From 91954c6c904b515baafaee6a1f35c94409a3bb68 Mon Sep 17 00:00:00 2001
From: Daniel Gomez
Date: Sun, 25 Sep 2022 23:53:13 +0200
Subject: drm/amd/display: Fix mutex lock in dcn10
Removal of DC_FP_* wrappers from dml (9696679bf7ac) provokes a mutex
lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid
locking the mutex by placing the DC_FP_* wrappers around the proper
functions.
This fixes the following WARN/stacktrace:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd
preempt_count: 1, expected: 0
CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2
Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021
Call Trace:
dump_stack_lvl+0x33/0x42
__might_resched.cold.172+0xa5/0xb3
mutex_lock+0x1a/0x40
amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu]
dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu]
dcn_bw_update_from_pplib+0x70/0x340 [amdgpu]
dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu]
? __kmalloc+0x1c7/0x4a0
dc_create_resource_pool+0xe7/0x190 [amdgpu]
dc_create+0x212/0x5d0 [amdgpu]
amdgpu_dm_init+0x246/0x370 [amdgpu]
? schedule_hrtimeout_range_clock+0x93/0x120
? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu]
dm_hw_init+0xe/0x20 [amdgpu]
amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu]
? pci_bus_read_config_word+0x43/0x80
amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
amdgpu_pci_probe+0x116/0x320 [amdgpu]
pci_device_probe+0x97/0x110
really_probe+0xdd/0x340
__driver_probe_device+0x80/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xdc/0x180
? __device_attach_driver+0x100/0x100
? __device_attach_driver+0x100/0x100
bus_for_each_dev+0x74/0xc0
bus_add_driver+0x19e/0x210
? kset_find_obj+0x30/0xa0
? 0xffffffffa0a5b000
driver_register+0x6b/0xc0
? 0xffffffffa0a5b000
do_one_initcall+0x4a/0x1f0
? __vunmap+0x28e/0x2f0
? __cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x3d/0x440
do_init_module+0x4a/0x1e0
load_module+0x1cba/0x1e10
? __do_sys_finit_module+0xb7/0x120
__do_sys_finit_module+0xb7/0x120
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff2b5f5422d
Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d
RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019
RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240
R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000
Fixes: 9696679bf7ac ("drm/amd/display: remove DC_FP_* wrapper from dml folder")
Reviewed-by: Hamza Mahfooz
Tested-by: Daniel Wheeler
Signed-off-by: Daniel Gomez
Signed-off-by: Alex Deucher
---
.../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 12 ++-
.../gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 66 +++++++++++-
.../gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c | 118 +++++++++------------
drivers/gpu/drm/amd/display/dc/inc/dcn_calcs.h | 19 +++-
4 files changed, 138 insertions(+), 77 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 72521749c01d..4390f6d7050f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3005,6 +3005,7 @@ void dcn10_prepare_bandwidth(
{
struct dce_hwseq *hws = dc->hwseq;
struct hubbub *hubbub = dc->res_pool->hubbub;
+ int min_fclk_khz, min_dcfclk_khz, socclk_khz;
if (dc->debug.sanity_checks)
hws->funcs.verify_allow_pstate_change_high(dc);
@@ -3027,8 +3028,11 @@ void dcn10_prepare_bandwidth(
if (dc->debug.pplib_wm_report_mode == WM_REPORT_OVERRIDE) {
DC_FP_START();
- dcn_bw_notify_pplib_of_wm_ranges(dc);
+ dcn_get_soc_clks(
+ dc, &min_fclk_khz, &min_dcfclk_khz, &socclk_khz);
DC_FP_END();
+ dcn_bw_notify_pplib_of_wm_ranges(
+ dc, min_fclk_khz, min_dcfclk_khz, socclk_khz);
}
if (dc->debug.sanity_checks)
@@ -3041,6 +3045,7 @@ void dcn10_optimize_bandwidth(
{
struct dce_hwseq *hws = dc->hwseq;
struct hubbub *hubbub = dc->res_pool->hubbub;
+ int min_fclk_khz, min_dcfclk_khz, socclk_khz;
if (dc->debug.sanity_checks)
hws->funcs.verify_allow_pstate_change_high(dc);
@@ -3064,8 +3069,11 @@ void dcn10_optimize_bandwidth(
if (dc->debug.pplib_wm_report_mode == WM_REPORT_OVERRIDE) {
DC_FP_START();
- dcn_bw_notify_pplib_of_wm_ranges(dc);
+ dcn_get_soc_clks(
+ dc, &min_fclk_khz, &min_dcfclk_khz, &socclk_khz);
DC_FP_END();
+ dcn_bw_notify_pplib_of_wm_ranges(
+ dc, min_fclk_khz, min_dcfclk_khz, socclk_khz);
}
if (dc->debug.sanity_checks)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
index 831080b9eb87..56d30baf12df 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
@@ -1336,6 +1336,21 @@ static noinline void dcn10_resource_construct_fp(
}
}
+static bool verify_clock_values(struct dm_pp_clock_levels_with_voltage *clks)
+{
+ int i;
+
+ if (clks->num_levels == 0)
+ return false;
+
+ for (i = 0; i < clks->num_levels; i++)
+ /* Ensure that the result is sane */
+ if (clks->data[i].clocks_in_khz == 0)
+ return false;
+
+ return true;
+}
+
static bool dcn10_resource_construct(
uint8_t num_virtual_links,
struct dc *dc,
@@ -1345,6 +1360,9 @@ static bool dcn10_resource_construct(
int j;
struct dc_context *ctx = dc->ctx;
uint32_t pipe_fuses = read_pipe_fuses(ctx);
+ struct dm_pp_clock_levels_with_voltage fclks = {0}, dcfclks = {0};
+ int min_fclk_khz, min_dcfclk_khz, socclk_khz;
+ bool res;
ctx->dc_bios->regs = &bios_regs;
@@ -1523,15 +1541,53 @@ static bool dcn10_resource_construct(
&& pool->base.pp_smu->rv_funcs.set_pme_wa_enable != NULL)
dc->debug.az_endpoint_mute_only = false;
- DC_FP_START();
- if (!dc->debug.disable_pplib_clock_request)
- dcn_bw_update_from_pplib(dc);
+
+ if (!dc->debug.disable_pplib_clock_request) {
+ /*
+ * TODO: This is not the proper way to obtain
+ * fabric_and_dram_bandwidth, should be min(fclk, memclk).
+ */
+ res = dm_pp_get_clock_levels_by_type_with_voltage(
+ ctx, DM_PP_CLOCK_TYPE_FCLK, &fclks);
+
+ DC_FP_START();
+
+ if (res)
+ res = verify_clock_values(&fclks);
+
+ if (res)
+ dcn_bw_update_from_pplib_fclks(dc, &fclks);
+ else
+ BREAK_TO_DEBUGGER();
+
+ DC_FP_END();
+
+ res = dm_pp_get_clock_levels_by_type_with_voltage(
+ ctx, DM_PP_CLOCK_TYPE_DCFCLK, &dcfclks);
+
+ DC_FP_START();
+
+ if (res)
+ res = verify_clock_values(&dcfclks);
+
+ if (res)
+ dcn_bw_update_from_pplib_dcfclks(dc, &dcfclks);
+ else
+ BREAK_TO_DEBUGGER();
+
+ DC_FP_END();
+ }
+
dcn_bw_sync_calcs_and_dml(dc);
if (!dc->debug.disable_pplib_wm_range) {
dc->res_pool = &pool->base;
- dcn_bw_notify_pplib_of_wm_ranges(dc);
+ DC_FP_START();
+ dcn_get_soc_clks(
+ dc, &min_fclk_khz, &min_dcfclk_khz, &socclk_khz);
+ DC_FP_END();
+ dcn_bw_notify_pplib_of_wm_ranges(
+ dc, min_fclk_khz, min_dcfclk_khz, socclk_khz);
}
- DC_FP_END();
{
struct irq_service_init_data init_data;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c b/drivers/gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c
index d46adc849d2a..e73f089c84bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c
@@ -1444,81 +1444,67 @@ unsigned int dcn_find_dcfclk_suits_all(
return dcf_clk;
}
-static bool verify_clock_values(struct dm_pp_clock_levels_with_voltage *clks)
+void dcn_bw_update_from_pplib_fclks(
+ struct dc *dc,
+ struct dm_pp_clock_levels_with_voltage *fclks)
{
- int i;
-
- if (clks->num_levels == 0)
- return false;
-
- for (i = 0; i < clks->num_levels; i++)
- /* Ensure that the result is sane */
- if (clks->data[i].clocks_in_khz == 0)
- return false;
+ unsigned vmin0p65_idx, vmid0p72_idx, vnom0p8_idx, vmax0p9_idx;
- return true;
+ ASSERT(fclks->num_levels);
+
+ vmin0p65_idx = 0;
+ vmid0p72_idx = fclks->num_levels -
+ (fclks->num_levels > 2 ? 3 : (fclks->num_levels > 1 ? 2 : 1));
+ vnom0p8_idx = fclks->num_levels - (fclks->num_levels > 1 ? 2 : 1);
+ vmax0p9_idx = fclks->num_levels - 1;
+
+ dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 =
+ 32 * (fclks->data[vmin0p65_idx].clocks_in_khz / 1000.0) / 1000.0;
+ dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 =
+ dc->dcn_soc->number_of_channels *
+ (fclks->data[vmid0p72_idx].clocks_in_khz / 1000.0)
+ * ddr4_dram_factor_single_Channel / 1000.0;
+ dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 =
+ dc->dcn_soc->number_of_channels *
+ (fclks->data[vnom0p8_idx].clocks_in_khz / 1000.0)
+ * ddr4_dram_factor_single_Channel / 1000.0;
+ dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 =
+ dc->dcn_soc->number_of_channels *
+ (fclks->data[vmax0p9_idx].clocks_in_khz / 1000.0)
+ * ddr4_dram_factor_single_Channel / 1000.0;
}
-void dcn_bw_update_from_pplib(struct dc *dc)
+void dcn_bw_update_from_pplib_dcfclks(
+ struct dc *dc,
+ struct dm_pp_clock_levels_with_voltage *dcfclks)
{
- struct dc_context *ctx = dc->ctx;
- struct dm_pp_clock_levels_with_voltage fclks = {0}, dcfclks = {0};
- bool res;
- unsigned vmin0p65_idx, vmid0p72_idx, vnom0p8_idx, vmax0p9_idx;
-
- /* TODO: This is not the proper way to obtain fabric_and_dram_bandwidth, should be min(fclk, memclk) */
- res = dm_pp_get_clock_levels_by_type_with_voltage(
- ctx, DM_PP_CLOCK_TYPE_FCLK, &fclks);
-
- if (res)
- res = verify_clock_values(&fclks);
-
- if (res) {
- ASSERT(fclks.num_levels);
-
- vmin0p65_idx = 0;
- vmid0p72_idx = fclks.num_levels -
- (fclks.num_levels > 2 ? 3 : (fclks.num_levels > 1 ? 2 : 1));
- vnom0p8_idx = fclks.num_levels - (fclks.num_levels > 1 ? 2 : 1);
- vmax0p9_idx = fclks.num_levels - 1;
-
- dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 =
- 32 * (fclks.data[vmin0p65_idx].clocks_in_khz / 1000.0) / 1000.0;
- dc->dcn_soc->fabric_and_dram_bandwidth_vmid0p72 =
- dc->dcn_soc->number_of_channels *
- (fclks.data[vmid0p72_idx].clocks_in_khz / 1000.0)
- * ddr4_dram_factor_single_Channel / 1000.0;
- dc->dcn_soc->fabric_and_dram_bandwidth_vnom0p8 =
- dc->dcn_soc->number_of_channels *
- (fclks.data[vnom0p8_idx].clocks_in_khz / 1000.0)
- * ddr4_dram_factor_single_Channel / 1000.0;
- dc->dcn_soc->fabric_and_dram_bandwidth_vmax0p9 =
- dc->dcn_soc->number_of_channels *
- (fclks.data[vmax0p9_idx].clocks_in_khz / 1000.0)
- * ddr4_dram_factor_single_Channel / 1000.0;
- } else
- BREAK_TO_DEBUGGER();
-
- res = dm_pp_get_clock_levels_by_type_with_voltage(
- ctx, DM_PP_CLOCK_TYPE_DCFCLK, &dcfclks);
-
- if (res)
- res = verify_clock_values(&dcfclks);
+ if (dcfclks->num_levels >= 3) {
+ dc->dcn_soc->dcfclkv_min0p65 = dcfclks->data[0].clocks_in_khz / 1000.0;
+ dc->dcn_soc->dcfclkv_mid0p72 = dcfclks->data[dcfclks->num_levels - 3].clocks_in_khz / 1000.0;
+ dc->dcn_soc->dcfclkv_nom0p8 = dcfclks->data[dcfclks->num_levels - 2].clocks_in_khz / 1000.0;
+ dc->dcn_soc->dcfclkv_max0p9 = dcfclks->data[dcfclks->num_levels - 1].clocks_in_khz / 1000.0;
+ }
+}
- if (res && dcfclks.num_levels >= 3) {
- dc->dcn_soc->dcfclkv_min0p65 = dcfclks.data[0].clocks_in_khz / 1000.0;
- dc->dcn_soc->dcfclkv_mid0p72 = dcfclks.data[dcfclks.num_levels - 3].clocks_in_khz / 1000.0;
- dc->dcn_soc->dcfclkv_nom0p8 = dcfclks.data[dcfclks.num_levels - 2].clocks_in_khz / 1000.0;
- dc->dcn_soc->dcfclkv_max0p9 = dcfclks.data[dcfclks.num_levels - 1].clocks_in_khz / 1000.0;
- } else
- BREAK_TO_DEBUGGER();
+void dcn_get_soc_clks(
+ struct dc *dc,
+ int *min_fclk_khz,
+ int *min_dcfclk_khz,
+ int *socclk_khz)
+{
+ *min_fclk_khz = dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 * 1000000 / 32;
+ *min_dcfclk_khz = dc->dcn_soc->dcfclkv_min0p65 * 1000;
+ *socclk_khz = dc->dcn_soc->socclk * 1000;
}
-void dcn_bw_notify_pplib_of_wm_ranges(struct dc *dc)
+void dcn_bw_notify_pplib_of_wm_ranges(
+ struct dc *dc,
+ int min_fclk_khz,
+ int min_dcfclk_khz,
+ int socclk_khz)
{
struct pp_smu_funcs_rv *pp = NULL;
struct pp_smu_wm_range_sets ranges = {0};
- int min_fclk_khz, min_dcfclk_khz, socclk_khz;
const int overdrive = 5000000; /* 5 GHz to cover Overdrive */
if (dc->res_pool->pp_smu)
@@ -1526,10 +1512,6 @@ void dcn_bw_notify_pplib_of_wm_ranges(struct dc *dc)
if (!pp || !pp->set_wm_ranges)
return;
- min_fclk_khz = dc->dcn_soc->fabric_and_dram_bandwidth_vmin0p65 * 1000000 / 32;
- min_dcfclk_khz = dc->dcn_soc->dcfclkv_min0p65 * 1000;
- socclk_khz = dc->dcn_soc->socclk * 1000;
-
/* Now notify PPLib/SMU about which Watermarks sets they should select
* depending on DPM state they are in. And update BW MGR GFX Engine and
* Memory clock member variables for Watermarks calculations for each
diff --git a/drivers/gpu/drm/amd/display/dc/inc/dcn_calcs.h b/drivers/gpu/drm/amd/display/dc/inc/dcn_calcs.h
index 806f3041db14..9e4ddc985240 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/dcn_calcs.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/dcn_calcs.h
@@ -628,8 +628,23 @@ unsigned int dcn_find_dcfclk_suits_all(
const struct dc *dc,
struct dc_clocks *clocks);
-void dcn_bw_update_from_pplib(struct dc *dc);
-void dcn_bw_notify_pplib_of_wm_ranges(struct dc *dc);
+void dcn_get_soc_clks(
+ struct dc *dc,
+ int *min_fclk_khz,
+ int *min_dcfclk_khz,
+ int *socclk_khz);
+
+void dcn_bw_update_from_pplib_fclks(
+ struct dc *dc,
+ struct dm_pp_clock_levels_with_voltage *fclks);
+void dcn_bw_update_from_pplib_dcfclks(
+ struct dc *dc,
+ struct dm_pp_clock_levels_with_voltage *dcfclks);
+void dcn_bw_notify_pplib_of_wm_ranges(
+ struct dc *dc,
+ int min_fclk_khz,
+ int min_dcfclk_khz,
+ int socclk_khz);
void dcn_bw_sync_calcs_and_dml(struct dc *dc);
enum source_macro_tile_size swizzle_mode_to_macro_tile_size(enum swizzle_mode_values sw_mode);
--
cgit v1.2.3
From 8ab1d7a27eff87001ebd0977db600e4187f63f78 Mon Sep 17 00:00:00 2001
From: Alvin Lee
Date: Wed, 17 Aug 2022 10:47:59 -0400
Subject: drm/amd/display: Only commit SubVP state after pipe programming
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei
Acked-by: Brian Chang
Signed-off-by: Alvin Lee
Tested-by: Daniel Wheeler
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +++
1 file changed, 3 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 258ba5a872b1..ccaa43d071cf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3495,6 +3495,9 @@ static void commit_planes_for_stream(struct dc *dc,
if (update_type != UPDATE_TYPE_FAST)
dc->hwss.post_unlock_program_front_end(dc, context);
+ if (update_type != UPDATE_TYPE_FAST)
+ if (dc->hwss.commit_subvp_config)
+ dc->hwss.commit_subvp_config(dc, context);
if (update_type != UPDATE_TYPE_FAST)
if (dc->hwss.commit_subvp_config)
--
cgit v1.2.3
From d37f379ad04dcc21ebd1d2380c3bc979d54f7c46 Mon Sep 17 00:00:00 2001
From: Yang Yingliang
Date: Thu, 29 Sep 2022 17:02:00 +0800
Subject: drm/amd/display: change to enc314_stream_encoder_dp_blank static
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.
Fixes: c55bf690fe79 ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
index 0d2ffb692957..7e773bf7b895 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
@@ -262,7 +262,7 @@ static bool is_two_pixels_per_containter(const struct dc_crtc_timing *timing)
return two_pix;
}
-void enc314_stream_encoder_dp_blank(
+static void enc314_stream_encoder_dp_blank(
struct dc_link *link,
struct stream_encoder *enc)
{
--
cgit v1.2.3
From 8abbc4f768ddc5c2190ab8966e529cec42b4b2d4 Mon Sep 17 00:00:00 2001
From: Li Zhong
Date: Sat, 24 Sep 2022 15:19:39 -0700
Subject: drivers/amd/pm: check the return value of amdgpu_bo_kmap
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the
error check and propagate the error.
Signed-off-by: Li Zhong
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/pm/legacy-dpm/kv_dpm.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/kv_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/kv_dpm.c
index 8fd0782a2b20..f5e08b60f66e 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/kv_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/kv_dpm.c
@@ -1384,13 +1384,16 @@ static int kv_dpm_enable(struct amdgpu_device *adev)
static void kv_dpm_disable(struct amdgpu_device *adev)
{
struct kv_power_info *pi = kv_get_pi(adev);
+ int err;
amdgpu_irq_put(adev, &adev->pm.dpm.thermal.irq,
AMDGPU_THERMAL_IRQ_LOW_TO_HIGH);
amdgpu_irq_put(adev, &adev->pm.dpm.thermal.irq,
AMDGPU_THERMAL_IRQ_HIGH_TO_LOW);
- amdgpu_kv_smc_bapm_enable(adev, false);
+ err = amdgpu_kv_smc_bapm_enable(adev, false);
+ if (err)
+ DRM_ERROR("amdgpu_kv_smc_bapm_enable failed\n");
if (adev->asic_type == CHIP_MULLINS)
kv_enable_nb_dpm(adev, false);
--
cgit v1.2.3
From f7367b5fe0e38af02d6915a355f2ee63b172c9ac Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Mon, 19 Sep 2022 10:29:24 -0400
Subject: drm/amd/display: Program SubVP in dc_commit_state_no_check
[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.
