite selector */
+		if (!cipher)
+			continue;
+
+		cs = &fw->cs[j++];
+		cs->cipher = cipher;
+		cs->iftype = BIT(NL80211_IFTYPE_STATION);
+		cs->hdr_len = fwcs->hdr_len;
+		cs->pn_len = fwcs->pn_len;
+		cs->pn_off = fwcs->pn_off;
+		cs->key_idx_off = fwcs->key_idx_off;
+		cs->key_idx_mask = fwcs->key_idx_mask;
+		cs->key_idx_shift = fwcs->key_idx_shift;
+		cs->mic_len = fwcs->mic_len;
+	}
+
+	return 0;
+}
+
 /*
  * Gets uCode section from tlv.
  */
@@ -729,6 +764,10 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 				return -EINVAL;
 			}
 			break;
+		case IWL_UCODE_TLV_CSCHEME:
+			if (iwl_store_cscheme(&drv->fw, tlv_data, tlv_len))
+				goto invalid_tlv_len;
+			break;
 		default:
 			IWL_DEBUG_INFO(drv, "unknown TLV: %d\n", tlv_type);
 			break;
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index 6c6c35c5228c..4f95734b2811 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -125,6 +125,7 @@ enum iwl_ucode_tlv_type {
 	IWL_UCODE_TLV_SECURE_SEC_INIT	= 25,
 	IWL_UCODE_TLV_SECURE_SEC_WOWLAN	= 26,
 	IWL_UCODE_TLV_NUM_OF_CPU	= 27,
+	IWL_UCODE_TLV_CSCHEME		= 28,
 };
 
 struct iwl_ucode_tlv {
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 75db087120c3..b2a4c1d51c0e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -209,6 +209,44 @@ enum iwl_fw_phy_cfg {
 	FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
 };
 
+#define IWL_UCODE_MAX_CS		1
+
+/**
+ * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
+ * @cipher: a cipher suite selector
+ * @flags: cipher scheme flags (currently reserved for a future use)
+ * @hdr_len: a size of MPDU security header
+ * @pn_len: a size of PN
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: bit shift needed to get key_idx
+ * @mic_len: mic length in bytes
+ * @hw_cipher: a HW cipher index used in host commands
+ */
+struct iwl_fw_cipher_scheme {
+	__le32 cipher;
+	u8 flags;
+	u8 hdr_len;
+	u8 pn_len;
+	u8 pn_off;
+	u8 key_idx_off;
+	u8 key_idx_mask;
+	u8 key_idx_shift;
+	u8 mic_len;
+	u8 hw_cipher;
+} __packed;
+
+/**
+ * struct iwl_fw_cscheme_list - a cipher scheme list
+ * @size: a number of entries
+ * @cs: cipher scheme entries
+ */
+struct iwl_fw_cscheme_list {
+	u8 size;
+	struct iwl_fw_cipher_scheme cs[];
+} __packed;
+
 /**
  * struct iwl_fw - variables associated with the firmware
  *
@@ -224,6 +262,7 @@ enum iwl_fw_phy_cfg {
  * @inst_evtlog_size: event log size for runtime ucode.
  * @inst_errlog_ptr: error log offfset for runtime ucode.
  * @mvm_fw: indicates this is MVM firmware
+ * @cipher_scheme: optional external cipher scheme.
  */
 struct iwl_fw {
 	u32 ucode_ver;
@@ -243,6 +282,8 @@ struct iwl_fw {
 	u32 phy_config;
 
 	bool mvm_fw;
+
+	struct ieee80211_cipher_scheme cs[IWL_UCODE_MAX_CS];
 };
 
 static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
index 4aca5933a65d..8c73ba74b6fd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h
@@ -138,7 +138,14 @@ enum iwl_sta_flags {
 
 /**
  * enum iwl_sta_key_flag - key flags for the ADD_STA host command
- * @STA_KEY_FLG_EN_MSK: mask for encryption algorithm
+ * @STA_KEY_FLG_NO_ENC: no encryption
+ * @STA_KEY_FLG_WEP: WEP encryption algorithm
+ * @STA_KEY_FLG_CCM: CCMP encryption algorithm
+ * @STA_KEY_FLG_TKIP: TKIP encryption algorithm
+ * @STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support)
+ * @STA_KEY_FLG_CMAC: CMAC encryption algorithm
+ * @STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm
+ * @STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value
  * @STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from
  *	station info array (1 - n 1X mode)
  * @STA_KEY_FLG_KEYID_MSK: the index of the key
@@ -152,6 +159,7 @@ enum iwl_sta_key_flag {
 	STA_KEY_FLG_WEP			= (1 << 0),
 	STA_KEY_FLG_CCM			= (2 << 0),
 	STA_KEY_FLG_TKIP		= (3 << 0),
+	STA_KEY_FLG_EXT			= (4 << 0),
 	STA_KEY_FLG_CMAC		= (6 << 0),
 	STA_KEY_FLG_ENC_UNKNOWN		= (7 << 0),
 	STA_KEY_FLG_EN_MSK		= (7 << 0),
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d606197bde8f..22864671d66c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -132,6 +132,7 @@ enum iwl_tx_flags {
 #define TX_CMD_SEC_WEP			0x01
 #define TX_CMD_SEC_CCM			0x02
 #define TX_CMD_SEC_TKIP			0x03
+#define TX_CMD_SEC_EXT			0x04
 #define TX_CMD_SEC_MSK			0x07
 #define TX_CMD_SEC_WEP_KEY_IDX_POS	6
 #define TX_CMD_SEC_WEP_KEY_IDX_MSK	0xc0
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 3af413386ad9..c9cfaadc40a2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -1053,6 +1053,7 @@ enum iwl_mvm_rx_status {
 	RX_MPDU_RES_STATUS_SEC_WEP_ENC			= (1 << 8),
 	RX_MPDU_RES_STATUS_SEC_CCM_ENC			= (2 << 8),
 	RX_MPDU_RES_STATUS_SEC_TKIP_ENC			= (3 << 8),
+	RX_MPDU_RES_STATUS_SEC_EXT_ENC			= (4 << 8),
 	RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC		= (6 << 8),
 	RX_MPDU_RES_STATUS_SEC_ENC_ERR			= (7 << 8),
 	RX_MPDU_RES_STATUS_SEC_ENC_MSK			= (7 << 8),
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index f0f8b2c7ebef..8a99ecc2c588 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -261,6 +261,12 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 
 	mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
 
+	/* currently FW API supports only one optional cipher scheme */
+	if (mvm->fw->cs && mvm->fw->cs->cipher) {
+		mvm->hw->n_cipher_schemes = 1;
+		mvm->hw->cipher_schemes = mvm->fw->cs;
+	}
+
 #ifdef CONFIG_PM_SLEEP
 	if (mvm->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
 	    mvm->trans->ops->d3_suspend &&
@@ -1342,7 +1348,12 @@ static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw,
 		 */
 		return 0;
 	default:
-		return -EOPNOTSUPP;
+		/* currently FW supports only one optional cipher scheme */
+		if (hw->n_cipher_schemes &&
+		    hw->cipher_schemes->cipher == key->cipher)
+			key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE;
+		else
+			return -EOPNOTSUPP;
 	}
 
 	mutex_lock(&mvm->mutex);
diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c
index 3a1f3982109d..454341cc3b27 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rx.c
@@ -251,6 +251,12 @@ static u32 iwl_mvm_set_mac80211_rx_flag(struct iwl_mvm *mvm,
 		stats->flag |= RX_FLAG_DECRYPTED;
 		return 0;
 
+	case RX_MPDU_RES_STATUS_SEC_EXT_ENC:
+		if (!(rx_pkt_status & RX_MPDU_RES_STATUS_MIC_OK))
+			return -1;
+		stats->flag |= RX_FLAG_DECRYPTED;
+		return 0;
+
 	default:
 		IWL_ERR(mvm, "Unhandled alg: 0x%x\n", rx_pkt_status);
 	}
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 7a5b7473eafa..4ea00da54b05 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -1123,8 +1123,8 @@ static int iwl_mvm_send_sta_key(struct iwl_mvm *mvm,
 		memcpy(cmd.key, keyconf->key, keyconf->keylen);
 		break;
 	default:
-		WARN_ON(1);
-		return -EINVAL;
+		key_flags |= cpu_to_le16(STA_KEY_FLG_EXT);
+		memcpy(cmd.key, keyconf->key, keyconf->keylen);
 	}
 
 	if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
@@ -1288,8 +1288,8 @@ int iwl_mvm_set_sta_key(struct iwl_mvm *mvm,
 					   0, NULL, CMD_SYNC);
 		break;
 	default:
-		IWL_ERR(mvm, "Unknown cipher %x\n", keyconf->cipher);
-		ret = -EINVAL;
+		ret = iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf,
+					   sta_id, 0, NULL, CMD_SYNC);
 	}
 
 	if (ret)
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index d87649ac88e1..735f86da7985 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -253,8 +253,7 @@ static void iwl_mvm_set_tx_cmd_crypto(struct iwl_mvm *mvm,
 		memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
 		break;
 	default:
-		IWL_ERR(mvm, "Unknown encode cipher %x\n", keyconf->cipher);
-		break;
+		tx_cmd->sec_ctl |= TX_CMD_SEC_EXT;
 	}
 }
 
-- 
cgit v1.2.3


From 183d281d268b92a381d53581415344329fee444d Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Tue, 12 Nov 2013 22:37:28 +0200
Subject: iwlwifi: publish STBC support in HT

Not all chips support STBC so allow this to be
another config parameter per chip type. If STBC
is supported then publish it in the HT caps.

Since 7260/7265/3160 chips support it - set the stbc
support bit.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c         | 1 +
 drivers/net/wireless/iwlwifi/iwl-config.h       | 2 ++
 drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c | 7 +++++++
 3 files changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 3c34a72a5d64..5efc6d1f3512 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -108,6 +108,7 @@ static const struct iwl_base_params iwl7000_base_params = {
 };
 
 static const struct iwl_ht_params iwl7000_ht_params = {
+	.stbc = true,
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
 	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 0b916249669e..e05440ff5cd4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -162,12 +162,14 @@ struct iwl_base_params {
 };
 
 /*
+ * @stbc: support Tx STBC and 1*SS Rx STBC
  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
  * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
  */
 struct iwl_ht_params {
 	enum ieee80211_smps_mode smps_mode;
 	const bool ht_greenfield_support; /* if used set to true */
+	const bool stbc;
 	bool use_rts_for_aggregation;
 	u8 ht40_bands;
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
index f4a6d317a023..4380c16580eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
@@ -751,6 +751,13 @@ void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg,
 	ht_info->ht_supported = true;
 	ht_info->cap = IEEE80211_HT_CAP_DSSSCCK40;
 
+	if (cfg->ht_params->stbc) {
+		ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+
+		if (tx_chains > 1)
+			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+	}
+
 	if (iwlwifi_mod_params.amsdu_size_8K)
 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 
-- 
cgit v1.2.3


From 48e6de611772c1d259f349638d1371c32c28f15f Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Sun, 3 Nov 2013 10:04:08 +0200
Subject: iwlwifi: set VHT beamformee STS cap correctly

It was set to zero which reflects support of a single STS.
Set according to the number of Rx antennas which correctly
reflects the number of STSs the STA can receive in a VHT NDP.
This improves beamforming and has been tested to improve Rx
throughput.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 94aef22df73a..e366f128a555 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -263,11 +263,14 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 				  struct iwl_nvm_data *data,
 				  struct ieee80211_sta_vht_cap *vht_cap)
 {
+	int bf_sts_cap = num_of_ant(data->valid_rx_ant) - 1;
+
 	vht_cap->vht_supported = true;
 
 	vht_cap->cap = IEEE80211_VHT_CAP_SHORT_GI_80 |
 		       IEEE80211_VHT_CAP_RXSTBC_1 |
 		       IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+		       bf_sts_cap << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT |
 		       7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
 
 	if (iwlwifi_mod_params.amsdu_size_8K)
-- 
cgit v1.2.3


From 5f7a6f9b256ffee6392d16207619448a1d7bfe14 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Tue, 12 Nov 2013 22:40:40 +0200
Subject: iwlwifi: publish Tx STBC support in VHT

If the device is MIMO and VHT capable it supports Tx STBC.
Unlike HT, any chip that supports VHT also support STBC so
no need for a config parameter.
Using num_of_ants multiple times warranted caching it.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index e366f128a555..ebf629bd7713 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -263,7 +263,8 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 				  struct iwl_nvm_data *data,
 				  struct ieee80211_sta_vht_cap *vht_cap)
 {
-	int bf_sts_cap = num_of_ant(data->valid_rx_ant) - 1;
+	int num_ants = num_of_ant(data->valid_rx_ant);
+	int bf_sts_cap = num_ants - 1;
 
 	vht_cap->vht_supported = true;
 
@@ -273,6 +274,9 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 		       bf_sts_cap << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT |
 		       7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
 
+	if (num_ants > 1)
+		vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC;
+
 	if (iwlwifi_mod_params.amsdu_size_8K)
 		vht_cap->cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991;
 
@@ -286,7 +290,7 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 14);
 
-	if (num_of_ant(data->valid_rx_ant) == 1 ||
+	if (num_ants == 1 ||
 	    cfg->rx_with_siso_diversity) {
 		vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
 				IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
-- 
cgit v1.2.3


From 175a70b7f22894cda03e1608f075c548656024f8 Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Sun, 14 Apr 2013 20:59:37 +0300
Subject: iwlwifi: mvm: Add uAPSD misbehaving AP notification handling

FW implements protective algorithm to identify AP's improper uAPSD
behavior. FW sends misbehaving AP notification in this case.
Add this notification handling. Avoid using uAPSD in next association
to the exactly same AP. Refactor iwl_mvm_power_build_cmd() to move
uAPSD related code to a separate function.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api-power.h |  16 ++
 drivers/net/wireless/iwlwifi/mvm/fw-api.h       |   1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c     |   1 +
 drivers/net/wireless/iwlwifi/mvm/mvm.h          |  10 +
 drivers/net/wireless/iwlwifi/mvm/ops.c          |   3 +
 drivers/net/wireless/iwlwifi/mvm/power.c        | 318 +++++++++++++-----------
 6 files changed, 209 insertions(+), 140 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
index 5cb93ae5cd2f..cb78e5539357 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -85,6 +85,8 @@
  *		PBW Snoozing enabled
  * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
  * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
+ * @POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
+ *		detection enablement
 */
 enum iwl_power_flags {
 	POWER_FLAGS_POWER_SAVE_ENA_MSK		= BIT(0),
@@ -94,6 +96,7 @@ enum iwl_power_flags {
 	POWER_FLAGS_BT_SCO_ENA			= BIT(8),
 	POWER_FLAGS_ADVANCE_PM_ENA_MSK		= BIT(9),
 	POWER_FLAGS_LPRX_ENA_MSK		= BIT(11),
+	POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK	= BIT(12),
 };
 
 #define IWL_POWER_VEC_SIZE 5
@@ -228,6 +231,19 @@ struct iwl_mac_power_cmd {
 	u8 reserved;
 } __packed;
 
+/*
+ * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when
+ * associated AP is identified as improperly implementing uAPSD protocol.
+ * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
+ * @sta_id: index of station in uCode's station table - associated AP ID in
+ *	    this context.
+ */
+struct iwl_uapsd_misbehaving_ap_notif {
+	__le32 sta_id;
+	u8 mac_id;
+	u8 reserved[3];
+} __packed;
+
 /**
  * struct iwl_beacon_filter_cmd
  * REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index c9cfaadc40a2..d0b939957684 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -141,6 +141,7 @@ enum {
 
 	/* Power - legacy power table command */
 	POWER_TABLE_CMD = 0x77,
+	PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
 
 	/* Thermal Throttling*/
 	REPLY_THERMAL_MNG_BACKOFF = 0x7e,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 8a99ecc2c588..8d8072886f37 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -858,6 +858,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 			}
 
 			iwl_mvm_sf_update(mvm, vif, false);
+			iwl_mvm_power_vif_assoc(mvm, vif);
 		} else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) {
 			/*
 			 * If update fails - SF might be running in associated
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index bd072c7955be..5da5e2deb11a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -181,6 +181,7 @@ enum iwl_dbgfs_pm_mask {
 	MVM_DEBUGFS_PM_LPRX_ENA = BIT(6),
 	MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD = BIT(7),
 	MVM_DEBUGFS_PM_SNOOZE_ENABLE = BIT(8),
+	MVM_DEBUGFS_PM_UAPSD_MISBEHAVING = BIT(9),
 };
 
 struct iwl_dbgfs_pm {
@@ -193,6 +194,7 @@ struct iwl_dbgfs_pm {
 	bool lprx_ena;
 	u32 lprx_rssi_threshold;
 	bool snooze_ena;
+	bool uapsd_misbehaving;
 	int mask;
 };
 
@@ -331,6 +333,9 @@ struct iwl_mvm_vif {
 #endif
 
 	enum ieee80211_smps_mode smps_requests[NUM_IWL_MVM_SMPS_REQ];
+
+	/* FW identified misbehaving AP */
+	u8 uapsd_misbehaving_bssid[ETH_ALEN];
 };
 
 static inline struct iwl_mvm_vif *
@@ -781,6 +786,11 @@ static inline int iwl_mvm_power_update_device_mode(struct iwl_mvm *mvm)
 	return 0;
 }
 
+void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
+					     struct iwl_rx_cmd_buffer *rxb,
+					     struct iwl_device_cmd *cmd);
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 static inline int iwl_mvm_power_dbgfs_read(struct iwl_mvm *mvm,
 					    struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index cae6123d25c3..2e9af9f55796 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -236,6 +236,8 @@ static const struct iwl_rx_handlers iwl_mvm_rx_handlers[] = {
 		   false),
 
 	RX_HANDLER(REPLY_ERROR, iwl_mvm_rx_fw_error, false),
+	RX_HANDLER(PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION,
+		   iwl_mvm_power_uapsd_misbehaving_ap_notif, false),
 };
 #undef RX_HANDLER
 #define CMD(x) [x] = #x
@@ -311,6 +313,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = {
 	CMD(REPLY_THERMAL_MNG_BACKOFF),
 	CMD(MAC_PM_POWER_TABLE),
 	CMD(BT_COEX_CI),
+	CMD(PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION),
 };
 #undef CMD
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 550824aa84ea..1817b2aa9eff 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -186,6 +186,92 @@ static void iwl_mvm_power_log(struct iwl_mvm *mvm,
 	}
 }
 
+static void iwl_mvm_power_configure_uapsd(struct iwl_mvm *mvm,
+					  struct ieee80211_vif *vif,
+					  struct iwl_mac_power_cmd *cmd)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	enum ieee80211_ac_numbers ac;
+	bool tid_found = false;
+
+	for (ac = IEEE80211_AC_VO; ac <= IEEE80211_AC_BK; ac++) {
+		if (!mvmvif->queue_params[ac].uapsd)
+			continue;
+
+		if (mvm->cur_ucode != IWL_UCODE_WOWLAN)
+			cmd->flags |=
+				cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK);
+
+		cmd->uapsd_ac_flags |= BIT(ac);
+
+		/* QNDP TID - the highest TID with no admission control */
+		if (!tid_found && !mvmvif->queue_params[ac].acm) {
+			tid_found = true;
+			switch (ac) {
+			case IEEE80211_AC_VO:
+				cmd->qndp_tid = 6;
+				break;
+			case IEEE80211_AC_VI:
+				cmd->qndp_tid = 5;
+				break;
+			case IEEE80211_AC_BE:
+				cmd->qndp_tid = 0;
+				break;
+			case IEEE80211_AC_BK:
+				cmd->qndp_tid = 1;
+				break;
+			}
+		}
+	}
+
+	if (!(cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)))
+		return;
+
+	cmd->flags |= cpu_to_le16(POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK);
+
+	if (cmd->uapsd_ac_flags == (BIT(IEEE80211_AC_VO) |
+				    BIT(IEEE80211_AC_VI) |
+				    BIT(IEEE80211_AC_BE) |
+				    BIT(IEEE80211_AC_BK))) {
+		cmd->flags |= cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK);
+		cmd->snooze_interval = cpu_to_le16(IWL_MVM_PS_SNOOZE_INTERVAL);
+		cmd->snooze_window = (mvm->cur_ucode == IWL_UCODE_WOWLAN) ?
+			cpu_to_le16(IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW) :
+			cpu_to_le16(IWL_MVM_PS_SNOOZE_WINDOW);
+	}
+
+	cmd->uapsd_max_sp = IWL_UAPSD_MAX_SP;
+
+	if (mvm->cur_ucode == IWL_UCODE_WOWLAN || cmd->flags &
+	    cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) {
+		cmd->rx_data_timeout_uapsd =
+			cpu_to_le32(IWL_MVM_WOWLAN_PS_RX_DATA_TIMEOUT);
+		cmd->tx_data_timeout_uapsd =
+			cpu_to_le32(IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT);
+	} else {
+		cmd->rx_data_timeout_uapsd =
+			cpu_to_le32(IWL_MVM_UAPSD_RX_DATA_TIMEOUT);
+		cmd->tx_data_timeout_uapsd =
+			cpu_to_le32(IWL_MVM_UAPSD_TX_DATA_TIMEOUT);
+	}
+
+	if (cmd->flags & cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) {
+		cmd->heavy_tx_thld_packets =
+			IWL_MVM_PS_SNOOZE_HEAVY_TX_THLD_PACKETS;
+		cmd->heavy_rx_thld_packets =
+			IWL_MVM_PS_SNOOZE_HEAVY_RX_THLD_PACKETS;
+	} else {
+		cmd->heavy_tx_thld_packets =
+			IWL_MVM_PS_HEAVY_TX_THLD_PACKETS;
+		cmd->heavy_rx_thld_packets =
+			IWL_MVM_PS_HEAVY_RX_THLD_PACKETS;
+	}
+	cmd->heavy_tx_thld_percentage =
+		IWL_MVM_PS_HEAVY_TX_THLD_PERCENT;
+	cmd->heavy_rx_thld_percentage =
+		IWL_MVM_PS_HEAVY_RX_THLD_PERCENT;
+}
+
 static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 				    struct ieee80211_vif *vif,
 				    struct iwl_mac_power_cmd *cmd)
@@ -198,8 +284,6 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	bool radar_detect = false;
 	struct iwl_mvm_vif *mvmvif __maybe_unused =
 		iwl_mvm_vif_from_mac80211(vif);
-	enum ieee80211_ac_numbers ac;
-	bool tid_found = false;
 
 	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
 							    mvmvif->color));
@@ -269,81 +353,9 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 			cpu_to_le32(IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT);
 	}
 
-	for (ac = IEEE80211_AC_VO; ac <= IEEE80211_AC_BK; ac++) {
-		if (!mvmvif->queue_params[ac].uapsd)
-			continue;
-
-		if (mvm->cur_ucode != IWL_UCODE_WOWLAN)
-			cmd->flags |=
-				cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK);
-
-		cmd->uapsd_ac_flags |= BIT(ac);
-
-		/* QNDP TID - the highest TID with no admission control */
-		if (!tid_found && !mvmvif->queue_params[ac].acm) {
-			tid_found = true;
-			switch (ac) {
-			case IEEE80211_AC_VO:
-				cmd->qndp_tid = 6;
-				break;
-			case IEEE80211_AC_VI:
-				cmd->qndp_tid = 5;
-				break;
-			case IEEE80211_AC_BE:
-				cmd->qndp_tid = 0;
-				break;
-			case IEEE80211_AC_BK:
-				cmd->qndp_tid = 1;
-				break;
-			}
-		}
-	}
-
-	if (cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)) {
-		if (cmd->uapsd_ac_flags == (BIT(IEEE80211_AC_VO) |
-					    BIT(IEEE80211_AC_VI) |
-					    BIT(IEEE80211_AC_BE) |
-					    BIT(IEEE80211_AC_BK))) {
-			cmd->flags |= cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK);
-			cmd->snooze_interval =
-				cpu_to_le16(IWL_MVM_PS_SNOOZE_INTERVAL);
-			cmd->snooze_window =
-				(mvm->cur_ucode == IWL_UCODE_WOWLAN) ?
-				cpu_to_le16(IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW) :
-				cpu_to_le16(IWL_MVM_PS_SNOOZE_WINDOW);
-		}
-
-		cmd->uapsd_max_sp = IWL_UAPSD_MAX_SP;
-
-		if (mvm->cur_ucode == IWL_UCODE_WOWLAN || cmd->flags &
-		    cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) {
-			cmd->rx_data_timeout_uapsd =
-				cpu_to_le32(IWL_MVM_WOWLAN_PS_RX_DATA_TIMEOUT);
-			cmd->tx_data_timeout_uapsd =
-				cpu_to_le32(IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT);
-		} else {
-			cmd->rx_data_timeout_uapsd =
-				cpu_to_le32(IWL_MVM_UAPSD_RX_DATA_TIMEOUT);
-			cmd->tx_data_timeout_uapsd =
-				cpu_to_le32(IWL_MVM_UAPSD_TX_DATA_TIMEOUT);
-		}
-
-		if (cmd->flags & cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) {
-			cmd->heavy_tx_thld_packets =
-				IWL_MVM_PS_SNOOZE_HEAVY_TX_THLD_PACKETS;
-			cmd->heavy_rx_thld_packets =
-				IWL_MVM_PS_SNOOZE_HEAVY_RX_THLD_PACKETS;
-		} else {
-			cmd->heavy_tx_thld_packets =
-				IWL_MVM_PS_HEAVY_TX_THLD_PACKETS;
-			cmd->heavy_rx_thld_packets =
-				IWL_MVM_PS_HEAVY_RX_THLD_PACKETS;
-		}
-		cmd->heavy_tx_thld_percentage =
-			IWL_MVM_PS_HEAVY_TX_THLD_PERCENT;
-		cmd->heavy_rx_thld_percentage =
-			IWL_MVM_PS_HEAVY_RX_THLD_PERCENT;
-	}
+	if (memcmp(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
+		   ETH_ALEN))
+		iwl_mvm_power_configure_uapsd(mvm, vif, cmd);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_KEEP_ALIVE)
@@ -472,6 +484,44 @@ static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
 				    &cmd);
 }
 
+void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	if (memcmp(vif->bss_conf.bssid, mvmvif->uapsd_misbehaving_bssid,
+		   ETH_ALEN))
+		memset(mvmvif->uapsd_misbehaving_bssid, 0, ETH_ALEN);
+}
+
+static void iwl_mvm_power_uapsd_misbehav_ap_iterator(void *_data, u8 *mac,
+						     struct ieee80211_vif *vif)
+{
+	u8 *ap_sta_id = _data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+	/* The ap_sta_id is not expected to change during current association
+	 * so no explicit protection is needed
+	 */
+	if (mvmvif->ap_sta_id == *ap_sta_id)
+		memcpy(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
+		       ETH_ALEN);
+}
+
+int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
+					     struct iwl_rx_cmd_buffer *rxb,
+					     struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_uapsd_misbehaving_ap_notif *notif = (void *)pkt->data;
+	u8 ap_sta_id = le32_to_cpu(notif->sta_id);
+
+	ieee80211_iterate_active_interfaces_atomic(
+		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+		iwl_mvm_power_uapsd_misbehav_ap_iterator, &ap_sta_id);
+
+	return 0;
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
 					struct ieee80211_vif *vif, char *buf,
@@ -494,70 +544,58 @@ static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
 	pos += scnprintf(buf+pos, bufsz-pos, "keep_alive = %d\n",
 			 le16_to_cpu(cmd.keep_alive_seconds));
 
-	if (cmd.flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)) {
-		pos += scnprintf(buf+pos, bufsz-pos, "skip_over_dtim = %d\n",
-				 (cmd.flags &
-				 cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) ?
-				 1 : 0);
-		pos += scnprintf(buf+pos, bufsz-pos, "skip_dtim_periods = %d\n",
-				 cmd.skip_dtim_periods);
-		if (!(cmd.flags &
-		      cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK))) {
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "rx_data_timeout = %d\n",
-					 le32_to_cpu(cmd.rx_data_timeout));
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "tx_data_timeout = %d\n",
-					 le32_to_cpu(cmd.tx_data_timeout));
-		}
-		if (cmd.flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK))
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "lprx_rssi_threshold = %d\n",
-					 cmd.lprx_rssi_threshold);
-		if (cmd.flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)) {
-			pos +=
-			scnprintf(buf+pos, bufsz-pos,
-				  "rx_data_timeout_uapsd = %d\n",
-				  le32_to_cpu(cmd.rx_data_timeout_uapsd));
-			pos +=
-			scnprintf(buf+pos, bufsz-pos,
-				  "tx_data_timeout_uapsd = %d\n",
-				  le32_to_cpu(cmd.tx_data_timeout_uapsd));
-			pos += scnprintf(buf+pos, bufsz-pos, "qndp_tid = %d\n",
-					 cmd.qndp_tid);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "uapsd_ac_flags = 0x%x\n",
-					 cmd.uapsd_ac_flags);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "uapsd_max_sp = %d\n",
-					 cmd.uapsd_max_sp);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "heavy_tx_thld_packets = %d\n",
-					 cmd.heavy_tx_thld_packets);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "heavy_rx_thld_packets = %d\n",
-					 cmd.heavy_rx_thld_packets);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "heavy_tx_thld_percentage = %d\n",
-					 cmd.heavy_tx_thld_percentage);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "heavy_rx_thld_percentage = %d\n",
-					 cmd.heavy_rx_thld_percentage);
-			pos +=
-			scnprintf(buf+pos, bufsz-pos, "snooze_enable = %d\n",
-				  (cmd.flags &
-				   cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) ?
-				  1 : 0);
-		}
-		if (cmd.flags & cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) {
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "snooze_interval = %d\n",
-					 cmd.snooze_interval);
-			pos += scnprintf(buf+pos, bufsz-pos,
-					 "snooze_window = %d\n",
-					 cmd.snooze_window);
-		}
+	if (!(cmd.flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)))
+		return pos;
+
+	pos += scnprintf(buf+pos, bufsz-pos, "skip_over_dtim = %d\n",
+			 (cmd.flags &
+			 cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) ? 1 : 0);
+	pos += scnprintf(buf+pos, bufsz-pos, "skip_dtim_periods = %d\n",
+			 cmd.skip_dtim_periods);
+	if (!(cmd.flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK))) {
+		pos += scnprintf(buf+pos, bufsz-pos, "rx_data_timeout = %d\n",
+				 le32_to_cpu(cmd.rx_data_timeout));
+		pos += scnprintf(buf+pos, bufsz-pos, "tx_data_timeout = %d\n",
+				 le32_to_cpu(cmd.tx_data_timeout));
 	}
+	if (cmd.flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK))
+		pos += scnprintf(buf+pos, bufsz-pos,
+				 "lprx_rssi_threshold = %d\n",
+				 cmd.lprx_rssi_threshold);
+
+	if (!(cmd.flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)))
+		return pos;
+
+	pos += scnprintf(buf+pos, bufsz-pos, "rx_data_timeout_uapsd = %d\n",
+			 le32_to_cpu(cmd.rx_data_timeout_uapsd));
+	pos += scnprintf(buf+pos, bufsz-pos, "tx_data_timeout_uapsd = %d\n",
+			 le32_to_cpu(cmd.tx_data_timeout_uapsd));
+	pos += scnprintf(buf+pos, bufsz-pos, "qndp_tid = %d\n", cmd.qndp_tid);
+	pos += scnprintf(buf+pos, bufsz-pos, "uapsd_ac_flags = 0x%x\n",
+			 cmd.uapsd_ac_flags);
+	pos += scnprintf(buf+pos, bufsz-pos, "uapsd_max_sp = %d\n",
+			 cmd.uapsd_max_sp);
+	pos += scnprintf(buf+pos, bufsz-pos, "heavy_tx_thld_packets = %d\n",
+			 cmd.heavy_tx_thld_packets);
+	pos += scnprintf(buf+pos, bufsz-pos, "heavy_rx_thld_packets = %d\n",
+			 cmd.heavy_rx_thld_packets);
+	pos += scnprintf(buf+pos, bufsz-pos, "heavy_tx_thld_percentage = %d\n",
+			 cmd.heavy_tx_thld_percentage);
+	pos += scnprintf(buf+pos, bufsz-pos, "heavy_rx_thld_percentage = %d\n",
+			 cmd.heavy_rx_thld_percentage);
+	pos += scnprintf(buf+pos, bufsz-pos, "uapsd_misbehaving_enable = %d\n",
+			 (cmd.flags &
+			  cpu_to_le16(POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK)) ?
+			 1 : 0);
+
+	if (!(cmd.flags & cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)))
+		return pos;
+
+	pos += scnprintf(buf+pos, bufsz-pos, "snooze_interval = %d\n",
+			 cmd.snooze_interval);
+	pos += scnprintf(buf+pos, bufsz-pos, "snooze_window = %d\n",
+			 cmd.snooze_window);
+
 	return pos;
 }
 
-- 
cgit v1.2.3


From 1c2abf724b3397830e60596a6a41e2d9f870d1a6 Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Tue, 27 Aug 2013 20:31:48 +0300
Subject: iwlwifi: mvm: Change power management dependency on multi MAC

FW still does not support power management on multiple MAC interfaces.
Currently the driver enforce this limitation by disabling PM if second
interface is added. Change this behavior to allow PM on a single interface
even if other interfaces exist but not bound to any specific PHY.
PM will be enabled if only one single interface is bound.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 63 ++++++++---------------------
 drivers/net/wireless/iwlwifi/mvm/mvm.h      | 19 ++++++---
 drivers/net/wireless/iwlwifi/mvm/power.c    | 36 +++++++++++------
 3 files changed, 53 insertions(+), 65 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 8d8072886f37..e1c379a61d83 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -494,17 +494,6 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	cancel_work_sync(&mvm->async_handlers_wk);
 }
 
-static void iwl_mvm_pm_disable_iterator(void *data, u8 *mac,
-					struct ieee80211_vif *vif)
-{
-	struct iwl_mvm *mvm = data;
-	int ret;
-
-	ret = iwl_mvm_power_disable(mvm, vif);
-	if (ret)
-		IWL_ERR(mvm, "failed to disable power management\n");
-}
-
 static void iwl_mvm_power_update_iterator(void *data, u8 *mac,
 					  struct ieee80211_vif *vif)
 {
@@ -547,26 +536,9 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_unlock;
 
-	/*
-	 * TODO: remove this temporary code.
-	 * Currently MVM FW supports power management only on single MAC.
-	 * If new interface added, disable PM on existing interface.
-	 * P2P device is a special case, since it is handled by FW similary to
-	 * scan. If P2P deviced is added, PM remains enabled on existing
-	 * interface.
-	 * Note: the method below does not count the new interface being added
-	 * at this moment.
-	 */
+	/* Counting number of interfaces is needed for legacy PM */
 	if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count++;
-	if (mvm->vif_count > 1) {
-		IWL_DEBUG_MAC80211(mvm,
-				   "Disable power on existing interfaces\n");
-		ieee80211_iterate_active_interfaces_atomic(
-					    mvm->hw,
-					    IEEE80211_IFACE_ITER_NORMAL,
-					    iwl_mvm_pm_disable_iterator, mvm);
-	}
 
 	/*
 	 * The AP binding flow can be done only after the beacon
@@ -597,11 +569,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out_release;
 
-	/*
-	 * Update power state on the new interface. Admittedly, based on
-	 * mac80211 logics this power update will disable power management
-	 */
-	iwl_mvm_power_update_mode(mvm, vif);
+	iwl_mvm_power_disable(mvm, vif);
 
 	/* beacon filtering */
 	ret = iwl_mvm_disable_beacon_filter(mvm, vif);
@@ -662,9 +630,12 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
  out_release:
 	if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count--;
+
+	/* TODO: remove this when legacy PM will be discarded */
 	ieee80211_iterate_active_interfaces(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_power_update_iterator, mvm);
+
 	iwl_mvm_mac_ctxt_release(mvm, vif);
  out_unlock:
 	mutex_unlock(&mvm->mutex);
@@ -750,21 +721,13 @@ static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw,
 		mvmvif->phy_ctxt = NULL;
 	}
 
-	/*
-	 * TODO: remove this temporary code.
-	 * Currently MVM FW supports power management only on single MAC.
-	 * Check if only one additional interface remains after removing
-	 * current one. Update power mode on the remaining interface.
-	 */
 	if (mvm->vif_count && vif->type != NL80211_IFTYPE_P2P_DEVICE)
 		mvm->vif_count--;
-	IWL_DEBUG_MAC80211(mvm, "Currently %d interfaces active\n",
-			   mvm->vif_count);
-	if (mvm->vif_count == 1) {
-		ieee80211_iterate_active_interfaces(
-					mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
-					iwl_mvm_power_update_iterator, mvm);
-	}
+
+	/* TODO: remove this when legacy PM will be discarded */
+	ieee80211_iterate_active_interfaces(
+		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+		iwl_mvm_power_update_iterator, mvm);
 
 	iwl_mvm_mac_ctxt_remove(mvm, vif);
 
@@ -1658,6 +1621,9 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 			goto out_remove_binding;
 	}
 
+	mvm->bound_vif_cnt++;
+	iwl_mvm_power_update_binding(mvm, vif);
+
 	goto out_unlock;
 
  out_remove_binding:
@@ -1695,6 +1661,9 @@ static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw,
 	iwl_mvm_binding_remove_vif(mvm, vif);
 out_unlock:
 	mvmvif->phy_ctxt = NULL;
+	mvm->bound_vif_cnt--;
+	iwl_mvm_power_update_binding(mvm, vif);
+
 	mutex_unlock(&mvm->mutex);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 5da5e2deb11a..51b0e9a4883f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -163,6 +163,8 @@ struct iwl_mvm_power_ops {
 				 struct ieee80211_vif *vif);
 	int (*power_update_device_mode)(struct iwl_mvm *mvm);
 	int (*power_disable)(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+	void (*power_update_binding)(struct iwl_mvm *mvm,
+				     struct ieee80211_vif *vif);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	int (*power_dbgfs_read)(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 				char *buf, int bufsz);
@@ -336,6 +338,8 @@ struct iwl_mvm_vif {
 
 	/* FW identified misbehaving AP */
 	u8 uapsd_misbehaving_bssid[ETH_ALEN];
+
+	bool pm_prevented;
 };
 
 static inline struct iwl_mvm_vif *
@@ -520,12 +524,6 @@ struct iwl_mvm {
 	 */
 	unsigned long fw_key_table[BITS_TO_LONGS(STA_KEY_MAX_NUM)];
 
-	/*
-	 * This counter of created interfaces is referenced only in conjunction
-	 * with FW limitation related to power management. Currently PM is
-	 * supported only on a single interface.
-	 * IMPORTANT: this variable counts all interfaces except P2P device.
-	 */
 	u8 vif_count;
 
 	/* -1 for always, 0 for never, >0 for that many times */
@@ -568,6 +566,8 @@ struct iwl_mvm {
 	u8 aux_queue;
 	u8 first_agg_queue;
 	u8 last_agg_queue;
+
+	u8 bound_vif_cnt;
 };
 
 /* Extract MVM priv from op_mode and _hw */
@@ -786,6 +786,13 @@ static inline int iwl_mvm_power_update_device_mode(struct iwl_mvm *mvm)
 	return 0;
 }
 
+static inline void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
+						struct ieee80211_vif *vif)
+{
+	if (mvm->pm_ops->power_update_binding)
+		mvm->pm_ops->power_update_binding(mvm, vif);
+}
+
 void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 					     struct iwl_rx_cmd_buffer *rxb,
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 1817b2aa9eff..d5d4935bc0e9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -311,7 +311,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	    mvmvif->dbgfs_pm.disable_power_off)
 		cmd->flags &= cpu_to_le16(~POWER_FLAGS_POWER_SAVE_ENA_MSK);
 #endif
-	if (!vif->bss_conf.ps)
+	if (!vif->bss_conf.ps || mvmvif->pm_prevented)
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK);
@@ -406,17 +406,6 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
 		return 0;
 
-	/*
-	 * TODO: The following vif_count verification is temporary condition.
-	 * Avoid power mode update if more than one interface is currently
-	 * active. Remove this condition when FW will support power management
-	 * on multiple MACs.
-	 */
-	IWL_DEBUG_POWER(mvm, "Currently %d interfaces active\n",
-			mvm->vif_count);
-	if (mvm->vif_count > 1)
-		return 0;
-
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
 	iwl_mvm_power_log(mvm, &cmd);
 
@@ -522,6 +511,28 @@ int iwl_mvm_power_uapsd_misbehaving_ap_notif(struct iwl_mvm *mvm,
 	return 0;
 }
 
+static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
+					   struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = _data;
+	int ret;
+
+	mvmvif->pm_prevented = (mvm->bound_vif_cnt <= 1) ? false : true;
+
+	ret = iwl_mvm_power_mac_update_mode(mvm, vif);
+	WARN_ONCE(ret, "Failed to update power parameters on a specific vif\n");
+}
+
+static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
+					  struct ieee80211_vif *vif)
+{
+	ieee80211_iterate_active_interfaces(mvm->hw,
+					    IEEE80211_IFACE_ITER_NORMAL,
+					    iwl_mvm_power_binding_iterator,
+					    mvm);
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm,
 					struct ieee80211_vif *vif, char *buf,
@@ -692,6 +703,7 @@ const struct iwl_mvm_power_ops pm_mac_ops = {
 	.power_update_mode = iwl_mvm_power_mac_update_mode,
 	.power_update_device_mode = iwl_mvm_power_update_device,
 	.power_disable = iwl_mvm_power_mac_disable,
+	.power_update_binding = _iwl_mvm_power_update_binding,
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	.power_dbgfs_read = iwl_mvm_power_mac_dbgfs_read,
 #endif
-- 
cgit v1.2.3


From 92d8556250c81bd6d4df522926a2cb3711dd01e2 Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Wed, 23 Oct 2013 11:50:34 +0200
Subject: iwlwifi: mvm: Disable power save for monitor interface

When monitor interface is activated device power save needs
to be disabled.
Re-consider power management status on other active
interfaces when monitor interface is bound or unbound.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 15 ++++++++++-----
 drivers/net/wireless/iwlwifi/mvm/mvm.h      | 10 +++++++---
 drivers/net/wireless/iwlwifi/mvm/power.c    | 22 ++++++++++++++++++----
 3 files changed, 35 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index e1c379a61d83..d36105fa4bf6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1610,7 +1610,13 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 		goto out_unlock;
 
 	/*
-	 * Setting the quota at this stage is only required for monitor
+	 * Power state must be updated before quotas,
+	 * otherwise fw will complain.
+	 */
+	mvm->bound_vif_cnt++;
+	iwl_mvm_power_update_binding(mvm, vif, true);
+
+	/* Setting the quota at this stage is only required for monitor
 	 * interfaces. For the other types, the bss_info changed flow
 	 * will handle quota settings.
 	 */
@@ -1621,13 +1627,12 @@ static int iwl_mvm_assign_vif_chanctx(struct ieee80211_hw *hw,
 			goto out_remove_binding;
 	}
 
-	mvm->bound_vif_cnt++;
-	iwl_mvm_power_update_binding(mvm, vif);
-
 	goto out_unlock;
 
  out_remove_binding:
 	iwl_mvm_binding_remove_vif(mvm, vif);
+	mvm->bound_vif_cnt--;
+	iwl_mvm_power_update_binding(mvm, vif, false);
  out_unlock:
 	mutex_unlock(&mvm->mutex);
 	if (ret)
@@ -1662,7 +1667,7 @@ static void iwl_mvm_unassign_vif_chanctx(struct ieee80211_hw *hw,
 out_unlock:
 	mvmvif->phy_ctxt = NULL;
 	mvm->bound_vif_cnt--;
-	iwl_mvm_power_update_binding(mvm, vif);
+	iwl_mvm_power_update_binding(mvm, vif, false);
 
 	mutex_unlock(&mvm->mutex);
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 51b0e9a4883f..7295f8e42f3e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -164,7 +164,7 @@ struct iwl_mvm_power_ops {
 	int (*power_update_device_mode)(struct iwl_mvm *mvm);
 	int (*power_disable)(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 	void (*power_update_binding)(struct iwl_mvm *mvm,
-				     struct ieee80211_vif *vif);
+				     struct ieee80211_vif *vif, bool assign);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	int (*power_dbgfs_read)(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 				char *buf, int bufsz);
@@ -568,6 +568,9 @@ struct iwl_mvm {
 	u8 last_agg_queue;
 
 	u8 bound_vif_cnt;
+
+	/* Indicate if device power save is allowed */
+	bool ps_prevented;
 };
 
 /* Extract MVM priv from op_mode and _hw */
@@ -787,10 +790,11 @@ static inline int iwl_mvm_power_update_device_mode(struct iwl_mvm *mvm)
 }
 
 static inline void iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-						struct ieee80211_vif *vif)
+						struct ieee80211_vif *vif,
+						bool assign)
 {
 	if (mvm->pm_ops->power_update_binding)
-		mvm->pm_ops->power_update_binding(mvm, vif);
+		mvm->pm_ops->power_update_binding(mvm, vif, assign);
 }
 
 void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index d5d4935bc0e9..cfed105b28b2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -301,7 +301,8 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	keep_alive = DIV_ROUND_UP(keep_alive, MSEC_PER_SEC);
 	cmd->keep_alive_seconds = cpu_to_le16(keep_alive);
 
-	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
+	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
+	    mvm->ps_prevented)
 		return;
 
 	cmd->flags |= cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK);
@@ -447,7 +448,7 @@ static int iwl_mvm_power_mac_disable(struct iwl_mvm *mvm,
 				    sizeof(cmd), &cmd);
 }
 
-static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
+static int _iwl_mvm_power_update_device(struct iwl_mvm *mvm, bool force_disable)
 {
 	struct iwl_device_power_cmd cmd = {
 		.flags = cpu_to_le16(DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK),
@@ -456,7 +457,8 @@ static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
 	if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD))
 		return 0;
 
-	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM)
+	if (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM ||
+	    force_disable)
 		cmd.flags |= cpu_to_le16(DEVICE_POWER_FLAGS_CAM_MSK);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -473,6 +475,11 @@ static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
 				    &cmd);
 }
 
+static int iwl_mvm_power_update_device(struct iwl_mvm *mvm)
+{
+	return _iwl_mvm_power_update_device(mvm, false);
+}
+
 void iwl_mvm_power_vif_assoc(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
@@ -525,8 +532,15 @@ static void iwl_mvm_power_binding_iterator(void *_data, u8 *mac,
 }
 
 static void _iwl_mvm_power_update_binding(struct iwl_mvm *mvm,
-					  struct ieee80211_vif *vif)
+					  struct ieee80211_vif *vif,
+					  bool assign)
 {
+	if (vif->type == NL80211_IFTYPE_MONITOR) {
+		int ret = _iwl_mvm_power_update_device(mvm, assign);
+		mvm->ps_prevented = assign;
+		WARN_ONCE(ret, "Failed to update power device state\n");
+	}
+
 	ieee80211_iterate_active_interfaces(mvm->hw,
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_power_binding_iterator,
-- 
cgit v1.2.3


From 51498cf6d8b42e89be77d48a2158825ca9bbd3bf Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Mon, 2 Sep 2013 17:10:14 +0300
Subject: iwlwifi: mvm: Enable power save on a single P2P client interface

Enable power save on P2P client interface only if it is the
only bound interface.
Avoid using uAPSD if P2P client is associated to GO that uses
opportunistic power save. This is due to current FW limitation.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h       |  3 +++
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  3 ++-
 drivers/net/wireless/iwlwifi/mvm/power.c    | 22 +++++++++++++++++++---
 3 files changed, 24 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index b2a4c1d51c0e..959562d9f55c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -92,6 +92,8 @@
  * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
  * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
  *	containing CAM (Continuous Active Mode) indication.
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
+ *	single bound interface).
  */
 enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_PAN			= BIT(0),
@@ -113,6 +115,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_SCHED_SCAN		= BIT(17),
 	IWL_UCODE_TLV_FLAGS_STA_KEY_CMD		= BIT(19),
 	IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD	= BIT(20),
+	IWL_UCODE_TLV_FLAGS_P2P_PS		= BIT(21),
 	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
 };
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index d36105fa4bf6..b42ce2cb8d2a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -861,7 +861,8 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		 */
 		iwl_mvm_remove_time_event(mvm, mvmvif,
 					  &mvmvif->time_event_data);
-	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_QOS)) {
+	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
+			      BSS_CHANGED_QOS)) {
 		ret = iwl_mvm_power_update_mode(mvm, vif);
 		if (ret)
 			IWL_ERR(mvm, "failed to update power mode\n");
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index cfed105b28b2..0ef467428064 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -284,6 +284,7 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	bool radar_detect = false;
 	struct iwl_mvm_vif *mvmvif __maybe_unused =
 		iwl_mvm_vif_from_mac80211(vif);
+	bool allow_uapsd = true;
 
 	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
 							    mvmvif->color));
@@ -354,8 +355,19 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 			cpu_to_le32(IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT);
 	}
 
-	if (memcmp(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
-		   ETH_ALEN))
+	if (!memcmp(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
+		    ETH_ALEN))
+		allow_uapsd = false;
+	/*
+	 * Avoid using uAPSD if P2P client is associated to GO that uses
+	 * opportunistic power save. This is due to current FW limitation.
+	 */
+	if (vif->p2p &&
+	    vif->bss_conf.p2p_noa_attr.oppps_ctwindow &
+	    IEEE80211_P2P_OPPPS_ENABLE_BIT)
+		allow_uapsd = false;
+
+	if (allow_uapsd)
 		iwl_mvm_power_configure_uapsd(mvm, vif, cmd);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -404,7 +416,11 @@ static int iwl_mvm_power_mac_update_mode(struct iwl_mvm *mvm,
 	bool ba_enable;
 	struct iwl_mac_power_cmd cmd = {};
 
-	if (vif->type != NL80211_IFTYPE_STATION || vif->p2p)
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return 0;
+
+	if (vif->p2p &&
+	    !(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS))
 		return 0;
 
 	iwl_mvm_power_build_cmd(mvm, vif, &cmd);
-- 
cgit v1.2.3


From e45a941deb24b956c9b5a06461810b45882c3e1c Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Wed, 4 Dec 2013 10:13:24 +0200
Subject: iwlwifi: mvm: add per-vif power debugfs hooks

This allows to tweak the power parameters per vif.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 353 +++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/power.c       |   7 +
 2 files changed, 360 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 67f6a2071653..747adffd4b07 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -63,6 +63,150 @@
 #include "mvm.h"
 #include "debugfs.h"
 
+static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm,
+				 struct ieee80211_vif *vif,
+				 enum iwl_dbgfs_pm_mask param, int val)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_dbgfs_pm *dbgfs_pm = &mvmvif->dbgfs_pm;
+
+	dbgfs_pm->mask |= param;
+
+	switch (param) {
+	case MVM_DEBUGFS_PM_KEEP_ALIVE: {
+		struct ieee80211_hw *hw = mvm->hw;
+		int dtimper = hw->conf.ps_dtim_period ?: 1;
+		int dtimper_msec = dtimper * vif->bss_conf.beacon_int;
+
+		IWL_DEBUG_POWER(mvm, "debugfs: set keep_alive= %d sec\n", val);
+		if (val * MSEC_PER_SEC < 3 * dtimper_msec)
+			IWL_WARN(mvm,
+				 "debugfs: keep alive period (%ld msec) is less than minimum required (%d msec)\n",
+				 val * MSEC_PER_SEC, 3 * dtimper_msec);
+		dbgfs_pm->keep_alive_seconds = val;
+		break;
+	}
+	case MVM_DEBUGFS_PM_SKIP_OVER_DTIM:
+		IWL_DEBUG_POWER(mvm, "skip_over_dtim %s\n",
+				val ? "enabled" : "disabled");
+		dbgfs_pm->skip_over_dtim = val;
+		break;
+	case MVM_DEBUGFS_PM_SKIP_DTIM_PERIODS:
+		IWL_DEBUG_POWER(mvm, "skip_dtim_periods=%d\n", val);
+		dbgfs_pm->skip_dtim_periods = val;
+		break;
+	case MVM_DEBUGFS_PM_RX_DATA_TIMEOUT:
+		IWL_DEBUG_POWER(mvm, "rx_data_timeout=%d\n", val);
+		dbgfs_pm->rx_data_timeout = val;
+		break;
+	case MVM_DEBUGFS_PM_TX_DATA_TIMEOUT:
+		IWL_DEBUG_POWER(mvm, "tx_data_timeout=%d\n", val);
+		dbgfs_pm->tx_data_timeout = val;
+		break;
+	case MVM_DEBUGFS_PM_DISABLE_POWER_OFF:
+		IWL_DEBUG_POWER(mvm, "disable_power_off=%d\n", val);
+		dbgfs_pm->disable_power_off = val;
+		break;
+	case MVM_DEBUGFS_PM_LPRX_ENA:
+		IWL_DEBUG_POWER(mvm, "lprx %s\n", val ? "enabled" : "disabled");
+		dbgfs_pm->lprx_ena = val;
+		break;
+	case MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD:
+		IWL_DEBUG_POWER(mvm, "lprx_rssi_threshold=%d\n", val);
+		dbgfs_pm->lprx_rssi_threshold = val;
+		break;
+	case MVM_DEBUGFS_PM_SNOOZE_ENABLE:
+		IWL_DEBUG_POWER(mvm, "snooze_enable=%d\n", val);
+		dbgfs_pm->snooze_ena = val;
+		break;
+	case MVM_DEBUGFS_PM_UAPSD_MISBEHAVING:
+		IWL_DEBUG_POWER(mvm, "uapsd_misbehaving_enable=%d\n", val);
+		dbgfs_pm->uapsd_misbehaving = val;
+		break;
+	}
+}
+
+static ssize_t iwl_dbgfs_pm_params_write(struct ieee80211_vif *vif, char *buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = mvmvif->mvm;
+	enum iwl_dbgfs_pm_mask param;
+	int val, ret;
+
+	if (!strncmp("keep_alive=", buf, 11)) {
+		if (sscanf(buf + 11, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_KEEP_ALIVE;
+	} else if (!strncmp("skip_over_dtim=", buf, 15)) {
+		if (sscanf(buf + 15, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_SKIP_OVER_DTIM;
+	} else if (!strncmp("skip_dtim_periods=", buf, 18)) {
+		if (sscanf(buf + 18, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_SKIP_DTIM_PERIODS;
+	} else if (!strncmp("rx_data_timeout=", buf, 16)) {
+		if (sscanf(buf + 16, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_RX_DATA_TIMEOUT;
+	} else if (!strncmp("tx_data_timeout=", buf, 16)) {
+		if (sscanf(buf + 16, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_TX_DATA_TIMEOUT;
+	} else if (!strncmp("disable_power_off=", buf, 18) &&
+		   !(mvm->fw->ucode_capa.flags &
+		     IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD)) {
+		if (sscanf(buf + 18, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_DISABLE_POWER_OFF;
+	} else if (!strncmp("lprx=", buf, 5)) {
+		if (sscanf(buf + 5, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_LPRX_ENA;
+	} else if (!strncmp("lprx_rssi_threshold=", buf, 20)) {
+		if (sscanf(buf + 20, "%d", &val) != 1)
+			return -EINVAL;
+		if (val > POWER_LPRX_RSSI_THRESHOLD_MAX || val <
+		    POWER_LPRX_RSSI_THRESHOLD_MIN)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD;
+	} else if (!strncmp("snooze_enable=", buf, 14)) {
+		if (sscanf(buf + 14, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_SNOOZE_ENABLE;
+	} else if (!strncmp("uapsd_misbehaving=", buf, 18)) {
+		if (sscanf(buf + 18, "%d", &val) != 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_PM_UAPSD_MISBEHAVING;
+	} else {
+		return -EINVAL;
+	}
+
+	mutex_lock(&mvm->mutex);
+	iwl_dbgfs_update_pm(mvm, vif, param, val);
+	ret = iwl_mvm_power_update_mode(mvm, vif);
+	mutex_unlock(&mvm->mutex);
+
+	return ret ?: count;
+}
+
+static ssize_t iwl_dbgfs_pm_params_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct ieee80211_vif *vif = file->private_data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = mvmvif->mvm;
+	char buf[512];
+	int bufsz = sizeof(buf);
+	int pos;
+
+	pos = iwl_mvm_power_dbgfs_read(mvm, vif, buf, bufsz);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
 static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 					 char __user *user_buf,
 					 size_t count, loff_t *ppos)
@@ -122,6 +266,201 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static void iwl_dbgfs_update_bf(struct ieee80211_vif *vif,
+				enum iwl_dbgfs_bf_mask param, int value)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_dbgfs_bf *dbgfs_bf = &mvmvif->dbgfs_bf;
+
+	dbgfs_bf->mask |= param;
+
+	switch (param) {
+	case MVM_DEBUGFS_BF_ENERGY_DELTA:
+		dbgfs_bf->bf_energy_delta = value;
+		break;
+	case MVM_DEBUGFS_BF_ROAMING_ENERGY_DELTA:
+		dbgfs_bf->bf_roaming_energy_delta = value;
+		break;
+	case MVM_DEBUGFS_BF_ROAMING_STATE:
+		dbgfs_bf->bf_roaming_state = value;
+		break;
+	case MVM_DEBUGFS_BF_TEMP_THRESHOLD:
+		dbgfs_bf->bf_temp_threshold = value;
+		break;
+	case MVM_DEBUGFS_BF_TEMP_FAST_FILTER:
+		dbgfs_bf->bf_temp_fast_filter = value;
+		break;
+	case MVM_DEBUGFS_BF_TEMP_SLOW_FILTER:
+		dbgfs_bf->bf_temp_slow_filter = value;
+		break;
+	case MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER:
+		dbgfs_bf->bf_enable_beacon_filter = value;
+		break;
+	case MVM_DEBUGFS_BF_DEBUG_FLAG:
+		dbgfs_bf->bf_debug_flag = value;
+		break;
+	case MVM_DEBUGFS_BF_ESCAPE_TIMER:
+		dbgfs_bf->bf_escape_timer = value;
+		break;
+	case MVM_DEBUGFS_BA_ENABLE_BEACON_ABORT:
+		dbgfs_bf->ba_enable_beacon_abort = value;
+		break;
+	case MVM_DEBUGFS_BA_ESCAPE_TIMER:
+		dbgfs_bf->ba_escape_timer = value;
+		break;
+	}
+}
+
+static ssize_t iwl_dbgfs_bf_params_write(struct ieee80211_vif *vif, char *buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm *mvm = mvmvif->mvm;
+	enum iwl_dbgfs_bf_mask param;
+	int value, ret = 0;
+
+	if (!strncmp("bf_energy_delta=", buf, 16)) {
+		if (sscanf(buf+16, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_ENERGY_DELTA_MIN ||
+		    value > IWL_BF_ENERGY_DELTA_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_ENERGY_DELTA;
+	} else if (!strncmp("bf_roaming_energy_delta=", buf, 24)) {
+		if (sscanf(buf+24, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_ROAMING_ENERGY_DELTA_MIN ||
+		    value > IWL_BF_ROAMING_ENERGY_DELTA_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_ROAMING_ENERGY_DELTA;
+	} else if (!strncmp("bf_roaming_state=", buf, 17)) {
+		if (sscanf(buf+17, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_ROAMING_STATE_MIN ||
+		    value > IWL_BF_ROAMING_STATE_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_ROAMING_STATE;
+	} else if (!strncmp("bf_temp_threshold=", buf, 18)) {
+		if (sscanf(buf+18, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_TEMP_THRESHOLD_MIN ||
+		    value > IWL_BF_TEMP_THRESHOLD_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_TEMP_THRESHOLD;
+	} else if (!strncmp("bf_temp_fast_filter=", buf, 20)) {
+		if (sscanf(buf+20, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_TEMP_FAST_FILTER_MIN ||
+		    value > IWL_BF_TEMP_FAST_FILTER_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_TEMP_FAST_FILTER;
+	} else if (!strncmp("bf_temp_slow_filter=", buf, 20)) {
+		if (sscanf(buf+20, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_TEMP_SLOW_FILTER_MIN ||
+		    value > IWL_BF_TEMP_SLOW_FILTER_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_TEMP_SLOW_FILTER;
+	} else if (!strncmp("bf_enable_beacon_filter=", buf, 24)) {
+		if (sscanf(buf+24, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < 0 || value > 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER;
+	} else if (!strncmp("bf_debug_flag=", buf, 14)) {
+		if (sscanf(buf+14, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < 0 || value > 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_DEBUG_FLAG;
+	} else if (!strncmp("bf_escape_timer=", buf, 16)) {
+		if (sscanf(buf+16, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BF_ESCAPE_TIMER_MIN ||
+		    value > IWL_BF_ESCAPE_TIMER_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BF_ESCAPE_TIMER;
+	} else if (!strncmp("ba_escape_timer=", buf, 16)) {
+		if (sscanf(buf+16, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < IWL_BA_ESCAPE_TIMER_MIN ||
+		    value > IWL_BA_ESCAPE_TIMER_MAX)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BA_ESCAPE_TIMER;
+	} else if (!strncmp("ba_enable_beacon_abort=", buf, 23)) {
+		if (sscanf(buf+23, "%d", &value) != 1)
+			return -EINVAL;
+		if (value < 0 || value > 1)
+			return -EINVAL;
+		param = MVM_DEBUGFS_BA_ENABLE_BEACON_ABORT;
+	} else {
+		return -EINVAL;
+	}
+
+	mutex_lock(&mvm->mutex);
+	iwl_dbgfs_update_bf(vif, param, value);
+	if (param == MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER && !value)
+		ret = iwl_mvm_disable_beacon_filter(mvm, vif);
+	else
+		ret = iwl_mvm_enable_beacon_filter(mvm, vif);
+	mutex_unlock(&mvm->mutex);
+
+	return ret ?: count;
+}
+
+static ssize_t iwl_dbgfs_bf_params_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct ieee80211_vif *vif = file->private_data;
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	char buf[256];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+	struct iwl_beacon_filter_cmd cmd = {
+		IWL_BF_CMD_CONFIG_DEFAULTS,
+		.bf_enable_beacon_filter =
+			cpu_to_le32(IWL_BF_ENABLE_BEACON_FILTER_DEFAULT),
+		.ba_enable_beacon_abort =
+			cpu_to_le32(IWL_BA_ENABLE_BEACON_ABORT_DEFAULT),
+	};
+
+	iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd);
+	if (mvmvif->bf_data.bf_enabled)
+		cmd.bf_enable_beacon_filter = cpu_to_le32(1);
+	else
+		cmd.bf_enable_beacon_filter = 0;
+
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_energy_delta = %d\n",
+			 le32_to_cpu(cmd.bf_energy_delta));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_roaming_energy_delta = %d\n",
+			 le32_to_cpu(cmd.bf_roaming_energy_delta));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_roaming_state = %d\n",
+			 le32_to_cpu(cmd.bf_roaming_state));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_temp_threshold = %d\n",
+			 le32_to_cpu(cmd.bf_temp_threshold));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_temp_fast_filter = %d\n",
+			 le32_to_cpu(cmd.bf_temp_fast_filter));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_temp_slow_filter = %d\n",
+			 le32_to_cpu(cmd.bf_temp_slow_filter));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_enable_beacon_filter = %d\n",
+			 le32_to_cpu(cmd.bf_enable_beacon_filter));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_debug_flag = %d\n",
+			 le32_to_cpu(cmd.bf_debug_flag));
+	pos += scnprintf(buf+pos, bufsz-pos, "bf_escape_timer = %d\n",
+			 le32_to_cpu(cmd.bf_escape_timer));
+	pos += scnprintf(buf+pos, bufsz-pos, "ba_escape_timer = %d\n",
+			 le32_to_cpu(cmd.ba_escape_timer));
+	pos += scnprintf(buf+pos, bufsz-pos, "ba_enable_beacon_abort = %d\n",
+			 le32_to_cpu(cmd.ba_enable_beacon_abort));
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+#define MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz) \
+	_MVM_DEBUGFS_WRITE_FILE_OPS(name, bufsz, struct ieee80211_vif)
+#define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
+	_MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz, struct ieee80211_vif)
 #define MVM_DEBUGFS_ADD_FILE_VIF(name, parent, mode) do {		\
 		if (!debugfs_create_file(#name, mode, parent, vif,	\
 					 &iwl_dbgfs_##name##_ops))	\
@@ -129,6 +468,8 @@ static ssize_t iwl_dbgfs_mac_params_read(struct file *file,
 	} while (0)
 
 MVM_DEBUGFS_READ_FILE_OPS(mac_params);
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(pm_params, 32);
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(bf_params, 256);
 
 void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
@@ -152,9 +493,21 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 		return;
 	}
 
+	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM &&
+	    ((vif->type == NL80211_IFTYPE_STATION && !vif->p2p) ||
+	     (vif->type == NL80211_IFTYPE_STATION && vif->p2p &&
+	      mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS)))
+		MVM_DEBUGFS_ADD_FILE_VIF(pm_params, mvmvif->dbgfs_dir, S_IWUSR |
+					 S_IRUSR);
+
 	MVM_DEBUGFS_ADD_FILE_VIF(mac_params, mvmvif->dbgfs_dir,
 				 S_IRUSR);
 
+	if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p &&
+	    mvmvif == mvm->bf_allowed_vif)
+		MVM_DEBUGFS_ADD_FILE_VIF(bf_params, mvmvif->dbgfs_dir,
+					 S_IRUSR | S_IWUSR);
+
 	/*
 	 * Create symlink for convenience pointing to interface specific
 	 * debugfs entries for the driver. For example, under
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 0ef467428064..d173ea27417e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -406,6 +406,13 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 			cmd->flags &=
 				cpu_to_le16(~POWER_FLAGS_SNOOZE_ENA_MSK);
 	}
+	if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_UAPSD_MISBEHAVING) {
+		u16 flag = POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK;
+		if (mvmvif->dbgfs_pm.uapsd_misbehaving)
+			cmd->flags |= cpu_to_le16(flag);
+		else
+			cmd->flags &= cpu_to_le16(flag);
+	}
 #endif /* CONFIG_IWLWIFI_DEBUGFS */
 }
 
-- 
cgit v1.2.3


From ee9c6cb07a11fbb6ec326bd5ea498da5bd89140e Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach
Date: Wed, 4 Dec 2013 13:53:39 +0200
Subject: iwlwifi: mvm: move iwl_mvm_set_tx_power to PHY area

This is more related to phy contexts than to mac context.
Move this function to there.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index b42ce2cb8d2a..9a27f57c5e98 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -516,6 +516,20 @@ static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm)
 	return NULL;
 }
 
+static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
+				s8 tx_power)
+{
+	/* FW is in charge of regulatory enforcement */
+	struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = {
+		.mac_context_id = iwl_mvm_vif_from_mac80211(vif)->id,
+		.pwr_restriction = cpu_to_le16(tx_power),
+	};
+
+	return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, CMD_SYNC,
+				    sizeof(reduce_txpwr_cmd),
+				    &reduce_txpwr_cmd);
+}
+
 static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif)
 {
@@ -736,20 +750,6 @@ out_release:
 	mutex_unlock(&mvm->mutex);
 }
 
-static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-				s8 tx_power)
-{
-	/* FW is in charge of regulatory enforcement */
-	struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = {
-		.mac_context_id = iwl_mvm_vif_from_mac80211(vif)->id,
-		.pwr_restriction = cpu_to_le16(tx_power),
-	};
-
-	return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, CMD_SYNC,
-				    sizeof(reduce_txpwr_cmd),
-				    &reduce_txpwr_cmd);
-}
-
 static int iwl_mvm_mac_config(struct ieee80211_hw *hw, u32 changed)
 {
 	return 0;
-- 
cgit v1.2.3


From e59647eaadf181faea822eaaf09ca760b298a0cb Mon Sep 17 00:00:00 2001
From: Eliad Peller
Date: Thu, 28 Nov 2013 14:08:50 +0200
Subject: iwlwifi: mvm: add multicast filtering support

Configure the fw to filter multicast according to
the addresses given by mac80211.

