From d6c9bc1ed4301cbc3df4565ff5348b64bf2a767c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 27 Sep 2007 12:32:44 -0700 Subject: sky2: FE+ vlan workaround The FE+ workaround means the driver can no longer trust the status register to indicate VLAN tagged frames. The fix for this is to just disable VLAN acceleration for that chip version. Tested and works fine. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a3de0b6127eb..3bfc9d3e3c6e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3970,8 +3970,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->features |= NETIF_F_HIGHDMA; #ifdef SKY2_VLAN_TAG_USED - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->vlan_rx_register = sky2_vlan_rx_register; + /* The workaround for FE+ status conflicts with VLAN tag detection. */ + if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && + sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = sky2_vlan_rx_register; + } #endif /* read the mac address */ -- cgit v1.2.3