[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: Alvin Lee
Acked-by: Hamza Mahfooz
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index ccaa43d071cf..4ba2c1f95dcb 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1734,10 +1734,20 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
int i, k, l;
struct dc_stream_state *dc_streams[MAX_STREAMS] = {0};
struct dc_state *old_state;
+ bool subvp_prev_use = false;
dc_z10_restore(dc);
dc_allow_idle_optimizations(dc, false);
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *old_pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+
+ /* Check old context for SubVP */
+ subvp_prev_use |= (old_pipe->stream && old_pipe->stream->mall_stream_config.type == SUBVP_PHANTOM);
+ if (subvp_prev_use)
+ break;
+ }
+
for (i = 0; i < context->stream_count; i++)
dc_streams[i] = context->streams[i];
@@ -1777,6 +1787,9 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
dc->hwss.wait_for_mpcc_disconnect(dc, dc->res_pool, pipe);
}
+ if (dc->hwss.subvp_pipe_control_lock)
+ dc->hwss.subvp_pipe_control_lock(dc, context, true, true, NULL, subvp_prev_use);
+
result = dc->hwss.apply_ctx_to_hw(dc, context);
if (result != DC_OK) {
@@ -1794,6 +1807,12 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
dc->hwss.interdependent_update_lock(dc, context, false);
dc->hwss.post_unlock_program_front_end(dc, context);
}
+
+ if (dc->hwss.commit_subvp_config)
+ dc->hwss.commit_subvp_config(dc, context);
+ if (dc->hwss.subvp_pipe_control_lock)
+ dc->hwss.subvp_pipe_control_lock(dc, context, false, true, NULL, subvp_prev_use);
+
for (i = 0; i < context->stream_count; i++) {
const struct dc_link *link = context->streams[i]->link;
--
cgit v1.2.3
From c1969fbaa57d88ddef626bb8ae313d38478d8631 Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Mon, 19 Sep 2022 13:14:02 -0400
Subject: drm/amd/display: Reorder FCLK P-state switch sequence for DCN32
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee
Acked-by: Hamza Mahfooz
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
.../amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 44 +++++++++++-----------
1 file changed, 23 insertions(+), 21 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
index f0f3f66629cc..96d5e0d5b3ce 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c
@@ -333,6 +333,21 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
if (enter_display_off == safe_to_lower)
dcn30_smu_set_num_of_displays(clk_mgr, display_count);
+ clk_mgr_base->clks.fclk_prev_p_state_change_support = clk_mgr_base->clks.fclk_p_state_change_support;
+
+ total_plane_count = clk_mgr_helper_get_active_plane_cnt(dc, context);
+ fclk_p_state_change_support = new_clocks->fclk_p_state_change_support || (total_plane_count == 0);
+
+ if (should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_p_state_change_support)) {
+ clk_mgr_base->clks.fclk_p_state_change_support = fclk_p_state_change_support;
+
+ /* To enable FCLK P-state switching, send FCLK_PSTATE_NOTSUPPORTED message to PMFW */
+ if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 && clk_mgr_base->clks.fclk_p_state_change_support && update_fclk) {
+ /* Handle the code for sending a message to PMFW that FCLK P-state change is supported */
+ dcn32_smu_send_fclk_pstate_message(clk_mgr, FCLK_PSTATE_SUPPORTED);
+ }
+ }
+
if (dc->debug.force_min_dcfclk_mhz > 0)
new_clocks->dcfclk_khz = (new_clocks->dcfclk_khz > (dc->debug.force_min_dcfclk_mhz * 1000)) ?
new_clocks->dcfclk_khz : (dc->debug.force_min_dcfclk_mhz * 1000);
@@ -352,7 +367,6 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
clk_mgr_base->clks.socclk_khz = new_clocks->socclk_khz;
clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support;
- clk_mgr_base->clks.fclk_prev_p_state_change_support = clk_mgr_base->clks.fclk_p_state_change_support;
clk_mgr_base->clks.prev_num_ways = clk_mgr_base->clks.num_ways;
if (clk_mgr_base->clks.num_ways != new_clocks->num_ways &&
@@ -361,9 +375,8 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
dcn32_smu_send_cab_for_uclk_message(clk_mgr, clk_mgr_base->clks.num_ways);
}
- total_plane_count = clk_mgr_helper_get_active_plane_cnt(dc, context);
+
p_state_change_support = new_clocks->p_state_change_support || (total_plane_count == 0);
- fclk_p_state_change_support = new_clocks->fclk_p_state_change_support || (total_plane_count == 0);
if (should_update_pstate_support(safe_to_lower, p_state_change_support, clk_mgr_base->clks.p_state_change_support)) {
clk_mgr_base->clks.p_state_change_support = p_state_change_support;
@@ -373,15 +386,14 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
clk_mgr_base->bw_params->clk_table.entries[clk_mgr_base->bw_params->clk_table.num_entries - 1].memclk_mhz);
}
- if (should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_p_state_change_support) &&
- clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21) {
- clk_mgr_base->clks.fclk_p_state_change_support = fclk_p_state_change_support;
+ /* Always update saved value, even if new value not set due to P-State switching unsupported. Also check safe_to_lower for FCLK */
+ if (safe_to_lower && (clk_mgr_base->clks.fclk_p_state_change_support != clk_mgr_base->clks.fclk_prev_p_state_change_support)) {
+ update_fclk = true;
+ }
- /* To disable FCLK P-state switching, send FCLK_PSTATE_NOTSUPPORTED message to PMFW */
- if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 && !clk_mgr_base->clks.fclk_p_state_change_support) {
- /* Handle code for sending a message to PMFW that FCLK P-state change is not supported */
- dcn32_smu_send_fclk_pstate_message(clk_mgr, FCLK_PSTATE_NOTSUPPORTED);
- }
+ if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 && !clk_mgr_base->clks.fclk_p_state_change_support && update_fclk) {
+ /* Handle code for sending a message to PMFW that FCLK P-state change is not supported */
+ dcn32_smu_send_fclk_pstate_message(clk_mgr, FCLK_PSTATE_NOTSUPPORTED);
}
/* Always update saved value, even if new value not set due to P-State switching unsupported */
@@ -390,21 +402,11 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base,
update_uclk = true;
}
- /* Always update saved value, even if new value not set due to P-State switching unsupported. Also check safe_to_lower for FCLK */
- if (safe_to_lower && (clk_mgr_base->clks.fclk_p_state_change_support != clk_mgr_base->clks.fclk_prev_p_state_change_support)) {
- update_fclk = true;
- }
-
/* set UCLK to requested value if P-State switching is supported, or to re-enable P-State switching */
if (clk_mgr_base->clks.p_state_change_support &&
(update_uclk || !clk_mgr_base->clks.prev_p_state_change_support))
dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz));
- if (clk_mgr_base->ctx->dce_version != DCN_VERSION_3_21 && clk_mgr_base->clks.fclk_p_state_change_support && update_fclk) {
- /* Handle the code for sending a message to PMFW that FCLK P-state change is supported */
- dcn32_smu_send_fclk_pstate_message(clk_mgr, FCLK_PSTATE_SUPPORTED);
- }
-
if (clk_mgr_base->clks.num_ways != new_clocks->num_ways &&
clk_mgr_base->clks.num_ways > new_clocks->num_ways) {
clk_mgr_base->clks.num_ways = new_clocks->num_ways;
--
cgit v1.2.3
From ab5220bb5a910246c61512a9e29a4e2406cb1ecd Mon Sep 17 00:00:00 2001
From: Dmytro Laktyushkin
Date: Thu, 8 Sep 2022 11:37:58 -0400
Subject: drm/amd/display: fix dcn315 dml detile overestimation
DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: Charlene Liu
Acked-by: Hamza Mahfooz
Signed-off-by: Dmytro Laktyushkin
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c | 2 +-
.../drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c | 15 +++++++++++++++
drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.c | 1 +
drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h | 1 +
4 files changed, 18 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
index b6e99eefe869..94b0842cd89b 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -739,7 +739,7 @@ void dcn315_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_param
}
if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
- dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN31);
+ dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN315);
else
dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN31_FPGA);
}
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
index 8dfe639b6508..b612edb14417 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/display_mode_vba_31.c
@@ -43,6 +43,8 @@
#define BPP_BLENDED_PIPE 0xffffffff
#define DCN31_MAX_DSC_IMAGE_WIDTH 5184
#define DCN31_MAX_FMT_420_BUFFER_WIDTH 4096
+#define DCN3_15_MIN_COMPBUF_SIZE_KB 128
+#define DCN3_15_MAX_DET_SIZE 384
// For DML-C changes that hasn't been propagated to VBA yet
//#define __DML_VBA_ALLOW_DELTA__
@@ -3775,6 +3777,17 @@ static noinline void CalculatePrefetchSchedulePerPlane(
&v->VReadyOffsetPix[k]);
}
+static void PatchDETBufferSizeInKByte(unsigned int NumberOfActivePlanes, int NoOfDPPThisState[], unsigned int config_return_buffer_size_in_kbytes, unsigned int *DETBufferSizeInKByte)
+{
+ int i, total_pipes = 0;
+ for (i = 0; i < NumberOfActivePlanes; i++)
+ total_pipes += NoOfDPPThisState[i];
+ *DETBufferSizeInKByte = ((config_return_buffer_size_in_kbytes - DCN3_15_MIN_COMPBUF_SIZE_KB) / 64 / total_pipes) * 64;
+ if (*DETBufferSizeInKByte > DCN3_15_MAX_DET_SIZE)
+ *DETBufferSizeInKByte = DCN3_15_MAX_DET_SIZE;
+}
+
+
void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
{
struct vba_vars_st *v = &mode_lib->vba;
@@ -4533,6 +4546,8 @@ void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
v->ODMCombineEnableThisState[k] = v->ODMCombineEnablePerState[i][k];
}
+ if (v->NumberOfActivePlanes > 1 && mode_lib->project == DML_PROJECT_DCN315)
+ PatchDETBufferSizeInKByte(v->NumberOfActivePlanes, v->NoOfDPPThisState, v->ip.config_return_buffer_size_in_kbytes, &v->DETBufferSizeInKByte[0]);
CalculateSwathAndDETConfiguration(
false,
v->NumberOfActivePlanes,
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.c b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.c
index f5400eda07a5..4125d3d111d1 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.c
@@ -114,6 +114,7 @@ void dml_init_instance(struct display_mode_lib *lib,
break;
case DML_PROJECT_DCN31:
case DML_PROJECT_DCN31_FPGA:
+ case DML_PROJECT_DCN315:
lib->funcs = dml31_funcs;
break;
case DML_PROJECT_DCN314:
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
index b1878a1440e2..3d643d50c3eb 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
@@ -40,6 +40,7 @@ enum dml_project {
DML_PROJECT_DCN21,
DML_PROJECT_DCN30,
DML_PROJECT_DCN31,
+ DML_PROJECT_DCN315,
DML_PROJECT_DCN31_FPGA,
DML_PROJECT_DCN314,
DML_PROJECT_DCN32,
--
cgit v1.2.3
From d35e8b7ae01430b1e722547b2ef40f42dc30520f Mon Sep 17 00:00:00 2001
From: Alvin Lee
Date: Tue, 20 Sep 2022 10:46:18 -0400
Subject: drm/amd/display: Block SubVP if rotation being used
[Description]
- SubVP rotation support is not explicitly implemented,
so block SubVP in rotation cases to avoid unexpected
behaviors
Reviewed-by: Nevenko Stupar
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Alvin Lee
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h | 2 ++
.../drm/amd/display/dc/dcn32/dcn32_resource_helpers.c | 17 +++++++++++++++++
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 3 ++-
3 files changed, 21 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
index 55945cca2260..a24f538bdc4c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
@@ -108,6 +108,8 @@ bool dcn32_subvp_in_use(struct dc *dc,
bool dcn32_mpo_in_use(struct dc_state *context);
+bool dcn32_any_surfaces_rotated(struct dc *dc, struct dc_state *context);
+
struct pipe_ctx *dcn32_acquire_idle_pipe_for_head_pipe_in_layer(
struct dc_state *state,
const struct resource_pool *pool,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index a2a70a1572b7..7f318ced5dee 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -233,6 +233,23 @@ bool dcn32_mpo_in_use(struct dc_state *context)
return false;
}
+
+bool dcn32_any_surfaces_rotated(struct dc *dc, struct dc_state *context)
+{
+ uint32_t i;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (!pipe->stream)
+ continue;
+
+ if (pipe->plane_state && pipe->plane_state->rotation != ROTATION_ANGLE_0)
+ return true;
+ }
+ return false;
+}
+
/**
* *******************************************************************************************
* dcn32_determine_det_override: Determine DET allocation for each pipe
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 0571700f53f9..a56ee04f7df9 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1115,7 +1115,8 @@ static void dcn32_full_validate_bw_helper(struct dc *dc,
* 5. (Config doesn't support MCLK in VACTIVE/VBLANK || dc->debug.force_subvp_mclk_switch)
*/
if (!dc->debug.force_disable_subvp && dcn32_all_pipes_have_stream_and_plane(dc, context) &&
- !dcn32_mpo_in_use(context) && (*vlevel == context->bw_ctx.dml.soc.num_states ||
+ !dcn32_mpo_in_use(context) && !dcn32_any_surfaces_rotated(dc, context) &&
+ (*vlevel == context->bw_ctx.dml.soc.num_states ||
vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported ||
dc->debug.force_subvp_mclk_switch)) {
--
cgit v1.2.3
From 96ab3cb3b0f862308a03046d01d66c7b4154846b Mon Sep 17 00:00:00 2001
From: Aric Cyr
Date: Mon, 19 Sep 2022 17:42:22 -0400
Subject: Revert "drm/amd/display: correct hostvm flag"
This reverts commit 796d6a37ff5ffaf9f2dc0f3f4bf9f4a1034c00de.
4K144 resolution isn't available on DCN31.
Reviewed-by: Sherry Wang
Acked-by: Hamza Mahfooz
Signed-off-by: Aric Cyr
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index 8c1a6fb36306..8745132d6374 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -890,7 +890,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.disable_z10 = true,
.optimize_edp_link_rate = true,
.enable_z9_disable_interface = true, /* Allow support for the PMFW interface for disable Z9*/
- .dml_hostvm_override = DML_HOSTVM_NO_OVERRIDE,
+ .dml_hostvm_override = DML_HOSTVM_OVERRIDE_FALSE,
};
static const struct dc_debug_options debug_defaults_diags = {
--
cgit v1.2.3
From dfb3367bd082ccf52d3c13ff62257f08407dffcf Mon Sep 17 00:00:00 2001
From: Charlene Liu
Date: Tue, 20 Sep 2022 09:23:06 -0400
Subject: drm/amd/display: prevent S4 test from failing
[why]
limit the vm prefetch check for now, until the feature is fully
verified.
Reviewed-by: Hansen Dsouza
Acked-by: Hamza Mahfooz
Signed-off-by: Charlene Liu
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
index 5752271f22df..c5e200d09038 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubbub.c
@@ -67,15 +67,9 @@ static uint32_t convert_and_clamp(
void dcn21_dchvm_init(struct hubbub *hubbub)
{
struct dcn20_hubbub *hubbub1 = TO_DCN20_HUBBUB(hubbub);
- uint32_t riommu_active, prefetch_done;
+ uint32_t riommu_active;
int i;
- REG_GET(DCHVM_RIOMMU_STAT0, HOSTVM_PREFETCH_DONE, &prefetch_done);
-
- if (prefetch_done) {
- hubbub->riommu_active = true;
- return;
- }
//Init DCHVM block
REG_UPDATE(DCHVM_CTRL0, HOSTVM_INIT_REQ, 1);
--
cgit v1.2.3
From 40169e2f37127b7fe60736045b1f9fc04f76b471 Mon Sep 17 00:00:00 2001
From: Alvin Lee
Date: Tue, 20 Sep 2022 19:26:27 -0400
Subject: drm/amd/display: Disable GSL when enabling phantom pipe
[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Alvin Lee
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
index 2038cbda33f7..830562f4139d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
@@ -79,6 +79,8 @@ void hubp32_phantom_hubp_post_enable(struct hubp *hubp)
uint32_t reg_val;
struct dcn20_hubp *hubp2 = TO_DCN20_HUBP(hubp);
+ /* For phantom pipe enable, disable GSL */
+ REG_UPDATE(DCSURF_FLIP_CONTROL2, SURFACE_GSL_ENABLE, 0);
REG_UPDATE(DCHUBP_CNTL, HUBP_BLANK_EN, 1);
reg_val = REG_READ(DCHUBP_CNTL);
if (reg_val) {
--
cgit v1.2.3
From 283e0a673cdf59fe103707ac0466492b315c81a2 Mon Sep 17 00:00:00 2001
From: Wenjing Liu
Date: Thu, 22 Sep 2022 14:22:04 -0400
Subject: drm/amd/display: fix integer overflow during MSA V_Freq calculation
[why]
Analyzer shows incorrect V freq in MSA for some large timing.
[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: Ariel Bernstein
Acked-by: Hamza Mahfooz
Signed-off-by: Wenjing Liu
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
index 52fb2bf3d578..d71d89268a07 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
@@ -197,7 +197,7 @@ static void dcn31_hpo_dp_stream_enc_set_stream_attribute(
uint32_t h_back_porch;
uint32_t h_width;
uint32_t v_height;
- unsigned long long v_freq;
+ uint64_t v_freq;
uint8_t misc0 = 0;
uint8_t misc1 = 0;
uint8_t hsp;
@@ -360,7 +360,7 @@ static void dcn31_hpo_dp_stream_enc_set_stream_attribute(
v_height = hw_crtc_timing.v_border_top + hw_crtc_timing.v_addressable + hw_crtc_timing.v_border_bottom;
hsp = hw_crtc_timing.flags.HSYNC_POSITIVE_POLARITY ? 0 : 0x80;
vsp = hw_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ? 0 : 0x80;
- v_freq = hw_crtc_timing.pix_clk_100hz * 100;
+ v_freq = (uint64_t)hw_crtc_timing.pix_clk_100hz * 100;
/* MSA Packet Mapping to 32-bit Link Symbols - DP2 spec, section 2.7.4.1
*
--
cgit v1.2.3
From 749b6c2ac9d9a7a4d8f4c2e4dc6fa830fd6c6ac7 Mon Sep 17 00:00:00 2001
From: Leo (Hanghong) Ma
Date: Tue, 20 Sep 2022 15:23:42 -0400
Subject: drm/amd/display: AUX tracing cleanup
[Why && How]
Remove the unnecessary AUX trace and use one trace for AUX failure.
Reviewed-by: Martin Leung
Acked-by: Hamza Mahfooz
Signed-off-by: Leo (Hanghong) Ma
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dce/dce_aux.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
index 32782ef9ef77..140297c8ff55 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c
@@ -942,10 +942,6 @@ bool dce_aux_transfer_with_retries(struct ddc_service *ddc,
case AUX_RET_ERROR_ENGINE_ACQUIRE:
case AUX_RET_ERROR_UNKNOWN:
default:
- DC_TRACE_LEVEL_MESSAGE(DAL_TRACE_LEVEL_INFORMATION,
- LOG_FLAG_I2cAux_DceAux,
- "dce_aux_transfer_with_retries: Failure: operation_result=%d",
- (int)operation_result);
goto fail;
}
}
@@ -953,14 +949,11 @@ bool dce_aux_transfer_with_retries(struct ddc_service *ddc,
fail:
DC_TRACE_LEVEL_MESSAGE(DAL_TRACE_LEVEL_ERROR,
LOG_FLAG_Error_I2cAux,
- "dce_aux_transfer_with_retries: FAILURE");
+ "%s: Failure: operation_result=%d",
+ __func__,
+ (int)operation_result);
if (!payload_reply)
payload->reply = NULL;
- DC_TRACE_LEVEL_MESSAGE(DAL_TRACE_LEVEL_ERROR,
- WPP_BIT_FLAG_DC_ERROR,
- "AUX transaction failed. Result: %d",
- operation_result);
-
return false;
}
--
cgit v1.2.3
From 7aeb2e47e43d5acd4638c64b4c0c01ad90feea51 Mon Sep 17 00:00:00 2001
From: Iswara Nagulendran
Date: Mon, 19 Sep 2022 15:53:56 -0400
Subject: drm/amd/display: Allow PSR exit when panel is disconnected
[HOW&WHY]
Fixed check to only avoid PSR entry when panel
is disconnected. PSR exit can be permitted to restore
the HW to it's non-PSR state.