Note that bssid should be given even if we want
to pass all the multicast frames.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h   |   1 +
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 111 ++++++++++++++++++++++++----
 drivers/net/wireless/iwlwifi/mvm/mvm.h      |   1 +
 drivers/net/wireless/iwlwifi/mvm/ops.c      |   2 +
 4 files changed, 102 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index d0b939957684..1c3079714c2b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -1134,6 +1134,7 @@ struct iwl_set_calib_default_cmd {
 } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
 
 #define MAX_PORT_ID_NUM	2
+#define MAX_MCAST_FILTERING_ADDRESSES 256
 
 /**
  * struct iwl_mcast_filter_cmd - configure multicast filter.
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 9a27f57c5e98..01b58fcd8913 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -755,26 +755,109 @@ static int iwl_mvm_mac_config(struct ieee80211_hw *hw, u32 changed)
 	return 0;
 }
 
+struct iwl_mvm_mc_iter_data {
+	struct iwl_mvm *mvm;
+	int port_id;
+};
+
+static void iwl_mvm_mc_iface_iterator(void *_data, u8 *mac,
+				      struct ieee80211_vif *vif)
+{
+	struct iwl_mvm_mc_iter_data *data = _data;
+	struct iwl_mvm *mvm = data->mvm;
+	struct iwl_mcast_filter_cmd *cmd = mvm->mcast_filter_cmd;
+	int ret, len;
+
+	/* if we don't have free ports, mcast frames will be dropped */
+	if (WARN_ON_ONCE(data->port_id >= MAX_PORT_ID_NUM))
+		return;
+
+	if (vif->type != NL80211_IFTYPE_STATION ||
+	    !vif->bss_conf.assoc)
+		return;
+
+	cmd->port_id = data->port_id++;
+	memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN);
+	len = roundup(sizeof(*cmd) + cmd->count * ETH_ALEN, 4);
+
+	ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, len, cmd);
+	if (ret)
+		IWL_ERR(mvm, "mcast filter cmd error. ret=%d\n", ret);
+}
+
+static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
+{
+	struct iwl_mvm_mc_iter_data iter_data = {
+		.mvm = mvm,
+	};
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (WARN_ON_ONCE(!mvm->mcast_filter_cmd))
+		return;
+
+	ieee80211_iterate_active_interfaces(
+		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+		iwl_mvm_mc_iface_iterator, &iter_data);
+}
+
+static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
+				     struct netdev_hw_addr_list *mc_list)
+{
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	struct iwl_mcast_filter_cmd *cmd;
+	struct netdev_hw_addr *addr;
+	int addr_count = netdev_hw_addr_list_count(mc_list);
+	bool pass_all = false;
+	int len;
+
+	if (addr_count > MAX_MCAST_FILTERING_ADDRESSES) {
+		pass_all = true;
+		addr_count = 0;
+	}
+
+	len = roundup(sizeof(*cmd) + addr_count * ETH_ALEN, 4);
+	cmd = kzalloc(len, GFP_ATOMIC);
+	if (!cmd)
+		return 0;
+
+	if (pass_all) {
+		cmd->pass_all = 1;
+		return (u64)(unsigned long)cmd;
+	}
+
+	netdev_hw_addr_list_for_each(addr, mc_list) {
+		IWL_DEBUG_MAC80211(mvm, "mcast addr (%d): %pM\n",
+				   cmd->count, addr->addr);
+		memcpy(&cmd->addr_list[cmd->count * ETH_ALEN],
+		       addr->addr, ETH_ALEN);
+		cmd->count++;
+	}
+
+	return (u64)(unsigned long)cmd;
+}
+
 static void iwl_mvm_configure_filter(struct ieee80211_hw *hw,
 				     unsigned int changed_flags,
 				     unsigned int *total_flags,
 				     u64 multicast)
 {
-	*total_flags = 0;
-}
+	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+	struct iwl_mcast_filter_cmd *cmd = (void *)(unsigned long)multicast;
 
-static int iwl_mvm_configure_mcast_filter(struct iwl_mvm *mvm,
-					  struct ieee80211_vif *vif)
-{
-	struct iwl_mcast_filter_cmd mcast_filter_cmd = {
-		.pass_all = 1,
-	};
+	mutex_lock(&mvm->mutex);
 
-	memcpy(mcast_filter_cmd.bssid, vif->bss_conf.bssid, ETH_ALEN);
+	/* replace previous configuration */
+	kfree(mvm->mcast_filter_cmd);
+	mvm->mcast_filter_cmd = cmd;
 
-	return iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC,
-				    sizeof(mcast_filter_cmd),
-				    &mcast_filter_cmd);
+	if (!cmd)
+		goto out;
+
+	iwl_mvm_recalc_multicast(mvm);
+out:
+	mutex_unlock(&mvm->mutex);
+	*total_flags = 0;
 }
 
 static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
@@ -797,7 +880,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 				IWL_ERR(mvm, "failed to update quotas\n");
 				return;
 			}
-			iwl_mvm_configure_mcast_filter(mvm, vif);
 
 			if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART,
 				     &mvm->status)) {
@@ -841,6 +923,8 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 				IWL_ERR(mvm, "failed to update quotas\n");
 		}
 
+		iwl_mvm_recalc_multicast(mvm);
+
 		/* reset rssi values */
 		mvmvif->bf_data.ave_beacon_signal = 0;
 
@@ -1764,6 +1848,7 @@ struct ieee80211_ops iwl_mvm_hw_ops = {
 	.add_interface = iwl_mvm_mac_add_interface,
 	.remove_interface = iwl_mvm_mac_remove_interface,
 	.config = iwl_mvm_mac_config,
+	.prepare_multicast = iwl_mvm_prepare_multicast,
 	.configure_filter = iwl_mvm_configure_filter,
 	.bss_info_changed = iwl_mvm_bss_info_changed,
 	.hw_scan = iwl_mvm_mac_hw_scan,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 7295f8e42f3e..4275720aa151 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -488,6 +488,7 @@ struct iwl_mvm {
 	/* Scan status, cmd (pre-allocated) and auxiliary station */
 	enum iwl_scan_status scan_status;
 	struct iwl_scan_cmd *scan_cmd;
+	struct iwl_mcast_filter_cmd *mcast_filter_cmd;
 
 	/* rx chain antennas set through debugfs for the scan command */
 	u8 scan_rx_ant;
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 2e9af9f55796..668525f4ef77 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -495,6 +495,8 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	ieee80211_unregister_hw(mvm->hw);
 
 	kfree(mvm->scan_cmd);
+	kfree(mvm->mcast_filter_cmd);
+	mvm->mcast_filter_cmd = NULL;
 
 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_IWLWIFI_DEBUGFS)
 	kfree(mvm->d3_resume_sram);
-- 
cgit v1.2.3


From dcbc3e1a3b543a85f265fe099acdc57b182ceaa3 Mon Sep 17 00:00:00 2001
From: Eliad Peller
Date: Thu, 31 Oct 2013 14:31:25 +0200
Subject: iwlwifi: mvm: configure phy_ctxt with min_def

Configure the phy context to the minimum required
bandwidth, given by ctx->min_def.

Tuning to a narrower bandwidth should reduce the
noise level and consume less power.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 01b58fcd8913..fbd3114d5554 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1608,7 +1608,7 @@ static int iwl_mvm_add_chanctx(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	ret = iwl_mvm_phy_ctxt_changed(mvm, phy_ctxt, &ctx->def,
+	ret = iwl_mvm_phy_ctxt_changed(mvm, phy_ctxt, &ctx->min_def,
 				       ctx->rx_chains_static,
 				       ctx->rx_chains_dynamic);
 	if (ret) {
@@ -1652,7 +1652,7 @@ static void iwl_mvm_change_chanctx(struct ieee80211_hw *hw,
 		return;
 
 	mutex_lock(&mvm->mutex);
-	iwl_mvm_phy_ctxt_changed(mvm, phy_ctxt, &ctx->def,
+	iwl_mvm_phy_ctxt_changed(mvm, phy_ctxt, &ctx->min_def,
 				 ctx->rx_chains_static,
 				 ctx->rx_chains_dynamic);
 	iwl_mvm_bt_coex_vif_change(mvm);
-- 
cgit v1.2.3


From 8b206d198c06a741ffb455af9013d25ac9174a2b Mon Sep 17 00:00:00 2001
From: Johannes Berg
Date: Wed, 4 Dec 2013 11:56:58 +0100
Subject: iwlwifi: mvm: clarify smps_requests documentation

The documentation for smps_requests is unclear, rewrite it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4275720aa151..84edf3649ad2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -273,8 +273,8 @@ struct iwl_mvm_vif_bf_data {
  * @bcast_sta: station used for broadcast packets. Used by the following
  *  vifs: P2P_DEVICE, GO and AP.
  * @beacon_skb: the skb used to hold the AP/GO beacon template
- * @smps_requests: the requests of of differents parts of the driver, regard
-	the desired smps mode.
+ * @smps_requests: the SMPS requests of differents parts of the driver,
+ *	combined on update to yield the overall request to mac80211.
  */
 struct iwl_mvm_vif {
 	u16 id;
-- 
cgit v1.2.3


From a4082843674000ffc5db76c2d0e66455ca5af490 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Sun, 24 Nov 2013 19:10:46 +0200
Subject: iwlwifi: trans: divide stop_hw into stop_device/op_mode_leave

The stop_hw trans callback is not well defined. It is missing in many
cleanup flows and the division of labor between stop_device/stop_hw
is cumbersome. Remove stop_hw and use stop_device to perform both.
Implement this for all current transports.

PCIE needs some extra configuration the op-mode is leaving to configure
RF kill. Expose this explicitly as a new op_mode_leave trans callback.
Take the call to stop_device outside iwl_run_mvm_init_ucode, this
makes more sense and WARN when we want to run the INIT firmware while
it has run already.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/mac80211.c |  6 ----
 drivers/net/wireless/iwlwifi/dvm/main.c     |  4 +--
 drivers/net/wireless/iwlwifi/iwl-trans.h    | 25 +++++++--------
 drivers/net/wireless/iwlwifi/mvm/fw.c       | 24 ++++++++------
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  2 --
 drivers/net/wireless/iwlwifi/mvm/ops.c      |  9 ++----
 drivers/net/wireless/iwlwifi/mvm/tt.c       |  2 +-
 drivers/net/wireless/iwlwifi/pcie/trans.c   | 50 +++++++++++++----------------
 8 files changed, 55 insertions(+), 67 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index 217f1ca321a0..9f4239d31c08 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -322,12 +322,6 @@ static void iwlagn_mac_stop(struct ieee80211_hw *hw)
 
 	flush_workqueue(priv->workqueue);
 
-	/* User space software may expect getting rfkill changes
-	 * even if interface is down, trans->down will leave the RF
-	 * kill interrupt enabled
-	 */
-	iwl_trans_stop_hw(priv->trans, false);
-
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index 7aad766865cf..fd9f6cf96cfd 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1313,7 +1313,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	}
 
 	/* Reset chip to save power until we load uCode during "up". */
-	iwl_trans_stop_hw(priv->trans, false);
+	iwl_trans_stop_device(priv->trans);
 
 	priv->nvm_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg,
 						  priv->eeprom_blob,
@@ -1458,7 +1458,7 @@ static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
 
 	dev_kfree_skb(priv->beacon_skb);
 
-	iwl_trans_stop_hw(priv->trans, true);
+	iwl_trans_op_mode_leave(priv->trans);
 	ieee80211_free_hw(priv->hw);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 143292b4dbbf..43ea1249d1bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -100,8 +100,7 @@
  *	   start_fw
  *
  *	5) Then when finished (or reset):
- *	   stop_fw (a.k.a. stop device for the moment)
- *	   stop_hw
+ *	   stop_device
  *
  *	6) Eventually, the free function will be called.
  */
@@ -361,9 +360,7 @@ struct iwl_trans;
  *
  * @start_hw: starts the HW- from that point on, the HW can send interrupts
  *	May sleep
- * @stop_hw: stops the HW- from that point on, the HW will be in low power but
- *	will still issue interrupt if the HW RF kill is triggered unless
- *	op_mode_leaving is true.
+ * @op_mode_leave: Turn off the HW RF kill indication if on
  *	May sleep
  * @start_fw: allocates and inits all the resources for the transport
  *	layer. Also kick a fw image.
@@ -371,8 +368,11 @@ struct iwl_trans;
  * @fw_alive: called when the fw sends alive notification. If the fw provides
  *	the SCD base address in SRAM, then provide it here, or 0 otherwise.
  *	May sleep
- * @stop_device:stops the whole device (embedded CPU put to reset)
- *	May sleep
+ * @stop_device: stops the whole device (embedded CPU put to reset) and stops
+ *	the HW. From that point on, the HW will be in low power but will still
+ *	issue interrupt if the HW RF kill is triggered. This callback must do
+ *	the right thing and not crash even if start_hw() was called but not
+ *	start_fw(). May sleep
  * @d3_suspend: put the device into the correct mode for WoWLAN during
  *	suspend. This is optional, if not implemented WoWLAN will not be
  *	supported. This callback may sleep.
@@ -418,7 +418,7 @@ struct iwl_trans;
 struct iwl_trans_ops {
 
 	int (*start_hw)(struct iwl_trans *iwl_trans);
-	void (*stop_hw)(struct iwl_trans *iwl_trans, bool op_mode_leaving);
+	void (*op_mode_leave)(struct iwl_trans *iwl_trans);
 	int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
 			bool run_in_rfkill);
 	void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
@@ -540,15 +540,14 @@ static inline int iwl_trans_start_hw(struct iwl_trans *trans)
 	return trans->ops->start_hw(trans);
 }
 
-static inline void iwl_trans_stop_hw(struct iwl_trans *trans,
-				     bool op_mode_leaving)
+static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
 {
 	might_sleep();
 
-	trans->ops->stop_hw(trans, op_mode_leaving);
+	if (trans->ops->op_mode_leave)
+		trans->ops->op_mode_leave(trans);
 
-	if (op_mode_leaving)
-		trans->op_mode = NULL;
+	trans->op_mode = NULL;
 
 	trans->state = IWL_TRANS_NO_FW;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index b2bfa732a594..27ba104a3540 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -241,7 +241,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (mvm->init_ucode_complete)
+	if (WARN_ON_ONCE(mvm->init_ucode_complete))
 		return 0;
 
 	iwl_init_notification_wait(&mvm->notif_wait,
@@ -287,7 +287,8 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 		IWL_DEBUG_RF_KILL(mvm,
 				  "jump over all phy activities due to RF kill\n");
 		iwl_remove_notification(&mvm->notif_wait, &calib_wait);
-		return 1;
+		ret = 1;
+		goto out;
 	}
 
 	/* Send TX valid antennas before triggering calibrations */
@@ -319,9 +320,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 error:
 	iwl_remove_notification(&mvm->notif_wait, &calib_wait);
 out:
-	if (!iwlmvm_mod_params.init_dbg) {
-		iwl_trans_stop_device(mvm->trans);
-	} else if (!mvm->nvm_data) {
+	if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
 		/* we want to debug INIT and we have no NVM - fake */
 		mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
 					sizeof(struct ieee80211_channel) +
@@ -370,11 +369,16 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 				ret = -ERFKILL;
 			goto error;
 		}
-		/* should stop & start HW since that INIT image just loaded */
-		iwl_trans_stop_hw(mvm->trans, false);
-		ret = iwl_trans_start_hw(mvm->trans);
-		if (ret)
-			return ret;
+		if (!iwlmvm_mod_params.init_dbg) {
+			/*
+			 * should stop and start HW since that INIT
+			 * image just loaded
+			 */
+			iwl_trans_stop_device(mvm->trans);
+			ret = iwl_trans_start_hw(mvm->trans);
+			if (ret)
+				return ret;
+		}
 	}
 
 	if (iwlmvm_mod_params.init_dbg)
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index fbd3114d5554..272aabd25cb8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -405,7 +405,6 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac,
 static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 {
 	iwl_trans_stop_device(mvm->trans);
-	iwl_trans_stop_hw(mvm->trans, false);
 
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
 
@@ -477,7 +476,6 @@ static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
 	cancel_work_sync(&mvm->roc_done_wk);
 
 	iwl_trans_stop_device(mvm->trans);
-	iwl_trans_stop_hw(mvm->trans, false);
 
 	iwl_mvm_async_handlers_purge(mvm);
 	/* async_handlers_list is empty and will stay empty: HW is stopped */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 668525f4ef77..a6f4be8d03d7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -436,16 +436,13 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 		mutex_lock(&mvm->mutex);
 		err = iwl_run_init_mvm_ucode(mvm, true);
+		iwl_trans_stop_device(trans);
 		mutex_unlock(&mvm->mutex);
 		/* returns 0 if successful, 1 if success but in rfkill */
 		if (err < 0 && !iwlmvm_mod_params.init_dbg) {
 			IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", err);
 			goto out_free;
 		}
-
-		/* Stop the hw after the ALIVE and NVM has been read */
-		if (!iwlmvm_mod_params.init_dbg)
-			iwl_trans_stop_hw(mvm->trans, false);
 	}
 
 	scan_size = sizeof(struct iwl_scan_cmd) +
@@ -478,7 +475,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	iwl_phy_db_free(mvm->phy_db);
 	kfree(mvm->scan_cmd);
 	if (!iwlwifi_mod_params.nvm_file)
-		iwl_trans_stop_hw(trans, true);
+		iwl_trans_op_mode_leave(trans);
 	ieee80211_free_hw(mvm->hw);
 	return NULL;
 }
@@ -502,7 +499,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	kfree(mvm->d3_resume_sram);
 #endif
 
-	iwl_trans_stop_hw(mvm->trans, true);
+	iwl_trans_op_mode_leave(mvm->trans);
 
 	iwl_phy_db_free(mvm->phy_db);
 	mvm->phy_db = NULL;
diff --git a/drivers/net/wireless/iwlwifi/mvm/tt.c b/drivers/net/wireless/iwlwifi/mvm/tt.c
index 18be04da8e3f..a0ec7b3473bd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tt.c
@@ -340,7 +340,7 @@ static void check_exit_ctkill(struct work_struct *work)
 
 	iwl_trans_start_hw(mvm->trans);
 	temp = check_nic_temperature(mvm);
-	iwl_trans_stop_hw(mvm->trans, false);
+	iwl_trans_stop_device(mvm->trans);
 
 	if (temp < MIN_TEMPERATURE || temp > MAX_TEMPERATURE) {
 		IWL_DEBUG_TEMP(mvm, "Failed to measure NIC temperature\n");
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index cde9c16f6e4f..43eed4d8a52a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -641,6 +641,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	unsigned long flags;
+	bool hw_rfkill;
 
 	/* tell the device to stop sending interrupts */
 	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
@@ -681,8 +682,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	iwl_disable_interrupts(trans);
 	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 
-	iwl_enable_rfkill_int(trans);
-
 	/* stop and reset the on-board processor */
 	iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 
@@ -692,6 +691,25 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
 	clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
 	clear_bit(STATUS_RFKILL, &trans_pcie->status);
+
+	/*
+	 * Even if we stop the HW, we still want the RF kill
+	 * interrupt
+	 */
+	iwl_enable_rfkill_int(trans);
+
+	/*
+	 * Check again since the RF kill state may have changed while
+	 * all the interrupts were disabled, in this case we couldn't
+	 * receive the RF kill interrupt and update the state in the
+	 * op_mode.
+	 */
+	hw_rfkill = iwl_is_rfkill_set(trans);
+	if (hw_rfkill)
+		set_bit(STATUS_RFKILL, &trans_pcie->status);
+	else
+		clear_bit(STATUS_RFKILL, &trans_pcie->status);
+	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 }
 
 static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test)
@@ -806,13 +824,12 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 	return 0;
 }
 
-static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans,
-				   bool op_mode_leaving)
+static void iwl_trans_pcie_op_mode_leave(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	bool hw_rfkill;
 	unsigned long flags;
 
+	/* disable interrupts - don't enable HW RF kill interrupt */
 	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
 	iwl_disable_interrupts(trans);
 	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
@@ -824,27 +841,6 @@ static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans,
 	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 
 	iwl_pcie_disable_ict(trans);
-
-	if (!op_mode_leaving) {
-		/*
-		 * Even if we stop the HW, we still want the RF kill
-		 * interrupt
-		 */
-		iwl_enable_rfkill_int(trans);
-
-		/*
-		 * Check again since the RF kill state may have changed while
-		 * all the interrupts were disabled, in this case we couldn't
-		 * receive the RF kill interrupt and update the state in the
-		 * op_mode.
-		 */
-		hw_rfkill = iwl_is_rfkill_set(trans);
-		if (hw_rfkill)
-			set_bit(STATUS_RFKILL, &trans_pcie->status);
-		else
-			clear_bit(STATUS_RFKILL, &trans_pcie->status);
-		iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
-	}
 }
 
 static void iwl_trans_pcie_write8(struct iwl_trans *trans, u32 ofs, u8 val)
@@ -1457,7 +1453,7 @@ static int iwl_trans_pcie_dbgfs_register(struct iwl_trans *trans,
 
 static const struct iwl_trans_ops trans_ops_pcie = {
 	.start_hw = iwl_trans_pcie_start_hw,
-	.stop_hw = iwl_trans_pcie_stop_hw,
+	.op_mode_leave = iwl_trans_pcie_op_mode_leave,
 	.fw_alive = iwl_trans_pcie_fw_alive,
 	.start_fw = iwl_trans_pcie_start_fw,
 	.stop_device = iwl_trans_pcie_stop_device,
-- 
cgit v1.2.3


From eb7ff77edd391f215deee3ee5d957c857121cd72 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Sun, 1 Dec 2013 12:30:38 +0200
Subject: iwlwifi: trans: use a unified transport status

The same bits are employed in all transport layers. Put the status
field in the common transport layer. This allows us to employ them
in common transport code.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 20 ++++++++++++++
 drivers/net/wireless/iwlwifi/pcie/internal.h | 29 +++-----------------
 drivers/net/wireless/iwlwifi/pcie/rx.c       | 27 +++++++++----------
 drivers/net/wireless/iwlwifi/pcie/trans.c    | 40 ++++++++++++----------------
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 30 +++++++++------------
 5 files changed, 65 insertions(+), 81 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 43ea1249d1bb..64196037ce9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -316,6 +316,24 @@ enum iwl_d3_status {
 	IWL_D3_STATUS_RESET,
 };
 
+/**
+ * enum iwl_trans_status: transport status flags
+ * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
+ * @STATUS_DEVICE_ENABLED: APM is enabled
+ * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
+ * @STATUS_INT_ENABLED: interrupts are enabled
+ * @STATUS_RFKILL: the HW RFkill switch is in KILL position
+ * @STATUS_FW_ERROR: the fw is in error state
+ */
+enum iwl_trans_status {
+	STATUS_SYNC_HCMD_ACTIVE,
+	STATUS_DEVICE_ENABLED,
+	STATUS_TPOWER_PMI,
+	STATUS_INT_ENABLED,
+	STATUS_RFKILL,
+	STATUS_FW_ERROR,
+};
+
 /**
  * struct iwl_trans_config - transport configuration
  *
@@ -479,6 +497,7 @@ enum iwl_trans_state {
  * @ops - pointer to iwl_trans_ops
  * @op_mode - pointer to the op_mode
  * @cfg - pointer to the configuration
+ * @status: a bit-mask of transport status flags
  * @dev - pointer to struct device * that represents the device
  * @hw_id: a u32 with the ID of the device / subdevice.
  *	Set during transport allocation.
@@ -499,6 +518,7 @@ struct iwl_trans {
 	struct iwl_op_mode *op_mode;
 	const struct iwl_cfg *cfg;
 	enum iwl_trans_state state;
+	unsigned long status;
 
 	struct device *dev;
 	u32 hw_rev;
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 051268c037b1..8a2de33df48b 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -256,7 +256,6 @@ iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
  * @hw_base: pci hardware address support
  * @ucode_write_complete: indicates that the ucode has been copied.
  * @ucode_write_waitq: wait queue for uCode load
- * @status - transport specific status flags
  * @cmd_queue - command queue number
  * @rx_buf_size_8k: 8 kB RX buffer size
  * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes)
@@ -296,7 +295,6 @@ struct iwl_trans_pcie {
 	wait_queue_head_t ucode_write_waitq;
 	wait_queue_head_t wait_command_queue;
 
-	unsigned long status;
 	u8 cmd_queue;
 	u8 cmd_fifo;
 	u8 n_no_reclaim_cmds;
@@ -315,24 +313,6 @@ struct iwl_trans_pcie {
 	spinlock_t reg_lock;
 };
 
-/**
- * enum iwl_pcie_status: status of the PCIe transport
- * @STATUS_HCMD_ACTIVE: a SYNC command is being processed
- * @STATUS_DEVICE_ENABLED: APM is enabled
- * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
- * @STATUS_INT_ENABLED: interrupts are enabled
- * @STATUS_RFKILL: the HW RFkill switch is in KILL position
- * @STATUS_FW_ERROR: the fw is in error state
- */
-enum iwl_pcie_status {
-	STATUS_HCMD_ACTIVE,
-	STATUS_DEVICE_ENABLED,
-	STATUS_TPOWER_PMI,
-	STATUS_INT_ENABLED,
-	STATUS_RFKILL,
-	STATUS_FW_ERROR,
-};
-
 #define IWL_TRANS_GET_PCIE_TRANS(_iwl_trans) \
 	((struct iwl_trans_pcie *) ((_iwl_trans)->trans_specific))
 
@@ -399,8 +379,7 @@ void iwl_pcie_dump_csr(struct iwl_trans *trans);
 ******************************************************/
 static inline void iwl_disable_interrupts(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	clear_bit(STATUS_INT_ENABLED, &trans_pcie->status);
+	clear_bit(STATUS_INT_ENABLED, &trans->status);
 
 	/* disable interrupts from uCode/NIC to host */
 	iwl_write32(trans, CSR_INT_MASK, 0x00000000);
@@ -417,7 +396,7 @@ static inline void iwl_enable_interrupts(struct iwl_trans *trans)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
 	IWL_DEBUG_ISR(trans, "Enabling interrupts\n");
-	set_bit(STATUS_INT_ENABLED, &trans_pcie->status);
+	set_bit(STATUS_INT_ENABLED, &trans->status);
 	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
 }
 
@@ -479,9 +458,7 @@ static inline bool iwl_is_rfkill_set(struct iwl_trans *trans)
 
 static inline void iwl_nic_error(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-
-	set_bit(STATUS_FW_ERROR, &trans_pcie->status);
+	set_bit(STATUS_FW_ERROR, &trans->status);
 	iwl_op_mode_nic_error(trans->op_mode);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 1d6bf7b98e2d..bbbb3ca400d7 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -162,11 +162,8 @@ static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans,
 		rxq->write_actual = (rxq->write & ~0x7);
 		iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual);
 	} else {
-		struct iwl_trans_pcie *trans_pcie =
-			IWL_TRANS_GET_PCIE_TRANS(trans);
-
 		/* If power-saving is in use, make sure device is awake */
-		if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
+		if (test_bit(STATUS_TPOWER_PMI, &trans->status)) {
 			reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
 
 			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
@@ -222,7 +219,7 @@ static void iwl_pcie_rxq_restock(struct iwl_trans *trans)
 	 * stopped, we cannot access the HW (in particular not prph).
 	 * So don't try to restock if the APM has been already stopped.
 	 */
-	if (!test_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status))
+	if (!test_bit(STATUS_DEVICE_ENABLED, &trans->status))
 		return;
 
 	spin_lock_irqsave(&rxq->lock, flags);
@@ -791,7 +788,7 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 			     APMS_CLK_VAL_MRB_FUNC_MODE) ||
 	     (iwl_read_prph(trans, APMG_PS_CTRL_REG) &
 			    APMG_PS_CTRL_VAL_RESET_REQ))) {
-		clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
+		clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 		iwl_op_mode_wimax_active(trans->op_mode);
 		wake_up(&trans_pcie->wait_command_queue);
 		return;
@@ -801,8 +798,8 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 	iwl_dump_fh(trans, NULL);
 
 	/* set the ERROR bit before we wake up the caller */
-	set_bit(STATUS_FW_ERROR, &trans_pcie->status);
-	clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
+	set_bit(STATUS_FW_ERROR, &trans->status);
+	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 	wake_up(&trans_pcie->wait_command_queue);
 
 	local_bh_disable();
@@ -894,14 +891,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 
 		iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 		if (hw_rfkill) {
-			set_bit(STATUS_RFKILL, &trans_pcie->status);
-			if (test_and_clear_bit(STATUS_HCMD_ACTIVE,
-					       &trans_pcie->status))
+			set_bit(STATUS_RFKILL, &trans->status);
+			if (test_and_clear_bit(STATUS_SYNC_HCMD_ACTIVE,
+					       &trans->status))
 				IWL_DEBUG_RF_KILL(trans,
 						  "Rfkill while SYNC HCMD in flight\n");
 			wake_up(&trans_pcie->wait_command_queue);
 		} else {
-			clear_bit(STATUS_RFKILL, &trans_pcie->status);
+			clear_bit(STATUS_RFKILL, &trans->status);
 		}
 
 		handled |= CSR_INT_BIT_RF_KILL;
@@ -1005,7 +1002,7 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 
 	/* Re-enable all interrupts */
 	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status))
+	if (test_bit(STATUS_INT_ENABLED, &trans->status))
 		iwl_enable_interrupts(trans);
 	/* Re-enable RF_KILL if it occurred */
 	else if (handled & CSR_INT_BIT_RF_KILL)
@@ -1160,7 +1157,7 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data)
 		 * the handler can be scheduled because of a previous
 		 * interrupt.
 		 */
-		if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) &&
+		if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
 		    !trans_pcie->inta)
 			iwl_enable_interrupts(trans);
 		return IRQ_NONE;
@@ -1290,7 +1287,7 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data)
 	/* re-enable interrupts here since we don't have anything to service.
 	 * only Re-enable if disabled by irq.
 	 */
-	if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) &&
+	if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
 	    !trans_pcie->inta)
 		iwl_enable_interrupts(trans);
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 43eed4d8a52a..28c62a57ae59 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -150,7 +150,6 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans)
  */
 static int iwl_pcie_apm_init(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	int ret = 0;
 	IWL_DEBUG_INFO(trans, "Init card's basic functions\n");
 
@@ -223,7 +222,7 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
 	/* Clear the interrupt in APMG if the NIC is in RFKILL */
 	iwl_write_prph(trans, APMG_RTC_INT_STT_REG, APMG_RTC_INT_STT_RFKILL);
 
-	set_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
+	set_bit(STATUS_DEVICE_ENABLED, &trans->status);
 
 out:
 	return ret;
@@ -249,10 +248,9 @@ static int iwl_pcie_apm_stop_master(struct iwl_trans *trans)
 
 static void iwl_pcie_apm_stop(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	IWL_DEBUG_INFO(trans, "Stop card, put in low power state\n");
 
-	clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
+	clear_bit(STATUS_DEVICE_ENABLED, &trans->status);
 
 	/* Stop device's DMA activity */
 	iwl_pcie_apm_stop_master(trans);
@@ -582,7 +580,6 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans,
 static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
 				   const struct fw_img *fw, bool run_in_rfkill)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	int ret;
 	bool hw_rfkill;
 
@@ -592,16 +589,16 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
 		return -EIO;
 	}
 
-	clear_bit(STATUS_FW_ERROR, &trans_pcie->status);
+	clear_bit(STATUS_FW_ERROR, &trans->status);
 
 	iwl_enable_rfkill_int(trans);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	hw_rfkill = iwl_is_rfkill_set(trans);
 	if (hw_rfkill)
-		set_bit(STATUS_RFKILL, &trans_pcie->status);
+		set_bit(STATUS_RFKILL, &trans->status);
 	else
-		clear_bit(STATUS_RFKILL, &trans_pcie->status);
+		clear_bit(STATUS_RFKILL, &trans->status);
 	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 	if (hw_rfkill && !run_in_rfkill)
 		return -ERFKILL;
@@ -658,7 +655,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	 * restart. So don't process again if the device is
 	 * already dead.
 	 */
-	if (test_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status)) {
+	if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
 		iwl_pcie_tx_stop(trans);
 		iwl_pcie_rx_stop(trans);
 
@@ -686,11 +683,11 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 
 	/* clear all status bits */
-	clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
-	clear_bit(STATUS_INT_ENABLED, &trans_pcie->status);
-	clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
-	clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
-	clear_bit(STATUS_RFKILL, &trans_pcie->status);
+	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
+	clear_bit(STATUS_INT_ENABLED, &trans->status);
+	clear_bit(STATUS_DEVICE_ENABLED, &trans->status);
+	clear_bit(STATUS_TPOWER_PMI, &trans->status);
+	clear_bit(STATUS_RFKILL, &trans->status);
 
 	/*
 	 * Even if we stop the HW, we still want the RF kill
@@ -706,9 +703,9 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	 */
 	hw_rfkill = iwl_is_rfkill_set(trans);
 	if (hw_rfkill)
-		set_bit(STATUS_RFKILL, &trans_pcie->status);
+		set_bit(STATUS_RFKILL, &trans->status);
 	else
-		clear_bit(STATUS_RFKILL, &trans_pcie->status);
+		clear_bit(STATUS_RFKILL, &trans->status);
 	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 }
 
@@ -794,7 +791,6 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
 
 static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	bool hw_rfkill;
 	int err;
 
@@ -816,9 +812,9 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
 
 	hw_rfkill = iwl_is_rfkill_set(trans);
 	if (hw_rfkill)
-		set_bit(STATUS_RFKILL, &trans_pcie->status);
+		set_bit(STATUS_RFKILL, &trans->status);
 	else
-		clear_bit(STATUS_RFKILL, &trans_pcie->status);
+		clear_bit(STATUS_RFKILL, &trans->status);
 	iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
 
 	return 0;
@@ -924,12 +920,10 @@ void iwl_trans_pcie_free(struct iwl_trans *trans)
 
 static void iwl_trans_pcie_set_pmi(struct iwl_trans *trans, bool state)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-
 	if (state)
-		set_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
+		set_bit(STATUS_TPOWER_PMI, &trans->status);
 	else
-		clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
+		clear_bit(STATUS_TPOWER_PMI, &trans->status);
 }
 
 static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent,
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index a4ef5cc11100..a36884e993db 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -300,10 +300,8 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq)
 		iwl_write32(trans, HBUS_TARG_WRPTR,
 			    txq->q.write_ptr | (txq_id << 8));
 	} else {
-		struct iwl_trans_pcie *trans_pcie =
-			IWL_TRANS_GET_PCIE_TRANS(trans);
 		/* if we're trying to save power */
-		if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
+		if (test_bit(STATUS_TPOWER_PMI, &trans->status)) {
 			/* wake up nic if it's powered down ...
 			 * uCode will wake up, and interrupt us again, so next
 			 * time we'll skip this part. */
@@ -1449,12 +1447,12 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans,
 	iwl_pcie_cmdq_reclaim(trans, txq_id, index);
 
 	if (!(meta->flags & CMD_ASYNC)) {
-		if (!test_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) {
+		if (!test_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status)) {
 			IWL_WARN(trans,
 				 "HCMD_ACTIVE already clear for command %s\n",
 				 get_cmd_string(trans_pcie, cmd->hdr.cmd));
 		}
-		clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
+		clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 		IWL_DEBUG_INFO(trans, "Clearing HCMD_ACTIVE for command %s\n",
 			       get_cmd_string(trans_pcie, cmd->hdr.cmd));
 		wake_up(&trans_pcie->wait_command_queue);
@@ -1499,8 +1497,8 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 	IWL_DEBUG_INFO(trans, "Attempting to send sync command %s\n",
 		       get_cmd_string(trans_pcie, cmd->id));
 
-	if (WARN(test_and_set_bit(STATUS_HCMD_ACTIVE,
-				  &trans_pcie->status),
+	if (WARN(test_and_set_bit(STATUS_SYNC_HCMD_ACTIVE,
+				  &trans->status),
 		 "Command %s: a command is already active!\n",
 		 get_cmd_string(trans_pcie, cmd->id)))
 		return -EIO;
@@ -1511,7 +1509,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 	cmd_idx = iwl_pcie_enqueue_hcmd(trans, cmd);
 	if (cmd_idx < 0) {
 		ret = cmd_idx;
-		clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
+		clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 		IWL_ERR(trans,
 			"Error sending %s: enqueue_hcmd failed: %d\n",
 			get_cmd_string(trans_pcie, cmd->id), ret);
@@ -1523,8 +1521,8 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 
 		timeout -= COMMAND_POKE_TIMEOUT;
 		ret = wait_event_timeout(trans_pcie->wait_command_queue,
-					 !test_bit(STATUS_HCMD_ACTIVE,
-						   &trans_pcie->status),
+					 !test_bit(STATUS_SYNC_HCMD_ACTIVE,
+						   &trans->status),
 					 COMMAND_POKE_TIMEOUT);
 		if (ret)
 			break;
@@ -1552,7 +1550,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 		IWL_ERR(trans, "Current CMD queue read_ptr %d write_ptr %d\n",
 			q->read_ptr, q->write_ptr);
 
-		clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
+		clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 		IWL_DEBUG_INFO(trans, "Clearing HCMD_ACTIVE for command %s\n",
 			       get_cmd_string(trans_pcie, cmd->id));
 		ret = -ETIMEDOUT;
@@ -1562,7 +1560,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 		goto cancel;
 	}
 
-	if (test_bit(STATUS_FW_ERROR, &trans_pcie->status)) {
+	if (test_bit(STATUS_FW_ERROR, &trans->status)) {
 		IWL_ERR(trans, "FW error in SYNC CMD %s\n",
 			get_cmd_string(trans_pcie, cmd->id));
 		dump_stack();
@@ -1571,7 +1569,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 	}
 
 	if (!(cmd->flags & CMD_SEND_IN_RFKILL) &&
-	    test_bit(STATUS_RFKILL, &trans_pcie->status)) {
+	    test_bit(STATUS_RFKILL, &trans->status)) {
 		IWL_DEBUG_RF_KILL(trans, "RFKILL in SYNC CMD... no rsp\n");
 		ret = -ERFKILL;
 		goto cancel;
@@ -1608,13 +1606,11 @@ cancel:
 
 int iwl_trans_pcie_send_hcmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-
-	if (test_bit(STATUS_FW_ERROR, &trans_pcie->status))
+	if (test_bit(STATUS_FW_ERROR, &trans->status))
 		return -EIO;
 
 	if (!(cmd->flags & CMD_SEND_IN_RFKILL) &&
-	    test_bit(STATUS_RFKILL, &trans_pcie->status)) {
+	    test_bit(STATUS_RFKILL, &trans->status)) {
 		IWL_DEBUG_RF_KILL(trans, "Dropping CMD 0x%x: RF KILL\n",
 				  cmd->id);
 		return -ERFKILL;
-- 
cgit v1.2.3


From 3fc07953bae891c6adb08ef594cc9c527804c9c3 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Sun, 1 Dec 2013 13:02:18 +0200
Subject: iwlwifi: trans: prevent tx and cmds during FW error

Stop Tx and commands from arriving to the transport layer when a FW
error has occurred. A HW recovery should take place before. Remove
transport specific checks of the same nature (note that not all
transports were protected).

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 6 ++++++
 drivers/net/wireless/iwlwifi/pcie/tx.c   | 3 ---
 2 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 64196037ce9b..c71519d54402 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -620,6 +620,9 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
 {
 	int ret;
 
+	if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
+		return -EIO;
+
 	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) {
 		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
 		return -EIO;
@@ -659,6 +662,9 @@ static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
 			       struct iwl_device_cmd *dev_cmd, int queue)
 {
+	if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
+		return -EIO;
+
 	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
 		IWL_ERR(trans, "%s bad state = %d", __func__, trans->state);
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index a36884e993db..5b63948220c9 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1606,9 +1606,6 @@ cancel:
 
 int iwl_trans_pcie_send_hcmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd)
 {
-	if (test_bit(STATUS_FW_ERROR, &trans->status))
-		return -EIO;
-
 	if (!(cmd->flags & CMD_SEND_IN_RFKILL) &&
 	    test_bit(STATUS_RFKILL, &trans->status)) {
 		IWL_DEBUG_RF_KILL(trans, "Dropping CMD 0x%x: RF KILL\n",
-- 
cgit v1.2.3


From a0c38b21192c196305ea386d4830fa7b28ec08ef Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Tue, 3 Dec 2013 18:34:52 +0200
Subject: iwlwifi: mvm: rs: move rs_program_fix_rate to cleanup ifdefs

Move rs_program_fix_rate right before it's caller where we're
already in the context of an ifdef CPTCFG_MAC80211_DEBUGFS so
we can get rid of the extra ifdefs surrounding the original
location.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 46 +++++++++++++++++------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index bf6e29f5b4d0..83306a05ceaf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -504,30 +504,6 @@ static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
 	return (ant_type & valid_antenna) == ant_type;
 }
 
-#ifdef CONFIG_MAC80211_DEBUGFS
-/**
- * Program the device to use fixed rate for frame transmit
- * This is for debugging/testing only
- * once the device start use fixed rate, we need to reload the module
- * to being back the normal operation.
- */
-static void rs_program_fix_rate(struct iwl_mvm *mvm,
-				struct iwl_lq_sta *lq_sta)
-{
-	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
-	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-
-	IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n",
-		       lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
-
-	if (lq_sta->dbg_fixed_rate) {
-		rs_fill_link_cmd(NULL, NULL, lq_sta, lq_sta->dbg_fixed_rate);
-		iwl_mvm_send_lq_cmd(lq_sta->drv, &lq_sta->lq, false);
-	}
-}
-#endif
-
 static int rs_tl_turn_on_agg_for_tid(struct iwl_mvm *mvm,
 				      struct iwl_lq_sta *lq_data, u8 tid,
 				      struct ieee80211_sta *sta)
@@ -2612,6 +2588,28 @@ static int rs_pretty_print_rate(char *buf, const u32 rate)
 		       (rate & RATE_MCS_ZLF_MSK) ? "ZLF " : "");
 }
 
+/**
+ * Program the device to use fixed rate for frame transmit
+ * This is for debugging/testing only
+ * once the device start use fixed rate, we need to reload the module
+ * to being back the normal operation.
+ */
+static void rs_program_fix_rate(struct iwl_mvm *mvm,
+				struct iwl_lq_sta *lq_sta)
+{
+	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
+	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+
+	IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n",
+		       lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
+
+	if (lq_sta->dbg_fixed_rate) {
+		rs_fill_link_cmd(NULL, NULL, lq_sta, lq_sta->dbg_fixed_rate);
+		iwl_mvm_send_lq_cmd(lq_sta->drv, &lq_sta->lq, false);
+	}
+}
+
 static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
 			const char __user *user_buf, size_t count, loff_t *ppos)
 {
-- 
cgit v1.2.3


From 03b67e982c1738625e23fee2cc602b84ed67e222 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach
Date: Sun, 8 Dec 2013 10:38:20 +0200
Subject: iwlwifi: remove pointer to transport from op_mode

This pointer was not used anywhere.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-op-mode.h | 4 +---
 drivers/net/wireless/iwlwifi/mvm/ops.c     | 1 -
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index 976448a57d02..f50e6c62ebc5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -155,14 +155,12 @@ void iwl_opmode_deregister(const char *name);
 
 /**
  * struct iwl_op_mode - operational mode
+ * @ops - pointer to its own ops
  *
  * This holds an implementation of the mac80211 / fw API.
- *
- * @ops - pointer to its own ops
  */
 struct iwl_op_mode {
 	const struct iwl_op_mode_ops *ops;
-	const struct iwl_trans *trans;
 
 	char op_mode_specific[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index a6f4be8d03d7..ef3fdcf48831 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -344,7 +344,6 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 	op_mode = hw->priv;
 	op_mode->ops = &iwl_mvm_ops;
-	op_mode->trans = trans;
 
 	mvm = IWL_OP_MODE_GET_MVM(op_mode);
 	mvm->dev = trans->dev;
-- 
cgit v1.2.3


From 8c678ed4665d9c6452279b770eb43feed32ca3e8 Mon Sep 17 00:00:00 2001
From: Eliad Peller
Date: Mon, 9 Dec 2013 13:15:02 +0200
Subject: iwlwifi: mvm: check iwl_nvm_init return value

iwl_nvm_init() return value wasn't checked in some
path, which resulted in the following panic (if
there was some issue with the nvm):

Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = d0460000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP
Modules linked in: iwlmvm(+) iwlwifi mac80211 cfg80211 compat [last unloaded: compat]
PC is at iwl_mvm_mac_setup_register+0x12c/0x460 [iwlmvm]
LR is at 0x2710
pc : [<bf50dd4c>]    lr : [<00002710>]    psr: 20800013
sp : d00cfe18  ip : 0000081e  fp : d006b908
r10: d0711408  r9 : bf532e64  r8 : d006b5bc
r7 : d01af000  r6 : bf39cefc  r5 : d006ab00  r4 : d006b5a4
r3 : 00000001  r2 : 00000000  r1 : d006a120  r0 : d006b860

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index ef3fdcf48831..a362430477a0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -427,7 +427,9 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	 * there is no need to unnecessarily power up the NIC at driver load
 	 */
 	if (iwlwifi_mod_params.nvm_file) {
-			iwl_nvm_init(mvm);
+		err = iwl_nvm_init(mvm);
+		if (err)
+			goto out_free;
 	} else {
 		err = iwl_trans_start_hw(mvm->trans);
 		if (err)
-- 
cgit v1.2.3


From 2a988e98085a76c1a238442e67e53874944cb353 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Sun, 1 Dec 2013 13:50:40 +0200
Subject: iwlwifi: trans: prevent reprobe on repeated FW errors before restart

In case a sync command timeouts or Tx is stuck while a FW error
interrupt arrives, we might call iwl_op_mode_nic_error twice before
a restart has been initiated. This will cause a reprobe. Unify calls
to this function at the transport level and only call it on the first
FW error in a given by checking the transport FW error flag.

While at it, remove the privately defined iwl_nic_error from PCIE code
and use the common callback instead.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 11 +++++++++++
 drivers/net/wireless/iwlwifi/pcie/internal.h |  6 ------
 drivers/net/wireless/iwlwifi/pcie/rx.c       | 12 ++++++------
 drivers/net/wireless/iwlwifi/pcie/tx.c       |  6 +++---
 4 files changed, 20 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index c71519d54402..fa495bafa4e2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -70,6 +70,7 @@
 #include "iwl-debug.h"
 #include "iwl-config.h"
 #include "iwl-fw.h"
+#include "iwl-op-mode.h"
 
 /**
  * DOC: Transport layer - what is it ?
@@ -805,6 +806,16 @@ iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
 	__release(nic_access);
 }
 
+static inline void iwl_trans_fw_error(struct iwl_trans *trans)
+{
+	if (WARN_ON_ONCE(!trans->op_mode))
+		return;
+
+	/* prevent double restarts due to the same erroneous FW */
+	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
+		iwl_op_mode_nic_error(trans->op_mode);
+}
+
 /*****************************************************
 * driver (transport) register/unregister functions
 ******************************************************/
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index 8a2de33df48b..674c75b0d002 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -456,10 +456,4 @@ static inline bool iwl_is_rfkill_set(struct iwl_trans *trans)
 		CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
 }
 
-static inline void iwl_nic_error(struct iwl_trans *trans)
-{
-	set_bit(STATUS_FW_ERROR, &trans->status);
-	iwl_op_mode_nic_error(trans->op_mode);
-}
-
 #endif /* __iwl_trans_int_pcie_h__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index bbbb3ca400d7..7aeec5ccefa5 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -797,14 +797,14 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 	iwl_pcie_dump_csr(trans);
 	iwl_dump_fh(trans, NULL);
 
-	/* set the ERROR bit before we wake up the caller */
-	set_bit(STATUS_FW_ERROR, &trans->status);
-	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
-	wake_up(&trans_pcie->wait_command_queue);
-
 	local_bh_disable();
-	iwl_nic_error(trans);
+	/* The STATUS_FW_ERROR bit is set in this function. This must happen
+	 * before we wake up the command caller, to ensure a proper cleanup. */
+	iwl_trans_fw_error(trans);
 	local_bh_enable();
+
+	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
+	wake_up(&trans_pcie->wait_command_queue);
 }
 
 irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 5b63948220c9..8df24787c141 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -207,7 +207,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data)
 		IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
 			le32_to_cpu(txq->scratchbufs[i].scratch));
 
-	iwl_nic_error(trans);
+	iwl_trans_fw_error(trans);
 }
 
 /*
@@ -1021,7 +1021,7 @@ static void iwl_pcie_cmdq_reclaim(struct iwl_trans *trans, int txq_id, int idx)
 		if (nfreed++ > 0) {
 			IWL_ERR(trans, "HCMD skipped: index (%d) %d %d\n",
 				idx, q->write_ptr, q->read_ptr);
-			iwl_nic_error(trans);
+			iwl_trans_fw_error(trans);
 		}
 	}
 
@@ -1555,7 +1555,7 @@ static int iwl_pcie_send_hcmd_sync(struct iwl_trans *trans,
 			       get_cmd_string(trans_pcie, cmd->id));
 		ret = -ETIMEDOUT;
 
-		iwl_nic_error(trans);
+		iwl_trans_fw_error(trans);
 
 		goto cancel;
 	}
-- 
cgit v1.2.3


From efbf6e3ba2ad2e0f7965ff78779ea4eea7b871e8 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Wed, 4 Dec 2013 17:08:47 +0200
Subject: iwlwifi: trans: clear FW_ERROR status in common code

Clear the FW_ERROR status before the common start_fw transport code.
Remove the transport specific clears.

After these patches the FW_ERROR flag is only set and cleared by common
transport code.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h  | 1 +
 drivers/net/wireless/iwlwifi/pcie/trans.c | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index fa495bafa4e2..8aaabdb1e4a7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -590,6 +590,7 @@ static inline int iwl_trans_start_fw(struct iwl_trans *trans,
 
 	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
 
+	clear_bit(STATUS_FW_ERROR, &trans->status);
 	return trans->ops->start_fw(trans, fw, run_in_rfkill);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 28c62a57ae59..eecd38e3f15f 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -589,8 +589,6 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
 		return -EIO;
 	}
 
-	clear_bit(STATUS_FW_ERROR, &trans->status);
-
 	iwl_enable_rfkill_int(trans);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
-- 
cgit v1.2.3


From 128cb89e1d18c8f9d1dc82446a4c3003ca0b6f7e Mon Sep 17 00:00:00 2001
From: Arik Nemtsov
Date: Thu, 5 Dec 2013 18:31:45 +0200
Subject: iwlwifi: trans: turn set_pmi into an optional callback

It is not currently implemented for SDIO, and not required for other slave
buses as well.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 8aaabdb1e4a7..0c3647858909 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -787,7 +787,8 @@ static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
 
 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
 {
-	trans->ops->set_pmi(trans, state);
+	if (trans->ops->set_pmi)
+		trans->ops->set_pmi(trans, state);
 }
 
 static inline void
-- 
cgit v1.2.3


From 752096727cdec42c2fa91242dbc341c8f360e167 Mon Sep 17 00:00:00 2001
From: Alexander Bondar
Date: Tue, 12 Nov 2013 14:47:59 +0200
Subject: iwlwifi: mvm: Add and examine TLV flag for P2P client uAPSD support

Current firmware doesn't handle well uAPSD in P2P Client.
When it will be fixed, the firmware will set a TLV flag to notify
the driver that uAPSD is supported in P2P client mode.
Check this flag when sending power command for P2P client.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw.h    | 2 ++
 drivers/net/wireless/iwlwifi/mvm/power.c | 4 ++++
 2 files changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 959562d9f55c..8704e3042ca1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -94,6 +94,7 @@
  *	containing CAM (Continuous Active Mode) indication.
  * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
  *	single bound interface).
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
  */
 enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_PAN			= BIT(0),
@@ -117,6 +118,7 @@ enum iwl_ucode_tlv_flag {
 	IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD	= BIT(20),
 	IWL_UCODE_TLV_FLAGS_P2P_PS		= BIT(21),
 	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
+	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
 };
 
 /* The default calibrate table size if not specified by firmware file */
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index d173ea27417e..483ecc67501f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -358,6 +358,10 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm,
 	if (!memcmp(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
 		    ETH_ALEN))
 		allow_uapsd = false;
+
+	if (vif->p2p &&
+	    !(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD))
+		allow_uapsd = false;
 	/*
 	 * Avoid using uAPSD if P2P client is associated to GO that uses
 	 * opportunistic power save. This is due to current FW limitation.
-- 
cgit v1.2.3


From 8fc7c58c037b1793b07aa3111d125b36f31f5681 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Wed, 4 Dec 2013 02:15:46 +0200
Subject: iwlwifi: mvm: rs: refactor building the LQ command

Simplify the code a bit more by extracting the rates table
building logic into a separate function and handle setting
a fixed rate for debug in a separate flow.
Also avoid using and saving ucode rate format in different
places. Instead use rs_rate struct and convert to ucode format
only when filling the rates table in the LQ command.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 185 +++++++++++++++-------------------
 drivers/net/wireless/iwlwifi/mvm/rs.h |   1 -
 2 files changed, 82 insertions(+), 104 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 83306a05ceaf..eee3381048b2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -351,20 +351,12 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 				   struct sk_buff *skb,
 				   struct ieee80211_sta *sta,
 				   struct iwl_lq_sta *lq_sta);
-static void rs_fill_link_cmd(struct iwl_mvm *mvm,
-			     struct ieee80211_sta *sta,
-			     struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
+static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
+			   struct ieee80211_sta *sta,
+			   struct iwl_lq_sta *lq_sta,
+			   const struct rs_rate *initial_rate);
 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
 
-#ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags);
-#else
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags)
-{}
-#endif
-
 /**
  * The following tables contain the expected throughput metrics for all rates
  *
@@ -634,7 +626,7 @@ static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
 
 /* Convert rs_rate object into ucode rate bitmask */
 static u32 ucode_rate_from_rs_rate(struct iwl_mvm *mvm,
-				   struct rs_rate *rate)
+				  struct rs_rate *rate)
 {
 	u32 ucode_rate = 0;
 	int index = rate->index;
@@ -761,8 +753,7 @@ static int rs_rate_from_ucode_rate(const u32 ucode_rate,
 
 /* switch to another antenna/antennas and return 1 */
 /* if no other valid antenna found, return 0 */
-static int rs_toggle_antenna(u32 valid_ant, u32 *ucode_rate,
-			     struct rs_rate *rate)
+static int rs_toggle_antenna(u32 valid_ant, struct rs_rate *rate)
 {
 	u8 new_ant_type;
 
@@ -783,9 +774,6 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *ucode_rate,
 
 	rate->ant = new_ant_type;
 
-	/* TODO: get rid of ucode_rate here. This should handle only rs_rate */
-	*ucode_rate &= ~RATE_MCS_ANT_ABC_MSK;
-	*ucode_rate |= new_ant_type << RATE_MCS_ANT_POS;
 	return 1;
 }
 
@@ -859,9 +847,9 @@ static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask,
 	return (high << 8) | low;
 }
 
-static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
-			     struct rs_rate *rate,
-			     u8 scale_index, u8 ht_possible)
+static void rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
+			      struct rs_rate *rate,
+			      u8 scale_index, u8 ht_possible)
 {
 	s32 low;
 	u16 rate_mask;
@@ -917,7 +905,6 @@ static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 
 out:
 	rate->index = low;
-	return ucode_rate_from_rs_rate(lq_sta->drv, rate);
 }
 
 /* Simple function to compare two rate scale table types */
@@ -1447,10 +1434,7 @@ static void rs_update_rate_tbl(struct iwl_mvm *mvm,
 			       struct iwl_lq_sta *lq_sta,
 			       struct rs_rate *rate)
 {
-	u32 ucode_rate;
-
-	ucode_rate = ucode_rate_from_rs_rate(mvm, rate);
-	rs_fill_link_cmd(mvm, sta, lq_sta, ucode_rate);
+	rs_fill_lq_cmd(mvm, sta, lq_sta, rate);
 	iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false);
 }
 
@@ -1610,10 +1594,6 @@ static int rs_switch_to_column(struct iwl_mvm *mvm,
 		rate->index = rate_idx;
 	}
 
-	/* TODO: remove current_rate and keep using rs_rate all the way until
-	 * we need to fill in the rs_table in the LQ command
-	 */
-	search_tbl->current_rate = ucode_rate_from_rs_rate(mvm, rate);
 	IWL_DEBUG_RATE(mvm, "Switched to column %d: Index %d\n",
 		       col_id, rate->index);
 
@@ -1730,9 +1710,6 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 			rate->type = LQ_NONE;
 			lq_sta->search_better_tbl = 0;
 			tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-			/* get "active" rate info */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-			tbl->rate.index = index;
 			rs_update_rate_tbl(mvm, sta, lq_sta, &tbl->rate);
 		}
 		return;
@@ -1823,7 +1800,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 			tbl = &(lq_sta->lq_info[active_tbl]);
 
 			/* Revert to "active" rate and throughput info */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+			index = tbl->rate.index;
 			current_tpt = lq_sta->last_tpt;
 
 			/* Need to set up a new rate table in uCode */
@@ -2029,11 +2006,11 @@ lq_update:
 				rs_rate_scale_clear_window(&(tbl->win[i]));
 
 			/* Use new "search" start rate */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+			index = tbl->rate.index;
 
 			rs_dump_rate(mvm, &tbl->rate,
 				     "Switch to SEARCH TABLE:");
-			rs_fill_link_cmd(mvm, sta, lq_sta, tbl->current_rate);
+			rs_fill_lq_cmd(mvm, sta, lq_sta, &tbl->rate);
 			iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false);
 		} else {
 			done_search = 1;
@@ -2071,8 +2048,6 @@ lq_update:
 	}
 
 out:
-	tbl->rate.index = index;
-	tbl->current_rate = ucode_rate_from_rs_rate(mvm, &tbl->rate);
 	lq_sta->last_txrate_idx = index;
 }
 
@@ -2099,7 +2074,6 @@ static void rs_initialize_lq(struct iwl_mvm *mvm,
 	struct iwl_scale_tbl_info *tbl;
 	struct rs_rate *rate;
 	int i;
-	u32 ucode_rate;
 	u8 active_tbl = 0;
 	u8 valid_tx_ant;
 
@@ -2130,9 +2104,6 @@ static void rs_initialize_lq(struct iwl_mvm *mvm,
 	else
 		rate->type = LQ_LEGACY_G;
 
-	ucode_rate = ucode_rate_from_rs_rate(mvm, rate);
-	tbl->current_rate = ucode_rate;
-
 	WARN_ON_ONCE(rate->ant != ANT_A && rate->ant != ANT_B);
 	if (rate->ant == ANT_A)
 		tbl->column = RS_COLUMN_LEGACY_ANT_A;
@@ -2140,7 +2111,7 @@ static void rs_initialize_lq(struct iwl_mvm *mvm,
 		tbl->column = RS_COLUMN_LEGACY_ANT_B;
 
 	rs_set_expected_tpt_table(lq_sta, tbl);
-	rs_fill_link_cmd(NULL, NULL, lq_sta, ucode_rate);
+	rs_fill_lq_cmd(NULL, NULL, lq_sta, rate);
 	/* TODO restore station should remember the lq cmd */
 	iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, init);
 }
@@ -2371,9 +2342,32 @@ static void rs_rate_update(void *mvm_r,
 	iwl_mvm_rs_rate_init(mvm, sta, sband->band, false);
 }
 
-static void rs_fill_link_cmd(struct iwl_mvm *mvm,
-			     struct ieee80211_sta *sta,
-			     struct iwl_lq_sta *lq_sta, u32 new_rate)
+#ifdef CONFIG_MAC80211_DEBUGFS
+static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm,
+					    struct iwl_lq_cmd *lq_cmd,
+					    enum ieee80211_band band,
+					    u32 ucode_rate)
+{
+	struct rs_rate rate;
+	int i;
+	int num_rates = ARRAY_SIZE(lq_cmd->rs_table);
+	__le32 ucode_rate_le32 = cpu_to_le32(ucode_rate);
+
+	for (i = 0; i < num_rates; i++)
+		lq_cmd->rs_table[i] = ucode_rate_le32;
+
+	rs_rate_from_ucode_rate(ucode_rate, band, &rate);
+
+	if (is_mimo(&rate))
+		lq_cmd->mimo_delim = num_rates - 1;
+	else
+		lq_cmd->mimo_delim = 0;
+}
+#endif /* CONFIG_MAC80211_DEBUGFS */
+
+static void rs_build_rates_table(struct iwl_mvm *mvm,
+				 struct iwl_lq_sta *lq_sta,
+				 const struct rs_rate *initial_rate)
 {
 	struct rs_rate rate;
 	int index = 0;
@@ -2383,10 +2377,13 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm,
 	u8 valid_tx_ant = 0;
 	struct iwl_lq_cmd *lq_cmd = &lq_sta->lq;
 
-	/* Override starting rate (index 0) if needed for debug purposes */
-	rs_dbgfs_set_mcs(lq_sta, &new_rate);
+	memcpy(&rate, initial_rate, sizeof(struct rs_rate));
+
+	lq_cmd->mimo_delim = is_mimo(&rate) ? 1 : 0;
 
-	rs_rate_from_ucode_rate(new_rate, lq_sta->band, &rate);
+	/* Fill 1st table entry (index 0) */
+	lq_cmd->rs_table[index] = cpu_to_le32(
+		ucode_rate_from_rs_rate(mvm, &rate));
 
 	/* How many times should we repeat the initial rate? */
 	if (is_legacy(&rate)) {
@@ -2397,15 +2394,6 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm,
 				  LINK_QUAL_AGG_DISABLE_START_DEF - 1);
 	}
 
-	lq_cmd->mimo_delim = is_mimo(&rate) ? 1 : 0;
-
-	/* Fill 1st table entry (index 0) */
-	lq_cmd->rs_table[index] = cpu_to_le32(new_rate);
-
-	if (num_of_ant(rate.ant) == 1)
-		lq_cmd->single_stream_ant_msk = rate.ant;
-	/* otherwise we don't modify the existing value */
-
 	index++;
 	repeat_rate--;
 	if (mvm)
@@ -2421,23 +2409,17 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm,
 				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
 					ant_toggle_cnt++;
 				else if (mvm &&
-					 rs_toggle_antenna(valid_tx_ant,
-							&new_rate, &rate))
+					 rs_toggle_antenna(valid_tx_ant, &rate))
 					ant_toggle_cnt = 1;
 			}
 
