From e3215f0ac77ec23b052cb0bf511143038ac2ad7b Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Tue, 28 Oct 2014 05:50:03 +0000 Subject: ixgbe: fix race when setting advertised speed Following commands: modprobe ixgbe ifconfig ethX up ethtool -s ethX advertise 0x020 can lead to "setup link failed with code -14" error due to the setup_link call racing with the SFP detection routine in the watchdog. This patch resolves this issue by protecting the setup_link call with check for __IXGBE_IN_SFP_INIT. Reported-by: Scott Harrison Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 3ce4a258f945..0ae038b9af90 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -342,12 +342,16 @@ static int ixgbe_set_settings(struct net_device *netdev, if (old == advertised) return err; /* this sets the link speed and restarts auto-neg */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + hw->mac.autotry_restart = true; err = hw->mac.ops.setup_link(hw, advertised, true); if (err) { e_info(probe, "setup link failed with code %d\n", err); hw->mac.ops.setup_link(hw, old, true); } + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); } else { /* in this case we currently only support 10Gb/FULL */ u32 speed = ethtool_cmd_speed(ecmd); -- cgit v1.2.3