Reviewed-by: Jayendran Ramani
Acked-by: Hamza Mahfooz
Signed-off-by: Iswara Nagulendran
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 3d19fb92333b..895c6e6bfeb8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3143,7 +3143,7 @@ bool dc_link_set_psr_allow_active(struct dc_link *link, const bool *allow_active
if (!dc_get_edp_link_panel_inst(dc, link, &panel_inst))
return false;
- if (allow_active && link->type == dc_connection_none) {
+ if ((allow_active != NULL) && (*allow_active == true) && (link->type == dc_connection_none)) {
// Don't enter PSR if panel is not connected
return false;
}
--
cgit v1.2.3
From 1178ac68dc2869a2f4192600b701de3d853272d2 Mon Sep 17 00:00:00 2001
From: Ian Chen
Date: Tue, 23 Aug 2022 17:26:51 +0800
Subject: drm/amd/display: Refactor edp ILR caps codes
We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: Anthony Koo
Acked-by: Hamza Mahfooz
Signed-off-by: Ian Chen
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 ++++-
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 ++--
drivers/gpu/drm/amd/display/dc/dc.h | 1 -
drivers/gpu/drm/amd/display/dc/dc_link.h | 4 ++++
drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 13 ++++++++++++-
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 13 ++++++++++++-
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 13 ++++++++++++-
drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c | 13 ++++++++++++-
drivers/gpu/drm/amd/display/dc/dcn316/dcn316_resource.c | 13 ++++++++++++-
drivers/gpu/drm/amd/display/dc/inc/core_types.h | 1 +
10 files changed, 71 insertions(+), 9 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 895c6e6bfeb8..c4daef1e708c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1307,7 +1307,10 @@ static bool detect_link_and_local_sink(struct dc_link *link,
}
if (link->connector_signal == SIGNAL_TYPE_EDP) {
- // Init dc_panel_config
+ /* Init dc_panel_config by HW config */
+ if (dc_ctx->dc->res_pool->funcs->get_panel_config_defaults)
+ dc_ctx->dc->res_pool->funcs->get_panel_config_defaults(&link->panel_config);
+ /* Pickup base DM settings */
dm_helpers_init_panel_settings(dc_ctx, &link->panel_config, sink);
// Override dc_panel_config if system has specific settings
dm_helpers_override_panel_settings(dc_ctx, &link->panel_config);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index c57df45e83ff..70456580eecc 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5795,7 +5795,7 @@ void detect_edp_sink_caps(struct dc_link *link)
* Per VESA eDP spec, "The DPCD revision for eDP v1.4 is 13h"
*/
if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_13 &&
- (link->dc->debug.optimize_edp_link_rate ||
+ (link->panel_config.ilr.optimize_edp_link_rate ||
link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN)) {
// Read DPCD 00010h - 0001Fh 16 bytes at one shot
core_link_read_dpcd(link, DP_SUPPORTED_LINK_RATES,
@@ -6744,7 +6744,7 @@ bool is_edp_ilr_optimization_required(struct dc_link *link, struct dc_crtc_timin
ASSERT(link || crtc_timing); // invalid input
if (link->dpcd_caps.edp_supported_link_rates_count == 0 ||
- !link->dc->debug.optimize_edp_link_rate)
+ !link->panel_config.ilr.optimize_edp_link_rate)
return false;
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 2ecf36e6329b..458a4f431ac6 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -821,7 +821,6 @@ struct dc_debug_options {
/* Enable dmub aux for legacy ddc */
bool enable_dmub_aux_for_legacy_ddc;
bool disable_fams;
- bool optimize_edp_link_rate; /* eDP ILR */
/* FEC/PSR1 sequence enable delay in 100us */
uint8_t fec_enable_delay_in100us;
bool enable_driver_sequence_debug;
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
index bf5f9e2773bc..caf0c7af2d0b 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_link.h
@@ -138,6 +138,10 @@ struct dc_panel_config {
bool disable_dsc_edp;
unsigned int force_dsc_edp_policy;
} dsc;
+ /* eDP ILR */
+ struct ilr {
+ bool optimize_edp_link_rate; /* eDP ILR */
+ } ilr;
};
/*
* A link contains one or more sinks and their connected status.
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 7cb35bb1c0f1..887081472c0d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -657,7 +657,6 @@ static const struct dc_debug_options debug_defaults_drv = {
.usbc_combo_phy_reset_wa = true,
.dmub_command_table = true,
.use_max_lb = true,
- .optimize_edp_link_rate = true
};
static const struct dc_debug_options debug_defaults_diags = {
@@ -677,6 +676,12 @@ static const struct dc_debug_options debug_defaults_diags = {
.use_max_lb = true
};
+static const struct dc_panel_config panel_config_defaults = {
+ .ilr = {
+ .optimize_edp_link_rate = true,
+ },
+};
+
enum dcn20_clk_src_array_id {
DCN20_CLK_SRC_PLL0,
DCN20_CLK_SRC_PLL1,
@@ -1367,6 +1372,11 @@ static struct panel_cntl *dcn21_panel_cntl_create(const struct panel_cntl_init_d
return &panel_cntl->base;
}
+static void dcn21_get_panel_config_defaults(struct dc_panel_config *panel_config)
+{
+ *panel_config = panel_config_defaults;
+}
+
#define CTX ctx
#define REG(reg_name) \
@@ -1408,6 +1418,7 @@ static const struct resource_funcs dcn21_res_pool_funcs = {
.set_mcif_arb_params = dcn20_set_mcif_arb_params,
.find_first_free_match_stream_enc_for_link = dcn10_find_first_free_match_stream_enc_for_link,
.update_bw_bounding_box = dcn21_update_bw_bounding_box,
+ .get_panel_config_defaults = dcn21_get_panel_config_defaults,
};
static bool dcn21_resource_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index 8745132d6374..fddc21a5a04c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -888,7 +888,6 @@ static const struct dc_debug_options debug_defaults_drv = {
}
},
.disable_z10 = true,
- .optimize_edp_link_rate = true,
.enable_z9_disable_interface = true, /* Allow support for the PMFW interface for disable Z9*/
.dml_hostvm_override = DML_HOSTVM_OVERRIDE_FALSE,
};
@@ -911,6 +910,12 @@ static const struct dc_debug_options debug_defaults_diags = {
.use_max_lb = true
};
+static const struct dc_panel_config panel_config_defaults = {
+ .ilr = {
+ .optimize_edp_link_rate = true,
+ },
+};
+
static void dcn31_dpp_destroy(struct dpp **dpp)
{
kfree(TO_DCN20_DPP(*dpp));
@@ -1803,6 +1808,11 @@ validate_out:
return out;
}
+static void dcn31_get_panel_config_defaults(struct dc_panel_config *panel_config)
+{
+ *panel_config = panel_config_defaults;
+}
+
static struct dc_cap_funcs cap_funcs = {
.get_dcc_compression_cap = dcn20_get_dcc_compression_cap
};
@@ -1829,6 +1839,7 @@ static struct resource_funcs dcn31_res_pool_funcs = {
.release_post_bldn_3dlut = dcn30_release_post_bldn_3dlut,
.update_bw_bounding_box = dcn31_update_bw_bounding_box,
.patch_unknown_plane_state = dcn20_patch_unknown_plane_state,
+ .get_panel_config_defaults = dcn31_get_panel_config_defaults,
};
static struct clock_source *dcn30_clock_source_create(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
index 24ec71cbd3e3..70b647b9b4d3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
@@ -914,7 +914,6 @@ static const struct dc_debug_options debug_defaults_drv = {
.afmt = true,
}
},
- .optimize_edp_link_rate = true,
.seamless_boot_odm_combine = true
};
@@ -936,6 +935,12 @@ static const struct dc_debug_options debug_defaults_diags = {
.use_max_lb = true
};
+static const struct dc_panel_config panel_config_defaults = {
+ .ilr = {
+ .optimize_edp_link_rate = true,
+ },
+};
+
static void dcn31_dpp_destroy(struct dpp **dpp)
{
kfree(TO_DCN20_DPP(*dpp));
@@ -1675,6 +1680,11 @@ static void dcn314_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *b
DC_FP_END();
}
+static void dcn314_get_panel_config_defaults(struct dc_panel_config *panel_config)
+{
+ *panel_config = panel_config_defaults;
+}
+
static struct resource_funcs dcn314_res_pool_funcs = {
.destroy = dcn314_destroy_resource_pool,
.link_enc_create = dcn31_link_encoder_create,
@@ -1697,6 +1707,7 @@ static struct resource_funcs dcn314_res_pool_funcs = {
.release_post_bldn_3dlut = dcn30_release_post_bldn_3dlut,
.update_bw_bounding_box = dcn314_update_bw_bounding_box,
.patch_unknown_plane_state = dcn20_patch_unknown_plane_state,
+ .get_panel_config_defaults = dcn314_get_panel_config_defaults,
};
static struct clock_source *dcn30_clock_source_create(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index eebb42c9ddd6..0f71bb86dc9a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -885,7 +885,6 @@ static const struct dc_debug_options debug_defaults_drv = {
.afmt = true,
}
},
- .optimize_edp_link_rate = true,
.psr_power_use_phy_fsm = 0,
};
@@ -907,6 +906,12 @@ static const struct dc_debug_options debug_defaults_diags = {
.use_max_lb = true
};
+static const struct dc_panel_config panel_config_defaults = {
+ .ilr = {
+ .optimize_edp_link_rate = true,
+ },
+};
+
static void dcn31_dpp_destroy(struct dpp **dpp)
{
kfree(TO_DCN20_DPP(*dpp));
@@ -1708,6 +1713,11 @@ static int dcn315_populate_dml_pipes_from_context(
return pipe_cnt;
}
+static void dcn315_get_panel_config_defaults(struct dc_panel_config *panel_config)
+{
+ *panel_config = panel_config_defaults;
+}
+
static struct dc_cap_funcs cap_funcs = {
.get_dcc_compression_cap = dcn20_get_dcc_compression_cap
};
@@ -1734,6 +1744,7 @@ static struct resource_funcs dcn315_res_pool_funcs = {
.release_post_bldn_3dlut = dcn30_release_post_bldn_3dlut,
.update_bw_bounding_box = dcn315_update_bw_bounding_box,
.patch_unknown_plane_state = dcn20_patch_unknown_plane_state,
+ .get_panel_config_defaults = dcn315_get_panel_config_defaults,
};
static bool dcn315_resource_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn316/dcn316_resource.c b/drivers/gpu/drm/amd/display/dc/dcn316/dcn316_resource.c
index f4b52a35ad84..6b40a11ac83a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn316/dcn316_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn316/dcn316_resource.c
@@ -885,7 +885,6 @@ static const struct dc_debug_options debug_defaults_drv = {
.afmt = true,
}
},
- .optimize_edp_link_rate = true,
};
static const struct dc_debug_options debug_defaults_diags = {
@@ -906,6 +905,12 @@ static const struct dc_debug_options debug_defaults_diags = {
.use_max_lb = true
};
+static const struct dc_panel_config panel_config_defaults = {
+ .ilr = {
+ .optimize_edp_link_rate = true,
+ },
+};
+
static void dcn31_dpp_destroy(struct dpp **dpp)
{
kfree(TO_DCN20_DPP(*dpp));
@@ -1710,6 +1715,11 @@ static int dcn316_populate_dml_pipes_from_context(
return pipe_cnt;
}
+static void dcn316_get_panel_config_defaults(struct dc_panel_config *panel_config)
+{
+ *panel_config = panel_config_defaults;
+}
+
static struct dc_cap_funcs cap_funcs = {
.get_dcc_compression_cap = dcn20_get_dcc_compression_cap
};
@@ -1736,6 +1746,7 @@ static struct resource_funcs dcn316_res_pool_funcs = {
.release_post_bldn_3dlut = dcn30_release_post_bldn_3dlut,
.update_bw_bounding_box = dcn316_update_bw_bounding_box,
.patch_unknown_plane_state = dcn20_patch_unknown_plane_state,
+ .get_panel_config_defaults = dcn316_get_panel_config_defaults,
};
static bool dcn316_resource_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
index 8919a2092ac5..4ff1392633a7 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
@@ -232,6 +232,7 @@ struct resource_funcs {
unsigned int index);
bool (*remove_phantom_pipes)(struct dc *dc, struct dc_state *context);
+ void (*get_panel_config_defaults)(struct dc_panel_config *panel_config);
};
struct audio_support{
--
cgit v1.2.3
From 380202c84454e89d29a9abc670f09b9145617d58 Mon Sep 17 00:00:00 2001
From: Alvin Lee
Date: Wed, 21 Sep 2022 12:04:25 -0400
Subject: drm/amd/display: For SubVP pipe split case use min transition into
MPO
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Alvin Lee
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 36 +++++++++++
.../gpu/drm/amd/display/dc/dcn32/dcn32_resource.c | 18 ++++++
.../gpu/drm/amd/display/dc/dcn32/dcn32_resource.h | 20 ++++++
.../amd/display/dc/dcn32/dcn32_resource_helpers.c | 71 ++++++++++++++++++++++
4 files changed, 145 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 4ba2c1f95dcb..a81a61f006c4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3564,6 +3564,7 @@ static bool could_mpcc_tree_change_for_active_pipes(struct dc *dc,
struct dc_stream_status *cur_stream_status = stream_get_status(dc->current_state, stream);
bool force_minimal_pipe_splitting = false;
+ uint32_t i;
*is_plane_addition = false;
@@ -3595,6 +3596,36 @@ static bool could_mpcc_tree_change_for_active_pipes(struct dc *dc,
}
}
+ /* For SubVP pipe split case when adding MPO video
+ * we need to add a minimal transition. In this case
+ * there will be 2 streams (1 main stream, 1 phantom
+ * stream).
+ */
+ if (cur_stream_status &&
+ dc->current_state->stream_count == 2 &&
+ stream->mall_stream_config.type == SUBVP_MAIN) {
+ bool is_pipe_split = false;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ if (dc->current_state->res_ctx.pipe_ctx[i].stream == stream &&
+ (dc->current_state->res_ctx.pipe_ctx[i].bottom_pipe ||
+ dc->current_state->res_ctx.pipe_ctx[i].next_odm_pipe)) {
+ is_pipe_split = true;
+ break;
+ }
+ }
+
+ /* determine if minimal transition is required due to SubVP*/
+ if (surface_count > 0 && is_pipe_split) {
+ if (cur_stream_status->plane_count > surface_count) {
+ force_minimal_pipe_splitting = true;
+ } else if (cur_stream_status->plane_count < surface_count) {
+ force_minimal_pipe_splitting = true;
+ *is_plane_addition = true;
+ }
+ }
+ }
+
return force_minimal_pipe_splitting;
}
@@ -3604,6 +3635,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
struct dc_state *transition_context = dc_create_state(dc);
enum pipe_split_policy tmp_mpc_policy;
bool temp_dynamic_odm_policy;
+ bool temp_subvp_policy;
enum dc_status ret = DC_ERROR_UNEXPECTED;
unsigned int i, j;
@@ -3618,6 +3650,9 @@ static bool commit_minimal_transition_state(struct dc *dc,
temp_dynamic_odm_policy = dc->debug.enable_single_display_2to1_odm_policy;
dc->debug.enable_single_display_2to1_odm_policy = false;
+ temp_subvp_policy = dc->debug.force_disable_subvp;
+ dc->debug.force_disable_subvp = true;
+
dc_resource_state_copy_construct(transition_base_context, transition_context);
//commit minimal state
@@ -3646,6 +3681,7 @@ static bool commit_minimal_transition_state(struct dc *dc,
dc->debug.pipe_split_policy = tmp_mpc_policy;
dc->debug.enable_single_display_2to1_odm_policy = temp_dynamic_odm_policy;
+ dc->debug.force_disable_subvp = temp_subvp_policy;
if (ret != DC_OK) {
/*this should never happen*/
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
index 05de97ea855f..752a4accb116 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
@@ -1798,14 +1798,32 @@ bool dcn32_validate_bandwidth(struct dc *dc,
int vlevel = 0;
int pipe_cnt = 0;
display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_KERNEL);
+ struct mall_temp_config mall_temp_config;
DC_LOGGER_INIT(dc->ctx->logger);
+ /* For fast validation, there are situations where a shallow copy of
+ * of the dc->current_state is created for the validation. In this case
+ * we want to save and restore the mall config because we always
+ * teardown subvp at the beginning of validation (and don't attempt
+ * to add it back if it's fast validation). If we don't restore the
+ * subvp config in cases of fast validation + shallow copy of the
+ * dc->current_state, the dc->current_state will have a partially
+ * removed subvp state when we did not intend to remove it.
+ */
+ if (fast_validate) {
+ memset(&mall_temp_config, 0, sizeof(mall_temp_config));
+ dcn32_save_mall_state(dc, context, &mall_temp_config);
+ }
+
BW_VAL_TRACE_COUNT();
DC_FP_START();
out = dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, fast_validate);
DC_FP_END();
+ if (fast_validate)
+ dcn32_restore_mall_state(dc, context, &mall_temp_config);
+
if (pipe_cnt == 0)
goto validate_out;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
index a24f538bdc4c..f76120e67c16 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
@@ -45,6 +45,17 @@
extern struct _vcs_dpi_ip_params_st dcn3_2_ip;
extern struct _vcs_dpi_soc_bounding_box_st dcn3_2_soc;
+/* Temp struct used to save and restore MALL config
+ * during validation.
+ *
+ * TODO: Move MALL config into dc_state instead of stream struct
+ * to avoid needing to save/restore.
+ */
+struct mall_temp_config {
+ struct mall_stream_config mall_stream_config[MAX_PIPES];
+ bool is_phantom_plane[MAX_PIPES];
+};
+
struct dcn32_resource_pool {
struct resource_pool base;
};
@@ -122,6 +133,15 @@ void dcn32_determine_det_override(struct dc *dc,
void dcn32_set_det_allocations(struct dc *dc, struct dc_state *context,
display_e2e_pipe_params_st *pipes);
+
+void dcn32_save_mall_state(struct dc *dc,
+ struct dc_state *context,
+ struct mall_temp_config *temp_config);
+
+void dcn32_restore_mall_state(struct dc *dc,
+ struct dc_state *context,
+ struct mall_temp_config *temp_config);
+
/* definitions for run time init of reg offsets */
/* CLK SRC */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
index 7f318ced5dee..d51d0c40ae5b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c
@@ -380,3 +380,74 @@ void dcn32_set_det_allocations(struct dc *dc, struct dc_state *context,
} else
dcn32_determine_det_override(dc, context, pipes);
}
+
+/**
+ * *******************************************************************************************
+ * dcn32_save_mall_state: Save MALL (SubVP) state for fast validation cases
+ *
+ * This function saves the MALL (SubVP) case for fast validation cases. For fast validation,
+ * there are situations where a shallow copy of the dc->current_state is created for the
+ * validation. In this case we want to save and restore the mall config because we always
+ * teardown subvp at the beginning of validation (and don't attempt to add it back if it's
+ * fast validation). If we don't restore the subvp config in cases of fast validation +
+ * shallow copy of the dc->current_state, the dc->current_state will have a partially
+ * removed subvp state when we did not intend to remove it.
+ *
+ * NOTE: This function ONLY works if the streams are not moved to a different pipe in the
+ * validation. We don't expect this to happen in fast_validation=1 cases.
+ *
+ * @param [in]: dc: Current DC state
+ * @param [in]: context: New DC state to be programmed
+ * @param [out]: temp_config: struct used to cache the existing MALL state
+ *
+ * @return: void
+ *
+ * *******************************************************************************************
+ */
+void dcn32_save_mall_state(struct dc *dc,
+ struct dc_state *context,
+ struct mall_temp_config *temp_config)
+{
+ uint32_t i;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->stream)
+ temp_config->mall_stream_config[i] = pipe->stream->mall_stream_config;
+
+ if (pipe->plane_state)
+ temp_config->is_phantom_plane[i] = pipe->plane_state->is_phantom;
+ }
+}
+
+/**
+ * *******************************************************************************************
+ * dcn32_restore_mall_state: Restore MALL (SubVP) state for fast validation cases
+ *
+ * Restore the MALL state based on the previously saved state from dcn32_save_mall_state
+ *
+ * @param [in]: dc: Current DC state
+ * @param [in/out]: context: New DC state to be programmed, restore MALL state into here
+ * @param [in]: temp_config: struct that has the cached MALL state
+ *
+ * @return: void
+ *
+ * *******************************************************************************************
+ */
+void dcn32_restore_mall_state(struct dc *dc,
+ struct dc_state *context,
+ struct mall_temp_config *temp_config)
+{
+ uint32_t i;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->stream)
+ pipe->stream->mall_stream_config = temp_config->mall_stream_config[i];
+
+ if (pipe->plane_state)
+ pipe->plane_state->is_phantom = temp_config->is_phantom_plane[i];
+ }
+}
--
cgit v1.2.3
From 345d6493476615494bd79a8fe77661918ea7c61a Mon Sep 17 00:00:00 2001
From: Leo Chen
Date: Fri, 16 Sep 2022 14:13:11 -0400
Subject: drm/amd/display: Add log for LTTPR
[Why & How]
Adding log for LTTPR to facilitate debugging.