-			/* Override next rate if needed for debug purposes */
-			rs_dbgfs_set_mcs(lq_sta, &new_rate);
-
 			/* Fill next table entry */
-			lq_cmd->rs_table[index] =
-					cpu_to_le32(new_rate);
+			lq_cmd->rs_table[index] = cpu_to_le32(
+				ucode_rate_from_rs_rate(mvm, &rate));
 			repeat_rate--;
 			index++;
 		}
 
-		rs_rate_from_ucode_rate(new_rate, lq_sta->band, &rate);
-
 		/* Indicate to uCode which entries might be MIMO.
 		 * If initial rate was MIMO, this will finally end up
 		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
@@ -2445,16 +2427,14 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm,
 			lq_cmd->mimo_delim = index;
 
 		/* Get next rate */
-		new_rate = rs_get_lower_rate(lq_sta, &rate, rate.index,
-					     use_ht_possible);
+		rs_get_lower_rate(lq_sta, &rate, rate.index, use_ht_possible);
 
 		/* How many times should we repeat the next rate? */
 		if (is_legacy(&rate)) {
 			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
 				ant_toggle_cnt++;
 			else if (mvm &&
-				 rs_toggle_antenna(valid_tx_ant,
-						   &new_rate, &rate))
+				 rs_toggle_antenna(valid_tx_ant, &rate))
 				ant_toggle_cnt = 1;
 
 			repeat_rate = IWL_NUMBER_TRY;
@@ -2468,15 +2448,36 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm,
 		 */
 		use_ht_possible = 0;
 
-		/* Override next rate if needed for debug purposes */
-		rs_dbgfs_set_mcs(lq_sta, &new_rate);
-
 		/* Fill next table entry */
-		lq_cmd->rs_table[index] = cpu_to_le32(new_rate);
+		lq_cmd->rs_table[index] = cpu_to_le32(
+			ucode_rate_from_rs_rate(mvm, &rate));
 
 		index++;
 		repeat_rate--;
 	}
+}
+
+static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
+			   struct ieee80211_sta *sta,
+			   struct iwl_lq_sta *lq_sta,
+			   const struct rs_rate *initial_rate)
+{
+	struct iwl_lq_cmd *lq_cmd = &lq_sta->lq;
+	u8 ant = initial_rate->ant;
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+	if (lq_sta->dbg_fixed_rate) {
+		rs_build_rates_table_from_fixed(mvm, lq_cmd,
+						lq_sta->band,
+						lq_sta->dbg_fixed_rate);
+		ant = (lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >>
+			RATE_MCS_ANT_POS;
+	} else
+#endif
+		rs_build_rates_table(mvm, lq_sta, initial_rate);
+
+	if (num_of_ant(ant) == 1)
+		lq_cmd->single_stream_ant_msk = ant;
 
 	lq_cmd->agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	lq_cmd->agg_disable_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
@@ -2510,31 +2511,6 @@ static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta,
 }
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags)
-{
-	struct iwl_mvm *mvm;
-	u8 valid_tx_ant;
-	u8 ant_sel_tx;
-
-	mvm = lq_sta->drv;
-	valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw);
-	if (lq_sta->dbg_fixed_rate) {
-		ant_sel_tx =
-		  ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
-		  >> RATE_MCS_ANT_POS);
-		if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
-			*rate_n_flags = lq_sta->dbg_fixed_rate;
-		} else {
-			lq_sta->dbg_fixed_rate = 0;
-			IWL_ERR(mvm,
-				"Invalid antenna selection 0x%X, Valid is 0x%X\n",
-				ant_sel_tx, valid_tx_ant);
-			IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n");
-		}
-	}
-}
-
 static int rs_pretty_print_rate(char *buf, const u32 rate)
 {
 
@@ -2605,7 +2581,10 @@ static void rs_program_fix_rate(struct iwl_mvm *mvm,
 		       lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
 
 	if (lq_sta->dbg_fixed_rate) {
-		rs_fill_link_cmd(NULL, NULL, lq_sta, lq_sta->dbg_fixed_rate);
+		struct rs_rate rate;
+		rs_rate_from_ucode_rate(lq_sta->dbg_fixed_rate,
+					lq_sta->band, &rate);
+		rs_fill_lq_cmd(NULL, NULL, lq_sta, &rate);
 		iwl_mvm_send_lq_cmd(lq_sta->drv, &lq_sta->lq, false);
 	}
 }
@@ -2739,14 +2718,14 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
 		rate = &tbl->rate;
 		desc += sprintf(buff+desc,
 				"%s type=%d SGI=%d BW=%s DUP=0\n"
-				"rate=0x%X\n",
+				"index=%d\n",
 				lq_sta->active_tbl == i ? "*" : "x",
 				rate->type,
 				rate->sgi,
 				is_ht20(rate) ? "20Mhz" :
 				is_ht40(rate) ? "40Mhz" :
 				is_ht80(rate) ? "80Mhz" : "ERR",
-				tbl->current_rate);
+				rate->index);
 		for (j = 0; j < IWL_RATE_COUNT; j++) {
 			desc += sprintf(buff+desc,
 				"counter=%d success=%d %%=%d\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index b32960796384..7b26e6568a60 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -278,7 +278,6 @@ struct iwl_scale_tbl_info {
 	struct rs_rate rate;
 	enum rs_column column;
 	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
-	u32 current_rate;  /* rate_n_flags, uCode API format */
 	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
 };
 
-- 
cgit v1.2.3


From ca6f38ff4b17855692a920493aca6af50a8c2ffd Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Mon, 9 Dec 2013 11:14:11 +0200
Subject: iwlwifi: mvm: rs: avoid recalc of supported legacy rate mask

The supported legacy rate mask is initialized when rs
is initialized based on the remote peer supported rates.
There's no need to re mask it repeatedly with the supported
remote peer rates.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 36 ++---------------------------------
 drivers/net/wireless/iwlwifi/mvm/rs.h |  1 -
 2 files changed, 2 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index eee3381048b2..30470d48aaa3 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -880,16 +880,6 @@ static void rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 
 	rate_mask = rs_get_supported_rates(lq_sta, rate);
 
-	/* Mask with station rate restriction */
-	if (is_legacy(rate)) {
-		/* supp_rates has no CCK bits in A mode */
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			rate_mask = (u16)(rate_mask &
-			   (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
-	}
-
 	/* If we switched from HT to legacy, check current rate */
 	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
 		low = scale_index;
@@ -1629,7 +1619,6 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	u16 rate_mask;
 	u8 update_lq = 0;
 	struct iwl_scale_tbl_info *tbl, *tbl1;
-	u16 rate_scale_index_msk = 0;
 	u8 active_tbl = 0;
 	u8 done_search = 0;
 	u16 high_low;
@@ -1646,8 +1635,6 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
-	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
-
 	tid = rs_get_tid(lq_sta, hdr);
 	if ((tid != IWL_MAX_TID_COUNT) &&
 	    (lq_sta->tx_agg_tid_en & (1 << tid))) {
@@ -1686,24 +1673,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	/* rates available for this association, and for modulation mode */
 	rate_mask = rs_get_supported_rates(lq_sta, rate);
 
-	/* mask with station rate restriction */
-	if (is_legacy(rate)) {
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			/* supp_rates has no CCK bits in A mode */
-			rate_scale_index_msk = (u16) (rate_mask &
-				(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_scale_index_msk = (u16) (rate_mask &
-						      lq_sta->supp_rates);
-
-	} else {
-		rate_scale_index_msk = rate_mask;
-	}
-
-	if (!rate_scale_index_msk)
-		rate_scale_index_msk = rate_mask;
-
-	if (!((BIT(index) & rate_scale_index_msk))) {
+	if (!(BIT(index) & rate_mask)) {
 		IWL_ERR(mvm, "Current Rate is not valid\n");
 		if (lq_sta->search_better_tbl) {
 			/* revert to active table if search table is not valid*/
@@ -1816,8 +1786,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 
 	/* (Else) not in search of better modulation mode, try for better
 	 * starting rate, while staying in this mode. */
-	high_low = rs_get_adjacent_rate(mvm, index, rate_scale_index_msk,
-					rate->type);
+	high_low = rs_get_adjacent_rate(mvm, index, rate_mask, rate->type);
 	low = high_low & 0xff;
 	high = (high_low >> 8) & 0xff;
 
@@ -2253,7 +2222,6 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
 
 	lq_sta->flush_timer = 0;
-	lq_sta->supp_rates = sta->supp_rates[sband->band];
 
 	IWL_DEBUG_RATE(mvm,
 		       "LQ: *** rate scale station global init for station %d ***\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index 7b26e6568a60..c31aa59728ea 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -314,7 +314,6 @@ struct iwl_lq_sta {
 	enum ieee80211_band band;
 
 	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-	u32 supp_rates;
 	u16 active_legacy_rate;
 	u16 active_siso_rate;
 	u16 active_mimo2_rate;
-- 
cgit v1.2.3


From e07be6d3fe0d7e3aa53ff294a2c9f83fb8355a64 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Mon, 9 Dec 2013 13:02:56 +0200
Subject: iwlwifi: mvm: rs: improve rates table algo

The new logic will attempt more rates with less retries
per rate. Also when starting off with MIMO it will
fallback to SISO with the same MCS and only then to Legacy.
Previously we fell back directly to Legacy.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 254 ++++++++++++++++++++--------------
 1 file changed, 151 insertions(+), 103 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 30470d48aaa3..bc8603254219 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -42,9 +42,16 @@
 
 #define RS_NAME "iwl-mvm-rs"
 
-#define NUM_TRY_BEFORE_ANT_TOGGLE 1
-#define IWL_NUMBER_TRY      1
-#define IWL_HT_NUMBER_TRY   3
+#define NUM_TRY_BEFORE_ANT_TOGGLE       1
+#define RS_LEGACY_RETRIES_PER_RATE      1
+#define RS_HT_VHT_RETRIES_PER_RATE      2
+#define RS_HT_VHT_RETRIES_PER_RATE_TW   1
+#define RS_INITIAL_MIMO_NUM_RATES       3
+#define RS_INITIAL_SISO_NUM_RATES       3
+#define RS_INITIAL_LEGACY_NUM_RATES     LINK_QUAL_MAX_RETRY_NUM
+#define RS_SECONDARY_LEGACY_NUM_RATES   LINK_QUAL_MAX_RETRY_NUM
+#define RS_SECONDARY_SISO_NUM_RATES     3
+#define RS_SECONDARY_SISO_RETRIES       1
 
 #define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */
 #define IWL_RATE_MIN_FAILURE_TH		3	/* min failures to calc tpt */
@@ -847,54 +854,73 @@ static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask,
 	return (high << 8) | low;
 }
 
-static void rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
-			      struct rs_rate *rate,
-			      u8 scale_index, u8 ht_possible)
+static inline bool rs_rate_supported(struct iwl_lq_sta *lq_sta,
+				     struct rs_rate *rate)
 {
-	s32 low;
-	u16 rate_mask;
+	return BIT(rate->index) & rs_get_supported_rates(lq_sta, rate);
+}
+
+/* Get the next supported lower rate in the current column.
+ * Return true if bottom rate in the current column was reached
+ */
+static bool rs_get_lower_rate_in_column(struct iwl_lq_sta *lq_sta,
+					struct rs_rate *rate)
+{
+	u8 low;
 	u16 high_low;
-	u8 switch_to_legacy = 0;
+	u16 rate_mask;
+	struct iwl_mvm *mvm = lq_sta->drv;
+
+	rate_mask = rs_get_supported_rates(lq_sta, rate);
+	high_low = rs_get_adjacent_rate(mvm, rate->index, rate_mask,
+					rate->type);
+	low = high_low & 0xff;
+
+	/* Bottom rate of column reached */
+	if (low == IWL_RATE_INVALID)
+		return true;
+
+	rate->index = low;
+	return false;
+}
+
+/* Get the next rate to use following a column downgrade */
+static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta,
+					  struct rs_rate *rate)
+{
 	struct iwl_mvm *mvm = lq_sta->drv;
 
-	/* check if we need to switch from HT to legacy rates.
-	 * assumption is that mandatory rates (1Mbps or 6Mbps)
-	 * are always supported (spec demand) */
-	if (!is_legacy(rate) && (!ht_possible || !scale_index)) {
-		switch_to_legacy = 1;
-		WARN_ON_ONCE(scale_index < IWL_RATE_MCS_0_INDEX &&
-			     scale_index > IWL_RATE_MCS_9_INDEX);
-		scale_index = rs_ht_to_legacy[scale_index];
+	if (is_legacy(rate)) {
+		/* No column to downgrade from Legacy */
+		return;
+	} else if (is_siso(rate)) {
+		/* Downgrade to Legacy if we were in SISO */
 		if (lq_sta->band == IEEE80211_BAND_5GHZ)
 			rate->type = LQ_LEGACY_A;
 		else
 			rate->type = LQ_LEGACY_G;
 
-		if (num_of_ant(rate->ant) > 1)
-			rate->ant =
-			    first_antenna(iwl_fw_valid_tx_ant(mvm->fw));
-
 		rate->bw = RATE_MCS_CHAN_WIDTH_20;
-		rate->sgi = false;
-	}
 
-	rate_mask = rs_get_supported_rates(lq_sta, rate);
+		WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX &&
+			     rate->index > IWL_RATE_MCS_9_INDEX);
 
-	/* If we switched from HT to legacy, check current rate */
-	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
-		low = scale_index;
-		goto out;
+		rate->index = rs_ht_to_legacy[rate->index];
+	} else {
+		/* Downgrade to SISO with same MCS if in MIMO  */
+		rate->type = is_vht_mimo2(rate) ?
+			LQ_VHT_SISO : LQ_HT_SISO;
 	}
 
-	high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
-					rate->type);
-	low = high_low & 0xff;
 
-	if (low == IWL_RATE_INVALID)
-		low = scale_index;
+	if (num_of_ant(rate->ant) > 1)
+		rate->ant = first_antenna(iwl_fw_valid_tx_ant(mvm->fw));
 
-out:
-	rate->index = low;
+	/* Relevant in both switching to SISO or Legacy */
+	rate->sgi = false;
+
+	if (!rs_rate_supported(lq_sta, rate))
+		rs_get_lower_rate_in_column(lq_sta, rate);
 }
 
 /* Simple function to compare two rate scale table types */
@@ -2333,96 +2359,118 @@ static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm,
 }
 #endif /* CONFIG_MAC80211_DEBUGFS */
 
+static void rs_fill_rates_for_column(struct iwl_mvm *mvm,
+				     struct iwl_lq_sta *lq_sta,
+				     struct rs_rate *rate,
+				     __le32 *rs_table, int *rs_table_index,
+				     int num_rates, int num_retries,
+				     u8 valid_tx_ant, bool toggle_ant)
+{
+	int i, j;
+	__le32 ucode_rate;
+	bool bottom_reached = false;
+	int prev_rate_idx = rate->index;
+	int end = LINK_QUAL_MAX_RETRY_NUM;
+	int index = *rs_table_index;
+
+	for (i = 0; i < num_rates && index < end; i++) {
+		ucode_rate = cpu_to_le32(ucode_rate_from_rs_rate(mvm, rate));
+		for (j = 0; j < num_retries && index < end; j++, index++)
+			rs_table[index] = ucode_rate;
+
+		if (toggle_ant)
+			rs_toggle_antenna(valid_tx_ant, rate);
+
+		prev_rate_idx = rate->index;
+		bottom_reached = rs_get_lower_rate_in_column(lq_sta, rate);
+		if (bottom_reached && !is_legacy(rate))
+			break;
+	}
+
+	if (!bottom_reached)
+		rate->index = prev_rate_idx;
+
+	*rs_table_index = index;
+}
+
+/* Building the rate table is non trivial. When we're in MIMO2/VHT/80Mhz/SGI
+ * column the rate table should look like this:
+ *
+ * rate[0] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI
+ * rate[1] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI
+ * rate[2] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI
+ * rate[3] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI
+ * rate[4] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI
+ * rate[5] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI
+ * rate[6] 0x4005007 VHT | ANT: A BW: 80Mhz MCS: 7 NSS: 1 NGI
+ * rate[7] 0x4009006 VHT | ANT: B BW: 80Mhz MCS: 6 NSS: 1 NGI
+ * rate[8] 0x4005005 VHT | ANT: A BW: 80Mhz MCS: 5 NSS: 1 NGI
+ * rate[9] 0x800B Legacy | ANT: B Rate: 36 Mbps
+ * rate[10] 0x4009 Legacy | ANT: A Rate: 24 Mbps
+ * rate[11] 0x8007 Legacy | ANT: B Rate: 18 Mbps
+ * rate[12] 0x4005 Legacy | ANT: A Rate: 12 Mbps
+ * rate[13] 0x800F Legacy | ANT: B Rate: 9 Mbps
+ * rate[14] 0x400D Legacy | ANT: A Rate: 6 Mbps
+ * rate[15] 0x800D Legacy | ANT: B Rate: 6 Mbps
+ */
 static void rs_build_rates_table(struct iwl_mvm *mvm,
 				 struct iwl_lq_sta *lq_sta,
 				 const struct rs_rate *initial_rate)
 {
 	struct rs_rate rate;
-	int index = 0;
-	int repeat_rate = 0;
-	u8 ant_toggle_cnt = 0;
-	u8 use_ht_possible = 1;
+	int num_rates, num_retries, index = 0;
 	u8 valid_tx_ant = 0;
 	struct iwl_lq_cmd *lq_cmd = &lq_sta->lq;
+	bool toggle_ant = false;
 
 	memcpy(&rate, initial_rate, sizeof(struct rs_rate));
 
-	lq_cmd->mimo_delim = is_mimo(&rate) ? 1 : 0;
-
-	/* Fill 1st table entry (index 0) */
-	lq_cmd->rs_table[index] = cpu_to_le32(
-		ucode_rate_from_rs_rate(mvm, &rate));
+	if (mvm)
+		valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw);
 
-	/* How many times should we repeat the initial rate? */
-	if (is_legacy(&rate)) {
-		ant_toggle_cnt = 1;
-		repeat_rate = IWL_NUMBER_TRY;
+	if (is_siso(&rate)) {
+		num_rates = RS_INITIAL_SISO_NUM_RATES;
+		num_retries = RS_HT_VHT_RETRIES_PER_RATE;
+	} else if (is_mimo(&rate)) {
+		num_rates = RS_INITIAL_MIMO_NUM_RATES;
+		num_retries = RS_HT_VHT_RETRIES_PER_RATE;
 	} else {
-		repeat_rate = min(IWL_HT_NUMBER_TRY,
-				  LINK_QUAL_AGG_DISABLE_START_DEF - 1);
+		num_rates = RS_INITIAL_LEGACY_NUM_RATES;
+		num_retries = RS_LEGACY_RETRIES_PER_RATE;
+		toggle_ant = true;
 	}
 
-	index++;
-	repeat_rate--;
-	if (mvm)
-		valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw);
+	rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index,
+				 num_rates, num_retries, valid_tx_ant,
+				 toggle_ant);
 
-	/* Fill rest of rate table */
-	while (index < LINK_QUAL_MAX_RETRY_NUM) {
-		/* Repeat initial/next rate.
-		 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
-		 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
-		while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
-			if (is_legacy(&rate)) {
-				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-					ant_toggle_cnt++;
-				else if (mvm &&
-					 rs_toggle_antenna(valid_tx_ant, &rate))
-					ant_toggle_cnt = 1;
-			}
-
-			/* Fill next table entry */
-			lq_cmd->rs_table[index] = cpu_to_le32(
-				ucode_rate_from_rs_rate(mvm, &rate));
-			repeat_rate--;
-			index++;
-		}
+	rs_get_lower_rate_down_column(lq_sta, &rate);
 
-		/* Indicate to uCode which entries might be MIMO.
-		 * If initial rate was MIMO, this will finally end up
-		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
-		if (is_mimo(&rate))
-			lq_cmd->mimo_delim = index;
+	if (is_siso(&rate)) {
+		num_rates = RS_SECONDARY_SISO_NUM_RATES;
+		num_retries = RS_SECONDARY_SISO_RETRIES;
+	} else if (is_legacy(&rate)) {
+		num_rates = RS_SECONDARY_LEGACY_NUM_RATES;
+		num_retries = RS_LEGACY_RETRIES_PER_RATE;
+	} else {
+		WARN_ON_ONCE(1);
+	}
 
-		/* Get next rate */
-		rs_get_lower_rate(lq_sta, &rate, rate.index, use_ht_possible);
+	toggle_ant = true;
 
-		/* How many times should we repeat the next rate? */
-		if (is_legacy(&rate)) {
-			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-				ant_toggle_cnt++;
-			else if (mvm &&
-				 rs_toggle_antenna(valid_tx_ant, &rate))
-				ant_toggle_cnt = 1;
+	rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index,
+				 num_rates, num_retries, valid_tx_ant,
+				 toggle_ant);
 
-			repeat_rate = IWL_NUMBER_TRY;
-		} else {
-			repeat_rate = IWL_HT_NUMBER_TRY;
-		}
+	rs_get_lower_rate_down_column(lq_sta, &rate);
 
-		/* Don't allow HT rates after next pass.
-		 * rs_get_lower_rate() will change type to LQ_LEGACY_A
-		 * or LQ_LEGACY_G.
-		 */
-		use_ht_possible = 0;
+	num_rates = RS_SECONDARY_LEGACY_NUM_RATES;
+	num_retries = RS_LEGACY_RETRIES_PER_RATE;
 
-		/* Fill next table entry */
-		lq_cmd->rs_table[index] = cpu_to_le32(
-			ucode_rate_from_rs_rate(mvm, &rate));
+	rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index,
+				 num_rates, num_retries, valid_tx_ant,
+				 toggle_ant);
 
-		index++;
-		repeat_rate--;
-	}
 }
 
 static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
-- 
cgit v1.2.3


From 4107dbd27758ada08303cfb51db4553156870554 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Tue, 10 Dec 2013 12:20:37 +0200
Subject: iwlwifi: mvm: rs: remove unnecessary debug logs

The logs are emitted in a flow in which there were retries
and the rates in the rate table entry didn't match the active
or search table. This doesn't indicate a problem and is
expected in most cases where there will be retries for some
reason. Remove the logs.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index bc8603254219..6d0bd45b0791 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -1116,14 +1116,9 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband,
 				tmp_tbl = curr_tbl;
 			else if (rs_rate_match(&rate, &other_tbl->rate))
 				tmp_tbl = other_tbl;
-			else {
-				IWL_DEBUG_RATE(mvm,
-					       "Tx packet rate doesn't match ACTIVE or SEARCH tables\n");
-				rs_dump_rate(mvm, &rate, "Tx PACKET:");
-				rs_dump_rate(mvm, &curr_tbl->rate, "CURRENT:");
-				rs_dump_rate(mvm, &other_tbl->rate, "OTHER:");
+			else
 				continue;
-			}
+
 			rs_collect_tx_data(tmp_tbl, rate.index, 1,
 					   i < retries ? 0 : legacy_success);
 		}
-- 
cgit v1.2.3


From 4e4b815c08ce6257c15cede80b29247f1b88de04 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Wed, 11 Dec 2013 00:55:36 +0200
Subject: iwlwifi: mvm: rs: refactor rate scale action decision

Extract the scale action decision to a different function
in preparation of modifying it. While at it also convert
the scale action values from hardcoded values to a clear enum.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 186 +++++++++++++++++++---------------
 1 file changed, 103 insertions(+), 83 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 6d0bd45b0791..62b29d7f80f0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -130,6 +130,12 @@ static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = {
 	IWL_DECLARE_MCS_RATE(9),                 /* MCS 9 */
 };
 
+enum rs_action {
+	RS_ACTION_STAY = 0,
+	RS_ACTION_DOWNSCALE = -1,
+	RS_ACTION_UPSCALE = 1,
+};
+
 enum rs_column_mode {
 	RS_INVALID = 0,
 	RS_LEGACY,
@@ -1616,6 +1622,97 @@ err:
 	return -1;
 }
 
+static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm,
+					 struct iwl_scale_tbl_info *tbl,
+					 s32 sr, int low, int high,
+					 int current_tpt,
+					 int low_tpt, int high_tpt)
+{
+	enum rs_action action = RS_ACTION_STAY;
+
+	/* Too many failures, decrease rate */
+	if ((sr <= RS_SR_FORCE_DECREASE) || (current_tpt == 0)) {
+		IWL_DEBUG_RATE(mvm,
+			       "decrease rate because of low SR\n");
+		action = RS_ACTION_DOWNSCALE;
+	/* No throughput measured yet for adjacent rates; try increase. */
+	} else if ((low_tpt == IWL_INVALID_VALUE) &&
+		   (high_tpt == IWL_INVALID_VALUE)) {
+		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) {
+			IWL_DEBUG_RATE(mvm,
+				       "Good SR and no high rate measurement. "
+				       "Increase rate\n");
+			action = RS_ACTION_UPSCALE;
+		} else if (low != IWL_RATE_INVALID) {
+			IWL_DEBUG_RATE(mvm,
+				       "Remain in current rate\n");
+			action = RS_ACTION_STAY;
+		}
+	}
+
+	/* Both adjacent throughputs are measured, but neither one has better
+	 * throughput; we're using the best rate, don't change it!
+	 */
+	else if ((low_tpt != IWL_INVALID_VALUE) &&
+		 (high_tpt != IWL_INVALID_VALUE) &&
+		 (low_tpt < current_tpt) &&
+		 (high_tpt < current_tpt)) {
+		IWL_DEBUG_RATE(mvm,
+			       "Both high and low are worse. "
+			       "Maintain rate\n");
+		action = RS_ACTION_STAY;
+	}
+
+	/* At least one adjacent rate's throughput is measured,
+	 * and may have better performance.
+	 */
+	else {
+		/* Higher adjacent rate's throughput is measured */
+		if (high_tpt != IWL_INVALID_VALUE) {
+			/* Higher rate has better throughput */
+			if (high_tpt > current_tpt &&
+			    sr >= IWL_RATE_INCREASE_TH) {
+				IWL_DEBUG_RATE(mvm,
+					       "Higher rate is better and good "
+					       "SR. Increate rate\n");
+				action = RS_ACTION_UPSCALE;
+			} else {
+				IWL_DEBUG_RATE(mvm,
+					       "Higher rate isn't better OR "
+					       "no good SR. Maintain rate\n");
+				action = RS_ACTION_STAY;
+			}
+
+		/* Lower adjacent rate's throughput is measured */
+		} else if (low_tpt != IWL_INVALID_VALUE) {
+			/* Lower rate has better throughput */
+			if (low_tpt > current_tpt) {
+				IWL_DEBUG_RATE(mvm,
+					       "Lower rate is better. "
+					       "Decrease rate\n");
+				action = RS_ACTION_DOWNSCALE;
+			} else if (sr >= IWL_RATE_INCREASE_TH) {
+				IWL_DEBUG_RATE(mvm,
+					       "Lower rate isn't better and "
+					       "good SR. Increase rate\n");
+				action = RS_ACTION_UPSCALE;
+			}
+		}
+	}
+
+	/* Sanity check; asked for decrease, but success rate or throughput
+	 * has been good at old rate.  Don't change it.
+	 */
+	if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID) &&
+	    ((sr > IWL_RATE_HIGH_TH) ||
+	     (current_tpt > (100 * tbl->expected_tpt[low])))) {
+		IWL_DEBUG_RATE(mvm,
+			       "Sanity check failed. Maintain rate\n");
+		action = RS_ACTION_STAY;
+	}
+
+	return action;
+}
 
 /*
  * Do rate scaling and search for new modulation mode.
@@ -1636,7 +1733,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	int low_tpt = IWL_INVALID_VALUE;
 	int high_tpt = IWL_INVALID_VALUE;
 	u32 fail_count;
-	s8 scale_action = 0;
+	enum rs_action scale_action = RS_ACTION_STAY;
 	u16 rate_mask;
 	u8 update_lq = 0;
 	struct iwl_scale_tbl_info *tbl, *tbl1;
@@ -1830,85 +1927,8 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 		       rs_pretty_lq_type(rate->type), index, current_tpt, sr,
 		       low, high, low_tpt, high_tpt);
 
-	scale_action = 0;
-
-	/* Too many failures, decrease rate */
-	if ((sr <= RS_SR_FORCE_DECREASE) || (current_tpt == 0)) {
-		IWL_DEBUG_RATE(mvm,
-			       "decrease rate because of low SR\n");
-		scale_action = -1;
-	/* No throughput measured yet for adjacent rates; try increase. */
-	} else if ((low_tpt == IWL_INVALID_VALUE) &&
-		   (high_tpt == IWL_INVALID_VALUE)) {
-		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) {
-			IWL_DEBUG_RATE(mvm,
-				       "Good SR and no high rate measurement. "
-				       "Increase rate\n");
-			scale_action = 1;
-		} else if (low != IWL_RATE_INVALID) {
-			IWL_DEBUG_RATE(mvm,
-				       "Remain in current rate\n");
-			scale_action = 0;
-		}
-	}
-
-	/* Both adjacent throughputs are measured, but neither one has better
-	 * throughput; we're using the best rate, don't change it! */
-	else if ((low_tpt != IWL_INVALID_VALUE) &&
-		 (high_tpt != IWL_INVALID_VALUE) &&
-		 (low_tpt < current_tpt) &&
-		 (high_tpt < current_tpt)) {
-		IWL_DEBUG_RATE(mvm,
-			       "Both high and low are worse. "
-			       "Maintain rate\n");
-		scale_action = 0;
-	}
-
-	/* At least one adjacent rate's throughput is measured,
-	 * and may have better performance. */
-	else {
-		/* Higher adjacent rate's throughput is measured */
-		if (high_tpt != IWL_INVALID_VALUE) {
-			/* Higher rate has better throughput */
-			if (high_tpt > current_tpt &&
-			    sr >= IWL_RATE_INCREASE_TH) {
-				IWL_DEBUG_RATE(mvm,
-					       "Higher rate is better and good "
-					       "SR. Increate rate\n");
-				scale_action = 1;
-			} else {
-				IWL_DEBUG_RATE(mvm,
-					       "Higher rate isn't better OR "
-					       "no good SR. Maintain rate\n");
-				scale_action = 0;
-			}
-
-		/* Lower adjacent rate's throughput is measured */
-		} else if (low_tpt != IWL_INVALID_VALUE) {
-			/* Lower rate has better throughput */
-			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE(mvm,
-					       "Lower rate is better. "
-					       "Decrease rate\n");
-				scale_action = -1;
-			} else if (sr >= IWL_RATE_INCREASE_TH) {
-				IWL_DEBUG_RATE(mvm,
-					       "Lower rate isn't better and "
-					       "good SR. Increase rate\n");
-				scale_action = 1;
-			}
-		}
-	}
-
-	/* Sanity check; asked for decrease, but success rate or throughput
-	 * has been good at old rate.  Don't change it. */
-	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
-	    ((sr > IWL_RATE_HIGH_TH) ||
-	     (current_tpt > (100 * tbl->expected_tpt[low])))) {
-		IWL_DEBUG_RATE(mvm,
-			       "Sanity check failed. Maintain rate\n");
-		scale_action = 0;
-	}
+	scale_action = rs_get_rate_action(mvm, tbl, sr, low, high,
+					  current_tpt, low_tpt, high_tpt);
 
 	/* Force a search in case BT doesn't like us being in MIMO */
 	if (is_mimo(rate) &&
@@ -1920,7 +1940,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 	}
 
 	switch (scale_action) {
-	case -1:
+	case RS_ACTION_DOWNSCALE:
 		/* Decrease starting rate, update uCode's rate table */
 		if (low != IWL_RATE_INVALID) {
 			update_lq = 1;
@@ -1931,7 +1951,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 		}
 
 		break;
-	case 1:
+	case RS_ACTION_UPSCALE:
 		/* Increase starting rate, update uCode's rate table */
 		if (high != IWL_RATE_INVALID) {
 			update_lq = 1;
@@ -1942,7 +1962,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 		}
 
 		break;
-	case 0:
+	case RS_ACTION_STAY:
 		/* No change */
 	default:
 		break;
-- 
cgit v1.2.3


From c2d284d547cda117709a59dca49a1a9d08bf05e8 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach
Date: Sun, 8 Dec 2013 10:48:13 +0200
Subject: iwlwifi: mvm: fixup Makefile

debufs.o appeared twice in the Makefile. Fix that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/Makefile | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/Makefile b/drivers/net/wireless/iwlwifi/mvm/Makefile
index 3ea47ab27337..f98ec2b23898 100644
--- a/drivers/net/wireless/iwlwifi/mvm/Makefile
+++ b/drivers/net/wireless/iwlwifi/mvm/Makefile
@@ -4,7 +4,6 @@ iwlmvm-y += utils.o rx.o tx.o binding.o quota.o sta.o sf.o
 iwlmvm-y += scan.o time-event.o rs.o
 iwlmvm-y += power.o power_legacy.o bt-coex.o
 iwlmvm-y += led.o tt.o
-iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o
 iwlmvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o debugfs-vif.o
 iwlmvm-$(CONFIG_PM_SLEEP) += d3.o
 
-- 
cgit v1.2.3


From be2056fce8f7f680594ba8e28512b45c360e507e Mon Sep 17 00:00:00 2001
From: Ilan Peer
Date: Wed, 4 Dec 2013 16:47:14 +0200
Subject: iwlwifi: mvm: Do not allow AP MAC context update if not active

Fix a regression introduced in "iwlwifi: mvm: fix ht protection flags"
where an AP/IBSS MAC context could have been updated even before the
context was added to the FW. This fix avoids the following warning:

WARNING: ... at .../drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c:1132
    iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]()
Changing inactive MAC 0c:8b:fd:01:1a:30/3
Modules linked in: [...]
Call Trace:
[<c16041fd>] dump_stack+0x41/0x52
[<c1041074>] warn_slowpath_common+0x84/0xa0
[<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<c1041133>] warn_slowpath_fmt+0x33/0x40
[<f80d8f45>] iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]
[<f80d517a>] iwl_mvm_bss_info_changed+0x22a/0x4b0 [iwlmvm]
[<c160831d>] ? mutex_unlock+0xd/0x10
[<f80d4678>] ? iwl_mvm_configure_filter+0x58/0x70 [iwlmvm]
[<f80d4f50>] ? iwl_mvm_mac_tx+0xc0/0xc0 [iwlmvm]
[<f8132d83>] ieee80211_bss_info_change_notify+0xa3/0x1d0 [mac80211]
[<f8149247>] ? ieee80211_del_virtual_monitor+0x127/0x1f0 [mac80211]
[<f8149cac>] ieee80211_do_open+0x12c/0xeb0 [mac80211]
[<c106c6de>] ? __raw_notifier_call_chain+0x1e/0x30
[<c106c70f>] ? raw_notifier_call_chain+0x1f/0x30
[<f814aa8d>] ieee80211_open+0x5d/0x60 [mac80211]
[<c1500c7b>] __dev_open+0xab/0x140
[<c160b39a>] ? _raw_spin_unlock_bh+0x2a/0x30
[<c1500f41>] __dev_change_flags+0x81/0x160
[<c10ab6fc>] ? __lock_is_held+0x3c/0x60
[<c15010d1>] dev_change_flags+0x21/0x60

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reported-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 272aabd25cb8..b61d5a236ebe 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1053,11 +1053,16 @@ iwl_mvm_bss_info_changed_ap_ibss(struct iwl_mvm *mvm,
 				 struct ieee80211_bss_conf *bss_conf,
 				 u32 changes)
 {
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	enum ieee80211_bss_change ht_change = BSS_CHANGED_ERP_CTS_PROT |
 					      BSS_CHANGED_HT |
 					      BSS_CHANGED_BANDWIDTH;
 	int ret;
 
+	/* Changes will be applied when the AP/IBSS is started */
+	if (!mvmvif->ap_ibss_active)
+		return;
+
 	if (changes & ht_change) {
 		ret = iwl_mvm_mac_ctxt_changed(mvm, vif);
 		if (ret)
-- 
cgit v1.2.3


From 4623a26575847b385c7834549be4baf9f013d835 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Wed, 11 Dec 2013 09:32:28 +0200
Subject: iwlwifi: mvm: rs: disable MCS9 Tx workaround

MCS9 introduces some corner cases in the current rs
algorithm which may lead to non optimal throughput and
instability in the throughput. Until all the corner
cases are resolved disable MCS9 for Tx as a workaround
which yields better throughput results as MCS8 is much
more stable.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 62b29d7f80f0..1f06450007ba 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2207,6 +2207,10 @@ static void rs_vht_set_enabled_rates(struct ieee80211_sta *sta,
 			if (i == IWL_RATE_9M_INDEX)
 				continue;
 
+			/* Disable MCS9 as a workaround */
+			if (i == IWL_RATE_MCS_9_INDEX)
+				continue;
+
 			/* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */
 			if (i == IWL_RATE_MCS_9_INDEX &&
 			    sta->bandwidth == IEEE80211_STA_RX_BW_20)
@@ -2225,6 +2229,10 @@ static void rs_vht_set_enabled_rates(struct ieee80211_sta *sta,
 			if (i == IWL_RATE_9M_INDEX)
 				continue;
 
+			/* Disable MCS9 as a workaround */
+			if (i == IWL_RATE_MCS_9_INDEX)
+				continue;
+
 			/* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */
 			if (i == IWL_RATE_MCS_9_INDEX &&
 			    sta->bandwidth == IEEE80211_STA_RX_BW_20)
-- 
cgit v1.2.3


From 657322084df0fd0e331a55b917b93649e669b9e4 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Thu, 12 Dec 2013 15:53:14 +0200
Subject: iwlwifi: mvm: set highest rate in VHT MCS Set

Set the Tx/Rx highest long GI rates in the VHT Supported MCS Set
field according to the chip capabilties.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index ebf629bd7713..a48decc6c68f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -290,6 +290,9 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
 			    IEEE80211_VHT_MCS_NOT_SUPPORTED << 14);
 
+	/* Max rate for Long GI NSS=2 80Mhz is 780Mbps */
+	vht_cap->vht_mcs.rx_highest = cpu_to_le16(780);
+
 	if (num_ants == 1 ||
 	    cfg->rx_with_siso_diversity) {
 		vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
@@ -297,9 +300,12 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
 		/* this works because NOT_SUPPORTED == 3 */
 		vht_cap->vht_mcs.rx_mcs_map |=
 			cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << 2);
+		/* Max rate for Long GI NSS=1 80Mhz is 390Mbps */
+		vht_cap->vht_mcs.rx_highest = cpu_to_le16(390);
 	}
 
 	vht_cap->vht_mcs.tx_mcs_map = vht_cap->vht_mcs.rx_mcs_map;
+	vht_cap->vht_mcs.tx_highest = vht_cap->vht_mcs.rx_highest;
 }
 
 static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
-- 
cgit v1.2.3


From 124adcabc6133c9c7c4e4659891c7c69e57223c6 Mon Sep 17 00:00:00 2001
From: Eyal Shapira
Date: Tue, 17 Dec 2013 01:08:50 +0200
Subject: iwlwifi: mvm: rs: fix RTS protection being set indefinitely

RTS protection was turned on once aggregation was enabled but it
was never turned off. Remove turning on RTS protection in the LQ command
completely as TX_CMD_FLG_PROT_REQUIRE gets set in iwl_mvm_set_tx_cmd
for every Tx which is part of an aggregation. This would already cause
RTS protection to be used during aggregations.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c |  1 -
 drivers/net/wireless/iwlwifi/mvm/sta.c  | 13 -------------
 2 files changed, 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 5efc6d1f3512..5fb37724c096 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -109,7 +109,6 @@ static const struct iwl_base_params iwl7000_base_params = {
 
 static const struct iwl_ht_params iwl7000_ht_params = {
 	.stbc = true,
-	.use_rts_for_aggregation = true, /* use rts/cts protection */
 	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
 };
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 4ea00da54b05..0b541caf4037 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -932,19 +932,6 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	IWL_DEBUG_HT(mvm, "Tx aggregation enabled on ra = %pM tid = %d\n",
 		     sta->addr, tid);
 
-	if (mvm->cfg->ht_params->use_rts_for_aggregation) {
-		/*
-		 * switch to RTS/CTS if it is the prefer protection
-		 * method for HT traffic
-		 * this function also sends the LQ command
-		 */
-		return iwl_mvm_tx_protection(mvm, mvmsta, true);
-		/*
-		 * TODO: remove the TLC_RTS flag when we tear down the last
-		 * AGG session (agg_tids_count in DVM)
-		 */
-	}
-
 	return iwl_mvm_send_lq_cmd(mvm, &mvmsta->lq_sta.lq, false);
 }
 
-- 
cgit v1.2.3


From cf4ef65446443eb485afe9419ea82b2efbe582a7 Mon Sep 17 00:00:00 2001
From: Johannes Berg
Date: Tue, 17 Dec 2013 11:34:25 +0100
Subject: iwlwifi: mvm: rs: fix variable shadowing

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: EyalX Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/rs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 1f06450007ba..d6d28d7b442b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -2718,12 +2718,10 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 			lq_sta->lq.initial_rate_index[3]);
 
 	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
-		u32 rate = le32_to_cpu(lq_sta->lq.rs_table[i]);
-		desc += sprintf(buff+desc,
-				" rate[%d] 0x%X ",
-				i, rate);
+		u32 r = le32_to_cpu(lq_sta->lq.rs_table[i]);
 
-		desc += rs_pretty_print_rate(buff+desc, rate);
+		desc += sprintf(buff+desc, " rate[%d] 0x%X ", i, r);
+		desc += rs_pretty_print_rate(buff+desc, r);
 	}
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-- 
cgit v1.2.3


From 90accd0b4701c41a4a35c717d4f4439a9fc2b70c Mon Sep 17 00:00:00 2001
From: Michal Nazarewicz
Date: Wed, 11 Dec 2013 17:43:39 +0100
Subject: net: wirelesse: wcn36xx: pull allocation outside of critical section

Commit [3469adb3: fix potential NULL pointer dereference] introduced
a check of msg_ind allocation, but omitted allocation of msg_ind->msg.
Moreover, it introduced two if statements, which looked a bit clunky.

This commit moves allocation code outside of the critical section so
there's no need to dance around mutex_unlock, and adds the missing
allocation check.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 8f37562e0b11..750626b0e22d 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2060,22 +2060,28 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
 	case WCN36XX_HAL_OTA_TX_COMPL_IND:
 	case WCN36XX_HAL_MISSED_BEACON_IND:
 	case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
-		mutex_lock(&wcn->hal_ind_mutex);
 		msg_ind = kmalloc(sizeof(*msg_ind), GFP_KERNEL);
-		if (msg_ind) {
-			msg_ind->msg_len = len;
-			msg_ind->msg = kmalloc(len, GFP_KERNEL);
-			memcpy(msg_ind->msg, buf, len);
-			list_add_tail(&msg_ind->list, &wcn->hal_ind_queue);
-			queue_work(wcn->hal_ind_wq, &wcn->hal_ind_work);
-			wcn36xx_dbg(WCN36XX_DBG_HAL, "indication arrived\n");
+		if (!msg_ind)
+			goto nomem;
+		msg_ind->msg_len = len;
+		msg_ind->msg = kmalloc(len, GFP_KERNEL);
+		if (!msg_ind->msg) {
+			kfree(msg_ind);
+nomem:
+			/*
+			 * FIXME: Do something smarter then just
+			 * printing an error.
+			 */
+			wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
+				    msg_header->msg_type);
+			break;
 		}
+		memcpy(msg_ind->msg, buf, len);
+		mutex_lock(&wcn->hal_ind_mutex);
+		list_add_tail(&msg_ind->list, &wcn->hal_ind_queue);
+		queue_work(wcn->hal_ind_wq, &wcn->hal_ind_work);
 		mutex_unlock(&wcn->hal_ind_mutex);
-		if (msg_ind)
-			break;
-		/* FIXME: Do something smarter then just printing an error. */
-		wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
-			    msg_header->msg_type);
+		wcn36xx_dbg(WCN36XX_DBG_HAL, "indication arrived\n");
 		break;
 	default:
 		wcn36xx_err("SMD_EVENT (%d) not supported\n",
-- 
cgit v1.2.3


From 4d5504ec54d8f890e850cc6c29ee4a0e740e5a47 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:49 +0100
Subject: brcmfmac: add missing curly braces in brcmf_fws_txstatus_suppressed()

The 0-day testing from Fenguang Wu issued the following warning:

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master
head:   4b074b07625f603d40d4d04937f8874a00415dc4
commit: 1e86d69662d7d86360624f74bbe1b5fa1b8ffb13
    [33/59] brcmfmac: Update fwsignal to fix out of order tx.

>> drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1393:2-56:
    code aligned with following code on line 1394

vim +1393 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c

84bcc0c3  1387 	}
84bcc0c3  1388
84bcc0c3  1389 	entry->generation = genbit;
84bcc0c3  1390
2747e5f7  1391 	ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
2747e5f7  1392 	if (ret == 0)
1e86d696 @1393 		brcmf_skb_htod_tag_set_field(skb, GENERATION, ..
1e86d696 @1394 		brcmf_skbcb(skb)->htod_seq = seq;
1e86d696  1395 		if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) {
1e86d696  1396 			brcmf_skb_htod_seq_set_field(skb, ..
1e86d696  1397 			brcmf_skb_htod_seq_set_field(skb, ..

This warning is valid and the if statement needs curly braces here.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index e9bdfdb95d8f..a5937840f0a7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1393,7 +1393,7 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 	entry->generation = genbit;
 
 	ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb);
-	if (ret == 0)
+	if (ret == 0) {
 		brcmf_skb_htod_tag_set_field(skb, GENERATION, genbit);
 		brcmf_skbcb(skb)->htod_seq = seq;
 		if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) {
@@ -1404,6 +1404,8 @@ static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo,
 		}
 		ret = brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_SUPPRESSED, fifo,
 				    skb);
+	}
+
 	if (ret != 0) {
 		/* suppress q is full or hdrpull failed, drop this packet */
 		brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
-- 
cgit v1.2.3


From e2dc9eea531ec90f50968d2cef2ba91b4869f250 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:50 +0100
Subject: brcmfmac: combine bcmsdh source files into one

The driver has four files specific to SDIO host interface handling.
This commit reduces that by merging two closely related source files.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/Makefile   |   1 -
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 521 +++++++++++++++++++
 .../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 552 ---------------------
 3 files changed, 521 insertions(+), 553 deletions(-)
 delete mode 100644 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
index 2082402d4b63..5681b9862023 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
@@ -36,7 +36,6 @@ brcmfmac-objs += \
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
 		bcmsdh.o \
-		bcmsdh_sdmmc.o \
 		sdio_chip.o
 brcmfmac-$(CONFIG_BRCMFMAC_USB) += \
 		usb.o
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 91651ec7f13f..d7696d377cd6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -23,9 +23,17 @@
 #include <linux/completion.h>
 #include <linux/scatterlist.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/core.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/brcmfmac-sdio.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <net/cfg80211.h>
 
 #include <defs.h>
 #include <brcm_hw_ids.h>
@@ -35,6 +43,7 @@
 #include "dhd_bus.h"
 #include "dhd_dbg.h"
 #include "sdio_host.h"
+#include "sdio_chip.h"
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
@@ -797,3 +806,515 @@ void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
 	else
 		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
 }
+
+#define SDIO_VENDOR_ID_BROADCOM		0x02d0
+
+#define DMA_ALIGN_MASK	0x03
+
+#define SDIO_FUNC1_BLOCKSIZE		64
+#define SDIO_FUNC2_BLOCKSIZE		512
+
+/* devices we support, null terminated */
+static const struct sdio_device_id brcmf_sdmmc_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
+		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+	{ /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
+
+static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
+
+
+bool
+brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
+{
+	bool is_err = false;
+#ifdef CONFIG_PM_SLEEP
+	is_err = atomic_read(&sdiodev->suspend);
+#endif
+	return is_err;
+}
+
+void
+brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq)
+{
+#ifdef CONFIG_PM_SLEEP
+	int retry = 0;
+	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
+		wait_event_timeout(*wq, false, HZ/100);
+#endif
+}
+
+static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
+					    uint regaddr, u8 *byte)
+{
+	struct sdio_func *sdfunc = sdiodev->func[0];
+	int err_ret;
+
+	/*
+	 * Can only directly write to some F0 registers.
+	 * Handle F2 enable/disable and Abort command
+	 * as a special case.
+	 */
+	if (regaddr == SDIO_CCCR_IOEx) {
+		sdfunc = sdiodev->func[2];
+		if (sdfunc) {
+			if (*byte & SDIO_FUNC_ENABLE_2) {
+				/* Enable Function 2 */
+				err_ret = sdio_enable_func(sdfunc);
+				if (err_ret)
+					brcmf_err("enable F2 failed:%d\n",
+						  err_ret);
+			} else {
+				/* Disable Function 2 */
+				err_ret = sdio_disable_func(sdfunc);
+				if (err_ret)
+					brcmf_err("Disable F2 failed:%d\n",
+						  err_ret);
+			}
+		} else {
+			err_ret = -ENOENT;
+		}
+	} else if ((regaddr == SDIO_CCCR_ABORT) ||
+		   (regaddr == SDIO_CCCR_IENx)) {
+		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
+				 GFP_KERNEL);
+		if (!sdfunc)
+			return -ENOMEM;
+		sdfunc->num = 0;
+		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
+		kfree(sdfunc);
+	} else if (regaddr < 0xF0) {
+		brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
+		err_ret = -EPERM;
+	} else {
+		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
+	}
+
+	return err_ret;
+}
+
+int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func,
+			     uint regaddr, u8 *byte)
+{
+	int err_ret;
+
+	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr);
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	if (rw && func == 0) {
+		/* handle F0 separately */
+		err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte);
+	} else {
+		if (rw) /* CMD52 Write */
+			sdio_writeb(sdiodev->func[func], *byte, regaddr,
+				    &err_ret);
+		else if (func == 0) {
+			*byte = sdio_f0_readb(sdiodev->func[func], regaddr,
+					      &err_ret);
+		} else {
+			*byte = sdio_readb(sdiodev->func[func], regaddr,
+					   &err_ret);
+		}
+	}
+
+	if (err_ret) {
+		/*
+		 * SleepCSR register access can fail when
+		 * waking up the device so reduce this noise
+		 * in the logs.
+		 */
+		if (regaddr != SBSDIO_FUNC1_SLEEPCSR)
+			brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+				  rw ? "write" : "read", func, regaddr, *byte,
+				  err_ret);
+		else
+			brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+				  rw ? "write" : "read", func, regaddr, *byte,
+				  err_ret);
+	}
+	return err_ret;
+}
+
+int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
+			     uint rw, uint func, uint addr, u32 *word,
+			     uint nbytes)
+{
+	int err_ret = -EIO;
+
+	if (func == 0) {
+		brcmf_err("Only CMD52 allowed to F0\n");
+		return -EINVAL;
+	}
+
+	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
+		  rw, func, addr, nbytes);
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	if (rw) {		/* CMD52 Write */
+		if (nbytes == 4)
+			sdio_writel(sdiodev->func[func], *word, addr,
+				    &err_ret);
+		else if (nbytes == 2)
+			sdio_writew(sdiodev->func[func], (*word & 0xFFFF),
+				    addr, &err_ret);
+		else
+			brcmf_err("Invalid nbytes: %d\n", nbytes);
+	} else {		/* CMD52 Read */
+		if (nbytes == 4)
+			*word = sdio_readl(sdiodev->func[func], addr, &err_ret);
+		else if (nbytes == 2)
+			*word = sdio_readw(sdiodev->func[func], addr,
+					   &err_ret) & 0xFFFF;
+		else
+			brcmf_err("Invalid nbytes: %d\n", nbytes);
+	}
+
+	if (err_ret)
+		brcmf_err("Failed to %s word, Err: 0x%08x\n",
+			  rw ? "write" : "read", err_ret);
+
+	return err_ret;
+}
+
+static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
+{
+	/* read 24 bits and return valid 17 bit addr */
+	int i, ret;
+	u32 scratch, regdata;
+	__le32 scratch_le;
+	u8 *ptr = (u8 *)&scratch_le;
+
+	for (i = 0; i < 3; i++) {
+		regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret);
+		if (ret != 0)
+			brcmf_err("Can't read!\n");
+
+		*ptr++ = (u8) regdata;
+		regaddr++;
+	}
+
+	/* Only the lower 17-bits are valid */
+	scratch = le32_to_cpu(scratch_le);
+	scratch &= 0x0001FFFF;
+	return scratch;
+}
+
+static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)
+{
+	int err_ret;
+	u32 fbraddr;
+	u8 func;
+
+	brcmf_dbg(SDIO, "\n");
+
+	/* Get the Card's common CIS address */
+	sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev,
+							   SDIO_CCCR_CIS);
+	brcmf_dbg(SDIO, "Card's Common CIS Ptr = 0x%x\n",
+		  sdiodev->func_cis_ptr[0]);
+
+	/* Get the Card's function CIS (for each function) */
+	for (fbraddr = SDIO_FBR_BASE(1), func = 1;
+	     func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
+		sdiodev->func_cis_ptr[func] =
+		    brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr);
+		brcmf_dbg(SDIO, "Function %d CIS Ptr = 0x%x\n",
+			  func, sdiodev->func_cis_ptr[func]);
+	}
+
+	/* Enable Function 1 */
+	err_ret = sdio_enable_func(sdiodev->func[1]);
+	if (err_ret)
+		brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
+
+	return false;
+}
+
+/*
+ *	Public entry points & extern's
+ */
+int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
+{
+	int err_ret = 0;
+	struct mmc_host *host;
+	struct sdio_func *func;
+	uint max_blocks;
+
+	brcmf_dbg(SDIO, "\n");
+
+	sdiodev->num_funcs = 2;
+
+	sdio_claim_host(sdiodev->func[1]);
+
+	err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
+	if (err_ret) {
+		brcmf_err("Failed to set F1 blocksize\n");
+		goto out;
+	}
+
+	err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
+	if (err_ret) {
+		brcmf_err("Failed to set F2 blocksize\n");
+		goto out;
+	}
+
+	brcmf_sdioh_enablefuncs(sdiodev);
+
+	/*
+	 * determine host related variables after brcmf_sdio_probe()
+	 * as func->cur_blksize is properly set and F2 init has been
+	 * completed successfully.
+	 */
+	func = sdiodev->func[2];
+	host = func->card->host;
+	sdiodev->sg_support = host->max_segs > 1;
+	max_blocks = min_t(uint, host->max_blk_count, 511u);
+	sdiodev->max_request_size = min_t(uint, host->max_req_size,
+					  max_blocks * func->cur_blksize);
+	sdiodev->max_segment_count = min_t(uint, host->max_segs,
+					   SG_MAX_SINGLE_ALLOC);
+	sdiodev->max_segment_size = host->max_seg_size;
+out:
+	sdio_release_host(sdiodev->func[1]);
+	brcmf_dbg(SDIO, "Done\n");
+	return err_ret;
+}
+
+void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
+{
+	brcmf_dbg(SDIO, "\n");
+
+	/* Disable Function 2 */
+	sdio_claim_host(sdiodev->func[2]);
+	sdio_disable_func(sdiodev->func[2]);
+	sdio_release_host(sdiodev->func[2]);
+
+	/* Disable Function 1 */
+	sdio_claim_host(sdiodev->func[1]);
+	sdio_disable_func(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+
+}
+
+static int brcmf_ops_sdio_probe(struct sdio_func *func,
+				const struct sdio_device_id *id)
+{
+	int err;
+	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_bus *bus_if;
+
+	brcmf_dbg(SDIO, "Enter\n");
+	brcmf_dbg(SDIO, "Class=%x\n", func->class);
+	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
+	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
+	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
+
+	/* Consume func num 1 but dont do anything with it. */
+	if (func->num == 1)
+		return 0;
+
+	/* Ignore anything but func 2 */
+	if (func->num != 2)
+		return -ENODEV;
+
+	bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL);
+	if (!bus_if)
+		return -ENOMEM;
+	sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL);
+	if (!sdiodev) {
+		kfree(bus_if);
+		return -ENOMEM;
+	}
+
+	sdiodev->func[0] = func->card->sdio_func[0];
+	sdiodev->func[1] = func->card->sdio_func[0];
+	sdiodev->func[2] = func;
+
+	sdiodev->bus_if = bus_if;
+	bus_if->bus_priv.sdio = sdiodev;
+	dev_set_drvdata(&func->dev, bus_if);
+	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
+	sdiodev->dev = &sdiodev->func[1]->dev;
+	sdiodev->pdata = brcmfmac_sdio_pdata;
+
+	atomic_set(&sdiodev->suspend, false);
+	init_waitqueue_head(&sdiodev->request_byte_wait);
+	init_waitqueue_head(&sdiodev->request_word_wait);
+	init_waitqueue_head(&sdiodev->request_buffer_wait);
+
+	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n");
+	err = brcmf_sdio_probe(sdiodev);
+	if (err) {
+		brcmf_err("F2 error, probe failed %d...\n", err);
+		goto fail;
+	}
+
+	brcmf_dbg(SDIO, "F2 init completed...\n");
+	return 0;
+
+fail:
+	dev_set_drvdata(&func->dev, NULL);
+	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+	kfree(sdiodev);
+	kfree(bus_if);
+	return err;
+}
+
+static void brcmf_ops_sdio_remove(struct sdio_func *func)
+{
+	struct brcmf_bus *bus_if;
+	struct brcmf_sdio_dev *sdiodev;
+
+	brcmf_dbg(SDIO, "Enter\n");
+	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
+	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
+	brcmf_dbg(SDIO, "Function: %d\n", func->num);
+
+	if (func->num != 1 && func->num != 2)
+		return;
+
+	bus_if = dev_get_drvdata(&func->dev);
+	if (bus_if) {
+		sdiodev = bus_if->bus_priv.sdio;
+		brcmf_sdio_remove(sdiodev);
+
+		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
+
+		kfree(bus_if);
+		kfree(sdiodev);
+	}
+
+	brcmf_dbg(SDIO, "Exit\n");
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmf_sdio_suspend(struct device *dev)
+{
+	mmc_pm_flag_t sdio_flags;
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	int ret = 0;
+
+	brcmf_dbg(SDIO, "\n");
+
+	atomic_set(&sdiodev->suspend, true);
+
+	sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
+	if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+		brcmf_err("Host can't keep power while suspended\n");
+		return -EINVAL;
+	}
+
+	ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
+	if (ret) {
+		brcmf_err("Failed to set pm_flags\n");
+		return ret;
+	}
+
+	brcmf_sdio_wdtmr_enable(sdiodev, false);
+
+	return ret;
+}
+
+static int brcmf_sdio_resume(struct device *dev)
+{
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+
+	brcmf_sdio_wdtmr_enable(sdiodev, true);
+	atomic_set(&sdiodev->suspend, false);
+	return 0;
+}
+
+static const struct dev_pm_ops brcmf_sdio_pm_ops = {
+	.suspend	= brcmf_sdio_suspend,
+	.resume		= brcmf_sdio_resume,
+};
+#endif	/* CONFIG_PM_SLEEP */
+
+static struct sdio_driver brcmf_sdmmc_driver = {
+	.probe = brcmf_ops_sdio_probe,
+	.remove = brcmf_ops_sdio_remove,
+	.name = BRCMFMAC_SDIO_PDATA_NAME,
+	.id_table = brcmf_sdmmc_ids,
+#ifdef CONFIG_PM_SLEEP
+	.drv = {
+		.pm = &brcmf_sdio_pm_ops,
+	},
+#endif	/* CONFIG_PM_SLEEP */
+};
+
+static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+{
+	brcmf_dbg(SDIO, "Enter\n");
+
+	brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);
+
+	if (brcmfmac_sdio_pdata->power_on)
+		brcmfmac_sdio_pdata->power_on();
+
+	return 0;
+}
+
+static int brcmf_sdio_pd_remove(struct platform_device *pdev)
+{
+	brcmf_dbg(SDIO, "Enter\n");
+
+	if (brcmfmac_sdio_pdata->power_off)
+		brcmfmac_sdio_pdata->power_off();
+
+	sdio_unregister_driver(&brcmf_sdmmc_driver);
+
+	return 0;
+}
+
+static struct platform_driver brcmf_sdio_pd = {
+	.remove		= brcmf_sdio_pd_remove,
+	.driver		= {
+		.name	= BRCMFMAC_SDIO_PDATA_NAME,
+		.owner	= THIS_MODULE,
+	}
+};
+
+void brcmf_sdio_register(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&brcmf_sdmmc_driver);
+	if (ret)
+		brcmf_err("sdio_register_driver failed: %d\n", ret);
+}
+
+void brcmf_sdio_exit(void)
+{
+	brcmf_dbg(SDIO, "Enter\n");
+
+	if (brcmfmac_sdio_pdata)
+		platform_driver_unregister(&brcmf_sdio_pd);
+	else
+		sdio_unregister_driver(&brcmf_sdmmc_driver);
+}
+
+void __init brcmf_sdio_init(void)
+{
+	int ret;
+
+	brcmf_dbg(SDIO, "Enter\n");
+
+	ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
+	if (ret == -ENODEV)
+		brcmf_dbg(SDIO, "No platform data available.\n");
+}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
deleted file mode 100644
index a511c27122b8..000000000000
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ /dev/null
@@ -1,552 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/mmc/sdio.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/sched.h>	/* request_irq() */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
-#include <net/cfg80211.h>
-
-#include <defs.h>
-#include <brcm_hw_ids.h>
-#include <brcmu_utils.h>
-#include <brcmu_wifi.h>
-#include "sdio_host.h"
-#include "sdio_chip.h"
-#include "dhd_dbg.h"
-#include "dhd_bus.h"
-
-#define SDIO_VENDOR_ID_BROADCOM		0x02d0
-
-#define DMA_ALIGN_MASK	0x03
-
-#define SDIO_FUNC1_BLOCKSIZE		64
-#define SDIO_FUNC2_BLOCKSIZE		512
-
-/* devices we support, null terminated */
-static const struct sdio_device_id brcmf_sdmmc_ids[] = {
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
-		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
-	{ /* end: all zeroes */ },
-};
-MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
-
-static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
-
-
-bool
-brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
-{
-	bool is_err = false;
-#ifdef CONFIG_PM_SLEEP
-	is_err = atomic_read(&sdiodev->suspend);
-#endif
-	return is_err;
-}
-
-void
-brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq)
-{
-#ifdef CONFIG_PM_SLEEP
-	int retry = 0;
-	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
-		wait_event_timeout(*wq, false, HZ/100);
-#endif
-}
-
-static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
-					    uint regaddr, u8 *byte)
-{
-	struct sdio_func *sdfunc = sdiodev->func[0];
-	int err_ret;
-
-	/*
-	 * Can only directly write to some F0 registers.
-	 * Handle F2 enable/disable and Abort command
-	 * as a special case.
-	 */
-	if (regaddr == SDIO_CCCR_IOEx) {
-		sdfunc = sdiodev->func[2];
-		if (sdfunc) {
-			if (*byte & SDIO_FUNC_ENABLE_2) {
-				/* Enable Function 2 */
-				err_ret = sdio_enable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("enable F2 failed:%d\n",
-						  err_ret);
-			} else {
-				/* Disable Function 2 */
-				err_ret = sdio_disable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("Disable F2 failed:%d\n",
-						  err_ret);
-			}
-		} else {
-			err_ret = -ENOENT;
-		}
-	} else if ((regaddr == SDIO_CCCR_ABORT) ||
-		   (regaddr == SDIO_CCCR_IENx)) {
-		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
-				 GFP_KERNEL);
-		if (!sdfunc)
-			return -ENOMEM;
-		sdfunc->num = 0;
-		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
-		kfree(sdfunc);
-	} else if (regaddr < 0xF0) {
-		brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
-		err_ret = -EPERM;
-	} else {
-		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
-	}
-
-	return err_ret;
-}
-
-int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func,
-			     uint regaddr, u8 *byte)
-{
-	int err_ret;
-
-	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr);
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	if (rw && func == 0) {
-		/* handle F0 separately */
-		err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte);
-	} else {
-		if (rw) /* CMD52 Write */
-			sdio_writeb(sdiodev->func[func], *byte, regaddr,
-				    &err_ret);
-		else if (func == 0) {
-			*byte = sdio_f0_readb(sdiodev->func[func], regaddr,
-					      &err_ret);
-		} else {
-			*byte = sdio_readb(sdiodev->func[func], regaddr,
-					   &err_ret);
-		}
-	}
-
-	if (err_ret) {
-		/*
-		 * SleepCSR register access can fail when
-		 * waking up the device so reduce this noise
-		 * in the logs.
-		 */
-		if (regaddr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
-				  rw ? "write" : "read", func, regaddr, *byte,
-				  err_ret);
-		else
-			brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
-				  rw ? "write" : "read", func, regaddr, *byte,
-				  err_ret);
-	}
-	return err_ret;
-}
-
-int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
-			     uint rw, uint func, uint addr, u32 *word,
-			     uint nbytes)
-{
-	int err_ret = -EIO;
-
-	if (func == 0) {
-		brcmf_err("Only CMD52 allowed to F0\n");
-		return -EINVAL;
-	}
-
-	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
-		  rw, func, addr, nbytes);
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	if (rw) {		/* CMD52 Write */
-		if (nbytes == 4)
-			sdio_writel(sdiodev->func[func], *word, addr,
-				    &err_ret);
-		else if (nbytes == 2)
-			sdio_writew(sdiodev->func[func], (*word & 0xFFFF),
-				    addr, &err_ret);
-		else
-			brcmf_err("Invalid nbytes: %d\n", nbytes);
-	} else {		/* CMD52 Read */
-		if (nbytes == 4)
-			*word = sdio_readl(sdiodev->func[func], addr, &err_ret);
-		else if (nbytes == 2)
-			*word = sdio_readw(sdiodev->func[func], addr,
-					   &err_ret) & 0xFFFF;
-		else
-			brcmf_err("Invalid nbytes: %d\n", nbytes);
-	}
-
-	if (err_ret)
-		brcmf_err("Failed to %s word, Err: 0x%08x\n",
-			  rw ? "write" : "read", err_ret);
-
-	return err_ret;
-}
-
-static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
-{
-	/* read 24 bits and return valid 17 bit addr */
-	int i, ret;
-	u32 scratch, regdata;
-	__le32 scratch_le;
-	u8 *ptr = (u8 *)&scratch_le;
-
-	for (i = 0; i < 3; i++) {
-		regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret);
-		if (ret != 0)
-			brcmf_err("Can't read!\n");
-
-		*ptr++ = (u8) regdata;
-		regaddr++;
-	}
-
-	/* Only the lower 17-bits are valid */
-	scratch = le32_to_cpu(scratch_le);
-	scratch &= 0x0001FFFF;
-	return scratch;
-}
-
-static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)
-{
-	int err_ret;
-	u32 fbraddr;
-	u8 func;
-
-	brcmf_dbg(SDIO, "\n");
-
-	/* Get the Card's common CIS address */
-	sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev,
-							   SDIO_CCCR_CIS);
-	brcmf_dbg(SDIO, "Card's Common CIS Ptr = 0x%x\n",
-		  sdiodev->func_cis_ptr[0]);
-
-	/* Get the Card's function CIS (for each function) */
-	for (fbraddr = SDIO_FBR_BASE(1), func = 1;
-	     func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
-		sdiodev->func_cis_ptr[func] =
-		    brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr);
-		brcmf_dbg(SDIO, "Function %d CIS Ptr = 0x%x\n",
-			  func, sdiodev->func_cis_ptr[func]);
-	}
-
-	/* Enable Function 1 */
-	err_ret = sdio_enable_func(sdiodev->func[1]);
-	if (err_ret)
-		brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
-
-	return false;
-}
-
-/*
- *	Public entry points & extern's
- */
-int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
-{
-	int err_ret = 0;
-	struct mmc_host *host;
-	struct sdio_func *func;
-	uint max_blocks;
-
-	brcmf_dbg(SDIO, "\n");
-
-	sdiodev->num_funcs = 2;
-
-	sdio_claim_host(sdiodev->func[1]);
-
-	err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
-	if (err_ret) {
-		brcmf_err("Failed to set F1 blocksize\n");
-		goto out;
-	}
-
-	err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
-	if (err_ret) {
-		brcmf_err("Failed to set F2 blocksize\n");
-		goto out;
-	}
-
-	brcmf_sdioh_enablefuncs(sdiodev);
-
-	/*
-	 * determine host related variables after brcmf_sdio_probe()
-	 * as func->cur_blksize is properly set and F2 init has been
-	 * completed successfully.
-	 */
-	func = sdiodev->func[2];
-	host = func->card->host;
-	sdiodev->sg_support = host->max_segs > 1;
-	max_blocks = min_t(uint, host->max_blk_count, 511u);
-	sdiodev->max_request_size = min_t(uint, host->max_req_size,
-					  max_blocks * func->cur_blksize);
-	sdiodev->max_segment_count = min_t(uint, host->max_segs,
-					   SG_MAX_SINGLE_ALLOC);
-	sdiodev->max_segment_size = host->max_seg_size;
-out:
-	sdio_release_host(sdiodev->func[1]);
-	brcmf_dbg(SDIO, "Done\n");
-	return err_ret;
-}
-
-void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
-{
-	brcmf_dbg(SDIO, "\n");
-
-	/* Disable Function 2 */
-	sdio_claim_host(sdiodev->func[2]);
-	sdio_disable_func(sdiodev->func[2]);
-	sdio_release_host(sdiodev->func[2]);
-
-	/* Disable Function 1 */
-	sdio_claim_host(sdiodev->func[1]);
-	sdio_disable_func(sdiodev->func[1]);
-	sdio_release_host(sdiodev->func[1]);
-
-}
-
-static int brcmf_ops_sdio_probe(struct sdio_func *func,
-				const struct sdio_device_id *id)
-{
-	int err;
-	struct brcmf_sdio_dev *sdiodev;
-	struct brcmf_bus *bus_if;
-
-	brcmf_dbg(SDIO, "Enter\n");
-	brcmf_dbg(SDIO, "Class=%x\n", func->class);
-	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
-	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
-	brcmf_dbg(SDIO, "Function#: %d\n", func->num);
-
-	/* Consume func num 1 but dont do anything with it. */
-	if (func->num == 1)
-		return 0;
-
-	/* Ignore anything but func 2 */
-	if (func->num != 2)
-		return -ENODEV;
-
-	bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL);
-	if (!bus_if)
-		return -ENOMEM;
-	sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL);
-	if (!sdiodev) {
-		kfree(bus_if);
-		return -ENOMEM;
-	}
-
-	sdiodev->func[0] = func->card->sdio_func[0];
-	sdiodev->func[1] = func->card->sdio_func[0];
-	sdiodev->func[2] = func;
-
-	sdiodev->bus_if = bus_if;
-	bus_if->bus_priv.sdio = sdiodev;
-	dev_set_drvdata(&func->dev, bus_if);
-	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
-	sdiodev->dev = &sdiodev->func[1]->dev;
-	sdiodev->pdata = brcmfmac_sdio_pdata;
-
-	atomic_set(&sdiodev->suspend, false);
-	init_waitqueue_head(&sdiodev->request_byte_wait);
-	init_waitqueue_head(&sdiodev->request_word_wait);
-	init_waitqueue_head(&sdiodev->request_buffer_wait);
-
-	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n");
-	err = brcmf_sdio_probe(sdiodev);
-	if (err) {
-		brcmf_err("F2 error, probe failed %d...\n", err);
-		goto fail;
-	}
-
-	brcmf_dbg(SDIO, "F2 init completed...\n");
-	return 0;
-
-fail:
-	dev_set_drvdata(&func->dev, NULL);
-	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
-	kfree(sdiodev);
-	kfree(bus_if);
-	return err;
-}
-
-static void brcmf_ops_sdio_remove(struct sdio_func *func)
-{
-	struct brcmf_bus *bus_if;
-	struct brcmf_sdio_dev *sdiodev;
-
-	brcmf_dbg(SDIO, "Enter\n");
-	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
-	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
-	brcmf_dbg(SDIO, "Function: %d\n", func->num);
-
-	if (func->num != 1 && func->num != 2)
-		return;
-
-	bus_if = dev_get_drvdata(&func->dev);
-	if (bus_if) {
-		sdiodev = bus_if->bus_priv.sdio;
-		brcmf_sdio_remove(sdiodev);
-
-		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
-		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
-
-		kfree(bus_if);
-		kfree(sdiodev);
-	}
-
-	brcmf_dbg(SDIO, "Exit\n");
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int brcmf_sdio_suspend(struct device *dev)
-{
-	mmc_pm_flag_t sdio_flags;
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-	int ret = 0;
-
-	brcmf_dbg(SDIO, "\n");
-
-	atomic_set(&sdiodev->suspend, true);
-
-	sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
-	if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
-		brcmf_err("Host can't keep power while suspended\n");
-		return -EINVAL;
-	}
-
-	ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
-	if (ret) {
-		brcmf_err("Failed to set pm_flags\n");
-		return ret;
-	}
-
-	brcmf_sdio_wdtmr_enable(sdiodev, false);
-
-	return ret;
-}
-
-static int brcmf_sdio_resume(struct device *dev)
-{
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-
-	brcmf_sdio_wdtmr_enable(sdiodev, true);
-	atomic_set(&sdiodev->suspend, false);
-	return 0;
-}
-
-static const struct dev_pm_ops brcmf_sdio_pm_ops = {
-	.suspend	= brcmf_sdio_suspend,
-	.resume		= brcmf_sdio_resume,
-};
-#endif	/* CONFIG_PM_SLEEP */
-
-static struct sdio_driver brcmf_sdmmc_driver = {
-	.probe = brcmf_ops_sdio_probe,
-	.remove = brcmf_ops_sdio_remove,
-	.name = BRCMFMAC_SDIO_PDATA_NAME,
-	.id_table = brcmf_sdmmc_ids,
-#ifdef CONFIG_PM_SLEEP
-	.drv = {
-		.pm = &brcmf_sdio_pm_ops,
-	},
-#endif	/* CONFIG_PM_SLEEP */
-};
-
-static int brcmf_sdio_pd_probe(struct platform_device *pdev)
-{
-	brcmf_dbg(SDIO, "Enter\n");
-
-	brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);
-
-	if (brcmfmac_sdio_pdata->power_on)
-		brcmfmac_sdio_pdata->power_on();
-
-	return 0;
-}
-
-static int brcmf_sdio_pd_remove(struct platform_device *pdev)
-{
-	brcmf_dbg(SDIO, "Enter\n");
-
-	if (brcmfmac_sdio_pdata->power_off)
-		brcmfmac_sdio_pdata->power_off();
-
-	sdio_unregister_driver(&brcmf_sdmmc_driver);
-
-	return 0;
-}
-
-static struct platform_driver brcmf_sdio_pd = {
-	.remove		= brcmf_sdio_pd_remove,
-	.driver		= {
-		.name	= BRCMFMAC_SDIO_PDATA_NAME,
-		.owner	= THIS_MODULE,
-	}
-};
-
-void brcmf_sdio_register(void)
-{
-	int ret;
-
-	ret = sdio_register_driver(&brcmf_sdmmc_driver);
-	if (ret)
-		brcmf_err("sdio_register_driver failed: %d\n", ret);
-}
-
-void brcmf_sdio_exit(void)
-{
-	brcmf_dbg(SDIO, "Enter\n");
-
-	if (brcmfmac_sdio_pdata)
-		platform_driver_unregister(&brcmf_sdio_pd);
-	else
-		sdio_unregister_driver(&brcmf_sdmmc_driver);
-}
-
-void __init brcmf_sdio_init(void)
-{
-	int ret;
-
-	brcmf_dbg(SDIO, "Enter\n");
-
-	ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
-	if (ret == -ENODEV)
-		brcmf_dbg(SDIO, "No platform data available.\n");
-}
-- 
cgit v1.2.3


