From b6c159a9cb69c2cf0bf59d4e12c3a2da77e4d994 Mon Sep 17 00:00:00 2001 From: Stephen Douthit Date: Mon, 7 Aug 2017 17:10:59 -0400 Subject: i2c: ismt: Don't duplicate the receive length for block reads According to Table 15-14 of the C2000 EDS (Intel doc #510524) the rx data pointed to by the descriptor dptr contains the byte count. desc->rxbytes reports all bytes read on the wire, including the "byte count" byte. So if a device sends 4 bytes in response to a block read, on the wire and in the DMA buffer we see: count data1 data2 data3 data4 0x04 0xde 0xad 0xbe 0xef That's what we want to return in data->block to the next level. Instead we were actually prefixing that with desc->rxbytes: bad count count data1 data2 data3 data4 0x05 0x04 0xde 0xad 0xbe 0xef This was discovered while developing a BMC solution relying on the ipmi_ssif.c driver which was trying to interpret the bogus length field as part of the IPMI response. Signed-off-by: Stephen Douthit Tested-by: Dan Priamo Acked-by: Neil Horman Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-ismt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index e98e44e584a4..9af2337eb17a 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -341,8 +341,8 @@ static int ismt_process_desc(const struct ismt_desc *desc, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: - memcpy(&data->block[1], dma_buffer, desc->rxbytes); - data->block[0] = desc->rxbytes; + memcpy(data->block, dma_buffer, desc->rxbytes); + data->block[0] = desc->rxbytes - 1; break; } return 0; -- cgit v1.2.3 From ba201c4f5ebe13d7819081756378777d8153f23e Mon Sep 17 00:00:00 2001 From: Stephen Douthit Date: Mon, 7 Aug 2017 17:11:00 -0400 Subject: i2c: ismt: Return EMSGSIZE for block reads with bogus length Compare the number of bytes actually seen on the wire to the byte count field returned by the slave device. Previously we just overwrote the byte count returned by the slave with the real byte count and let the caller figure out if the message was sane. Signed-off-by: Stephen Douthit Tested-by: Dan Priamo Acked-by: Neil Horman Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-ismt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 9af2337eb17a..22ffcb73c185 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -341,8 +341,10 @@ static int ismt_process_desc(const struct ismt_desc *desc, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: + if (desc->rxbytes != dma_buffer[0] + 1) + return -EMSGSIZE; + memcpy(data->block, dma_buffer, desc->rxbytes); - data->block[0] = desc->rxbytes - 1; break; } return 0; -- cgit v1.2.3 From 231d069fcde22bd0582c2c9564f1b334d280c7d7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 29 Aug 2017 14:08:35 +0200 Subject: i2c: designware: Round down ACPI provided clk to nearest supported clk The Lenovo Miix2 8 DSDT contains an i2c clk / bus speed of 1700000 Hz for one if its devices, which is not supported. This is the second DSDT to show up with an unsupported clk in a short time, remove the hardcoded fix for DSDTs with a 1 MiHz clock and simply always round down the clk to the nearest supported value. Reported-by: russianneuromancer@ya.ru Fixes: 682c6c2188 ("i2c: designware: Some broken DSTDs use 1MiHz ...") Signed-off-by: Hans de Goede Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 57248bccadbc..2b98a173136f 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -256,7 +256,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) struct dw_i2c_dev *dev; u32 acpi_speed, ht = 0; struct resource *mem; - int irq, ret; + int i, irq, ret; + const int supported_speeds[] = { 0, 100000, 400000, 1000000, 3400000 }; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -297,9 +298,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) } acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev); - /* Some broken DSTDs use 1MiHz instead of 1MHz */ - if (acpi_speed == 1048576) - acpi_speed = 1000000; + /* + * Some DSTDs use a non standard speed, round down to the lowest + * standard speed. + */ + for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) { + if (acpi_speed < supported_speeds[i]) + break; + } + acpi_speed = supported_speeds[i - 1]; + /* * Find bus speed from the "clock-frequency" device property, ACPI * or by using fast mode if neither is set. -- cgit v1.2.3