Reviewed-by: Charlene Liu
Acked-by: Hamza Mahfooz
Signed-off-by: Leo Chen
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 29 +++++++++++++++++++-----
1 file changed, 23 insertions(+), 6 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 70456580eecc..eb32e99fbde1 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -5090,6 +5090,7 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
(dp_convert_to_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) == 0)) {
ASSERT(0);
link->dpcd_caps.lttpr_caps.phy_repeater_cnt = 0x80;
+ DC_LOG_DC("lttpr_caps forced phy_repeater_cnt = %d\n", link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
}
/* Attempt to train in LTTPR transparent mode if repeater count exceeds 8. */
@@ -5098,6 +5099,7 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
if (is_lttpr_present)
CONN_DATA_DETECT(link, lttpr_dpcd_data, sizeof(lttpr_dpcd_data), "LTTPR Caps: ");
+ DC_LOG_DC("is_lttpr_present = %d\n", is_lttpr_present);
return is_lttpr_present;
}
@@ -5134,6 +5136,7 @@ void dp_get_lttpr_mode_override(struct dc_link *link, enum lttpr_mode *override)
} else if (link->dc->debug.lttpr_mode_override == LTTPR_MODE_NON_LTTPR) {
*override = LTTPR_MODE_NON_LTTPR;
}
+ DC_LOG_DC("lttpr_mode_override chose LTTPR_MODE = %d\n", (uint8_t)(*override));
}
enum lttpr_mode dp_decide_8b_10b_lttpr_mode(struct dc_link *link)
@@ -5146,22 +5149,34 @@ enum lttpr_mode dp_decide_8b_10b_lttpr_mode(struct dc_link *link)
return LTTPR_MODE_NON_LTTPR;
if (vbios_lttpr_aware) {
- if (vbios_lttpr_force_non_transparent)
+ if (vbios_lttpr_force_non_transparent) {
+ DC_LOG_DC("chose LTTPR_MODE_NON_TRANSPARENT due to VBIOS DCE_INFO_CAPS_LTTPR_SUPPORT_ENABLE set to 1.\n");
return LTTPR_MODE_NON_TRANSPARENT;
- else
+ } else {
+ DC_LOG_DC("chose LTTPR_MODE_NON_TRANSPARENT by default due to VBIOS not set DCE_INFO_CAPS_LTTPR_SUPPORT_ENABLE set to 1.\n");
return LTTPR_MODE_TRANSPARENT;
+ }
}
if (link->dc->config.allow_lttpr_non_transparent_mode.bits.DP1_4A &&
- link->dc->caps.extended_aux_timeout_support)
+ link->dc->caps.extended_aux_timeout_support) {
+ DC_LOG_DC("chose LTTPR_MODE_NON_TRANSPARENT by default and dc->config.allow_lttpr_non_transparent_mode.bits.DP1_4A set to 1.\n");
return LTTPR_MODE_NON_TRANSPARENT;
+ }
+ DC_LOG_DC("chose LTTPR_MODE_NON_LTTPR.\n");
return LTTPR_MODE_NON_LTTPR;
}
enum lttpr_mode dp_decide_128b_132b_lttpr_mode(struct dc_link *link)
{
- return dp_is_lttpr_present(link) ? LTTPR_MODE_NON_TRANSPARENT : LTTPR_MODE_NON_LTTPR;
+ enum lttpr_mode mode = LTTPR_MODE_NON_LTTPR;
+
+ if (dp_is_lttpr_present(link))
+ mode = LTTPR_MODE_NON_TRANSPARENT;
+
+ DC_LOG_DC("128b_132b chose LTTPR_MODE %d.\n", mode);
+ return mode;
}
static bool get_usbc_cable_id(struct dc_link *link, union dp_cable_id *cable_id)
@@ -5179,9 +5194,10 @@ static bool get_usbc_cable_id(struct dc_link *link, union dp_cable_id *cable_id)
cmd.cable_id.data.input.phy_inst = resource_transmitter_to_phy_idx(
link->dc, link->link_enc->transmitter);
if (dc_dmub_srv_cmd_with_reply_data(link->ctx->dmub_srv, &cmd) &&
- cmd.cable_id.header.ret_status == 1)
+ cmd.cable_id.header.ret_status == 1) {
cable_id->raw = cmd.cable_id.data.output_raw;
-
+ DC_LOG_DC("usbc_cable_id = %d.\n", cable_id->raw);
+ }
return cmd.cable_id.header.ret_status == 1;
}
@@ -5228,6 +5244,7 @@ static enum dc_status wa_try_to_wake_dprx(struct dc_link *link, uint64_t timeout
lttpr_present = dp_is_lttpr_present(link) ||
(!vbios_lttpr_interop || !link->dc->caps.extended_aux_timeout_support);
+ DC_LOG_DC("lttpr_present = %d.\n", lttpr_present ? 1 : 0);
/* Issue an AUX read to test DPRX responsiveness. If LTTPR is supported the first read is expected to
* be to determine LTTPR capabilities. Otherwise trying to read power state should be an innocuous AUX read.
--
cgit v1.2.3
From e4e481e4d838f30985dd46d43ed195110ed265f5 Mon Sep 17 00:00:00 2001
From: Zhikai Zhai
Date: Tue, 20 Sep 2022 18:51:02 +0800
Subject: drm/amd/display: skip commit minimal transition state
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: Dillon Varone
Acked-by: Hamza Mahfooz
Signed-off-by: Zhikai Zhai
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index a81a61f006c4..6216ceb790b4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3638,10 +3638,30 @@ static bool commit_minimal_transition_state(struct dc *dc,
bool temp_subvp_policy;
enum dc_status ret = DC_ERROR_UNEXPECTED;
unsigned int i, j;
+ unsigned int pipe_in_use = 0;
if (!transition_context)
return false;
+ /* check current pipes in use*/
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &transition_base_context->res_ctx.pipe_ctx[i];
+
+ if (pipe->plane_state)
+ pipe_in_use++;
+ }
+
+ /* When the OS add a new surface if we have been used all of pipes with odm combine
+ * and mpc split feature, it need use commit_minimal_transition_state to transition safely.
+ * After OS exit MPO, it will back to use odm and mpc split with all of pipes, we need
+ * call it again. Otherwise return true to skip.
+ *
+ * Reduce the scenarios to use dc_commit_state_no_check in the stage of flip. Especially
+ * enter/exit MPO when DCN still have enough resources.
+ */
+ if (pipe_in_use != dc->res_pool->pipe_count)
+ return true;
+
if (!dc->config.is_vmin_only_asic) {
tmp_mpc_policy = dc->debug.pipe_split_policy;
dc->debug.pipe_split_policy = MPC_SPLIT_AVOID;
--
cgit v1.2.3
From 4931ce22eca6ed5f8a3a3820fd13e586011ac219 Mon Sep 17 00:00:00 2001
From: Dmytro Laktyushkin
Date: Fri, 16 Sep 2022 15:55:55 -0400
Subject: drm/amd/display: add dummy pstate workaround to dcn315
DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: Charlene Liu
Acked-by: Hamza Mahfooz
Signed-off-by: Dmytro Laktyushkin
Signed-off-by: Alex Deucher
---
.../gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 4 +
.../drm/amd/display/dc/dcn315/dcn315_resource.c | 2 +-
.../gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c | 89 +++++-----------------
.../gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h | 1 +
4 files changed, 27 insertions(+), 69 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
index 3a3b2ac791c7..020f512e9690 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -1655,6 +1655,9 @@ noinline bool dcn30_internal_validate_bw(
if (!pipes)
return false;
+ context->bw_ctx.dml.vba.maxMpcComb = 0;
+ context->bw_ctx.dml.vba.VoltageLevel = 0;
+ context->bw_ctx.dml.vba.DRAMClockChangeSupport[0][0] = dm_dram_clock_change_vactive;
dc->res_pool->funcs->update_soc_for_wm_a(dc, context);
pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate);
@@ -1873,6 +1876,7 @@ noinline bool dcn30_internal_validate_bw(
if (repopulate_pipes)
pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate);
+ context->bw_ctx.dml.vba.VoltageLevel = vlevel;
*vlevel_out = vlevel;
*pipe_cnt_out = pipe_cnt;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index 0f71bb86dc9a..58746c437554 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -1731,7 +1731,7 @@ static struct resource_funcs dcn315_res_pool_funcs = {
.panel_cntl_create = dcn31_panel_cntl_create,
.validate_bandwidth = dcn31_validate_bandwidth,
.calculate_wm_and_dlg = dcn31_calculate_wm_and_dlg,
- .update_soc_for_wm_a = dcn31_update_soc_for_wm_a,
+ .update_soc_for_wm_a = dcn315_update_soc_for_wm_a,
.populate_dml_pipes = dcn315_populate_dml_pipes_from_context,
.acquire_idle_pipe_for_layer = dcn20_acquire_idle_pipe_for_layer,
.add_stream_to_ctx = dcn30_add_stream_to_ctx,
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
index 94b0842cd89b..87bfc42bdaaf 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c
@@ -292,6 +292,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = {
.urgent_latency_adjustment_fabric_clock_component_us = 0,
.urgent_latency_adjustment_fabric_clock_reference_mhz = 0,
.num_chans = 4,
+ .dummy_pstate_latency_us = 10.0
};
struct _vcs_dpi_ip_params_st dcn3_16_ip = {
@@ -459,6 +460,23 @@ void dcn31_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
}
}
+void dcn315_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
+{
+ dc_assert_fp_enabled();
+
+ if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) {
+ /* For 315 pstate change is only supported if possible in vactive */
+ if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[context->bw_ctx.dml.vba.VoltageLevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_vactive)
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = context->bw_ctx.dml.soc.dummy_pstate_latency_us;
+ else
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us;
+ context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us =
+ dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us;
+ context->bw_ctx.dml.soc.sr_exit_time_us =
+ dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us;
+ }
+}
+
void dcn31_calculate_wm_and_dlg_fp(
struct dc *dc, struct dc_state *context,
display_e2e_pipe_params_st *pipes,
@@ -486,72 +504,6 @@ void dcn31_calculate_wm_and_dlg_fp(
pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
-#if 0 // TODO
- /* Set B:
- * TODO
- */
- if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].valid) {
- if (vlevel == 0) {
- pipes[0].clks_cfg.voltage = 1;
- pipes[0].clks_cfg.dcfclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dcfclk_mhz;
- }
- context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.pstate_latency_us;
- context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_enter_plus_exit_time_us;
- context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_exit_time_us;
- }
- context->bw_ctx.bw.dcn.watermarks.b.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_enter_plus_exit_z8_ns = get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_exit_z8_ns = get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.b.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
-
- pipes[0].clks_cfg.voltage = vlevel;
- pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
-
- /* Set C:
- * TODO
- */
- if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) {
- context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.pstate_latency_us;
- context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us;
- context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us;
- }
- context->bw_ctx.bw.dcn.watermarks.c.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_enter_plus_exit_z8_ns = get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_exit_z8_ns = get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.c.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
-
- /* Set D:
- * TODO
- */
- if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].valid) {
- context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.pstate_latency_us;
- context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_enter_plus_exit_time_us;
- context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_exit_time_us;
- }
- context->bw_ctx.bw.dcn.watermarks.d.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_enter_plus_exit_z8_ns = get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_exit_z8_ns = get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- context->bw_ctx.bw.dcn.watermarks.d.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
-#endif
-
/* Set A:
* All clocks min required
*
@@ -568,11 +520,9 @@ void dcn31_calculate_wm_and_dlg_fp(
context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
context->bw_ctx.bw.dcn.watermarks.a.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
- /* TODO: remove: */
context->bw_ctx.bw.dcn.watermarks.b = context->bw_ctx.bw.dcn.watermarks.a;
context->bw_ctx.bw.dcn.watermarks.c = context->bw_ctx.bw.dcn.watermarks.a;
context->bw_ctx.bw.dcn.watermarks.d = context->bw_ctx.bw.dcn.watermarks.a;
- /* end remove*/
for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
if (!context->res_ctx.pipe_ctx[i].stream)
@@ -594,6 +544,9 @@ void dcn31_calculate_wm_and_dlg_fp(
}
dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
+ /* For 31x apu pstate change is only supported if possible in vactive */
+ context->bw_ctx.bw.dcn.clk.p_state_change_support =
+ context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive;
}
void dcn31_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
index 4372f17b55d4..fd58b2561ec9 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.h
@@ -35,6 +35,7 @@ void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes,
int pipe_cnt);
void dcn31_update_soc_for_wm_a(struct dc *dc, struct dc_state *context);
+void dcn315_update_soc_for_wm_a(struct dc *dc, struct dc_state *context);
void dcn31_calculate_wm_and_dlg_fp(
struct dc *dc, struct dc_state *context,
--
cgit v1.2.3
From 8cab4ef0ad9521030e1ae4bd294a1e2e6a04659f Mon Sep 17 00:00:00 2001
From: Lewis Huang
Date: Fri, 23 Sep 2022 10:42:40 +0800
Subject: drm/amd/display: Keep OTG on when Z10 is disable
[Why]
Disable OTG when PSRSU with z10 even if z10 is disable
[How]
Reverse condition to keep OTG on when Z10 is disable
Reviewed-by: Robin Chen
Acked-by: Hamza Mahfooz
Signed-off-by: Lewis Huang
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index c4daef1e708c..d7b1ace6328a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3378,8 +3378,8 @@ bool dc_link_setup_psr(struct dc_link *link,
case FAMILY_YELLOW_CARP:
case AMDGPU_FAMILY_GC_10_3_6:
case AMDGPU_FAMILY_GC_11_0_1:
- if(!dc->debug.disable_z10)
- psr_context->psr_level.bits.SKIP_CRTC_DISABLE = false;
+ if (dc->debug.disable_z10)
+ psr_context->psr_level.bits.SKIP_CRTC_DISABLE = true;
break;
default:
psr_context->psr_level.bits.SKIP_CRTC_DISABLE = true;
--
cgit v1.2.3
From b808a7eb30b02e05023b505fe6db590ba799683f Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Tue, 20 Sep 2022 20:50:49 -0400
Subject: drm/amd/display: Increase compbuf size prior to updating clocks
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee
Reviewed-by: Martin Leung
Acked-by: Hamza Mahfooz
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index e1d271fe9e64..7de511fd004b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2018,6 +2018,10 @@ void dcn20_optimize_bandwidth(
context->bw_ctx.bw.dcn.clk.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000)
dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->dc_mode_softmax_memclk);
+ /* increase compbuf size */
+ if (hubbub->funcs->program_compbuf_size)
+ hubbub->funcs->program_compbuf_size(hubbub, context->bw_ctx.bw.dcn.compbuf_size_kb, true);
+
dc->clk_mgr->funcs->update_clocks(
dc->clk_mgr,
context,
@@ -2033,9 +2037,6 @@ void dcn20_optimize_bandwidth(
pipe_ctx->dlg_regs.optimized_min_dst_y_next_start);
}
}
- /* increase compbuf size */
- if (hubbub->funcs->program_compbuf_size)
- hubbub->funcs->program_compbuf_size(hubbub, context->bw_ctx.bw.dcn.compbuf_size_kb, true);
}
bool dcn20_update_bandwidth(
--
cgit v1.2.3
From baec651f4160f4c3f029edf84bbc18b4fcba9cf5 Mon Sep 17 00:00:00 2001
From: Wenjing Liu
Date: Thu, 22 Sep 2022 14:36:32 -0400
Subject: drm/amd/display: write all 4 bytes of FFE_PRESET dpcd value
[why]
According to specs, it expects us to write all 4 bytes even if
current lane count is less than 4.
Reviewed-by: George Shen
Acked-by: Hamza Mahfooz
Signed-off-by: Wenjing Liu
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 37 ++++++++++++------------
1 file changed, 18 insertions(+), 19 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index eb32e99fbde1..1254d38f1778 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -944,6 +944,23 @@ enum dc_status dp_get_lane_status_and_lane_adjust(
return status;
}
+static enum dc_status dpcd_128b_132b_set_lane_settings(
+ struct dc_link *link,
+ const struct link_training_settings *link_training_setting)
+{
+ enum dc_status status = core_link_write_dpcd(link,
+ DP_TRAINING_LANE0_SET,
+ (uint8_t *)(link_training_setting->dpcd_lane_settings),
+ sizeof(link_training_setting->dpcd_lane_settings));
+
+ DC_LOG_HW_LINK_TRAINING("%s:\n 0x%X TX_FFE_PRESET_VALUE = %x\n",
+ __func__,
+ DP_TRAINING_LANE0_SET,
+ link_training_setting->dpcd_lane_settings[0].tx_ffe.PRESET_VALUE);
+ return status;
+}
+
+
enum dc_status dpcd_set_lane_settings(
struct dc_link *link,
const struct link_training_settings *link_training_setting,
@@ -964,16 +981,6 @@ enum dc_status dpcd_set_lane_settings(
link_training_setting->link_settings.lane_count);
if (is_repeater(link_training_setting, offset)) {
- if (dp_get_link_encoding_format(&link_training_setting->link_settings) ==
- DP_128b_132b_ENCODING)
- DC_LOG_HW_LINK_TRAINING("%s:\n LTTPR Repeater ID: %d\n"
- " 0x%X TX_FFE_PRESET_VALUE = %x\n",
- __func__,
- offset,
- lane0_set_address,
- link_training_setting->dpcd_lane_settings[0].tx_ffe.PRESET_VALUE);
- else if (dp_get_link_encoding_format(&link_training_setting->link_settings) ==
- DP_8b_10b_ENCODING)
DC_LOG_HW_LINK_TRAINING("%s\n LTTPR Repeater ID: %d\n"
" 0x%X VS set = %x PE set = %x max VS Reached = %x max PE Reached = %x\n",
__func__,
@@ -985,14 +992,6 @@ enum dc_status dpcd_set_lane_settings(
link_training_setting->dpcd_lane_settings[0].bits.MAX_PRE_EMPHASIS_REACHED);
} else {
- if (dp_get_link_encoding_format(&link_training_setting->link_settings) ==
- DP_128b_132b_ENCODING)
- DC_LOG_HW_LINK_TRAINING("%s:\n 0x%X TX_FFE_PRESET_VALUE = %x\n",
- __func__,
- lane0_set_address,
- link_training_setting->dpcd_lane_settings[0].tx_ffe.PRESET_VALUE);
- else if (dp_get_link_encoding_format(&link_training_setting->link_settings) ==
- DP_8b_10b_ENCODING)
DC_LOG_HW_LINK_TRAINING("%s\n 0x%X VS set = %x PE set = %x max VS Reached = %x max PE Reached = %x\n",
__func__,
lane0_set_address,
@@ -2023,7 +2022,7 @@ static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence(
result = DP_128b_132b_LT_FAILED;
} else {
dp_set_hw_lane_settings(link, link_res, lt_settings, DPRX);
- dpcd_set_lane_settings(link, lt_settings, DPRX);
+ dpcd_128b_132b_set_lane_settings(link, lt_settings);
}
loop_count++;
}
--
cgit v1.2.3
From 51619c671316e96d7adaf2b6ea94ce245b81b6dd Mon Sep 17 00:00:00 2001
From: Aric Cyr
Date: Fri, 23 Sep 2022 17:09:54 -0400
Subject: drm/amd/display: Fix vupdate and vline position calculation
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Aric Cyr
Signed-off-by: Alex Deucher
---
.../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 60 +++++++++-------------
1 file changed, 25 insertions(+), 35 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 4390f6d7050f..f4b3ec32a331 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3818,28 +3818,14 @@ void dcn10_calc_vupdate_position(
uint32_t *start_line,
uint32_t *end_line)
{
- const struct dc_crtc_timing *dc_crtc_timing = &pipe_ctx->stream->timing;
- int vline_int_offset_from_vupdate =
- pipe_ctx->stream->periodic_interrupt.lines_offset;
- int vupdate_offset_from_vsync = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
- int start_position;
-
- if (vline_int_offset_from_vupdate > 0)
- vline_int_offset_from_vupdate--;
- else if (vline_int_offset_from_vupdate < 0)
- vline_int_offset_from_vupdate++;
+ const struct dc_crtc_timing *timing = &pipe_ctx->stream->timing;
+ int vupdate_pos = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
- start_position = vline_int_offset_from_vupdate + vupdate_offset_from_vsync;
-
- if (start_position >= 0)
- *start_line = start_position;
+ if (vupdate_pos >= 0)
+ *start_line = vupdate_pos - ((vupdate_pos / timing->v_total) * timing->v_total);
else
- *start_line = dc_crtc_timing->v_total + start_position - 1;
-
- *end_line = *start_line + 2;
-
- if (*end_line >= dc_crtc_timing->v_total)
- *end_line = 2;
+ *start_line = vupdate_pos + ((-vupdate_pos / timing->v_total) + 1) * timing->v_total - 1;
+ *end_line = (*start_line + 2) % timing->v_total;
}
static void dcn10_cal_vline_position(
@@ -3848,23 +3834,27 @@ static void dcn10_cal_vline_position(
uint32_t *start_line,
uint32_t *end_line)
{
- switch (pipe_ctx->stream->periodic_interrupt.ref_point) {
- case START_V_UPDATE:
- dcn10_calc_vupdate_position(
- dc,
- pipe_ctx,
- start_line,
- end_line);
- break;
- case START_V_SYNC:
+ const struct dc_crtc_timing *timing = &pipe_ctx->stream->timing;
+ int vline_pos = pipe_ctx->stream->periodic_interrupt.lines_offset;
+
+ if (pipe_ctx->stream->periodic_interrupt.ref_point == START_V_UPDATE) {
+ if (vline_pos > 0)
+ vline_pos--;
+ else if (vline_pos < 0)
+ vline_pos++;
+
+ vline_pos += dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
+ if (vline_pos >= 0)
+ *start_line = vline_pos - ((vline_pos / timing->v_total) * timing->v_total);
+ else
+ *start_line = vline_pos + ((-vline_pos / timing->v_total) + 1) * timing->v_total - 1;
+ *end_line = (*start_line + 2) % timing->v_total;
+ } else if (pipe_ctx->stream->periodic_interrupt.ref_point == START_V_SYNC) {
// vsync is line 0 so start_line is just the requested line offset
- *start_line = pipe_ctx->stream->periodic_interrupt.lines_offset;
- *end_line = *start_line + 2;
- break;
- default:
+ *start_line = vline_pos;
+ *end_line = (*start_line + 2) % timing->v_total;
+ } else
ASSERT(0);
- break;
- }
}
void dcn10_setup_periodic_interrupt(
--
cgit v1.2.3
From 2d550a159c55ac836a554fd605545b0feb5f7266 Mon Sep 17 00:00:00 2001
From: Martin Leung
Date: Fri, 23 Sep 2022 17:55:14 -0400
Subject: drm/amd/display: block odd h_total timings from halving pixel rate
why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings
how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Martin Leung
Signed-off-by: Alex Deucher
---
.../display/dc/dcn32/dcn32_dio_stream_encoder.c | 35 +++++++++++++++++++++-
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 9 +++---
2 files changed, 39 insertions(+), 5 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
index 0e9dce414641..3195be9d38f5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
@@ -243,6 +243,39 @@ static bool is_two_pixels_per_containter(const struct dc_crtc_timing *timing)
return two_pix;
}
+static bool is_h_timing_divisible_by_2(const struct dc_crtc_timing *timing)
+{
+ /* math borrowed from function of same name in inc/resource
+ * checks if h_timing is divisible by 2
+ */
+
+ bool divisible = false;
+ uint16_t h_blank_start = 0;
+ uint16_t h_blank_end = 0;
+
+ if (timing) {
+ h_blank_start = timing->h_total - timing->h_front_porch;
+ h_blank_end = h_blank_start - timing->h_addressable;
+
+ /* HTOTAL, Hblank start/end, and Hsync start/end all must be
+ * divisible by 2 in order for the horizontal timing params
+ * to be considered divisible by 2. Hsync start is always 0.