From e49b06ba6610e15e0173b99c2830315d814d1725 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:51 +0100
Subject: brcmfmac: remove unnecessary function prototypes

With the merge of bcmsdh.c and bcmsdh_mmc.c several function prototypes
are no longer necessary and can be removed. Consequence is reordering
some of the functions.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 467 ++++++++++-----------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  27 --
 2 files changed, 231 insertions(+), 263 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index d7696d377cd6..c9b3f8c0e926 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -47,6 +47,12 @@
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
+#define SDIO_VENDOR_ID_BROADCOM		0x02d0
+
+#define DMA_ALIGN_MASK	0x03
+
+#define SDIO_FUNC1_BLOCKSIZE		64
+#define SDIO_FUNC2_BLOCKSIZE		512
 
 static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 {
@@ -83,6 +89,25 @@ static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
+static bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
+{
+	bool is_err = false;
+#ifdef CONFIG_PM_SLEEP
+	is_err = atomic_read(&sdiodev->suspend);
+#endif
+	return is_err;
+}
+
+static void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
+				 wait_queue_head_t *wq)
+{
+#ifdef CONFIG_PM_SLEEP
+	int retry = 0;
+	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
+		wait_event_timeout(*wq, false, HZ/100);
+#endif
+}
+
 int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
@@ -169,6 +194,144 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 	return 0;
 }
 
+static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
+					    uint regaddr, u8 *byte)
+{
+	struct sdio_func *sdfunc = sdiodev->func[0];
+	int err_ret;
+
+	/*
+	 * Can only directly write to some F0 registers.
+	 * Handle F2 enable/disable and Abort command
+	 * as a special case.
+	 */
+	if (regaddr == SDIO_CCCR_IOEx) {
+		sdfunc = sdiodev->func[2];
+		if (sdfunc) {
+			if (*byte & SDIO_FUNC_ENABLE_2) {
+				/* Enable Function 2 */
+				err_ret = sdio_enable_func(sdfunc);
+				if (err_ret)
+					brcmf_err("enable F2 failed:%d\n",
+						  err_ret);
+			} else {
+				/* Disable Function 2 */
+				err_ret = sdio_disable_func(sdfunc);
+				if (err_ret)
+					brcmf_err("Disable F2 failed:%d\n",
+						  err_ret);
+			}
+		} else {
+			err_ret = -ENOENT;
+		}
+	} else if ((regaddr == SDIO_CCCR_ABORT) ||
+		   (regaddr == SDIO_CCCR_IENx)) {
+		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
+				 GFP_KERNEL);
+		if (!sdfunc)
+			return -ENOMEM;
+		sdfunc->num = 0;
+		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
+		kfree(sdfunc);
+	} else if (regaddr < 0xF0) {
+		brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
+		err_ret = -EPERM;
+	} else {
+		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
+	}
+
+	return err_ret;
+}
+
+static int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
+				    uint func, uint regaddr, u8 *byte)
+{
+	int err_ret;
+
+	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr);
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	if (rw && func == 0) {
+		/* handle F0 separately */
+		err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte);
+	} else {
+		if (rw) /* CMD52 Write */
+			sdio_writeb(sdiodev->func[func], *byte, regaddr,
+				    &err_ret);
+		else if (func == 0) {
+			*byte = sdio_f0_readb(sdiodev->func[func], regaddr,
+					      &err_ret);
+		} else {
+			*byte = sdio_readb(sdiodev->func[func], regaddr,
+					   &err_ret);
+		}
+	}
+
+	if (err_ret) {
+		/*
+		 * SleepCSR register access can fail when
+		 * waking up the device so reduce this noise
+		 * in the logs.
+		 */
+		if (regaddr != SBSDIO_FUNC1_SLEEPCSR)
+			brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+				  rw ? "write" : "read", func, regaddr, *byte,
+				  err_ret);
+		else
+			brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+				  rw ? "write" : "read", func, regaddr, *byte,
+				  err_ret);
+	}
+	return err_ret;
+}
+
+static int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw,
+				    uint func, uint addr, u32 *word,
+				    uint nbytes)
+{
+	int err_ret = -EIO;
+
+	if (func == 0) {
+		brcmf_err("Only CMD52 allowed to F0\n");
+		return -EINVAL;
+	}
+
+	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
+		  rw, func, addr, nbytes);
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	if (rw) {		/* CMD52 Write */
+		if (nbytes == 4)
+			sdio_writel(sdiodev->func[func], *word, addr,
+				    &err_ret);
+		else if (nbytes == 2)
+			sdio_writew(sdiodev->func[func], (*word & 0xFFFF),
+				    addr, &err_ret);
+		else
+			brcmf_err("Invalid nbytes: %d\n", nbytes);
+	} else {		/* CMD52 Read */
+		if (nbytes == 4)
+			*word = sdio_readl(sdiodev->func[func], addr, &err_ret);
+		else if (nbytes == 2)
+			*word = sdio_readw(sdiodev->func[func], addr,
+					   &err_ret) & 0xFFFF;
+		else
+			brcmf_err("Invalid nbytes: %d\n", nbytes);
+	}
+
+	if (err_ret)
+		brcmf_err("Failed to %s word, Err: 0x%08x\n",
+			  rw ? "write" : "read", err_ret);
+
+	return err_ret;
+}
+
 static int
 brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 {
@@ -757,237 +920,6 @@ int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 	return 0;
 }
 
-int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
-{
-	u32 regs = 0;
-	int ret = 0;
-
-	ret = brcmf_sdioh_attach(sdiodev);
-	if (ret)
-		goto out;
-
-	regs = SI_ENUM_BASE;
-
-	/* try to attach to the target device */
-	sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
-	if (!sdiodev->bus) {
-		brcmf_err("device attach failed\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-out:
-	if (ret)
-		brcmf_sdio_remove(sdiodev);
-
-	return ret;
-}
-
-int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
-{
-	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-
-	if (sdiodev->bus) {
-		brcmf_sdbrcm_disconnect(sdiodev->bus);
-		sdiodev->bus = NULL;
-	}
-
-	brcmf_sdioh_detach(sdiodev);
-
-	sdiodev->sbwad = 0;
-
-	return 0;
-}
-
-void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
-{
-	if (enable)
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
-	else
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
-}
-
-#define SDIO_VENDOR_ID_BROADCOM		0x02d0
-
-#define DMA_ALIGN_MASK	0x03
-
-#define SDIO_FUNC1_BLOCKSIZE		64
-#define SDIO_FUNC2_BLOCKSIZE		512
-
-/* devices we support, null terminated */
-static const struct sdio_device_id brcmf_sdmmc_ids[] = {
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
-		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
-	{ /* end: all zeroes */ },
-};
-MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
-
-static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
-
-
-bool
-brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
-{
-	bool is_err = false;
-#ifdef CONFIG_PM_SLEEP
-	is_err = atomic_read(&sdiodev->suspend);
-#endif
-	return is_err;
-}
-
-void
-brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq)
-{
-#ifdef CONFIG_PM_SLEEP
-	int retry = 0;
-	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
-		wait_event_timeout(*wq, false, HZ/100);
-#endif
-}
-
-static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
-					    uint regaddr, u8 *byte)
-{
-	struct sdio_func *sdfunc = sdiodev->func[0];
-	int err_ret;
-
-	/*
-	 * Can only directly write to some F0 registers.
-	 * Handle F2 enable/disable and Abort command
-	 * as a special case.
-	 */
-	if (regaddr == SDIO_CCCR_IOEx) {
-		sdfunc = sdiodev->func[2];
-		if (sdfunc) {
-			if (*byte & SDIO_FUNC_ENABLE_2) {
-				/* Enable Function 2 */
-				err_ret = sdio_enable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("enable F2 failed:%d\n",
-						  err_ret);
-			} else {
-				/* Disable Function 2 */
-				err_ret = sdio_disable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("Disable F2 failed:%d\n",
-						  err_ret);
-			}
-		} else {
-			err_ret = -ENOENT;
-		}
-	} else if ((regaddr == SDIO_CCCR_ABORT) ||
-		   (regaddr == SDIO_CCCR_IENx)) {
-		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
-				 GFP_KERNEL);
-		if (!sdfunc)
-			return -ENOMEM;
-		sdfunc->num = 0;
-		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
-		kfree(sdfunc);
-	} else if (regaddr < 0xF0) {
-		brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
-		err_ret = -EPERM;
-	} else {
-		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
-	}
-
-	return err_ret;
-}
-
-int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func,
-			     uint regaddr, u8 *byte)
-{
-	int err_ret;
-
-	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr);
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	if (rw && func == 0) {
-		/* handle F0 separately */
-		err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte);
-	} else {
-		if (rw) /* CMD52 Write */
-			sdio_writeb(sdiodev->func[func], *byte, regaddr,
-				    &err_ret);
-		else if (func == 0) {
-			*byte = sdio_f0_readb(sdiodev->func[func], regaddr,
-					      &err_ret);
-		} else {
-			*byte = sdio_readb(sdiodev->func[func], regaddr,
-					   &err_ret);
-		}
-	}
-
-	if (err_ret) {
-		/*
-		 * SleepCSR register access can fail when
-		 * waking up the device so reduce this noise
-		 * in the logs.
-		 */
-		if (regaddr != SBSDIO_FUNC1_SLEEPCSR)
-			brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
-				  rw ? "write" : "read", func, regaddr, *byte,
-				  err_ret);
-		else
-			brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
-				  rw ? "write" : "read", func, regaddr, *byte,
-				  err_ret);
-	}
-	return err_ret;
-}
-
-int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
-			     uint rw, uint func, uint addr, u32 *word,
-			     uint nbytes)
-{
-	int err_ret = -EIO;
-
-	if (func == 0) {
-		brcmf_err("Only CMD52 allowed to F0\n");
-		return -EINVAL;
-	}
-
-	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
-		  rw, func, addr, nbytes);
-
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
-	if (brcmf_pm_resume_error(sdiodev))
-		return -EIO;
-
-	if (rw) {		/* CMD52 Write */
-		if (nbytes == 4)
-			sdio_writel(sdiodev->func[func], *word, addr,
-				    &err_ret);
-		else if (nbytes == 2)
-			sdio_writew(sdiodev->func[func], (*word & 0xFFFF),
-				    addr, &err_ret);
-		else
-			brcmf_err("Invalid nbytes: %d\n", nbytes);
-	} else {		/* CMD52 Read */
-		if (nbytes == 4)
-			*word = sdio_readl(sdiodev->func[func], addr, &err_ret);
-		else if (nbytes == 2)
-			*word = sdio_readw(sdiodev->func[func], addr,
-					   &err_ret) & 0xFFFF;
-		else
-			brcmf_err("Invalid nbytes: %d\n", nbytes);
-	}
-
-	if (err_ret)
-		brcmf_err("Failed to %s word, Err: 0x%08x\n",
-			  rw ? "write" : "read", err_ret);
-
-	return err_ret;
-}
-
 static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
 {
 	/* read 24 bits and return valid 17 bit addr */
@@ -1042,10 +974,7 @@ static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)
 	return false;
 }
 
-/*
- *	Public entry points & extern's
- */
-int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
+static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 {
 	int err_ret = 0;
 	struct mmc_host *host;
@@ -1092,7 +1021,7 @@ out:
 	return err_ret;
 }
 
-void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
+static void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(SDIO, "\n");
 
@@ -1108,6 +1037,64 @@ void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
 
 }
 
+static int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
+{
+	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
+
+	if (sdiodev->bus) {
+		brcmf_sdbrcm_disconnect(sdiodev->bus);
+		sdiodev->bus = NULL;
+	}
+
+	brcmf_sdioh_detach(sdiodev);
+
+	sdiodev->sbwad = 0;
+
+	return 0;
+}
+
+static int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
+{
+	u32 regs = 0;
+	int ret = 0;
+
+	ret = brcmf_sdioh_attach(sdiodev);
+	if (ret)
+		goto out;
+
+	regs = SI_ENUM_BASE;
+
+	/* try to attach to the target device */
+	sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
+	if (!sdiodev->bus) {
+		brcmf_err("device attach failed\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+out:
+	if (ret)
+		brcmf_sdio_remove(sdiodev);
+
+	return ret;
+}
+
+/* devices we support, null terminated */
+static const struct sdio_device_id brcmf_sdmmc_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
+		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+	{ /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
+
+static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
+
+
 static int brcmf_ops_sdio_probe(struct sdio_func *func,
 				const struct sdio_device_id *id)
 {
@@ -1201,6 +1188,14 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
+{
+	if (enable)
+		brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
+	else
+		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
+}
+
 static int brcmf_sdio_suspend(struct device *dev)
 {
 	mmc_pm_flag_t sdio_flags;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index fc0d4f0129db..c1dfa9778992 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -236,43 +236,16 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
  *   nbytes:   number of bytes to transfer to/from buf
  * Returns 0 or error code.
  */
-int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr,
-			u8 *buf, uint nbytes);
 int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		     u8 *data, uint size);
 
 /* Issue an abort to the specified function */
 int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
-/* platform specific/high level functions */
-int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
-int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev);
-
-/* attach, return handler on success, NULL if failed.
- *  The handler shall be provided by all subsequent calls. No local cache
- *  cfghdl points to the starting address of pci device mapped memory
- */
-int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev);
-void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev);
-
-/* read or write one byte using cmd52 */
-int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc,
-			     uint addr, u8 *byte);
-
-/* read or write 2/4 bytes using cmd53 */
-int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc,
-			     uint addr, u32 *word, uint nbyte);
-
-/* Watchdog timer interface for pm ops */
-void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable);
-
 void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdbrcm_disconnect(void *ptr);
 void brcmf_sdbrcm_isr(void *arg);
 
 void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick);
 
-void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
-			  wait_queue_head_t *wq);
-bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev);
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.3


From 463c30b3f987b9933a705227964847b49d4d7b32 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:52 +0100
Subject: brcmfmac: remove unused struct brcmf_sdio_dev::func_cis_ptr attribute

During the SDIO probe the func_cis_ptr attribute in struct brcmf_sdio_dev
is being determined, but it is never used after that. Removing it also
obsoletes two functions in bcmsdh.c.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 61 +++-------------------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  1 -
 2 files changed, 6 insertions(+), 56 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index c9b3f8c0e926..e5f25c5b9c32 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -920,60 +920,6 @@ int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 	return 0;
 }
 
-static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr)
-{
-	/* read 24 bits and return valid 17 bit addr */
-	int i, ret;
-	u32 scratch, regdata;
-	__le32 scratch_le;
-	u8 *ptr = (u8 *)&scratch_le;
-
-	for (i = 0; i < 3; i++) {
-		regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret);
-		if (ret != 0)
-			brcmf_err("Can't read!\n");
-
-		*ptr++ = (u8) regdata;
-		regaddr++;
-	}
-
-	/* Only the lower 17-bits are valid */
-	scratch = le32_to_cpu(scratch_le);
-	scratch &= 0x0001FFFF;
-	return scratch;
-}
-
-static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)
-{
-	int err_ret;
-	u32 fbraddr;
-	u8 func;
-
-	brcmf_dbg(SDIO, "\n");
-
-	/* Get the Card's common CIS address */
-	sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev,
-							   SDIO_CCCR_CIS);
-	brcmf_dbg(SDIO, "Card's Common CIS Ptr = 0x%x\n",
-		  sdiodev->func_cis_ptr[0]);
-
-	/* Get the Card's function CIS (for each function) */
-	for (fbraddr = SDIO_FBR_BASE(1), func = 1;
-	     func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
-		sdiodev->func_cis_ptr[func] =
-		    brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr);
-		brcmf_dbg(SDIO, "Function %d CIS Ptr = 0x%x\n",
-			  func, sdiodev->func_cis_ptr[func]);
-	}
-
-	/* Enable Function 1 */
-	err_ret = sdio_enable_func(sdiodev->func[1]);
-	if (err_ret)
-		brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
-
-	return false;
-}
-
 static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 {
 	int err_ret = 0;
@@ -999,7 +945,12 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 		goto out;
 	}
 
-	brcmf_sdioh_enablefuncs(sdiodev);
+	/* Enable Function 1 */
+	err_ret = sdio_enable_func(sdiodev->func[1]);
+	if (err_ret) {
+		brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
+		goto out;
+	}
 
 	/*
 	 * determine host related variables after brcmf_sdio_probe()
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index c1dfa9778992..8b8f2a9e7266 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -164,7 +164,6 @@ struct brcmf_sdio;
 struct brcmf_sdio_dev {
 	struct sdio_func *func[SDIO_MAX_FUNCS];
 	u8 num_funcs;			/* Supported funcs on client */
-	u32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
 	u32 sbwad;			/* Save backplane window address */
 	void *bus;
 	atomic_t suspend;		/* suspend flag */
-- 
cgit v1.2.3


From 71370eb87b4815d4cb4c901b85386b4e7b72c578 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:53 +0100
Subject: brcmfmac: use sdio functions to enable/disable F2

Instead of catching CCCR_IOEx register in F0 write access to
determine whether F2 state needs to change do it with direct
call to sdio_[enable/disable]_func().

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 29 ++++++-------------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 33 ++++------------------
 2 files changed, 14 insertions(+), 48 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e5f25c5b9c32..134bef66a31f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -53,6 +53,9 @@
 
 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
+/* Maximum milliseconds to wait for F2 to come up */
+#define SDIO_WAIT_F2RDY	3000
+
 
 static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 {
@@ -205,27 +208,8 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 	 * Handle F2 enable/disable and Abort command
 	 * as a special case.
 	 */
-	if (regaddr == SDIO_CCCR_IOEx) {
-		sdfunc = sdiodev->func[2];
-		if (sdfunc) {
-			if (*byte & SDIO_FUNC_ENABLE_2) {
-				/* Enable Function 2 */
-				err_ret = sdio_enable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("enable F2 failed:%d\n",
-						  err_ret);
-			} else {
-				/* Disable Function 2 */
-				err_ret = sdio_disable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("Disable F2 failed:%d\n",
-						  err_ret);
-			}
-		} else {
-			err_ret = -ENOENT;
-		}
-	} else if ((regaddr == SDIO_CCCR_ABORT) ||
-		   (regaddr == SDIO_CCCR_IENx)) {
+	if ((regaddr == SDIO_CCCR_ABORT) ||
+	    (regaddr == SDIO_CCCR_IENx)) {
 		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
 				 GFP_KERNEL);
 		if (!sdfunc)
@@ -945,6 +929,9 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 		goto out;
 	}
 
+	/* increase F2 timeout */
+	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;
+
 	/* Enable Function 1 */
 	err_ret = sdio_enable_func(sdiodev->func[1]);
 	if (err_ret) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 0f95f3e79c10..c3f3d8d0eab0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -260,9 +260,6 @@ struct rte_console {
 #define MAX_HDR_READ	(1 << 6)
 #define MAX_RX_DATASZ	2048
 
-/* Maximum milliseconds to wait for F2 to come up */
-#define BRCMF_WAIT_F2RDY	3000
-
 /* Bump up limit on waiting for HT to account for first startup;
  * if the image is doing a CRC calculation before programming the PMU
  * for HT availability, it could take a couple hundred ms more, so
@@ -2265,8 +2262,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 
 	/* Turn off the bus (F2), free any pending packets */
 	brcmf_dbg(INTR, "disable SDIO interrupts\n");
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
-			 NULL);
+	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
 	/* Clear any pending interrupts now that F2 is disabled */
 	w_sdreg32(bus, local_hostintmask,
@@ -3570,8 +3566,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	unsigned long timeout;
-	u8 ready, enable;
 	int err, ret = 0;
 	u8 saveclk;
 
@@ -3612,26 +3606,13 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	/* Enable function 2 (frame transfers) */
 	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
 		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
-	enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
-
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
+	err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
-	timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
-	ready = 0;
-	while (enable != ready) {
-		ready = brcmf_sdio_regrb(bus->sdiodev,
-					 SDIO_CCCR_IORx, NULL);
-		if (time_after(jiffies, timeout))
-			break;
-		else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
-			/* prevent busy waiting if it takes too long */
-			msleep_interruptible(20);
-	}
 
-	brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready);
+	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
 
 	/* If F2 successfully enabled, set core and enable interrupts */
-	if (ready == enable) {
+	if (!err) {
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
 		w_sdreg32(bus, bus->hostintmask,
@@ -3640,8 +3621,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
-		enable = SDIO_FUNC_ENABLE_1;
-		brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
+		sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 		ret = -ENODEV;
 	}
 
@@ -3942,8 +3922,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
-			 SDIO_FUNC_ENABLE_1, NULL);
+	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
 	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 	bus->rxflow = false;
-- 
cgit v1.2.3


From 1cee05e38479efc11f1e7178b49108369c6f059e Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:54 +0100
Subject: brcmfmac: remove brcmf_sdio_regrw_helper() from header file

Make brcmf_sdio_regrw_helper() static removing its use outside of
the bcmsdh.c source file.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c    | 5 ++---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c  | 4 ++--
 drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h | 2 --
 3 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 134bef66a31f..3934afa899c9 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -369,9 +369,8 @@ brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 	return 0;
 }
 
-int
-brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
-			void *data, bool write)
+static int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
+				   void *data, bool write)
 {
 	u8 func_num, reg_size;
 	s32 retry = 0;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index c3f3d8d0eab0..a70feb5198dd 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2316,7 +2316,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	addr = bus->ci->c_inf[idx].base +
 	       offsetof(struct sdpcmd_regs, intstatus);
 
-	ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, false);
+	val = brcmf_sdio_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
 		val = 0;
@@ -2326,7 +2326,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 
 	/* Clear interrupts */
 	if (val) {
-		ret = brcmf_sdio_regrw_helper(bus->sdiodev, addr, &val, true);
+		brcmf_sdio_regwl(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
 	}
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 8b8f2a9e7266..a1e5f726f7c5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -194,8 +194,6 @@ void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
 		      int *ret);
 void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 		      int *ret);
-int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
-			    void *data, bool write);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
-- 
cgit v1.2.3


From 4744d16402e3557dc98359effaec3371e78a9bc3 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:55 +0100
Subject: brcmfmac: remove regs parameter from sdio probe functions

The chip recognition requires a base address that was provided
to it during the probe. However, the address is a fixed define
value so it is unnecessary to pass through the probe functions.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c    |  5 +----
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c  | 11 ++++-------
 drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c |  8 ++++----
 drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h |  2 +-
 5 files changed, 11 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 3934afa899c9..ec9f5ed7b585 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -992,17 +992,14 @@ static int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
 
 static int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 {
-	u32 regs = 0;
 	int ret = 0;
 
 	ret = brcmf_sdioh_attach(sdiodev);
 	if (ret)
 		goto out;
 
-	regs = SI_ENUM_BASE;
-
 	/* try to attach to the target device */
-	sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
+	sdiodev->bus = brcmf_sdbrcm_probe(sdiodev);
 	if (!sdiodev->bus) {
 		brcmf_err("device attach failed\n");
 		ret = -ENODEV;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index a70feb5198dd..24d69f4eb9a0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3803,7 +3803,7 @@ static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
 }
 
 static bool
-brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
+brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus)
 {
 	u8 clkctl = 0;
 	int err = 0;
@@ -3835,7 +3835,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
 		goto fail;
 	}
 
-	if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
+	if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) {
 		brcmf_err("brcmf_sdio_chip_attach failed!\n");
 		goto fail;
 	}
@@ -4037,16 +4037,13 @@ static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.gettxq = brcmf_sdbrcm_bus_gettxq,
 };
 
-void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
+void *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret;
 	struct brcmf_sdio *bus;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	/* We make an assumption about address window mappings:
-	 * regsva == SI_ENUM_BASE*/
-
 	/* Allocate private bus interface state */
 	bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
 	if (!bus)
@@ -4080,7 +4077,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	}
 
 	/* attempt to attach to the dongle */
-	if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
+	if (!(brcmf_sdbrcm_probe_attach(bus))) {
 		brcmf_err("brcmf_sdbrcm_probe_attach failed\n");
 		goto fail;
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 2096a14ef1fb..b612808df94f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -438,7 +438,7 @@ static inline int brcmf_sdio_chip_cichk(struct chip_info *ci)
 #endif
 
 static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
-				       struct chip_info *ci, u32 regs)
+				       struct chip_info *ci)
 {
 	u32 regdata;
 	int ret;
@@ -449,7 +449,7 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 	 * other ways of recognition should be added here.
 	 */
 	ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
-	ci->c_inf[0].base = regs;
+	ci->c_inf[0].base = SI_ENUM_BASE;
 	regdata = brcmf_sdio_regrl(sdiodev,
 				   CORE_CC_REG(ci->c_inf[0].base, chipid),
 				   NULL);
@@ -681,7 +681,7 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
 }
 
 int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct chip_info **ci_ptr, u32 regs)
+			   struct chip_info **ci_ptr)
 {
 	int ret;
 	struct chip_info *ci;
@@ -697,7 +697,7 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
 	if (ret != 0)
 		goto err;
 
-	ret = brcmf_sdio_chip_recognition(sdiodev, ci, regs);
+	ret = brcmf_sdio_chip_recognition(sdiodev, ci);
 	if (ret != 0)
 		goto err;
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
index 507c61c991fa..d0f4b45b24c7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
@@ -224,7 +224,7 @@ struct sdpcmd_regs {
 };
 
 int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
-			   struct chip_info **ci_ptr, u32 regs);
+			   struct chip_info **ci_ptr);
 void brcmf_sdio_chip_detach(struct chip_info **ci_ptr);
 void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 				       struct chip_info *ci, u32 drivestrength);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index a1e5f726f7c5..d98b4bd1447b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -239,7 +239,7 @@ int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 /* Issue an abort to the specified function */
 int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
-void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev);
+void *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdbrcm_disconnect(void *ptr);
 void brcmf_sdbrcm_isr(void *arg);
 
-- 
cgit v1.2.3


From 964ec1cfeb8f30b50e341216f25e9170ac921ffe Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:56 +0100
Subject: brcmfmac: get rid of some void pointer parameters

In sdio code a couple of functions use a void pointer as argument
type although it should be struct brcmf_sdio. Changing the functions
to have proper type checking.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c  | 13 ++++---------
 drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h |  9 ++++-----
 2 files changed, 8 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 24d69f4eb9a0..c42d5a005112 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3649,10 +3649,8 @@ exit:
 	return ret;
 }
 
-void brcmf_sdbrcm_isr(void *arg)
+void brcmf_sdbrcm_isr(struct brcmf_sdio *bus)
 {
-	struct brcmf_sdio *bus = (struct brcmf_sdio *) arg;
-
 	brcmf_dbg(TRACE, "Enter\n");
 
 	if (!bus) {
@@ -4037,7 +4035,7 @@ static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.gettxq = brcmf_sdbrcm_bus_gettxq,
 };
 
-void *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
+struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret;
 	struct brcmf_sdio *bus;
@@ -4147,14 +4145,11 @@ fail:
 	return NULL;
 }
 
-void brcmf_sdbrcm_disconnect(void *ptr)
+void brcmf_sdbrcm_disconnect(struct brcmf_sdio *bus)
 {
-	struct brcmf_sdio *bus = (struct brcmf_sdio *)ptr;
-
 	brcmf_dbg(TRACE, "Enter\n");
 
-	if (bus)
-		brcmf_sdbrcm_release(bus);
+	brcmf_sdbrcm_release(bus);
 
 	brcmf_dbg(TRACE, "Disconnected\n");
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index d98b4bd1447b..414aa16a587c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -165,7 +165,7 @@ struct brcmf_sdio_dev {
 	struct sdio_func *func[SDIO_MAX_FUNCS];
 	u8 num_funcs;			/* Supported funcs on client */
 	u32 sbwad;			/* Save backplane window address */
-	void *bus;
+	struct brcmf_sdio *bus;
 	atomic_t suspend;		/* suspend flag */
 	wait_queue_head_t request_byte_wait;
 	wait_queue_head_t request_word_wait;
@@ -239,10 +239,9 @@ int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 /* Issue an abort to the specified function */
 int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
-void *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev);
-void brcmf_sdbrcm_disconnect(void *ptr);
-void brcmf_sdbrcm_isr(void *arg);
-
+struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev);
+void brcmf_sdbrcm_disconnect(struct brcmf_sdio *bus);
+void brcmf_sdbrcm_isr(struct brcmf_sdio *bus);
 void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick);
 
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.3


From 6043033c31556786e8b7c342978f65ef5a672a1e Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:57 +0100
Subject: brcmfmac: remove brcmf_sdio_wdtimer_enable() function

Instead of using the brcmf_sdio_wdtimer_enable() function
call brcmf_sdbrcm_wd_timer() directly.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index ec9f5ed7b585..e8317b2cdc29 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1122,14 +1122,6 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
-{
-	if (enable)
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
-	else
-		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
-}
-
 static int brcmf_sdio_suspend(struct device *dev)
 {
 	mmc_pm_flag_t sdio_flags;
@@ -1153,7 +1145,7 @@ static int brcmf_sdio_suspend(struct device *dev)
 		return ret;
 	}
 
-	brcmf_sdio_wdtmr_enable(sdiodev, false);
+	brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
 
 	return ret;
 }
@@ -1163,7 +1155,7 @@ static int brcmf_sdio_resume(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
-	brcmf_sdio_wdtmr_enable(sdiodev, true);
+	brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
 	atomic_set(&sdiodev->suspend, false);
 	return 0;
 }
-- 
cgit v1.2.3


From a39be27b49e309bb790bea93a2595732f93e5fcb Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:58 +0100
Subject: brcmfmac: use consistent function names in bcmsdh.c

Functions in bcmsdh.c that are called with struct brcmf_sdio_dev
instance are renamed consistently with brcmf_sdiod_ prefix. Also
removing brcmf_sdioh_attach/detach() functions and merge it with
brcmf_sdiod_probe/remove().

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 274 ++++++++---------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 324 ++++++++++-----------
 .../net/wireless/brcm80211/brcmfmac/sdio_chip.c    | 288 +++++++++---------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  44 +--
 4 files changed, 452 insertions(+), 478 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e8317b2cdc29..981ca9277117 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -57,7 +57,7 @@
 #define SDIO_WAIT_F2RDY	3000
 
 
-static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
+static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev_id);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -77,7 +77,7 @@ static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void brcmf_sdio_ib_irqhandler(struct sdio_func *func)
+static void brcmf_sdiod_ib_irqhandler(struct sdio_func *func)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -88,11 +88,11 @@ static void brcmf_sdio_ib_irqhandler(struct sdio_func *func)
 }
 
 /* dummy handler for SDIO function 2 interrupt */
-static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
+static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
-static bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
+static bool brcmf_sdiod_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 {
 	bool is_err = false;
 #ifdef CONFIG_PM_SLEEP
@@ -101,8 +101,8 @@ static bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 	return is_err;
 }
 
-static void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
-				 wait_queue_head_t *wq)
+static void brcmf_sdiod_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
+				       wait_queue_head_t *wq)
 {
 #ifdef CONFIG_PM_SLEEP
 	int retry = 0;
@@ -111,7 +111,7 @@ static void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
 #endif
 }
 
-int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
 	u8 data;
@@ -121,7 +121,7 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 		brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
 			  sdiodev->pdata->oob_irq_nr);
 		ret = request_irq(sdiodev->pdata->oob_irq_nr,
-				  brcmf_sdio_oob_irqhandler,
+				  brcmf_sdiod_oob_irqhandler,
 				  sdiodev->pdata->oob_irq_flags,
 				  "brcmf_oob_intr",
 				  &sdiodev->func[1]->dev);
@@ -145,36 +145,36 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 		sdio_claim_host(sdiodev->func[1]);
 
 		/* must configure SDIO_CCCR_IENx to enable irq */
-		data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+		data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
 		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
 		/* redirect, configure and enable io for interrupt signal */
 		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
 		if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
 			data |= SDIO_SEPINT_ACT_HI;
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 
 		sdio_release_host(sdiodev->func[1]);
 	} else {
 		brcmf_dbg(SDIO, "Entering\n");
 		sdio_claim_host(sdiodev->func[1]);
-		sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler);
-		sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
+		sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler);
+		sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler);
 		sdio_release_host(sdiodev->func[1]);
 	}
 
 	return 0;
 }
 
-int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(SDIO, "Entering\n");
 
 	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
 		sdio_claim_host(sdiodev->func[1]);
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
-		brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
 		sdio_release_host(sdiodev->func[1]);
 
 		if (sdiodev->oob_irq_requested) {
@@ -197,7 +197,7 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 	return 0;
 }
 
-static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
+static inline int brcmf_sdiod_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 					    uint regaddr, u8 *byte)
 {
 	struct sdio_func *sdfunc = sdiodev->func[0];
@@ -227,20 +227,20 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 	return err_ret;
 }
 
-static int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
+static int brcmf_sdiod_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
 				    uint func, uint regaddr, u8 *byte)
 {
 	int err_ret;
 
 	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr);
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	if (rw && func == 0) {
 		/* handle F0 separately */
-		err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte);
+		err_ret = brcmf_sdiod_f0_write_byte(sdiodev, regaddr, byte);
 	} else {
 		if (rw) /* CMD52 Write */
 			sdio_writeb(sdiodev->func[func], *byte, regaddr,
@@ -272,7 +272,7 @@ static int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
 	return err_ret;
 }
 
-static int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw,
+static int brcmf_sdiod_request_word(struct brcmf_sdio_dev *sdiodev, uint rw,
 				    uint func, uint addr, u32 *word,
 				    uint nbytes)
 {
@@ -286,8 +286,8 @@ static int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw,
 	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
 		  rw, func, addr, nbytes);
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	if (rw) {		/* CMD52 Write */
@@ -317,7 +317,7 @@ static int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw,
 }
 
 static int
-brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
+brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 {
 	int err = 0, i;
 	u8 addr[3];
@@ -332,7 +332,7 @@ brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 		do {
 			if (retry)
 				usleep_range(1000, 2000);
-			err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE,
+			err = brcmf_sdiod_request_byte(sdiodev, SDIOH_WRITE,
 					SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i,
 					&addr[i]);
 		} while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
@@ -348,13 +348,13 @@ brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 }
 
 static int
-brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
+brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 {
 	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
 
 	if (bar0 != sdiodev->sbwad) {
-		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
+		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
 		if (err)
 			return err;
 
@@ -369,8 +369,8 @@ brcmf_sdio_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
 	return 0;
 }
 
-static int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
-				   void *data, bool write)
+static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
+				    void *data, bool write)
 {
 	u8 func_num, reg_size;
 	s32 retry = 0;
@@ -392,7 +392,7 @@ static int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		func_num = SDIO_FUNC_1;
 		reg_size = 4;
 
-		ret = brcmf_sdio_addrprep(sdiodev, reg_size, &addr);
+		ret = brcmf_sdiod_addrprep(sdiodev, reg_size, &addr);
 		if (ret)
 			goto done;
 	}
@@ -403,10 +403,10 @@ static int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		if (retry)	/* wait for 1 ms till bus get settled down */
 			usleep_range(1000, 2000);
 		if (reg_size == 1)
-			ret = brcmf_sdioh_request_byte(sdiodev, write,
+			ret = brcmf_sdiod_request_byte(sdiodev, write,
 						       func_num, addr, data);
 		else
-			ret = brcmf_sdioh_request_word(sdiodev, write,
+			ret = brcmf_sdiod_request_word(sdiodev, write,
 						       func_num, addr, data, 4);
 	} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
@@ -417,13 +417,13 @@ done:
 	return ret;
 }
 
-u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
 	u8 data;
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, &data, false);
 	brcmf_dbg(SDIO, "data:0x%02x\n", data);
 
 	if (ret)
@@ -432,13 +432,13 @@ u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	return data;
 }
 
-u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
+u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 {
 	u32 data;
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, &data, false);
 	brcmf_dbg(SDIO, "data:0x%08x\n", data);
 
 	if (ret)
@@ -447,37 +447,37 @@ u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 	return data;
 }
 
-void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
+void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		      u8 data, int *ret)
 {
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, &data, true);
 
 	if (ret)
 		*ret = retval;
 }
 
-void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
+void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		      u32 data, int *ret)
 {
 	int retval;
 
 	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
-	retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
+	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, &data, true);
 
 	if (ret)
 		*ret = retval;
 }
 
-static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
+static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 			     bool write, u32 addr, struct sk_buff *pkt)
 {
 	unsigned int req_sz;
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	/* Single skb use the standard mmc interface */
@@ -500,7 +500,7 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 }
 
 /**
- * brcmf_sdio_sglist_rw - SDIO interface function for block data access
+ * brcmf_sdiod_sglist_rw - SDIO interface function for block data access
  * @sdiodev: brcmfmac sdio device
  * @fn: SDIO function number
  * @write: direction flag
@@ -511,9 +511,9 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
  * stack for block data access. It assumes that the skb passed down by the
  * caller has already been padded and aligned.
  */
-static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
-				bool write, u32 addr,
-				struct sk_buff_head *pktlist)
+static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
+				 bool write, u32 addr,
+				 struct sk_buff_head *pktlist)
 {
 	unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
 	unsigned int max_req_sz, orig_offset, dst_offset;
@@ -531,8 +531,8 @@ static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	if (!pktlist->qlen)
 		return -EINVAL;
 
-	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_pm_resume_error(sdiodev))
+	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_sdiod_pm_resume_error(sdiodev))
 		return -EIO;
 
 	target_list = pktlist;
@@ -680,8 +680,8 @@ exit:
 }
 
 int
-brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, u8 *buf, uint nbytes)
+brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		     uint flags, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
 	int err;
@@ -693,7 +693,7 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		return -EIO;
 	}
 
-	err = brcmf_sdcard_recv_pkt(sdiodev, addr, fn, flags, mypkt);
+	err = brcmf_sdiod_recv_pkt(sdiodev, addr, fn, flags, mypkt);
 	if (!err)
 		memcpy(buf, mypkt->data, nbytes);
 
@@ -702,8 +702,8 @@ brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 }
 
 int
-brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, struct sk_buff *pkt)
+brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		     uint flags, struct sk_buff *pkt)
 {
 	uint width;
 	int err = 0;
@@ -712,18 +712,18 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		  fn, addr, pkt->len);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
 	if (err)
 		goto done;
 
-	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
+	err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pkt);
 
 done:
 	return err;
 }
 
-int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			    uint flags, struct sk_buff_head *pktq, uint totlen)
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			   uint flags, struct sk_buff_head *pktq, uint totlen)
 {
 	struct sk_buff *glom_skb;
 	struct sk_buff *skb;
@@ -734,17 +734,17 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		  fn, addr, pktq->qlen);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
 	if (err)
 		goto done;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq->next);
+		err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, glom_skb);
+		err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, glom_skb);
 		if (err)
 			goto done;
 
@@ -753,15 +753,15 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdio_sglist_rw(sdiodev, fn, false, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, fn, false, addr, pktq);
 
 done:
 	return err;
 }
 
 int
-brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, u8 *buf, uint nbytes)
+brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		     uint flags, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
 	uint width;
@@ -777,10 +777,10 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	memcpy(mypkt->data, buf, nbytes);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
 
 	if (!err)
-		err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, mypkt);
+		err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
@@ -788,8 +788,8 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 }
 
 int
-brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		      uint flags, struct sk_buff_head *pktq)
+brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		     uint flags, struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
 	uint width;
@@ -799,25 +799,25 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		  fn, addr, pktq->qlen);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
 	if (err)
 		return err;
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support)
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, skb);
+			err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, skb);
 			if (err)
 				break;
 		}
 	else
-		err = brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, fn, true, addr, pktq);
 
 	return err;
 }
 
 int
-brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
-		 u8 *data, uint size)
+brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+		  u8 *data, uint size)
 {
 	int bcmerror = 0;
 	struct sk_buff *pkt;
@@ -844,7 +844,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	/* Do the transfer(s) */
 	while (size) {
 		/* Set the backplane window to include the start address */
-		bcmerror = brcmf_sdcard_set_sbaddr_window(sdiodev, address);
+		bcmerror = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
 		if (bcmerror)
 			break;
 
@@ -858,8 +858,8 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
-		bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
-					     sdaddr, pkt);
+		bcmerror = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write,
+					      sdaddr, pkt);
 		if (bcmerror) {
 			brcmf_err("membytes transfer failed\n");
 			break;
@@ -881,7 +881,7 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	dev_kfree_skb(pkt);
 
 	/* Return the window to backplane enumeration space for core access */
-	if (brcmf_sdcard_set_sbaddr_window(sdiodev, sdiodev->sbwad))
+	if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad))
 		brcmf_err("FAILED to set window back to 0x%x\n",
 			  sdiodev->sbwad);
 
@@ -890,41 +890,64 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	return bcmerror;
 }
 
-int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 {
 	char t_func = (char)fn;
 	brcmf_dbg(SDIO, "Enter\n");
 
 	/* issue abort cmd52 command through F0 */
-	brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
+	brcmf_sdiod_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
 				 SDIO_CCCR_ABORT, &t_func);
 
 	brcmf_dbg(SDIO, "Exit\n");
 	return 0;
 }
 
-static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
+static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
+{
+	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
+
+	if (sdiodev->bus) {
+		brcmf_sdbrcm_disconnect(sdiodev->bus);
+		sdiodev->bus = NULL;
+	}
+
+	/* Disable Function 2 */
+	sdio_claim_host(sdiodev->func[2]);
+	sdio_disable_func(sdiodev->func[2]);
+	sdio_release_host(sdiodev->func[2]);
+
+	/* Disable Function 1 */
+	sdio_claim_host(sdiodev->func[1]);
+	sdio_disable_func(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+
+	sdiodev->sbwad = 0;
+
+	return 0;
+}
+
+static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
-	int err_ret = 0;
-	struct mmc_host *host;
 	struct sdio_func *func;
+	struct mmc_host *host;
 	uint max_blocks;
-
-	brcmf_dbg(SDIO, "\n");
+	int ret = 0;
 
 	sdiodev->num_funcs = 2;
 
 	sdio_claim_host(sdiodev->func[1]);
 
-	err_ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
-	if (err_ret) {
+	ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
+	if (ret) {
 		brcmf_err("Failed to set F1 blocksize\n");
+		sdio_release_host(sdiodev->func[1]);
 		goto out;
 	}
-
-	err_ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
-	if (err_ret) {
+	ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
+	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
+		sdio_release_host(sdiodev->func[1]);
 		goto out;
 	}
 
@@ -932,14 +955,15 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;
 
 	/* Enable Function 1 */
-	err_ret = sdio_enable_func(sdiodev->func[1]);
-	if (err_ret) {
-		brcmf_err("Failed to enable F1 Err: 0x%08x\n", err_ret);
+	ret = sdio_enable_func(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+	if (ret) {
+		brcmf_err("Failed to enable F1: err=%d\n", ret);
 		goto out;
 	}
 
 	/*
-	 * determine host related variables after brcmf_sdio_probe()
+	 * determine host related variables after brcmf_sdiod_probe()
 	 * as func->cur_blksize is properly set and F2 init has been
 	 * completed successfully.
 	 */
@@ -952,63 +976,17 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->max_segment_count = min_t(uint, host->max_segs,
 					   SG_MAX_SINGLE_ALLOC);
 	sdiodev->max_segment_size = host->max_seg_size;
-out:
-	sdio_release_host(sdiodev->func[1]);
-	brcmf_dbg(SDIO, "Done\n");
-	return err_ret;
-}
-
-static void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
-{
-	brcmf_dbg(SDIO, "\n");
-
-	/* Disable Function 2 */
-	sdio_claim_host(sdiodev->func[2]);
-	sdio_disable_func(sdiodev->func[2]);
-	sdio_release_host(sdiodev->func[2]);
-
-	/* Disable Function 1 */
-	sdio_claim_host(sdiodev->func[1]);
-	sdio_disable_func(sdiodev->func[1]);
-	sdio_release_host(sdiodev->func[1]);
-
-}
-
-static int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
-{
-	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-
-	if (sdiodev->bus) {
-		brcmf_sdbrcm_disconnect(sdiodev->bus);
-		sdiodev->bus = NULL;
-	}
-
-	brcmf_sdioh_detach(sdiodev);
-
-	sdiodev->sbwad = 0;
-
-	return 0;
-}
-
-static int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
-{
-	int ret = 0;
-
-	ret = brcmf_sdioh_attach(sdiodev);
-	if (ret)
-		goto out;
 
 	/* try to attach to the target device */
 	sdiodev->bus = brcmf_sdbrcm_probe(sdiodev);
 	if (!sdiodev->bus) {
-		brcmf_err("device attach failed\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
 out:
 	if (ret)
-		brcmf_sdio_remove(sdiodev);
+		brcmf_sdiod_remove(sdiodev);
 
 	return ret;
 }
@@ -1075,8 +1053,8 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	init_waitqueue_head(&sdiodev->request_word_wait);
 	init_waitqueue_head(&sdiodev->request_buffer_wait);
 
-	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n");
-	err = brcmf_sdio_probe(sdiodev);
+	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n");
+	err = brcmf_sdiod_probe(sdiodev);
 	if (err) {
 		brcmf_err("F2 error, probe failed %d...\n", err);
 		goto fail;
@@ -1109,7 +1087,7 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 	bus_if = dev_get_drvdata(&func->dev);
 	if (bus_if) {
 		sdiodev = bus_if->bus_priv.sdio;
-		brcmf_sdio_remove(sdiodev);
+		brcmf_sdiod_remove(sdiodev);
 
 		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
 		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
@@ -1122,7 +1100,7 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int brcmf_sdio_suspend(struct device *dev)
+static int brcmf_ops_sdio_suspend(struct device *dev)
 {
 	mmc_pm_flag_t sdio_flags;
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
@@ -1150,7 +1128,7 @@ static int brcmf_sdio_suspend(struct device *dev)
 	return ret;
 }
 
-static int brcmf_sdio_resume(struct device *dev)
+static int brcmf_ops_sdio_resume(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -1161,8 +1139,8 @@ static int brcmf_sdio_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops brcmf_sdio_pm_ops = {
-	.suspend	= brcmf_sdio_suspend,
-	.resume		= brcmf_sdio_resume,
+	.suspend	= brcmf_ops_sdio_suspend,
+	.resume		= brcmf_ops_sdio_resume,
 };
 #endif	/* CONFIG_PM_SLEEP */
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index c42d5a005112..3d8a1a8d54fe 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -621,8 +621,8 @@ r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 	int ret;
 
-	*regvar = brcmf_sdio_regrl(bus->sdiodev,
-				   bus->ci->c_inf[idx].base + offset, &ret);
+	*regvar = brcmf_sdiod_regrl(bus->sdiodev,
+				    bus->ci->c_inf[idx].base + offset, &ret);
 
 	return ret;
 }
@@ -633,9 +633,9 @@ w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 	u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 	int ret;
 
-	brcmf_sdio_regwl(bus->sdiodev,
-			 bus->ci->c_inf[idx].base + reg_offset,
-			 regval, &ret);
+	brcmf_sdiod_regwl(bus->sdiodev,
+			  bus->ci->c_inf[idx].base + reg_offset,
+			  regval, &ret);
 
 	return ret;
 }
@@ -651,8 +651,8 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
 
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-			 wr_val, &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+			  wr_val, &err);
 	if (err) {
 		brcmf_err("SDIO_AOS KSO write error: %d\n", err);
 		return err;
@@ -682,15 +682,15 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
 		 * just one write attempt may fail,
 		 * read it back until it matches written value
 		 */
-		rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-					  &err);
+		rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+					   &err);
 		if (((rd_val & bmask) == cmp_val) && !err)
 			break;
 		brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n",
 			  try_cnt, MAX_KSO_ATTEMPTS, err);
 		udelay(KSO_WAIT_US);
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				 wr_val, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+				  wr_val, &err);
 	} while (try_cnt++ < MAX_KSO_ATTEMPTS);
 
 	return err;
@@ -721,16 +721,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		clkreq =
 		    bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				 clkreq, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  clkreq, &err);
 		if (err) {
 			brcmf_err("HT Avail request error: %d\n", err);
 			return -EBADE;
 		}
 
 		/* Check current status */
-		clkctl = brcmf_sdio_regrb(bus->sdiodev,
-					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_err("HT Avail read error: %d\n", err);
 			return -EBADE;
@@ -739,8 +739,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		/* Go to pending and await interrupt if appropriate */
 		if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 			/* Allow only clock-available interrupt */
-			devctl = brcmf_sdio_regrb(bus->sdiodev,
-						  SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_DEVICE_CTL, &err);
 			if (err) {
 				brcmf_err("Devctl error setting CA: %d\n",
 					  err);
@@ -748,28 +748,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 			}
 
 			devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					 devctl, &err);
+			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					  devctl, &err);
 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 			bus->clkstate = CLK_PENDING;
 
 			return 0;
 		} else if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdio_regrb(bus->sdiodev,
-						  SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					 devctl, &err);
+			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					  devctl, &err);
 		}
 
 		/* Otherwise, wait here (polling) for HT Avail */
 		timeout = jiffies +
 			  msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 		while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-			clkctl = brcmf_sdio_regrb(bus->sdiodev,
-						  SBSDIO_FUNC1_CHIPCLKCSR,
-						  &err);
+			clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_FUNC1_CHIPCLKCSR,
+						   &err);
 			if (time_after(jiffies, timeout))
 				break;
 			else
@@ -802,16 +802,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 
 		if (bus->clkstate == CLK_PENDING) {
 			/* Cancel CA-only interrupt filter */
-			devctl = brcmf_sdio_regrb(bus->sdiodev,
-						  SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_DEVICE_CTL, &err);
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					 devctl, &err);
+			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					  devctl, &err);
 		}
 
 		bus->clkstate = CLK_SDONLY;
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				 clkreq, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  clkreq, &err);
 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 		if (err) {
 			brcmf_err("Failed access turning clock off: %d\n",
@@ -1037,18 +1037,18 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 		  rtx ? ", send NAK" : "");
 
 	if (abort)
-		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
+		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-			 SFC_RF_TERM, &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+			  SFC_RF_TERM, &err);
 	bus->sdcnt.f1regdata++;
 
 	/* Wait until the packet has been flushed (device/FIFO stable) */
 	for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-		hi = brcmf_sdio_regrb(bus->sdiodev,
-				      SBSDIO_FUNC1_RFRAMEBCHI, &err);
-		lo = brcmf_sdio_regrb(bus->sdiodev,
-				      SBSDIO_FUNC1_RFRAMEBCLO, &err);
+		hi = brcmf_sdiod_regrb(bus->sdiodev,
+				       SBSDIO_FUNC1_RFRAMEBCHI, &err);
+		lo = brcmf_sdiod_regrb(bus->sdiodev,
+				       SBSDIO_FUNC1_RFRAMEBCLO, &err);
 		bus->sdcnt.f1regdata += 2;
 
 		if ((hi == 0) && (lo == 0))
@@ -1418,9 +1418,10 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		 * packet and and copy into the chain.
 		 */
 		sdio_claim_host(bus->sdiodev->func[1]);
-		errcode = brcmf_sdcard_recv_chain(bus->sdiodev,
-				bus->sdiodev->sbwad,
-				SDIO_FUNC_2, F2SYNC, &bus->glom, dlen);
+		errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
+						 bus->sdiodev->sbwad,
+						 SDIO_FUNC_2, F2SYNC,
+						 &bus->glom, dlen);
 		sdio_release_host(bus->sdiodev->func[1]);
 		bus->sdcnt.f2rxdata++;
 
@@ -1614,10 +1615,8 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 	}
 
 	/* Read remain of frame body */
-	sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
-				bus->sdiodev->sbwad,
-				SDIO_FUNC_2,
-				F2SYNC, rbuf, rdlen);
+	sdret = brcmf_sdiod_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
+				     SDIO_FUNC_2, F2SYNC, rbuf, rdlen);
 	bus->sdcnt.f2rxdata++;
 
 	/* Control frame failures need retransmission */
@@ -1702,11 +1701,10 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 		/* read header first for unknow frame length */
 		sdio_claim_host(bus->sdiodev->func[1]);
 		if (!rd->len) {
-			ret = brcmf_sdcard_recv_buf(bus->sdiodev,
-						      bus->sdiodev->sbwad,
-						      SDIO_FUNC_2, F2SYNC,
-						      bus->rxhdr,
-						      BRCMF_FIRSTREAD);
+			ret = brcmf_sdiod_recv_buf(bus->sdiodev,
+						   bus->sdiodev->sbwad,
+						   SDIO_FUNC_2, F2SYNC,
+						   bus->rxhdr, BRCMF_FIRSTREAD);
 			bus->sdcnt.f2rxhdrs++;
 			if (ret < 0) {
 				brcmf_err("RXHEADER FAILED: %d\n",
@@ -1762,8 +1760,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 		skb_pull(pkt, head_read);
 		pkt_align(pkt, rd->len_left, bus->head_align);
 
-		ret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
-					      SDIO_FUNC_2, F2SYNC, pkt);
+		ret = brcmf_sdiod_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
+					   SDIO_FUNC_2, F2SYNC, pkt);
 		bus->sdcnt.f2rxdata++;
 		sdio_release_host(bus->sdiodev->func[1]);
 
@@ -2118,8 +2116,8 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		goto done;
 
 	sdio_claim_host(bus->sdiodev->func[1]);
-	ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
-				    SDIO_FUNC_2, F2SYNC, pktq);
+	ret = brcmf_sdiod_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
+				   SDIO_FUNC_2, F2SYNC, pktq);
 	bus->sdcnt.f2txdata++;
 
 	if (ret < 0) {
@@ -2128,17 +2126,17 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 			  ret);
 		bus->sdcnt.tx_sderrs++;
 
-		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-				 SFC_WF_TERM, NULL);
+		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+				  SFC_WF_TERM, NULL);
 		bus->sdcnt.f1regdata++;
 
 		for (i = 0; i < 3; i++) {
 			u8 hi, lo;
-			hi = brcmf_sdio_regrb(bus->sdiodev,
-					      SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-			lo = brcmf_sdio_regrb(bus->sdiodev,
-					      SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+			hi = brcmf_sdiod_regrb(bus->sdiodev,
+					       SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+			lo = brcmf_sdiod_regrb(bus->sdiodev,
+					       SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 			bus->sdcnt.f1regdata += 2;
 			if ((hi == 0) && (lo == 0))
 				break;
@@ -2251,11 +2249,11 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdio_regrb(bus->sdiodev,
-				   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdiod_regrb(bus->sdiodev,
+				    SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				 (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err)
 		brcmf_err("Failed to force clock for F2: err %d\n", err);
@@ -2316,7 +2314,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	addr = bus->ci->c_inf[idx].base +
 	       offsetof(struct sdpcmd_regs, intstatus);
 
