From b964c5ba6d52475d70e3550fbb3780ebabedf7db Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sun, 15 Nov 2015 13:34:37 +0000 Subject: leds: bcm6328: Swap LED ON and OFF definitions The values of BCM6328_LED_MODE_ON and BCM6328_LED_MODE_OFF were named for active low LEDs. These should be swapped so that they are named for the default case of active high LEDs. Signed-off-by: Simon Arlott Signed-off-by: Jacek Anaszewski --- drivers/leds/leds-bcm6328.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c index 95d0cf94089b..0329dee4687b 100644 --- a/drivers/leds/leds-bcm6328.c +++ b/drivers/leds/leds-bcm6328.c @@ -48,10 +48,10 @@ BCM6328_SERIAL_LED_SHIFT_DIR) #define BCM6328_LED_MODE_MASK 3 -#define BCM6328_LED_MODE_OFF 0 +#define BCM6328_LED_MODE_ON 0 #define BCM6328_LED_MODE_FAST 1 #define BCM6328_LED_MODE_BLINK 2 -#define BCM6328_LED_MODE_ON 3 +#define BCM6328_LED_MODE_OFF 3 #define BCM6328_LED_SHIFT(X) ((X) << 1) /** @@ -126,9 +126,9 @@ static void bcm6328_led_set(struct led_classdev *led_cdev, *(led->blink_leds) &= ~BIT(led->pin); if ((led->active_low && value == LED_OFF) || (!led->active_low && value != LED_OFF)) - bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); - else bcm6328_led_mode(led, BCM6328_LED_MODE_ON); + else + bcm6328_led_mode(led, BCM6328_LED_MODE_OFF); spin_unlock_irqrestore(led->lock, flags); } @@ -303,8 +303,8 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg, val = bcm6328_led_read(mode) >> BCM6328_LED_SHIFT(shift % 16); val &= BCM6328_LED_MODE_MASK; - if ((led->active_low && val == BCM6328_LED_MODE_ON) || - (!led->active_low && val == BCM6328_LED_MODE_OFF)) + if ((led->active_low && val == BCM6328_LED_MODE_OFF) || + (!led->active_low && val == BCM6328_LED_MODE_ON)) led->cdev.brightness = LED_FULL; else led->cdev.brightness = LED_OFF; -- cgit v1.2.3