+ */
+ divisible = (timing->h_total % 2 == 0) &&
+ (h_blank_start % 2 == 0) &&
+ (h_blank_end % 2 == 0) &&
+ (timing->h_sync_width % 2 == 0);
+ }
+ return divisible;
+}
+
+static bool is_dp_dig_pixel_rate_div_policy(struct dc *dc, const struct dc_crtc_timing *timing)
+{
+ /* should be functionally the same as dcn32_is_dp_dig_pixel_rate_div_policy for DP encoders*/
+ return is_h_timing_divisible_by_2(timing) &&
+ dc->debug.enable_dp_dig_pixel_rate_div_policy;
+}
+
static void enc32_stream_encoder_dp_unblank(
struct dc_link *link,
struct stream_encoder *enc,
@@ -259,7 +292,7 @@ static void enc32_stream_encoder_dp_unblank(
/* YCbCr 4:2:0 : Computed VID_M will be 2X the input rate */
if (is_two_pixels_per_containter(¶m->timing) || param->opp_cnt > 1
- || dc->debug.enable_dp_dig_pixel_rate_div_policy) {
+ || is_dp_dig_pixel_rate_div_policy(dc, ¶m->timing)) {
/*this logic should be the same in get_pixel_clock_parameters() */
n_multiply = 1;
}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index a750343ca521..8012a48859b5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1161,7 +1161,6 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
{
struct dc_stream_state *stream = pipe_ctx->stream;
unsigned int odm_combine_factor = 0;
- struct dc *dc = pipe_ctx->stream->ctx->dc;
bool two_pix_per_container = false;
// For phantom pipes, use the same programming as the main pipes
@@ -1189,7 +1188,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
} else {
*k1_div = PIXEL_RATE_DIV_BY_1;
*k2_div = PIXEL_RATE_DIV_BY_4;
- if ((odm_combine_factor == 2) || dc->debug.enable_dp_dig_pixel_rate_div_policy)
+ if ((odm_combine_factor == 2) || dcn32_is_dp_dig_pixel_rate_div_policy(pipe_ctx))
*k2_div = PIXEL_RATE_DIV_BY_2;
}
}
@@ -1226,7 +1225,6 @@ void dcn32_unblank_stream(struct pipe_ctx *pipe_ctx,
struct dc_link *link = stream->link;
struct dce_hwseq *hws = link->dc->hwseq;
struct pipe_ctx *odm_pipe;
- struct dc *dc = pipe_ctx->stream->ctx->dc;
uint32_t pix_per_cycle = 1;
params.opp_cnt = 1;
@@ -1245,7 +1243,7 @@ void dcn32_unblank_stream(struct pipe_ctx *pipe_ctx,
pipe_ctx->stream_res.tg->inst);
} else if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
if (optc2_is_two_pixels_per_containter(&stream->timing) || params.opp_cnt > 1
- || dc->debug.enable_dp_dig_pixel_rate_div_policy) {
+ || dcn32_is_dp_dig_pixel_rate_div_policy(pipe_ctx)) {
params.timing.pix_clk_100hz /= 2;
pix_per_cycle = 2;
}
@@ -1262,6 +1260,9 @@ bool dcn32_is_dp_dig_pixel_rate_div_policy(struct pipe_ctx *pipe_ctx)
{
struct dc *dc = pipe_ctx->stream->ctx->dc;
+ if (!is_h_timing_divisible_by_2(pipe_ctx->stream))
+ return false;
+
if (dc_is_dp_signal(pipe_ctx->stream->signal) && !is_dp_128b_132b_signal(pipe_ctx) &&
dc->debug.enable_dp_dig_pixel_rate_div_policy)
return true;
--
cgit v1.2.3
From a2909ff460a8e02168b3658372ebc897f7ab2315 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 13:06:50 -0400
Subject: drm/amd/display: Drop unused code for DCN32/321
Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
.../amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 7 -------
.../amd/display/dc/dcn32/dcn32_dio_link_encoder.h | 4 ----
.../amd/display/dc/dcn32/dcn32_dio_stream_encoder.c | 20 --------------------
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c | 3 +--
.../amd/display/dc/dcn321/dcn321_dio_link_encoder.c | 1 -
.../gpu/drm/amd/display/dc/dcn321/dcn321_resource.c | 2 --
6 files changed, 1 insertion(+), 36 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
index fdae6aa89908..076969d928af 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
@@ -150,12 +150,6 @@ static void dcn32_link_encoder_get_max_link_cap(struct link_encoder *enc,
}
-void enc32_set_dig_output_mode(struct link_encoder *enc, uint8_t pix_per_container)
-{
- struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
- REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_OUTPUT_PIXEL_MODE, pix_per_container);
-}
-
static const struct link_encoder_funcs dcn32_link_enc_funcs = {
.read_state = link_enc2_read_state,
.validate_output_with_stream =
@@ -186,7 +180,6 @@ static const struct link_encoder_funcs dcn32_link_enc_funcs = {
.is_in_alt_mode = dcn32_link_encoder_is_in_alt_mode,
.get_max_link_cap = dcn32_link_encoder_get_max_link_cap,
.set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux,
- .set_dig_output_mode = enc32_set_dig_output_mode,
};
void dcn32_link_encoder_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.h
index 749a1e8cb811..bbcfce06bec0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.h
@@ -53,8 +53,4 @@ void dcn32_link_encoder_enable_dp_output(
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source);
-void enc32_set_dig_output_mode(
- struct link_encoder *enc,
- uint8_t pix_per_container);
-
#endif /* __DC_LINK_ENCODER__DCN32_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
index 3195be9d38f5..40e713c4e172 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
@@ -411,24 +411,6 @@ static void enc32_read_state(struct stream_encoder *enc, struct enc_state *s)
}
}
-static void enc32_stream_encoder_reset_fifo(struct stream_encoder *enc)
-{
- struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
- uint32_t fifo_enabled;
-
- REG_GET(DIG_FIFO_CTRL0, DIG_FIFO_ENABLE, &fifo_enabled);
-
- if (fifo_enabled == 0) {
- /* reset DIG resync FIFO */
- REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 1);
- /* TODO: fix timeout when wait for DIG_FIFO_RESET_DONE */
- //REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 1, 1, 100);
- udelay(1);
- REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 0);
- REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 0, 1, 100);
- }
-}
-
static void enc32_set_dig_input_mode(struct stream_encoder *enc, unsigned int pix_per_container)
{
struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
@@ -458,8 +440,6 @@ static const struct stream_encoder_funcs dcn32_str_enc_funcs = {
enc3_stream_encoder_update_dp_info_packets,
.stop_dp_info_packets =
enc1_stream_encoder_stop_dp_info_packets,
- .reset_fifo =
- enc32_stream_encoder_reset_fifo,
.dp_blank =
enc1_stream_encoder_dp_blank,
.dp_unblank =
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
index 830562f4139d..f4b901d393eb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubp.c
@@ -185,8 +185,7 @@ static struct hubp_funcs dcn32_hubp_funcs = {
.hubp_update_force_pstate_disallow = hubp32_update_force_pstate_disallow,
.phantom_hubp_post_enable = hubp32_phantom_hubp_post_enable,
.hubp_update_mall_sel = hubp32_update_mall_sel,
- .hubp_prepare_subvp_buffering = hubp32_prepare_subvp_buffering,
- .hubp_set_flip_int = hubp1_set_flip_int
+ .hubp_prepare_subvp_buffering = hubp32_prepare_subvp_buffering
};
bool hubp32_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_dio_link_encoder.c
index 49682a31ecbd..fa9b6603cfd3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_dio_link_encoder.c
@@ -91,7 +91,6 @@ static const struct link_encoder_funcs dcn321_link_enc_funcs = {
.is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
.get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
.set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux,
- .set_dig_output_mode = enc32_set_dig_output_mode,
};
void dcn321_link_encoder_construct(
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
index aed0f689cbbf..910b63d874d5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
@@ -94,8 +94,6 @@
#include "dcn20/dcn20_vmid.h"
#define DC_LOGGER_INIT(logger)
-#define fixed16_to_double(x) (((double)x) / ((double) (1 << 16)))
-#define fixed16_to_double_to_cpu(x) fixed16_to_double(le32_to_cpu(x))
enum dcn321_clk_src_array_id {
DCN321_CLK_SRC_PLL0,
--
cgit v1.2.3
From 47b7dd9f68c12e7d33a0dfd3d9a5bed755097de0 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 13:29:19 -0400
Subject: drm/amd/display: Update DCN321 hook that deals with pipe aquire
DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
index 910b63d874d5..6658849d5b4e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
@@ -1604,7 +1604,7 @@ static struct resource_funcs dcn321_res_pool_funcs = {
.validate_bandwidth = dcn32_validate_bandwidth,
.calculate_wm_and_dlg = dcn32_calculate_wm_and_dlg,
.populate_dml_pipes = dcn32_populate_dml_pipes_from_context,
- .acquire_idle_pipe_for_layer = dcn20_acquire_idle_pipe_for_layer,
+ .acquire_idle_pipe_for_head_pipe_in_layer = dcn32_acquire_idle_pipe_for_head_pipe_in_layer,
.add_stream_to_ctx = dcn30_add_stream_to_ctx,
.add_dsc_to_stream_resource = dcn20_add_dsc_to_stream_resource,
.remove_stream_from_ctx = dcn20_remove_stream_from_ctx,
--
cgit v1.2.3
From 9114b55fabae5522b7124af4f16ea6ce6378aa19 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 14:27:04 -0400
Subject: drm/amd/display: Fix SubVP control flow in the MPO context
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 16 ++++++++++++++--
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 18 ------------------
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c | 6 ++++++
3 files changed, 20 insertions(+), 20 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 6216ceb790b4..40a34b600c8e 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2946,6 +2946,12 @@ static bool update_planes_and_stream_state(struct dc *dc,
dc_resource_state_copy_construct(
dc->current_state, context);
+ /* For each full update, remove all existing phantom pipes first.
+ * Ensures that we have enough pipes for newly added MPO planes
+ */
+ if (dc->res_pool->funcs->remove_phantom_pipes)
+ dc->res_pool->funcs->remove_phantom_pipes(dc, context);
+
/*remove old surfaces from context */
if (!dc_rem_all_planes_for_stream(dc, stream, context)) {
@@ -3353,8 +3359,14 @@ static void commit_planes_for_stream(struct dc *dc,
/* Since phantom pipe programming is moved to post_unlock_program_front_end,
* move the SubVP lock to after the phantom pipes have been setup
*/
- if (dc->hwss.subvp_pipe_control_lock)
- dc->hwss.subvp_pipe_control_lock(dc, context, false, should_lock_all_pipes, NULL, subvp_prev_use);
+ if (should_lock_all_pipes && dc->hwss.interdependent_update_lock) {
+ if (dc->hwss.subvp_pipe_control_lock)
+ dc->hwss.subvp_pipe_control_lock(dc, context, false, should_lock_all_pipes, NULL, subvp_prev_use);
+ } else {
+ if (dc->hwss.subvp_pipe_control_lock)
+ dc->hwss.subvp_pipe_control_lock(dc, context, false, should_lock_all_pipes, NULL, subvp_prev_use);
+ }
+
return;
}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 7de511fd004b..d732b6f031a1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1860,24 +1860,6 @@ void dcn20_post_unlock_program_front_end(
}
}
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
- struct pipe_ctx *mpcc_pipe;
-
- if (pipe->vtp_locked) {
- dc->hwseq->funcs.wait_for_blank_complete(pipe->stream_res.opp);
- pipe->plane_res.hubp->funcs->set_blank(pipe->plane_res.hubp, true);
- pipe->vtp_locked = false;
-
- for (mpcc_pipe = pipe->bottom_pipe; mpcc_pipe; mpcc_pipe = mpcc_pipe->bottom_pipe)
- mpcc_pipe->plane_res.hubp->funcs->set_blank(mpcc_pipe->plane_res.hubp, true);
-
- for (i = 0; i < dc->res_pool->pipe_count; i++)
- if (context->res_ctx.pipe_ctx[i].update_flags.bits.disable)
- dc->hwss.disable_plane(dc, &dc->current_state->res_ctx.pipe_ctx[i]);
- }
- }
-
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
struct pipe_ctx *old_pipe = &dc->current_state->res_ctx.pipe_ctx[i];
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
index 752a4accb116..9585b25f10e5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
@@ -1680,6 +1680,8 @@ static void dcn32_enable_phantom_plane(struct dc *dc,
phantom_plane->clip_rect.y = 0;
phantom_plane->clip_rect.height = phantom_stream->timing.v_addressable;
+ phantom_plane->is_phantom = true;
+
dc_add_plane_to_context(dc, phantom_stream, phantom_plane, context);
curr_pipe = curr_pipe->bottom_pipe;
@@ -1749,6 +1751,10 @@ bool dcn32_remove_phantom_pipes(struct dc *dc, struct dc_state *context)
pipe->stream->mall_stream_config.type = SUBVP_NONE;
pipe->stream->mall_stream_config.paired_stream = NULL;
}
+
+ if (pipe->plane_state) {
+ pipe->plane_state->is_phantom = false;
+ }
}
return removed_pipe;
}
--
cgit v1.2.3
From b33cd65df18f1cf60b066a02c09df92b4763bb31 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Wed, 21 Sep 2022 08:47:44 -0400
Subject: drm/amd/display: Remove OPTC lock check
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 11 -----------
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h | 1 -
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 1 -
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c | 1 -
drivers/gpu/drm/amd/display/dc/inc/core_types.h | 1 -
drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h | 1 -
6 files changed, 16 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
index ea7739255119..143a900d4d3d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
@@ -679,16 +679,6 @@ void optc1_unlock(struct timing_generator *optc)
OTG_MASTER_UPDATE_LOCK, 0);
}
-bool optc1_is_locked(struct timing_generator *optc)
-{
- struct optc *optc1 = DCN10TG_FROM_TG(optc);
- uint32_t locked;
-
- REG_GET(OTG_MASTER_UPDATE_LOCK, UPDATE_LOCK_STATUS, &locked);
-
- return (locked == 1);
-}
-
void optc1_get_position(struct timing_generator *optc,
struct crtc_position *position)
{
@@ -1583,7 +1573,6 @@ static const struct timing_generator_funcs dcn10_tg_funcs = {
.enable_crtc_reset = optc1_enable_crtc_reset,
.disable_reset_trigger = optc1_disable_reset_trigger,
.lock = optc1_lock,
- .is_locked = optc1_is_locked,
.unlock = optc1_unlock,
.enable_optc_clock = optc1_enable_optc_clock,
.set_drr = optc1_set_drr,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
index 6323ca6dc3b3..88ac5f6f4c96 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h
@@ -654,7 +654,6 @@ void optc1_set_blank(struct timing_generator *optc,
bool enable_blanking);
bool optc1_is_blanked(struct timing_generator *optc);
-bool optc1_is_locked(struct timing_generator *optc);
void optc1_program_blank_color(
struct timing_generator *optc,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index 1782b9c26cf4..02459a64ee21 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -319,7 +319,6 @@ static struct timing_generator_funcs dcn30_tg_funcs = {
.enable_crtc_reset = optc1_enable_crtc_reset,
.disable_reset_trigger = optc1_disable_reset_trigger,
.lock = optc3_lock,
- .is_locked = optc1_is_locked,
.unlock = optc1_unlock,
.lock_doublebuffer_enable = optc3_lock_doublebuffer_enable,
.lock_doublebuffer_disable = optc3_lock_doublebuffer_disable,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
index 2f7404a97479..d873def1a8f9 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
@@ -260,7 +260,6 @@ static struct timing_generator_funcs dcn31_tg_funcs = {
.enable_crtc_reset = optc1_enable_crtc_reset,
.disable_reset_trigger = optc1_disable_reset_trigger,
.lock = optc3_lock,
- .is_locked = optc1_is_locked,
.unlock = optc1_unlock,
.lock_doublebuffer_enable = optc3_lock_doublebuffer_enable,
.lock_doublebuffer_disable = optc3_lock_doublebuffer_disable,
diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
index 4ff1392633a7..1fd7ad853210 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
@@ -439,7 +439,6 @@ struct pipe_ctx {
union pipe_update_flags update_flags;
struct dwbc *dwbc;
struct mcif_wb *mcif_wb;
- bool vtp_locked;
};
/* Data used for dynamic link encoder assignment.
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 72eef7a5ed83..25a1df45b264 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -209,7 +209,6 @@ struct timing_generator_funcs {
void (*set_blank)(struct timing_generator *tg,
bool enable_blanking);
bool (*is_blanked)(struct timing_generator *tg);
- bool (*is_locked)(struct timing_generator *tg);
void (*set_overscan_blank_color) (struct timing_generator *tg, const struct tg_color *color);
void (*set_blank_color)(struct timing_generator *tg, const struct tg_color *color);
void (*set_colors)(struct timing_generator *tg,
--
cgit v1.2.3
From f1b47f0004cfff051441aa93b7115d756d5eebb7 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 15:34:55 -0400
Subject: drm/amd/display: Adding missing HDMI ACP SEND register
Add HDMI ACP bit field definition for DCN32.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
index 250d9a341cf6..e80dd2b92503 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
@@ -106,6 +106,7 @@
SE_SF(DIG0_HDMI_VBI_PACKET_CONTROL, HDMI_GC_CONT, mask_sh),\
SE_SF(DIG0_HDMI_VBI_PACKET_CONTROL, HDMI_GC_SEND, mask_sh),\
SE_SF(DIG0_HDMI_VBI_PACKET_CONTROL, HDMI_NULL_SEND, mask_sh),\
+ SE_SF(DIG0_HDMI_VBI_PACKET_CONTROL, HDMI_ACP_SEND, mask_sh),\
SE_SF(DIG0_HDMI_INFOFRAME_CONTROL0, HDMI_AUDIO_INFO_SEND, mask_sh),\
SE_SF(DIG0_HDMI_INFOFRAME_CONTROL1, HDMI_AUDIO_INFO_LINE, mask_sh),\
SE_SF(DIG0_HDMI_GC, HDMI_GC_AVMUTE, mask_sh),\
--
cgit v1.2.3
From 3f4dee59253a6882acde98a2a027e55f1330ae86 Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Fri, 23 Sep 2022 14:00:09 -0400
Subject: drm/amd/display: Fix merging dynamic ODM+MPO configs on DCN32
[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.