-	val = brcmf_sdio_regrl(bus->sdiodev, addr, &ret);
+	val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 	bus->sdcnt.f1regdata++;
 	if (ret != 0)
 		val = 0;
@@ -2326,7 +2324,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 
 	/* Clear interrupts */
 	if (val) {
-		brcmf_sdio_regwl(bus->sdiodev, addr, val, &ret);
+		brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
 		bus->sdcnt.f1regdata++;
 	}
 
@@ -2359,8 +2357,8 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 
 #ifdef DEBUG
 		/* Check for inconsistent device control */
-		devctl = brcmf_sdio_regrb(bus->sdiodev,
-					  SBSDIO_DEVICE_CTL, &err);
+		devctl = brcmf_sdiod_regrb(bus->sdiodev,
+					   SBSDIO_DEVICE_CTL, &err);
 		if (err) {
 			brcmf_err("error reading DEVCTL: %d\n", err);
 			bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
@@ -2368,8 +2366,8 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
-		clkctl = brcmf_sdio_regrb(bus->sdiodev,
-					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 		if (err) {
 			brcmf_err("error reading CSR: %d\n",
 				  err);
@@ -2380,16 +2378,16 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 			  devctl, clkctl);
 
 		if (SBSDIO_HTAV(clkctl)) {
-			devctl = brcmf_sdio_regrb(bus->sdiodev,
-						  SBSDIO_DEVICE_CTL, &err);
+			devctl = brcmf_sdiod_regrb(bus->sdiodev,
+						   SBSDIO_DEVICE_CTL, &err);
 			if (err) {
 				brcmf_err("error reading DEVCTL: %d\n",
 					  err);
 				bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 			}
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
-			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
-					 devctl, &err);
+			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+					  devctl, &err);
 			if (err) {
 				brcmf_err("error writing DEVCTL: %d\n",
 					  err);
@@ -2483,9 +2481,10 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		int i;
 
 		sdio_claim_host(bus->sdiodev->func[1]);
-		err = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
-			SDIO_FUNC_2, F2SYNC, bus->ctrl_frame_buf,
-			(u32) bus->ctrl_frame_len);
+		err = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
+					   SDIO_FUNC_2, F2SYNC,
+					   bus->ctrl_frame_buf,
+					   (u32)bus->ctrl_frame_len);
 
 		if (err < 0) {
 			/* On failure, abort the command and
@@ -2494,20 +2493,20 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 				  err);
 			bus->sdcnt.tx_sderrs++;
 
-			brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
+			brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 
-			brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-					 SFC_WF_TERM, &err);
+			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+					  SFC_WF_TERM, &err);
 			bus->sdcnt.f1regdata++;
 
 			for (i = 0; i < 3; i++) {
 				u8 hi, lo;
-				hi = brcmf_sdio_regrb(bus->sdiodev,
-						      SBSDIO_FUNC1_WFRAMEBCHI,
-						      &err);
-				lo = brcmf_sdio_regrb(bus->sdiodev,
-						      SBSDIO_FUNC1_WFRAMEBCLO,
-						      &err);
+				hi = brcmf_sdiod_regrb(bus->sdiodev,
+						       SBSDIO_FUNC1_WFRAMEBCHI,
+						       &err);
+				lo = brcmf_sdiod_regrb(bus->sdiodev,
+						       SBSDIO_FUNC1_WFRAMEBCLO,
+						       &err);
 				bus->sdcnt.f1regdata += 2;
 				if ((hi == 0) && (lo == 0))
 					break;
@@ -2631,8 +2630,8 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
 
 	/* Read console log struct */
 	addr = bus->console_addr + offsetof(struct rte_console, log_le);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
-			      sizeof(c->log_le));
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
+			       sizeof(c->log_le));
 	if (rv < 0)
 		return rv;
 
@@ -2657,7 +2656,7 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
 
 	/* Read the console buffer */
 	addr = le32_to_cpu(c->log_le.buf);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
 	if (rv < 0)
 		return rv;
 
@@ -2701,8 +2700,8 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 	int ret;
 
 	bus->ctrl_frame_stat = false;
-	ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
-				    SDIO_FUNC_2, F2SYNC, frame, len);
+	ret = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
+				   SDIO_FUNC_2, F2SYNC, frame, len);
 
 	if (ret < 0) {
 		/* On failure, abort the command and terminate the frame */
@@ -2710,18 +2709,18 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 			  ret);
 		bus->sdcnt.tx_sderrs++;
 
-		brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
+		brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
-				 SFC_WF_TERM, NULL);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+				  SFC_WF_TERM, NULL);
 		bus->sdcnt.f1regdata++;
 
 		for (i = 0; i < 3; i++) {
 			u8 hi, lo;
-			hi = brcmf_sdio_regrb(bus->sdiodev,
-					      SBSDIO_FUNC1_WFRAMEBCHI, NULL);
-			lo = brcmf_sdio_regrb(bus->sdiodev,
-					      SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+			hi = brcmf_sdiod_regrb(bus->sdiodev,
+					       SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+			lo = brcmf_sdiod_regrb(bus->sdiodev,
+					       SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 			bus->sdcnt.f1regdata += 2;
 			if (hi == 0 && lo == 0)
 				break;
@@ -2868,7 +2867,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	 */
 	sdio_claim_host(bus->sdiodev->func[1]);
 	brcmf_sdbrcm_bus_sleep(bus, false, false);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
 	sdio_release_host(bus->sdiodev->func[1]);
 	if (rv < 0)
 		return rv;
@@ -2888,8 +2887,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	}
 
 	/* Read hndrte_shared structure */
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
-			      sizeof(struct sdpcm_shared_le));
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
+			       sizeof(struct sdpcm_shared_le));
 	if (rv < 0)
 		return rv;
 
@@ -2925,22 +2924,22 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
 
 	/* obtain console information from device memory */
 	addr = sh->console_addr + offsetof(struct rte_console, log_le);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
-			      (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+			       (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_ptr = le32_to_cpu(sh_val);
 
 	addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
-			      (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+			       (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_size = le32_to_cpu(sh_val);
 
 	addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, addr,
-			      (u8 *)&sh_val, sizeof(u32));
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+			       (u8 *)&sh_val, sizeof(u32));
 	if (rv < 0)
 		return rv;
 	console_index = le32_to_cpu(sh_val);
@@ -2954,8 +2953,8 @@ static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
 
 	/* obtain the console data from device */
 	conbuf[console_size] = '\0';
-	rv = brcmf_sdio_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
-			      console_size);
+	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
+			       console_size);
 	if (rv < 0)
 		goto done;
 
@@ -2992,8 +2991,8 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh,
 		return 0;
 	}
 
-	error = brcmf_sdio_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr,
-				 sizeof(struct brcmf_trap_info));
+	error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr,
+				  sizeof(struct brcmf_trap_info));
 	if (error < 0)
 		return error;
 
@@ -3036,14 +3035,14 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus,
 
 	sdio_claim_host(bus->sdiodev->func[1]);
 	if (sh->assert_file_addr != 0) {
-		error = brcmf_sdio_ramrw(bus->sdiodev, false,
-					 sh->assert_file_addr, (u8 *)file, 80);
+		error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+					  sh->assert_file_addr, (u8 *)file, 80);
 		if (error < 0)
 			return error;
 	}
 	if (sh->assert_exp_addr != 0) {
-		error = brcmf_sdio_ramrw(bus->sdiodev, false,
-					 sh->assert_exp_addr, (u8 *)expr, 80);
+		error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+					  sh->assert_exp_addr, (u8 *)expr, 80);
 		if (error < 0)
 			return error;
 	}
@@ -3248,8 +3247,8 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
 	while (offset < fw->size) {
 		len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK :
 		      fw->size - offset;
-		err = brcmf_sdio_ramrw(bus->sdiodev, true, address,
-				       (u8 *)&fw->data[offset], len);
+		err = brcmf_sdiod_ramrw(bus->sdiodev, true, address,
+					(u8 *)&fw->data[offset], len);
 		if (err) {
 			brcmf_err("error %d on writing %d membytes at 0x%08x\n",
 				  err, len, address);
@@ -3399,9 +3398,9 @@ static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus)
 
 	/* read PMU chipcontrol register 3*/
 	addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr);
-	brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL);
+	brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL);
 	addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data);
-	reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL);
+	reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL);
 
 	return (bool)reg;
 }
@@ -3413,33 +3412,31 @@ static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
-			       &err);
+	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL,
-			 val, &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
 
 	/* Add CMD14 Support */
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
-			 (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-			  SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
-			 &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+			  (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+			   SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+			  &err);
 	if (err) {
 		brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
 		return;
 	}
 
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			 SBSDIO_FORCE_HT, &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+			  SBSDIO_FORCE_HT, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 		return;
@@ -3462,8 +3459,7 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
 	if (bus->ci->c_inf[1].rev < 12)
 		return 0;
 
-	val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-			       &err);
+	val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
 		return err;
@@ -3472,8 +3468,8 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
 	if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
 		val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
 			SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
-				 val, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+				  val, &err);
 		if (err) {
 			brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
 			return err;
@@ -3592,11 +3588,11 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		goto exit;
 
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdio_regrb(bus->sdiodev,
-				   SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	saveclk = brcmf_sdiod_regrb(bus->sdiodev,
+				    SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				 (saveclk | SBSDIO_FORCE_HT), &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  (saveclk | SBSDIO_FORCE_HT), &err);
 	}
 	if (err) {
 		brcmf_err("Failed to force clock for F2: err %d\n", err);
@@ -3618,7 +3614,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		w_sdreg32(bus, bus->hostintmask,
 			  offsetof(struct sdpcmd_regs, hostintmask));
 
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
 		sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
@@ -3629,12 +3625,12 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		brcmf_sdbrcm_sr_init(bus);
 	} else {
 		/* Restore previous clock setting */
-		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				 saveclk, &err);
+		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  saveclk, &err);
 	}
 
 	if (ret == 0) {
-		ret = brcmf_sdio_intr_register(bus->sdiodev);
+		ret = brcmf_sdiod_intr_register(bus->sdiodev);
 		if (ret != 0)
 			brcmf_err("intr register failed:%d\n", ret);
 	}
@@ -3704,9 +3700,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 				u8 devpend;
 
 				sdio_claim_host(bus->sdiodev->func[1]);
-				devpend = brcmf_sdio_regrb(bus->sdiodev,
-							   SDIO_CCCR_INTx,
-							   NULL);
+				devpend = brcmf_sdiod_regrb(bus->sdiodev,
+							    SDIO_CCCR_INTx,
+							    NULL);
 				sdio_release_host(bus->sdiodev->func[1]);
 				intstatus =
 				    devpend & (INTR_STATUS_FUNC1 |
@@ -3814,18 +3810,18 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus)
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
-		 brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
+		 brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
 	 * Force PLL off until brcmf_sdio_chip_attach()
 	 * programs PLL control regs
 	 */
 
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			 BRCMF_INIT_CLKCTL1, &err);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+			  BRCMF_INIT_CLKCTL1, &err);
 	if (!err)
-		clkctl = brcmf_sdio_regrb(bus->sdiodev,
-					  SBSDIO_FUNC1_CHIPCLKCSR, &err);
+		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 	if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
 		brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
@@ -3857,33 +3853,33 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus)
 	}
 
 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
-	reg_val = brcmf_sdio_regrb(bus->sdiodev,
-				   SDIO_CCCR_BRCM_CARDCTRL, &err);
+	reg_val = brcmf_sdiod_regrb(bus->sdiodev,
+				    SDIO_CCCR_BRCM_CARDCTRL, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
 
-	brcmf_sdio_regwb(bus->sdiodev,
-			 SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+	brcmf_sdiod_regwb(bus->sdiodev,
+			  SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 	if (err)
 		goto fail;
 
 	/* set PMUControl so a backplane reset does PMU state reload */
 	reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base,
 			       pmucontrol);
-	reg_val = brcmf_sdio_regrl(bus->sdiodev,
-				   reg_addr,
-				   &err);
+	reg_val = brcmf_sdiod_regrl(bus->sdiodev,
+				    reg_addr,
+				    &err);
 	if (err)
 		goto fail;
 
 	reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 
-	brcmf_sdio_regwl(bus->sdiodev,
-			 reg_addr,
-			 reg_val,
-			 &err);
+	brcmf_sdiod_regwl(bus->sdiodev,
+			  reg_addr,
+			  reg_val,
+			  &err);
 	if (err)
 		goto fail;
 
@@ -3926,7 +3922,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
-	brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 
 	sdio_release_host(bus->sdiodev->func[1]);
 
@@ -4005,7 +4001,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 
 	if (bus) {
 		/* De-register interrupt handler */
-		brcmf_sdio_intr_unregister(bus->sdiodev);
+		brcmf_sdiod_intr_unregister(bus->sdiodev);
 
 		cancel_work_sync(&bus->datawork);
 		if (bus->brcmf_wq)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index b612808df94f..5f39f28e6efb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -112,9 +112,9 @@ brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev,
 
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbidhigh),
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbidhigh),
+				    NULL);
 	return SBCOREREV(regdata);
 }
 
@@ -140,9 +140,9 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev,
 	if (idx == BRCMF_MAX_CORENUM)
 		return false;
 
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
 	regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT |
 		    SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK);
 	return (SSB_TMSLOW_CLOCK == regdata);
@@ -160,13 +160,13 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
 	if (idx == BRCMF_MAX_CORENUM)
 		return false;
 
-	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				    NULL);
 	ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK;
 
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				    NULL);
 	ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0);
 
 	return ret;
@@ -182,79 +182,79 @@ brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
 	idx = brcmf_sdio_chip_getinfidx(ci, coreid);
 	base = ci->c_inf[idx].base;
 
-	regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
 	if (regdata & SSB_TMSLOW_RESET)
 		return;
 
-	regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL);
 	if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
 		/*
 		 * set target reject and spin until busy is clear
 		 * (preserve core-specific bits)
 		 */
-		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
-					   NULL);
-		brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				 regdata | SSB_TMSLOW_REJECT, NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
+		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				  regdata | SSB_TMSLOW_REJECT, NULL);
 
-		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
-					   NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
 		udelay(1);
-		SPINWAIT((brcmf_sdio_regrl(sdiodev,
-					   CORE_SB(base, sbtmstatehigh),
-					   NULL) &
-			SSB_TMSHIGH_BUSY), 100000);
-
-		regdata = brcmf_sdio_regrl(sdiodev,
-					   CORE_SB(base, sbtmstatehigh),
-					   NULL);
+		SPINWAIT((brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatehigh),
+					    NULL) &
+			  SSB_TMSHIGH_BUSY), 100000);
+
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatehigh),
+					    NULL);
 		if (regdata & SSB_TMSHIGH_BUSY)
 			brcmf_err("core state still busy\n");
 
-		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow),
-					   NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
+					    NULL);
 		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdio_regrl(sdiodev,
-						   CORE_SB(base, sbimstate),
-						   NULL);
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
 			regdata |= SSB_IMSTATE_REJECT;
-			brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
-					 regdata, NULL);
-			regdata = brcmf_sdio_regrl(sdiodev,
-						   CORE_SB(base, sbimstate),
-						   NULL);
+			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
+					  regdata, NULL);
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
 			udelay(1);
-			SPINWAIT((brcmf_sdio_regrl(sdiodev,
-						   CORE_SB(base, sbimstate),
-						   NULL) &
-				SSB_IMSTATE_BUSY), 100000);
+			SPINWAIT((brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL) &
+				  SSB_IMSTATE_BUSY), 100000);
 		}
 
 		/* set reset and reject while enabling the clocks */
 		regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 			  SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET;
-		brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-				 regdata, NULL);
-		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow),
-					   NULL);
+		brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+				  regdata, NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev,
+					    CORE_SB(base, sbtmstatelow), NULL);
 		udelay(10);
 
 		/* clear the initiator reject bit */
-		regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow),
-					   NULL);
+		regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow),
+					    NULL);
 		if (regdata & SSB_IDLOW_INITIATOR) {
-			regdata = brcmf_sdio_regrl(sdiodev,
-						   CORE_SB(base, sbimstate),
-						   NULL);
+			regdata = brcmf_sdiod_regrl(sdiodev,
+						    CORE_SB(base, sbimstate),
+						    NULL);
 			regdata &= ~SSB_IMSTATE_REJECT;
-			brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate),
-					 regdata, NULL);
+			brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate),
+					  regdata, NULL);
 		}
 	}
 
 	/* leave reset and reject asserted */
-	brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
-			 (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow),
+			  (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL);
 	udelay(1);
 }
 
@@ -270,9 +270,9 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
 		return;
 
 	/* if core is already in reset, just return */
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				    NULL);
 	if ((regdata & BCMA_RESET_CTL_RESET) != 0)
 		return;
 
@@ -281,24 +281,24 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
 	 * extra 10ms is taken into account for firmware load stage
 	 * after 10300us carry on disabling the core anyway
 	 */
-	SPINWAIT(brcmf_sdio_regrl(sdiodev,
-				  ci->c_inf[idx].wrapbase+BCMA_RESET_ST,
-				  NULL), 10300);
-	regdata = brcmf_sdio_regrl(sdiodev,
+	SPINWAIT(brcmf_sdiod_regrl(sdiodev,
 				   ci->c_inf[idx].wrapbase+BCMA_RESET_ST,
-				   NULL);
+				   NULL), 10300);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    ci->c_inf[idx].wrapbase+BCMA_RESET_ST,
+				    NULL);
 	if (regdata)
 		brcmf_err("disabling core 0x%x with reset status %x\n",
 			  coreid, regdata);
 
-	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-			 BCMA_RESET_CTL_RESET, NULL);
+	brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+			  BCMA_RESET_CTL_RESET, NULL);
 	udelay(1);
 
-	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			 core_bits, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+			  core_bits, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				    NULL);
 	usleep_range(10, 20);
 
 }
@@ -325,47 +325,47 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev,
 	 * set reset while enabling the clock and
 	 * forcing them on throughout the core
 	 */
-	brcmf_sdio_regwl(sdiodev,
-			 CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
-			 NULL);
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev,
+			  CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET,
+			  NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
 	udelay(1);
 
 	/* clear any serror */
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				    NULL);
 	if (regdata & SSB_TMSHIGH_SERR)
-		brcmf_sdio_regwl(sdiodev,
-				 CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
-				 0, NULL);
+		brcmf_sdiod_regwl(sdiodev,
+				  CORE_SB(ci->c_inf[idx].base, sbtmstatehigh),
+				  0, NULL);
 
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbimstate),
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbimstate),
+				    NULL);
 	if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
-		brcmf_sdio_regwl(sdiodev,
-				 CORE_SB(ci->c_inf[idx].base, sbimstate),
-				 regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
-				 NULL);
+		brcmf_sdiod_regwl(sdiodev,
+				  CORE_SB(ci->c_inf[idx].base, sbimstate),
+				  regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO),
+				  NULL);
 
 	/* clear reset and allow it to propagate throughout the core */
-	brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
 	udelay(1);
 
 	/* leave clock enabled */
-	brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-			 SSB_TMSLOW_CLOCK, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+			  SSB_TMSLOW_CLOCK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
+				    NULL);
 	udelay(1);
 }
 
@@ -384,21 +384,21 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev,
 	brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, core_bits);
 
 	/* now do initialization sequence */
-	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			 core_bits | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				   NULL);
-	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-			 0, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+			  core_bits | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				    NULL);
+	brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+			  0, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
+				    NULL);
 	udelay(1);
 
-	brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-			 core_bits | BCMA_IOCTL_CLK, NULL);
-	regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
-				   NULL);
+	brcmf_sdiod_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+			  core_bits | BCMA_IOCTL_CLK, NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
+				    NULL);
 	udelay(1);
 }
 
@@ -450,9 +450,9 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 	 */
 	ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON;
 	ci->c_inf[0].base = SI_ENUM_BASE;
-	regdata = brcmf_sdio_regrl(sdiodev,
-				   CORE_CC_REG(ci->c_inf[0].base, chipid),
-				   NULL);
+	regdata = brcmf_sdiod_regrl(sdiodev,
+				    CORE_CC_REG(ci->c_inf[0].base, chipid),
+				    NULL);
 	ci->chip = regdata & CID_ID_MASK;
 	ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT;
 	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
@@ -607,7 +607,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 
 	/* Try forcing SDIO core to do ALPAvail request only */
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
-	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	if (err) {
 		brcmf_err("error writing for HT off\n");
 		return err;
@@ -615,8 +615,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 
 	/* If register supported, wait for ALPAvail and then force ALP */
 	/* This may take up to 15 milliseconds */
-	clkval = brcmf_sdio_regrb(sdiodev,
-				  SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+	clkval = brcmf_sdiod_regrb(sdiodev,
+				   SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 
 	if ((clkval & ~SBSDIO_AVBITS) != clkset) {
 		brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
@@ -624,8 +624,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 		return -EACCES;
 	}
 
-	SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev,
-					     SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+	SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
+					      SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
 			!SBSDIO_ALPAV(clkval)),
 			PMU_MAX_TRANSITION_DLY);
 	if (!SBSDIO_ALPAV(clkval)) {
@@ -635,11 +635,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
-	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 	udelay(65);
 
 	/* Also, disable the extra SDIO pull-ups */
-	brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 
 	return 0;
 }
@@ -654,16 +654,16 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
 	ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
 
 	/* get chipcommon capabilites */
-	ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev,
-					     CORE_CC_REG(base, capabilities),
-					     NULL);
+	ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev,
+					      CORE_CC_REG(base, capabilities),
+					      NULL);
 
 	/* get pmu caps & rev */
 	if (ci->c_inf[0].caps & CC_CAP_PMU) {
 		ci->pmucaps =
-			brcmf_sdio_regrl(sdiodev,
-					 CORE_CC_REG(base, pmucapabilities),
-					 NULL);
+			brcmf_sdiod_regrl(sdiodev,
+					  CORE_CC_REG(base, pmucapabilities),
+					  NULL);
 		ci->pmurev = ci->pmucaps & PCAP_REV_MASK;
 	}
 
@@ -703,10 +703,10 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
 
 	brcmf_sdio_chip_buscoresetup(sdiodev, ci);
 
-	brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
-			 0, NULL);
-	brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
-			 0, NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup),
+			  0, NULL);
+	brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown),
+			  0, NULL);
 
 	*ci_ptr = ci;
 	return 0;
@@ -784,12 +784,12 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
 			}
 		}
 		addr = CORE_CC_REG(base, chipcontrol_addr);
-		brcmf_sdio_regwl(sdiodev, addr, 1, NULL);
-		cc_data_temp = brcmf_sdio_regrl(sdiodev, addr, NULL);
+		brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
+		cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
 		cc_data_temp &= ~str_mask;
 		drivestrength_sel <<= str_shift;
 		cc_data_temp |= drivestrength_sel;
-		brcmf_sdio_regwl(sdiodev, addr, cc_data_temp, NULL);
+		brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
 
 		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
 			  str_tab[i].strength, drivestrength, cc_data_temp);
@@ -816,8 +816,8 @@ brcmf_sdio_chip_verifynvram(struct brcmf_sdio_dev *sdiodev, u32 nvram_addr,
 	memset(nvram_ularray, 0xaa, nvram_sz);
 
 	/* Read the vars list to temp buffer for comparison */
-	err = brcmf_sdio_ramrw(sdiodev, false, nvram_addr, nvram_ularray,
-			       nvram_sz);
+	err = brcmf_sdiod_ramrw(sdiodev, false, nvram_addr, nvram_ularray,
+				nvram_sz);
 	if (err) {
 		brcmf_err("error %d on reading %d nvram bytes at 0x%08x\n",
 			  err, nvram_sz, nvram_addr);
@@ -850,7 +850,7 @@ static bool brcmf_sdio_chip_writenvram(struct brcmf_sdio_dev *sdiodev,
 	nvram_addr = (ci->ramsize - 4) - nvram_sz + ci->rambase;
 
 	/* Write the vars list */
-	err = brcmf_sdio_ramrw(sdiodev, true, nvram_addr, nvram_dat, nvram_sz);
+	err = brcmf_sdiod_ramrw(sdiodev, true, nvram_addr, nvram_dat, nvram_sz);
 	if (err) {
 		brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n",
 			  err, nvram_sz, nvram_addr);
@@ -874,8 +874,8 @@ static bool brcmf_sdio_chip_writenvram(struct brcmf_sdio_dev *sdiodev,
 		  nvram_addr, nvram_sz, token);
 
 	/* Write the length token to the last word */
-	if (brcmf_sdio_ramrw(sdiodev, true, (ci->ramsize - 4 + ci->rambase),
-			     (u8 *)&token_le, 4))
+	if (brcmf_sdiod_ramrw(sdiodev, true, (ci->ramsize - 4 + ci->rambase),
+			      (u8 *)&token_le, 4))
 		return false;
 
 	return true;
@@ -891,7 +891,7 @@ brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev,
 	ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0);
 
 	/* clear length token */
-	brcmf_sdio_ramrw(sdiodev, true, ci->ramsize - 4, (u8 *)&zeros, 4);
+	brcmf_sdiod_ramrw(sdiodev, true, ci->ramsize - 4, (u8 *)&zeros, 4);
 }
 
 static bool
@@ -913,7 +913,7 @@ brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci,
 	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
 	reg_addr = ci->c_inf[core_idx].base;
 	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
 	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0);
 
@@ -942,11 +942,11 @@ brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci,
 	core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV);
 	reg_addr = ci->c_inf[core_idx].base;
 	reg_addr += offsetof(struct sdpcmd_regs, intstatus);
-	brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 
 	/* Write reset vector to address 0 */
-	brcmf_sdio_ramrw(sdiodev, true, 0, (void *)&ci->rst_vec,
-			 sizeof(ci->rst_vec));
+	brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&ci->rst_vec,
+			  sizeof(ci->rst_vec));
 
 	/* restore ARM */
 	ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, 0);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 414aa16a587c..4d71eb087a06 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -184,16 +184,16 @@ struct brcmf_sdio_dev {
 };
 
 /* Register/deregister interrupt handler. */
-int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
-int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
+int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
+int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
 /* sdio device register access interface */
-u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
-		      int *ret);
-void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
-		      int *ret);
+u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
+		       int *ret);
+void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+		       int *ret);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
@@ -207,17 +207,17 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
  * Returns 0 or error code.
  * NOTE: Async operation is not currently supported.
  */
-int brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			  uint flags, struct sk_buff_head *pktq);
-int brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			  uint flags, u8 *buf, uint nbytes);
-
-int brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			  uint flags, struct sk_buff *pkt);
-int brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			  uint flags, u8 *buf, uint nbytes);
-int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			    uint flags, struct sk_buff_head *pktq, uint totlen);
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			 uint flags, struct sk_buff_head *pktq);
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			 uint flags, u8 *buf, uint nbytes);
+
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			 uint flags, struct sk_buff *pkt);
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			 uint flags, u8 *buf, uint nbytes);
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+			   uint flags, struct sk_buff_head *pktq, uint totlen);
 
 /* Flags bits */
 
@@ -233,11 +233,11 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
  *   nbytes:   number of bytes to transfer to/from buf
  * Returns 0 or error code.
  */
-int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
-		     u8 *data, uint size);
+int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+		      u8 *data, uint size);
 
 /* Issue an abort to the specified function */
-int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
 struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdbrcm_disconnect(struct brcmf_sdio *bus);
-- 
cgit v1.2.3


From a7cdd821e37fa5809ce1fb3793ab0e0e7e6e9d75 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:58:59 +0100
Subject: brcmfmac: reduce function parameters in sdio send/receive calls

The SDIO send and receive functions in bcmsdh.c are always called
with the same parameters. For the driver there is no use-case
to call them otherwise so remove those parameters from function
prototypes.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   | 73 ++++++++++------------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 20 ++----
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    | 20 +++---
 3 files changed, 46 insertions(+), 67 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 981ca9277117..cf21631440cc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -679,9 +679,7 @@ exit:
 	return ret;
 }
 
-int
-brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		     uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
 	int err;
@@ -693,7 +691,7 @@ brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		return -EIO;
 	}
 
-	err = brcmf_sdiod_recv_pkt(sdiodev, addr, fn, flags, mypkt);
+	err = brcmf_sdiod_recv_pkt(sdiodev, mypkt);
 	if (!err)
 		memcpy(buf, mypkt->data, nbytes);
 
@@ -701,50 +699,47 @@ brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	return err;
 }
 
-int
-brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		     uint flags, struct sk_buff *pkt)
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
 {
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err = 0;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pkt->len);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		goto done;
 
-	err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pkt);
+	err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);
 
 done:
 	return err;
 }
 
-int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			   uint flags, struct sk_buff_head *pktq, uint totlen)
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+			   struct sk_buff_head *pktq, uint totlen)
 {
 	struct sk_buff *glom_skb;
 	struct sk_buff *skb;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err = 0;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pktq->qlen);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
+		  addr, pktq->qlen);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		goto done;
 
 	if (pktq->qlen == 1)
-		err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pktq->next);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+					 pktq->next);
 	else if (!sdiodev->sg_support) {
 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
 		if (!glom_skb)
 			return -ENOMEM;
-		err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, glom_skb);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+					 glom_skb);
 		if (err)
 			goto done;
 
@@ -753,18 +748,17 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 			skb_pull(glom_skb, skb->len);
 		}
 	} else
-		err = brcmf_sdiod_sglist_rw(sdiodev, fn, false, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
+					    pktq);
 
 done:
 	return err;
 }
 
-int
-brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		     uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -776,41 +770,40 @@ brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 
 	memcpy(mypkt->data, buf, nbytes);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 
 	if (!err)
-		err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, mypkt);
+		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
+					 mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
 
 }
 
-int
-brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-		     uint flags, struct sk_buff_head *pktq)
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+			 struct sk_buff_head *pktq)
 {
 	struct sk_buff *skb;
-	uint width;
+	u32 addr = sdiodev->sbwad;
 	int err;
 
-	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
-		  fn, addr, pktq->qlen);
+	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
 
-	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
 	if (err)
 		return err;
 
 	if (pktq->qlen == 1 || !sdiodev->sg_support)
 		skb_queue_walk(pktq, skb) {
-			err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, skb);
+			err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
+						 addr, skb);
 			if (err)
 				break;
 		}
 	else
-		err = brcmf_sdiod_sglist_rw(sdiodev, fn, true, addr, pktq);
+		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
+					    pktq);
 
 	return err;
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 3d8a1a8d54fe..7fff4cc3166f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1419,8 +1419,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		 */
 		sdio_claim_host(bus->sdiodev->func[1]);
 		errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
-						 bus->sdiodev->sbwad,
-						 SDIO_FUNC_2, F2SYNC,
 						 &bus->glom, dlen);
 		sdio_release_host(bus->sdiodev->func[1]);
 		bus->sdcnt.f2rxdata++;
@@ -1615,8 +1613,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 	}
 
 	/* Read remain of frame body */
-	sdret = brcmf_sdiod_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
-				     SDIO_FUNC_2, F2SYNC, rbuf, rdlen);
+	sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen);
 	bus->sdcnt.f2rxdata++;
 
 	/* Control frame failures need retransmission */
@@ -1702,8 +1699,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 		sdio_claim_host(bus->sdiodev->func[1]);
 		if (!rd->len) {
 			ret = brcmf_sdiod_recv_buf(bus->sdiodev,
-						   bus->sdiodev->sbwad,
-						   SDIO_FUNC_2, F2SYNC,
 						   bus->rxhdr, BRCMF_FIRSTREAD);
 			bus->sdcnt.f2rxhdrs++;
 			if (ret < 0) {
@@ -1760,8 +1755,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 		skb_pull(pkt, head_read);
 		pkt_align(pkt, rd->len_left, bus->head_align);
 
-		ret = brcmf_sdiod_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
-					   SDIO_FUNC_2, F2SYNC, pkt);
+		ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt);
 		bus->sdcnt.f2rxdata++;
 		sdio_release_host(bus->sdiodev->func[1]);
 
@@ -2116,8 +2110,7 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		goto done;
 
 	sdio_claim_host(bus->sdiodev->func[1]);
-	ret = brcmf_sdiod_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
-				   SDIO_FUNC_2, F2SYNC, pktq);
+	ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
 	bus->sdcnt.f2txdata++;
 
 	if (ret < 0) {
@@ -2481,9 +2474,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		int i;
 
 		sdio_claim_host(bus->sdiodev->func[1]);
-		err = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
-					   SDIO_FUNC_2, F2SYNC,
-					   bus->ctrl_frame_buf,
+		err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf,
 					   (u32)bus->ctrl_frame_len);
 
 		if (err < 0) {
@@ -2700,8 +2691,7 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 	int ret;
 
 	bus->ctrl_frame_stat = false;
-	ret = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
-				   SDIO_FUNC_2, F2SYNC, frame, len);
+	ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
 
 	if (ret < 0) {
 		/* On failure, abort the command and terminate the frame */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 4d71eb087a06..4c70cf229f51 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -197,7 +197,6 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
- *   addr:     backplane address (i.e. >= regsva from attach)
  *   flags:    backplane width, address increment, sync/async
  *   buf:      pointer to memory data buffer
  *   nbytes:   number of bytes to transfer to/from buf
@@ -207,17 +206,14 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
  * Returns 0 or error code.
  * NOTE: Async operation is not currently supported.
  */
-int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			 uint flags, struct sk_buff_head *pktq);
-int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			 uint flags, u8 *buf, uint nbytes);
-
-int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			 uint flags, struct sk_buff *pkt);
-int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			 uint flags, u8 *buf, uint nbytes);
-int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			   uint flags, struct sk_buff_head *pktq, uint totlen);
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+			 struct sk_buff_head *pktq);
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+			   struct sk_buff_head *pktq, uint totlen);
 
 /* Flags bits */
 
-- 
cgit v1.2.3


From 8141083c48192b63a39b77adffd9a8e0dcfab034 Mon Sep 17 00:00:00 2001
From: Hante Meuleman
Date: Thu, 12 Dec 2013 11:59:00 +0100
Subject: brcmfmac: Move common BCDC code in single function.

The BCDC functions query_dcmd and set_dcmd both create a msgbuf to
be sent to dongle this code is very similar and for optimisation
best put in a function.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcdc.c | 68 ++++++++++----------------
 1 file changed, 25 insertions(+), 43 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
index 06848e426f9a..ee861427117e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
@@ -101,35 +101,41 @@ struct brcmf_proto_bcdc_header {
 					 * plus any space that might be needed
 					 * for bus alignment padding.
 					 */
-#define ROUND_UP_MARGIN	2048	/* Biggest bus block size possible for
-				 * round off at the end of buffer
-				 * Currently is SDIO
-				 */
-
 struct brcmf_bcdc {
 	u16 reqid;
 	u8 bus_header[BUS_HEADER_LEN];
 	struct brcmf_proto_bcdc_dcmd msg;
-	unsigned char buf[BRCMF_DCMD_MAXLEN + ROUND_UP_MARGIN];
+	unsigned char buf[BRCMF_DCMD_MAXLEN];
 };
 
-static int brcmf_proto_bcdc_msg(struct brcmf_pub *drvr)
+
+static int
+brcmf_proto_bcdc_msg(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
+		     uint len, bool set)
 {
 	struct brcmf_bcdc *bcdc = (struct brcmf_bcdc *)drvr->proto->pd;
-	int len = le32_to_cpu(bcdc->msg.len) +
-			sizeof(struct brcmf_proto_bcdc_dcmd);
+	struct brcmf_proto_bcdc_dcmd *msg = &bcdc->msg;
+	u32 flags;
 
 	brcmf_dbg(BCDC, "Enter\n");
 
-	/* NOTE : bcdc->msg.len holds the desired length of the buffer to be
-	 *        returned. Only up to BCDC_MAX_MSG_SIZE of this buffer area
-	 *        is actually sent to the dongle
-	 */
-	if (len > BCDC_MAX_MSG_SIZE)
-		len = BCDC_MAX_MSG_SIZE;
+	memset(msg, 0, sizeof(struct brcmf_proto_bcdc_dcmd));
+
+	msg->cmd = cpu_to_le32(cmd);
+	msg->len = cpu_to_le32(len);
+	flags = (++bcdc->reqid << BCDC_DCMD_ID_SHIFT);
+	if (set)
+		flags |= BCDC_DCMD_SET;
+	flags = (flags & ~BCDC_DCMD_IF_MASK) |
+		(ifidx << BCDC_DCMD_IF_SHIFT);
+	msg->flags = cpu_to_le32(flags);
+
+	if (buf)
+		memcpy(bcdc->buf, buf, len);
 
 	/* Send request */
-	return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&bcdc->msg, len);
+	return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&bcdc->msg,
+			       len + sizeof(struct brcmf_proto_bcdc_dcmd));
 }
 
 static int brcmf_proto_bcdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len)
@@ -161,19 +167,7 @@ brcmf_proto_bcdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
 
 	brcmf_dbg(BCDC, "Enter, cmd %d len %d\n", cmd, len);
 
-	memset(msg, 0, sizeof(struct brcmf_proto_bcdc_dcmd));
-
-	msg->cmd = cpu_to_le32(cmd);
-	msg->len = cpu_to_le32(len);
-	flags = (++bcdc->reqid << BCDC_DCMD_ID_SHIFT);
-	flags = (flags & ~BCDC_DCMD_IF_MASK) |
-		(ifidx << BCDC_DCMD_IF_SHIFT);
-	msg->flags = cpu_to_le32(flags);
-
-	if (buf)
-		memcpy(bcdc->buf, buf, len);
-
-	ret = brcmf_proto_bcdc_msg(drvr);
+	ret = brcmf_proto_bcdc_msg(drvr, ifidx, cmd, buf, len, false);
 	if (ret < 0) {
 		brcmf_err("brcmf_proto_bcdc_msg failed w/status %d\n",
 			  ret);
@@ -227,19 +221,7 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
 
 	brcmf_dbg(BCDC, "Enter, cmd %d len %d\n", cmd, len);
 
-	memset(msg, 0, sizeof(struct brcmf_proto_bcdc_dcmd));
-
-	msg->cmd = cpu_to_le32(cmd);
-	msg->len = cpu_to_le32(len);
-	flags = (++bcdc->reqid << BCDC_DCMD_ID_SHIFT) | BCDC_DCMD_SET;
-	flags = (flags & ~BCDC_DCMD_IF_MASK) |
-		(ifidx << BCDC_DCMD_IF_SHIFT);
-	msg->flags = cpu_to_le32(flags);
-
-	if (buf)
-		memcpy(bcdc->buf, buf, len);
-
-	ret = brcmf_proto_bcdc_msg(drvr);
+	ret = brcmf_proto_bcdc_msg(drvr, ifidx, cmd, buf, len, true);
 	if (ret < 0)
 		goto done;
 
@@ -369,7 +351,7 @@ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
 
 	drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
 	drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN +
-			sizeof(struct brcmf_proto_bcdc_dcmd) + ROUND_UP_MARGIN;
+			sizeof(struct brcmf_proto_bcdc_dcmd);
 	return 0;
 
 fail:
-- 
cgit v1.2.3


From 9ecf51c5831b86b367588f2aa50c0b156738b9c6 Mon Sep 17 00:00:00 2001
From: Hante Meuleman
Date: Thu, 12 Dec 2013 11:59:01 +0100
Subject: brcmfmac: Fix hex dump for FWIL.

The debug function brcmf_dbg_hex_dump API got changed and the
information string should preferably contain a \n at the end
of the string. Update the FWIL so debug output looks better.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/fwil.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
index b72d3395499a..22adbe311d20 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
@@ -68,7 +68,7 @@ brcmf_fil_cmd_data_set(struct brcmf_if *ifp, u32 cmd, void *data, u32 len)
 
 	brcmf_dbg(FIL, "cmd=%d, len=%d\n", cmd, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	err = brcmf_fil_cmd_data(ifp, cmd, data, len, true);
 	mutex_unlock(&ifp->drvr->proto_block);
@@ -86,7 +86,7 @@ brcmf_fil_cmd_data_get(struct brcmf_if *ifp, u32 cmd, void *data, u32 len)
 
 	brcmf_dbg(FIL, "cmd=%d, len=%d\n", cmd, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	mutex_unlock(&ifp->drvr->proto_block);
 
@@ -155,7 +155,7 @@ brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data,
 
 	brcmf_dbg(FIL, "name=%s, len=%d\n", name, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	buflen = brcmf_create_iovar(name, data, len, drvr->proto_buf,
 				    sizeof(drvr->proto_buf));
@@ -195,7 +195,7 @@ brcmf_fil_iovar_data_get(struct brcmf_if *ifp, char *name, void *data,
 
 	brcmf_dbg(FIL, "name=%s, len=%d\n", name, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	mutex_unlock(&drvr->proto_block);
 	return err;
@@ -278,7 +278,7 @@ brcmf_fil_bsscfg_data_set(struct brcmf_if *ifp, char *name,
 
 	brcmf_dbg(FIL, "bssidx=%d, name=%s, len=%d\n", ifp->bssidx, name, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len,
 				     drvr->proto_buf, sizeof(drvr->proto_buf));
@@ -317,7 +317,7 @@ brcmf_fil_bsscfg_data_get(struct brcmf_if *ifp, char *name,
 	}
 	brcmf_dbg(FIL, "bssidx=%d, name=%s, len=%d\n", ifp->bssidx, name, len);
 	brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data,
-			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data");
+			   min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n");
 
 	mutex_unlock(&drvr->proto_block);
 	return err;
-- 
cgit v1.2.3


From 943258b6a3b1fe4b54dd579b9e2e5bec1d9af407 Mon Sep 17 00:00:00 2001
From: Hante Meuleman
Date: Thu, 12 Dec 2013 11:59:02 +0100
Subject: brcmfmac: Add definition of new protocol layer msgbuf.

A new protocol layer msgbuf will be added in the future. This
change makes it possible to select the desired layer by the
bus driver. USB and SDIO will select BCDC. At the moment
nothing is being done with this information.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c  | 1 +
 drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 8 ++++++++
 drivers/net/wireless/brcm80211/brcmfmac/usb.c     | 1 +
 3 files changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index cf21631440cc..1b333a28a6aa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1036,6 +1036,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 
 	sdiodev->bus_if = bus_if;
 	bus_if->bus_priv.sdio = sdiodev;
+	bus_if->proto_type = BRCMF_PROTO_BCDC;
 	dev_set_drvdata(&func->dev, bus_if);
 	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
 	sdiodev->dev = &sdiodev->func[1]->dev;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index 6a54905528be..5c12a07673fa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -24,6 +24,12 @@ enum brcmf_bus_state {
 	BRCMF_BUS_DATA		/* Ready for frame transfers */
 };
 
+/* The level of bus communication with the dongle */
+enum brcmf_bus_protocol_type {
+	BRCMF_PROTO_BCDC,
+	BRCMF_PROTO_MSGBUF
+};
+
 struct brcmf_bus_dcmd {
 	char *name;
 	char *param;
@@ -65,6 +71,7 @@ struct brcmf_bus_ops {
  * struct brcmf_bus - interface structure between common and bus layer
  *
  * @bus_priv: pointer to private bus device.
+ * @proto_type: protocol type, bcdc or msgbuf
  * @dev: device pointer of bus device.
  * @drvr: public driver information.
  * @state: operational state of the bus interface.
@@ -80,6 +87,7 @@ struct brcmf_bus {
 		struct brcmf_sdio_dev *sdio;
 		struct brcmf_usbdev *usb;
 	} bus_priv;
+	enum brcmf_bus_protocol_type proto_type;
 	struct device *dev;
 	struct brcmf_pub *drvr;
 	enum brcmf_bus_state state;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 51c4de054b15..c345c32eb631 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1253,6 +1253,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	bus->ops = &brcmf_usb_bus_ops;
 	bus->chip = bus_pub->devid;
 	bus->chiprev = bus_pub->chiprev;
+	bus->proto_type = BRCMF_PROTO_BCDC;
 
 	/* Attach to the common driver interface */
 	ret = brcmf_attach(dev);
-- 
cgit v1.2.3


From 7b8a466e7cd36fc2acdba5c22a594e75d9b9f61a Mon Sep 17 00:00:00 2001
From: Hante Meuleman
Date: Thu, 12 Dec 2013 11:59:03 +0100
Subject: brcmfmac: Combine protocol push hdr and bus txdata.

For the transmission of data a protocol push hdr is performed
followed by a bus txdata call. For the new protocol msgbuf this
is not workable. Since they are already "loosely" coupled for
bcdc protocol they are combined. This means that txdata will
go "through" the protocol layer and a seperate protocol push
hdr will not be needed anymore.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcdc.c     | 11 ++++++-
 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 37 ++++++++++------------
 drivers/net/wireless/brcm80211/brcmfmac/proto.c    |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/proto.h    | 14 ++++----
 4 files changed, 35 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
index ee861427117e..12c27d13df7f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c
@@ -329,6 +329,15 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
 	return 0;
 }
 
+static int
+brcmf_proto_bcdc_txdata(struct brcmf_pub *drvr, int ifidx, u8 offset,
+			struct sk_buff *pktbuf)
+{
+	brcmf_proto_bcdc_hdrpush(drvr, ifidx, offset, pktbuf);
+	return brcmf_bus_txdata(drvr->bus_if, pktbuf);
+}
+
+
 int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
 {
 	struct brcmf_bcdc *bcdc;
@@ -343,10 +352,10 @@ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
 		goto fail;
 	}
 
-	drvr->proto->hdrpush = brcmf_proto_bcdc_hdrpush;
 	drvr->proto->hdrpull = brcmf_proto_bcdc_hdrpull;
 	drvr->proto->query_dcmd = brcmf_proto_bcdc_query_dcmd;
 	drvr->proto->set_dcmd = brcmf_proto_bcdc_set_dcmd;
+	drvr->proto->txdata = brcmf_proto_bcdc_txdata;
 	drvr->proto->pd = bcdc;
 
 	drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index a5937840f0a7..7918c1033662 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -838,7 +838,7 @@ static void brcmf_fws_cleanup(struct brcmf_fws_info *fws, int ifidx)
 	brcmf_fws_hanger_cleanup(fws, matchfn, ifidx);
 }
 
-static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
+static u8 brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
 {
 	struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac;
 	u8 *wlh;
@@ -887,9 +887,7 @@ static int brcmf_fws_hdrpush(struct brcmf_fws_info *fws, struct sk_buff *skb)
 	if (fillers)
 		memset(wlh, BRCMF_FWS_TYPE_FILLER, fillers);
 
-	brcmf_proto_hdrpush(fws->drvr, brcmf_skb_if_flags_get_field(skb, INDEX),
-			    data_offset >> 2, skb);
-	return 0;
+	return (u8)(data_offset >> 2);
 }
 
 static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
@@ -897,10 +895,11 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
 				 int fifo, bool send_immediately)
 {
 	struct sk_buff *skb;
-	struct brcmf_bus *bus;
 	struct brcmf_skbuff_cb *skcb;
 	s32 err;
 	u32 len;
+	u8 data_offset;
+	int ifidx;
 
 	/* check delayedQ and suppressQ in one call using bitmap */
 	if (brcmu_pktq_mlen(&entry->psq, 3 << (fifo * 2)) == 0)
@@ -928,13 +927,11 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws,
 		skcb->state = BRCMF_FWS_SKBSTATE_TIM;
 		skcb->htod = 0;
 		skcb->htod_seq = 0;
-		bus = fws->drvr->bus_if;
-		err = brcmf_fws_hdrpush(fws, skb);
-		if (err == 0) {
-			brcmf_fws_unlock(fws);
-			err = brcmf_bus_txdata(bus, skb);
-			brcmf_fws_lock(fws);
-		}
+		data_offset = brcmf_fws_hdrpush(fws, skb);
+		ifidx = brcmf_skb_if_flags_get_field(skb, INDEX);
+		brcmf_fws_unlock(fws);
+		err = brcmf_proto_txdata(fws->drvr, ifidx, data_offset, skb);
+		brcmf_fws_lock(fws);
 		if (err)
 			brcmu_pkt_buf_free_skb(skb);
 		return true;
@@ -1719,7 +1716,7 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 	return 0;
 }
 
-static void brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
+static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 				   struct sk_buff *p)
 {
 	struct brcmf_skbuff_cb *skcb = brcmf_skbcb(p);
@@ -1737,7 +1734,7 @@ static void brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo,
 		flags |= BRCMF_FWS_HTOD_FLAG_PKT_REQUESTED;
 	}
 	brcmf_skb_htod_tag_set_field(p, FLAGS, flags);
-	brcmf_fws_hdrpush(fws, p);
+	return brcmf_fws_hdrpush(fws, p);
 }
 
 static void brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
@@ -1805,20 +1802,21 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo,
 {
 	struct brcmf_skbuff_cb *skcb = brcmf_skbcb(skb);
 	struct brcmf_fws_mac_descriptor *entry;
-	struct brcmf_bus *bus = fws->drvr->bus_if;
 	int rc;
 	u8 ifidx;
+	u8 data_offset;
 
 	entry = skcb->mac;
 	if (IS_ERR(entry))
 		return PTR_ERR(entry);
 
-	brcmf_fws_precommit_skb(fws, fifo, skb);
+	data_offset = brcmf_fws_precommit_skb(fws, fifo, skb);
 	entry->transit_count++;
 	if (entry->suppressed)
 		entry->suppr_transit_count++;
+	ifidx = brcmf_skb_if_flags_get_field(skb, INDEX);
 	brcmf_fws_unlock(fws);
-	rc = brcmf_bus_txdata(bus, skb);
+	rc = brcmf_proto_txdata(fws->drvr, ifidx, data_offset, skb);
 	brcmf_fws_lock(fws);
 	brcmf_dbg(DATA, "%s flags %X htod %X bus_tx %d\n", entry->name,
 		  skcb->if_flags, skcb->htod, rc);
@@ -1979,10 +1977,9 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 							&skb, true);
 				ifidx = brcmf_skb_if_flags_get_field(skb,
 								     INDEX);
-				brcmf_proto_hdrpush(drvr, ifidx, 0, skb);
-				/* Use bus module to send data frame */
+				/* Use proto layer to send data frame */
 				brcmf_fws_unlock(fws);
-				ret = brcmf_bus_txdata(drvr->bus_if, skb);
+				ret = brcmf_proto_txdata(drvr, ifidx, 0, skb);
 				brcmf_fws_lock(fws);
 				if (ret < 0)
 					brcmf_txfinalize(drvr, skb, false);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/proto.c b/drivers/net/wireless/brcm80211/brcmfmac/proto.c
index 87eb2bd4c072..b6b464184946 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/proto.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.c
@@ -39,7 +39,7 @@ int brcmf_proto_attach(struct brcmf_pub *drvr)
 	if (brcmf_proto_bcdc_attach(drvr))
 		goto fail;
 
-	if ((proto->hdrpush == NULL) || (proto->hdrpull == NULL) ||
+	if ((proto->txdata == NULL) || (proto->hdrpull == NULL) ||
 	    (proto->query_dcmd == NULL) || (proto->set_dcmd == NULL)) {
 		brcmf_err("Not all proto handlers have been installed\n");
 		goto fail;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/proto.h b/drivers/net/wireless/brcm80211/brcmfmac/proto.h
index 8de1b3bce228..482fb0ba4a30 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/proto.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h
@@ -17,14 +17,14 @@
 #define BRCMFMAC_PROTO_H
 
 struct brcmf_proto {
-	void (*hdrpush)(struct brcmf_pub *drvr, int ifidx, u8 offset,
-			struct sk_buff *skb);
 	int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
 		       struct sk_buff *skb);
 	int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd,
 			  void *buf, uint len);
 	int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
 			uint len);
+	int (*txdata)(struct brcmf_pub *drvr, int ifidx, u8 offset,
+		      struct sk_buff *skb);
 	void *pd;
 };
 
@@ -32,11 +32,6 @@ struct brcmf_proto {
 int brcmf_proto_attach(struct brcmf_pub *drvr);
 void brcmf_proto_detach(struct brcmf_pub *drvr);
 
-static inline void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx,
-				       u8 offset, struct sk_buff *skb)
-{
-	drvr->proto->hdrpush(drvr, ifidx, offset, skb);
-}
 static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
 				      u8 *ifidx, struct sk_buff *skb)
 {
@@ -52,6 +47,11 @@ static inline int brcmf_proto_set_dcmd(struct brcmf_pub *drvr, int ifidx,
 {
 	return drvr->proto->set_dcmd(drvr, ifidx, cmd, buf, len);
 }
+static inline int brcmf_proto_txdata(struct brcmf_pub *drvr, int ifidx,
+				       u8 offset, struct sk_buff *skb)
+{
+	return drvr->proto->txdata(drvr, ifidx, offset, skb);
+}
 
 
 #endif /* BRCMFMAC_PROTO_H */
-- 
cgit v1.2.3


From 82d7f3c10cf41c681e4577bcbc070454e5774960 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:59:04 +0100
Subject: brcmfmac: use consistent function names in dhd_sdio.c

Functions in dhd_sdio.c that are called with struct brcmf_sdio
instance are renamed consistently with brcmf_sdio_ prefix.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   |  12 +-
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 346 ++++++++++-----------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |   9 +-
 3 files changed, 178 insertions(+), 189 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 1b333a28a6aa..a4dae21ef9a3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -72,7 +72,7 @@ static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
 		sdiodev->irq_en = false;
 	}
 
-	brcmf_sdbrcm_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus);
 
 	return IRQ_HANDLED;
 }
@@ -84,7 +84,7 @@ static void brcmf_sdiod_ib_irqhandler(struct sdio_func *func)
 
 	brcmf_dbg(INTR, "IB intr triggered\n");
 
-	brcmf_sdbrcm_isr(sdiodev->bus);
+	brcmf_sdio_isr(sdiodev->bus);
 }
 
 /* dummy handler for SDIO function 2 interrupt */
@@ -901,7 +901,7 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 
 	if (sdiodev->bus) {
-		brcmf_sdbrcm_disconnect(sdiodev->bus);
+		brcmf_sdio_disconnect(sdiodev->bus);
 		sdiodev->bus = NULL;
 	}
 
@@ -971,7 +971,7 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->max_segment_size = host->max_seg_size;
 
 	/* try to attach to the target device */
-	sdiodev->bus = brcmf_sdbrcm_probe(sdiodev);
+	sdiodev->bus = brcmf_sdio_probe(sdiodev);
 	if (!sdiodev->bus) {
 		ret = -ENODEV;
 		goto out;
@@ -1117,7 +1117,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 		return ret;
 	}
 
-	brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
+	brcmf_sdio_wd_timer(sdiodev->bus, 0);
 
 	return ret;
 }
@@ -1127,7 +1127,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 
-	brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
+	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
 	atomic_set(&sdiodev->suspend, false);
 	return 0;
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 7fff4cc3166f..f3069b47fcf4 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -556,7 +556,7 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
 };
 
 
-static const struct firmware *brcmf_sdbrcm_get_fw(struct brcmf_sdio *bus,
+static const struct firmware *brcmf_sdio_get_fw(struct brcmf_sdio *bus,
 						  enum brcmf_firmware_type type)
 {
 	const struct firmware *fw;
@@ -641,7 +641,7 @@ w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 }
 
 static int
-brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
+brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 {
 	u8 wr_val = 0, rd_val, cmp_val, bmask;
 	int err = 0;
@@ -701,7 +701,7 @@ brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on)
 #define HOSTINTMASK		(I_HMB_SW_MASK | I_CHIPACTIVE)
 
 /* Turn backplane clock on or off */
-static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
+static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 {
 	int err;
 	u8 clkctl, clkreq, devctl;
@@ -823,7 +823,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 }
 
 /* Change idle/active SD state */
-static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
+static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on)
 {
 	brcmf_dbg(SDIO, "Enter\n");
 
@@ -836,7 +836,7 @@ static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
 }
 
 /* Transition SD and backplane clock readiness */
-static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
+static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 {
 #ifdef DEBUG
 	uint oldstate = bus->clkstate;
@@ -847,7 +847,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 	/* Early exit if we're already there */
 	if (bus->clkstate == target) {
 		if (target == CLK_AVAIL) {
-			brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
+			brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
 			bus->activity = true;
 		}
 		return 0;
@@ -857,32 +857,32 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 	case CLK_AVAIL:
 		/* Make sure SD clock is available */
 		if (bus->clkstate == CLK_NONE)
-			brcmf_sdbrcm_sdclk(bus, true);
+			brcmf_sdio_sdclk(bus, true);
 		/* Now request HT Avail on the backplane */
-		brcmf_sdbrcm_htclk(bus, true, pendok);
-		brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
+		brcmf_sdio_htclk(bus, true, pendok);
+		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
 		bus->activity = true;
 		break;
 
 	case CLK_SDONLY:
 		/* Remove HT request, or bring up SD clock */
 		if (bus->clkstate == CLK_NONE)
-			brcmf_sdbrcm_sdclk(bus, true);
+			brcmf_sdio_sdclk(bus, true);
 		else if (bus->clkstate == CLK_AVAIL)
-			brcmf_sdbrcm_htclk(bus, false, false);
+			brcmf_sdio_htclk(bus, false, false);
 		else
 			brcmf_err("request for %d -> %d\n",
 				  bus->clkstate, target);
-		brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
+		brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
 		break;
 
 	case CLK_NONE:
 		/* Make sure to remove HT request */
 		if (bus->clkstate == CLK_AVAIL)
-			brcmf_sdbrcm_htclk(bus, false, false);
+			brcmf_sdio_htclk(bus, false, false);
 		/* Now remove the SD clock */
-		brcmf_sdbrcm_sdclk(bus, false);
-		brcmf_sdbrcm_wd_timer(bus, 0);
+		brcmf_sdio_sdclk(bus, false);
+		brcmf_sdio_wd_timer(bus, 0);
 		break;
 	}
 #ifdef DEBUG
@@ -893,7 +893,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 }
 
 static int
-brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
+brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 {
 	int err = 0;
 	brcmf_dbg(TRACE, "Enter\n");
@@ -916,13 +916,13 @@ brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 			    brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
 			    data_ok(bus)))
 				 return -EBUSY;
-			err = brcmf_sdbrcm_kso_control(bus, false);
+			err = brcmf_sdio_kso_control(bus, false);
 			/* disable watchdog */
 			if (!err)
-				brcmf_sdbrcm_wd_timer(bus, 0);
+				brcmf_sdio_wd_timer(bus, 0);
 		} else {
 			bus->idlecount = 0;
-			err = brcmf_sdbrcm_kso_control(bus, true);
+			err = brcmf_sdio_kso_control(bus, true);
 		}
 		if (!err) {
 			/* Change state */
@@ -940,16 +940,16 @@ end:
 	/* control clocks */
 	if (sleep) {
 		if (!bus->sr_enabled)
-			brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok);
+			brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
 	} else {
-		brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok);
+		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
 	}
 
 	return err;
 
 }
 
-static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
+static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
 {
 	u32 intstatus = 0;
 	u32 hmb_data;
@@ -1025,7 +1025,7 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
 	return intstatus;
 }
 
-static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
+static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 {
 	uint retries = 0;
 	u16 lastrbc;
@@ -1085,7 +1085,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 }
 
 /* return total length of buffer chain */
-static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus)
+static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus)
 {
 	struct sk_buff *p;
 	uint total;
@@ -1096,7 +1096,7 @@ static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus)
 	return total;
 }
 
-static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)
+static void brcmf_sdio_free_glom(struct brcmf_sdio *bus)
 {
 	struct sk_buff *cur, *next;
 
@@ -1184,7 +1184,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
 	if ((u16)(~(len ^ checksum))) {
 		brcmf_err("HW header checksum error\n");
 		bus->sdcnt.rx_badhdr++;
-		brcmf_sdbrcm_rxfail(bus, false, false);
+		brcmf_sdio_rxfail(bus, false, false);
 		return -EIO;
 	}
 	if (len < SDPCM_HDRLEN) {
@@ -1216,7 +1216,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
 	    type != BRCMF_SDIO_FT_SUPER) {
 		brcmf_err("HW header length too long\n");
 		bus->sdcnt.rx_toolong++;
-		brcmf_sdbrcm_rxfail(bus, false, false);
+		brcmf_sdio_rxfail(bus, false, false);
 		rd->len = 0;
 		return -EPROTO;
 	}
@@ -1235,7 +1235,7 @@ static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
 	if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
 		brcmf_err("seq %d: bad data offset\n", rx_seq);
 		bus->sdcnt.rx_badhdr++;
-		brcmf_sdbrcm_rxfail(bus, false, false);
+		brcmf_sdio_rxfail(bus, false, false);
 		rd->len = 0;
 		return -ENXIO;
 	}
@@ -1308,7 +1308,7 @@ static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,
 	trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header);
 }
 
-static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
+static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 {
 	u16 dlen, totlen;
 	u8 *dptr, num = 0;
@@ -1388,7 +1388,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 			}
 			pfirst = pnext = NULL;
 		} else {
-			brcmf_sdbrcm_free_glom(bus);
+			brcmf_sdio_free_glom(bus);
 			num = 0;
 		}
 
@@ -1411,7 +1411,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 		}
 
 		pfirst = skb_peek(&bus->glom);
-		dlen = (u16) brcmf_sdbrcm_glom_len(bus);
+		dlen = (u16) brcmf_sdio_glom_len(bus);
 
 		/* Do an SDIO read for the superframe.  Configurable iovar to
 		 * read directly into the chained packet, or allocate a large
@@ -1430,12 +1430,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 
 			sdio_claim_host(bus->sdiodev->func[1]);
 			if (bus->glomerr++ < 3) {
-				brcmf_sdbrcm_rxfail(bus, true, true);
+				brcmf_sdio_rxfail(bus, true, true);
 			} else {
 				bus->glomerr = 0;
-				brcmf_sdbrcm_rxfail(bus, true, false);
+				brcmf_sdio_rxfail(bus, true, false);
 				bus->sdcnt.rxglomfail++;
-				brcmf_sdbrcm_free_glom(bus);
+				brcmf_sdio_free_glom(bus);
 			}
 			sdio_release_host(bus->sdiodev->func[1]);
 			return 0;
@@ -1483,12 +1483,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 			if (bus->glomerr++ < 3) {
 				/* Restore superframe header space */
 				skb_push(pfirst, sfdoff);
-				brcmf_sdbrcm_rxfail(bus, true, true);
+				brcmf_sdio_rxfail(bus, true, true);
 			} else {
 				bus->glomerr = 0;
-				brcmf_sdbrcm_rxfail(bus, true, false);
+				brcmf_sdio_rxfail(bus, true, false);
 				bus->sdcnt.rxglomfail++;
-				brcmf_sdbrcm_free_glom(bus);
+				brcmf_sdio_free_glom(bus);
 			}
 			sdio_release_host(bus->sdiodev->func[1]);
 			bus->cur_read.len = 0;
@@ -1532,8 +1532,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
 	return num;
 }
 
-static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
-					bool *pending)
+static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
+				     bool *pending)
 {
 	DECLARE_WAITQUEUE(wait, current);
 	int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
@@ -1554,7 +1554,7 @@ static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
 	return timeout;
 }
 
-static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus)
+static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus)
 {
 	if (waitqueue_active(&bus->dcmd_resp_wait))
 		wake_up_interruptible(&bus->dcmd_resp_wait);
@@ -1562,7 +1562,7 @@ static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus)
 	return 0;
 }
 static void
-brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
+brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 {
 	uint rdlen, pad;
 	u8 *buf = NULL, *rbuf;
@@ -1600,7 +1600,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 	if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
 		brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
 			  rdlen, bus->sdiodev->bus_if->maxctl);
-		brcmf_sdbrcm_rxfail(bus, false, false);
+		brcmf_sdio_rxfail(bus, false, false);
 		goto done;
 	}
 
@@ -1608,7 +1608,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 		brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
 			  len, len - doff, bus->sdiodev->bus_if->maxctl);
 		bus->sdcnt.rx_toolong++;
-		brcmf_sdbrcm_rxfail(bus, false, false);
+		brcmf_sdio_rxfail(bus, false, false);
 		goto done;
 	}
 
@@ -1621,7 +1621,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
 		brcmf_err("read %d control bytes failed: %d\n",
 			  rdlen, sdret);
 		bus->sdcnt.rxc_errors++;
-		brcmf_sdbrcm_rxfail(bus, true, true);
+		brcmf_sdio_rxfail(bus, true, true);
 		goto done;
 	} else
 		memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen);
@@ -1646,11 +1646,11 @@ gotpkt:
 
 done:
 	/* Awake any waiters */
-	brcmf_sdbrcm_dcmd_resp_wake(bus);
+	brcmf_sdio_dcmd_resp_wake(bus);
 }
 
 /* Pad read to blocksize for efficiency */
-static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
+static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
 {
 	if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
 		*pad = bus->blocksize - (*rdlen % bus->blocksize);
@@ -1687,7 +1687,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 			u8 cnt;
 			brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
 				  bus->glomd, skb_peek(&bus->glom));
-			cnt = brcmf_sdbrcm_rxglom(bus, rd->seq_num);
+			cnt = brcmf_sdio_rxglom(bus, rd->seq_num);
 			brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
 			rd->seq_num += cnt - 1;
 			rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
@@ -1705,7 +1705,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 				brcmf_err("RXHEADER FAILED: %d\n",
 					  ret);
 				bus->sdcnt.rx_hdrfail++;
-				brcmf_sdbrcm_rxfail(bus, true, true);
+				brcmf_sdio_rxfail(bus, true, true);
 				sdio_release_host(bus->sdiodev->func[1]);
 				continue;
 			}
@@ -1724,9 +1724,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 			}
 
 			if (rd->channel == SDPCM_CONTROL_CHANNEL) {
-				brcmf_sdbrcm_read_control(bus, bus->rxhdr,
-							  rd->len,
-							  rd->dat_offset);
+				brcmf_sdio_read_control(bus, bus->rxhdr,
+							rd->len,
+							rd->dat_offset);
 				/* prepare the descriptor for the next read */
 				rd->len = rd->len_nxtfrm << 4;
 				rd->len_nxtfrm = 0;
@@ -1740,14 +1740,14 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 			head_read = BRCMF_FIRSTREAD;
 		}
 
