From 97207c12780d749770825f62c292c3140e57d79c Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Thu, 13 Dec 2018 12:34:06 -0800 Subject: mmc: sdhci: Fix sdhci_do_enable_v4_mode V4_MODE is Bit-15 of SDHCI_HOST_CONTROL2 register. Need to perform word access to this register. Signed-off-by: Sowjanya Komatineni Fixes: b3f80b434f72 ("mmc: sdhci: Add sd host v4 mode") Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 451b08a818a9..df05352b6a4a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -127,12 +127,12 @@ static void sdhci_do_enable_v4_mode(struct sdhci_host *host) { u16 ctrl2; - ctrl2 = sdhci_readb(host, SDHCI_HOST_CONTROL2); + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (ctrl2 & SDHCI_CTRL_V4_MODE) return; ctrl2 |= SDHCI_CTRL_V4_MODE; - sdhci_writeb(host, ctrl2, SDHCI_HOST_CONTROL); + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); } /* -- cgit v1.2.3 From 5ccf7f5505f4c250b97d8d7ecee7397a94b637fa Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Thu, 13 Dec 2018 12:25:43 -0800 Subject: mmc: tegra: Fix for SDMMC pads autocal parsing from dt Some of the SDMMC pads auto calibration values parsed from devicetree are assigned incorrectly. This patch fixes it. Signed-off-by: Sowjanya Komatineni Acked-by: Adrian Hunter Acked-by: Thierry Reding Fixes: 51b77c8ea784 ("mmc: tegra: Program pad autocal offsets from dt") Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-tegra.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 7b95d088fdef..e6ace31e2a41 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -510,25 +510,25 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host) err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-3v3-timeout", - &autocal->pull_up_3v3); + &autocal->pull_up_3v3_timeout); if (err) autocal->pull_up_3v3_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-3v3-timeout", - &autocal->pull_down_3v3); + &autocal->pull_down_3v3_timeout); if (err) autocal->pull_down_3v3_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-1v8-timeout", - &autocal->pull_up_1v8); + &autocal->pull_up_1v8_timeout); if (err) autocal->pull_up_1v8_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-1v8-timeout", - &autocal->pull_down_1v8); + &autocal->pull_down_1v8_timeout); if (err) autocal->pull_down_1v8_timeout = 0; -- cgit v1.2.3 From 0b479790684192ab7024ce6a621f93f6d0a64d92 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Dec 2018 14:41:31 +0000 Subject: mmc: omap_hsmmc: fix DMA API warning While booting with rootfs on MMC, the following warning is encountered on OMAP4430: omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536] This is because the DMA engine has a default maximum segment size of 64K but HSMMC sets: mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; which ends up telling the block layer that we support a maximum segment size of 65535*512, which exceeds the advertised DMA engine capabilities. Fix this by clamping the maximum segment size to the lower of the maximum request size and of the DMA engine device used for either DMA channel. Signed-off-by: Russell King Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 467d889a1638..3f4ea8f624be 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1909,7 +1909,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; - mmc->max_seg_size = mmc->max_req_size; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23; @@ -1939,6 +1938,17 @@ static int omap_hsmmc_probe(struct platform_device *pdev) goto err_irq; } + /* + * Limit the maximum segment size to the lower of the request size + * and the DMA engine device segment size limits. In reality, with + * 32-bit transfers, the DMA engine can do longer segments than this + * but there is no way to represent that in the DMA model - if we + * increase this figure here, we get warnings from the DMA API debug. + */ + mmc->max_seg_size = min3(mmc->max_req_size, + dma_get_max_seg_size(host->rx_chan->device->dev), + dma_get_max_seg_size(host->tx_chan->device->dev)); + /* Request IRQ for MMC operations */ ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0, mmc_hostname(mmc), host); -- cgit v1.2.3 From a0741ba40a009f97c019ae7541dc61c1fdf41efb Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 10 Dec 2018 17:52:36 +0100 Subject: mmc: core: Reset HPI enabled state during re-init and in case of errors During a re-initialization of the eMMC card, we may fail to re-enable HPI. In these cases, that isn't properly reflected in the card->ext_csd.hpi_en bit, as it keeps being set. This may cause following attempts to use HPI, even if's not enabled. Let's fix this! Fixes: eb0d8f135b67 ("mmc: core: support HPI send command") Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index bc1bd2c25613..f0e8e39a7938 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1782,9 +1782,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (err) { pr_warn("%s: Enabling HPI failed\n", mmc_hostname(card->host)); + card->ext_csd.hpi_en = 0; err = 0; - } else + } else { card->ext_csd.hpi_en = 1; + } } /* -- cgit v1.2.3 From ba9f39a785a9977e72233000711ef1eb48203551 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 10 Dec 2018 17:52:37 +0100 Subject: mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards"), then intent was to prevent HPI from being used for some eMMC cards, which didn't properly support it. However, that went too far, as even BKOPS and CACHE ctrl became prevented. Let's restore those parts and allow BKOPS and CACHE ctrl even if HPI isn't supported. Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards") Cc: Pratibhasagar V Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f0e8e39a7938..a9b6e64cdcd7 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -526,8 +526,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->cid.year += 16; /* check whether the eMMC card supports BKOPS */ - if (!mmc_card_broken_hpi(card) && - ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { card->ext_csd.bkops = 1; card->ext_csd.man_bkops_en = (ext_csd[EXT_CSD_BKOPS_EN] & @@ -1793,8 +1792,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If cache size is higher than 0, this indicates * the existence of cache and it can be turned on. */ - if (!mmc_card_broken_hpi(card) && - card->ext_csd.cache_size > 0) { + if (card->ext_csd.cache_size > 0) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CACHE_CTRL, 1, card->ext_csd.generic_cmd6_time); -- cgit v1.2.3 From e3ae3401aa19432ee4943eb0bbc2ec704d07d793 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 10 Dec 2018 17:52:38 +0100 Subject: mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl Some eMMCs from Micron have been reported to need ~800 ms timeout, while enabling the CACHE ctrl after running sudden power failure tests. The needed timeout is greater than what the card specifies as its generic CMD6 timeout, through the EXT_CSD register, hence the problem. Normally we would introduce a card quirk to extend the timeout for these specific Micron cards. However, due to the rather complicated debug process needed to find out the error, let's simply use a minimum timeout of 1600ms, the double of what has been reported, for all cards when enabling CACHE ctrl. Reported-by: Sjoerd Simons Reported-by: Andreas Dannenberg Reported-by: Faiz Abbas Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a9b6e64cdcd7..55997cf84b39 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -30,6 +30,7 @@ #include "pwrseq.h" #define DEFAULT_CMD6_TIMEOUT_MS 500 +#define MIN_CACHE_EN_TIMEOUT_MS 1600 static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, @@ -1789,13 +1790,18 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * If cache size is higher than 0, this indicates - * the existence of cache and it can be turned on. + * If cache size is higher than 0, this indicates the existence of cache + * and it can be turned on. Note that some eMMCs from Micron has been + * reported to need ~800 ms timeout, while enabling the cache after + * sudden power failure tests. Let's extend the timeout to a minimum of + * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards. */ if (card->ext_csd.cache_size > 0) { + unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS; + + timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_CACHE_CTRL, 1, - card->ext_csd.generic_cmd6_time); + EXT_CSD_CACHE_CTRL, 1, timeout_ms); if (err && err != -EBADMSG) goto free_card; -- cgit v1.2.3