Reviewed-by: Martin Leung
Reviewed-by: Jun Lei
Acked-by: Hamza Mahfooz
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 5 +++++
1 file changed, 5 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index a56ee04f7df9..f3f98e9a0ce6 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1598,6 +1598,9 @@ bool dcn32_internal_validate_bw(struct dc *dc,
/*MPC split rules will handle this case*/
pipe->bottom_pipe->top_pipe = NULL;
} else {
+ /* when merging an ODM pipes, the bottom MPC pipe must now point to
+ * the previous ODM pipe and its associated stream assets
+ */
if (pipe->prev_odm_pipe->bottom_pipe) {
/* 3 plane MPO*/
pipe->bottom_pipe->top_pipe = pipe->prev_odm_pipe->bottom_pipe;
@@ -1607,6 +1610,8 @@ bool dcn32_internal_validate_bw(struct dc *dc,
pipe->bottom_pipe->top_pipe = pipe->prev_odm_pipe;
pipe->prev_odm_pipe->bottom_pipe = pipe->bottom_pipe;
}
+
+ memcpy(&pipe->bottom_pipe->stream_res, &pipe->bottom_pipe->top_pipe->stream_res, sizeof(struct stream_resource));
}
}
--
cgit v1.2.3
From fe674c0b6f5382b7c377ca2c418c26dd78b428b4 Mon Sep 17 00:00:00 2001
From: Eric Bernstein
Date: Tue, 25 Jan 2022 14:42:12 -0500
Subject: drm/amd/display: Fix disable DSC logic in the DIO code
[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)
[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr
Reviewed-by: Rodrigo Siqueira
Signed-off-by: Eric Bernstein
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
index 40e713c4e172..d19fc93dbc75 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.c
@@ -388,7 +388,7 @@ static void enc32_dp_set_dsc_config(struct stream_encoder *enc,
{
struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
- REG_UPDATE(DP_DSC_CNTL, DP_DSC_MODE, dsc_mode);
+ REG_UPDATE(DP_DSC_CNTL, DP_DSC_MODE, dsc_mode == OPTC_DSC_DISABLED ? 0 : 1);
}
/* this function read dsc related register fields to be logged later in dcn10_log_hw_state
--
cgit v1.2.3
From f638fe27b817c755e017b8a6ae4b9b4224461941 Mon Sep 17 00:00:00 2001
From: George Shen
Date: Thu, 2 Jun 2022 11:10:25 -0400
Subject: drm/amd/display: Add missing SDP registers to DCN32 reglist
[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.
The DCN32 DIO stream encoder reglist is currently missing these two
registers.
[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.
Reviewed-by: Rodrigo Siqueira
Signed-off-by: George Shen
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h | 2 ++
1 file changed, 2 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
index e80dd2b92503..20e5f016a45a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_stream_encoder.h
@@ -71,7 +71,9 @@
SRI(DP_MSE_RATE_UPDATE, DP, id), \
SRI(DP_PIXEL_FORMAT, DP, id), \
SRI(DP_SEC_CNTL, DP, id), \
+ SRI(DP_SEC_CNTL1, DP, id), \
SRI(DP_SEC_CNTL2, DP, id), \
+ SRI(DP_SEC_CNTL5, DP, id), \
SRI(DP_SEC_CNTL6, DP, id), \
SRI(DP_STEER_FIFO, DP, id), \
SRI(DP_VID_M, DP, id), \
--
cgit v1.2.3
From 46c87432e3d4cea8e1a7ac6e9e3ebd2462f47617 Mon Sep 17 00:00:00 2001
From: Wenjing Liu
Date: Thu, 23 Jun 2022 16:09:25 -0400
Subject: drm/amd/display: Add missing mask sh for SYM32_TP_SQ_PULSE register
There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.
Reviewed-by: Rodrigo Siqueira
Signed-off-by: Wenjing Liu
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hpo_dp_link_encoder.h | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hpo_dp_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hpo_dp_link_encoder.h
index 9db1323e1933..176b1537d2a1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hpo_dp_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hpo_dp_link_encoder.h
@@ -47,6 +47,7 @@
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_TP_CONFIG, TP_PRBS_SEL1, mask_sh),\
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_TP_CONFIG, TP_PRBS_SEL2, mask_sh),\
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_TP_CONFIG, TP_PRBS_SEL3, mask_sh),\
+ SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_TP_SQ_PULSE, TP_SQ_PULSE_WIDTH, mask_sh),\
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_SAT_VC0, SAT_STREAM_SOURCE, mask_sh),\
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_SAT_VC0, SAT_SLOT_COUNT, mask_sh),\
SE_SF(DP_DPHY_SYM320_DP_DPHY_SYM32_VC_RATE_CNTL0, STREAM_VC_RATE_X, mask_sh),\
--
cgit v1.2.3
From e626d9b9c6e038a6918aad1b5affd38f6b9deaed Mon Sep 17 00:00:00 2001
From: Sonny Jiang
Date: Fri, 30 Sep 2022 16:23:32 -0400
Subject: drm/amdgpu: Enable VCN PG on GC11_0_1
Enable VCN PG on GC11_0_1
Signed-off-by: Sonny Jiang
Reviewed-by: James Zhu
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 6.0.x
---
drivers/gpu/drm/amd/amdgpu/soc21.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c
index 16b757664a35..795706b3b092 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc21.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc21.c
@@ -629,6 +629,7 @@ static int soc21_common_early_init(void *handle)
AMD_CG_SUPPORT_JPEG_MGCG;
adev->pg_flags =
AMD_PG_SUPPORT_GFX_PG |
+ AMD_PG_SUPPORT_VCN |
AMD_PG_SUPPORT_VCN_DPG |
AMD_PG_SUPPORT_JPEG;
adev->external_rev_id = adev->rev_id + 0x1;
--
cgit v1.2.3
From 11895d32ffddb50152f0a1e671d36b7f60e4daba Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 15:46:58 -0400
Subject: drm/amd/display: Add PState change high hook for DCN32
For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c
index f6d3da475835..9fbb72369c10 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c
@@ -936,6 +936,7 @@ static const struct hubbub_funcs hubbub32_funcs = {
.program_watermarks = hubbub32_program_watermarks,
.allow_self_refresh_control = hubbub1_allow_self_refresh_control,
.is_allow_self_refresh_enabled = hubbub1_is_allow_self_refresh_enabled,
+ .verify_allow_pstate_change_high = hubbub1_verify_allow_pstate_change_high,
.force_wm_propagate_to_pipes = hubbub32_force_wm_propagate_to_pipes,
.force_pstate_change_control = hubbub3_force_pstate_change_control,
.init_watermarks = hubbub32_init_watermarks,
--
cgit v1.2.3
From 54fae65ff469a79fc0ca46f480c4e7fce50f3963 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Tue, 20 Sep 2022 16:06:36 -0400
Subject: drm/amd/display: Enable 2 to 1 ODM policy if supported
If the current configuration supports 2 to 1 ODM policy, let's also
enable the windowed MPO feature.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 6.0.x
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 4 ++++
1 file changed, 4 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index 8012a48859b5..218927d6ecb2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -991,6 +991,10 @@ void dcn32_init_hw(struct dc *dc)
dc_dmub_srv_query_caps_cmd(dc->ctx->dmub_srv->dmub);
dc->caps.dmub_caps.psr = dc->ctx->dmub_srv->dmub->feature_caps.psr;
}
+
+ /* Enable support for ODM and windowed MPO if policy flag is set */
+ if (dc->debug.enable_single_display_2to1_odm_policy)
+ dc->config.enable_windowed_mpo_odm = true;
}
static int calc_mpc_flow_ctrl_cnt(const struct dc_stream_state *stream,
--
cgit v1.2.3
From 36939c94689ae7e6aaa9a0fa37e5c41616f76665 Mon Sep 17 00:00:00 2001
From: Aric Cyr
Date: Mon, 26 Sep 2022 10:21:48 -0400
Subject: drm/amd/display: 3.2.206
This version brings along the following:
- ILR improvements
- PSR fixes
- DCN315 fixes
- DCN32 fixes
- ODM fixes
- DSC fixes
- SubVP fixes
Reviewed-by: Hamza Mahfooz
Signed-off-by: Aric Cyr
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 458a4f431ac6..66b7482d2e72 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -47,7 +47,7 @@ struct aux_payload;
struct set_config_cmd_payload;
struct dmub_notification;
-#define DC_VER "3.2.205"
+#define DC_VER "3.2.206"
#define MAX_SURFACES 3
#define MAX_PLANES 6
--
cgit v1.2.3
From 9691a7a776302c85c10294f1a92c15c7f57a5947 Mon Sep 17 00:00:00 2001
From: Martin Leung
Date: Mon, 23 May 2022 14:57:30 -0400
Subject: drm/amd/display: unblock mcm_luts
why and how:
needed to fix bad assumption for enable mcm_luts
Reviewed-by: Rodrigo Siqueira
Signed-off-by: Martin Leung
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index 218927d6ecb2..33bdf56b2b3a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -630,10 +630,9 @@ bool dcn32_set_input_transfer_func(struct dc *dc,
params = &dpp_base->degamma_params;
}
- result = dpp_base->funcs->dpp_program_gamcor_lut(dpp_base, params);
+ dpp_base->funcs->dpp_program_gamcor_lut(dpp_base, params);
- if (result &&
- pipe_ctx->stream_res.opp &&
+ if (pipe_ctx->stream_res.opp &&
pipe_ctx->stream_res.opp->ctx &&
hws->funcs.set_mcm_luts)
result = hws->funcs.set_mcm_luts(pipe_ctx, plane_state);
--
cgit v1.2.3
From 07ebc18c047adcd72905619e72ae7c48db28ab48 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Thu, 22 Sep 2022 09:24:12 -0400
Subject: drm/amd/display: Disconnect DSC for unused pipes during ODM
transition
[Why]
During transition from ODM combine to ODM bypass, if DSC is enabled need
to disconnect the DSC mux for pipes no longer in use.
[How]
During ODM update, detect pipes with DSC that are no longer being used
for new state and call new DSC interface to disconnect.
Add new DSC interface to disconnect from pipe
Reviewed-by: Alvin Lee
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index 33bdf56b2b3a..955ca273cfe1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1148,16 +1148,19 @@ void dcn32_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx *
true);
}
- // Don't program pixel clock after link is already enabled
-/* if (false == pipe_ctx->clock_source->funcs->program_pix_clk(
- pipe_ctx->clock_source,
- &pipe_ctx->stream_res.pix_clk_params,
- &pipe_ctx->pll_settings)) {
- BREAK_TO_DEBUGGER();
- }*/
+ if (pipe_ctx->stream_res.dsc) {
+ struct pipe_ctx *current_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[pipe_ctx->pipe_idx];
- if (pipe_ctx->stream_res.dsc)
update_dsc_on_stream(pipe_ctx, pipe_ctx->stream->timing.flags.DSC);
+
+ /* Check if no longer using pipe for ODM, then need to disconnect DSC for that pipe */
+ if (!pipe_ctx->next_odm_pipe && current_pipe_ctx->next_odm_pipe &&
+ current_pipe_ctx->next_odm_pipe->stream_res.dsc) {
+ struct display_stream_compressor *dsc = current_pipe_ctx->next_odm_pipe->stream_res.dsc;
+ /* disconnect DSC block from stream */
+ dsc->funcs->dsc_disconnect(dsc);
+ }
+ }
}
unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsigned int *k1_div, unsigned int *k2_div)
--
cgit v1.2.3
From a3daede47576037ff7bbbe9cbd36e52a71d92bc8 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Thu, 22 Sep 2022 10:06:48 -0400
Subject: drm/amd/display: update DSC for DCN32
Update DSC checks in the DCN32 VBA.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
index 75be1e1ce543..8316b1b914c6 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
@@ -2252,9 +2252,8 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
for (k = 0; k <= mode_lib->vba.NumberOfActiveSurfaces - 1; k++) {
if (!(mode_lib->vba.DSCInputBitPerComponent[k] == 12.0
|| mode_lib->vba.DSCInputBitPerComponent[k] == 10.0
- || mode_lib->vba.DSCInputBitPerComponent[k] == 8.0
- || mode_lib->vba.DSCInputBitPerComponent[k] >
- mode_lib->vba.MaximumDSCBitsPerComponent)) {
+ || mode_lib->vba.DSCInputBitPerComponent[k] == 8.0)
+ || mode_lib->vba.DSCInputBitPerComponent[k] > mode_lib->vba.MaximumDSCBitsPerComponent) {
mode_lib->vba.NonsupportedDSCInputBPC = true;
}
}
@@ -2330,16 +2329,15 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
if (mode_lib->vba.OutputMultistreamId[k] == k && mode_lib->vba.ForcedOutputLinkBPP[k] == 0)
mode_lib->vba.BPPForMultistreamNotIndicated = true;
for (j = 0; j < mode_lib->vba.NumberOfActiveSurfaces; ++j) {
- if (mode_lib->vba.OutputMultistreamId[k] == j && mode_lib->vba.OutputMultistreamEn[k]
+ if (mode_lib->vba.OutputMultistreamId[k] == j
&& mode_lib->vba.ForcedOutputLinkBPP[k] == 0)
mode_lib->vba.BPPForMultistreamNotIndicated = true;
}
}
if ((mode_lib->vba.Output[k] == dm_edp || mode_lib->vba.Output[k] == dm_hdmi)) {
- if (mode_lib->vba.OutputMultistreamId[k] == k && mode_lib->vba.OutputMultistreamEn[k])
+ if (mode_lib->vba.OutputMultistreamEn[k] == true && mode_lib->vba.OutputMultistreamId[k] == k)
mode_lib->vba.MultistreamWithHDMIOreDP = true;
-
for (j = 0; j < mode_lib->vba.NumberOfActiveSurfaces; ++j) {
if (mode_lib->vba.OutputMultistreamEn[k] == true && mode_lib->vba.OutputMultistreamId[k] == j)
mode_lib->vba.MultistreamWithHDMIOreDP = true;
--
cgit v1.2.3
From 7e6d5cf8e3e3f8050de52a28236d5a172caf2da9 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira
Date: Thu, 22 Sep 2022 10:08:11 -0400
Subject: drm/amd/display: Minor code style change
This commit adds some minor code style changes just to reduce the merge
conflicts we have when we upstream some of the VBA code.
Reviewed-by: Aurabindo Pillai
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
index 8316b1b914c6..11d5750e15af 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
@@ -2476,8 +2476,6 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
mode_lib->vba.PixelClock[k], mode_lib->vba.PixelClockBackEnd[k]);
}
- m = 0;
-
for (k = 0; k <= mode_lib->vba.NumberOfActiveSurfaces - 1; k++) {
for (m = 0; m <= mode_lib->vba.NumberOfActiveSurfaces - 1; m++) {
for (j = 0; j <= mode_lib->vba.NumberOfActiveSurfaces - 1; j++) {
@@ -2854,8 +2852,6 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
}
}
- m = 0;
-
//Calculate Return BW
for (i = 0; i < (int) v->soc.num_states; ++i) {
for (j = 0; j <= 1; ++j) {
@@ -3616,11 +3612,10 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
mode_lib->vba.ModeIsSupported = mode_lib->vba.ModeSupport[i][0] == true
|| mode_lib->vba.ModeSupport[i][1] == true;
- if (mode_lib->vba.ModeSupport[i][0] == true) {
+ if (mode_lib->vba.ModeSupport[i][0] == true)
MaximumMPCCombine = 0;
- } else {
+ else
MaximumMPCCombine = 1;
- }
}
}
--
cgit v1.2.3
From 95c985ffc63e2a7d8f6aa18f9351f5010a8d1adb Mon Sep 17 00:00:00 2001
From: Yang Li
Date: Fri, 30 Sep 2022 13:38:58 +0800
Subject: drm/amd/display: clean up one inconsistent indenting
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238
Reported-by: Abaci Robot
Signed-off-by: Yang Li
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
index 6658849d5b4e..61087f2385a9 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c
@@ -1654,7 +1654,7 @@ static bool dcn321_resource_construct(
#undef REG_STRUCT
#define REG_STRUCT dccg_regs
- dccg_regs_init();
+ dccg_regs_init();
ctx->dc_bios->regs = &bios_regs;
--
cgit v1.2.3
From 8c39634d28fa460869702b9801d2efe06671b342 Mon Sep 17 00:00:00 2001
From: Yang Li
Date: Fri, 30 Sep 2022 13:38:59 +0800
Subject: drm/amd/display: clean up one inconsistent indenting
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321
Reported-by: Abaci Robot
Signed-off-by: Yang Li
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
index 559e563d5bc1..f04595b750ab 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
@@ -852,7 +852,7 @@ static struct hubbub *dcn301_hubbub_create(struct dc_context *ctx)
vmid->masks = &vmid_masks;
}
- hubbub3->num_vmid = res_cap_dcn301.num_vmid;
+ hubbub3->num_vmid = res_cap_dcn301.num_vmid;
return &hubbub3->base;
}
--
cgit v1.2.3
From 525530ad9a7ec9aa34266e1429cc5ef9acb58e6c Mon Sep 17 00:00:00 2001
From: Yang Yingliang
Date: Thu, 29 Sep 2022 22:20:15 +0800
Subject: drm/amdgpu/sdma: add missing release_firmware() in
amdgpu_sdma_init_microcode()
In some error path in amdgpu_sdma_init_microcode(), release_firmware() is
not called, the memory allocated in request_firmware() will be leaked,
calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to
avoid memory leak.
Fixes: 15aa13056d11da ("drm/amdgpu: add function to init SDMA microcode")
Signed-off-by: Yang Yingliang
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c
index 3949b7e3907f..43cf8632cc1a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c
@@ -222,8 +222,10 @@ int amdgpu_sdma_init_microcode(struct amdgpu_device *adev,
adev->sdma.instance[instance].fw->data;
version_major = le16_to_cpu(header->header_version_major);
- if ((duplicate && instance) || (!duplicate && version_major > 1))
- return -EINVAL;
+ if ((duplicate && instance) || (!duplicate && version_major > 1)) {
+ err = -EINVAL;
+ goto out;
+ }
err = amdgpu_sdma_init_inst_ctx(&adev->sdma.instance[instance]);
if (err)
@@ -272,7 +274,7 @@ int amdgpu_sdma_init_microcode(struct amdgpu_device *adev,
ALIGN(le32_to_cpu(sdma_hdr->ctl_ucode_size_bytes), PAGE_SIZE);
break;
default:
- return -EINVAL;
+ err = -EINVAL;
}
}
--
cgit v1.2.3
From 21a550de5faf9f54013334c9a6a7643b8fd80b36 Mon Sep 17 00:00:00 2001
From: Ruili Ji
Date: Mon, 3 Oct 2022 17:39:45 +0800
Subject: drm/amdgpu: Enable F32_WPTR_POLL_ENABLE in mqd
This patch is to fix the SDMA user queue doorbell missing issue on
SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is
used. Otherwise ringing SDMA user queue doorbell can't wake up
system from gfxoff.
Signed-off-by: Ruili Ji
Reviewed-by: Yifan Zhang
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 6.0.x
---
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c | 3 ++-
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v11.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c
index db51230163c5..0150f66a5ae6 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c
@@ -846,7 +846,8 @@ static int sdma_v6_0_mqd_init(struct amdgpu_device *adev, void *mqd,
m->sdmax_rlcx_rb_cntl =
order_base_2(prop->queue_size / 4) << SDMA0_QUEUE0_RB_CNTL__RB_SIZE__SHIFT |
1 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_ENABLE__SHIFT |
- 4 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_TIMER__SHIFT;
+ 4 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_TIMER__SHIFT |
+ 1 << SDMA0_QUEUE0_RB_CNTL__F32_WPTR_POLL_ENABLE__SHIFT;
m->sdmax_rlcx_rb_base = lower_32_bits(prop->hqd_base_gpu_addr >> 8);
m->sdmax_rlcx_rb_base_hi = upper_32_bits(prop->hqd_base_gpu_addr >> 8);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v11.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v11.c
index 26b53b6d673e..4f6390f3236e 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v11.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v11.c
@@ -333,7 +333,8 @@ static void update_mqd_sdma(struct mqd_manager *mm, void *mqd,
<< SDMA0_QUEUE0_RB_CNTL__RB_SIZE__SHIFT |
q->vmid << SDMA0_QUEUE0_RB_CNTL__RB_VMID__SHIFT |
1 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_ENABLE__SHIFT |
- 6 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_TIMER__SHIFT;
+ 6 << SDMA0_QUEUE0_RB_CNTL__RPTR_WRITEBACK_TIMER__SHIFT |
+ 1 << SDMA0_QUEUE0_RB_CNTL__F32_WPTR_POLL_ENABLE__SHIFT;
m->sdmax_rlcx_rb_base = lower_32_bits(q->queue_address >> 8);
m->sdmax_rlcx_rb_base_hi = upper_32_bits(q->queue_address >> 8);
--
cgit v1.2.3
From f6aa84b83aee629fbbbc4ea16c2c142caf920d5a Mon Sep 17 00:00:00 2001
From: Roman Li
Date: Thu, 29 Sep 2022 14:37:00 -0400
Subject: drm/amd/display: Enable dpia support for dcn314
[Why]
DCN 3.1.4 supports DPIA.