-		brcmf_pad(bus, &pad, &rd->len_left);
+		brcmf_sdio_pad(bus, &pad, &rd->len_left);
 
 		pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
 					    bus->head_align);
 		if (!pkt) {
 			/* Give up on data, request rtx of events */
 			brcmf_err("brcmu_pkt_buf_get_skb failed\n");
-			brcmf_sdbrcm_rxfail(bus, false,
+			brcmf_sdio_rxfail(bus, false,
 					    RETRYCHAN(rd->channel));
 			sdio_release_host(bus->sdiodev->func[1]);
 			continue;
@@ -1764,7 +1764,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 				  rd->len, rd->channel, ret);
 			brcmu_pkt_buf_free_skb(pkt);
 			sdio_claim_host(bus->sdiodev->func[1]);
-			brcmf_sdbrcm_rxfail(bus, true,
+			brcmf_sdio_rxfail(bus, true,
 					    RETRYCHAN(rd->channel));
 			sdio_release_host(bus->sdiodev->func[1]);
 			continue;
@@ -1789,7 +1789,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 					  rd->len,
 					  roundup(rd_new.len, 16) >> 4);
 				rd->len = 0;
-				brcmf_sdbrcm_rxfail(bus, true, true);
+				brcmf_sdio_rxfail(bus, true, true);
 				sdio_release_host(bus->sdiodev->func[1]);
 				brcmu_pkt_buf_free_skb(pkt);
 				continue;
@@ -1811,7 +1811,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 				/* Force retry w/normal header read */
 				rd->len = 0;
 				sdio_claim_host(bus->sdiodev->func[1]);
-				brcmf_sdbrcm_rxfail(bus, false, true);
+				brcmf_sdio_rxfail(bus, false, true);
 				sdio_release_host(bus->sdiodev->func[1]);
 				brcmu_pkt_buf_free_skb(pkt);
 				continue;
@@ -1836,7 +1836,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 				brcmf_err("%s: glom superframe w/o "
 					  "descriptor!\n", __func__);
 				sdio_claim_host(bus->sdiodev->func[1]);
-				brcmf_sdbrcm_rxfail(bus, false, false);
+				brcmf_sdio_rxfail(bus, false, false);
 				sdio_release_host(bus->sdiodev->func[1]);
 			}
 			/* prepare the descriptor for the next read */
@@ -1880,7 +1880,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 }
 
 static void
-brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)
+brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus)
 {
 	if (waitqueue_active(&bus->ctrl_wait))
 		wake_up_interruptible(&bus->ctrl_wait);
@@ -2096,8 +2096,8 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
 
 /* Writes a HW/SW header into the packet and sends it. */
 /* Assumes: (a) header space already there, (b) caller holds lock */
-static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
-			      uint chan)
+static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
+			    uint chan)
 {
 	int ret;
 	int i;
@@ -2148,7 +2148,7 @@ done:
 	return ret;
 }
 
-static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
+static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 {
 	struct sk_buff *pkt;
 	struct sk_buff_head pktq;
@@ -2182,7 +2182,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 		if (i == 0)
 			break;
 
-		ret = brcmf_sdbrcm_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
+		ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
 		cnt += i;
 
 		/* In poll mode, need to check for other events */
@@ -2211,7 +2211,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	return cnt;
 }
 
-static void brcmf_sdbrcm_bus_stop(struct device *dev)
+static void brcmf_sdio_bus_stop(struct device *dev)
 {
 	u32 local_hostintmask;
 	u8 saveclk;
@@ -2231,7 +2231,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* Enable clock for device interrupts */
-	brcmf_sdbrcm_bus_sleep(bus, false, false);
+	brcmf_sdio_bus_sleep(bus, false, false);
 
 	/* Disable and clear interrupts at the chip level also */
 	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
@@ -2260,7 +2260,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 		  offsetof(struct sdpcmd_regs, intstatus));
 
 	/* Turn off the backplane clock (only) */
-	brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
+	brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
 	sdio_release_host(bus->sdiodev->func[1]);
 
 	/* Clear the data packet queues */
@@ -2269,20 +2269,20 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	/* Clear any held glomming stuff */
 	if (bus->glomd)
 		brcmu_pkt_buf_free_skb(bus->glomd);
-	brcmf_sdbrcm_free_glom(bus);
+	brcmf_sdio_free_glom(bus);
 
 	/* Clear rx control and wake any waiters */
 	spin_lock_bh(&bus->rxctl_lock);
 	bus->rxlen = 0;
 	spin_unlock_bh(&bus->rxctl_lock);
-	brcmf_sdbrcm_dcmd_resp_wake(bus);
+	brcmf_sdio_dcmd_resp_wake(bus);
 
 	/* Reset some F2 state stuff */
 	bus->rxskip = false;
 	bus->tx_seq = bus->rx_seq = 0;
 }
 
-static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
+static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
 {
 	unsigned long flags;
 
@@ -2331,7 +2331,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	return ret;
 }
 
-static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
+static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
 	u32 newstatus = 0;
 	unsigned long intstatus;
@@ -2391,7 +2391,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	}
 
 	/* Make sure backplane clock is on */
-	brcmf_sdbrcm_bus_sleep(bus, false, true);
+	brcmf_sdio_bus_sleep(bus, false, true);
 
 	/* Pending interrupt indicates new device status */
 	if (atomic_read(&bus->ipend) > 0) {
@@ -2422,7 +2422,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	/* Handle host mailbox indication */
 	if (intstatus & I_HMB_HOST_INT) {
 		intstatus &= ~I_HMB_HOST_INT;
-		intstatus |= brcmf_sdbrcm_hostmail(bus);
+		intstatus |= brcmf_sdio_hostmail(bus);
 	}
 
 	sdio_release_host(bus->sdiodev->func[1]);
@@ -2467,7 +2467,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 			set_bit(n, (unsigned long *)&bus->intstatus.counter);
 	}
 
-	brcmf_sdbrcm_clrintr(bus);
+	brcmf_sdio_clrintr(bus);
 
 	if (data_ok(bus) && bus->ctrl_frame_stat &&
 		(bus->clkstate == CLK_AVAIL)) {
@@ -2508,7 +2508,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		}
 		sdio_release_host(bus->sdiodev->func[1]);
 		bus->ctrl_frame_stat = false;
-		brcmf_sdbrcm_wait_event_wakeup(bus);
+		brcmf_sdio_wait_event_wakeup(bus);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
 	else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
@@ -2516,7 +2516,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		 && data_ok(bus)) {
 		framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
 					    txlimit;
-		framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
+		framecnt = brcmf_sdio_sendfromq(bus, framecnt);
 		txlimit -= framecnt;
 	}
 
@@ -2538,12 +2538,12 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 		bus->activity = false;
 		brcmf_dbg(SDIO, "idle state\n");
 		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_sdbrcm_bus_sleep(bus, true, false);
+		brcmf_sdio_bus_sleep(bus, true, false);
 		sdio_release_host(bus->sdiodev->func[1]);
 	}
 }
 
-static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev)
+static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -2552,7 +2552,7 @@ static struct pktq *brcmf_sdbrcm_bus_gettxq(struct device *dev)
 	return &bus->txq;
 }
 
-static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
+static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
 {
 	int ret = -EBADE;
 	uint datalen, prec;
@@ -2608,7 +2608,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
 #ifdef DEBUG
 #define CONSOLE_LINE_MAX	192
 
-static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
+static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
 {
 	struct brcmf_console *c = &bus->console;
 	u8 line[CONSOLE_LINE_MAX], ch;
@@ -2685,7 +2685,7 @@ break2:
 }
 #endif				/* DEBUG */
 
-static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
+static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 {
 	int i;
 	int ret;
@@ -2724,7 +2724,7 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 }
 
 static int
-brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
+brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 {
 	u8 *frame;
 	u16 len, pad;
@@ -2768,7 +2768,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 
 	/* Make sure backplane clock is on */
 	sdio_claim_host(bus->sdiodev->func[1]);
-	brcmf_sdbrcm_bus_sleep(bus, false, false);
+	brcmf_sdio_bus_sleep(bus, false, false);
 	sdio_release_host(bus->sdiodev->func[1]);
 
 	hd_info.len = (u16)msglen;
@@ -2812,7 +2812,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 
 		do {
 			sdio_claim_host(bus->sdiodev->func[1]);
-			ret = brcmf_tx_frame(bus, frame, len);
+			ret = brcmf_sdio_tx_frame(bus, frame, len);
 			sdio_release_host(bus->sdiodev->func[1]);
 		} while (ret < 0 && retries++ < TXRETRIES);
 	}
@@ -2822,7 +2822,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 		bus->activity = false;
 		sdio_claim_host(bus->sdiodev->func[1]);
 		brcmf_dbg(INFO, "idle\n");
-		brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
+		brcmf_sdio_clkctl(bus, CLK_NONE, true);
 		sdio_release_host(bus->sdiodev->func[1]);
 	}
 
@@ -2856,7 +2856,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 	 * address of sdpcm_shared structure
 	 */
 	sdio_claim_host(bus->sdiodev->func[1]);
-	brcmf_sdbrcm_bus_sleep(bus, false, false);
+	brcmf_sdio_bus_sleep(bus, false, false);
 	rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
 	sdio_release_host(bus->sdiodev->func[1]);
 	if (rv < 0)
@@ -3044,7 +3044,7 @@ static int brcmf_sdio_assert_info(struct brcmf_sdio *bus,
 	return simple_read_from_buffer(data, count, &pos, buf, res);
 }
 
-static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
+static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
 {
 	int error;
 	struct sdpcm_shared sh;
@@ -3065,8 +3065,8 @@ static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
 	return 0;
 }
 
-static int brcmf_sdbrcm_died_dump(struct brcmf_sdio *bus, char __user *data,
-				  size_t count, loff_t *ppos)
+static int brcmf_sdio_died_dump(struct brcmf_sdio *bus, char __user *data,
+				size_t count, loff_t *ppos)
 {
 	int error = 0;
 	struct sdpcm_shared sh;
@@ -3107,7 +3107,7 @@ static ssize_t brcmf_sdio_forensic_read(struct file *f, char __user *data,
 	struct brcmf_sdio *bus = f->private_data;
 	int res;
 
-	res = brcmf_sdbrcm_died_dump(bus, data, count, ppos);
+	res = brcmf_sdio_died_dump(bus, data, count, ppos);
 	if (res > 0)
 		*ppos += res;
 	return (ssize_t)res;
@@ -3132,7 +3132,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
 	brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
 }
 #else
-static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
+static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
 {
 	return 0;
 }
@@ -3143,7 +3143,7 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
 #endif /* DEBUG */
 
 static int
-brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
+brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 {
 	int timeleft;
 	uint rxlen = 0;
@@ -3156,7 +3156,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	/* Wait until control frame is available */
-	timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending);
+	timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
 
 	spin_lock_bh(&bus->rxctl_lock);
 	rxlen = bus->rxlen;
@@ -3173,13 +3173,13 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 			  rxlen, msglen);
 	} else if (timeleft == 0) {
 		brcmf_err("resumed on timeout\n");
-		brcmf_sdbrcm_checkdied(bus);
+		brcmf_sdio_checkdied(bus);
 	} else if (pending) {
 		brcmf_dbg(CTL, "cancelled\n");
 		return -ERESTARTSYS;
 	} else {
 		brcmf_dbg(CTL, "resumed for unknown reason?\n");
-		brcmf_sdbrcm_checkdied(bus);
+		brcmf_sdio_checkdied(bus);
 	}
 
 	if (rxlen)
@@ -3190,7 +3190,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 	return rxlen ? (int)rxlen : -ETIMEDOUT;
 }
 
-static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
+static bool brcmf_sdio_download_state(struct brcmf_sdio *bus, bool enter)
 {
 	struct chip_info *ci = bus->ci;
 
@@ -3215,7 +3215,7 @@ static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
 	return true;
 }
 
-static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
+static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus)
 {
 	const struct firmware *fw;
 	int err;
@@ -3223,7 +3223,7 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
 	int address;
 	int len;
 
-	fw = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_BIN);
+	fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN);
 	if (fw == NULL)
 		return -ENOENT;
 
@@ -3263,8 +3263,8 @@ failure:
  * by two NULs.
 */
 
-static int brcmf_process_nvram_vars(struct brcmf_sdio *bus,
-				    const struct firmware *nv)
+static int brcmf_sdio_strip_nvram(struct brcmf_sdio *bus,
+				  const struct firmware *nv)
 {
 	char *varbuf;
 	char *dp;
@@ -3328,44 +3328,48 @@ err:
 	return ret;
 }
 
-static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
+static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus)
 {
 	const struct firmware *nv;
 	int ret;
 
-	nv = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_NVRAM);
+	nv = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_NVRAM);
 	if (nv == NULL)
 		return -ENOENT;
 
-	ret = brcmf_process_nvram_vars(bus, nv);
+	ret = brcmf_sdio_strip_nvram(bus, nv);
 
 	release_firmware(nv);
 
 	return ret;
 }
 
-static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
+static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 {
-	int bcmerror = -1;
+	int bcmerror = -EFAULT;
+
+
+	sdio_claim_host(bus->sdiodev->func[1]);
+	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 
 	/* Keep arm in reset */
-	if (!brcmf_sdbrcm_download_state(bus, true)) {
+	if (!brcmf_sdio_download_state(bus, true)) {
 		brcmf_err("error placing ARM core in reset\n");
 		goto err;
 	}
 
-	if (brcmf_sdbrcm_download_code_file(bus)) {
+	if (brcmf_sdio_download_code_file(bus)) {
 		brcmf_err("dongle image file download failed\n");
 		goto err;
 	}
 
-	if (brcmf_sdbrcm_download_nvram(bus)) {
+	if (brcmf_sdio_download_nvram(bus)) {
 		brcmf_err("dongle nvram file download failed\n");
 		goto err;
 	}
 
 	/* Take arm out of reset */
-	if (!brcmf_sdbrcm_download_state(bus, false)) {
+	if (!brcmf_sdio_download_state(bus, false)) {
 		brcmf_err("error getting out of ARM core reset\n");
 		goto err;
 	}
@@ -3373,10 +3377,12 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
 	bcmerror = 0;
 
 err:
+	brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
+	sdio_release_host(bus->sdiodev->func[1]);
 	return bcmerror;
 }
 
-static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus)
+static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus)
 {
 	u32 addr, reg;
 
@@ -3395,7 +3401,7 @@ static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus)
 	return (bool)reg;
 }
 
-static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus)
+static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 {
 	int err = 0;
 	u8 val;
@@ -3438,7 +3444,7 @@ static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus)
 }
 
 /* enable KSO bit */
-static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
+static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
 {
 	u8 val;
 	int err = 0;
@@ -3470,25 +3476,7 @@ static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus)
 }
 
 
-static bool
-brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
-{
-	bool ret;
-
-	sdio_claim_host(bus->sdiodev->func[1]);
-
-	brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
-
-	ret = _brcmf_sdbrcm_download_firmware(bus) == 0;
-
-	brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
-
-	sdio_release_host(bus->sdiodev->func[1]);
-
-	return ret;
-}
-
-static int brcmf_sdbrcm_bus_preinit(struct device *dev)
+static int brcmf_sdio_bus_preinit(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -3547,7 +3535,7 @@ done:
 	return err;
 }
 
-static int brcmf_sdbrcm_bus_init(struct device *dev)
+static int brcmf_sdio_bus_init(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
@@ -3559,8 +3547,9 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 
 	/* try to download image and nvram to the dongle */
 	if (bus_if->state == BRCMF_BUS_DOWN) {
-		if (!(brcmf_sdbrcm_download_firmware(bus)))
-			return -1;
+		err = brcmf_sdio_download_firmware(bus);
+		if (err)
+			return err;
 	}
 
 	if (!bus->sdiodev->bus_if->drvr)
@@ -3568,12 +3557,12 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 
 	/* Start the watchdog timer */
 	bus->sdcnt.tickcnt = 0;
-	brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
+	brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
 
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* Make sure backplane clock is on, needed to generate F2 interrupt */
-	brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 	if (bus->clkstate != CLK_AVAIL)
 		goto exit;
 
@@ -3611,8 +3600,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		ret = -ENODEV;
 	}
 
-	if (brcmf_sdbrcm_sr_capable(bus)) {
-		brcmf_sdbrcm_sr_init(bus);
+	if (brcmf_sdio_sr_capable(bus)) {
+		brcmf_sdio_sr_init(bus);
 	} else {
 		/* Restore previous clock setting */
 		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
@@ -3627,7 +3616,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 
 	/* If we didn't come up, turn off backplane clock */
 	if (bus_if->state != BRCMF_BUS_DATA)
-		brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
+		brcmf_sdio_clkctl(bus, CLK_NONE, false);
 
 exit:
 	sdio_release_host(bus->sdiodev->func[1]);
@@ -3635,7 +3624,7 @@ exit:
 	return ret;
 }
 
-void brcmf_sdbrcm_isr(struct brcmf_sdio *bus)
+void brcmf_sdio_isr(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3666,7 +3655,7 @@ void brcmf_sdbrcm_isr(struct brcmf_sdio *bus)
 	queue_work(bus->brcmf_wq, &bus->datawork);
 }
 
-static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
+static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 {
 #ifdef DEBUG
 	struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
@@ -3722,8 +3711,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 			bus->console.count -= bus->console_interval;
 			sdio_claim_host(bus->sdiodev->func[1]);
 			/* Make sure backplane clock is on */
-			brcmf_sdbrcm_bus_sleep(bus, false, false);
-			if (brcmf_sdbrcm_readconsole(bus) < 0)
+			brcmf_sdio_bus_sleep(bus, false, false);
+			if (brcmf_sdio_readconsole(bus) < 0)
 				/* stop on error */
 				bus->console_interval = 0;
 			sdio_release_host(bus->sdiodev->func[1]);
@@ -3737,11 +3726,11 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 			bus->idlecount = 0;
 			if (bus->activity) {
 				bus->activity = false;
-				brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
+				brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
 			} else {
 				brcmf_dbg(SDIO, "idle\n");
 				sdio_claim_host(bus->sdiodev->func[1]);
-				brcmf_sdbrcm_bus_sleep(bus, true, false);
+				brcmf_sdio_bus_sleep(bus, true, false);
 				sdio_release_host(bus->sdiodev->func[1]);
 			}
 		}
@@ -3756,12 +3745,12 @@ static void brcmf_sdio_dataworker(struct work_struct *work)
 					      datawork);
 
 	while (atomic_read(&bus->dpc_tskcnt)) {
-		brcmf_sdbrcm_dpc(bus);
+		brcmf_sdio_dpc(bus);
 		atomic_dec(&bus->dpc_tskcnt);
 	}
 }
 
-static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
+static void brcmf_sdio_release_malloc(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3770,7 +3759,7 @@ static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
 	bus->rxlen = 0;
 }
 
-static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
+static bool brcmf_sdio_probe_malloc(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3787,7 +3776,7 @@ static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
 }
 
 static bool
-brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus)
+brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
 	u8 clkctl = 0;
 	int err = 0;
@@ -3824,7 +3813,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 	}
 
-	if (brcmf_sdbrcm_kso_init(bus)) {
+	if (brcmf_sdio_kso_init(bus)) {
 		brcmf_err("error enabling KSO\n");
 		goto fail;
 	}
@@ -3899,7 +3888,7 @@ fail:
 	return false;
 }
 
-static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
+static bool brcmf_sdio_probe_init(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3933,7 +3922,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 }
 
 static int
-brcmf_sdbrcm_watchdog_thread(void *data)
+brcmf_sdio_watchdog_thread(void *data)
 {
 	struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
 
@@ -3943,7 +3932,7 @@ brcmf_sdbrcm_watchdog_thread(void *data)
 		if (kthread_should_stop())
 			break;
 		if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
-			brcmf_sdbrcm_bus_watchdog(bus);
+			brcmf_sdio_bus_watchdog(bus);
 			/* Count the tick for reference */
 			bus->sdcnt.tickcnt++;
 		} else
@@ -3953,7 +3942,7 @@ brcmf_sdbrcm_watchdog_thread(void *data)
 }
 
 static void
-brcmf_sdbrcm_watchdog(unsigned long data)
+brcmf_sdio_watchdog(unsigned long data)
 {
 	struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
 
@@ -3966,14 +3955,14 @@ brcmf_sdbrcm_watchdog(unsigned long data)
 	}
 }
 
-static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
+static void brcmf_sdio_release_dongle(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
 	if (bus->ci) {
 		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
-		brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
+		brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+		brcmf_sdio_clkctl(bus, CLK_NONE, false);
 		sdio_release_host(bus->sdiodev->func[1]);
 		brcmf_sdio_chip_detach(&bus->ci);
 		if (bus->vars && bus->varsz)
@@ -3985,7 +3974,7 @@ static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
 }
 
 /* Detach and free everything */
-static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
+static void brcmf_sdio_release(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -3999,11 +3988,11 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 
 		if (bus->sdiodev->bus_if->drvr) {
 			brcmf_detach(bus->sdiodev->dev);
-			brcmf_sdbrcm_release_dongle(bus);
+			brcmf_sdio_release_dongle(bus);
 		}
 
 		brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
-		brcmf_sdbrcm_release_malloc(bus);
+		brcmf_sdio_release_malloc(bus);
 		kfree(bus->hdrbuf);
 		kfree(bus);
 	}
@@ -4012,16 +4001,16 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 }
 
 static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
-	.stop = brcmf_sdbrcm_bus_stop,
-	.preinit = brcmf_sdbrcm_bus_preinit,
-	.init = brcmf_sdbrcm_bus_init,
-	.txdata = brcmf_sdbrcm_bus_txdata,
-	.txctl = brcmf_sdbrcm_bus_txctl,
-	.rxctl = brcmf_sdbrcm_bus_rxctl,
-	.gettxq = brcmf_sdbrcm_bus_gettxq,
+	.stop = brcmf_sdio_bus_stop,
+	.preinit = brcmf_sdio_bus_preinit,
+	.init = brcmf_sdio_bus_init,
+	.txdata = brcmf_sdio_bus_txdata,
+	.txctl = brcmf_sdio_bus_txctl,
+	.rxctl = brcmf_sdio_bus_rxctl,
+	.gettxq = brcmf_sdio_bus_gettxq,
 };
 
-struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
+struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret;
 	struct brcmf_sdio *bus;
@@ -4061,8 +4050,8 @@ struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	/* attempt to attach to the dongle */
-	if (!(brcmf_sdbrcm_probe_attach(bus))) {
-		brcmf_err("brcmf_sdbrcm_probe_attach failed\n");
+	if (!(brcmf_sdio_probe_attach(bus))) {
+		brcmf_err("brcmf_sdio_probe_attach failed\n");
 		goto fail;
 	}
 
@@ -4074,11 +4063,11 @@ struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 	/* Set up the watchdog timer */
 	init_timer(&bus->timer);
 	bus->timer.data = (unsigned long)bus;
-	bus->timer.function = brcmf_sdbrcm_watchdog;
+	bus->timer.function = brcmf_sdio_watchdog;
 
 	/* Initialize watchdog thread */
 	init_completion(&bus->watchdog_wait);
-	bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread,
+	bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread,
 					bus, "brcmf_watchdog");
 	if (IS_ERR(bus->watchdog_tsk)) {
 		pr_warn("brcmf_watchdog thread failed to start\n");
@@ -4104,13 +4093,13 @@ struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 	}
 
 	/* Allocate buffers */
-	if (!(brcmf_sdbrcm_probe_malloc(bus))) {
-		brcmf_err("brcmf_sdbrcm_probe_malloc failed\n");
+	if (!(brcmf_sdio_probe_malloc(bus))) {
+		brcmf_err("brcmf_sdio_probe_malloc failed\n");
 		goto fail;
 	}
 
-	if (!(brcmf_sdbrcm_probe_init(bus))) {
-		brcmf_err("brcmf_sdbrcm_probe_init failed\n");
+	if (!(brcmf_sdio_probe_init(bus))) {
+		brcmf_err("brcmf_sdio_probe_init failed\n");
 		goto fail;
 	}
 
@@ -4127,21 +4116,20 @@ struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev)
 	return bus;
 
 fail:
-	brcmf_sdbrcm_release(bus);
+	brcmf_sdio_release(bus);
 	return NULL;
 }
 
-void brcmf_sdbrcm_disconnect(struct brcmf_sdio *bus)
+void brcmf_sdio_disconnect(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
-	brcmf_sdbrcm_release(bus);
+	brcmf_sdio_release(bus);
 
 	brcmf_dbg(TRACE, "Disconnected\n");
 }
 
-void
-brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
+void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick)
 {
 	/* Totally stop the timer */
 	if (!wdtick && bus->wd_timer_valid) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 4c70cf229f51..e28498ed3520 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -235,9 +235,10 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 /* Issue an abort to the specified function */
 int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
-struct brcmf_sdio *brcmf_sdbrcm_probe(struct brcmf_sdio_dev *sdiodev);
-void brcmf_sdbrcm_disconnect(struct brcmf_sdio *bus);
-void brcmf_sdbrcm_isr(struct brcmf_sdio *bus);
-void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick);
+struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
+void brcmf_sdio_disconnect(struct brcmf_sdio *bus);
+void brcmf_sdio_isr(struct brcmf_sdio *bus);
+
+void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
 
 #endif				/* _BRCM_SDH_H_ */
-- 
cgit v1.2.3


From 9fbe2a6dc71d85e166eea43842a55af3d62a4d7b Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:59:05 +0100
Subject: brcmfmac: remove brcmf_sdio_disconnect() function

Instead of calling brcmf_sdio_disconnect() expose brcmf_sdio_remove()
and call it directly.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 51 +++++++++-------------
 .../net/wireless/brcm80211/brcmfmac/sdio_host.h    |  2 +-
 3 files changed, 23 insertions(+), 32 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index a4dae21ef9a3..7550f9f1211f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -901,7 +901,7 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 
 	if (sdiodev->bus) {
-		brcmf_sdio_disconnect(sdiodev->bus);
+		brcmf_sdio_remove(sdiodev->bus);
 		sdiodev->bus = NULL;
 	}
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index f3069b47fcf4..f214510e3bee 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3973,33 +3973,6 @@ static void brcmf_sdio_release_dongle(struct brcmf_sdio *bus)
 	brcmf_dbg(TRACE, "Disconnected\n");
 }
 
-/* Detach and free everything */
-static void brcmf_sdio_release(struct brcmf_sdio *bus)
-{
-	brcmf_dbg(TRACE, "Enter\n");
-
-	if (bus) {
-		/* De-register interrupt handler */
-		brcmf_sdiod_intr_unregister(bus->sdiodev);
-
-		cancel_work_sync(&bus->datawork);
-		if (bus->brcmf_wq)
-			destroy_workqueue(bus->brcmf_wq);
-
-		if (bus->sdiodev->bus_if->drvr) {
-			brcmf_detach(bus->sdiodev->dev);
-			brcmf_sdio_release_dongle(bus);
-		}
-
-		brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
-		brcmf_sdio_release_malloc(bus);
-		kfree(bus->hdrbuf);
-		kfree(bus);
-	}
-
-	brcmf_dbg(TRACE, "Disconnected\n");
-}
-
 static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.stop = brcmf_sdio_bus_stop,
 	.preinit = brcmf_sdio_bus_preinit,
@@ -4116,15 +4089,33 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	return bus;
 
 fail:
-	brcmf_sdio_release(bus);
+	brcmf_sdio_remove(bus);
 	return NULL;
 }
 
-void brcmf_sdio_disconnect(struct brcmf_sdio *bus)
+/* Detach and free everything */
+void brcmf_sdio_remove(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
 
-	brcmf_sdio_release(bus);
+	if (bus) {
+		/* De-register interrupt handler */
+		brcmf_sdiod_intr_unregister(bus->sdiodev);
+
+		cancel_work_sync(&bus->datawork);
+		if (bus->brcmf_wq)
+			destroy_workqueue(bus->brcmf_wq);
+
+		if (bus->sdiodev->bus_if->drvr) {
+			brcmf_detach(bus->sdiodev->dev);
+			brcmf_sdio_release_dongle(bus);
+		}
+
+		brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
+		brcmf_sdio_release_malloc(bus);
+		kfree(bus->hdrbuf);
+		kfree(bus);
+	}
 
 	brcmf_dbg(TRACE, "Disconnected\n");
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index e28498ed3520..a0981b32c729 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -236,7 +236,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
-void brcmf_sdio_disconnect(struct brcmf_sdio *bus);
+void brcmf_sdio_remove(struct brcmf_sdio *bus);
 void brcmf_sdio_isr(struct brcmf_sdio *bus);
 
 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
-- 
cgit v1.2.3


From 36c4e7e4aa0605cd175ee4b953eaced7a00157f4 Mon Sep 17 00:00:00 2001
From: Arend van Spriel
Date: Thu, 12 Dec 2013 11:59:06 +0100
Subject: brcmfmac: clarify struct brcmf_sdio_dev::func[0] reference

The struct brcmf_sdio_dev contains array of sdio functions that
are used in the driver. However, during probe func[0] entry was
assigned to the function 1 reference. This was corrected upon
doing the actual I/O access. This patch makes it more clear by
creating the func[0] entry properly and use it as is during
I/O access.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 36 +++++++++++-------------
 1 file changed, 16 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 7550f9f1211f..2b5cde67e728 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -197,32 +197,21 @@ int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 	return 0;
 }
 
-static inline int brcmf_sdiod_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
-					    uint regaddr, u8 *byte)
+static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func,
+					uint regaddr, u8 byte)
 {
-	struct sdio_func *sdfunc = sdiodev->func[0];
 	int err_ret;
 
 	/*
 	 * Can only directly write to some F0 registers.
-	 * Handle F2 enable/disable and Abort command
+	 * Handle CCCR_IENx and CCCR_ABORT command
 	 * as a special case.
 	 */
 	if ((regaddr == SDIO_CCCR_ABORT) ||
-	    (regaddr == SDIO_CCCR_IENx)) {
-		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
-				 GFP_KERNEL);
-		if (!sdfunc)
-			return -ENOMEM;
-		sdfunc->num = 0;
-		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
-		kfree(sdfunc);
-	} else if (regaddr < 0xF0) {
-		brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr);
-		err_ret = -EPERM;
-	} else {
-		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
-	}
+	    (regaddr == SDIO_CCCR_IENx))
+		sdio_writeb(func, byte, regaddr, &err_ret);
+	else
+		sdio_f0_writeb(func, byte, regaddr, &err_ret);
 
 	return err_ret;
 }
@@ -240,7 +229,8 @@ static int brcmf_sdiod_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
 
 	if (rw && func == 0) {
 		/* handle F0 separately */
-		err_ret = brcmf_sdiod_f0_write_byte(sdiodev, regaddr, byte);
+		err_ret = brcmf_sdiod_f0_writeb(sdiodev->func[func],
+						regaddr, *byte);
 	} else {
 		if (rw) /* CMD52 Write */
 			sdio_writeb(sdiodev->func[func], *byte, regaddr,
@@ -1030,7 +1020,11 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 		return -ENOMEM;
 	}
 
-	sdiodev->func[0] = func->card->sdio_func[0];
+	/* store refs to functions used. mmc_card does
+	 * not hold the F0 function pointer.
+	 */
+	sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL);
+	sdiodev->func[0]->num = 0;
 	sdiodev->func[1] = func->card->sdio_func[0];
 	sdiodev->func[2] = func;
 
@@ -1060,6 +1054,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 fail:
 	dev_set_drvdata(&func->dev, NULL);
 	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+	kfree(sdiodev->func[0]);
 	kfree(sdiodev);
 	kfree(bus_if);
 	return err;
@@ -1087,6 +1082,7 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func)
 		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
 
 		kfree(bus_if);
+		kfree(sdiodev->func[0]);
 		kfree(sdiodev);
 	}
 
-- 
cgit v1.2.3


From 1e51acaa02563ca96c0f3fa9827174cefde6093c Mon Sep 17 00:00:00 2001
From: Oleksij Rempel
Date: Thu, 12 Dec 2013 15:30:36 +0100
Subject: ath9k_htc: reconfigure led_gpios after resume

On suspend/resume, firmware will restart and gpios
configuration will be reseted. Restore this
configureation at least for LEDs

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  5 +++++
 drivers/net/wireless/ath/ath9k/htc_drv_gpio.c | 17 ++++++++++++-----
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |  2 ++
 3 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 055d7c25e090..58da3468d1f0 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -600,10 +600,15 @@ void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw);
 struct base_eep_header *ath9k_htc_get_eeprom_base(struct ath9k_htc_priv *priv);
 
 #ifdef CONFIG_MAC80211_LEDS
+void ath9k_configure_leds(struct ath9k_htc_priv *priv);
 void ath9k_init_leds(struct ath9k_htc_priv *priv);
 void ath9k_deinit_leds(struct ath9k_htc_priv *priv);
 void ath9k_led_work(struct work_struct *work);
 #else
+static inline void ath9k_configure_leds(struct ath9k_htc_priv *priv)
+{
+}
+
 static inline void ath9k_init_leds(struct ath9k_htc_priv *priv)
 {
 }
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 105582d6b714..50f74a2a4cf8 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -255,6 +255,17 @@ void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
 	cancel_work_sync(&priv->led_work);
 }
 
+
+void ath9k_configure_leds(struct ath9k_htc_priv *priv)
+{
+	/* Configure gpio 1 for output */
+	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	/* LED off, active low */
+	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
+
+}
+
 void ath9k_init_leds(struct ath9k_htc_priv *priv)
 {
 	int ret;
@@ -268,11 +279,7 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv)
 	else
 		priv->ah->led_pin = ATH_LED_PIN_DEF;
 
-	/* Configure gpio 1 for output */
-	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	/* LED off, active low */
-	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
+	ath9k_configure_leds(priv);
 
 	snprintf(priv->led_name, sizeof(priv->led_name),
 		"ath9k_htc-%s", wiphy_name(priv->hw->wiphy));
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index c3676bf1d6c4..b576c44bb314 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -1000,6 +1000,8 @@ int ath9k_htc_resume(struct htc_target *htc_handle)
 
 	ret = ath9k_init_htc_services(priv, priv->ah->hw_version.devid,
 				      priv->ah->hw_version.usbdev);
+	ath9k_configure_leds(priv);
+
 	return ret;
 }
 #endif
-- 
cgit v1.2.3


From 935d00ccf7321d704a1bf8e982dd6934165c1327 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi
Date: Thu, 12 Dec 2013 18:10:16 +0100
Subject: ath9k: fix 5/10MHz channel width initialization on ar9003

Move ath9k_hw_set_rfmode() after ath9k_hw_process_ini() in order to avoid
AR_PHY_MODE register is overwritten with default values by
ar9003_hw_process_ini()

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 4ee24b1eec38..1de98b895356 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1485,7 +1485,6 @@ static bool ath9k_hw_chip_reset(struct ath_hw *ah,
 	if (AR_SREV_9330(ah))
 		ar9003_hw_internal_regulator_apply(ah);
 	ath9k_hw_init_pll(ah, chan);
-	ath9k_hw_set_rfmode(ah, chan);
 
 	return true;
 }
@@ -1954,6 +1953,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (r)
 		return r;
 
+	ath9k_hw_set_rfmode(ah, chan);
+
 	if (ath9k_hw_mci_is_enabled(ah))
 		ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep);
 
-- 
cgit v1.2.3


From dd4a9ac05c8e17f40427878f379123263333bcd7 Mon Sep 17 00:00:00 2001
From: Bing Zhao
Date: Fri, 13 Dec 2013 18:32:59 -0800
Subject: mwifiex: send regulatory domain info to firmware only if alpha2
 changed

On cfg80211 regulatory domain change, drivers gets alpha2 country
code or "00" in driver's notification handler.

In most cases, the pattern will be US, 00, US, 00, US, 00, US, ...
There is no need to send domain info to firmware in case of "00" or
with the same alpha2 country code.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c  | 19 +++++++++++++------
 drivers/net/wireless/mwifiex/sta_ioctl.c |  8 ++++++++
 2 files changed, 21 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 3ff28c2149ce..ae12aaa793a1 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -542,19 +542,26 @@ static void mwifiex_reg_notifier(struct wiphy *wiphy,
 	wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for %c%c\n",
 		  request->alpha2[0], request->alpha2[1]);
 
-	memcpy(adapter->country_code, request->alpha2, sizeof(request->alpha2));
-
 	switch (request->initiator) {
 	case NL80211_REGDOM_SET_BY_DRIVER:
 	case NL80211_REGDOM_SET_BY_CORE:
 	case NL80211_REGDOM_SET_BY_USER:
-		break;
-		/* Todo: apply driver specific changes in channel flags based
-		   on the request initiator if necessary. */
 	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
 		break;
+	default:
+		wiphy_err(wiphy, "unknown regdom initiator: %d\n",
+			  request->initiator);
+		return;
+	}
+
+	/* Don't send world or same regdom info to firmware */
+	if (strncmp(request->alpha2, "00", 2) &&
+	    strncmp(request->alpha2, adapter->country_code,
+		    sizeof(request->alpha2))) {
+		memcpy(adapter->country_code, request->alpha2,
+		       sizeof(request->alpha2));
+		mwifiex_send_domain_info_cmd_fw(wiphy);
 	}
-	mwifiex_send_domain_info_cmd_fw(wiphy);
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index a09398fe9e2a..85f419825ecf 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -205,6 +205,14 @@ static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 		return 0;
 	}
 
+	if (!strncmp(priv->adapter->country_code, &country_ie[2], 2)) {
+		rcu_read_unlock();
+		wiphy_dbg(priv->wdev->wiphy,
+			  "11D: skip setting domain info in FW\n");
+		return 0;
+	}
+	memcpy(priv->adapter->country_code, &country_ie[2], 2);
+
 	domain_info->country_code[0] = country_ie[2];
 	domain_info->country_code[1] = country_ie[3];
 	domain_info->country_code[2] = ' ';
-- 
cgit v1.2.3


From d39fbc88956ef56a67b8030d53c7e8fa645a4e00 Mon Sep 17 00:00:00 2001
From: Bing Zhao
Date: Fri, 13 Dec 2013 18:33:00 -0800
Subject: mwifiex: remove cfg_data construction

The cfg_data buffer will include the cfg_data structure header
(action, type, data_len). This makes it work for all data types
without extra parsing.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h      |  9 ---------
 drivers/net/wireless/mwifiex/sta_cmd.c | 20 ++++++--------------
 2 files changed, 6 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 8fcb500fa09b..4cee6ceb7e9e 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -468,8 +468,6 @@ enum P2P_MODES {
 #define MWIFIEX_CRITERIA_UNICAST	BIT(1)
 #define MWIFIEX_CRITERIA_MULTICAST	BIT(3)
 
-#define CFG_DATA_TYPE_CAL		2
-
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
@@ -1592,12 +1590,6 @@ struct mwifiex_ie_list {
 	struct mwifiex_ie ie_list[MAX_MGMT_IE_INDEX];
 } __packed;
 
-struct host_cmd_ds_802_11_cfg_data {
-	__le16 action;
-	__le16 type;
-	__le16 data_len;
-} __packed;
-
 struct coalesce_filt_field_param {
 	u8 operation;
 	u8 operand_len;
@@ -1678,7 +1670,6 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_sys_config uap_sys_config;
 		struct host_cmd_ds_sta_deauth sta_deauth;
 		struct host_cmd_11ac_vht_cfg vht_cfg;
-		struct host_cmd_ds_802_11_cfg_data cfg_data;
 		struct host_cmd_ds_coalesce_cfg coalesce_cfg;
 	} params;
 } __packed;
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 1efa43ec1c6e..2368c7f030bb 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1158,28 +1158,20 @@ static u32 mwifiex_parse_cal_cfg(u8 *src, size_t len, u8 *dst)
 
 /* This function prepares command of set_cfg_data. */
 static int mwifiex_cmd_cfg_data(struct mwifiex_private *priv,
-				struct host_cmd_ds_command *cmd,
-				u16 cmd_action)
+				struct host_cmd_ds_command *cmd)
 {
-	struct host_cmd_ds_802_11_cfg_data *cfg_data = &cmd->params.cfg_data;
 	struct mwifiex_adapter *adapter = priv->adapter;
-	u32 len, cal_data_offset;
-	u8 *tmp_cmd = (u8 *)cmd;
+	u32 len;
+	u8 *data = (u8 *)cmd + S_DS_GEN;
 
-	cal_data_offset = S_DS_GEN + sizeof(*cfg_data);
 	if ((adapter->cal_data->data) && (adapter->cal_data->size > 0))
 		len = mwifiex_parse_cal_cfg((u8 *)adapter->cal_data->data,
-					    adapter->cal_data->size,
-					    (u8 *)(tmp_cmd + cal_data_offset));
+					    adapter->cal_data->size, data);
 	else
 		return -1;
 
-	cfg_data->action = cpu_to_le16(cmd_action);
-	cfg_data->type = cpu_to_le16(CFG_DATA_TYPE_CAL);
-	cfg_data->data_len = cpu_to_le16(len);
-
 	cmd->command = cpu_to_le16(HostCmd_CMD_CFG_DATA);
-	cmd->size = cpu_to_le16(S_DS_GEN + sizeof(*cfg_data) + len);
+	cmd->size = cpu_to_le16(S_DS_GEN + len);
 
 	return 0;
 }
@@ -1267,7 +1259,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		ret = mwifiex_cmd_get_hw_spec(priv, cmd_ptr);
 		break;
 	case HostCmd_CMD_CFG_DATA:
-		ret = mwifiex_cmd_cfg_data(priv, cmd_ptr, cmd_action);
+		ret = mwifiex_cmd_cfg_data(priv, cmd_ptr);
 		break;
 	case HostCmd_CMD_MAC_CONTROL:
 		ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action,
-- 
cgit v1.2.3


From 699b027b9cefbaf779ad8eaab5e9ea122620827c Mon Sep 17 00:00:00 2001
From: Bing Zhao
Date: Fri, 13 Dec 2013 18:33:01 -0800
Subject: mwifiex: download cal-data from device-tree to firmware

Currently only conf file based cal-data downloading is supported.
On embedded platforms a better place to store the cal-data is in
device tree. Add cal-data downloading from device tree to firmware.
Both methods can co-exist.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/main.h    |  2 ++
 drivers/net/wireless/mwifiex/sta_cmd.c | 61 +++++++++++++++++++++++++++++++---
 2 files changed, 58 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index dc34457557f3..2f5035492ef9 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -32,6 +32,7 @@
 #include <net/lib80211.h>
 #include <linux/firmware.h>
 #include <linux/ctype.h>
+#include <linux/of.h>
 
 #include "decl.h"
 #include "ioctl.h"
@@ -739,6 +740,7 @@ struct mwifiex_adapter {
 	u8 scan_delay_cnt;
 	u8 empty_tx_q_cnt;
 	const struct firmware *cal_data;
+	struct device_node *dt_node;
 
 	/* 11AC */
 	u32 is_hw_11ac_capable;
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 2368c7f030bb..6a9508695bbf 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1156,19 +1156,58 @@ static u32 mwifiex_parse_cal_cfg(u8 *src, size_t len, u8 *dst)
 	return d - dst;
 }
 
+static int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,
+				   struct device_node *node, const char *prefix)
+{
+#ifdef CONFIG_OF
+	struct property *prop;
+	size_t len = strlen(prefix);
+	int ret;
+
+	/* look for all matching property names */
+	for_each_property_of_node(node, prop) {
+		if (len > strlen(prop->name) ||
+		    strncmp(prop->name, prefix, len))
+			continue;
+
+		/* property header is 6 bytes */
+		if (prop && prop->value && prop->length > 6) {
+			ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_CFG_DATA,
+						    HostCmd_ACT_GEN_SET, 0,
+						    prop);
+			if (ret)
+				return ret;
+		}
+	}
+#endif
+	return 0;
+}
+
 /* This function prepares command of set_cfg_data. */
 static int mwifiex_cmd_cfg_data(struct mwifiex_private *priv,
-				struct host_cmd_ds_command *cmd)
+				struct host_cmd_ds_command *cmd, void *data_buf)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
+	struct property *prop = data_buf;
 	u32 len;
 	u8 *data = (u8 *)cmd + S_DS_GEN;
+	int ret;
 
-	if ((adapter->cal_data->data) && (adapter->cal_data->size > 0))
+	if (prop) {
+		len = prop->length;
+		ret = of_property_read_u8_array(adapter->dt_node, prop->name,
+						data, len);
+		if (ret)
+			return ret;
+		dev_dbg(adapter->dev,
+			"download cfg_data from device tree: %s\n", prop->name);
+	} else if (adapter->cal_data->data && adapter->cal_data->size > 0) {
 		len = mwifiex_parse_cal_cfg((u8 *)adapter->cal_data->data,
 					    adapter->cal_data->size, data);
-	else
+		dev_dbg(adapter->dev, "download cfg_data from config file\n");
+	} else {
 		return -1;
+	}
 
 	cmd->command = cpu_to_le16(HostCmd_CMD_CFG_DATA);
 	cmd->size = cpu_to_le16(S_DS_GEN + len);
@@ -1259,7 +1298,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		ret = mwifiex_cmd_get_hw_spec(priv, cmd_ptr);
 		break;
 	case HostCmd_CMD_CFG_DATA:
-		ret = mwifiex_cmd_cfg_data(priv, cmd_ptr);
+		ret = mwifiex_cmd_cfg_data(priv, cmd_ptr, data_buf);
 		break;
 	case HostCmd_CMD_MAC_CONTROL:
 		ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action,
@@ -1519,7 +1558,19 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 		if (ret)
 			return -1;
 
-		/* Download calibration data to firmware */
+		/* Download calibration data to firmware.
+		 * The cal-data can be read from device tree and/or
+		 * a configuration file and downloaded to firmware.
+		 */
+		adapter->dt_node =
+				of_find_node_by_name(NULL, "marvell_cfgdata");
+		if (adapter->dt_node) {
+			ret = mwifiex_dnld_dt_cfgdata(priv, adapter->dt_node,
+						      "marvell,caldata");
+			if (ret)
+				return -1;
+		}
+
 		if (adapter->cal_data) {
 			ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_CFG_DATA,
 						HostCmd_ACT_GEN_SET, 0, NULL);
-- 
cgit v1.2.3


From 82efa16ad2a30302e1d28ad9e6265a33a8ecc921 Mon Sep 17 00:00:00 2001
From: Bing Zhao
Date: Fri, 13 Dec 2013 18:33:02 -0800
Subject: mwifiex: download per country tx power table to firmware

When driver gets regulatory domain change notifications or before
associates to an AP with Country IE, the txpwrlimit table stored
in device tree for that country is downloaded to firmware.

The txpwrlimit downloading will happen only at the first time
when the alpha2 country code is changed. World regulatory domain
"00" notification doesn't trigger the downloading. This behavior
is same as domain_info command.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c  | 10 ++++++++++
 drivers/net/wireless/mwifiex/main.h      |  2 ++
 drivers/net/wireless/mwifiex/sta_cmd.c   |  4 ++--
 drivers/net/wireless/mwifiex/sta_ioctl.c |  7 +++++++
 4 files changed, 21 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index ae12aaa793a1..b994679abce0 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -538,6 +538,8 @@ static void mwifiex_reg_notifier(struct wiphy *wiphy,
 				 struct regulatory_request *request)
 {
 	struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
+	struct mwifiex_private *priv = mwifiex_get_priv(adapter,
+							MWIFIEX_BSS_ROLE_ANY);
 
 	wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for %c%c\n",
 		  request->alpha2[0], request->alpha2[1]);
@@ -561,6 +563,14 @@ static void mwifiex_reg_notifier(struct wiphy *wiphy,
 		memcpy(adapter->country_code, request->alpha2,
 		       sizeof(request->alpha2));
 		mwifiex_send_domain_info_cmd_fw(wiphy);
+
+		if (adapter->dt_node) {
+			char txpwr[] = {"marvell,00_txpwrlimit"};
+
+			memcpy(&txpwr[8], adapter->country_code, 2);
+			mwifiex_dnld_dt_cfgdata(priv, adapter->dt_node,
+						txpwr);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 2f5035492ef9..ab3416449bfd 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1153,6 +1153,8 @@ void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
 void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
 			      struct mwifiex_bssdescriptor *bss_desc);
 int mwifiex_11h_handle_event_chanswann(struct mwifiex_private *priv);
+int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,
+			    struct device_node *node, const char *prefix);
 
 extern const struct ethtool_ops mwifiex_ethtool_ops;
 
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 6a9508695bbf..9c2404cd755f 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1156,8 +1156,8 @@ static u32 mwifiex_parse_cal_cfg(u8 *src, size_t len, u8 *dst)
 	return d - dst;
 }
 
-static int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,
-				   struct device_node *node, const char *prefix)
+int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,
+			    struct device_node *node, const char *prefix)
 {
 #ifdef CONFIG_OF
 	struct property *prop;
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 85f419825ecf..3edc92fad319 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -234,6 +234,13 @@ static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 		return -1;
 	}
 
+	if (priv->adapter->dt_node) {
+		char txpwr[] = {"marvell,00_txpwrlimit"};
+
+		memcpy(&txpwr[8], priv->adapter->country_code, 2);
+		mwifiex_dnld_dt_cfgdata(priv, priv->adapter->dt_node, txpwr);
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 03a71e03282e02cc1cf7884f31314d9c55db9a82 Mon Sep 17 00:00:00 2001
From: Rashika Kheria
Date: Sat, 14 Dec 2013 17:57:14 +0530
Subject: drivers: net: Mark functions as static in 3945-debug.c

This patch marks the function il3945_ucode_rx_stats_read(),
il3945_ucode_tx_stats_read() and il3945_ucode_general_stats_read() in
3945-debug.c as static because they are not used outside this file.

Thus, it also removes the following warnings in
wireless/iwlegacy/3945-debug.c:

drivers/net/wireless/iwlegacy/3945-debug.c:52:1: warning: no previous prototype for ‘il3945_ucode_rx_stats_read’ [-Wmissing-prototypes]
drivers/net/wireless/iwlegacy/3945-debug.c:317:1: warning: no previous prototype for ‘il3945_ucode_tx_stats_read’ [-Wmissing-prototypes]
drivers/net/wireless/iwlegacy/3945-debug.c:407:1: warning: no previous prototype for ‘il3945_ucode_general_stats_read’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/3945-debug.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/3945-debug.c b/drivers/net/wireless/iwlegacy/3945-debug.c
index f767dd106b09..c1b4441fb8b2 100644
--- a/drivers/net/wireless/iwlegacy/3945-debug.c
+++ b/drivers/net/wireless/iwlegacy/3945-debug.c
@@ -48,7 +48,7 @@ il3945_stats_flag(struct il_priv *il, char *buf, int bufsz)
 	return p;
 }
 
-ssize_t
+static ssize_t
 il3945_ucode_rx_stats_read(struct file *file, char __user *user_buf,
 			   size_t count, loff_t *ppos)
 {
@@ -313,7 +313,7 @@ il3945_ucode_rx_stats_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-ssize_t
+static ssize_t
 il3945_ucode_tx_stats_read(struct file *file, char __user *user_buf,
 			   size_t count, loff_t *ppos)
 {
@@ -403,7 +403,7 @@ il3945_ucode_tx_stats_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-ssize_t
+static ssize_t
 il3945_ucode_general_stats_read(struct file *file, char __user *user_buf,
 				size_t count, loff_t *ppos)
 {
-- 
cgit v1.2.3


From 0e06b090ff5af1d734c59baf68d0da70e639e764 Mon Sep 17 00:00:00 2001
From: Rashika Kheria
Date: Sat, 14 Dec 2013 17:58:38 +0530
Subject: drivers: net: Mark functions as static in 4965-debug.c

This patch marks the function il4965_ucode_rx_stats_read(),
il4965_ucode_tx_stats_read() and il4965_ucode_general_stats_read() in
4965-debug.c as static because they are not used outside this file.

Thus, it also removes the following warnings in
wireless/iwlegacy/4965-debug.c:

drivers/net/wireless/iwlegacy/4965-debug.c:59:1: warning: no previous prototype for ‘il4965_ucode_rx_stats_read’ [-Wmissing-prototypes]
drivers/net/wireless/iwlegacy/4965-debug.c:471:1: warning: no previous prototype for ‘il4965_ucode_tx_stats_read’ [-Wmissing-prototypes]
drivers/net/wireless/iwlegacy/4965-debug.c:637:1: warning: no previous prototype for ‘il4965_ucode_general_stats_read’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/4965-debug.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/4965-debug.c b/drivers/net/wireless/iwlegacy/4965-debug.c
index c8153fc64f74..e0597bfdddb8 100644
--- a/drivers/net/wireless/iwlegacy/4965-debug.c
+++ b/drivers/net/wireless/iwlegacy/4965-debug.c
@@ -55,7 +55,7 @@ il4965_stats_flag(struct il_priv *il, char *buf, int bufsz)
 	return p;
 }
 
-ssize_t
+static ssize_t
 il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf,
 			   size_t count, loff_t *ppos)
 {
@@ -467,7 +467,7 @@ il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-ssize_t
+static ssize_t
 il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf,
 			   size_t count, loff_t *ppos)
 {
@@ -633,7 +633,7 @@ il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-ssize_t
+static ssize_t
 il4965_ucode_general_stats_read(struct file *file, char __user *user_buf,
 				size_t count, loff_t *ppos)
 {
-- 
cgit v1.2.3


From c8aa5ab7d53b71fd019a2ee03d9b39517a89ff00 Mon Sep 17 00:00:00 2001
From: Rashika Kheria
Date: Sat, 14 Dec 2013 18:00:25 +0530
Subject: drivers: net: Mark functions as static in debug.c

This patch marks the function il_clear_traffic_stats() in debug.c as
static because they are not used outside this file.

Thus, it also removes the following warnings in
wireless/iwlegacy/debug.c:

drivers/net/wireless/iwlegacy/debug.c:35:1: warning: no previous prototype for ‘il_clear_traffic_stats’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/iwlegacy/debug.c b/drivers/net/wireless/iwlegacy/debug.c
index 3a487a3bb5de..344010153196 100644
--- a/drivers/net/wireless/iwlegacy/debug.c
+++ b/drivers/net/wireless/iwlegacy/debug.c
@@ -31,7 +31,7 @@
 
 #include "common.h"
 
-void
+static void
 il_clear_traffic_stats(struct il_priv *il)
 {
 	memset(&il->tx_stats, 0, sizeof(struct traffic_stats));
-- 
cgit v1.2.3


From f40c46082717cea32ba1852c8217cbb9693fe80f Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:35 +0100
Subject: ath9k_common: get rid of an unnecessary variable

There's no need to truncate curchan->hw_value to u8

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/common.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index a7e5a05b2eff..768c733cad31 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -98,10 +98,8 @@ struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw,
 {
 	struct ieee80211_channel *curchan = chandef->chan;
 	struct ath9k_channel *channel;
-	u8 chan_idx;
 
-	chan_idx = curchan->hw_value;
-	channel = &ah->channels[chan_idx];
+	channel = &ah->channels[curchan->hw_value];
 	ath9k_cmn_update_ichannel(channel, chandef);
 
 	return channel;
-- 
cgit v1.2.3


From e45e91d8812c1cd4dac98efd6fb6d0dd27fa3d4a Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:36 +0100
Subject: ath9k: add support for reporting per-chain signal strength

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/antenna.c    |  8 ++++----
 drivers/net/wireless/ath/ath9k/ar9003_mac.c | 12 ++++++------
 drivers/net/wireless/ath/ath9k/dfs.c        |  4 ++--
 drivers/net/wireless/ath/ath9k/mac.c        | 24 ++++++++++++------------
 drivers/net/wireless/ath/ath9k/mac.h        |  8 ++------
 drivers/net/wireless/ath/ath9k/recv.c       | 25 ++++++++++++++++++++-----
 6 files changed, 46 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/antenna.c b/drivers/net/wireless/ath/ath9k/antenna.c
index bd048cc69a33..a3668433dc02 100644
--- a/drivers/net/wireless/ath/ath9k/antenna.c
+++ b/drivers/net/wireless/ath/ath9k/antenna.c
@@ -724,14 +724,14 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
 	struct ath_ant_comb *antcomb = &sc->ant_comb;
 	int alt_ratio = 0, alt_rssi_avg = 0, main_rssi_avg = 0, curr_alt_set;
 	int curr_main_set;
-	int main_rssi = rs->rs_rssi_ctl0;
-	int alt_rssi = rs->rs_rssi_ctl1;
+	int main_rssi = rs->rs_rssi_ctl[0];
+	int alt_rssi = rs->rs_rssi_ctl[1];
 	int rx_ant_conf,  main_ant_conf;
 	bool short_scan = false, ret;
 
-	rx_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_CURRENT_SHIFT) &
+	rx_ant_conf = (rs->rs_rssi_ctl[2] >> ATH_ANT_RX_CURRENT_SHIFT) &
 		       ATH_ANT_RX_MASK;
-	main_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_MAIN_SHIFT) &
+	main_ant_conf = (rs->rs_rssi_ctl[2] >> ATH_ANT_RX_MAIN_SHIFT) &
 			 ATH_ANT_RX_MASK;
 
 	if (alt_rssi >= antcomb->low_rssi_thresh) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index f6c5c1b50471..6eb8657681bf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -476,12 +476,12 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
 
 	/* XXX: Keycache */
 	rxs->rs_rssi = MS(rxsp->status5, AR_RxRSSICombined);
-	rxs->rs_rssi_ctl0 = MS(rxsp->status1, AR_RxRSSIAnt00);
-	rxs->rs_rssi_ctl1 = MS(rxsp->status1, AR_RxRSSIAnt01);
-	rxs->rs_rssi_ctl2 = MS(rxsp->status1, AR_RxRSSIAnt02);
-	rxs->rs_rssi_ext0 = MS(rxsp->status5, AR_RxRSSIAnt10);
-	rxs->rs_rssi_ext1 = MS(rxsp->status5, AR_RxRSSIAnt11);
-	rxs->rs_rssi_ext2 = MS(rxsp->status5, AR_RxRSSIAnt12);
+	rxs->rs_rssi_ctl[0] = MS(rxsp->status1, AR_RxRSSIAnt00);
+	rxs->rs_rssi_ctl[1] = MS(rxsp->status1, AR_RxRSSIAnt01);
+	rxs->rs_rssi_ctl[2] = MS(rxsp->status1, AR_RxRSSIAnt02);
+	rxs->rs_rssi_ext[0] = MS(rxsp->status5, AR_RxRSSIAnt10);
+	rxs->rs_rssi_ext[1] = MS(rxsp->status5, AR_RxRSSIAnt11);
+	rxs->rs_rssi_ext[2] = MS(rxsp->status5, AR_RxRSSIAnt12);
 
 	if (rxsp->status11 & AR_RxKeyIdxValid)
 		rxs->rs_keyix = MS(rxsp->status11, AR_KeyIdx);
diff --git a/drivers/net/wireless/ath/ath9k/dfs.c b/drivers/net/wireless/ath/ath9k/dfs.c
index 7187d3671512..857bb28b3894 100644
--- a/drivers/net/wireless/ath/ath9k/dfs.c
+++ b/drivers/net/wireless/ath/ath9k/dfs.c
@@ -158,8 +158,8 @@ void ath9k_dfs_process_phyerr(struct ath_softc *sc, void *data,
 		return;
 	}
 
-	ard.rssi = rs->rs_rssi_ctl0;
-	ard.ext_rssi = rs->rs_rssi_ext0;
+	ard.rssi = rs->rs_rssi_ctl[0];
+	ard.ext_rssi = rs->rs_rssi_ext[0];
 
 	/*
 	 * hardware stores this as 8 bit signed value.
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 6a18f9d3e9cc..a8504822b4fd 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -550,25 +550,25 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 
 	if (ads.ds_rxstatus8 & AR_PostDelimCRCErr) {
 		rs->rs_rssi = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ctl0 = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ctl1 = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ctl2 = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ext0 = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ext1 = ATH9K_RSSI_BAD;
-		rs->rs_rssi_ext2 = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ctl[0] = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ctl[1] = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ctl[2] = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ext[0] = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ext[1] = ATH9K_RSSI_BAD;
+		rs->rs_rssi_ext[2] = ATH9K_RSSI_BAD;
 	} else {
 		rs->rs_rssi = MS(ads.ds_rxstatus4, AR_RxRSSICombined);
-		rs->rs_rssi_ctl0 = MS(ads.ds_rxstatus0,
+		rs->rs_rssi_ctl[0] = MS(ads.ds_rxstatus0,
 						AR_RxRSSIAnt00);
-		rs->rs_rssi_ctl1 = MS(ads.ds_rxstatus0,
+		rs->rs_rssi_ctl[1] = MS(ads.ds_rxstatus0,
 						AR_RxRSSIAnt01);
-		rs->rs_rssi_ctl2 = MS(ads.ds_rxstatus0,
+		rs->rs_rssi_ctl[2] = MS(ads.ds_rxstatus0,
 						AR_RxRSSIAnt02);
-		rs->rs_rssi_ext0 = MS(ads.ds_rxstatus4,
+		rs->rs_rssi_ext[0] = MS(ads.ds_rxstatus4,
 						AR_RxRSSIAnt10);
-		rs->rs_rssi_ext1 = MS(ads.ds_rxstatus4,
+		rs->rs_rssi_ext[1] = MS(ads.ds_rxstatus4,
 						AR_RxRSSIAnt11);
-		rs->rs_rssi_ext2 = MS(ads.ds_rxstatus4,
+		rs->rs_rssi_ext[2] = MS(ads.ds_rxstatus4,
 						AR_RxRSSIAnt12);
 	}
 	if (ads.ds_rxstatus8 & AR_RxKeyIdxValid)
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index e3eed81f2439..10271373a0cd 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -133,12 +133,8 @@ struct ath_rx_status {
 	u8 rs_rate;
 	u8 rs_antenna;
 	u8 rs_more;
-	int8_t rs_rssi_ctl0;
-	int8_t rs_rssi_ctl1;
-	int8_t rs_rssi_ctl2;
-	int8_t rs_rssi_ext0;
-	int8_t rs_rssi_ext1;
-	int8_t rs_rssi_ext2;
+	int8_t rs_rssi_ctl[3];
+	int8_t rs_rssi_ext[3];
 	u8 rs_isaggr;
 	u8 rs_firstaggr;
 	u8 rs_moreaggr;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 95ddca5495d4..2410224b6def 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -906,6 +906,7 @@ static void ath9k_process_rssi(struct ath_common *common,
 	struct ath_hw *ah = common->ah;
 	int last_rssi;
 	int rssi = rx_stats->rs_rssi;
+	int i, j;
 
 	/*
 	 * RSSI is not available for subframes in an A-MPDU.
@@ -924,6 +925,20 @@ static void ath9k_process_rssi(struct ath_common *common,
 		return;
 	}
 
+	for (i = 0, j = 0; i < ARRAY_SIZE(rx_stats->rs_rssi_ctl); i++) {
+		s8 rssi;
+
+		if (!(ah->rxchainmask & BIT(i)))
+			continue;
+
+		rssi = rx_stats->rs_rssi_ctl[i];
+		if (rssi != ATH9K_RSSI_BAD) {
+		    rxs->chains |= BIT(j);
+		    rxs->chain_signal[j] = ah->noise + rssi;
+		}
+		j++;
+	}
+
 	/*
 	 * Update Beacon RSSI, this is used by ANI.
 	 */
@@ -1073,14 +1088,14 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
 		fft_sample_40.channel_type = chan_type;
 
 		if (chan_type == NL80211_CHAN_HT40PLUS) {
-			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
-			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ext0);
+			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
+			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
 
 			fft_sample_40.lower_noise = ah->noise;
 			fft_sample_40.upper_noise = ext_nf;
 		} else {
-			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ext0);
-			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
+			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
+			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
 
 			fft_sample_40.lower_noise = ext_nf;
 			fft_sample_40.upper_noise = ah->noise;
@@ -1116,7 +1131,7 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
 		fft_sample_20.tlv.length = __cpu_to_be16(length);
 		fft_sample_20.freq = __cpu_to_be16(freq);
 
-		fft_sample_20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
+		fft_sample_20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
 		fft_sample_20.noise = ah->noise;
 
 		mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
-- 
cgit v1.2.3


From 168c6f89a27b605fb7dc3e1572ee5b2a6f56c935 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:37 +0100
Subject: ath9k_hw: use a software timer for btcoex no_stomp_timer