[How]
- Set dpia_supported flag for dcn314 in dmub_hw_init()
- Remove comment that becomes irrelevant after this change.
Signed-off-by: Roman Li
Reviewed-by: Nicholas Kazlauskas
Reviewed-by: Mario Limonciello
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 6.0.x
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 4c73727e0b7d..d5222d5e3a61 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1110,7 +1110,8 @@ static int dm_dmub_hw_init(struct amdgpu_device *adev)
hw_params.fb[i] = &fb_info->fb[i];
switch (adev->ip_versions[DCE_HWIP][0]) {
- case IP_VERSION(3, 1, 3): /* Only for this asic hw internal rev B0 */
+ case IP_VERSION(3, 1, 3):
+ case IP_VERSION(3, 1, 4):
hw_params.dpia_supported = true;
hw_params.disable_dpia = adev->dm.dc->debug.dpia_debug.bits.disable_dpia;
break;
--
cgit v1.2.3
From 8799c0be89ebb99a16098bdf618f49f817bef76a Mon Sep 17 00:00:00 2001
From: Yunxiang Li
Date: Wed, 21 Sep 2022 17:20:19 -0400
Subject: drm/amd/display: Fix vblank refcount in vrr transition
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on
which causes drm_crtc_vblank_get in vrr_transition to fail, and later
when drm_crtc_vblank_put is called the refcount on vblank will be messed
up. Therefore move the call to after manage_dm_interrupts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380
Tested-by: Daniel Wheeler
Reviewed-by: Rodrigo Siqueira
Signed-off-by: Yunxiang Li
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 55 +++++++++++------------
1 file changed, 26 insertions(+), 29 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index d5222d5e3a61..b84aedb707b8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7479,15 +7479,15 @@ static void amdgpu_dm_handle_vrr_transition(struct dm_crtc_state *old_state,
* We also need vupdate irq for the actual core vblank handling
* at end of vblank.
*/
- dm_set_vupdate_irq(new_state->base.crtc, true);
- drm_crtc_vblank_get(new_state->base.crtc);
+ WARN_ON(dm_set_vupdate_irq(new_state->base.crtc, true) != 0);
+ WARN_ON(drm_crtc_vblank_get(new_state->base.crtc) != 0);
DRM_DEBUG_DRIVER("%s: crtc=%u VRR off->on: Get vblank ref\n",
__func__, new_state->base.crtc->base.id);
} else if (old_vrr_active && !new_vrr_active) {
/* Transition VRR active -> inactive:
* Allow vblank irq disable again for fixed refresh rate.
*/
- dm_set_vupdate_irq(new_state->base.crtc, false);
+ WARN_ON(dm_set_vupdate_irq(new_state->base.crtc, false) != 0);
drm_crtc_vblank_put(new_state->base.crtc);
DRM_DEBUG_DRIVER("%s: crtc=%u VRR on->off: Drop vblank ref\n",
__func__, new_state->base.crtc->base.id);
@@ -8243,23 +8243,6 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
mutex_unlock(&dm->dc_lock);
}
- /* Count number of newly disabled CRTCs for dropping PM refs later. */
- for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
- new_crtc_state, i) {
- if (old_crtc_state->active && !new_crtc_state->active)
- crtc_disable_count++;
-
- dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
- dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
-
- /* For freesync config update on crtc state and params for irq */
- update_stream_irq_parameters(dm, dm_new_crtc_state);
-
- /* Handle vrr on->off / off->on transitions */
- amdgpu_dm_handle_vrr_transition(dm_old_crtc_state,
- dm_new_crtc_state);
- }
-
/**
* Enable interrupts for CRTCs that are newly enabled or went through
* a modeset. It was intentionally deferred until after the front end
@@ -8269,16 +8252,29 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc);
#ifdef CONFIG_DEBUG_FS
- bool configure_crc = false;
enum amdgpu_dm_pipe_crc_source cur_crc_src;
#if defined(CONFIG_DRM_AMD_SECURE_DISPLAY)
- struct crc_rd_work *crc_rd_wrk = dm->crc_rd_wrk;
+ struct crc_rd_work *crc_rd_wrk;
+#endif
+#endif
+ /* Count number of newly disabled CRTCs for dropping PM refs later. */
+ if (old_crtc_state->active && !new_crtc_state->active)
+ crtc_disable_count++;
+
+ dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
+ dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
+
+ /* For freesync config update on crtc state and params for irq */
+ update_stream_irq_parameters(dm, dm_new_crtc_state);
+
+#ifdef CONFIG_DEBUG_FS
+#if defined(CONFIG_DRM_AMD_SECURE_DISPLAY)
+ crc_rd_wrk = dm->crc_rd_wrk;
#endif
spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags);
cur_crc_src = acrtc->dm_irq_params.crc_src;
spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags);
#endif
- dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
if (new_crtc_state->active &&
(!old_crtc_state->active ||
@@ -8286,16 +8282,19 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
dc_stream_retain(dm_new_crtc_state->stream);
acrtc->dm_irq_params.stream = dm_new_crtc_state->stream;
manage_dm_interrupts(adev, acrtc, true);
+ }
+ /* Handle vrr on->off / off->on transitions */
+ amdgpu_dm_handle_vrr_transition(dm_old_crtc_state, dm_new_crtc_state);
#ifdef CONFIG_DEBUG_FS
+ if (new_crtc_state->active &&
+ (!old_crtc_state->active ||
+ drm_atomic_crtc_needs_modeset(new_crtc_state))) {
/**
* Frontend may have changed so reapply the CRC capture
* settings for the stream.
*/
- dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
-
if (amdgpu_dm_is_valid_crc_source(cur_crc_src)) {
- configure_crc = true;
#if defined(CONFIG_DRM_AMD_SECURE_DISPLAY)
if (amdgpu_dm_crc_window_is_activated(crtc)) {
spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags);
@@ -8307,12 +8306,10 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags);
}
#endif
- }
-
- if (configure_crc)
if (amdgpu_dm_crtc_configure_crc_source(
crtc, dm_new_crtc_state, cur_crc_src))
DRM_DEBUG_DRIVER("Failed to configure crc source");
+ }
#endif
}
}
--
cgit v1.2.3
From 7d30ccc7761cfcd6756aa0b760c5f5493038d30a Mon Sep 17 00:00:00 2001
From: Randy Dunlap
Date: Fri, 30 Sep 2022 21:33:54 -0700
Subject: drm/amd/display: clean up dcn32_fpu.c kernel-doc
Rectify multiple kernel-doc warnings in dcn32_fpu.c.
E.g.:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds dummy_latency_index when MCLK switching using firmware based
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead
Reviewed-by: Rodrigo Siqueira
Reported-by: kernel test robot
Signed-off-by: Randy Dunlap
Signed-off-by: Rodrigo Siqueira
Cc: George Shen
Cc: Alvin Lee
Cc: Nevenko Stupar
Cc: Harry Wentland
Cc: Leo Li
Cc: Rodrigo Siqueira
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher
Cc: Christian König
Cc: "Pan, Xinhui"
Signed-off-by: Alex Deucher
---
.../gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 116 +++++++++------------
1 file changed, 49 insertions(+), 67 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index f3f98e9a0ce6..6bdd509d292a 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -243,7 +243,7 @@ void dcn32_build_wm_range_table_fpu(struct clk_mgr_internal *clk_mgr)
clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_uclk = 0xFFFF;
}
-/**
+/*
* Finds dummy_latency_index when MCLK switching using firmware based
* vblank stretch is enabled. This function will iterate through the
* table of dummy pstate latencies until the lowest value that allows
@@ -290,15 +290,14 @@ int dcn32_find_dummy_latency_index_for_fw_based_mclk_switch(struct dc *dc,
/**
* dcn32_helper_populate_phantom_dlg_params - Get DLG params for phantom pipes
* and populate pipe_ctx with those params.
- *
- * This function must be called AFTER the phantom pipes are added to context
- * and run through DML (so that the DLG params for the phantom pipes can be
- * populated), and BEFORE we program the timing for the phantom pipes.
- *
* @dc: [in] current dc state
* @context: [in] new dc state
* @pipes: [in] DML pipe params array
* @pipe_cnt: [in] DML pipe count
+ *
+ * This function must be called AFTER the phantom pipes are added to context
+ * and run through DML (so that the DLG params for the phantom pipes can be
+ * populated), and BEFORE we program the timing for the phantom pipes.
*/
void dcn32_helper_populate_phantom_dlg_params(struct dc *dc,
struct dc_state *context,
@@ -331,8 +330,9 @@ void dcn32_helper_populate_phantom_dlg_params(struct dc *dc,
}
/**
- * *******************************************************************************************
- * dcn32_predict_pipe_split: Predict if pipe split will occur for a given DML pipe
+ * dcn32_predict_pipe_split - Predict if pipe split will occur for a given DML pipe
+ * @context: [in] New DC state to be programmed
+ * @pipe_e2e: [in] DML pipe end to end context
*
* This function takes in a DML pipe (pipe_e2e) and predicts if pipe split is required (both
* ODM and MPC). For pipe split, ODM combine is determined by the ODM mode, and MPC combine is
@@ -343,12 +343,7 @@ void dcn32_helper_populate_phantom_dlg_params(struct dc *dc,
* - MPC combine is only chosen if there is no ODM combine requirements / policy in place, and
* MPC is required
*
- * @param [in]: context: New DC state to be programmed
- * @param [in]: pipe_e2e: DML pipe end to end context
- *
- * @return: Number of splits expected (1 for 2:1 split, 3 for 4:1 split, 0 for no splits).
- *
- * *******************************************************************************************
+ * Return: Number of splits expected (1 for 2:1 split, 3 for 4:1 split, 0 for no splits).
*/
uint8_t dcn32_predict_pipe_split(struct dc_state *context,
display_e2e_pipe_params_st *pipe_e2e)
@@ -504,7 +499,14 @@ void insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *table,
}
/**
- * dcn32_set_phantom_stream_timing: Set timing params for the phantom stream
+ * dcn32_set_phantom_stream_timing - Set timing params for the phantom stream
+ * @dc: current dc state
+ * @context: new dc state
+ * @ref_pipe: Main pipe for the phantom stream
+ * @phantom_stream: target phantom stream state
+ * @pipes: DML pipe params
+ * @pipe_cnt: number of DML pipes
+ * @dc_pipe_idx: DC pipe index for the main pipe (i.e. ref_pipe)
*
* Set timing params of the phantom stream based on calculated output from DML.
* This function first gets the DML pipe index using the DC pipe index, then
@@ -517,13 +519,6 @@ void insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *table,
* that separately.
*
* - Set phantom backporch = vstartup of main pipe
- *
- * @dc: current dc state
- * @context: new dc state
- * @ref_pipe: Main pipe for the phantom stream
- * @pipes: DML pipe params
- * @pipe_cnt: number of DML pipes
- * @dc_pipe_idx: DC pipe index for the main pipe (i.e. ref_pipe)
*/
void dcn32_set_phantom_stream_timing(struct dc *dc,
struct dc_state *context,
@@ -592,16 +587,14 @@ void dcn32_set_phantom_stream_timing(struct dc *dc,
}
/**
- * dcn32_get_num_free_pipes: Calculate number of free pipes
+ * dcn32_get_num_free_pipes - Calculate number of free pipes
+ * @dc: current dc state
+ * @context: new dc state
*
* This function assumes that a "used" pipe is a pipe that has
* both a stream and a plane assigned to it.
*
- * @dc: current dc state
- * @context: new dc state
- *
- * Return:
- * Number of free pipes available in the context
+ * Return: Number of free pipes available in the context
*/
static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *context)
{
@@ -625,7 +618,10 @@ static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *con
}
/**
- * dcn32_assign_subvp_pipe: Function to decide which pipe will use Sub-VP.
+ * dcn32_assign_subvp_pipe - Function to decide which pipe will use Sub-VP.
+ * @dc: current dc state
+ * @context: new dc state
+ * @index: [out] dc pipe index for the pipe chosen to have phantom pipes assigned
*
* We enter this function if we are Sub-VP capable (i.e. enough pipes available)
* and regular P-State switching (i.e. VACTIVE/VBLANK) is not supported, or if
@@ -639,12 +635,7 @@ static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *con
* for determining which should be the SubVP pipe (need a way to determine if a pipe / plane doesn't
* support MCLK switching naturally [i.e. ACTIVE or VBLANK]).
*
- * @param dc: current dc state
- * @param context: new dc state
- * @param index: [out] dc pipe index for the pipe chosen to have phantom pipes assigned
- *
- * Return:
- * True if a valid pipe assignment was found for Sub-VP. Otherwise false.
+ * Return: True if a valid pipe assignment was found for Sub-VP. Otherwise false.
*/
static bool dcn32_assign_subvp_pipe(struct dc *dc,
struct dc_state *context,
@@ -711,7 +702,9 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc,
}
/**
- * dcn32_enough_pipes_for_subvp: Function to check if there are "enough" pipes for SubVP.
+ * dcn32_enough_pipes_for_subvp - Function to check if there are "enough" pipes for SubVP.
+ * @dc: current dc state
+ * @context: new dc state
*
* This function returns true if there are enough free pipes
* to create the required phantom pipes for any given stream
@@ -723,9 +716,6 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc,
* pipe which can be used as the phantom pipe for the non pipe
* split pipe.
*
- * @dc: current dc state
- * @context: new dc state
- *
* Return:
* True if there are enough free pipes to assign phantom pipes to at least one
* stream that does not already have phantom pipes assigned. Otherwise false.
@@ -764,7 +754,9 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context
}
/**
- * subvp_subvp_schedulable: Determine if SubVP + SubVP config is schedulable
+ * subvp_subvp_schedulable - Determine if SubVP + SubVP config is schedulable
+ * @dc: current dc state
+ * @context: new dc state
*
* High level algorithm:
* 1. Find longest microschedule length (in us) between the two SubVP pipes
@@ -772,11 +764,7 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context
* pipes still allows for the maximum microschedule to fit in the active
* region for both pipes.
*
- * @dc: current dc state
- * @context: new dc state
- *
- * Return:
- * bool - True if the SubVP + SubVP config is schedulable, false otherwise
+ * Return: True if the SubVP + SubVP config is schedulable, false otherwise
*/
static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context)
{
@@ -836,7 +824,10 @@ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context)
}
/**
- * subvp_drr_schedulable: Determine if SubVP + DRR config is schedulable
+ * subvp_drr_schedulable - Determine if SubVP + DRR config is schedulable
+ * @dc: current dc state
+ * @context: new dc state
+ * @drr_pipe: DRR pipe_ctx for the SubVP + DRR config
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and DRR pipe
@@ -845,12 +836,7 @@ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context)
* 3.If (SubVP Active - Prefetch > Stretched DRR frame + max(MALL region, Stretched DRR frame))
* then report the configuration as supported
*
- * @dc: current dc state
- * @context: new dc state
- * @drr_pipe: DRR pipe_ctx for the SubVP + DRR config
- *
- * Return:
- * bool - True if the SubVP + DRR config is schedulable, false otherwise
+ * Return: True if the SubVP + DRR config is schedulable, false otherwise
*/
static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struct pipe_ctx *drr_pipe)
{
@@ -914,7 +900,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struc
/**
- * subvp_vblank_schedulable: Determine if SubVP + VBLANK config is schedulable
+ * subvp_vblank_schedulable - Determine if SubVP + VBLANK config is schedulable
+ * @dc: current dc state
+ * @context: new dc state
*
* High level algorithm:
* 1. Get timing for SubVP pipe, phantom pipe, and VBLANK pipe
@@ -922,11 +910,7 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struc
* then report the configuration as supported
* 3. If the VBLANK display is DRR, then take the DRR static schedulability path
*
- * @dc: current dc state
- * @context: new dc state
- *
- * Return:
- * bool - True if the SubVP + VBLANK/DRR config is schedulable, false otherwise
+ * Return: True if the SubVP + VBLANK/DRR config is schedulable, false otherwise
*/
static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)
{
@@ -1003,20 +987,18 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)
}
/**
- * subvp_validate_static_schedulability: Check which SubVP case is calculated and handle
- * static analysis based on the case.
+ * subvp_validate_static_schedulability - Check which SubVP case is calculated
+ * and handle static analysis based on the case.
+ * @dc: current dc state
+ * @context: new dc state
+ * @vlevel: Voltage level calculated by DML
*
* Three cases:
* 1. SubVP + SubVP
* 2. SubVP + VBLANK (DRR checked internally)
* 3. SubVP + VACTIVE (currently unsupported)
*
- * @dc: current dc state
- * @context: new dc state
- * @vlevel: Voltage level calculated by DML
- *
- * Return:
- * bool - True if statically schedulable, false otherwise
+ * Return: True if statically schedulable, false otherwise
*/
static bool subvp_validate_static_schedulability(struct dc *dc,
struct dc_state *context,
@@ -2281,7 +2263,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params,
return 0;
}
-/**
+/*
* dcn32_update_bw_bounding_box
*
* This would override some dcn3_2 ip_or_soc initial parameters hardcoded from
--
cgit v1.2.3
From 5e69732d4a89928b7daaa651ad869cebee28bfff Mon Sep 17 00:00:00 2001
From: Dong Chenchen
Date: Fri, 30 Sep 2022 14:38:27 +0800
Subject: drm/amd/display: Removed unused variable 'sdp_stream_enable'
Kernel test robot throws below warning ->
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:
In function 'dcn31_hpo_dp_stream_enc_update_dp_info_packets':
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:439:14:
warning: variable 'sdp_stream_enable' set but not used
[-Wunused-but-set-variable]
439 | bool sdp_stream_enable = false;
Removed unused variable 'sdp_stream_enable'.
Reviewed-by: Rodrigo Siqueira
Reported-by: kernel test robot
Signed-off-by: Dong Chenchen
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
.../amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
index d71d89268a07..814f401db3b3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
@@ -436,32 +436,28 @@ static void dcn31_hpo_dp_stream_enc_update_dp_info_packets(
{
struct dcn31_hpo_dp_stream_encoder *enc3 = DCN3_1_HPO_DP_STREAM_ENC_FROM_HPO_STREAM_ENC(enc);
uint32_t dmdata_packet_enabled = 0;
- bool sdp_stream_enable = false;
- if (info_frame->vsc.valid) {
+ if (info_frame->vsc.valid)
enc->vpg->funcs->update_generic_info_packet(
enc->vpg,
0, /* packetIndex */
&info_frame->vsc,
true);
- sdp_stream_enable = true;
- }
- if (info_frame->spd.valid) {
+
+ if (info_frame->spd.valid)
enc->vpg->funcs->update_generic_info_packet(
enc->vpg,
2, /* packetIndex */
&info_frame->spd,
true);
- sdp_stream_enable = true;
- }
- if (info_frame->hdrsmd.valid) {
+
+ if (info_frame->hdrsmd.valid)
enc->vpg->funcs->update_generic_info_packet(
enc->vpg,
3, /* packetIndex */
&info_frame->hdrsmd,
true);
- sdp_stream_enable = true;
- }
+
/* enable/disable transmission of packet(s).
* If enabled, packet transmission begins on the next frame
*/
--
cgit v1.2.3
From 7e4ab9fb2b9449ef01977e79157d06c8900f73fd Mon Sep 17 00:00:00 2001
From: Yuan Can
Date: Tue, 27 Sep 2022 13:39:08 +0000
Subject: drm/amd/display: Remove unused struct i2c_id_config_access
After commit 5a8132b9f606 ("drm/amd/display: remove dead dc vbios code"),
no one use struct i2c_id_config_access, so remove it.