TSF accuracy is not needed here, and there is only one usable generic
timer that is supported by all chips and uses the primary TSF counter.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  7 ++---
 drivers/net/wireless/ath/ath9k/gpio.c  | 53 +++++++---------------------------
 drivers/net/wireless/ath/ath9k/mci.c   |  2 +-
 3 files changed, 15 insertions(+), 47 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 5e5d5cb2458c..dbf2a97d4daa 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -477,20 +477,19 @@ enum bt_op_flags {
 };
 
 struct ath_btcoex {
-	bool hw_timer_enabled;
 	spinlock_t btcoex_lock;
 	struct timer_list period_timer; /* Timer for BT period */
+	struct timer_list no_stomp_timer;
 	u32 bt_priority_cnt;
 	unsigned long bt_priority_time;
 	unsigned long op_flags;
 	int bt_stomp_type; /* Types of BT stomping */
-	u32 btcoex_no_stomp; /* in usec */
+	u32 btcoex_no_stomp; /* in msec */
 	u32 btcoex_period; /* in msec */
-	u32 btscan_no_stomp; /* in usec */
+	u32 btscan_no_stomp; /* in msec */
 	u32 duty_cycle;
 	u32 bt_wait_time;
 	int rssi_count;
-	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
 	struct ath_mci_profile mci;
 	u8 stomp_audio;
 };
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index c34f21241da9..a85e220c8d9c 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -257,19 +257,9 @@ static void ath_btcoex_period_timer(unsigned long data)
 
 	spin_unlock_bh(&btcoex->btcoex_lock);
 
-	/*
-	 * btcoex_period is in msec while (btocex/btscan_)no_stomp are in usec,
-	 * ensure that we properly convert btcoex_period to usec
-	 * for any comparision with (btcoex/btscan_)no_stomp.
-	 */
-	if (btcoex->btcoex_period * 1000 != btcoex->btcoex_no_stomp) {
-		if (btcoex->hw_timer_enabled)
-			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
-
-		ath9k_gen_timer_start(ah, btcoex->no_stomp_timer, timer_period,
-				      timer_period * 10);
-		btcoex->hw_timer_enabled = true;
-	}
+	if (btcoex->btcoex_period != btcoex->btcoex_no_stomp)
+		mod_timer(&btcoex->no_stomp_timer,
+			 jiffies + msecs_to_jiffies(timer_period));
 
 	ath9k_ps_restore(sc);
 
@@ -282,7 +272,7 @@ skip_hw_wakeup:
  * Generic tsf based hw timer which configures weight
  * registers to time slice between wlan and bt traffic
  */
-static void ath_btcoex_no_stomp_timer(void *arg)
+static void ath_btcoex_no_stomp_timer(unsigned long arg)
 {
 	struct ath_softc *sc = (struct ath_softc *)arg;
 	struct ath_hw *ah = sc->sc_ah;
@@ -311,24 +301,18 @@ static int ath_init_btcoex_timer(struct ath_softc *sc)
 	struct ath_btcoex *btcoex = &sc->btcoex;
 
 	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD;
-	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) * 1000 *
+	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
 		btcoex->btcoex_period / 100;
-	btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) * 1000 *
+	btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) *
 				   btcoex->btcoex_period / 100;
 
 	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
 			(unsigned long) sc);
+	setup_timer(&btcoex->no_stomp_timer, ath_btcoex_no_stomp_timer,
+			(unsigned long) sc);
 
 	spin_lock_init(&btcoex->btcoex_lock);
 
-	btcoex->no_stomp_timer = ath_gen_timer_alloc(sc->sc_ah,
-			ath_btcoex_no_stomp_timer,
-			ath_btcoex_no_stomp_timer,
-			(void *) sc, AR_FIRST_NDP_TIMER);
-
-	if (!btcoex->no_stomp_timer)
-		return -ENOMEM;
-
 	return 0;
 }
 
@@ -343,10 +327,7 @@ void ath9k_btcoex_timer_resume(struct ath_softc *sc)
 	ath_dbg(ath9k_hw_common(ah), BTCOEX, "Starting btcoex timers\n");
 
 	/* make sure duty cycle timer is also stopped when resuming */
-	if (btcoex->hw_timer_enabled) {
-		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
-		btcoex->hw_timer_enabled = false;
-	}
+	del_timer_sync(&btcoex->no_stomp_timer);
 
 	btcoex->bt_priority_cnt = 0;
 	btcoex->bt_priority_time = jiffies;
@@ -363,24 +344,16 @@ void ath9k_btcoex_timer_resume(struct ath_softc *sc)
 void ath9k_btcoex_timer_pause(struct ath_softc *sc)
 {
 	struct ath_btcoex *btcoex = &sc->btcoex;
-	struct ath_hw *ah = sc->sc_ah;
 
 	del_timer_sync(&btcoex->period_timer);
-
-	if (btcoex->hw_timer_enabled) {
-		ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
-		btcoex->hw_timer_enabled = false;
-	}
+	del_timer_sync(&btcoex->no_stomp_timer);
 }
 
 void ath9k_btcoex_stop_gen_timer(struct ath_softc *sc)
 {
 	struct ath_btcoex *btcoex = &sc->btcoex;
 
-	if (btcoex->hw_timer_enabled) {
-		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
-		btcoex->hw_timer_enabled = false;
-	}
+	del_timer_sync(&btcoex->no_stomp_timer);
 }
 
 u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
@@ -447,10 +420,6 @@ void ath9k_deinit_btcoex(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
 
-        if ((sc->btcoex.no_stomp_timer) &&
-	    ath9k_hw_get_btcoex_scheme(sc->sc_ah) == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
-
 	if (ath9k_hw_mci_is_enabled(ah))
 		ath_mci_cleanup(sc);
 }
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 0ac1b5f04256..71799fcade54 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -200,7 +200,7 @@ skip_tuning:
 	if (btcoex->duty_cycle > ATH_MCI_MAX_DUTY_CYCLE)
 		btcoex->duty_cycle = ATH_MCI_MAX_DUTY_CYCLE;
 
-	btcoex->btcoex_no_stomp =  btcoex->btcoex_period * 1000 *
+	btcoex->btcoex_no_stomp =  btcoex->btcoex_period *
 		(100 - btcoex->duty_cycle) / 100;
 
 	ath9k_hw_btcoex_enable(sc->sc_ah);
-- 
cgit v1.2.3


From c67ce33919d57627e98fadceea555ddc01ad77b4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:38 +0100
Subject: ath9k_hw: clean up generic timer code

- Use generic bitops instead of custom hackery
- Move interrupt enable/disable logic from ath9k to ath9k_hw
- Decouple ISR call from btcoex
- Make the overflow callback optional (to prevent IRQ storms)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/btcoex.c |  6 ---
 drivers/net/wireless/ath/ath9k/gpio.c   | 36 -------------
 drivers/net/wireless/ath/ath9k/hw.c     | 92 +++++++++++++++------------------
 drivers/net/wireless/ath/ath9k/hw.h     | 12 +----
 drivers/net/wireless/ath/ath9k/main.c   |  3 ++
 5 files changed, 45 insertions(+), 104 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 9963b0bf9f72..3dfc2c7f1f07 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -66,7 +66,6 @@ void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
 		.bt_first_slot_time = 5,
 		.bt_hold_rx_clear = true,
 	};
-	u32 i, idx;
 	bool rxclear_polarity = ath_bt_config.bt_rxclear_polarity;
 
 	if (AR_SREV_9300_20_OR_LATER(ah))
@@ -88,11 +87,6 @@ void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
 		SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) |
 		SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) |
 		AR_BT_DISABLE_BT_ANT;
-
-	for (i = 0; i < 32; i++) {
-		idx = (debruijn32 << i) >> 27;
-		ah->hw_gen_timers.gen_timer_index[idx] = i;
-	}
 }
 EXPORT_SYMBOL(ath9k_hw_init_btcoex_hw);
 
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index a85e220c8d9c..b1956bf6e01e 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -157,36 +157,6 @@ static void ath_detect_bt_priority(struct ath_softc *sc)
 	}
 }
 
-static void ath9k_gen_timer_start(struct ath_hw *ah,
-				  struct ath_gen_timer *timer,
-				  u32 trig_timeout,
-				  u32 timer_period)
-{
-	ath9k_hw_gen_timer_start(ah, timer, trig_timeout, timer_period);
-
-	if ((ah->imask & ATH9K_INT_GENTIMER) == 0) {
-		ath9k_hw_disable_interrupts(ah);
-		ah->imask |= ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah);
-		ath9k_hw_enable_interrupts(ah);
-	}
-}
-
-static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
-{
-	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
-
-	ath9k_hw_gen_timer_stop(ah, timer);
-
-	/* if no timer is enabled, turn off interrupt mask */
-	if (timer_table->timer_mask.val == 0) {
-		ath9k_hw_disable_interrupts(ah);
-		ah->imask &= ~ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah);
-		ath9k_hw_enable_interrupts(ah);
-	}
-}
-
 static void ath_mci_ftp_adjust(struct ath_softc *sc)
 {
 	struct ath_btcoex *btcoex = &sc->btcoex;
@@ -373,12 +343,6 @@ u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
 
 void ath9k_btcoex_handle_interrupt(struct ath_softc *sc, u32 status)
 {
-	struct ath_hw *ah = sc->sc_ah;
-
-	if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
-		if (status & ATH9K_INT_GENTIMER)
-			ath_gen_timer_isr(sc->sc_ah);
-
 	if (status & ATH9K_INT_MCI)
 		ath_mci_intr(sc);
 }
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1de98b895356..3b10a6bb07d4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/time.h>
+#include <linux/bitops.h>
 #include <asm/unaligned.h>
 
 #include "hw.h"
@@ -2991,20 +2992,6 @@ static const struct ath_gen_timer_configuration gen_tmr_configuration[] =
 
 /* HW generic timer primitives */
 
-/* compute and clear index of rightmost 1 */
-static u32 rightmost_index(struct ath_gen_timer_table *timer_table, u32 *mask)
-{
-	u32 b;
-
-	b = *mask;
-	b &= (0-b);
-	*mask &= ~b;
-	b *= debruijn32;
-	b >>= 27;
-
-	return timer_table->gen_timer_index[b];
-}
-
 u32 ath9k_hw_gettsf32(struct ath_hw *ah)
 {
 	return REG_READ(ah, AR_TSF_L32);
@@ -3020,6 +3007,10 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	struct ath_gen_timer *timer;
 
+	if ((timer_index < AR_FIRST_NDP_TIMER) ||
+		(timer_index >= ATH_MAX_GEN_TIMER))
+		return NULL;
+
 	timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
 	if (timer == NULL)
 		return NULL;
@@ -3037,23 +3028,13 @@ EXPORT_SYMBOL(ath_gen_timer_alloc);
 
 void ath9k_hw_gen_timer_start(struct ath_hw *ah,
 			      struct ath_gen_timer *timer,
-			      u32 trig_timeout,
+			      u32 timer_next,
 			      u32 timer_period)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
-	u32 tsf, timer_next;
-
-	BUG_ON(!timer_period);
-
-	set_bit(timer->index, &timer_table->timer_mask.timer_bits);
-
-	tsf = ath9k_hw_gettsf32(ah);
-
-	timer_next = tsf + trig_timeout;
+	u32 mask = 0;
 
-	ath_dbg(ath9k_hw_common(ah), BTCOEX,
-		"current tsf %x period %x timer_next %x\n",
-		tsf, timer_period, timer_next);
+	timer_table->timer_mask |= BIT(timer->index);
 
 	/*
 	 * Program generic timer registers
@@ -3079,10 +3060,19 @@ void ath9k_hw_gen_timer_start(struct ath_hw *ah,
 				       (1 << timer->index));
 	}
 
-	/* Enable both trigger and thresh interrupt masks */
-	REG_SET_BIT(ah, AR_IMR_S5,
-		(SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
-		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
+	if (timer->trigger)
+		mask |= SM(AR_GENTMR_BIT(timer->index),
+			   AR_IMR_S5_GENTIMER_TRIG);
+	if (timer->overflow)
+		mask |= SM(AR_GENTMR_BIT(timer->index),
+			   AR_IMR_S5_GENTIMER_THRESH);
+
+	REG_SET_BIT(ah, AR_IMR_S5, mask);
+
+	if ((ah->imask & ATH9K_INT_GENTIMER) == 0) {
+		ah->imask |= ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah);
+	}
 }
 EXPORT_SYMBOL(ath9k_hw_gen_timer_start);
 
@@ -3090,11 +3080,6 @@ void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 
-	if ((timer->index < AR_FIRST_NDP_TIMER) ||
-		(timer->index >= ATH_MAX_GEN_TIMER)) {
-		return;
-	}
-
 	/* Clear generic timer enable bits. */
 	REG_CLR_BIT(ah, gen_tmr_configuration[timer->index].mode_addr,
 			gen_tmr_configuration[timer->index].mode_mask);
@@ -3114,7 +3099,12 @@ void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
 		(SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
 		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
 
-	clear_bit(timer->index, &timer_table->timer_mask.timer_bits);
+	timer_table->timer_mask &= ~BIT(timer->index);
+
+	if (timer_table->timer_mask == 0) {
+		ah->imask &= ~ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah);
+	}
 }
 EXPORT_SYMBOL(ath9k_hw_gen_timer_stop);
 
@@ -3135,32 +3125,32 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	struct ath_gen_timer *timer;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 trigger_mask, thresh_mask, index;
+	unsigned long trigger_mask, thresh_mask;
+	unsigned int index;
 
 	/* get hardware generic timer interrupt status */
 	trigger_mask = ah->intr_gen_timer_trigger;
 	thresh_mask = ah->intr_gen_timer_thresh;
-	trigger_mask &= timer_table->timer_mask.val;
-	thresh_mask &= timer_table->timer_mask.val;
+	trigger_mask &= timer_table->timer_mask;
+	thresh_mask &= timer_table->timer_mask;
 
 	trigger_mask &= ~thresh_mask;
 
-	while (thresh_mask) {
-		index = rightmost_index(timer_table, &thresh_mask);
+	for_each_set_bit(index, &thresh_mask, ARRAY_SIZE(timer_table->timers)) {
 		timer = timer_table->timers[index];
-		BUG_ON(!timer);
-		ath_dbg(common, BTCOEX, "TSF overflow for Gen timer %d\n",
-			index);
+		if (!timer)
+		    continue;
+		if (!timer->overflow)
+		    continue;
 		timer->overflow(timer->arg);
 	}
 
-	while (trigger_mask) {
-		index = rightmost_index(timer_table, &trigger_mask);
+	for_each_set_bit(index, &trigger_mask, ARRAY_SIZE(timer_table->timers)) {
 		timer = timer_table->timers[index];
-		BUG_ON(!timer);
-		ath_dbg(common, BTCOEX,
-			"Gen timer[%d] trigger\n", index);
+		if (!timer)
+		    continue;
+		if (!timer->trigger)
+		    continue;
 		timer->trigger(timer->arg);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b1ff54631dca..1b45920f0448 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -499,12 +499,6 @@ struct ath9k_hw_version {
 
 #define AR_GENTMR_BIT(_index)	(1 << (_index))
 
-/*
- * Using de Bruijin sequence to look up 1's index in a 32 bit number
- * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001
- */
-#define debruijn32 0x077CB531U
-
 struct ath_gen_timer_configuration {
 	u32 next_addr;
 	u32 period_addr;
@@ -520,12 +514,8 @@ struct ath_gen_timer {
 };
 
 struct ath_gen_timer_table {
-	u32 gen_timer_index[32];
 	struct ath_gen_timer *timers[ATH_MAX_GEN_TIMER];
-	union {
-		unsigned long timer_bits;
-		u16 val;
-	} timer_mask;
+	u16 timer_mask;
 };
 
 struct ath_hw_antcomb_conf {
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b1dcf89138d3..4798f6ae061e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -508,6 +508,9 @@ void ath9k_tasklet(unsigned long data)
 		wake_up(&sc->tx_wait);
 	}
 
+	if (status & ATH9K_INT_GENTIMER)
+		ath_gen_timer_isr(sc->sc_ah);
+
 	ath9k_btcoex_handle_interrupt(sc, status);
 
 	/* re-enable hardware interrupt */
-- 
cgit v1.2.3


From 60c4bf29747ebcc2c467c1143a512cee92fc673f Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:39 +0100
Subject: ath9k_hw: remove defunct ad-hoc mode ATIM window handling code

The hardware does not have support for ATIM processing, and the driver
does not set up ah->atim_window anywhere. Additionally, the code can
clobber the timer used by P2P powersave.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 5 -----
 drivers/net/wireless/ath/ath9k/hw.h | 1 -
 2 files changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3b10a6bb07d4..c486d0f8b3d3 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -486,7 +486,6 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
 	ah->hw_version.magic = AR5416_MAGIC;
 	ah->hw_version.subvendorid = 0;
 
-	ah->atim_window = 0;
 	ah->sta_id1_defaults =
 		AR_STA_ID1_CRPT_MIC_ENABLE |
 		AR_STA_ID1_MCAST_KSRCH;
@@ -2266,9 +2265,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 	case NL80211_IFTYPE_ADHOC:
 		REG_SET_BIT(ah, AR_TXCFG,
 			    AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
-		REG_WRITE(ah, AR_NEXT_NDP_TIMER, next_beacon +
-			  TU_TO_USEC(ah->atim_window ? ah->atim_window : 1));
-		flags |= AR_NDP_TIMER_EN;
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_AP:
 		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, next_beacon);
@@ -2289,7 +2285,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 	REG_WRITE(ah, AR_BEACON_PERIOD, beacon_period);
 	REG_WRITE(ah, AR_DMA_BEACON_PERIOD, beacon_period);
 	REG_WRITE(ah, AR_SWBA_PERIOD, beacon_period);
-	REG_WRITE(ah, AR_NDP_PERIOD, beacon_period);
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 1b45920f0448..3a7068236507 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -776,7 +776,6 @@ struct ath_hw {
 	u32 txurn_interrupt_mask;
 	atomic_t intr_ref_cnt;
 	bool chip_fullsleep;
-	u32 atim_window;
 	u32 modes_index;
 
 	/* Calibration */
-- 
cgit v1.2.3


From 787e05360bbe54b0cd95f2f424ca3c3d1d3639db Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:40 +0100
Subject: ath9k_hw: remove ah->config.pcie_clock_req

It is unused

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_hw.c | 8 ++------
 drivers/net/wireless/ath/ath9k/hw.c        | 1 -
 drivers/net/wireless/ath/ath9k/hw.h        | 1 -
 3 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index 5c95fd9e9c9e..149aba3c7298 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -32,12 +32,8 @@ static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
 		return 0;
 	}
 
-	if (ah->config.pcie_clock_req)
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			   ar9280PciePhy_clkreq_off_L1_9280);
-	else
-		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			   ar9280PciePhy_clkreq_always_on_L1_9280);
+	INIT_INI_ARRAY(&ah->iniPcieSerdes,
+		       ar9280PciePhy_clkreq_always_on_L1_9280);
 
 	if (AR_SREV_9287_11_OR_LATER(ah)) {
 		INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index c486d0f8b3d3..954e2120d1be 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -446,7 +446,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 	ah->config.additional_swba_backoff = 0;
 	ah->config.ack_6mb = 0x0;
 	ah->config.cwm_ignore_extcca = 0;
-	ah->config.pcie_clock_req = 0;
 	ah->config.analog_shiftreg = 1;
 
 	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 3a7068236507..b8e2476c9d80 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -283,7 +283,6 @@ struct ath9k_ops_config {
 	int additional_swba_backoff;
 	int ack_6mb;
 	u32 cwm_ignore_extcca;
-	u8 pcie_clock_req;
 	u32 pcie_waen;
 	u8 analog_shiftreg;
 	u32 ofdm_trig_low;
-- 
cgit v1.2.3


From ae0c40314a86c5c942d32d9cbbc9f96d70839935 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:41 +0100
Subject: ath9k_hw: simplify spur channel handling

Remove ah->config.spurmode and ah->config.spurchans, always use EEPROM
data.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_phy.c  |  1 -
 drivers/net/wireless/ath/ath9k/eeprom_4k.c   | 26 +-------------------------
 drivers/net/wireless/ath/ath9k/eeprom_9287.c | 26 +-------------------------
 drivers/net/wireless/ath/ath9k/eeprom_def.c  | 26 +-------------------------
 drivers/net/wireless/ath/ath9k/hw.c          |  7 -------
 drivers/net/wireless/ath/ath9k/hw.h          |  5 -----
 6 files changed, 3 insertions(+), 88 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index f087117b2e6b..9a2afa2c690b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -201,7 +201,6 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah,
 	ath9k_hw_get_channel_centers(ah, chan, &centers);
 	freq = centers.synth_center;
 
-	ah->config.spurmode = SPUR_ENABLE_EEPROM;
 	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
 
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index b4091716e9b3..07b806c56c56 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -1085,31 +1085,7 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 
 static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
 {
-#define EEP_MAP4K_SPURCHAN \
-	(ah->eeprom.map4k.modalHeader.spurChans[i].spurChan)
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	u16 spur_val = AR_NO_SPUR;
-
-	ath_dbg(common, ANI, "Getting spur idx:%d is2Ghz:%d val:%x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
-
-	switch (ah->config.spurmode) {
-	case SPUR_DISABLE:
-		break;
-	case SPUR_ENABLE_IOCTL:
-		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_dbg(common, ANI, "Getting spur val from new loc. %d\n",
-			spur_val);
-		break;
-	case SPUR_ENABLE_EEPROM:
-		spur_val = EEP_MAP4K_SPURCHAN;
-		break;
-	}
-
-	return spur_val;
-
-#undef EEP_MAP4K_SPURCHAN
+	return ah->eeprom.map4k.modalHeader.spurChans[i].spurChan;
 }
 
 const struct eeprom_ops eep_4k_ops = {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index e1d0c217c104..5ba1385c9838 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -1004,31 +1004,7 @@ static void ath9k_hw_ar9287_set_board_values(struct ath_hw *ah,
 static u16 ath9k_hw_ar9287_get_spur_channel(struct ath_hw *ah,
 					    u16 i, bool is2GHz)
 {
-#define EEP_MAP9287_SPURCHAN \
-	(ah->eeprom.map9287.modalHeader.spurChans[i].spurChan)
-
-	struct ath_common *common = ath9k_hw_common(ah);
-	u16 spur_val = AR_NO_SPUR;
-
-	ath_dbg(common, ANI, "Getting spur idx:%d is2Ghz:%d val:%x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
-
-	switch (ah->config.spurmode) {
-	case SPUR_DISABLE:
-		break;
-	case SPUR_ENABLE_IOCTL:
-		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_dbg(common, ANI, "Getting spur val from new loc. %d\n",
-			spur_val);
-		break;
-	case SPUR_ENABLE_EEPROM:
-		spur_val = EEP_MAP9287_SPURCHAN;
-		break;
-	}
-
-	return spur_val;
-
-#undef EEP_MAP9287_SPURCHAN
+	return ah->eeprom.map9287.modalHeader.spurChans[i].spurChan;
 }
 
 const struct eeprom_ops eep_ar9287_ops = {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 39107e31e79a..3218ca994746 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -1348,31 +1348,7 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 
 static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
 {
-#define EEP_DEF_SPURCHAN \
-	(ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan)
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	u16 spur_val = AR_NO_SPUR;
-
-	ath_dbg(common, ANI, "Getting spur idx:%d is2Ghz:%d val:%x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
-
-	switch (ah->config.spurmode) {
-	case SPUR_DISABLE:
-		break;
-	case SPUR_ENABLE_IOCTL:
-		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_dbg(common, ANI, "Getting spur val from new loc. %d\n",
-			spur_val);
-		break;
-	case SPUR_ENABLE_EEPROM:
-		spur_val = EEP_DEF_SPURCHAN;
-		break;
-	}
-
-	return spur_val;
-
-#undef EEP_DEF_SPURCHAN
+	return ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan;
 }
 
 const struct eeprom_ops eep_def_ops = {
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 954e2120d1be..3e23abbcf084 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -439,8 +439,6 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 
 static void ath9k_hw_init_config(struct ath_hw *ah)
 {
-	int i;
-
 	ah->config.dma_beacon_response_time = 1;
 	ah->config.sw_beacon_response_time = 6;
 	ah->config.additional_swba_backoff = 0;
@@ -448,11 +446,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 	ah->config.cwm_ignore_extcca = 0;
 	ah->config.analog_shiftreg = 1;
 
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
-		ah->config.spurchans[i][0] = AR_NO_SPUR;
-		ah->config.spurchans[i][1] = AR_NO_SPUR;
-	}
-
 	ah->config.rx_intr_mitigation = true;
 
 	/*
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b8e2476c9d80..57d3d0c3a99f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -293,9 +293,6 @@ struct ath9k_ops_config {
 	int serialize_regmode;
 	bool rx_intr_mitigation;
 	bool tx_intr_mitigation;
-#define SPUR_DISABLE        	0
-#define SPUR_ENABLE_IOCTL   	1
-#define SPUR_ENABLE_EEPROM  	2
 #define AR_SPUR_5413_1      	1640
 #define AR_SPUR_5413_2      	1200
 #define AR_NO_SPUR      	0x8000
@@ -303,8 +300,6 @@ struct ath9k_ops_config {
 #define AR_BASE_FREQ_5GHZ   	4900
 #define AR_SPUR_FEEQ_BOUND_HT40 19
 #define AR_SPUR_FEEQ_BOUND_HT20 10
-	int spurmode;
-	u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
 	u8 max_txtrig_level;
 	u16 ani_poll_interval; /* ANI poll interval in ms */
 
-- 
cgit v1.2.3


From 49685634c6cb943ba9b35ff182ee479ca5b73302 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:42 +0100
Subject: ath9k_hw: remove additional_swba_backoff

It is unused

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c  | 1 -
 drivers/net/wireless/ath/ath9k/hw.h  | 1 -
 drivers/net/wireless/ath/ath9k/mac.c | 3 +--
 3 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3e23abbcf084..073346abc3f0 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -441,7 +441,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 {
 	ah->config.dma_beacon_response_time = 1;
 	ah->config.sw_beacon_response_time = 6;
-	ah->config.additional_swba_backoff = 0;
 	ah->config.ack_6mb = 0x0;
 	ah->config.cwm_ignore_extcca = 0;
 	ah->config.analog_shiftreg = 1;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 57d3d0c3a99f..2ef9d2472a96 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -280,7 +280,6 @@ struct ath9k_hw_capabilities {
 struct ath9k_ops_config {
 	int dma_beacon_response_time;
 	int sw_beacon_response_time;
-	int additional_swba_backoff;
 	int ack_6mb;
 	u32 cwm_ignore_extcca;
 	u32 pcie_waen;
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index a8504822b4fd..89d7e206992b 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -481,8 +481,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 			    | AR_Q_MISC_CBR_INCR_DIS0);
 		value = (qi->tqi_readyTime -
 			 (ah->config.sw_beacon_response_time -
-			  ah->config.dma_beacon_response_time) -
-			 ah->config.additional_swba_backoff) * 1024;
+			  ah->config.dma_beacon_response_time)) * 1024;
 		REG_WRITE(ah, AR_QRDYTIMECFG(q),
 			  value | AR_Q_RDYTIMECFG_EN);
 		REG_SET_BIT(ah, AR_DMISC(q),
-- 
cgit v1.2.3


From c57b182b9fb7cc731f3d6620f86b43ce5ee702d2 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:43 +0100
Subject: ath9k_hw: remove spur related unused defines

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 2ef9d2472a96..4e3b73b62939 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -292,8 +292,6 @@ struct ath9k_ops_config {
 	int serialize_regmode;
 	bool rx_intr_mitigation;
 	bool tx_intr_mitigation;
-#define AR_SPUR_5413_1      	1640
-#define AR_SPUR_5413_2      	1200
 #define AR_NO_SPUR      	0x8000
 #define AR_BASE_FREQ_2GHZ   	2300
 #define AR_BASE_FREQ_5GHZ   	4900
-- 
cgit v1.2.3


From 4ed15762dce67192d4662860470a8be1f6d5fd53 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:44 +0100
Subject: ath9k_hw: clean up station beacon timer API

Remove unused fields, pass timer info in usec instead of TU.
Preparation for fixing nexttbtt calculation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c         | 38 +++++++-----------------
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 39 ++++++++-----------------
 drivers/net/wireless/ath/ath9k/hw.c             | 18 +++++-------
 drivers/net/wireless/ath/ath9k/hw.h             |  6 +---
 4 files changed, 31 insertions(+), 70 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 17be35392bb4..5128856d77d2 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -476,10 +476,9 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_beacon_state bs;
 	int dtimperiod, dtimcount, sleepduration;
-	int cfpperiod, cfpcount;
 	u32 nexttbtt = 0, intval, tsftu;
 	u64 tsf;
-	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
+	int num_beacons, offset, dtim_dec_count;
 
 	/* No need to configure beacon if we are not associated */
 	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
@@ -492,21 +491,19 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	intval = conf->beacon_interval;
 
 	/*
-	 * Setup dtim and cfp parameters according to
+	 * Setup dtim parameters according to
 	 * last beacon we received (which may be none).
 	 */
 	dtimperiod = conf->dtim_period;
 	dtimcount = conf->dtim_count;
 	if (dtimcount >= dtimperiod)	/* NB: sanity check */
 		dtimcount = 0;
-	cfpperiod = 1;			/* NB: no PCF support yet */
-	cfpcount = 0;
 
 	sleepduration = conf->listen_interval * intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
-	 * TSF and calculate dtim+cfp state for the result.
+	 * TSF and calculate dtim state for the result.
 	 */
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
@@ -519,26 +516,14 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 
 	/* DTIM Beacon every dtimperiod Beacon */
 	dtim_dec_count = num_beacons % dtimperiod;
-	/* CFP every cfpperiod DTIM Beacon */
-	cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod;
-	if (dtim_dec_count)
-		cfp_dec_count++;
-
 	dtimcount -= dtim_dec_count;
 	if (dtimcount < 0)
 		dtimcount += dtimperiod;
 
-	cfpcount -= cfp_dec_count;
-	if (cfpcount < 0)
-		cfpcount += cfpperiod;
-
-	bs.bs_intval = intval;
-	bs.bs_nexttbtt = nexttbtt;
-	bs.bs_dtimperiod = dtimperiod*intval;
-	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
-	bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
-	bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
-	bs.bs_cfpmaxduration = 0;
+	bs.bs_intval = TU_TO_USEC(intval);
+	bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
+	bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
+	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
 
 	/*
 	 * Calculate the number of consecutive beacons to miss* before taking
@@ -566,7 +551,8 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 * XXX fixed at 100ms
 	 */
 
-	bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
+						 sleepduration));
 	if (bs.bs_sleepduration > bs.bs_dtimperiod)
 		bs.bs_sleepduration = bs.bs_dtimperiod;
 
@@ -574,10 +560,8 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
 	ath_dbg(common, BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
-	ath_dbg(common, BEACON,
-		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration,
-		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
+		bs.bs_bmissthreshold, bs.bs_sleepduration);
 
 	/* Set the computed STA beacon timers */
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index e0c03bd64182..8b5757734596 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -70,11 +70,11 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	struct ath9k_beacon_state bs;
 	enum ath9k_int imask = 0;
 	int dtimperiod, dtimcount, sleepduration;
-	int cfpperiod, cfpcount, bmiss_timeout;
+	int bmiss_timeout;
 	u32 nexttbtt = 0, intval, tsftu;
 	__be32 htc_imask = 0;
 	u64 tsf;
-	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
+	int num_beacons, offset, dtim_dec_count;
 	int ret __attribute__ ((unused));
 	u8 cmd_rsp;
 
@@ -84,7 +84,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
 
 	/*
-	 * Setup dtim and cfp parameters according to
+	 * Setup dtim parameters according to
 	 * last beacon we received (which may be none).
 	 */
 	dtimperiod = bss_conf->dtim_period;
@@ -93,8 +93,6 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	dtimcount = 1;
 	if (dtimcount >= dtimperiod)	/* NB: sanity check */
 		dtimcount = 0;
-	cfpperiod = 1;			/* NB: no PCF support yet */
-	cfpcount = 0;
 
 	sleepduration = intval;
 	if (sleepduration <= 0)
@@ -102,7 +100,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
-	 * TSF and calculate dtim+cfp state for the result.
+	 * TSF and calculate dtim state for the result.
 	 */
 	tsf = ath9k_hw_gettsf64(priv->ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
@@ -115,26 +113,14 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 
 	/* DTIM Beacon every dtimperiod Beacon */
 	dtim_dec_count = num_beacons % dtimperiod;
-	/* CFP every cfpperiod DTIM Beacon */
-	cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod;
-	if (dtim_dec_count)
-		cfp_dec_count++;
-
 	dtimcount -= dtim_dec_count;
 	if (dtimcount < 0)
 		dtimcount += dtimperiod;
 
-	cfpcount -= cfp_dec_count;
-	if (cfpcount < 0)
-		cfpcount += cfpperiod;
-
-	bs.bs_intval = intval;
-	bs.bs_nexttbtt = nexttbtt;
-	bs.bs_dtimperiod = dtimperiod*intval;
-	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
-	bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
-	bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
-	bs.bs_cfpmaxduration = 0;
+	bs.bs_intval = TU_TO_USEC(intval);
+	bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
+	bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
+	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
 
 	/*
 	 * Calculate the number of consecutive beacons to miss* before taking
@@ -161,7 +147,8 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	 * XXX fixed at 100ms
 	 */
 
-	bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+	bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
+						 sleepduration));
 	if (bs.bs_sleepduration > bs.bs_dtimperiod)
 		bs.bs_sleepduration = bs.bs_dtimperiod;
 
@@ -170,10 +157,8 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 
 	ath_dbg(common, CONFIG, "intval: %u tsf: %llu tsftu: %u\n",
 		intval, tsf, tsftu);
-	ath_dbg(common, CONFIG,
-		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration,
-		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_dbg(common, CONFIG, "bmiss: %u sleep: %u\n",
+		bs.bs_bmissthreshold, bs.bs_sleepduration);
 
 	/* Set the computed STA beacon timers */
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 073346abc3f0..2318bb90cd63 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2292,12 +2292,9 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
-	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
-
-	REG_WRITE(ah, AR_BEACON_PERIOD,
-		  TU_TO_USEC(bs->bs_intval));
-	REG_WRITE(ah, AR_DMA_BEACON_PERIOD,
-		  TU_TO_USEC(bs->bs_intval));
+	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, bs->bs_nexttbtt);
+	REG_WRITE(ah, AR_BEACON_PERIOD, bs->bs_intval);
+	REG_WRITE(ah, AR_DMA_BEACON_PERIOD, bs->bs_intval);
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
@@ -2325,9 +2322,8 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
-	REG_WRITE(ah, AR_NEXT_DTIM,
-		  TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP));
-	REG_WRITE(ah, AR_NEXT_TIM, TU_TO_USEC(nextTbtt - SLEEP_SLOP));
+	REG_WRITE(ah, AR_NEXT_DTIM, bs->bs_nextdtim - SLEEP_SLOP);
+	REG_WRITE(ah, AR_NEXT_TIM, nextTbtt - SLEEP_SLOP);
 
 	REG_WRITE(ah, AR_SLEEP1,
 		  SM((CAB_TIMEOUT_VAL << 3), AR_SLEEP1_CAB_TIMEOUT)
@@ -2341,8 +2337,8 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 	REG_WRITE(ah, AR_SLEEP2,
 		  SM(beacontimeout, AR_SLEEP2_BEACON_TIMEOUT));
 
-	REG_WRITE(ah, AR_TIM_PERIOD, TU_TO_USEC(beaconintval));
-	REG_WRITE(ah, AR_DTIM_PERIOD, TU_TO_USEC(dtimperiod));
+	REG_WRITE(ah, AR_TIM_PERIOD, beaconintval);
+	REG_WRITE(ah, AR_DTIM_PERIOD, dtimperiod);
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 4e3b73b62939..54932d8b5edd 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -168,7 +168,7 @@
 #define CAB_TIMEOUT_VAL             10
 #define BEACON_TIMEOUT_VAL          10
 #define MIN_BEACON_TIMEOUT_VAL      1
-#define SLEEP_SLOP                  3
+#define SLEEP_SLOP                  TU_TO_USEC(3)
 
 #define INIT_CONFIG_STATUS          0x00000000
 #define INIT_RSSI_THR               0x00000700
@@ -451,10 +451,6 @@ struct ath9k_beacon_state {
 	u32 bs_intval;
 #define ATH9K_TSFOOR_THRESHOLD    0x00004240 /* 16k us */
 	u32 bs_dtimperiod;
-	u16 bs_cfpperiod;
-	u16 bs_cfpmaxduration;
-	u32 bs_cfpnext;
-	u16 bs_timoffset;
 	u16 bs_bmissthreshold;
 	u32 bs_sleepduration;
 	u32 bs_tsfoor_threshold;
-- 
cgit v1.2.3


From a35051ce1733f524c12a8246641ded5d0409817d Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Sat, 14 Dec 2013 18:03:45 +0100
Subject: ath9k: properly preserve TSF across reset

The beacon code previously reset TSF on every configuration call, as
some of the code was not prepared to properly calculate nexttbtt based
on current TSF.

This patch adds a common function for calculating nexttbtt and moves the
TSF reset to driver start.

This should improve AP mode compatibility with various stations that
expect the TSF to not randomly jump due to hardware resets.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 88 ++++++++++++++++-----------------
 drivers/net/wireless/ath/ath9k/main.c   |  2 +
 2 files changed, 45 insertions(+), 45 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 5128856d77d2..78ffe762e26c 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -431,6 +431,33 @@ static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt,
 	ath9k_hw_enable_interrupts(ah);
 }
 
+/* Calculate the modulo of a 64 bit TSF snapshot with a TU divisor */
+static u32 ath9k_mod_tsf64_tu(u64 tsf, u32 div_tu)
+{
+	u32 tsf_mod, tsf_hi, tsf_lo, mod_hi, mod_lo;
+
+	tsf_mod = tsf & (BIT(10) - 1);
+	tsf_hi = tsf >> 32;
+	tsf_lo = ((u32) tsf) >> 10;
+
+	mod_hi = tsf_hi % div_tu;
+	mod_lo = ((mod_hi << 22) + tsf_lo) % div_tu;
+
+	return (mod_lo << 10) | tsf_mod;
+}
+
+static u32 ath9k_get_next_tbtt(struct ath_softc *sc, u64 tsf,
+			       unsigned int interval)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	unsigned int offset;
+
+	tsf += TU_TO_USEC(FUDGE + ah->config.sw_beacon_response_time);
+	offset = ath9k_mod_tsf64_tu(tsf, interval);
+
+	return (u32) tsf + TU_TO_USEC(interval) - offset;
+}
+
 /*
  * For multi-bss ap support beacons are either staggered evenly over N slots or
  * burst together.  For the former arrange for the SWBA to be delivered for each
@@ -446,7 +473,8 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc,
 	/* NB: the beacon interval is kept internally in TU's */
 	intval = TU_TO_USEC(conf->beacon_interval);
 	intval /= ATH_BCBUF;
-	nexttbtt = intval;
+	nexttbtt = ath9k_get_next_tbtt(sc, ath9k_hw_gettsf64(ah),
+				       conf->beacon_interval);
 
 	if (conf->enable_beacon)
 		ah->imask |= ATH9K_INT_SWBA;
@@ -458,7 +486,7 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc,
 		(conf->enable_beacon) ? "Enable" : "Disable",
 		nexttbtt, intval, conf->beacon_interval);
 
-	ath9k_beacon_init(sc, nexttbtt, intval, true);
+	ath9k_beacon_init(sc, nexttbtt, intval, false);
 }
 
 /*
@@ -475,10 +503,9 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_beacon_state bs;
-	int dtimperiod, dtimcount, sleepduration;
-	u32 nexttbtt = 0, intval, tsftu;
+	int dtim_intval, sleepduration;
+	u32 nexttbtt = 0, intval;
 	u64 tsf;
-	int num_beacons, offset, dtim_dec_count;
 
 	/* No need to configure beacon if we are not associated */
 	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
@@ -494,11 +521,7 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 * Setup dtim parameters according to
 	 * last beacon we received (which may be none).
 	 */
-	dtimperiod = conf->dtim_period;
-	dtimcount = conf->dtim_count;
-	if (dtimcount >= dtimperiod)	/* NB: sanity check */
-		dtimcount = 0;
-
+	dtim_intval = intval * conf->dtim_period;
 	sleepduration = conf->listen_interval * intval;
 
 	/*
@@ -506,24 +529,14 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	 * TSF and calculate dtim state for the result.
 	 */
 	tsf = ath9k_hw_gettsf64(ah);
-	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
-
-	num_beacons = tsftu / intval + 1;
-	offset = tsftu % intval;
-	nexttbtt = tsftu - offset;
-	if (offset)
-		nexttbtt += intval;
-
-	/* DTIM Beacon every dtimperiod Beacon */
-	dtim_dec_count = num_beacons % dtimperiod;
-	dtimcount -= dtim_dec_count;
-	if (dtimcount < 0)
-		dtimcount += dtimperiod;
+	nexttbtt = ath9k_get_next_tbtt(sc, tsf, intval);
 
 	bs.bs_intval = TU_TO_USEC(intval);
-	bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
-	bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
-	bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
+	bs.bs_dtimperiod = conf->dtim_period * bs.bs_intval;
+	bs.bs_nexttbtt = nexttbtt;
+	bs.bs_nextdtim = nexttbtt;
+	if (conf->dtim_period > 1)
+		bs.bs_nextdtim = ath9k_get_next_tbtt(sc, tsf, dtim_intval);
 
 	/*
 	 * Calculate the number of consecutive beacons to miss* before taking
@@ -559,7 +572,6 @@ static void ath9k_beacon_config_sta(struct ath_softc *sc,
 	/* TSF out of range threshold fixed at 1 second */
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
-	ath_dbg(common, BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
 	ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
 		bs.bs_bmissthreshold, bs.bs_sleepduration);
 
@@ -584,25 +596,11 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
 
 	intval = TU_TO_USEC(conf->beacon_interval);
 
-	if (conf->ibss_creator) {
+	if (conf->ibss_creator)
 		nexttbtt = intval;
-	} else {
-		u32 tbtt, offset, tsftu;
-		u64 tsf;
-
-		/*
-		 * Pull nexttbtt forward to reflect the current
-		 * sync'd TSF.
-		 */
-		tsf = ath9k_hw_gettsf64(ah);
-		tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE;
-		offset = tsftu % conf->beacon_interval;
-		tbtt = tsftu - offset;
-		if (offset)
-			tbtt += conf->beacon_interval;
-
-		nexttbtt = TU_TO_USEC(tbtt);
-	}
+	else
+		nexttbtt = ath9k_get_next_tbtt(sc, ath9k_hw_gettsf64(ah),
+					       conf->beacon_interval);
 
 	if (conf->enable_beacon)
 		ah->imask |= ATH9K_INT_SWBA;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 4798f6ae061e..6a231201c7dc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -760,6 +760,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 */
 	ath9k_cmn_init_crypto(sc->sc_ah);
 
+	ath9k_hw_reset_tsf(ah);
+
 	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	mutex_unlock(&sc->mutex);
-- 
cgit v1.2.3


From f65c0825512b7b8ed6cc6e43bb46ca2c758d9ae4 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:18 +0530
Subject: ath9k: Cleanup spectral scan code

* Move definitions to spectral.h
* Move processing/debug code to spectral.c

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Makefile   |   4 +-
 drivers/net/wireless/ath/ath9k/ath9k.h    | 179 +---------
 drivers/net/wireless/ath/ath9k/debug.c    | 311 +----------------
 drivers/net/wireless/ath/ath9k/debug.h    |   2 -
 drivers/net/wireless/ath/ath9k/recv.c     | 181 ----------
 drivers/net/wireless/ath/ath9k/spectral.c | 543 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/spectral.h | 212 ++++++++++++
 7 files changed, 761 insertions(+), 671 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/spectral.c
 create mode 100644 drivers/net/wireless/ath/ath9k/spectral.h

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 337c459eda28..e9904e5ccd81 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -11,12 +11,14 @@ ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
 ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
-ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
 ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
 ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
 ath9k-$(CONFIG_ATH9K_TX99) += tx99.o
 ath9k-$(CONFIG_ATH9K_WOW) += wow.o
 
+ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o \
+				 spectral.o
+
 obj-$(CONFIG_ATH9K) += ath9k.o
 
 ath9k_hw-y:=	\
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index dbf2a97d4daa..55bb87400b1a 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -27,6 +27,7 @@
 #include "common.h"
 #include "mci.h"
 #include "dfs.h"
+#include "spectral.h"
 
 /*
  * Header for the ath9k.ko driver core *only* -- hw code nor any other driver
@@ -716,23 +717,6 @@ struct ath9k_vif_iter_data {
 	int nadhocs;   /* number of adhoc vifs */
 };
 
-/* enum spectral_mode:
- *
- * @SPECTRAL_DISABLED: spectral mode is disabled
- * @SPECTRAL_BACKGROUND: hardware sends samples when it is not busy with
- *	something else.
- * @SPECTRAL_MANUAL: spectral scan is enabled, triggering for samples
- *	is performed manually.
- * @SPECTRAL_CHANSCAN: Like manual, but also triggered when changing channels
- *	during a channel scan.
- */
-enum spectral_mode {
-	SPECTRAL_DISABLED = 0,
-	SPECTRAL_BACKGROUND,
-	SPECTRAL_MANUAL,
-	SPECTRAL_CHANSCAN,
-};
-
 struct ath_softc {
 	struct ieee80211_hw *hw;
 	struct device *dev;
@@ -822,162 +806,6 @@ struct ath_softc {
 #endif
 };
 
-#define SPECTRAL_SCAN_BITMASK		0x10
-/* Radar info packet format, used for DFS and spectral formats. */
-struct ath_radar_info {
-	u8 pulse_length_pri;
-	u8 pulse_length_ext;
-	u8 pulse_bw_info;
-} __packed;
-
-/* The HT20 spectral data has 4 bytes of additional information at it's end.
- *
- * [7:0]: all bins {max_magnitude[1:0], bitmap_weight[5:0]}
- * [7:0]: all bins  max_magnitude[9:2]
- * [7:0]: all bins {max_index[5:0], max_magnitude[11:10]}
- * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned)
- */
-struct ath_ht20_mag_info {
-	u8 all_bins[3];
-	u8 max_exp;
-} __packed;
-
-#define SPECTRAL_HT20_NUM_BINS		56
-
-/* WARNING: don't actually use this struct! MAC may vary the amount of
- * data by -1/+2. This struct is for reference only.
- */
-struct ath_ht20_fft_packet {
-	u8 data[SPECTRAL_HT20_NUM_BINS];
-	struct ath_ht20_mag_info mag_info;
-	struct ath_radar_info radar_info;
-} __packed;
-
-#define SPECTRAL_HT20_TOTAL_DATA_LEN	(sizeof(struct ath_ht20_fft_packet))
-
-/* Dynamic 20/40 mode:
- *
- * [7:0]: lower bins {max_magnitude[1:0], bitmap_weight[5:0]}
- * [7:0]: lower bins  max_magnitude[9:2]
- * [7:0]: lower bins {max_index[5:0], max_magnitude[11:10]}
- * [7:0]: upper bins {max_magnitude[1:0], bitmap_weight[5:0]}
- * [7:0]: upper bins  max_magnitude[9:2]
- * [7:0]: upper bins {max_index[5:0], max_magnitude[11:10]}
- * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned)
- */
-struct ath_ht20_40_mag_info {
-	u8 lower_bins[3];
-	u8 upper_bins[3];
-	u8 max_exp;
-} __packed;
-
-#define SPECTRAL_HT20_40_NUM_BINS		128
-
-/* WARNING: don't actually use this struct! MAC may vary the amount of
- * data. This struct is for reference only.
- */
-struct ath_ht20_40_fft_packet {
-	u8 data[SPECTRAL_HT20_40_NUM_BINS];
-	struct ath_ht20_40_mag_info mag_info;
-	struct ath_radar_info radar_info;
-} __packed;
-
-
-#define SPECTRAL_HT20_40_TOTAL_DATA_LEN	(sizeof(struct ath_ht20_40_fft_packet))
-
-/* grabs the max magnitude from the all/upper/lower bins */
-static inline u16 spectral_max_magnitude(u8 *bins)
-{
-	return (bins[0] & 0xc0) >> 6 |
-	       (bins[1] & 0xff) << 2 |
-	       (bins[2] & 0x03) << 10;
-}
-
-/* return the max magnitude from the all/upper/lower bins */
-static inline u8 spectral_max_index(u8 *bins)
-{
-	s8 m = (bins[2] & 0xfc) >> 2;
-
-	/* TODO: this still doesn't always report the right values ... */
-	if (m > 32)
-		m |= 0xe0;
-	else
-		m &= ~0xe0;
-
-	return m + 29;
-}
-
-/* return the bitmap weight from the all/upper/lower bins */
-static inline u8 spectral_bitmap_weight(u8 *bins)
-{
-	return bins[0] & 0x3f;
-}
-
-/* FFT sample format given to userspace via debugfs.
- *
- * Please keep the type/length at the front position and change
- * other fields after adding another sample type
- *
- * TODO: this might need rework when switching to nl80211-based
- * interface.
- */
-enum ath_fft_sample_type {
-	ATH_FFT_SAMPLE_HT20 = 1,
-	ATH_FFT_SAMPLE_HT20_40,
-};
-
-struct fft_sample_tlv {
-	u8 type;	/* see ath_fft_sample */
-	__be16 length;
-	/* type dependent data follows */
-} __packed;
-
-struct fft_sample_ht20 {
-	struct fft_sample_tlv tlv;
-
-	u8 max_exp;
-
-	__be16 freq;
-	s8 rssi;
-	s8 noise;
-
-	__be16 max_magnitude;
-	u8 max_index;
-	u8 bitmap_weight;
-
-	__be64 tsf;
-
-	u8 data[SPECTRAL_HT20_NUM_BINS];
-} __packed;
-
-struct fft_sample_ht20_40 {
-	struct fft_sample_tlv tlv;
-
-	u8 channel_type;
-	__be16 freq;
-
-	s8 lower_rssi;
-	s8 upper_rssi;
-
-	__be64 tsf;
-
-	s8 lower_noise;
-	s8 upper_noise;
-
-	__be16 lower_max_magnitude;
-	__be16 upper_max_magnitude;
-
-	u8 lower_max_index;
-	u8 upper_max_index;
-
-	u8 lower_bitmap_weight;
-	u8 upper_bitmap_weight;
-
-	u8 max_exp;
-
-	u8 data[SPECTRAL_HT20_40_NUM_BINS];
-} __packed;
-
 /********/
 /* TX99 */
 /********/
@@ -1022,11 +850,6 @@ void ath9k_deinit_device(struct ath_softc *sc);
 void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath9k_reload_chainmask_settings(struct ath_softc *sc);
 
-void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw);
-int ath9k_spectral_scan_config(struct ieee80211_hw *hw,
-			       enum spectral_mode spectral_mode);
-
-
 #ifdef CONFIG_ATH9K_PCI
 int ath_pci_init(void);
 void ath_pci_exit(void);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 2f7dccfdb727..4c6f8b107ed6 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/export.h>
-#include <linux/relay.h>
 #include <asm/unaligned.h>
 
 #include "ath9k.h"
@@ -1016,293 +1015,6 @@ static const struct file_operations fops_recv = {
 	.llseek = default_llseek,
 };
 
-static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf,
-				       size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char *mode = "";
-	unsigned int len;
-
-	switch (sc->spectral_mode) {
-	case SPECTRAL_DISABLED:
-		mode = "disable";
-		break;
-	case SPECTRAL_BACKGROUND:
-		mode = "background";
-		break;
-	case SPECTRAL_CHANSCAN:
-		mode = "chanscan";
-		break;
-	case SPECTRAL_MANUAL:
-		mode = "manual";
-		break;
-	}
-	len = strlen(mode);
-	return simple_read_from_buffer(user_buf, count, ppos, mode, len);
-}
-
-static ssize_t write_file_spec_scan_ctl(struct file *file,
-					const char __user *user_buf,
-					size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	char buf[32];
-	ssize_t len;
-
-	if (config_enabled(CONFIG_ATH9K_TX99))
-		return -EOPNOTSUPP;
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len))
-		return -EFAULT;
-
-	buf[len] = '\0';
-
-	if (strncmp("trigger", buf, 7) == 0) {
-		ath9k_spectral_scan_trigger(sc->hw);
-	} else if (strncmp("background", buf, 9) == 0) {
-		ath9k_spectral_scan_config(sc->hw, SPECTRAL_BACKGROUND);
-		ath_dbg(common, CONFIG, "spectral scan: background mode enabled\n");
-	} else if (strncmp("chanscan", buf, 8) == 0) {
-		ath9k_spectral_scan_config(sc->hw, SPECTRAL_CHANSCAN);
-		ath_dbg(common, CONFIG, "spectral scan: channel scan mode enabled\n");
-	} else if (strncmp("manual", buf, 6) == 0) {
-		ath9k_spectral_scan_config(sc->hw, SPECTRAL_MANUAL);
-		ath_dbg(common, CONFIG, "spectral scan: manual mode enabled\n");
-	} else if (strncmp("disable", buf, 7) == 0) {
-		ath9k_spectral_scan_config(sc->hw, SPECTRAL_DISABLED);
-		ath_dbg(common, CONFIG, "spectral scan: disabled\n");
-	} else {
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations fops_spec_scan_ctl = {
-	.read = read_file_spec_scan_ctl,
-	.write = write_file_spec_scan_ctl,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-static ssize_t read_file_spectral_short_repeat(struct file *file,
-					       char __user *user_buf,
-					       size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[32];
-	unsigned int len;
-
-	len = sprintf(buf, "%d\n", sc->spec_config.short_repeat);
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_spectral_short_repeat(struct file *file,
-						const char __user *user_buf,
-						size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	unsigned long val;
-	char buf[32];
-	ssize_t len;
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len))
-		return -EFAULT;
-
-	buf[len] = '\0';
-	if (kstrtoul(buf, 0, &val))
-		return -EINVAL;
-
-	if (val < 0 || val > 1)
-		return -EINVAL;
-
-	sc->spec_config.short_repeat = val;
-	return count;
-}
-
-static const struct file_operations fops_spectral_short_repeat = {
-	.read = read_file_spectral_short_repeat,
-	.write = write_file_spectral_short_repeat,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-static ssize_t read_file_spectral_count(struct file *file,
-					char __user *user_buf,
-					size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[32];
-	unsigned int len;
-
-	len = sprintf(buf, "%d\n", sc->spec_config.count);
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_spectral_count(struct file *file,
-					 const char __user *user_buf,
-					 size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	unsigned long val;
-	char buf[32];
-	ssize_t len;
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len))
-		return -EFAULT;
-
-	buf[len] = '\0';
-	if (kstrtoul(buf, 0, &val))
-		return -EINVAL;
-
-	if (val < 0 || val > 255)
-		return -EINVAL;
-
-	sc->spec_config.count = val;
-	return count;
-}
-
-static const struct file_operations fops_spectral_count = {
-	.read = read_file_spectral_count,
-	.write = write_file_spectral_count,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-static ssize_t read_file_spectral_period(struct file *file,
-					 char __user *user_buf,
-					 size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[32];
-	unsigned int len;
-
-	len = sprintf(buf, "%d\n", sc->spec_config.period);
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_spectral_period(struct file *file,
-					  const char __user *user_buf,
-					  size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	unsigned long val;
-	char buf[32];
-	ssize_t len;
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len))
-		return -EFAULT;
-
-	buf[len] = '\0';
-	if (kstrtoul(buf, 0, &val))
-		return -EINVAL;
-
-	if (val < 0 || val > 255)
-		return -EINVAL;
-
-	sc->spec_config.period = val;
-	return count;
-}
-
-static const struct file_operations fops_spectral_period = {
-	.read = read_file_spectral_period,
-	.write = write_file_spectral_period,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-static ssize_t read_file_spectral_fft_period(struct file *file,
-					     char __user *user_buf,
-					     size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[32];
-	unsigned int len;
-
-	len = sprintf(buf, "%d\n", sc->spec_config.fft_period);
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t write_file_spectral_fft_period(struct file *file,
-					      const char __user *user_buf,
-					      size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	unsigned long val;
-	char buf[32];
-	ssize_t len;
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len))
-		return -EFAULT;
-
-	buf[len] = '\0';
-	if (kstrtoul(buf, 0, &val))
-		return -EINVAL;
-
-	if (val < 0 || val > 15)
-		return -EINVAL;
-
-	sc->spec_config.fft_period = val;
-	return count;
-}
-
-static const struct file_operations fops_spectral_fft_period = {
-	.read = read_file_spectral_fft_period,
-	.write = write_file_spectral_fft_period,
-	.open = simple_open,
-	.owner = THIS_MODULE,
-	.llseek = default_llseek,
-};
-
-static struct dentry *create_buf_file_handler(const char *filename,
-					      struct dentry *parent,
-					      umode_t mode,
-					      struct rchan_buf *buf,
-					      int *is_global)
-{
-	struct dentry *buf_file;
-
-	buf_file = debugfs_create_file(filename, mode, parent, buf,
-				       &relay_file_operations);
-	*is_global = 1;
-	return buf_file;
-}
-
-static int remove_buf_file_handler(struct dentry *dentry)
-{
-	debugfs_remove(dentry);
-
-	return 0;
-}
-
-void ath_debug_send_fft_sample(struct ath_softc *sc,
-			       struct fft_sample_tlv *fft_sample_tlv)
-{
-	int length;
-	if (!sc->rfs_chan_spec_scan)
-		return;
-
-	length = __be16_to_cpu(fft_sample_tlv->length) +
-		 sizeof(*fft_sample_tlv);
-	relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, length);
-}
-
-static struct rchan_callbacks rfs_spec_scan_cb = {
-	.create_buf_file = create_buf_file_handler,
-	.remove_buf_file = remove_buf_file_handler,
-};
-
-
 static ssize_t read_file_regidx(struct file *file, char __user *user_buf,
                                 size_t count, loff_t *ppos)
 {
@@ -1772,10 +1484,7 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw,
 
 void ath9k_deinit_debug(struct ath_softc *sc)
 {
-	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
-		relay_close(sc->rfs_chan_spec_scan);
-		sc->rfs_chan_spec_scan = NULL;
-	}
+	ath9k_spectral_deinit_debug(sc);
 }
 
 int ath9k_init_debug(struct ath_hw *ah)
@@ -1795,6 +1504,7 @@ int ath9k_init_debug(struct ath_hw *ah)
 
 	ath9k_dfs_init_debug(sc);
 	ath9k_tx99_init_debug(sc);
+	ath9k_spectral_init_debug(sc);
 
 	debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy, sc,
 			    &fops_dma);
@@ -1841,23 +1551,6 @@ int ath9k_init_debug(struct ath_hw *ah)
 			    &fops_base_eeprom);
 	debugfs_create_file("modal_eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
 			    &fops_modal_eeprom);
-	sc->rfs_chan_spec_scan = relay_open("spectral_scan",
-					    sc->debug.debugfs_phy,
-					    1024, 256, &rfs_spec_scan_cb,
-					    NULL);
-	debugfs_create_file("spectral_scan_ctl", S_IRUSR | S_IWUSR,
-			    sc->debug.debugfs_phy, sc,
-			    &fops_spec_scan_ctl);
-	debugfs_create_file("spectral_short_repeat", S_IRUSR | S_IWUSR,
-			    sc->debug.debugfs_phy, sc,
-			    &fops_spectral_short_repeat);
-	debugfs_create_file("spectral_count", S_IRUSR | S_IWUSR,
-			    sc->debug.debugfs_phy, sc, &fops_spectral_count);
-	debugfs_create_file("spectral_period", S_IRUSR | S_IWUSR,
-			    sc->debug.debugfs_phy, sc, &fops_spectral_period);
-	debugfs_create_file("spectral_fft_period", S_IRUSR | S_IWUSR,
-			    sc->debug.debugfs_phy, sc,
-			    &fops_spectral_fft_period);
 	debugfs_create_u32("gpio_mask", S_IRUSR | S_IWUSR,
 			   sc->debug.debugfs_phy, &sc->sc_ah->gpio_mask);
 	debugfs_create_u32("gpio_val", S_IRUSR | S_IWUSR,
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index d6e3fa4299a4..4f596ddeb15d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -292,8 +292,6 @@ void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
 			   struct ieee80211_vif *vif,
 			   struct ieee80211_sta *sta,
 			   struct dentry *dir);
-void ath_debug_send_fft_sample(struct ath_softc *sc,
-			       struct fft_sample_tlv *fft_sample);
 void ath9k_debug_stat_ant(struct ath_softc *sc,
 			  struct ath_hw_antcomb_conf *div_ant_conf,
 			  int main_rssi_avg, int alt_rssi_avg);
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 2410224b6def..3692b2a501a2 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/dma-mapping.h>
-#include <linux/relay.h>
 #include "ath9k.h"
 #include "ar9003_mac.h"
 
@@ -975,186 +974,6 @@ static void ath9k_process_tsf(struct ath_rx_status *rs,
 		rxs->mactime += 0x100000000ULL;
 }
 
-#ifdef CONFIG_ATH9K_DEBUGFS
-static s8 fix_rssi_inv_only(u8 rssi_val)
-{
-	if (rssi_val == 128)
-		rssi_val = 0;
-	return (s8) rssi_val;
-}
-#endif
-
-/* returns 1 if this was a spectral frame, even if not handled. */
-static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
-			   struct ath_rx_status *rs, u64 tsf)
-{
-#ifdef CONFIG_ATH9K_DEBUGFS
-	struct ath_hw *ah = sc->sc_ah;
-	u8 num_bins, *bins, *vdata = (u8 *)hdr;
-	struct fft_sample_ht20 fft_sample_20;
-	struct fft_sample_ht20_40 fft_sample_40;
-	struct fft_sample_tlv *tlv;
-	struct ath_radar_info *radar_info;
-	int len = rs->rs_datalen;
-	int dc_pos;
-	u16 fft_len, length, freq = ah->curchan->chan->center_freq;
-	enum nl80211_channel_type chan_type;
-
-	/* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
-	 * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
-	 * yet, but this is supposed to be possible as well.
-	 */
-	if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
-	    rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
-	    rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
-		return 0;
-
-	/* check if spectral scan bit is set. This does not have to be checked
-	 * if received through a SPECTRAL phy error, but shouldn't hurt.
-	 */
-	radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
-	if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
-		return 0;
-
-	chan_type = cfg80211_get_chandef_type(&sc->hw->conf.chandef);
-	if ((chan_type == NL80211_CHAN_HT40MINUS) ||
-	    (chan_type == NL80211_CHAN_HT40PLUS)) {
-		fft_len = SPECTRAL_HT20_40_TOTAL_DATA_LEN;
-		num_bins = SPECTRAL_HT20_40_NUM_BINS;
-		bins = (u8 *)fft_sample_40.data;
-	} else {
-		fft_len = SPECTRAL_HT20_TOTAL_DATA_LEN;
-		num_bins = SPECTRAL_HT20_NUM_BINS;
-		bins = (u8 *)fft_sample_20.data;
-	}
-
-	/* Variation in the data length is possible and will be fixed later */
-	if ((len > fft_len + 2) || (len < fft_len - 1))
-		return 1;
-
-	switch (len - fft_len) {
-	case 0:
-		/* length correct, nothing to do. */
-		memcpy(bins, vdata, num_bins);
-		break;
-	case -1:
-		/* first byte missing, duplicate it. */
-		memcpy(&bins[1], vdata, num_bins - 1);
-		bins[0] = vdata[0];
-		break;
-	case 2:
-		/* MAC added 2 extra bytes at bin 30 and 32, remove them. */
-		memcpy(bins, vdata, 30);
-		bins[30] = vdata[31];
-		memcpy(&bins[31], &vdata[33], num_bins - 31);
-		break;
-	case 1:
-		/* MAC added 2 extra bytes AND first byte is missing. */
-		bins[0] = vdata[0];
-		memcpy(&bins[1], vdata, 30);
-		bins[31] = vdata[31];
-		memcpy(&bins[32], &vdata[33], num_bins - 32);
-		break;
-	default:
-		return 1;
-	}
-
-	/* DC value (value in the middle) is the blind spot of the spectral
-	 * sample and invalid, interpolate it.
-	 */
-	dc_pos = num_bins / 2;
-	bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
-
-	if ((chan_type == NL80211_CHAN_HT40MINUS) ||
-	    (chan_type == NL80211_CHAN_HT40PLUS)) {
-		s8 lower_rssi, upper_rssi;
-		s16 ext_nf;
-		u8 lower_max_index, upper_max_index;
-		u8 lower_bitmap_w, upper_bitmap_w;
-		u16 lower_mag, upper_mag;
-		struct ath9k_hw_cal_data *caldata = ah->caldata;
-		struct ath_ht20_40_mag_info *mag_info;
-
-		if (caldata)
-			ext_nf = ath9k_hw_getchan_noise(ah, ah->curchan,
-					caldata->nfCalHist[3].privNF);
-		else
-			ext_nf = ATH_DEFAULT_NOISE_FLOOR;
-
-		length = sizeof(fft_sample_40) - sizeof(struct fft_sample_tlv);
-		fft_sample_40.tlv.type = ATH_FFT_SAMPLE_HT20_40;
-		fft_sample_40.tlv.length = __cpu_to_be16(length);
-		fft_sample_40.freq = __cpu_to_be16(freq);
-		fft_sample_40.channel_type = chan_type;
-
-		if (chan_type == NL80211_CHAN_HT40PLUS) {
-			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
-			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
-
-			fft_sample_40.lower_noise = ah->noise;
-			fft_sample_40.upper_noise = ext_nf;
-		} else {
-			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
-			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
-
-			fft_sample_40.lower_noise = ext_nf;
-			fft_sample_40.upper_noise = ah->noise;
-		}
-		fft_sample_40.lower_rssi = lower_rssi;
-		fft_sample_40.upper_rssi = upper_rssi;
-
-		mag_info = ((struct ath_ht20_40_mag_info *)radar_info) - 1;
-		lower_mag = spectral_max_magnitude(mag_info->lower_bins);
-		upper_mag = spectral_max_magnitude(mag_info->upper_bins);
-		fft_sample_40.lower_max_magnitude = __cpu_to_be16(lower_mag);
-		fft_sample_40.upper_max_magnitude = __cpu_to_be16(upper_mag);
-		lower_max_index = spectral_max_index(mag_info->lower_bins);
-		upper_max_index = spectral_max_index(mag_info->upper_bins);
-		fft_sample_40.lower_max_index = lower_max_index;
-		fft_sample_40.upper_max_index = upper_max_index;
-		lower_bitmap_w = spectral_bitmap_weight(mag_info->lower_bins);
-		upper_bitmap_w = spectral_bitmap_weight(mag_info->upper_bins);
-		fft_sample_40.lower_bitmap_weight = lower_bitmap_w;
-		fft_sample_40.upper_bitmap_weight = upper_bitmap_w;
-		fft_sample_40.max_exp = mag_info->max_exp & 0xf;
-
-		fft_sample_40.tsf = __cpu_to_be64(tsf);
-
-		tlv = (struct fft_sample_tlv *)&fft_sample_40;
-	} else {
-		u8 max_index, bitmap_w;
-		u16 magnitude;
-		struct ath_ht20_mag_info *mag_info;
-
-		length = sizeof(fft_sample_20) - sizeof(struct fft_sample_tlv);
-		fft_sample_20.tlv.type = ATH_FFT_SAMPLE_HT20;
-		fft_sample_20.tlv.length = __cpu_to_be16(length);
-		fft_sample_20.freq = __cpu_to_be16(freq);
-
-		fft_sample_20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
-		fft_sample_20.noise = ah->noise;
-
-		mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
-		magnitude = spectral_max_magnitude(mag_info->all_bins);
-		fft_sample_20.max_magnitude = __cpu_to_be16(magnitude);
-		max_index = spectral_max_index(mag_info->all_bins);
-		fft_sample_20.max_index = max_index;
-		bitmap_w = spectral_bitmap_weight(mag_info->all_bins);
-		fft_sample_20.bitmap_weight = bitmap_w;
-		fft_sample_20.max_exp = mag_info->max_exp & 0xf;
-
-		fft_sample_20.tsf = __cpu_to_be64(tsf);
-
-		tlv = (struct fft_sample_tlv *)&fft_sample_20;
-	}
-
-	ath_debug_send_fft_sample(sc, tlv);
-	return 1;
-#else
-	return 0;
-#endif
-}
-
 static bool ath9k_is_mybeacon(struct ath_softc *sc, struct ieee80211_hdr *hdr)
 {
 	struct ath_hw *ah = sc->sc_ah;
diff --git a/drivers/net/wireless/ath/ath9k/spectral.c b/drivers/net/wireless/ath/ath9k/spectral.c
new file mode 100644
index 000000000000..11adb5eb51cc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/spectral.c
@@ -0,0 +1,543 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/relay.h>
+#include "ath9k.h"
+
+static s8 fix_rssi_inv_only(u8 rssi_val)
+{
+	if (rssi_val == 128)
+		rssi_val = 0;
+	return (s8) rssi_val;
+}
+
+static void ath_debug_send_fft_sample(struct ath_softc *sc,
+				      struct fft_sample_tlv *fft_sample_tlv)
+{
+	int length;
+	if (!sc->rfs_chan_spec_scan)
+		return;
+
+	length = __be16_to_cpu(fft_sample_tlv->length) +
+		 sizeof(*fft_sample_tlv);
+	relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, length);
+}
+
+/* returns 1 if this was a spectral frame, even if not handled. */
+int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
+		    struct ath_rx_status *rs, u64 tsf)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	u8 num_bins, *bins, *vdata = (u8 *)hdr;
+	struct fft_sample_ht20 fft_sample_20;
+	struct fft_sample_ht20_40 fft_sample_40;
+	struct fft_sample_tlv *tlv;
+	struct ath_radar_info *radar_info;
+	int len = rs->rs_datalen;
+	int dc_pos;
+	u16 fft_len, length, freq = ah->curchan->chan->center_freq;
+	enum nl80211_channel_type chan_type;
+
+	/* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
+	 * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
+	 * yet, but this is supposed to be possible as well.
+	 */
+	if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
+	    rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
+	    rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
+		return 0;
+
+	/* check if spectral scan bit is set. This does not have to be checked
+	 * if received through a SPECTRAL phy error, but shouldn't hurt.
+	 */
+	radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
+	if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
+		return 0;
+
+	chan_type = cfg80211_get_chandef_type(&sc->hw->conf.chandef);
+	if ((chan_type == NL80211_CHAN_HT40MINUS) ||
+	    (chan_type == NL80211_CHAN_HT40PLUS)) {
+		fft_len = SPECTRAL_HT20_40_TOTAL_DATA_LEN;
+		num_bins = SPECTRAL_HT20_40_NUM_BINS;
+		bins = (u8 *)fft_sample_40.data;
+	} else {
+		fft_len = SPECTRAL_HT20_TOTAL_DATA_LEN;
+		num_bins = SPECTRAL_HT20_NUM_BINS;
+		bins = (u8 *)fft_sample_20.data;
+	}
+
+	/* Variation in the data length is possible and will be fixed later */
+	if ((len > fft_len + 2) || (len < fft_len - 1))
+		return 1;
+
+	switch (len - fft_len) {
+	case 0:
+		/* length correct, nothing to do. */
+		memcpy(bins, vdata, num_bins);
+		break;
+	case -1:
+		/* first byte missing, duplicate it. */
+		memcpy(&bins[1], vdata, num_bins - 1);
+		bins[0] = vdata[0];
+		break;
+	case 2:
+		/* MAC added 2 extra bytes at bin 30 and 32, remove them. */
+		memcpy(bins, vdata, 30);
+		bins[30] = vdata[31];
+		memcpy(&bins[31], &vdata[33], num_bins - 31);
+		break;
+	case 1:
+		/* MAC added 2 extra bytes AND first byte is missing. */
+		bins[0] = vdata[0];
+		memcpy(&bins[1], vdata, 30);
+		bins[31] = vdata[31];
+		memcpy(&bins[32], &vdata[33], num_bins - 32);
+		break;
+	default:
+		return 1;
+	}
+
+	/* DC value (value in the middle) is the blind spot of the spectral
+	 * sample and invalid, interpolate it.
+	 */
+	dc_pos = num_bins / 2;
+	bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
+
+	if ((chan_type == NL80211_CHAN_HT40MINUS) ||
+	    (chan_type == NL80211_CHAN_HT40PLUS)) {
+		s8 lower_rssi, upper_rssi;
+		s16 ext_nf;
+		u8 lower_max_index, upper_max_index;
+		u8 lower_bitmap_w, upper_bitmap_w;
+		u16 lower_mag, upper_mag;
+		struct ath9k_hw_cal_data *caldata = ah->caldata;
+		struct ath_ht20_40_mag_info *mag_info;
+
+		if (caldata)
+			ext_nf = ath9k_hw_getchan_noise(ah, ah->curchan,
+					caldata->nfCalHist[3].privNF);
+		else
+			ext_nf = ATH_DEFAULT_NOISE_FLOOR;
+
+		length = sizeof(fft_sample_40) - sizeof(struct fft_sample_tlv);
+		fft_sample_40.tlv.type = ATH_FFT_SAMPLE_HT20_40;
+		fft_sample_40.tlv.length = __cpu_to_be16(length);
+		fft_sample_40.freq = __cpu_to_be16(freq);
+		fft_sample_40.channel_type = chan_type;
+
+		if (chan_type == NL80211_CHAN_HT40PLUS) {
+			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
+			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
+
+			fft_sample_40.lower_noise = ah->noise;
+			fft_sample_40.upper_noise = ext_nf;
+		} else {
+			lower_rssi = fix_rssi_inv_only(rs->rs_rssi_ext[0]);
+			upper_rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
+
+			fft_sample_40.lower_noise = ext_nf;
+			fft_sample_40.upper_noise = ah->noise;
+		}
+		fft_sample_40.lower_rssi = lower_rssi;
+		fft_sample_40.upper_rssi = upper_rssi;
+
+		mag_info = ((struct ath_ht20_40_mag_info *)radar_info) - 1;
+		lower_mag = spectral_max_magnitude(mag_info->lower_bins);
+		upper_mag = spectral_max_magnitude(mag_info->upper_bins);
+		fft_sample_40.lower_max_magnitude = __cpu_to_be16(lower_mag);
+		fft_sample_40.upper_max_magnitude = __cpu_to_be16(upper_mag);
+		lower_max_index = spectral_max_index(mag_info->lower_bins);
+		upper_max_index = spectral_max_index(mag_info->upper_bins);
+		fft_sample_40.lower_max_index = lower_max_index;
+		fft_sample_40.upper_max_index = upper_max_index;
+		lower_bitmap_w = spectral_bitmap_weight(mag_info->lower_bins);
+		upper_bitmap_w = spectral_bitmap_weight(mag_info->upper_bins);
+		fft_sample_40.lower_bitmap_weight = lower_bitmap_w;
+		fft_sample_40.upper_bitmap_weight = upper_bitmap_w;
+		fft_sample_40.max_exp = mag_info->max_exp & 0xf;
+
+		fft_sample_40.tsf = __cpu_to_be64(tsf);
+
+		tlv = (struct fft_sample_tlv *)&fft_sample_40;
+	} else {
+		u8 max_index, bitmap_w;
+		u16 magnitude;
+		struct ath_ht20_mag_info *mag_info;
+
+		length = sizeof(fft_sample_20) - sizeof(struct fft_sample_tlv);
+		fft_sample_20.tlv.type = ATH_FFT_SAMPLE_HT20;
+		fft_sample_20.tlv.length = __cpu_to_be16(length);
+		fft_sample_20.freq = __cpu_to_be16(freq);
+
+		fft_sample_20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl[0]);
+		fft_sample_20.noise = ah->noise;
+
+		mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
+		magnitude = spectral_max_magnitude(mag_info->all_bins);
+		fft_sample_20.max_magnitude = __cpu_to_be16(magnitude);
+		max_index = spectral_max_index(mag_info->all_bins);
+		fft_sample_20.max_index = max_index;
+		bitmap_w = spectral_bitmap_weight(mag_info->all_bins);
+		fft_sample_20.bitmap_weight = bitmap_w;
+		fft_sample_20.max_exp = mag_info->max_exp & 0xf;
+
+		fft_sample_20.tsf = __cpu_to_be64(tsf);
+
+		tlv = (struct fft_sample_tlv *)&fft_sample_20;
+	}
+
+	ath_debug_send_fft_sample(sc, tlv);
+
+	return 1;
+}
+
+/*********************/
+/* spectral_scan_ctl */
+/*********************/
+
+static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char *mode = "";
+	unsigned int len;
+
+	switch (sc->spectral_mode) {
+	case SPECTRAL_DISABLED:
+		mode = "disable";
+		break;
+	case SPECTRAL_BACKGROUND:
+		mode = "background";
+		break;
+	case SPECTRAL_CHANSCAN:
+		mode = "chanscan";
+		break;
+	case SPECTRAL_MANUAL:
+		mode = "manual";
+		break;
+	}
+	len = strlen(mode);
+	return simple_read_from_buffer(user_buf, count, ppos, mode, len);
+}
+
+static ssize_t write_file_spec_scan_ctl(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	char buf[32];
+	ssize_t len;
+
+	if (config_enabled(CONFIG_ATH9K_TX99))
+		return -EOPNOTSUPP;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+
+	if (strncmp("trigger", buf, 7) == 0) {
+		ath9k_spectral_scan_trigger(sc->hw);
+	} else if (strncmp("background", buf, 9) == 0) {
+		ath9k_spectral_scan_config(sc->hw, SPECTRAL_BACKGROUND);
+		ath_dbg(common, CONFIG, "spectral scan: background mode enabled\n");
+	} else if (strncmp("chanscan", buf, 8) == 0) {
+		ath9k_spectral_scan_config(sc->hw, SPECTRAL_CHANSCAN);
+		ath_dbg(common, CONFIG, "spectral scan: channel scan mode enabled\n");
+	} else if (strncmp("manual", buf, 6) == 0) {
+		ath9k_spectral_scan_config(sc->hw, SPECTRAL_MANUAL);
+		ath_dbg(common, CONFIG, "spectral scan: manual mode enabled\n");
+	} else if (strncmp("disable", buf, 7) == 0) {
+		ath9k_spectral_scan_config(sc->hw, SPECTRAL_DISABLED);
+		ath_dbg(common, CONFIG, "spectral scan: disabled\n");
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_spec_scan_ctl = {
+	.read = read_file_spec_scan_ctl,
+	.write = write_file_spec_scan_ctl,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+/*************************/
+/* spectral_short_repeat */
+/*************************/
+
+static ssize_t read_file_spectral_short_repeat(struct file *file,
+					       char __user *user_buf,
+					       size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = sprintf(buf, "%d\n", sc->spec_config.short_repeat);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_short_repeat(struct file *file,
+						const char __user *user_buf,
+						size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long val;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	sc->spec_config.short_repeat = val;
+	return count;
+}
+
+static const struct file_operations fops_spectral_short_repeat = {
+	.read = read_file_spectral_short_repeat,
+	.write = write_file_spectral_short_repeat,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+/******************/
+/* spectral_count */
+/******************/
+
+static ssize_t read_file_spectral_count(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = sprintf(buf, "%d\n", sc->spec_config.count);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_count(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long val;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	sc->spec_config.count = val;
+	return count;
+}
+
+static const struct file_operations fops_spectral_count = {
+	.read = read_file_spectral_count,
+	.write = write_file_spectral_count,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+/*******************/
+/* spectral_period */
+/*******************/
+
+static ssize_t read_file_spectral_period(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = sprintf(buf, "%d\n", sc->spec_config.period);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_period(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long val;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
+	sc->spec_config.period = val;
+	return count;
+}
+
+static const struct file_operations fops_spectral_period = {
+	.read = read_file_spectral_period,
+	.write = write_file_spectral_period,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+/***********************/
+/* spectral_fft_period */
+/***********************/
+
+static ssize_t read_file_spectral_fft_period(struct file *file,
+					     char __user *user_buf,
+					     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = sprintf(buf, "%d\n", sc->spec_config.fft_period);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_fft_period(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long val;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val < 0 || val > 15)
+		return -EINVAL;
+
+	sc->spec_config.fft_period = val;
+	return count;
+}
+
+static const struct file_operations fops_spectral_fft_period = {
+	.read = read_file_spectral_fft_period,
+	.write = write_file_spectral_fft_period,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+/*******************/
+/* Relay interface */
+/*******************/
+
+static struct dentry *create_buf_file_handler(const char *filename,
+					      struct dentry *parent,
+					      umode_t mode,
+					      struct rchan_buf *buf,
+					      int *is_global)
+{
+	struct dentry *buf_file;
+
+	buf_file = debugfs_create_file(filename, mode, parent, buf,
+				       &relay_file_operations);
+	*is_global = 1;
+	return buf_file;
+}
+
+static int remove_buf_file_handler(struct dentry *dentry)
+{
+	debugfs_remove(dentry);
+
+	return 0;
+}
+
+struct rchan_callbacks rfs_spec_scan_cb = {
+	.create_buf_file = create_buf_file_handler,
+	.remove_buf_file = remove_buf_file_handler,
+};
+
+/*********************/
+/* Debug Init/Deinit */
+/*********************/
+
+void ath9k_spectral_deinit_debug(struct ath_softc *sc)
+{
+	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
+		relay_close(sc->rfs_chan_spec_scan);
+		sc->rfs_chan_spec_scan = NULL;
+	}
+}
+
+void ath9k_spectral_init_debug(struct ath_softc *sc)
+{
+	sc->rfs_chan_spec_scan = relay_open("spectral_scan",
+					    sc->debug.debugfs_phy,
+					    1024, 256, &rfs_spec_scan_cb,
+					    NULL);
+	debugfs_create_file("spectral_scan_ctl",
+			    S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc,
+			    &fops_spec_scan_ctl);
+	debugfs_create_file("spectral_short_repeat",
+			    S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc,
+			    &fops_spectral_short_repeat);
+	debugfs_create_file("spectral_count",
+			    S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc,
+			    &fops_spectral_count);
+	debugfs_create_file("spectral_period",
+			    S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc,
+			    &fops_spectral_period);
+	debugfs_create_file("spectral_fft_period",
+			    S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc,
+			    &fops_spectral_fft_period);
+}
diff --git a/drivers/net/wireless/ath/ath9k/spectral.h b/drivers/net/wireless/ath/ath9k/spectral.h
new file mode 100644
index 000000000000..ead63412ee1a
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/spectral.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef SPECTRAL_H
+#define SPECTRAL_H
+
+/* enum spectral_mode:
+ *
+ * @SPECTRAL_DISABLED: spectral mode is disabled
+ * @SPECTRAL_BACKGROUND: hardware sends samples when it is not busy with
+ *	something else.
+ * @SPECTRAL_MANUAL: spectral scan is enabled, triggering for samples
+ *	is performed manually.
+ * @SPECTRAL_CHANSCAN: Like manual, but also triggered when changing channels
+ *	during a channel scan.
+ */
+enum spectral_mode {
+	SPECTRAL_DISABLED = 0,
+	SPECTRAL_BACKGROUND,
+	SPECTRAL_MANUAL,
+	SPECTRAL_CHANSCAN,
+};
+
+#define SPECTRAL_SCAN_BITMASK		0x10
+/* Radar info packet format, used for DFS and spectral formats. */
+struct ath_radar_info {
+	u8 pulse_length_pri;
+	u8 pulse_length_ext;
+	u8 pulse_bw_info;
+} __packed;
+
+/* The HT20 spectral data has 4 bytes of additional information at it's end.
+ *
+ * [7:0]: all bins {max_magnitude[1:0], bitmap_weight[5:0]}
+ * [7:0]: all bins  max_magnitude[9:2]
+ * [7:0]: all bins {max_index[5:0], max_magnitude[11:10]}
+ * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned)
+ */
+struct ath_ht20_mag_info {
+	u8 all_bins[3];
+	u8 max_exp;
+} __packed;
+
+#define SPECTRAL_HT20_NUM_BINS		56
+
+/* WARNING: don't actually use this struct! MAC may vary the amount of
+ * data by -1/+2. This struct is for reference only.
+ */
+struct ath_ht20_fft_packet {
+	u8 data[SPECTRAL_HT20_NUM_BINS];
+	struct ath_ht20_mag_info mag_info;
+	struct ath_radar_info radar_info;
+} __packed;
+
+#define SPECTRAL_HT20_TOTAL_DATA_LEN	(sizeof(struct ath_ht20_fft_packet))
+
+/* Dynamic 20/40 mode:
+ *
+ * [7:0]: lower bins {max_magnitude[1:0], bitmap_weight[5:0]}
+ * [7:0]: lower bins  max_magnitude[9:2]
+ * [7:0]: lower bins {max_index[5:0], max_magnitude[11:10]}
+ * [7:0]: upper bins {max_magnitude[1:0], bitmap_weight[5:0]}
+ * [7:0]: upper bins  max_magnitude[9:2]
+ * [7:0]: upper bins {max_index[5:0], max_magnitude[11:10]}
+ * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned)
+ */
+struct ath_ht20_40_mag_info {
+	u8 lower_bins[3];
+	u8 upper_bins[3];
+	u8 max_exp;
+} __packed;
+
+#define SPECTRAL_HT20_40_NUM_BINS		128
+
+/* WARNING: don't actually use this struct! MAC may vary the amount of
+ * data. This struct is for reference only.
+ */
+struct ath_ht20_40_fft_packet {
+	u8 data[SPECTRAL_HT20_40_NUM_BINS];
+	struct ath_ht20_40_mag_info mag_info;
+	struct ath_radar_info radar_info;
+} __packed;
+
+
+#define SPECTRAL_HT20_40_TOTAL_DATA_LEN	(sizeof(struct ath_ht20_40_fft_packet))
+
+/* grabs the max magnitude from the all/upper/lower bins */
+static inline u16 spectral_max_magnitude(u8 *bins)
+{
+	return (bins[0] & 0xc0) >> 6 |
+	       (bins[1] & 0xff) << 2 |
+	       (bins[2] & 0x03) << 10;
+}
+
+/* return the max magnitude from the all/upper/lower bins */
+static inline u8 spectral_max_index(u8 *bins)
+{
+	s8 m = (bins[2] & 0xfc) >> 2;
+
+	/* TODO: this still doesn't always report the right values ... */
+	if (m > 32)
+		m |= 0xe0;
+	else
+		m &= ~0xe0;
+
+	return m + 29;
+}
+
+/* return the bitmap weight from the all/upper/lower bins */
+static inline u8 spectral_bitmap_weight(u8 *bins)
+{
+	return bins[0] & 0x3f;
+}
+
+/* FFT sample format given to userspace via debugfs.
+ *
+ * Please keep the type/length at the front position and change
+ * other fields after adding another sample type
+ *
+ * TODO: this might need rework when switching to nl80211-based
+ * interface.
+ */
+enum ath_fft_sample_type {
+	ATH_FFT_SAMPLE_HT20 = 1,
+	ATH_FFT_SAMPLE_HT20_40,
+};
+
+struct fft_sample_tlv {
+	u8 type;	/* see ath_fft_sample */
+	__be16 length;
+	/* type dependent data follows */
+} __packed;
+
+struct fft_sample_ht20 {
+	struct fft_sample_tlv tlv;
+
+	u8 max_exp;
+
+	__be16 freq;
+	s8 rssi;
+	s8 noise;
+
+	__be16 max_magnitude;
+	u8 max_index;
+	u8 bitmap_weight;
+
+	__be64 tsf;
+
+	u8 data[SPECTRAL_HT20_NUM_BINS];
+} __packed;
+
+struct fft_sample_ht20_40 {
+	struct fft_sample_tlv tlv;
+
+	u8 channel_type;
+	__be16 freq;
+
+	s8 lower_rssi;
+	s8 upper_rssi;
+
+	__be64 tsf;
+
+	s8 lower_noise;
+	s8 upper_noise;
+
+	__be16 lower_max_magnitude;
+	__be16 upper_max_magnitude;
+
+	u8 lower_max_index;
+	u8 upper_max_index;
+
+	u8 lower_bitmap_weight;
+	u8 upper_bitmap_weight;
+
+	u8 max_exp;
+
+	u8 data[SPECTRAL_HT20_40_NUM_BINS];
+} __packed;
+
+void ath9k_spectral_init_debug(struct ath_softc *sc);
+void ath9k_spectral_deinit_debug(struct ath_softc *sc);
+
+void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw);
+int ath9k_spectral_scan_config(struct ieee80211_hw *hw,
+			       enum spectral_mode spectral_mode);
+
+#ifdef CONFIG_ATH9K_DEBUGFS
+int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
+		    struct ath_rx_status *rs, u64 tsf);
+#else
+static inline int ath_process_fft(struct ath_softc *sc,
+				  struct ieee80211_hdr *hdr,
+				  struct ath_rx_status *rs, u64 tsf)
+{
+	return 0;
+}
+#endif /* CONFIG_ATH9K_DEBUGFS */
+
+#endif /* SPECTRAL_H */
-- 
cgit v1.2.3


From 7b6ef9982df6ee5578fcc061a7f613908f1e65c5 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:19 +0530
Subject: ath9k: Cleanup ath9k.h

* Remove unused macros.
* Move definitions to appropriate sections.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 179 ++++++++++++++-------------------
 drivers/net/wireless/ath/ath9k/init.c  |   2 +-
 2 files changed, 79 insertions(+), 102 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 55bb87400b1a..9ad8a6738afd 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -29,39 +29,13 @@
 #include "dfs.h"
 #include "spectral.h"
 
-/*
- * Header for the ath9k.ko driver core *only* -- hw code nor any other driver
- * should rely on this file or its contents.
- */
-
 struct ath_node;
+struct ath_rate_table;
 
-/* Macro to expand scalars to 64-bit objects */
-
-#define	ito64(x) (sizeof(x) == 1) ?			\
-	(((unsigned long long int)(x)) & (0xff)) :	\
-	(sizeof(x) == 2) ?				\
-	(((unsigned long long int)(x)) & 0xffff) :	\
-	((sizeof(x) == 4) ?				\
-	 (((unsigned long long int)(x)) & 0xffffffff) : \
-	 (unsigned long long int)(x))
-
-/* increment with wrap-around */
-#define INCR(_l, _sz)   do {			\
-		(_l)++;				\
-		(_l) &= ((_sz) - 1);		\
-	} while (0)
-
-/* decrement with wrap-around */
-#define DECR(_l,  _sz)  do {			\
-		(_l)--;				\
-		(_l) &= ((_sz) - 1);		\
-	} while (0)
-
-#define TSF_TO_TU(_h,_l) \
-	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
-
-#define	ATH_TXQ_SETUP(sc, i)        ((sc)->tx.txqsetup & (1<<i))
+extern struct ieee80211_ops ath9k_ops;
+extern int ath9k_modparam_nohwcrypt;
+extern int led_blink;
+extern bool is_ath9k_unloaded;
 
 struct ath_config {
 	u16 txpowlimit;
@@ -71,6 +45,17 @@ struct ath_config {
 /* Descriptor Management */
 /*************************/
 
+#define ATH_TXSTATUS_RING_SIZE 512
+
+/* Macro to expand scalars to 64-bit objects */
+#define	ito64(x) (sizeof(x) == 1) ?			\
+	(((unsigned long long int)(x)) & (0xff)) :	\
+	(sizeof(x) == 2) ?				\
+	(((unsigned long long int)(x)) & 0xffff) :	\
+	((sizeof(x) == 4) ?				\
+	 (((unsigned long long int)(x)) & 0xffffffff) : \
+	 (unsigned long long int)(x))
+
 #define ATH_TXBUF_RESET(_bf) do {				\
 		(_bf)->bf_lastbf = NULL;			\
 		(_bf)->bf_next = NULL;				\
@@ -78,23 +63,6 @@ struct ath_config {
 		       sizeof(struct ath_buf_state));		\
 	} while (0)
 
-/**
- * enum buffer_type - Buffer type flags
- *
- * @BUF_AMPDU: This buffer is an ampdu, as part of an aggregate (during TX)
- * @BUF_AGGR: Indicates whether the buffer can be aggregated
- *	(used in aggregation scheduling)
- */
-enum buffer_type {
-	BUF_AMPDU		= BIT(0),
-	BUF_AGGR		= BIT(1),
-};
-
-#define bf_isampdu(bf)		(bf->bf_state.bf_type & BUF_AMPDU)
-#define bf_isaggr(bf)		(bf->bf_state.bf_type & BUF_AGGR)
-
-#define ATH_TXSTATUS_RING_SIZE 512
-
 #define	DS2PHYS(_dd, _ds)						\
 	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
@@ -114,11 +82,20 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 /* RX / TX */
 /***********/
 
+#define	ATH_TXQ_SETUP(sc, i) ((sc)->tx.txqsetup & (1<<i))
+
+/* increment with wrap-around */
+#define INCR(_l, _sz)   do {			\
+		(_l)++;				\
+		(_l) &= ((_sz) - 1);		\
+	} while (0)
+
 #define ATH_RXBUF               512
 #define ATH_TXBUF               512
 #define ATH_TXBUF_RESERVE       5
 #define ATH_MAX_QDEPTH          (ATH_TXBUF / 4 - ATH_TXBUF_RESERVE)
 #define ATH_TXMAXTRY            13
+#define ATH_MAX_SW_RETRIES      30
 
 #define TID_TO_WME_AC(_tid)				\
 	((((_tid) == 0) || ((_tid) == 3)) ? IEEE80211_AC_BE :	\
@@ -134,6 +111,9 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 #define ATH_AGGR_MIN_QDEPTH        2
 /* minimum h/w qdepth for non-aggregated traffic */
 #define ATH_NON_AGGR_MIN_QDEPTH    8
+#define ATH_TX_COMPLETE_POLL_INT   1000
+#define ATH_TXFIFO_DEPTH           8
+#define ATH_TX_ERROR               0x01
 
 #define IEEE80211_SEQ_SEQ_SHIFT    4
 #define IEEE80211_SEQ_MAX          4096
@@ -168,9 +148,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 
 #define IS_CCK_RATE(rate) ((rate >= 0x18) && (rate <= 0x1e))
 
-#define ATH_TX_COMPLETE_POLL_INT	1000
-
-#define ATH_TXFIFO_DEPTH 8
 struct ath_txq {
 	int mac80211_qnum; /* mac80211 queue number, -1 means not mac80211 Q */
 	u32 axq_qnum; /* ath9k hardware queue number */
@@ -215,6 +192,21 @@ struct ath_rxbuf {
 	dma_addr_t bf_buf_addr;
 };
 
+/**
+ * enum buffer_type - Buffer type flags
+ *
+ * @BUF_AMPDU: This buffer is an ampdu, as part of an aggregate (during TX)
+ * @BUF_AGGR: Indicates whether the buffer can be aggregated
+ *	(used in aggregation scheduling)
+ */
+enum buffer_type {
+	BUF_AMPDU		= BIT(0),
+	BUF_AGGR		= BIT(1),
+};
+
+#define bf_isampdu(bf)		(bf->bf_state.bf_type & BUF_AMPDU)
+#define bf_isaggr(bf)		(bf->bf_state.bf_type & BUF_AGGR)
+
 struct ath_buf_state {
 	u8 bf_type;
 	u8 bfs_paprd;
@@ -279,7 +271,6 @@ struct ath_tx_control {
 	struct ieee80211_sta *sta;
 };
 
-#define ATH_TX_ERROR        0x01
 
 /**
  * @txq_map:  Index is mac80211 queue number.  This is
@@ -373,6 +364,22 @@ struct ath_vif {
 	struct ath_buf *av_bcbuf;
 };
 
+struct ath9k_vif_iter_data {
+	u8 hw_macaddr[ETH_ALEN]; /* address of the first vif */
+	u8 mask[ETH_ALEN]; /* bssid mask */
+	bool has_hw_macaddr;
+
+	int naps;      /* number of AP vifs */
+	int nmeshes;   /* number of mesh vifs */
+	int nstations; /* number of station vifs */
+	int nwds;      /* number of WDS vifs */
+	int nadhocs;   /* number of adhoc vifs */
+};
+
+void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct ath9k_vif_iter_data *iter_data);
+
 /*******************/
 /* Beacon Handling */
 /*******************/
@@ -388,6 +395,9 @@ struct ath_vif {
 #define ATH_DEFAULT_BMISS_LIMIT 	10
 #define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
 
+#define TSF_TO_TU(_h,_l) \
+	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
+
 struct ath_beacon_config {
 	int beacon_interval;
 	u16 listen_interval;
@@ -441,10 +451,9 @@ bool ath9k_csa_is_finished(struct ath_softc *sc);
 #define ATH_LONG_CALINTERVAL_INT  1000    /* 1000 ms */
 #define ATH_LONG_CALINTERVAL      30000   /* 30 seconds */
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
-#define ATH_ANI_MAX_SKIP_COUNT  10
-
-#define ATH_PAPRD_TIMEOUT	100 /* msecs */
-#define ATH_PLL_WORK_INTERVAL   100
+#define ATH_ANI_MAX_SKIP_COUNT    10
+#define ATH_PAPRD_TIMEOUT         100 /* msecs */
+#define ATH_PLL_WORK_INTERVAL     100
 
 void ath_tx_complete_poll_work(struct work_struct *work);
 void ath_reset_work(struct work_struct *work);
@@ -538,12 +547,6 @@ static inline int ath9k_dump_btcoex(struct ath_softc *sc, u8 *buf, u32 size)
 }
 #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
 
-struct ath9k_wow_pattern {
-	u8 pattern_bytes[MAX_PATTERN_SIZE];
-	u8 mask_bytes[MAX_PATTERN_SIZE];
-	u32 pattern_len;
-};
-
 /********************/
 /*   LED Control    */
 /********************/
@@ -575,6 +578,12 @@ static inline void ath_fill_led_pin(struct ath_softc *sc)
 /* Wake on Wireless LAN */
 /************************/
 
+struct ath9k_wow_pattern {
+	u8 pattern_bytes[MAX_PATTERN_SIZE];
+	u8 mask_bytes[MAX_PATTERN_SIZE];
+	u32 pattern_len;
+};
+
 #ifdef CONFIG_ATH9K_WOW
 void ath9k_init_wow(struct ieee80211_hw *hw);
 int ath9k_suspend(struct ieee80211_hw *hw,
@@ -678,13 +687,8 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs);
  * Used when PCI device not fully initialized by bootrom/BIOS
 */
 #define DEFAULT_CACHELINE       32
-#define ATH_REGCLASSIDS_MAX     10
 #define ATH_CABQ_READY_TIME     80      /* % of beacon interval */
-#define ATH_MAX_SW_RETRIES      30
-#define ATH_CHAN_MAX            255
-
 #define ATH_TXPOWER_MAX         100     /* .5 dBm units */
-#define ATH_RATE_DUMMY_MARKER   0
 
 enum sc_op_flags {
 	SC_OP_INVALID,
@@ -703,20 +707,6 @@ enum sc_op_flags {
 #define PS_BEACON_SYNC            BIT(4)
 #define PS_WAIT_FOR_ANI           BIT(5)
 
-struct ath_rate_table;
-
-struct ath9k_vif_iter_data {
-	u8 hw_macaddr[ETH_ALEN]; /* address of the first vif */
-	u8 mask[ETH_ALEN]; /* bssid mask */
-	bool has_hw_macaddr;
-
-	int naps;      /* number of AP vifs */
-	int nmeshes;   /* number of mesh vifs */
-	int nstations; /* number of station vifs */
-	int nwds;      /* number of WDS vifs */
-	int nadhocs;   /* number of adhoc vifs */
-};
-
 struct ath_softc {
 	struct ieee80211_hw *hw;
 	struct device *dev;
@@ -826,19 +816,13 @@ static inline int ath9k_tx99_send(struct ath_softc *sc,
 }
 #endif /* CONFIG_ATH9K_TX99 */
 
-void ath9k_tasklet(unsigned long data);
-int ath_cabq_update(struct ath_softc *);
-
 static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 {
 	common->bus_ops->read_cachesize(common, csz);
 }
 
-extern struct ieee80211_ops ath9k_ops;
-extern int ath9k_modparam_nohwcrypt;
-extern int led_blink;
-extern bool is_ath9k_unloaded;
-
+void ath9k_tasklet(unsigned long data);
+int ath_cabq_update(struct ath_softc *);
 u8 ath9k_parse_mpdudensity(u8 mpdudensity);
 irqreturn_t ath_isr(int irq, void *dev);
 int ath_reset(struct ath_softc *sc);
@@ -847,8 +831,12 @@ void ath_restart_work(struct ath_softc *sc);
 int ath9k_init_device(u16 devid, struct ath_softc *sc,
 		    const struct ath_bus_ops *bus_ops);
 void ath9k_deinit_device(struct ath_softc *sc);
-void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath9k_reload_chainmask_settings(struct ath_softc *sc);
+u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate);
+void ath_start_rfkill_poll(struct ath_softc *sc);
+void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
+void ath9k_ps_wakeup(struct ath_softc *sc);
+void ath9k_ps_restore(struct ath_softc *sc);
 
 #ifdef CONFIG_ATH9K_PCI
 int ath_pci_init(void);
@@ -866,15 +854,4 @@ static inline int ath_ahb_init(void) { return 0; };
 static inline void ath_ahb_exit(void) {};
 #endif
 
-void ath9k_ps_wakeup(struct ath_softc *sc);
-void ath9k_ps_restore(struct ath_softc *sc);
-
-u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate);
-
-void ath_start_rfkill_poll(struct ath_softc *sc);
-void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
-void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ath9k_vif_iter_data *iter_data);
-
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 609b7e13f3f0..9d2c3eb9e34e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -899,7 +899,7 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
-void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
-- 
cgit v1.2.3


From f5bf30db01053883a812402cadf2e23b6902bc03 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:20 +0530
Subject: ath9k: Remove unneeded ref. count initialization

The interrupt reference counter is always initialized
in ath9k_start().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 9d2c3eb9e34e..ea67c0100af2 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -705,7 +705,6 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	ah->reg_ops.read = ath9k_ioread32;
 	ah->reg_ops.write = ath9k_iowrite32;
 	ah->reg_ops.rmw = ath9k_reg_rmw;
-	atomic_set(&ah->intr_ref_cnt, -1);
 	sc->sc_ah = ah;
 	pCap = &ah->caps;
 
-- 
cgit v1.2.3


From 66a80a3a3ec461d4d049877db57f3a9e182f0361 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:21 +0530
Subject: ath9k: Initialize "switchcomspdt" eeprom field explicitly

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index ec317d6937d6..86baa20a6848 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -131,6 +131,7 @@ static const struct ar9300_eeprom ar9300_default = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
 		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -333,6 +334,7 @@ static const struct ar9300_eeprom ar9300_default = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0c80c080),
 		.papdRateMaskHt40 = LE32(0x0080c080),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -707,6 +709,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0c80c080),
 		.papdRateMaskHt40 = LE32(0x0080c080),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -909,6 +912,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
 		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -1284,6 +1288,7 @@ static const struct ar9300_eeprom ar9300_h112 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0c80c080),
 		.papdRateMaskHt40 = LE32(0x0080c080),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -1486,6 +1491,7 @@ static const struct ar9300_eeprom ar9300_h112 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
 		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -1861,6 +1867,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0c80c080),
 		.papdRateMaskHt40 = LE32(0x0080c080),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -2063,6 +2070,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
 		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -2437,6 +2445,7 @@ static const struct ar9300_eeprom ar9300_h116 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0c80C080),
 		.papdRateMaskHt40 = LE32(0x0080C080),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
@@ -2639,6 +2648,7 @@ static const struct ar9300_eeprom ar9300_h116 = {
 		.thresh62 = 28,
 		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
 		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.switchcomspdt = 0,
 		.xlna_bias_strength = 0,
 		.futureModal = {
 			0, 0, 0, 0, 0, 0, 0,
-- 
cgit v1.2.3


From ee65b38890fd98ba927aa2a69c5cc2b2cc1c9c38 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:22 +0530
Subject: ath9k: Update BaseExtension_1 eeprom structure

* Add a new field "misc_enable"
* Use int_8 for tempslopextension.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 +++++-----
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 14 ++++++++++++--
 2 files changed, 17 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 86baa20a6848..d9e09bf178aa 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -139,7 +139,7 @@ static const struct ar9300_eeprom ar9300_default = {
 	 },
 	.base_ext1 = {
 		.ant_div_control = 0,
-		.future = {0, 0, 0},
+		.future = {0, 0},
 		.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
 	},
 	.calFreqPier2G = {
@@ -717,7 +717,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 	 },
 	 .base_ext1 = {
 		.ant_div_control = 0,
-		.future = {0, 0, 0},
+		.future = {0, 0},
 		.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
 	 },
 	.calFreqPier2G = {
@@ -1296,7 +1296,7 @@ static const struct ar9300_eeprom ar9300_h112 = {
 	},
 	.base_ext1 = {
 		.ant_div_control = 0,
-		.future = {0, 0, 0},
+		.future = {0, 0},
 		.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
 	},
 	.calFreqPier2G = {
@@ -1875,7 +1875,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
 	},
 	.base_ext1 = {
 		.ant_div_control = 0,
-		.future = {0, 0, 0},
+		.future = {0, 0},
 		.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
 	},
 	.calFreqPier2G = {
@@ -2453,7 +2453,7 @@ static const struct ar9300_eeprom ar9300_h116 = {
 	 },
 	 .base_ext1 = {
 		.ant_div_control = 0,
-		.future = {0, 0, 0},
+		.future = {0, 0},
 		.tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
 	 },
 	.calFreqPier2G = {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 0e5daa58a4fc..694ca2e680e5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -270,10 +270,20 @@ struct cal_ctl_data_5g {
 	u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
 } __packed;
 
+#define MAX_BASE_EXTENSION_FUTURE 2
+
 struct ar9300_BaseExtension_1 {
 	u8 ant_div_control;
-	u8 future[3];
-	u8 tempslopextension[8];
+	u8 future[MAX_BASE_EXTENSION_FUTURE];
+	/*
+	 * misc_enable:
+	 *
+	 * BIT 0   - TX Gain Cap enable.
+	 * BIT 1   - Uncompressed Checksum enable.
+	 * BIT 2/3 - MinCCApwr enable 2g/5g.
+	 */
+	u8 misc_enable;
+	int8_t tempslopextension[8];
 	int8_t quick_drop_low;
 	int8_t quick_drop_high;
 } __packed;
-- 
cgit v1.2.3


From 3533bf6b15a0885344367aa2a4b3e2c8e496520f Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:23 +0530
Subject: ath9k: Fix regulatory compliance

To comply with ETSI regulations, make sure that
the CCA registers are programmed with the threshold
values from the EEPROM/Caldata. A new field is used
to indicate if the card has been calibrated with the
required threshold information.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 32 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    |  4 +++-
 2 files changed, 35 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d9e09bf178aa..c8d22eccfef8 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4121,6 +4121,37 @@ static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah)
 	}
 }
 
+static void ar9003_hw_apply_minccapwr_thresh(struct ath_hw *ah,
+					     bool is2ghz)
+{
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+	const u_int32_t cca_ctrl[AR9300_MAX_CHAINS] = {
+		AR_PHY_CCA_CTRL_0,
+		AR_PHY_CCA_CTRL_1,
+		AR_PHY_CCA_CTRL_2,
+	};
+	int chain;
+	u32 val;
+
+	if (is2ghz) {
+		if (!(eep->base_ext1.misc_enable & BIT(2)))
+			return;
+	} else {
+		if (!(eep->base_ext1.misc_enable & BIT(3)))
+			return;
+	}
+
+	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+		if (!(ah->caps.tx_chainmask & BIT(chain)))
+			continue;
+
+		val = ar9003_modal_header(ah, is2ghz)->noiseFloorThreshCh[chain];
+		REG_RMW_FIELD(ah, cca_ctrl[chain],
+			      AR_PHY_EXT_CCA0_THRESH62_1, val);
+	}
+
+}
+
 static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
 					     struct ath9k_channel *chan)
 {
@@ -4135,6 +4166,7 @@ static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
 	if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah))
 		ar9003_hw_internal_regulator_apply(ah);
 	ar9003_hw_apply_tuning_caps(ah);
+	ar9003_hw_apply_minccapwr_thresh(ah, chan);
 	ar9003_hw_txend_to_xpa_off_apply(ah, is2ghz);
 	ar9003_hw_thermometer_apply(ah);
 	ar9003_hw_thermo_cal_apply(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index bbbfc4dc59eb..1b441715ba39 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -270,7 +270,7 @@
 #define AR_PHY_AGC              (AR_AGC_BASE + 0x14)
 #define AR_PHY_EXT_ATTEN_CTL_0  (AR_AGC_BASE + 0x18)
 #define AR_PHY_CCA_0            (AR_AGC_BASE + 0x1c)
-#define AR_PHY_EXT_CCA0         (AR_AGC_BASE + 0x20)
+#define AR_PHY_CCA_CTRL_0       (AR_AGC_BASE + 0x20)
 #define AR_PHY_RESTART          (AR_AGC_BASE + 0x24)
 
 /*
@@ -398,6 +398,8 @@
 #define AR9280_PHY_CCA_THRESH62_S   12
 #define AR_PHY_EXT_CCA0_THRESH62    0x000000FF
 #define AR_PHY_EXT_CCA0_THRESH62_S  0
+#define AR_PHY_EXT_CCA0_THRESH62_1    0x000001FF
+#define AR_PHY_EXT_CCA0_THRESH62_1_S  0
 #define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK          0x0000003F
 #define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK_S        0
 #define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME           0x00001FC0
-- 
cgit v1.2.3


From afe36533c108f55c5245397a1cc82af312a32614 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:25 +0530
Subject: ath9k: Add a delay between RTC reset/clear for AR9003

The small delay that is present between a RTC reset/clear
operation is required for the chip to settle and this is
needed for all chips, not just the AR9002 family.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2318bb90cd63..28009148e313 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1399,8 +1399,7 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah)
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
-	if (!AR_SREV_9300_20_OR_LATER(ah))
-		udelay(2);
+	udelay(2);
 
 	if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah))
 		REG_WRITE(ah, AR_RC, 0);
-- 
cgit v1.2.3


From 4dc78c437a0a2ac152a2b2c5e91a814a6ef3599e Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:26 +0530
Subject: ath9k: Fix RTC reset delay

The delay that is required after issuing a RTC reset
varies for each chip. Handle this properly.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 28009148e313..3ca682f3c704 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1363,7 +1363,12 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
-	udelay(50);
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		udelay(50);
+	else if (AR_SREV_9100(ah))
+		udelay(10000);
+	else
+		udelay(100);
 
 	REG_WRITE(ah, AR_RTC_RC, 0);
 	if (!ath9k_hw_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0, AH_WAIT_TIMEOUT)) {
-- 
cgit v1.2.3


From d7df7a55cbac30acf8edade8f06458d35900ebfa Mon Sep 17 00:00:00 2001
From: Sujith Manoharan
Date: Wed, 18 Dec 2013 09:53:27 +0530
Subject: ath9k: Use a subroutine for the AR9330 reset WAR

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   | 70 +++++++++++++++++++----------------
 drivers/net/wireless/ath/ath9k/init.c |  1 -
 2 files changed, 38 insertions(+), 33 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 3ca682f3c704..0e548a461f55 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1272,6 +1272,42 @@ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
 	*coef_exponent = coef_exp - 16;
 }
 
+/* AR9330 WAR:
+ * call external reset function to reset WMAC if:
+ * - doing a cold reset
+ * - we have pending frames in the TX queues.
+ */
+static bool ath9k_hw_ar9330_reset_war(struct ath_hw *ah, int type)
+{
+	int i, npend = 0;
+
+	for (i = 0; i < AR_NUM_QCU; i++) {
+		npend = ath9k_hw_numtxpending(ah, i);
+		if (npend)
+			break;
+	}
+
+	if (ah->external_reset &&
+	    (npend || type == ATH9K_RESET_COLD)) {
+		int reset_err = 0;
+
+		ath_dbg(ath9k_hw_common(ah), RESET,
+			"reset MAC via external reset\n");
+
+		reset_err = ah->external_reset();
+		if (reset_err) {
+			ath_err(ath9k_hw_common(ah),
+				"External reset failed, err=%d\n",
+				reset_err);
+			return false;
+		}
+
+		REG_WRITE(ah, AR_RTC_RESET, 1);
+	}
+
+	return true;
+}
+
 static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 {
 	u32 rst_flags;
@@ -1322,38 +1358,8 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 	}
 
 	if (AR_SREV_9330(ah)) {
-		int npend = 0;
-		int i;
-
-		/* AR9330 WAR:
-		 * call external reset function to reset WMAC if:
-		 * - doing a cold reset
-		 * - we have pending frames in the TX queues
-		 */
-
-		for (i = 0; i < AR_NUM_QCU; i++) {
-			npend = ath9k_hw_numtxpending(ah, i);
-			if (npend)
-				break;
-		}
-
-		if (ah->external_reset &&
-		    (npend || type == ATH9K_RESET_COLD)) {
-			int reset_err = 0;
-
-			ath_dbg(ath9k_hw_common(ah), RESET,
-				"reset MAC via external reset\n");
-
-			reset_err = ah->external_reset();
-			if (reset_err) {
-				ath_err(ath9k_hw_common(ah),
-					"External reset failed, err=%d\n",
-					reset_err);
-				return false;
-			}
-
-			REG_WRITE(ah, AR_RTC_RESET, 1);
-		}
+		if (!ath9k_hw_ar9330_reset_war(ah, type))
+			return false;
 	}
 
 	if (ath9k_hw_mci_is_enabled(ah))
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index ea67c0100af2..e63465b7eab9 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -470,7 +470,6 @@ static int ath9k_init_queues(struct ath_softc *sc)
 
 	sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah);
 	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
-
 	ath_cabq_update(sc);
 
 	sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0);
-- 
cgit v1.2.3


From 08f336b808cea6f776f918f21ad05fe433362987 Mon Sep 17 00:00:00 2001
From: Levente Kurusa
Date: Thu, 19 Dec 2013 16:06:52 +0100
Subject: bcma: add missing put_device call

This is required so that we give up the last reference to the device.

Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index e15430a82e90..5a9f6bdc88f1 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -176,6 +176,7 @@ static int bcma_register_cores(struct bcma_bus *bus)
 			bcma_err(bus,
 				 "Could not register dev for core 0x%03X\n",
 				 core->id.id);
+			put_device(&core->dev);
 			continue;
 		}
 		core->dev_registered = true;
-- 
cgit v1.2.3


From 6a4d05dc0c0178b0c30dbda6e9bb79b5dd9662f5 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Thu, 19 Dec 2013 18:01:48 +0100
Subject: ath9k: move ath9k_debug_sync_cause out of ath9k_hw

ath9k_hw should not depend on any ath9k data structures like ath_softc

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9002_mac.c |  6 +++--
 drivers/net/wireless/ath/ath9k/ar9003_mac.c |  6 +++--
 drivers/net/wireless/ath/ath9k/debug.c      | 41 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/debug.h      |  7 +++++
 drivers/net/wireless/ath/ath9k/hw-ops.h     |  5 ++--
 drivers/net/wireless/ath/ath9k/hw.c         | 42 -----------------------------
 drivers/net/wireless/ath/ath9k/hw.h         | 10 ++-----
 drivers/net/wireless/ath/ath9k/main.c       |  4 ++-
 8 files changed, 64 insertions(+), 57 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 8d78253c26ce..857ede3a999c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -29,7 +29,8 @@ static void ar9002_hw_set_desc_link(void *ds, u32 ds_link)
 	((struct ath_desc*) ds)->ds_link = ds_link;
 }
 
-static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
+static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked,
+			      u32 *sync_cause_p)
 {
 	u32 isr = 0;
 	u32 mask2 = 0;
@@ -136,7 +137,8 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 	}
 
 	if (sync_cause) {
-		ath9k_debug_sync_cause(common, sync_cause);
+		if (sync_cause_p)
+			*sync_cause_p = sync_cause;
 		fatal_int =
 			(sync_cause &
 			 (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR))
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 6eb8657681bf..729ffbf07343 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -175,7 +175,8 @@ static void ar9003_hw_set_desc_link(void *ds, u32 ds_link)
 	ads->ctl10 |= ar9003_calc_ptr_chksum(ads);
 }
 
-static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
+static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked,
+			      u32 *sync_cause_p)
 {
 	u32 isr = 0;
 	u32 mask2 = 0;
@@ -310,7 +311,8 @@ static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 		ar9003_mci_get_isr(ah, masked);
 
 	if (sync_cause) {
-		ath9k_debug_sync_cause(common, sync_cause);
+		if (sync_cause_p)
+			*sync_cause_p = sync_cause;
 		fatal_int =
 			(sync_cause &
 			 (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR))
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 4c6f8b107ed6..b041052a10ee 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -26,6 +26,47 @@
 #define REG_READ_D(_ah, _reg) \
 	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
+void ath9k_debug_sync_cause(struct ath_softc *sc, u32 sync_cause)
+{
+	if (sync_cause)
+		sc->debug.stats.istats.sync_cause_all++;
+	if (sync_cause & AR_INTR_SYNC_RTC_IRQ)
+		sc->debug.stats.istats.sync_rtc_irq++;
+	if (sync_cause & AR_INTR_SYNC_MAC_IRQ)
+		sc->debug.stats.istats.sync_mac_irq++;
+	if (sync_cause & AR_INTR_SYNC_EEPROM_ILLEGAL_ACCESS)
+		sc->debug.stats.istats.eeprom_illegal_access++;
+	if (sync_cause & AR_INTR_SYNC_APB_TIMEOUT)
+		sc->debug.stats.istats.apb_timeout++;
+	if (sync_cause & AR_INTR_SYNC_PCI_MODE_CONFLICT)
+		sc->debug.stats.istats.pci_mode_conflict++;
+	if (sync_cause & AR_INTR_SYNC_HOST1_FATAL)
+		sc->debug.stats.istats.host1_fatal++;
+	if (sync_cause & AR_INTR_SYNC_HOST1_PERR)
+		sc->debug.stats.istats.host1_perr++;
+	if (sync_cause & AR_INTR_SYNC_TRCV_FIFO_PERR)
+		sc->debug.stats.istats.trcv_fifo_perr++;
+	if (sync_cause & AR_INTR_SYNC_RADM_CPL_EP)
+		sc->debug.stats.istats.radm_cpl_ep++;
+	if (sync_cause & AR_INTR_SYNC_RADM_CPL_DLLP_ABORT)
+		sc->debug.stats.istats.radm_cpl_dllp_abort++;
+	if (sync_cause & AR_INTR_SYNC_RADM_CPL_TLP_ABORT)
+		sc->debug.stats.istats.radm_cpl_tlp_abort++;
+	if (sync_cause & AR_INTR_SYNC_RADM_CPL_ECRC_ERR)
+		sc->debug.stats.istats.radm_cpl_ecrc_err++;
+	if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT)
+		sc->debug.stats.istats.radm_cpl_timeout++;
+	if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT)
+		sc->debug.stats.istats.local_timeout++;
+	if (sync_cause & AR_INTR_SYNC_PM_ACCESS)
+		sc->debug.stats.istats.pm_access++;
+	if (sync_cause & AR_INTR_SYNC_MAC_AWAKE)
+		sc->debug.stats.istats.mac_awake++;
+	if (sync_cause & AR_INTR_SYNC_MAC_ASLEEP)
+		sc->debug.stats.istats.mac_asleep++;
+	if (sync_cause & AR_INTR_SYNC_MAC_SLEEP_ACCESS)
+		sc->debug.stats.istats.mac_sleep_access++;
+}
 
 static ssize_t ath9k_debugfs_read_buf(struct file *file, char __user *user_buf,
 				      size_t count, loff_t *ppos)
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 4f596ddeb15d..ec02d38ea8ea 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -295,6 +295,8 @@ void ath9k_sta_add_debugfs(struct ieee80211_hw *hw,
 void ath9k_debug_stat_ant(struct ath_softc *sc,
 			  struct ath_hw_antcomb_conf *div_ant_conf,
 			  int main_rssi_avg, int alt_rssi_avg);
+void ath9k_debug_sync_cause(struct ath_softc *sc, u32 sync_cause);
+
 #else
 
 #define RX_STAT_INC(c) /* NOP */
@@ -329,6 +331,11 @@ static inline void ath9k_debug_stat_ant(struct ath_softc *sc,
 
 }
 
+static inline void
+ath9k_debug_sync_cause(struct ath_softc *sc, u32 sync_cause)
+{
+}
+
 #endif /* CONFIG_ATH9K_DEBUGFS */
 
 #endif /* DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index 4f9378ddf07f..cc58a8ee1223 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -49,9 +49,10 @@ static inline bool ath9k_hw_calibrate(struct ath_hw *ah,
 	return ath9k_hw_ops(ah)->calibrate(ah, chan, rxchainmask, longcal);
 }
 
-static inline bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
+static inline bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked,
+				   u32 *sync_cause_p)
 {
-	return ath9k_hw_ops(ah)->get_isr(ah, masked);
+	return ath9k_hw_ops(ah)->get_isr(ah, masked, sync_cause_p);
 }
 
 static inline void ath9k_hw_set_txdesc(struct ath_hw *ah, void *ds,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 0e548a461f55..a4b1ae026216 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -85,48 +85,6 @@ static void ath9k_hw_ani_cache_ini_regs(struct ath_hw *ah)
 
 #ifdef CONFIG_ATH9K_DEBUGFS
 
-void ath9k_debug_sync_cause(struct ath_common *common, u32 sync_cause)
-{
-	struct ath_softc *sc = common->priv;
-	if (sync_cause)
-		sc->debug.stats.istats.sync_cause_all++;
-	if (sync_cause & AR_INTR_SYNC_RTC_IRQ)
-		sc->debug.stats.istats.sync_rtc_irq++;
-	if (sync_cause & AR_INTR_SYNC_MAC_IRQ)
-		sc->debug.stats.istats.sync_mac_irq++;
-	if (sync_cause & AR_INTR_SYNC_EEPROM_ILLEGAL_ACCESS)
-		sc->debug.stats.istats.eeprom_illegal_access++;
-	if (sync_cause & AR_INTR_SYNC_APB_TIMEOUT)
-		sc->debug.stats.istats.apb_timeout++;
-	if (sync_cause & AR_INTR_SYNC_PCI_MODE_CONFLICT)
-		sc->debug.stats.istats.pci_mode_conflict++;
-	if (sync_cause & AR_INTR_SYNC_HOST1_FATAL)
-		sc->debug.stats.istats.host1_fatal++;
-	if (sync_cause & AR_INTR_SYNC_HOST1_PERR)
-		sc->debug.stats.istats.host1_perr++;
-	if (sync_cause & AR_INTR_SYNC_TRCV_FIFO_PERR)
-		sc->debug.stats.istats.trcv_fifo_perr++;
-	if (sync_cause & AR_INTR_SYNC_RADM_CPL_EP)
-		sc->debug.stats.istats.radm_cpl_ep++;
-	if (sync_cause & AR_INTR_SYNC_RADM_CPL_DLLP_ABORT)
-		sc->debug.stats.istats.radm_cpl_dllp_abort++;
-	if (sync_cause & AR_INTR_SYNC_RADM_CPL_TLP_ABORT)
-		sc->debug.stats.istats.radm_cpl_tlp_abort++;
-	if (sync_cause & AR_INTR_SYNC_RADM_CPL_ECRC_ERR)
-		sc->debug.stats.istats.radm_cpl_ecrc_err++;
-	if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT)
-		sc->debug.stats.istats.radm_cpl_timeout++;
-	if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT)
-		sc->debug.stats.istats.local_timeout++;
-	if (sync_cause & AR_INTR_SYNC_PM_ACCESS)
-		sc->debug.stats.istats.pm_access++;
-	if (sync_cause & AR_INTR_SYNC_MAC_AWAKE)
-		sc->debug.stats.istats.mac_awake++;
-	if (sync_cause & AR_INTR_SYNC_MAC_ASLEEP)
-		sc->debug.stats.istats.mac_asleep++;
-	if (sync_cause & AR_INTR_SYNC_MAC_SLEEP_ACCESS)
-		sc->debug.stats.istats.mac_sleep_access++;
-}
 #endif
 
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 54932d8b5edd..6132ffeb3048 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -667,7 +667,8 @@ struct ath_hw_ops {
 			  struct ath9k_channel *chan,
 			  u8 rxchainmask,
 			  bool longcal);
-	bool (*get_isr)(struct ath_hw *ah, enum ath9k_int *masked);
+	bool (*get_isr)(struct ath_hw *ah, enum ath9k_int *masked,
+			u32 *sync_cause_p);
 	void (*set_txdesc)(struct ath_hw *ah, void *ds,
 			   struct ath_tx_info *i);
 	int (*proc_txdesc)(struct ath_hw *ah, void *ds,
@@ -994,13 +995,6 @@ bool ath9k_hw_check_alive(struct ath_hw *ah);
 
 bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
 
-#ifdef CONFIG_ATH9K_DEBUGFS
-void ath9k_debug_sync_cause(struct ath_common *common, u32 sync_cause);
-#else
-static inline void ath9k_debug_sync_cause(struct ath_common *common,
-					  u32 sync_cause) {}
-#endif
-
 /* Generic hw timer primitives */
 struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 					  void (*trigger)(void *),
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6a231201c7dc..1d76be501572 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -541,6 +541,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	enum ath9k_int status;
+	u32 sync_cause;
 	bool sched = false;
 
 	/*
@@ -567,7 +568,8 @@ irqreturn_t ath_isr(int irq, void *dev)
 	 * bits we haven't explicitly enabled so we mask the
 	 * value to insure we only process bits we requested.
 	 */
-	ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
+	ath9k_hw_getisr(ah, &status, &sync_cause); /* NB: clears ISR too */
+	ath9k_debug_sync_cause(sc, sync_cause);
 	status &= ah->imask;	/* discard unasked-for bits */
 
 	/*
-- 
cgit v1.2.3


From c32e4e518f6642372c57ac9edbfb8274fa20c5e4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Thu, 19 Dec 2013 18:01:49 +0100
Subject: ath9k: call ath9k_set_tsfadjust from ath9k_beacon_config

Make that function and ath9k_allow_beacon_config static

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  2 --
 drivers/net/wireless/ath/ath9k/beacon.c | 12 +++++++++---
 drivers/net/wireless/ath/ath9k/main.c   |  9 ++-------
 3 files changed, 11 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9ad8a6738afd..f2202e78fa7b 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -431,12 +431,10 @@ struct ath_beacon {
 };
 
 void ath9k_beacon_tasklet(unsigned long data);
-bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif);
 void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 			 u32 changed);
 void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
 void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
-void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif);
 void ath9k_set_beacon(struct ath_softc *sc);
 bool ath9k_csa_is_finished(struct ath_softc *sc);
 
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 78ffe762e26c..accfb3b60daa 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -274,7 +274,7 @@ static int ath9k_beacon_choose_slot(struct ath_softc *sc)
 	return slot;
 }
 
-void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
+static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
@@ -622,7 +622,8 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
 		set_bit(SC_OP_BEACONS, &sc->sc_flags);
 }
 
-bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
+static bool ath9k_allow_beacon_config(struct ath_softc *sc,
+				      struct ieee80211_vif *vif)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)vif->drv_priv;
@@ -693,12 +694,17 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 	unsigned long flags;
 	bool skip_beacon = false;
 
+	if (vif->type == NL80211_IFTYPE_AP)
+		ath9k_set_tsfadjust(sc, vif);
+
+	if (!ath9k_allow_beacon_config(sc, vif))
+		return;
+
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
 		ath9k_cache_beacon_config(sc, bss_conf);
 		ath9k_set_beacon(sc);
 		set_bit(SC_OP_BEACONS, &sc->sc_flags);
 		return;
-
 	}
 
 	/*
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 1d76be501572..173a889f9dbb 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1664,13 +1664,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if ((changed & BSS_CHANGED_BEACON_ENABLED) ||
-	    (changed & BSS_CHANGED_BEACON_INT)) {
-		if (ah->opmode == NL80211_IFTYPE_AP &&
-		    bss_conf->enable_beacon)
-			ath9k_set_tsfadjust(sc, vif);
-		if (ath9k_allow_beacon_config(sc, vif))
-			ath9k_beacon_config(sc, vif, changed);
-	}
+	    (changed & BSS_CHANGED_BEACON_INT))
+		ath9k_beacon_config(sc, vif, changed);
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
 		if (bss_conf->use_short_slot)
-- 
cgit v1.2.3


From 63ded3f059f5c906fdef4b7f0663fb39c4d96c8e Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Thu, 19 Dec 2013 18:01:50 +0100
Subject: ath9k: fix TSF offset precision issue

Dividing the beacon interval by ATH_BCBUF (8) truncates the result for
the default beacon interval of 100.
Fix the calculation by moving the division after conversion from TU to
microseconds.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index accfb3b60daa..112aff720e13 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -279,13 +279,14 @@ static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
 	struct ath_vif *avp = (void *)vif->drv_priv;
-	u64 tsfadjust;
+	u32 tsfadjust;
 
 	if (avp->av_bslot == 0)
 		return;
 
-	tsfadjust = cur_conf->beacon_interval * avp->av_bslot / ATH_BCBUF;
-	avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
+	tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
+	tsfadjust = TU_TO_USEC(tsfadjust) / ATH_BCBUF;
+	avp->tsf_adjust = cpu_to_le64(tsfadjust);
 
 	ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n",
 		(unsigned long long)tsfadjust, avp->av_bslot);
-- 
cgit v1.2.3


From 39731b78b4afebb7501c05b68e2443a1b250b41c Mon Sep 17 00:00:00 2001
From: Felix Fietkau
Date: Thu, 19 Dec 2013 18:01:51 +0100
Subject: ath9k: simplify/fix tx packet TID handling

mac80211 guarantees that skb->priority is set to the TID, so use it
instead of trying to parse the QoS header manually.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 24846d91554b..475433288bbe 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -174,14 +174,7 @@ static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
 static struct ath_atx_tid *
 ath_get_skb_tid(struct ath_softc *sc, struct ath_node *an, struct sk_buff *skb)
 {
-	struct ieee80211_hdr *hdr;
-	u8 tidno = 0;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	if (ieee80211_is_data_qos(hdr->frame_control))
-		tidno = ieee80211_get_qos_ctl(hdr)[0];
-
-	tidno &= IEEE80211_QOS_CTL_TID_MASK;
+	u8 tidno = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
 	return ATH_AN_2_TID(an, tidno);
 }
 
-- 
cgit v1.2.3