Reviewed-by: Rodrigo Siqueira
Signed-off-by: Yuan Can
Signed-off-by: Rodrigo Siqueira
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 7 -------
1 file changed, 7 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index 53b077b40d72..ee0456b5e14e 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -51,13 +51,6 @@
#define LAST_RECORD_TYPE 0xff
#define SMU9_SYSPLL0_ID 0
-struct i2c_id_config_access {
- uint8_t bfI2C_LineMux:4;
- uint8_t bfHW_EngineID:3;
- uint8_t bfHW_Capable:1;
- uint8_t ucAccess;
-};
-
static enum bp_result get_gpio_i2c_info(struct bios_parser *bp,
struct atom_i2c_record *record,
struct graphics_object_i2c_info *info);
--
cgit v1.2.3
From 312b4dc11d4f74bfe03ea25ffe04c1f2fdd13cb9 Mon Sep 17 00:00:00 2001
From: Arunpravin Paneer Selvam
Date: Tue, 4 Oct 2022 07:33:39 -0700
Subject: drm/amdgpu: Fix VRAM BO swap issue
DRM buddy manager allocates the contiguous memory requests in
a single block or multiple blocks. So for the ttm move operation
(incase of low vram memory) we should consider all the blocks to
compute the total memory size which compared with the struct
ttm_resource num_pages in order to verify that the blocks are
contiguous for the eviction process.
v2: Added a Fixes tag
v3: Rewrite the code to save a bit of calculations and
variables (Christian)
Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: Arunpravin Paneer Selvam
Reviewed-by: Christian König
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index b1c455329023..dc262d2c2925 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -424,8 +424,9 @@ error:
static bool amdgpu_mem_visible(struct amdgpu_device *adev,
struct ttm_resource *mem)
{
- uint64_t mem_size = (u64)mem->num_pages << PAGE_SHIFT;
+ u64 mem_size = (u64)mem->num_pages << PAGE_SHIFT;
struct amdgpu_res_cursor cursor;
+ u64 end;
if (mem->mem_type == TTM_PL_SYSTEM ||
mem->mem_type == TTM_PL_TT)
@@ -434,12 +435,18 @@ static bool amdgpu_mem_visible(struct amdgpu_device *adev,
return false;
amdgpu_res_first(mem, 0, mem_size, &cursor);
+ end = cursor.start + cursor.size;
+ while (cursor.remaining) {
+ amdgpu_res_next(&cursor, cursor.size);
- /* ttm_resource_ioremap only supports contiguous memory */
- if (cursor.size != mem_size)
- return false;
+ /* ttm_resource_ioremap only supports contiguous memory */
+ if (end != cursor.start)
+ return false;
+
+ end = cursor.start + cursor.size;
+ }
- return cursor.start + cursor.size <= adev->gmc.visible_vram_size;
+ return end <= adev->gmc.visible_vram_size;
}
/*
--
cgit v1.2.3
From 9a3c6067bd2ee2ca2652fbb0679f422f3c9109f9 Mon Sep 17 00:00:00 2001
From: Philip Yang
Date: Mon, 3 Oct 2022 13:03:26 -0400
Subject: drm/amdgpu: Set vmbo destroy after pt bo is created
Under VRAM usage pression, map to GPU may fail to create pt bo and
vmbo->shadow_list is not initialized, then ttm_bo_release calling
amdgpu_bo_vm_destroy to access vmbo->shadow_list generates below
dmesg and NULL pointer access backtrace:
Set vmbo destroy callback to amdgpu_bo_vm_destroy only after creating pt
bo successfully, otherwise use default callback amdgpu_bo_destroy.
amdgpu: amdgpu_vm_bo_update failed
amdgpu: update_gpuvm_pte() failed
amdgpu: Failed to map bo to gpuvm
amdgpu 0000:43:00.0: amdgpu: Failed to map peer:0000:43:00.0 mem_domain:2
BUG: kernel NULL pointer dereference, address:
RIP: 0010:amdgpu_bo_vm_destroy+0x4d/0x80 [amdgpu]
Call Trace:
ttm_bo_release+0x207/0x320 [amdttm]
amdttm_bo_init_reserved+0x1d6/0x210 [amdttm]
amdgpu_bo_create+0x1ba/0x520 [amdgpu]
amdgpu_bo_create_vm+0x3a/0x80 [amdgpu]
amdgpu_vm_pt_create+0xde/0x270 [amdgpu]
amdgpu_vm_ptes_update+0x63b/0x710 [amdgpu]
amdgpu_vm_update_range+0x2e7/0x6e0 [amdgpu]
amdgpu_vm_bo_update+0x2bd/0x600 [amdgpu]
update_gpuvm_pte+0x160/0x420 [amdgpu]
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x313/0x1130 [amdgpu]
kfd_ioctl_map_memory_to_gpu+0x115/0x390 [amdgpu]
kfd_ioctl+0x24a/0x5b0 [amdgpu]
Signed-off-by: Philip Yang
Reviewed-by: Christian König
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index e6a9b9fc9e0b..2e8f6cd7a729 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -688,13 +688,16 @@ int amdgpu_bo_create_vm(struct amdgpu_device *adev,
* num of amdgpu_vm_pt entries.
*/
BUG_ON(bp->bo_ptr_size < sizeof(struct amdgpu_bo_vm));
- bp->destroy = &amdgpu_bo_vm_destroy;
r = amdgpu_bo_create(adev, bp, &bo_ptr);
if (r)
return r;
*vmbo_ptr = to_amdgpu_bo_vm(bo_ptr);
INIT_LIST_HEAD(&(*vmbo_ptr)->shadow_list);
+ /* Set destroy callback to amdgpu_bo_vm_destroy after vmbo->shadow_list
+ * is initialized.
+ */
+ bo_ptr->tbo.destroy = &amdgpu_bo_vm_destroy;
return r;
}
--
cgit v1.2.3
From 2302d507149f0ae7cc697089ab5675a2d4cf9d2a Mon Sep 17 00:00:00 2001
From: Philip Yang
Date: Mon, 3 Oct 2022 17:53:25 -0400
Subject: drm/amdgpu: Correct amdgpu_amdkfd_total_mem_size calculation
amdkfd_total_mem_size is the size of total GPUs vram plus system memory
to estimate page tables memory usage and leave enough VRAM room for page
tables allocation.
Calculate amdkfd_total_mem_size in amdgpu_amdkfd_device_probe is
incorrect because adev->gmc.real_vram_size is still 0 called from
amdgpu_device_ip_early_init. Move the calculation
to amdgpu_amdkfd_device_init to get the correct VRAM size.
Do reverse calculation in amdgpu_amdkfd_device_fini_sw to support
hot-unplugging GPUs.
Signed-off-by: Philip Yang
Reviewed-by: Felix Kuehling
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
index 9e98f3866edc..03bbfaa51cbc 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -75,9 +75,6 @@ void amdgpu_amdkfd_device_probe(struct amdgpu_device *adev)
return;
adev->kfd.dev = kgd2kfd_probe(adev, vf);
-
- if (adev->kfd.dev)
- amdgpu_amdkfd_total_mem_size += adev->gmc.real_vram_size;
}
/**
@@ -201,6 +198,8 @@ void amdgpu_amdkfd_device_init(struct amdgpu_device *adev)
adev->kfd.init_complete = kgd2kfd_device_init(adev->kfd.dev,
adev_to_drm(adev), &gpu_resources);
+ amdgpu_amdkfd_total_mem_size += adev->gmc.real_vram_size;
+
INIT_WORK(&adev->kfd.reset_work, amdgpu_amdkfd_reset_work);
}
}
@@ -210,6 +209,7 @@ void amdgpu_amdkfd_device_fini_sw(struct amdgpu_device *adev)
if (adev->kfd.dev) {
kgd2kfd_device_exit(adev->kfd.dev);
adev->kfd.dev = NULL;
+ amdgpu_amdkfd_total_mem_size -= adev->gmc.real_vram_size;
}
}
--
cgit v1.2.3
From 17d819e2828cacca2e4c909044eb9798ed379cd2 Mon Sep 17 00:00:00 2001
From: Hamza Mahfooz
Date: Wed, 5 Oct 2022 11:30:38 -0400
Subject: Revert "drm/amdgpu: use dirty framebuffer helper"
This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820.
Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz
Acked-by: Alex Deucher
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 23998f727c7f..1a06b8d724f3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -38,8 +38,6 @@
#include
#include
#include
-#include
-#include
#include
#include
#include
@@ -500,12 +498,6 @@ static const struct drm_framebuffer_funcs amdgpu_fb_funcs = {
.create_handle = drm_gem_fb_create_handle,
};
-static const struct drm_framebuffer_funcs amdgpu_fb_funcs_atomic = {
- .destroy = drm_gem_fb_destroy,
- .create_handle = drm_gem_fb_create_handle,
- .dirty = drm_atomic_helper_dirtyfb,
-};
-
uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev,
uint64_t bo_flags)
{
@@ -1108,10 +1100,8 @@ static int amdgpu_display_gem_fb_verify_and_init(struct drm_device *dev,
if (ret)
goto err;
- if (drm_drv_uses_atomic_modeset(dev))
- ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs_atomic);
- else
- ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
+ ret = drm_framebuffer_init(dev, &rfb->base, &amdgpu_fb_funcs);
+
if (ret)
goto err;
--
cgit v1.2.3
From 6094b9136ca9038b61e9c4b5d25cd5512ce50b34 Mon Sep 17 00:00:00 2001
From: Shirish S
Date: Fri, 7 Oct 2022 20:31:49 +0530
Subject: drm/amd/display: explicitly disable psr_feature_enable appropriately
[Why]
If psr_feature_enable is set to true by default, it continues to be enabled
for non capable links.
[How]
explicitly disable the feature on links that are not capable of the same.
Fixes: 8c322309e48e9 ("drm/amd/display: Enable PSR")
Signed-off-by: Shirish S
Reviewed-by: Leo Li
Reviewed-by: Mario Limonciello
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 5.15+
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
index 8ca10ab3dfc1..26291db0a3cf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c
@@ -60,11 +60,15 @@ static bool link_supports_psrsu(struct dc_link *link)
*/
void amdgpu_dm_set_psr_caps(struct dc_link *link)
{
- if (!(link->connector_signal & SIGNAL_TYPE_EDP))
+ if (!(link->connector_signal & SIGNAL_TYPE_EDP)) {
+ link->psr_settings.psr_feature_enabled = false;
return;
+ }
- if (link->type == dc_connection_none)
+ if (link->type == dc_connection_none) {
+ link->psr_settings.psr_feature_enabled = false;
return;
+ }
if (link->dpcd_caps.psr_info.psr_version == 0) {
link->psr_settings.psr_version = DC_PSR_VERSION_UNSUPPORTED;
--
cgit v1.2.3
From 4f5bdde386d3b8e9317df5562950e1b4fa177599 Mon Sep 17 00:00:00 2001
From: Nicholas Kazlauskas
Date: Fri, 9 Sep 2022 15:24:55 -0400
Subject: drm/amd/display: Update PMFW z-state interface for DCN314
[Why]
Request from PMFW to change the messaging format to specify whether we
support z-state via individual bits.
[How]
Update the args we pass in the support message.
Fixes: d5c6909e7460 ("drm/amd/display: Add DCN314 clock manager")
Tested-by: Daniel Wheeler
Reviewed-by: Charlene Liu
Reviewed-by: Mario Limonciello
Acked-by: Qingqing Zhuo
Signed-off-by: Nicholas Kazlauskas
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org # 6.0
---
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c | 11 +++--------
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 3 ++-
2 files changed, 5 insertions(+), 9 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
index 897105d1c111..ef0795b14a1f 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_smu.c
@@ -339,29 +339,24 @@ void dcn314_smu_set_zstate_support(struct clk_mgr_internal *clk_mgr, enum dcn_zs
if (!clk_mgr->smu_present)
return;
- if (!clk_mgr->base.ctx->dc->debug.enable_z9_disable_interface &&
- (support == DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY))
- support = DCN_ZSTATE_SUPPORT_DISALLOW;
-
-
// Arg[15:0] = 8/9/0 for Z8/Z9/disallow -> existing bits
// Arg[16] = Disallow Z9 -> new bit
switch (support) {
case DCN_ZSTATE_SUPPORT_ALLOW:
msg_id = VBIOSSMC_MSG_AllowZstatesEntry;
- param = 9;
+ param = (1 << 10) | (1 << 9) | (1 << 8);
break;
case DCN_ZSTATE_SUPPORT_DISALLOW:
msg_id = VBIOSSMC_MSG_AllowZstatesEntry;
- param = 8;
+ param = 0;
break;
case DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY:
msg_id = VBIOSSMC_MSG_AllowZstatesEntry;
- param = 0x00010008;
+ param = (1 << 10);
break;
default: //DCN_ZSTATE_SUPPORT_UNKNOWN
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
index 70b647b9b4d3..d0ad72caead2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c
@@ -881,7 +881,8 @@ static const struct dc_plane_cap plane_cap = {
};
static const struct dc_debug_options debug_defaults_drv = {
- .disable_z10 = true, /*hw not support it*/
+ .disable_z10 = false,
+ .enable_z9_disable_interface = true,
.disable_dmcu = true,
.force_abm_enable = false,
.timing_trace = false,
--
cgit v1.2.3
From 99243fd1f3ca40d487209ac76241de0478962a9d Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Tue, 27 Sep 2022 12:35:10 -0400
Subject: Revert "drm/amd/display: skip commit minimal transition state"
This reverts commit e4e481e4d838f30985dd46d43ed195110ed265f5.
[Why & How]
The reverted commit creates memory leak and causes issue
upon driver install.
Tested-by: Daniel Wheeler
Reviewed-by: Martin Leung
Acked-by: Qingqing Zhuo
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 20 --------------------
1 file changed, 20 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 40a34b600c8e..b5058a2ce7e8 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3650,30 +3650,10 @@ static bool commit_minimal_transition_state(struct dc *dc,
bool temp_subvp_policy;
enum dc_status ret = DC_ERROR_UNEXPECTED;
unsigned int i, j;
- unsigned int pipe_in_use = 0;
if (!transition_context)
return false;
- /* check current pipes in use*/
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct pipe_ctx *pipe = &transition_base_context->res_ctx.pipe_ctx[i];
-
- if (pipe->plane_state)
- pipe_in_use++;
- }
-
- /* When the OS add a new surface if we have been used all of pipes with odm combine
- * and mpc split feature, it need use commit_minimal_transition_state to transition safely.
- * After OS exit MPO, it will back to use odm and mpc split with all of pipes, we need
- * call it again. Otherwise return true to skip.
- *
- * Reduce the scenarios to use dc_commit_state_no_check in the stage of flip. Especially
- * enter/exit MPO when DCN still have enough resources.
- */
- if (pipe_in_use != dc->res_pool->pipe_count)
- return true;
-
if (!dc->config.is_vmin_only_asic) {
tmp_mpc_policy = dc->debug.pipe_split_policy;
dc->debug.pipe_split_policy = MPC_SPLIT_AVOID;
--
cgit v1.2.3
From eae2331899f9dcc923d37d1d753f2de847c92359 Mon Sep 17 00:00:00 2001
From: Vladimir Stempen
Date: Thu, 22 Sep 2022 15:03:05 -0400
Subject: drm/amd/display: properly configure DCFCLK when enable/disable
Freesync
[Why]
Bandwidth validation is using Freesync parameters
from previous Freesync state.
Bandwidth validation ignores DCFCLK calculated
after Freesync parameters are configured
[How]
Set Freesync bandwidth parameters to its default
state before running bandwidth validation.
Take DCFCLK calculated after Freesync bandwidth
parameters are assigned and bandwidth is
recalculated.
Tested-by: Daniel Wheeler
Reviewed-by: Martin Leung
Reviewed-by: Nevenko Stupar
Reviewed-by: Jun Lei
Acked-by: Qingqing Zhuo
Signed-off-by: Vladimir Stempen
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c | 7 +++++++
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 7 ++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
index 9585b25f10e5..a88dd7b3d1c1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
@@ -1805,6 +1805,13 @@ bool dcn32_validate_bandwidth(struct dc *dc,
int pipe_cnt = 0;
display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_KERNEL);
struct mall_temp_config mall_temp_config;
+
+ /* To handle Freesync properly, setting FreeSync DML parameters
+ * to its default state for the first stage of validation
+ */
+ context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching = false;
+ context->bw_ctx.dml.soc.dram_clock_change_requirement_final = true;
+
DC_LOGGER_INIT(dc->ctx->logger);
/* For fast validation, there are situations where a shallow copy of
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 6bdd509d292a..819de0f11012 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -1769,6 +1769,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
int i, pipe_idx, vlevel_temp = 0;
double dcfclk = dcn3_2_soc.clock_limits[0].dcfclk_mhz;
double dcfclk_from_validation = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
+ double dcfclk_from_fw_based_mclk_switching = dcfclk_from_validation;
bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] !=
dm_dram_clock_change_unsupported;
unsigned int dummy_latency_index = 0;
@@ -1804,7 +1805,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, false);
maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb;
- dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
+ dcfclk_from_fw_based_mclk_switching = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] !=
dm_dram_clock_change_unsupported;
}
@@ -1890,6 +1891,10 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
pipes[0].clks_cfg.dcfclk_mhz = dcfclk_from_validation;
pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
+ if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+ pipes[0].clks_cfg.dcfclk_mhz = dcfclk_from_fw_based_mclk_switching;
+ }
+
if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) {
min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed;
min_dram_speed_mts_margin = 160;
--
cgit v1.2.3
From 5ff32b52995155f91de582124485d0f0f8881363 Mon Sep 17 00:00:00 2001
From: Martin Leung
Date: Tue, 27 Sep 2022 18:13:38 -0400
Subject: drm/amd/display: zeromem mypipe heap struct before using it
[Why & How]
bug was caused when moving variable from stack to
heap because it was reusable and garbage was left
over, so we need to zero mem
Fixes: 7acc487ab57e ("drm/amd/display: reduce stack size in dcn32 dml (v2)")
Tested-by: Daniel Wheeler
Reviewed-by: Rodrigo Siqueira
Acked-by: Qingqing Zhuo
Signed-off-by: Martin Leung
Cc: Alex Deucher
Signed-off-by: Alex Deucher
Cc: stable@vger.kernel.org
---
drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
index 11d5750e15af..5b91660a6496 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
@@ -733,6 +733,8 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman
mode_lib->vba.FCLKChangeLatency, v->UrgentLatency,
mode_lib->vba.SREnterPlusExitTime);
+ memset(&v->dummy_vars.DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.myPipe, 0, sizeof(DmlPipe));
+
v->dummy_vars.DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.myPipe.Dppclk = mode_lib->vba.DPPCLK[k];
v->dummy_vars.DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.myPipe.Dispclk = mode_lib->vba.DISPCLK;
v->dummy_vars.DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.myPipe.PixelClock = mode_lib->vba.PixelClock[k];
--
cgit v1.2.3
From 2fd23d467d4fb4e9bb3c3758ee49799f690f5f72 Mon Sep 17 00:00:00 2001
From: Josip Pavic
Date: Fri, 23 Sep 2022 15:29:07 -0400
Subject: drm/amd/display: do not compare integers of different widths
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Alvin Lee
Tested-by: Daniel Wheeler
Acked-by: Qingqing Zhuo
Signed-off-by: Josip Pavic
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index 955ca273cfe1..426b07edb426 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -206,8 +206,7 @@ static bool dcn32_check_no_memory_request_for_cab(struct dc *dc)
*/
static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *ctx)
{
- uint8_t i;
- int j;
+ int i, j;
struct dc_stream_state *stream = NULL;
struct dc_plane_state *plane = NULL;
uint32_t cursor_size = 0;
--
cgit v1.2.3
From c19d3eace484ca5627817a1de85af1de06d538b6 Mon Sep 17 00:00:00 2001
From: Dillon Varone
Date: Wed, 28 Sep 2022 16:33:47 -0400
Subject: drm/amd/display: Use correct pixel clock to program DTBCLK DTO's
[Why?]
Currently phy_pix_clk is used to program DTO's which is incorrect.
[How?]
Use the timing pixel clock to program DTO's correctly.
Reviewed-by: Martin Leung
Tested-by: Daniel Wheeler
Acked-by: Qingqing Zhuo
Signed-off-by: Dillon Varone
Signed-off-by: Alex Deucher
---
drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c b/drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c
index 7d3147175ca2..153a88381f2c 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c
@@ -111,7 +111,7 @@ static void setup_hpo_dp_stream_encoder(struct pipe_ctx *pipe_ctx)
enum phyd32clk_clock_source phyd32clk = get_phyd32clk_src(pipe_ctx->stream->link);
dto_params.otg_inst = tg->inst;
- dto_params.pixclk_khz = pipe_ctx->stream->phy_pix_clk;
+ dto_params.pixclk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10;
dto_params.num_odm_segments = get_odm_segment_count(pipe_ctx);
dto_params.timing = &pipe_ctx->stream->timing;
dto_params.ref_dtbclk_khz = dc->clk_mgr->funcs->get_dtb_ref_clk_frequency(dc->clk_mgr);
--
cgit v1.2.3
From e50f67cf5e168d92e24cfb61fb11f2f0a35708cd Mon Sep 17 00:00:00 2001
From: Aurabindo Pillai
Date: Thu, 29 Sep 2022 11:15:12 -0400
Subject: drm/amd/display: Do not trigger timing sync for phantom pipes
[Why&How]
Doing timing sync seqence for phantom pipes will not go through since
they are not fully programmed like normal pipes. Skip the sequence on
such pipes
Tested-by: Daniel Wheeler
Reviewed-by: Alvin Lee
Acked-by: Qingqing Zhuo
Signed-off-by: Aurabindo Pillai